* [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
@ 2011-01-06 6:43 Balaji Venkatachalam
2011-01-06 14:56 ` Michał Mirosław
0 siblings, 1 reply; 14+ messages in thread
From: Balaji Venkatachalam @ 2011-01-06 6:43 UTC (permalink / raw)
To: netdev; +Cc: mohan, blue.cube, lanconelli.claudio, Sriram Subramanian
From: Balaji Venkatachalam <balaji.v@thotakaa.com>
These patches add support for Microchip enc424j600 ethernet chip
controlled via SPI.
I tested it on my custom board with ARM9 (Freescale i.MX233) with
Kernel 2.6.31.14.
Any comments are welcome.
Signed-off-by: Balaji Venkatachalam <balaji.v@thotakaa.com>
---
diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600.c
b/drivers/net/enc424j600.c
--- a/drivers/net/enc424j600.c 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/enc424j600.c 2011-01-06 09:39:17.000000000 +0530
@@ -0,0 +1,1694 @@
+/*
+ * Microchip ENC424J600 ethernet driver (MAC + PHY) on SPI bus
+ *
+ * Copyright (C) 2011 Thotaka Technologies Pvt Ltd
+ * Author: Balaji Venkatachalam <balaji.v@thotakaa.com>
+ * based on enc424j600.c written by Kuba Marek
+ * based on enc28j60.c written by Claudio Lanconelli
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+
+#include "enc424j600_hw.h"
+
+#define DRV_NAME "enc424j600"
+#define DRV_VERSION "1.24"
+
+#define ENC424J600_MSG_DEFAULT \
+ (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
+
+#define SPI_TRANSFER_BUF_LEN (4 + MAX_FRAMELEN)
+#define TX_TIMEOUT (4 * HZ)
+
+/* Max TX retries in case of collision as suggested by errata datasheet */
+#define MAX_TX_RETRYCOUNT 16
+
+#define SPI_OPLEN 1
+
+#define SRAMSIZE 0x6000
+#define TXSTART 0x0000
+#define RXSTART 0x1600
+
+static int enc424j600_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */
+
+enum {
+ RXFILTER_NORMAL,
+ RXFILTER_MULTI,
+ RXFILTER_PROMISC
+};
+
+/* Driver local data */
+struct enc424j600_net {
+ struct net_device *netdev;
+ struct spi_device *spi;
+ struct mutex lock;
+ struct sk_buff *tx_skb;
+ struct work_struct tx_work;
+ struct work_struct irq_work;
+ struct work_struct setrx_work;
+ struct work_struct restart_work;
+ u8 bank; /* current register bank selected */
+ u16 next_pk_ptr; /* next packet pointer within FIFO */
+ u16 max_pk_counter; /* statistics: max packet counter */
+ u16 tx_retry_count;
+ bool hw_enable;
+ bool full_duplex;
+ bool autoneg;
+ bool speed100;
+ int rxfilter;
+ u32 msg_enable;
+
+ u8 *spi_rx_buf;
+ u8 *spi_tx_buf;
+ dma_addr_t spi_tx_dma;
+ dma_addr_t spi_rx_dma;
+};
+
+/* use ethtool to change the level for any given device */
+static struct {
+ u32 msg_enable;
+} debug = {
+-1};
+
+static int enc424j600_spi_trans(struct enc424j600_net *priv, int len)
+{
+ /*modified to suit half duplexed spi */
+ struct spi_transfer tt = {
+ .tx_buf = priv->spi_tx_buf,
+ .len = SPI_OPLEN,
+ };
+ struct spi_transfer tr = {
+ .rx_buf = priv->spi_rx_buf,
+ .len = len,
+ };
+ struct spi_message m;
+ int ret;
+
+ spi_message_init(&m);
+
+ spi_message_add_tail(&tt, &m);
+ spi_message_add_tail(&tr, &m);
+
+ ret = spi_sync(priv->spi, &m);
+
+ if (ret == 0)
+ memcpy(priv->spi_rx_buf, tr.rx_buf, len);
+
+ if (ret)
+ dev_err(&priv->spi->dev,
+ "spi transfer failed: ret = %d\n", ret);
+ return ret;
+}
+
+/*
+ * Read data from chip SRAM.
+ * window = 0 for Receive Buffer
+ * = 1 for User Defined area
+ * = 2 for General Purpose area
+ */
+static int enc424j600_read_sram(struct enc424j600_net *priv,
+ u8 *dst, int len, u16 srcaddr, int window)
+{
+ int ret;
+
+ if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+ return -EINVAL;
+
+ /* First set the write pointer as per selected window */
+ if (window == 1)
+ priv->spi_tx_buf[0] = WRXRDPT;
+ else if (window == 2)
+ priv->spi_tx_buf[0] = WUDARDPT;
+ else if (window == 3)
+ priv->spi_tx_buf[0] = WGPRDPT;
+
+ priv->spi_tx_buf[1] = srcaddr & 0xFF;
+ priv->spi_tx_buf[2] = srcaddr >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+
+ /* Transfer the data */
+ if (window == 1)
+ priv->spi_tx_buf[0] = RRXDATA;
+ else if (window == 2)
+ priv->spi_tx_buf[0] = RUDADATA;
+ else if (window == 3)
+ priv->spi_tx_buf[0] = RGPDATA;
+
+ ret = enc424j600_spi_trans(priv, len + 1); /*READ*/
+
+ /* Copy the data to the tx buffer */
+ memcpy(dst, &priv->spi_rx_buf[0], len);
+
+ return ret;
+}
+
+/*
+ * Write data to chip SRAM.
+ * window = 1 for RX
+ * window = 2 for User Data
+ * window = 3 for GP
+ */
+static int enc424j600_write_sram(struct enc424j600_net *priv,
+ const u8 *src, int len, u16 dstaddr,
+ int window)
+{
+ int ret;
+
+ if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+ return -EINVAL;
+
+ /* First set the general purpose write pointer */
+ if (window == 1)
+ priv->spi_tx_buf[0] = WRXWRPT;
+ else if (window == 2)
+ priv->spi_tx_buf[0] = WUDAWRPT;
+ else if (window == 3)
+ priv->spi_tx_buf[0] = WGPWRPT;
+
+ priv->spi_tx_buf[1] = dstaddr & 0xFF;
+ priv->spi_tx_buf[2] = dstaddr >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+
+ /* Copy the data to the tx buffer */
+ memcpy(&priv->spi_tx_buf[1], src, len);
+
+ /* Transfer the data */
+ if (window == 1)
+ priv->spi_tx_buf[0] = WRXDATA;
+ else if (window == 2)
+ priv->spi_tx_buf[0] = WUDADATA;
+ else if (window == 3)
+ priv->spi_tx_buf[0] = WGPDATA;
+
+ ret = spi_write(priv->spi, priv->spi_tx_buf, len + 1);
+
+ return ret;
+}
+
+/*
+ * Select the current register bank if necessary to be able to read @addr.
+ */
+static void enc424j600_set_bank(struct enc424j600_net *priv, u8 addr)
+{
+ u8 b = (addr & BANK_MASK) >> BANK_SHIFT;
+
+ /* These registers are present in all banks, no need to switch bank */
+ if (addr >= EUDASTL && addr <= ECON1H)
+ return;
+ if (priv->bank == b)
+ return;
+
+ priv->spi_tx_buf[0] = BXSEL(b);
+
+ enc424j600_spi_trans(priv, 1); /*WRITE*/
+
+ priv->bank = b;
+}
+
+/*
+ * Set bits in an 8bit SFR.
