Re: [PATCH 03/21] dt-bindings: clock: Add Google gs101 clock management unit bindings

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 05/10/2023 17:56, Peter Griffin wrote:
> Provide dt-schema documentation for Google gs101 SoC clock controller.
> 
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  .../bindings/clock/google,gs101-clock.yaml    | 109 ++++++++++++++++++
>  1 file changed, 109 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
> new file mode 100644
> index 000000000000..a28d05d88afe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
> @@ -0,0 +1,109 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Google GS101 SoC clock controller
> +
> +maintainers:
> +  - Peter Griffin <peter.griffin@linaro.org>
> +
> +description: |
> +  Google GS101 clock controller is comprised of several CMU units, generating
> +  clocks for different domains. Those CMU units are modeled as separate device
> +  tree nodes, and might depend on each other. The root clock in that clock tree
> +  is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate
> +  clock in dts.
> +
> +  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
> +  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
> +
> +  Each clock is assigned an identifier and client nodes can use this identifier
> +  to specify the clock which they consume. All clocks available for usage
> +  in clock consumer nodes are defined as preprocessor macros in
> +  'dt-bindings/clock/gs101.h' header.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - google,gs101-cmu-top
> +      - google,gs101-cmu-apm
> +      - google,gs101-cmu-misc
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 5

I see max 2 clocks.

> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 5
> +
> +  "#clock-cells":
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: google,gs101-cmu-top
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (24.576 MHz)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: google,gs101-cmu-misc
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (24.576 MHz)
> +            - description: Misc bus clock (from CMU_TOP)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +            - const: dout_cmu_misc_bus

What about google,gs101-cmu-apm?

> +
> +required:

"required:" go before "allOf:"

> +  - compatible
> +  - "#clock-cells"
> +  - clocks
> +  - clock-names
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  # Clock controller node for CMU_TOP
> +  - |
> +    #include <dt-bindings/interrupt-controller/gs101.h>
> +    soc {
> +    #address-cells = <2>;
> +    #size-cells = <1>;

Messed indentation.

> +
> +...

Best regards,
Krzysztof