From: Venkateshwar Rao Gannavarapu <venkateshwar.rao.gannavarapu@xilinx.com> To: <laurent.pinchart@ideasonboard.com>, <dri-devel@lists.freedesktop.org> Cc: <airlied@linux.ie>, <daniel@ffwll.ch>, <linux-kernel@vger.kernel.org>, <vgannava@xilinx.com>, Venkateshwar Rao Gannavarapu <venkateshwar.rao.gannavarapu@xilinx.com> Subject: [LINUX PATCH 0/2] Add Xilinx DSI-Tx DRM driver Date: Thu, 12 May 2022 19:23:11 +0530 [thread overview] Message-ID: <1652363593-45799-1-git-send-email-venkateshwar.rao.gannavarapu@xilinx.com> (raw) MIPI DSI TX subsystem allows you to quickly create systems based on the MIPI protocol. It interfaces between the video processing subsystems and MIPI-based displays. An internal high-speed physical layer design, D-PHY, is provided to allow direct connection to display peripherals. The subsystem consists of the following sub-blocks: - MIPI D-PHY - MIPI DSI TX Controller - AXI Crossbar Please refer pg238 [1]. The DSI TX Controller receives stream of image data through an input stream interface. At design time, this subsystem can be configured to number of lanes and pixel format. This patch series adds the dt-binding and DRM driver for Xilinx DSI-Tx soft IP. References: [1]: https://www.xilinx.com/support/documentation/ip_documentation/mipi_dsi_tx_subsystem/v2_0/pg238-mipi-dsi-tx.pdf Venkateshwar Rao Gannavarapu (2): dt-bindings: display: xlnx: Add DSI 2.0 Tx subsystem documentation drm: xlnx: dsi: driver for Xilinx DSI Tx subsystem .../bindings/display/xlnx/xlnx,dsi-tx.yaml | 105 +++++ drivers/gpu/drm/xlnx/Kconfig | 14 + drivers/gpu/drm/xlnx/Makefile | 1 + drivers/gpu/drm/xlnx/xlnx_dsi.c | 456 +++++++++++++++++++++ 4 files changed, 576 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,dsi-tx.yaml create mode 100644 drivers/gpu/drm/xlnx/xlnx_dsi.c -- 1.8.3.1
WARNING: multiple messages have this Message-ID (diff)
From: Venkateshwar Rao Gannavarapu <venkateshwar.rao.gannavarapu@xilinx.com> To: <laurent.pinchart@ideasonboard.com>, <dri-devel@lists.freedesktop.org> Cc: airlied@linux.ie, vgannava@xilinx.com, Venkateshwar Rao Gannavarapu <venkateshwar.rao.gannavarapu@xilinx.com>, linux-kernel@vger.kernel.org Subject: [LINUX PATCH 0/2] Add Xilinx DSI-Tx DRM driver Date: Thu, 12 May 2022 19:23:11 +0530 [thread overview] Message-ID: <1652363593-45799-1-git-send-email-venkateshwar.rao.gannavarapu@xilinx.com> (raw) MIPI DSI TX subsystem allows you to quickly create systems based on the MIPI protocol. It interfaces between the video processing subsystems and MIPI-based displays. An internal high-speed physical layer design, D-PHY, is provided to allow direct connection to display peripherals. The subsystem consists of the following sub-blocks: - MIPI D-PHY - MIPI DSI TX Controller - AXI Crossbar Please refer pg238 [1]. The DSI TX Controller receives stream of image data through an input stream interface. At design time, this subsystem can be configured to number of lanes and pixel format. This patch series adds the dt-binding and DRM driver for Xilinx DSI-Tx soft IP. References: [1]: https://www.xilinx.com/support/documentation/ip_documentation/mipi_dsi_tx_subsystem/v2_0/pg238-mipi-dsi-tx.pdf Venkateshwar Rao Gannavarapu (2): dt-bindings: display: xlnx: Add DSI 2.0 Tx subsystem documentation drm: xlnx: dsi: driver for Xilinx DSI Tx subsystem .../bindings/display/xlnx/xlnx,dsi-tx.yaml | 105 +++++ drivers/gpu/drm/xlnx/Kconfig | 14 + drivers/gpu/drm/xlnx/Makefile | 1 + drivers/gpu/drm/xlnx/xlnx_dsi.c | 456 +++++++++++++++++++++ 4 files changed, 576 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,dsi-tx.yaml create mode 100644 drivers/gpu/drm/xlnx/xlnx_dsi.c -- 1.8.3.1
next reply other threads:[~2022-05-12 13:53 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-12 13:53 Venkateshwar Rao Gannavarapu [this message] 2022-05-12 13:53 ` [LINUX PATCH 0/2] Add Xilinx DSI-Tx DRM driver Venkateshwar Rao Gannavarapu 2022-05-12 13:53 ` [LINUX PATCH 1/2] dt-bindings: display: xlnx: Add DSI 2.0 Tx subsystem documentation Venkateshwar Rao Gannavarapu 2022-05-12 13:53 ` Venkateshwar Rao Gannavarapu 2022-05-13 13:39 ` Laurent Pinchart 2022-05-13 13:39 ` Laurent Pinchart 2022-05-12 13:53 ` [LINUX PATCH 2/2] drm: xlnx: dsi: driver for Xilinx DSI Tx subsystem Venkateshwar Rao Gannavarapu 2022-05-12 13:53 ` Venkateshwar Rao Gannavarapu 2022-05-13 11:05 ` Sam Ravnborg 2022-05-13 11:05 ` Sam Ravnborg 2022-06-12 21:21 ` Laurent Pinchart 2022-06-12 21:21 ` Laurent Pinchart 2022-06-13 5:53 ` Sam Ravnborg 2022-06-13 5:53 ` Sam Ravnborg 2022-06-12 21:28 ` Laurent Pinchart 2022-06-12 21:28 ` Laurent Pinchart 2022-05-13 13:39 ` Laurent Pinchart 2022-05-13 13:39 ` Laurent Pinchart
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1652363593-45799-1-git-send-email-venkateshwar.rao.gannavarapu@xilinx.com \ --to=venkateshwar.rao.gannavarapu@xilinx.com \ --cc=airlied@linux.ie \ --cc=daniel@ffwll.ch \ --cc=dri-devel@lists.freedesktop.org \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-kernel@vger.kernel.org \ --cc=vgannava@xilinx.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.