+ */
+static void enc424j600_set_bits(struct enc424j600_net *priv, u8 addr, u8 mask)
+{
+ enc424j600_set_bank(priv, addr);
+ priv->spi_tx_buf[0] = BFS(addr);
+ priv->spi_tx_buf[1] = mask;
+ spi_write(priv->spi, priv->spi_tx_buf, 2);
+}
+
+/*
+ * Clear bits in an 8bit SFR.
+ */
+static void enc424j600_clear_bits(struct enc424j600_net *priv, u8
addr, u8 mask)
+{
+ enc424j600_set_bank(priv, addr);
+ priv->spi_tx_buf[0] = BFC(addr);
+ priv->spi_tx_buf[1] = mask;
+ spi_write(priv->spi, priv->spi_tx_buf, 2);
+}
+
+/*
+ * Write a 8bit special function register.
+ * The @sfr parameters takes address of the register.
+ * Uses banked write instruction.
+ */
+static int enc424j600_write_8b_sfr(struct enc424j600_net *priv, u8
sfr, u8 data)
+{
+ int ret;
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = data & 0xFF;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 2);
+
+ return ret;
+}
+
+/*
+ * Read a 8bit special function register.
+ * The @sfr parameters takes address of the register.
+ * Uses banked read instruction.
+ */
+static int enc424j600_read_8b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u8 *data)
+{
+ int ret;
+
+ enc424j600_set_bank(priv, sfr);
+ priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
+ ret = enc424j600_spi_trans(priv, 2); /*READ*/
+ *data = priv->spi_rx_buf[0];
+
+ return ret;
+}
+
+/*
+ * Write a 16bit special function register.
+ * The @sfr parameters takes address of the low byte of the register.
+ * Takes care of the endiannes & buffers.
+ * Uses banked write instruction.
+ */
+
+static int enc424j600_write_16b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u16 data)
+{
+ int ret;
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = data & 0xFF;
+ priv->spi_tx_buf[2] = data >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+ if (ret && netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
+ __func__, ret);
+
+ return ret;
+}
+
+/*
+ * Read a 16bit special function register.
+ * The @sfr parameters takes address of the low byte of the register.
+ * Takes care of the endiannes & buffers.
+ * Uses banked read instruction.
+ */
+static int enc424j600_read_16b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u16 *data)
+{
+ int ret;
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = 0;
+ priv->spi_tx_buf[2] = 0;
+ priv->spi_tx_buf[3] = 0;
+ ret = enc424j600_spi_trans(priv, 3); /*READ*/
+
+ *data = priv->spi_rx_buf[0] | priv->spi_rx_buf[1] << (u16) 8;
+
+ return ret;
+}
+
+/*
+ * Reset the enc424j600.
+ * TODO: What if we get stuck on non-working spi with the initial
+ * test access to EUDAST ?
+ */
+static void enc424j600_soft_reset(struct enc424j600_net *priv)
+{
+ u8 estath;
+ u16 eudast;
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ do {
+ enc424j600_write_16b_sfr(priv, EUDASTL, EUDAST_TEST_VAL);
+ enc424j600_read_16b_sfr(priv, EUDASTL, &eudast);
+ } while (eudast != EUDAST_TEST_VAL);
+
+ do {
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ } while (!estath & CLKRDY);
+
+ priv->spi_tx_buf[0] = SETETHRST;
+ enc424j600_spi_trans(priv, 1);
+
+ udelay(50);
+
+ enc424j600_read_16b_sfr(priv, EUDASTL, &eudast);
+ if (netif_msg_hw(priv) && eudast != 0)
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() EUDASTL is not zero!\n", __func__);
+
+ udelay(500);
+}
+
+static unsigned long msec20_to_jiffies;
+
+/*
+ * Wait for bits in register to become equal to @readyMask, but at most 20ms.
+ */
+static int poll_ready(struct enc424j600_net *priv,
+ u8 reg, u8 mask, u8 readyMask)
+{
+ unsigned long timeout = jiffies + msec20_to_jiffies;
+ u8 value;
+ /* 20 msec timeout read */
+ enc424j600_read_8b_sfr(priv, reg, &value);
+ while ((value & mask) != readyMask) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_read_8b_sfr(priv, reg, &value);
+ }
+
+ return 0;
+}
+
+/*
+ * PHY register read
+ * PHY registers are not accessed directly, but through the MII
+ */
+static int enc424j600_phy_read(struct enc424j600_net *priv,
+ u16 address, u16 *data)
+{
+ int ret;
+
+ enc424j600_write_16b_sfr(priv, MIREGADRL,
+ address | (MIREGADRH_VAL << 8));
+ enc424j600_write_16b_sfr(priv, MICMDL, MIIRD);
+ udelay(26);
+ ret = !poll_ready(priv, MISTATL, BUSY, 0);
+ enc424j600_write_16b_sfr(priv, MICMDL, 0);
+ enc424j600_read_16b_sfr(priv, MIRDL, data);
+ return ret;
+}
+
+static int enc424j600_phy_write(struct enc424j600_net *priv, u16 address,
+ u16 data)
+{
+ enc424j600_write_16b_sfr(priv, MIREGADRL,
+ address | (MIREGADRH_VAL << 8));
+ enc424j600_write_16b_sfr(priv, MIWRL, data);
+ udelay(26);
+ return !poll_ready(priv, MISTATL, BUSY, 0);
+}
+
+/*
+ * Read the hardware MAC address to dev->dev_addr.
+ */
+static int enc424j600_get_hw_macaddr(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ u16 maadr1, maadr2, maadr3;
+
+ mutex_lock(&priv->lock);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MAC address to %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ enc424j600_read_16b_sfr(priv, MAADR3L, &maadr3);
+ ndev->dev_addr[5] = maadr3 >> 8;
+ ndev->dev_addr[4] = maadr3 & 0xff;
+ enc424j600_read_16b_sfr(priv, MAADR2L, &maadr2);
+ ndev->dev_addr[3] = maadr2 >> 8;
+ ndev->dev_addr[2] = maadr2 & 0xff;
+ enc424j600_read_16b_sfr(priv, MAADR1L, &maadr1);
+ ndev->dev_addr[1] = maadr1 >> 8;
+ ndev->dev_addr[0] = maadr1 & 0xff;
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+/*
+ * Program the hardware MAC address from dev->dev_addr.
+ */
+static int enc424j600_set_hw_macaddr(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+
+ mutex_lock(&priv->lock);
+
+ if (priv->hw_enable) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() Hardware must be disabled to set "
+ "Mac address\n", __func__);
+ mutex_unlock(&priv->lock);
+ return -EBUSY;
+ }
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MAC address to %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ enc424j600_write_16b_sfr(priv, MAADR3L,
+ ndev->dev_addr[4] | ndev->dev_addr[5] << 8);
+ enc424j600_write_16b_sfr(priv, MAADR2L,
+ ndev->dev_addr[2] | ndev->dev_addr[3] << 8);
+ enc424j600_write_16b_sfr(priv, MAADR1L,
+ ndev->dev_addr[0] | ndev->dev_addr[1] << 8);
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+/*
+ * Store the new hardware address in dev->dev_addr, and update the MAC.
+ */
+static int enc424j600_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *address = addr;
+
+ if (netif_running(dev))
+ return -EBUSY;
+ if (!is_valid_ether_addr(address->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
+ return enc424j600_set_hw_macaddr(dev);
+}
+
+u8 nolock_regb_read(struct enc424j600_net *priv, u8 address)
+{
+ u8 data;
+ enc424j600_read_8b_sfr(priv, address, &data);
+ return data;
+}
+
+u16 nolock_regw_read(struct enc424j600_net *priv, u8 address)
+{
+ u16 data;
+ enc424j600_read_16b_sfr(priv, address, &data);
+ return data;
+}
+
+/*Debug routine to dump useful register contents*/
+static void enc424j600_dump_regs(struct enc424j600_net *priv, const char *msg)
+{
+
+ mutex_lock(&priv->lock);
+ printk(KERN_DEBUG DRV_NAME " %s\n"
+ "Cntrl: ECON1H ECON1L ECON2H ECON2L ESTATH ESTATL EIRH "
+ "EIRL EIEH EIEL\n"
+ " 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x "
+ "0x%02x 0x%02x 0x%02x 0x%02x\n"
+ "MAC : MACON1 MACON2\n"
+ " 0x%04x 0x%04x\n"
+ "Rx : ERXST ERXTAIL ERXHEAD ERXWRPT ERXRDPT ERXFCON MAMXFL\n"
+ " 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n"
+ "Tx : ETXST ETXLEN MACLCON1 \n"
+ " 0x%04x 0x%04x 0x%02x\n",
+ msg,
+ nolock_regb_read(priv, ECON1H), nolock_regb_read(priv, ECON1L),
+ nolock_regb_read(priv, ECON2H), nolock_regb_read(priv, ECON2L),
+ nolock_regb_read(priv, ESTATH), nolock_regb_read(priv, ESTATL),
+ nolock_regb_read(priv, EIRH), nolock_regb_read(priv, EIRL),
+ nolock_regb_read(priv, EIEH), nolock_regb_read(priv, EIEL),
+ nolock_regw_read(priv, MACON1L), nolock_regw_read(priv, MACON2L),
+ nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXTAILL),
+ nolock_regw_read(priv, ERXHEADL),
+ nolock_regw_read(priv, ERXWRPTL), nolock_regw_read(priv,
+ ERXRDPTL),
+ nolock_regw_read(priv, ERXFCONL), nolock_regw_read(priv,
+ MAMXFLL),
+ nolock_regw_read(priv, ETXSTL), nolock_regw_read(priv, ETXLENL),
+ nolock_regw_read(priv, MACLCONL));
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * TODO: Check the functionality
+ * Low power mode shrinks power consumption about 100x, so we'd like
+ * the chip to be in that mode whenever it's inactive. (However, we
+ * can't stay in lowpower mode during suspend with WOL active.)
+ */
+static void enc424j600_lowpower(struct enc424j600_net *priv, bool is_low)
+{
+
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev, "%s power...\n",
+ is_low ? "low" : "high");
+
+#if 0
+ mutex_lock(&priv->lock);
+ if (is_low) {
+ nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+ poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
+ poll_ready(priv, ECON1, ECON1_TXRTS, 0);
+ /* ECON2_VRPS was set during initialization */
+ nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
+ } else {
+ nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
+ poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
+ /* caller sets ECON1_RXEN */
+ }
+ mutex_unlock(&priv->lock);
+#endif
+}
+
+/* Waits for autonegotiation to complete and sets FULDPX bit in macon2. */
+static void enc424j600_wait_for_autoneg(struct enc424j600_net *priv)
+{
+ u16 phstat1;
+ do {
+ enc424j600_phy_read(priv, PHSTAT1, &phstat1);
+ } while (!(phstat1 & ANDONE));
+}
+
+/*
+ * Reset and initialize the chip, but don't enable interrupts and don't
+ * start receiving yet.
+ */
+static int enc424j600_hw_init(struct enc424j600_net *priv)
+{
+ u8 eidledl;
+ u16 phcon1;
+ u16 macon2;
+ u16 econ1l;
+ /*priv->autoneg = 1;*/
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
+ priv->autoneg ? "Autoneg" : (priv->
+ full_duplex ? "FullDuplex" :
+ "HalfDuplex"));
+
+ mutex_lock(&priv->lock);
+
+ priv->bank = 0;
+ priv->hw_enable = false;
+ priv->tx_retry_count = 0;
+ priv->max_pk_counter = 0;
+ priv->rxfilter = RXFILTER_NORMAL;
+ /*
+ * TODO: how abt autoneg?
+ */
+ enc424j600_soft_reset(priv);
+
+ /*
+ * Check the device id and silicon revision id.
+ */
+ enc424j600_read_8b_sfr(priv, EIDLEDL, &eidledl);
+
+ if ((eidledl & DEVID_MASK) >> DEVID_SHIFT != ENC424J600_DEV_ID) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() Invalid device ID: %d\n", __func__,
+ (eidledl & DEVID_MASK) >> DEVID_SHIFT);
+ return 0;
+ }
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME ": Silicon revision ID: 0x%02x\n",
+ (eidledl & REVID_MASK) >> REVID_SHIFT);
+
+
+ enc424j600_write_16b_sfr(priv, ETXSTL, TXSTART);
+ enc424j600_write_16b_sfr(priv, ERXSTL, RXSTART);
+
+ priv->next_pk_ptr = RXSTART;
+ enc424j600_write_16b_sfr(priv, ERXTAILL, SRAMSIZE - 2);
+ enc424j600_write_16b_sfr(priv, ERXFCONL, UCEN | BCEN | CRCEN | RUNTEN);
+
+ enc424j600_phy_write(priv, PHANA, PHANA_DEFAULT);
+
+ /* PHCON1 */
+ phcon1 = 0;
+ if (priv->autoneg) {
+ /* Enable autonegotiation and renegotiate */
+ phcon1 |= ANEN | RENEG;
+ } else {
+ if (priv->speed100)
+ phcon1 |= SPD100;
+ if (priv->full_duplex)
+ phcon1 |= PFULDPX;
+ }
+ enc424j600_phy_write(priv, PHCON1, phcon1);
+
+ /* MACON2
+ * defer transmission if collision occurs (only for half duplex)
+ * pad to 60 or 64 bytes and append CRC
+ * enable receiving huge frames (instead of limiting packet size) */
+ macon2 = MACON2_DEFER | PADCFG2 | PADCFG0 | TXCRCEN | HFRMEN;
+
+ /* If autonegotiation is enabled, we have to wait untill it finishes
+ * and set the PHYDPX bit in MACON2 correctly */
+ if (priv->autoneg) {
+ u8 estath;
+ enc424j600_wait_for_autoneg(priv);
+
+ /* read the PHYDPX bit in ESTAT and set FULDPX in
+ MACON2 accordingly */
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ if (estath & PHYDPX)
+ macon2 |= FULDPX;
+ } else if (priv->full_duplex)
+ macon2 |= FULDPX;
+
+ enc424j600_write_16b_sfr(priv, MACON2L, macon2);
+
+ /* MAIPGL
+ * Recomended values for inter packet gaps */
+ if (!priv->autoneg) {
+ enc424j600_write_16b_sfr(priv, MAIPGL,
+ MAIPGL_VAL | (MAIPGH_VAL << 8));
+ }
+
+ /*
+ * Select enabled interrupts, but don't set the global
+ * interrupt enable flag.
+ */
+
+ enc424j600_write_16b_sfr(priv, EIEL,
+ LINKIE << 8 | PKTIE | DMAIE | TXIE | TXABTIE |
+ RXABTIE);
+
+ enc424j600_read_16b_sfr(priv, ECON1L, &econ1l);
+ econ1l |= (RXEN);
+ enc424j600_write_16b_sfr(priv, ECON1L, econ1l);
+
+ mutex_unlock(&priv->lock);
+
+ if (netif_msg_hw(priv))
+ enc424j600_dump_regs(priv, "Hw initialized.");
+
+ return 1;
+}
+
+static void enc424j600_hw_enable(struct enc424j600_net *priv)
+{
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
+ __func__);
+
+ mutex_lock(&priv->lock);
+
+ /* Clear any pending interrupts */
+ enc424j600_write_16b_sfr(priv, EIRL, 0);
+
+ /* Enable global interrupt flag */
+ enc424j600_set_bits(priv, EIEH, INTIE);
+
+ /* enable receive logic */
+ enc424j600_set_bits(priv, ECON1L, RXEN);
+ priv->hw_enable = true;
+ mutex_unlock(&priv->lock);
+}
+
+static void enc424j600_hw_disable(struct enc424j600_net *priv)
+{
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() disabling interrupts.\n",
+ __func__);
+
+ mutex_lock(&priv->lock);
+
+ /* disable receive logic */
+ enc424j600_clear_bits(priv, ECON1L, RXEN);
+
+ /* Disable global interrupt flag */
+ enc424j600_clear_bits(priv, EIEH, INTIE);
+
+ priv->hw_enable = false;
+
+ mutex_unlock(&priv->lock);
+}
+
+static int
+enc424j600_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ int ret = 0;
+ if (!priv->hw_enable) {
+ /* link is in low power mode now; duplex setting
+ * will take effect on next enc424j600_hw_init().
+ */
+ if (speed == SPEED_10 || speed == SPEED_100) {
+ priv->autoneg = (autoneg == AUTONEG_ENABLE);
+ priv->full_duplex = (duplex == DUPLEX_FULL);
+ priv->speed100 = (speed == SPEED_100);
+ } else {
+ if (netif_msg_link(priv))
+ dev_warn(&ndev->dev,
+ "unsupported link setting\n");
+ ret = -EOPNOTSUPP;
+ }
+ } else {
+ if (netif_msg_link(priv))
+ dev_warn(&ndev->dev, "Warning: hw must be disabled "
+ "to set link mode\n");
+ ret = -EBUSY;
+ }
+ return ret;
+}
+
+/*
+ * TODO: clean this up
+ * Receive Status vector
+ */
+static void enc424j600_dump_rsv(struct enc424j600_net *priv, const char *msg,
+ u16 pk_ptr, int len, u16 sts)
+{
+ printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
+ msg, pk_ptr);
+ printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
+ RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
+ printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
+ " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
+ RSV_GETBIT(sts, RSV_CRCERROR),
+ RSV_GETBIT(sts, RSV_LENCHECKERR),
+ RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
+ printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
+ "LongDropEvent: %d, CarrierEvent: %d\n",
+ RSV_GETBIT(sts, RSV_RXMULTICAST),
+ RSV_GETBIT(sts, RSV_RXBROADCAST),
+ RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
+ RSV_GETBIT(sts, RSV_CARRIEREV));
+ printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
+ " UnknownOp: %d, VLanTagFrame: %d\n",
+ RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
+ RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
+ RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
+ RSV_GETBIT(sts, RSV_RXTYPEVLAN));
+}
+
+static void dump_packet(const char *msg, int len, const char *data)
+{
+
+ printk(KERN_ALERT ": %s - packet len:%d\n", msg, len);
+ print_hex_dump(KERN_ALERT, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
+ data, len, true);
+}
+
+/*
+ * Calculate wrap around when reading beyond the end of the RX buffer
+ */
+static u16 rx_packet_start(u16 ptr)
+{
+ if (ptr + RSV_SIZE > RXEND_INIT)
+ return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART + 1);
+ else
+ return ptr + RSV_SIZE;
+}
+
+/*
+ * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
+ */
+static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
+{
+ u16 erxrdpt;
+ if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
+ erxrdpt = end;
+ else
+ erxrdpt = next_packet_ptr - 1;
+
+ return erxrdpt;
+}
+
+static void nolock_rxfifo_init(struct enc424j600_net *priv, u16 start, u16 end)
+{
+ u16 erxrdpt;
+ if (start > 0x5FFF || end > 0x5FFF || start > end) {
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
+ "bad parameters!\n", __func__, start, end);
+ return;
+ }
+ /* set receive buffer start + end */
+ priv->next_pk_ptr = start;
+ enc424j600_write_16b_sfr(priv, ERXSTL, start);
+ erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
+ enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
+ enc424j600_write_16b_sfr(priv, ERXTAILL, end);
+}
+
+/*
+ * Hardware receive function.
+ * Read the buffer memory, update the FIFO pointer to free the buffer,
+ * check the status vector and decrement the packet counter.
+ */
+static void enc424j600_hw_rx(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ struct sk_buff *skb = NULL;
+ u16 erxrdpt, next_packet, rxstat;
+ u8 pkcnt;
+ u16 head, tail;
+ u8 rsv[RSV_SIZE];
+ u16 newrxtail;
+ int len;
+
+ if (netif_msg_rx_status(priv))
+ printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
+ priv->next_pk_ptr);
+ if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev,
+ "%s() Invalid packet address!! 0x%04x\n",
+ __func__, priv->next_pk_ptr);
+ mutex_lock(&priv->lock);
+ enc424j600_clear_bits(priv, ECON1L, RXEN);
+ enc424j600_set_bits(priv, ECON2L, RXRST);
+ enc424j600_clear_bits(priv, ECON2L, RXRST);
+ nolock_rxfifo_init(priv, RXSTART, RXEND_INIT);
+ enc424j600_clear_bits(priv, EIRL, RXABTIF);
+ enc424j600_set_bits(priv, ECON1L, RXEN);
+ mutex_unlock(&priv->lock);
+ ndev->stats.rx_errors++;
+ return;
+ }
+
+ /* Read next packet pointer and rx status vector */
+ enc424j600_read_sram(priv, rsv, sizeof(rsv), priv->next_pk_ptr, 1);
+
+ next_packet = rsv[1];
+ next_packet <<= 8;
+ next_packet |= rsv[0];
+
+ len = rsv[3];
+ len <<= 8;
+ len |= rsv[2];
+
+ rxstat = rsv[5];
+ rxstat <<= 8;
+ rxstat |= rsv[4];
+
+ if (netif_msg_rx_status(priv))
+ enc424j600_dump_rsv(priv, __func__, next_packet, len, rxstat);
+
+ if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
+ ndev->stats.rx_errors++;
+ if (RSV_GETBIT(rxstat, RSV_CRCERROR))
+ ndev->stats.rx_crc_errors++;
+ if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
+ ndev->stats.rx_frame_errors++;
+ if (len > MAX_FRAMELEN)
+ ndev->stats.rx_over_errors++;
+ } else {
+ skb = dev_alloc_skb(len + NET_IP_ALIGN);
+ if (!skb) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev,
+ "out of memory for Rx'd frame\n");
+ ndev->stats.rx_dropped++;
+ } else {
+ skb->dev = ndev;
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ /* copy the packet from the receive buffer */
+ enc424j600_read_sram(priv, skb_put(skb, len), len,
+ rx_packet_start(priv->next_pk_ptr),
+ 1);
+
+ if (netif_msg_pktdata(priv))
+ dump_packet(__func__, skb->len, skb->data);
+ skb->protocol = eth_type_trans(skb, ndev);
+ /* update statistics */
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += len;
+ netif_rx_ni(skb);
+ }
+ }
+ newrxtail = next_packet - 2;
+ if (next_packet == RXSTART)
+ newrxtail = SRAMSIZE - 2;
+
+ enc424j600_write_16b_sfr(priv, ERXTAILL, newrxtail);
+ /*
+ * Move the RX read pointer to the start of the next
+ * received packet.
+ * This frees the memory we just read out
+ */
+ erxrdpt = erxrdpt_workaround(next_packet, RXSTART, RXEND_INIT);
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n", __func__,
+ erxrdpt);
+
+ mutex_lock(&priv->lock);
+ enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
+
+#ifdef CONFIG_ENC28J60_WRITEVERIFY
+ if (netif_msg_drv(priv)) {
+ u16 reg;
+
+ enc424j600_read_16b_sfr(priv, ERXRDPTL, ®);
+ if (reg != erxrdpt)
+ printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
+ "error (0x%04x - 0x%04x)\n", __func__, reg,
+ erxrdpt);
+ }
+#endif
+
+ priv->next_pk_ptr = next_packet;
+ enc424j600_read_8b_sfr(priv, ESTATL, &pkcnt);
+ enc424j600_read_16b_sfr(priv, ERXHEADL, &head);
+ enc424j600_read_16b_sfr(priv, ERXTAILL, &tail);
+ /* we are done with this packet, decrement the packet counter */
+ enc424j600_set_bits(priv, ECON1H, PKTDEC);
+
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * Access the PHY to determine link status
+ */
+static void enc424j600_check_link_status(struct enc424j600_net *priv)
+{
+ u8 estath;
+ u16 macon2;
+
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ if (estath & PHYLNK) {
+ if (priv->autoneg) {
+ enc424j600_wait_for_autoneg(priv);
+ if (estath & PHYDPX) {
+ printk(KERN_ALERT "Full Duplex");
+ enc424j600_read_16b_sfr(priv, MACON2L, &macon2);
+ macon2 |= FULDPX;
+ enc424j600_write_16b_sfr(priv, MACON2L, macon2);
+ }
+ }
+ netif_carrier_on(priv->netdev);
+ if (netif_msg_ifup(priv))
+ dev_info(&(priv->netdev->dev), "link up\n");
+ } else {
+ if (netif_msg_ifdown(priv))
+ dev_info(&(priv->netdev->dev), "link down\n");
+ netif_carrier_off(priv->netdev);
+ }
+}
+
+static void enc424j600_tx_clear(struct enc424j600_net *priv, bool err)
+{
+ struct net_device *ndev = priv->netdev;
+ if (err)
+ ndev->stats.tx_errors++;
+ else
+ ndev->stats.tx_packets++;
+
+ if (priv->tx_skb) {
+ if (!err)
+ ndev->stats.tx_bytes += priv->tx_skb->len;
+ dev_kfree_skb(priv->tx_skb);
+ priv->tx_skb = NULL;
+ }
+
+ netif_wake_queue(ndev);
+}
+
+static int enc424j600_int_rx_abbort_handler(struct enc424j600_net *priv,
+ int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intRXAbt(%d)\n", loop);
+ mutex_lock(&priv->lock);
+ priv->netdev->stats.rx_dropped++;
+ enc424j600_clear_bits(priv, EIRL, RXABTIF);
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_link_handler(struct enc424j600_net *priv, int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intLINK(%d)\n", loop);
+
+ /* we check more than is necessary here --
+ * only PHYLNK would be needed. */
+ enc424j600_check_link_status(priv);
+
+ return loop;
+}
+
+static int enc424j600_int_tx_handler(struct enc424j600_net *priv, int loop)
+{
+ loop++;
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intTX(%d)\n", loop);
+
+ mutex_lock(&priv->lock);
+ enc424j600_tx_clear(priv, false);
+ enc424j600_clear_bits(priv, EIRL, TXIF);
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_tx_err_handler(struct enc424j600_net *priv, int loop)
+{
+ u8 etxstat;
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intTXErr(%d)\n", loop);
+
+ mutex_lock(&priv->lock);
+
+ enc424j600_read_8b_sfr(priv, ETXSTATH, &etxstat);
+
+ if (etxstat & LATECOL) {
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": Late collision TXErr (%d)\n",
+ priv->tx_retry_count);
+ if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
+ enc424j600_set_bits(priv, ECON1L, TXRTS);
+ else
+ enc424j600_tx_clear(priv, true);
+ } else if (etxstat & MAXCOL) {
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG DRV_NAME ": Max collisions TXErr\n");
+ enc424j600_tx_clear(priv, true);
+ } else {
+ enc424j600_tx_clear(priv, true);
+ }
+
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_received_packet_handler(struct enc424j600_net *priv)
+{
+ uint8_t pk_counter;
+ int ret;
+
+ enc424j600_read_8b_sfr(priv, ESTATL, &pk_counter);
+ if (pk_counter && netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
+ if (pk_counter > priv->max_pk_counter) {
+ /* update statistics */
+ priv->max_pk_counter = pk_counter;
+ if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
+ printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
+ priv->max_pk_counter);
+ }
+ ret = pk_counter;
+ while (pk_counter-- > 0)
+ enc424j600_hw_rx(priv->netdev);
+ return ret;
+}
+
+static void enc424j600_irq_work_handler(struct work_struct *work)
+{
+
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, irq_work);
+ int loop;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ /* disable further interrupts */
+ enc424j600_clear_bits(priv, EIEH, INTIE);
+
+ do {
+ u16 intflags;
+ enc424j600_read_16b_sfr(priv, EIRL, &intflags);
+ loop = 0;
+
+ /* LINK changed handler */
+ if ((intflags & LINKIF) != 0)
+ loop = enc424j600_int_link_handler(priv, loop);
+
+ /* TX complete handler */
+ if ((intflags & TXIF) != 0)
+ loop = enc424j600_int_tx_handler(priv, loop);
+
+ /* TX Error handler */
+ if ((intflags & TXABTIF) != 0) {
+ printk(KERN_ALERT "ABORTING TRANSMITTING PACKET");
+ loop = enc424j600_int_tx_err_handler(priv, loop);
+ }
+ /* RX Error handler */
+ if ((intflags & RXABTIF) != 0) {
+ printk(KERN_ALERT "ABORTING RECEIVED PACKET");
+ loop = enc424j600_int_rx_abbort_handler(priv, loop);
+ }
+ /* RX handler */
+ if ((intflags & PKTIF) != 0)
+ loop = enc424j600_int_received_packet_handler(priv);
+ enc424j600_clear_bits(priv, EIRL, intflags && 0xff);
+ enc424j600_clear_bits(priv, EIRH, intflags >> 8);
+ } while (loop);
+ /* re-enable interrupts */
+ enc424j600_set_bits(priv, EIEH, INTIE);
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
+}
+
+void locked_reg_bfset(struct enc424j600_net *priv, u8 addr, u8 mask)
+{
+ mutex_lock(&priv->lock);
+ enc424j600_set_bits(priv, addr, mask);
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * Hardware transmit function.
+ * Fill the buffer memory and send the contents of the transmit buffer
+ * onto the network
+ */
+static void enc424j600_hw_tx(struct enc424j600_net *priv)
+{
+ if (!priv->tx_skb) {
+ enc424j600_tx_clear(priv, false);
+ return;
+ }
+
+ if (netif_msg_tx_queued(priv))
+ printk(KERN_DEBUG DRV_NAME ": Tx Packet Len:%d\n",
+ priv->tx_skb->len);
+
+ if (netif_msg_pktdata(priv))
+ dump_packet(__func__, priv->tx_skb->len, priv->tx_skb->data);
+
+ enc424j600_write_sram(priv, priv->tx_skb->data, priv->tx_skb->len,
+ TXSTART, 3);
+
+ /* Set the tx pointer to start of general purpose SRAM area */
+ enc424j600_write_16b_sfr(priv, ETXSTL, TXSTART);
+
+ /* Write the transfer length */
+ enc424j600_write_16b_sfr(priv, ETXLENL, priv->tx_skb->len);
+#ifdef CONFIG_ENC28J60_WRITEVERIFY
+ /* readback and verify written data */
+ if (netif_msg_drv(priv)) {
+ int test_len, k;
+ /* limit the test to the first 64 bytes */
+ u8 test_buf[64];
+ int okflag;
+
+ test_len = priv->tx_skb->len;
+ if (test_len > sizeof(test_buf))
+ test_len = sizeof(test_buf);
+
+ /* + 1 to skip control byte */
+ enc28j60_mem_read(priv, TXSTART_INIT + 1, test_len, test_buf);
+ okflag = 1;
+ for (k = 0; k < test_len; k++) {
+ if (priv->tx_skb->data[k] != test_buf[k]) {
+ printk(KERN_DEBUG DRV_NAME
+ ": Error, %d location differ: "
+ "0x%02x-0x%02x\n", k,
+ priv->tx_skb->data[k], test_buf[k]);
+ okflag = 0;
+ }
+ }
+ if (!okflag)
+ printk(KERN_DEBUG DRV_NAME ": Tx write buffer, "
+ "verify ERROR!\n");
+ }
+#endif
+ /* set TX request flag */
+ locked_reg_bfset(priv, ECON1L, TXRTS);
+}
+
+static int enc424j600_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+ if (netif_msg_tx_queued(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ /* If some error occurs while trying to transmit this
+ * packet, you should return '1' from this function.
+ * In such a case you _may not_ do anything to the
+ * SKB, it is still owned by the network queueing
+ * layer when an error is returned. This means you
+ * may not modify any SKB fields, you may not free
+ * the SKB, etc.
+ */
+ netif_stop_queue(dev);
+
+ /* save the timestamp */
+ priv->netdev->trans_start = jiffies;
+ /* Remember the skb for deferred processing */
+ priv->tx_skb = skb;
+ schedule_work(&priv->tx_work);
+
+ return NETDEV_TX_OK;
+}
+
+static void enc424j600_tx_work_handler(struct work_struct *work)
+{
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, tx_work);
+
+ /* actual delivery of data */
+ enc424j600_hw_tx(priv);
+}
+
+static irqreturn_t enc424j600_irq(int irq, void *dev_id)
+{
+ struct enc424j600_net *priv = dev_id;
+ /*
+ * Can't do anything in interrupt context because we need to
+ * block (spi_sync() is blocking) so fire of the interrupt
+ * handling workqueue.
+ * Remember that we access enc424j600 registers through SPI bus
+ * via spi_sync() call.
+ */
+ schedule_work(&priv->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void enc424j600_tx_timeout(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+
+ if (netif_msg_timer(priv))
+ dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
+
+ ndev->stats.tx_errors++;
+ /* can't restart safely under softirq */
+ schedule_work(&priv->restart_work);
+}
+
+/*
+ * Open/initialize the board. This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+static int enc424j600_net_open(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ if (netif_msg_ifup(priv))
+ dev_err(&dev->dev, "invalid MAC address %pM\n",
+ dev->dev_addr);
+ return -EADDRNOTAVAIL;
+ }
+ /* Reset the hardware here (and take it out of low power mode) */
+ enc424j600_lowpower(priv, false);
+ enc424j600_hw_disable(priv);
+ if (!enc424j600_hw_init(priv)) {
+ if (netif_msg_ifup(priv))
+ dev_err(&dev->dev, "hw_reset() failed\n");
+ return -EINVAL;
+ }
+ /* Update the MAC address (in case user has changed it) */
+ enc424j600_set_hw_macaddr(dev);
+ /* Enable interrupts */
+ enc424j600_hw_enable(priv);
+ /* check link status */
+ enc424j600_check_link_status(priv);
+ /* We are now ready to accept transmit requests from
+ * the queueing layer of the networking.
+ */
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/* The inverse routine to net_open(). */
+static int enc424j600_net_close(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ enc424j600_hw_disable(priv);
+ enc424j600_lowpower(priv, true);
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+/*
+ * Set or clear the multicast filter for this adapter
+ * num_addrs == -1 Promiscuous mode, receive all packets
+ * num_addrs == 0 Normal mode, filter out multicast packets
+ * num_addrs > 0 Multicast mode, receive normal and MC packets
+ */
+static void enc424j600_set_multicast_list(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+ int oldfilter = priv->rxfilter;
+
+ if (dev->flags & IFF_PROMISC) {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "promiscuous mode\n");
+ priv->rxfilter = RXFILTER_PROMISC;
+ } else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "%smulticast mode\n",
+ (dev->flags & IFF_ALLMULTI) ? "all-" : "");
+ priv->rxfilter = RXFILTER_MULTI;
+ } else {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "normal mode\n");
+ priv->rxfilter = RXFILTER_NORMAL;
+ }
+
+ if (oldfilter != priv->rxfilter)
+ schedule_work(&priv->setrx_work);
+}
+
+void locked_regb_write(struct enc424j600_net *priv, u8 address, u8 data)
+{
+ mutex_lock(&priv->lock);
+ enc424j600_write_8b_sfr(priv, address, data);
+ mutex_unlock(&priv->lock);
+}
+
+static void enc424j600_setrx_work_handler(struct work_struct *work)
+{
+ u16 macon1;
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, setrx_work);
+
+ if (priv->rxfilter == RXFILTER_PROMISC) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
+ enc424j600_read_16b_sfr(priv, MACON1L, &macon1);
+ macon1 = macon1 | PASSALL;
+ enc424j600_write_16b_sfr(priv, MACON1L, macon1);
+ locked_regb_write(priv, ERXFCONL, UCEN | MCEN | NOTMEEN);
+ } else if (priv->rxfilter == RXFILTER_MULTI) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
+ locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN | MCEN);
+
+ } else {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": normal mode\n");
+ locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN);
+
+ }
+}
+
+static void enc424j600_restart_work_handler(struct work_struct *work)
+{
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, restart_work);
+ struct net_device *ndev = priv->netdev;
+ int ret;
+
+ rtnl_lock();
+ if (netif_running(ndev)) {
+ enc424j600_net_close(ndev);
+ ret = enc424j600_net_open(ndev);
+ if (unlikely(ret)) {
+ dev_info(&ndev->dev, " could not restart %d\n", ret);
+ dev_close(ndev);
+ }
+ }
+ rtnl_unlock();
+}
+
+/* ......................... ETHTOOL SUPPORT ........................... */
+
+static void
+enc424j600_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+ strlcpy(info->bus_info,
+ dev_name(dev->dev.parent), sizeof(info->bus_info));
+}
+
+static int
+enc424j600_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->supported = SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_TP;
+
+ cmd->speed = priv->speed100 ? SPEED_100 : SPEED_10;
+ cmd->duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
+ cmd->port = PORT_TP;
+ cmd->autoneg = priv->autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+ return 0;
+}
+
+static int
+enc424j600_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ return enc424j600_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
+}
+
+static u32 enc424j600_get_msglevel(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ return priv->msg_enable;
+}
+
+static void enc424j600_set_msglevel(struct net_device *dev, u32 val)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ priv->msg_enable = val;
+}
+
+static const struct ethtool_ops enc424j600_ethtool_ops = {
+ .get_settings = enc424j600_get_settings,
+ .set_settings = enc424j600_set_settings,
+ .get_drvinfo = enc424j600_get_drvinfo,
+ .get_msglevel = enc424j600_get_msglevel,
+ .set_msglevel = enc424j600_set_msglevel,
+};
+
+static int enc424j600_chipset_init(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ enc424j600_get_hw_macaddr(dev);
+ return enc424j600_hw_init(priv);
+
+}
+
+static const struct net_device_ops enc424j600_netdev_ops = {
+ .ndo_open = enc424j600_net_open,
+ .ndo_stop = enc424j600_net_close,
+ .ndo_start_xmit = enc424j600_send_packet,
+ .ndo_set_multicast_list = enc424j600_set_multicast_list,
+ .ndo_set_mac_address = enc424j600_set_mac_address,
+ .ndo_tx_timeout = enc424j600_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int __devinit enc424j600_probe(struct spi_device *spi)
+{
+ struct net_device *dev;
+ struct enc424j600_net *priv;
+ int ret = 0;
+
+ if (netif_msg_drv(&debug))
+ dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
+ DRV_VERSION);
+
+ dev = alloc_etherdev(sizeof(struct enc424j600_net));
+ if (!dev) {
+ if (netif_msg_drv(&debug))
+ dev_err(&spi->dev, DRV_NAME
+ ": unable to alloc new ethernet\n");
+ ret = -ENOMEM;
+ goto error_alloc;
+ }
+ priv = netdev_priv(dev);
+
+ priv->netdev = dev; /* priv to netdev reference */
+ priv->spi = spi; /* priv to spi reference */
+ priv->msg_enable = netif_msg_init(debug.msg_enable,
+ ENC424J600_MSG_DEFAULT);
+ mutex_init(&priv->lock);
+ INIT_WORK(&priv->tx_work, enc424j600_tx_work_handler);
+ INIT_WORK(&priv->setrx_work, enc424j600_setrx_work_handler);
+ INIT_WORK(&priv->irq_work, enc424j600_irq_work_handler);
+ INIT_WORK(&priv->restart_work, enc424j600_restart_work_handler);
+ dev_set_drvdata(&spi->dev, priv); /* spi to priv reference */
+ SET_NETDEV_DEV(dev, &spi->dev);
+
+ /* If requested, allocate DMA buffers */
+ if (enc424j600_enable_dma) {
+ spi->dev.coherent_dma_mask = ~0;
+
+ /*
+ * Minimum coherent DMA allocation is PAGE_SIZE, so allocate
+ * that much and share it between Tx and Rx DMA buffers.
+ */
+#if SPI_TRANSFER_BUF_LEN > PAGE_SIZE / 2
+#error "A problem in DMA buffer allocation"
+#endif
+ priv->spi_tx_buf = dma_alloc_coherent(&spi->dev,
+ PAGE_SIZE,
+ &priv->spi_tx_dma,
+ GFP_DMA);
+
+ if (priv->spi_tx_buf) {
+ priv->spi_rx_buf = (u8 *) (priv->spi_tx_buf +
+ (PAGE_SIZE / 2));
+ priv->spi_rx_dma = (dma_addr_t) (priv->spi_tx_dma +
+ (PAGE_SIZE / 2));
+ } else {
+ /* Fall back to non-DMA */
+ enc424j600_enable_dma = 0;
+ }
+ }
+
+ /* Allocate non-DMA buffers */
+ if (!enc424j600_enable_dma) {
+ priv->spi_tx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_tx_buf) {
+ ret = -ENOMEM;
+ goto error_tx_buf;
+ }
+ priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_rx_buf) {
+ ret = -ENOMEM;
+ goto error_rx_buf;
+ }
+ }
+
+ if (!enc424j600_chipset_init(dev)) {
+ if (netif_msg_probe(priv))
+ dev_info(&spi->dev, DRV_NAME " chip not found\n");
+ ret = -EIO;
+ goto error_irq;
+ }
+
+ /* Board setup must set the relevant edge trigger type;
+ * level triggers won't currently work.
+ */
+ ret = request_irq(spi->irq, enc424j600_irq, 0, DRV_NAME, priv);
+ if (ret < 0) {
+ if (netif_msg_probe(priv))
+ dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
+ "(ret = %d)\n", spi->irq, ret);
+ goto error_irq;
+ }
+
+ dev->if_port = IF_PORT_10BASET; /* TODO: ?? */
+ dev->irq = spi->irq;
+ dev->netdev_ops = &enc424j600_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ SET_ETHTOOL_OPS(dev, &enc424j600_ethtool_ops);
+
+ enc424j600_lowpower(priv, true);
+
+ ret = register_netdev(dev);
+ if (ret) {
+ if (netif_msg_probe(priv))
+ dev_err(&spi->dev, "register netdev " DRV_NAME
+ " failed (ret = %d)\n", ret);
+ goto error_register;
+ }
+ dev_info(&dev->dev, DRV_NAME " driver registered\n");
+
+ return 0;
+
+error_register:
+ free_irq(spi->irq, priv);
+error_irq:
+ free_netdev(dev);
+ if (!enc424j600_enable_dma)
+ kfree(priv->spi_rx_buf);
+error_rx_buf:
+ if (!enc424j600_enable_dma)
+ kfree(priv->spi_tx_buf);
+error_tx_buf:
+ if (enc424j600_enable_dma)
+ dma_free_coherent(&spi->dev, PAGE_SIZE,
+ priv->spi_tx_buf, priv->spi_tx_dma);
+error_alloc:
+ return ret;
+}
+
+static int __devexit enc424j600_remove(struct spi_device *spi)
+{
+ struct enc424j600_net *priv = dev_get_drvdata(&spi->dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": remove\n");
+
+ unregister_netdev(priv->netdev);
+ free_irq(spi->irq, priv);
+ free_netdev(priv->netdev);
+
+ return 0;
+}
+
+static struct spi_driver enc424j600_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = enc424j600_probe,
+ .remove = __devexit_p(enc424j600_remove),
+};
+
+static int __init enc424j600_init(void)
+{
+ msec20_to_jiffies = msecs_to_jiffies(20);
+
+ return spi_register_driver(&enc424j600_driver);
+}
+
+module_init(enc424j600_init);
+
+static void __exit enc424j600_exit(void)
+{
+ spi_unregister_driver(&enc424j600_driver);
+}
+
+module_exit(enc424j600_exit);
+
+MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
+MODULE_AUTHOR("Balaji Venkatachalam <balaji.v@thotakaa.com>");
+MODULE_LICENSE("GPL");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");
+module_param(enc424j600_enable_dma, int, S_IRUGO);
+MODULE_PARM_DESC(enc424j600_enable_dma, "Enable SPI DMA. Default: 0 (Off)");
+MODULE_ALIAS("spi:" DRV_NAME);
diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600_hw.h
b/drivers/net/enc424j600_hw.h
--- a/drivers/net/enc424j600_hw.h 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/enc424j600_hw.h 2011-01-05 23:51:24.000000000 +0530
@@ -0,0 +1,460 @@
+/*
+* enc424j600_hw.h: Register definitions
+*
+*/
+
+#ifndef _ENC424J600_HW_H
+#define _ENC424J600_HW_H
+
+/*
+* ENC424J600 Control Registers
+* Control register definitions are a combination of address
+* and bank number
+* - Register address (bits 0-4)
+* - Bank number (bits 5-6)
+*/
+#define ADDR_MASK 0x1F
+#define BANK_MASK 0x60
+#define BANK_SHIFT 5
+
+/* All-bank registers */
+#define EUDASTL 0x16
+#define EUDASTH 0x17
+#define EUDANDL 0x18
+#define EUDANDH 0x19
+#define ESTATL 0x1A
+#define ESTATH 0x1B
+#define EIRL 0x1C
+#define EIRH 0x1D
+#define ECON1L 0x1E
+#define ECON1H 0x1F
+
+/* Bank 0 registers */
+#define ETXSTL (0x00 | 0x00)
+#define ETXSTH (0x01 | 0x00)
+#define ETXLENL (0x02 | 0x00)
+#define ETXLENH (0x03 | 0x00)
+#define ERXSTL (0x04 | 0x00)
+#define ERXSTH (0x05 | 0x00)
+#define ERXTAILL (0x06 | 0x00)
+#define ERXTAILH (0x07 | 0x00)
+#define ERXHEADL (0x08 | 0x00)
+#define ERXHEADH (0x09 | 0x00)
+#define EDMASTL (0x0A | 0x00)
+#define EDMASTH (0x0B | 0x00)
+#define EDMALENL (0x0C | 0x00)
+#define EDMALENH (0x0D | 0x00)
+#define EDMADSTL (0x0E | 0x00)
+#define EDMADSTH (0x0F | 0x00)
+#define EDMACSL (0x10 | 0x00)
+#define EDMACSH (0x11 | 0x00)
+#define ETXSTATL (0x12 | 0x00)
+#define ETXSTATH (0x13 | 0x00)
+#define ETXWIREL (0x14 | 0x00)
+#define ETXWIREH (0x15 | 0x00)
+
+/* Bank 1 registers */
+#define EHT1L (0x00 | 0x20)
+#define EHT1H (0x01 | 0x20)
+#define EHT2L (0x02 | 0x20)
+#define EHT2H (0x03 | 0x20)
+#define EHT3L (0x04 | 0x20)
+#define EHT3H (0x05 | 0x20)
+#define EHT4L (0x06 | 0x20)
+#define EHT4H (0x07 | 0x20)
+#define EPMM1L (0x08 | 0x20)
+#define EPMM1H (0x09 | 0x20)
+#define EPMM2L (0x0A | 0x20)
+#define EPMM2H (0x0B | 0x20)
+#define EPMM3L (0x0C | 0x20)
+#define EPMM3H (0x0D | 0x20)
+#define EPMM4L (0x0E | 0x20)
+#define EPMM4H (0x0F | 0x20)
+#define EPMCSL (0x10 | 0x20)
+#define EPMCSH (0x11 | 0x20)
+#define EPMOL (0x12 | 0x20)
+#define EPMOH (0x13 | 0x20)
+#define ERXFCONL (0x14 | 0x20)
+#define ERXFCONH (0x15 | 0x20)
+
+/* Bank 2 registers */
+#define MACON1L (0x00 | 0x40)
+#define MACON1H (0x01 | 0x40)
+#define MACON2L (0x02 | 0x40)
+#define MACON2H (0x03 | 0x40)
+#define MABBIPGL (0x04 | 0x40)
+#define MABBIPGH (0x05 | 0x40)
+#define MAIPGL (0x06 | 0x40)
+#define MAIPGH (0x07 | 0x40)
+#define MACLCONL (0x08 | 0x40)
+#define MACLCONH (0x09 | 0x40)
+#define MAMXFLL (0x0A | 0x40)
+#define MAMXFLH (0x0B | 0x40)
+#define MICMDL (0x12 | 0x40)
+#define MICMDH (0x13 | 0x40)
+#define MIREGADRL (0x14 | 0x40)
+#define MIREGADRH (0x15 | 0x40)
+
+/* Bank 3 registers */
+#define MAADR3L (0x00 | 0x60)
+#define MAADR3H (0x01 | 0x60)
+#define MAADR2L (0x02 | 0x60)
+#define MAADR2H (0x03 | 0x60)
+#define MAADR1L (0x04 | 0x60)
+#define MAADR1H (0x05 | 0x60)
+#define MIWRL (0x06 | 0x60)
+#define MIWRH (0x07 | 0x60)
+#define MIRDL (0x08 | 0x60)
+#define MIRDH (0x09 | 0x60)
+#define MISTATL (0x0A | 0x60)
+#define MISTATH (0x0B | 0x60)
+#define EPAUSL (0x0C | 0x60)
+#define EPAUSH (0x0D | 0x60)
+#define ECON2L (0x0E | 0x60)
+#define ECON2H (0x0F | 0x60)
+#define ERXWML (0x10 | 0x60)
+#define ERXWMH (0x11 | 0x60)
+#define EIEL (0x12 | 0x60)
+#define EIEH (0x13 | 0x60)
+#define EIDLEDL (0x14 | 0x60)
+#define EIDLEDH (0x15 | 0x60)
+
+/* Unbanked registers */
+#define EGPDATA (0x00 | 0x80)
+#define ERXDATA (0x02 | 0x80)
+#define EUDADATA (0x04 | 0x80)
+#define EGPRDPTL (0x06 | 0x80)
+#define EGPRDPTH (0x07 | 0x80)
+#define EGPWRPTL (0x08 | 0x80)
+#define EGPWRPTH (0x09 | 0x80)
+#define ERXRDPTL (0x0A | 0x80)
+#define ERXRDPTH (0x0B | 0x80)
+#define ERXWRPTL (0x0C | 0x80)
+#define ERXWRPTH (0x0D | 0x80)
+#define EUDARDPTL (0x0E | 0x80)
+#define EUDARDPTH (0x0F | 0x80)
+#define EUDAWRPTL (0x10 | 0x80)
+#define EUDAWRPTH (0x11 | 0x80)
+
+/* PHY registers */
+#define PHCON1 0x00
+#define PHSTAT1 0x01
+#define PHANA 0x04
+#define PHANLPA 0x05
+#define PHANE 0x06
+#define PHCON2 0x11
+#define PHSTAT2 0x1B
+#define PHSTAT3 0x1F
+
+/* Single-byte instructions */
+#define BXSEL(bank) (0xC0 + (bank & (BANK_MASK >> BANK_SHIFT)) * 2)
+/* Bank X Select */
+#define B0SEL 0xC0 /* Bank 0 Select */
+#define B1SEL 0xC2 /* Bank 1 Select */
+#define B2SEL 0xC4 /* Bank 2 Select */
+#define B3SEL 0xC6 /* Bank 3 Select */
+#define SETETHRST 0xCA /* System Reset */
+#define FCDISABLE 0xE0 /* Flow Control Disable */
+#define FCSINGLE 0xE2 /* Flow Control Single */
+#define FCMULTIPLE 0xE4 /* Flow Control Multiple */
+#define FCCLEAR 0xE6 /* Flow Control Clear */
+#define SETPKTDEC 0xCC /* Decrement Packet Counter */
+#define DMASTOP 0xD2 /* DMA Stop */
+#define DMACKSUM 0xD8 /* DMA Start Checksum */
+#define DMACKSUMS 0xDA /* DMA Start Checksum with Seed */
+#define DMACOPY 0xDC /* DMA Start Copy */
+#define DMACOPYS 0xDE /* DMA Start Copy and Checksum with Seed */
+#define SETTXRTS 0xD4 /* Request Packet Transmission */
+#define ENABLERX 0xE8 /* Enable RX */
+#define DISABLERX 0xEA /* Disable RX */
+#define SETEIE 0xEC /* Enable Interrupts */
+#define CLREIE 0xEE /* Disable Interrupts */
+
+/* Two byte instructions */
+#define RBSEL 0xC8 /* Read Bank Select */
+
+/* Three byte instructions */
+#define WGPRDPT 0x60 /* Write EGPRDPT */
+#define RGPRDPT 0x62 /* Read EGPRDPT */
+#define WRXRDPT 0x64 /* Write ERXRDPT */
+#define RRXRDPT 0x66 /* Read ERXRDPT */
+#define WUDARDPT 0x68 /* Write EUDARDPT */
+#define RUDARDPT 0x6A /* Read EUDARDPT */
+#define WGPWRPT 0x6C /* Write EGPWRPT */
+#define RGPWRPT 0x6E /* Read EGPWRPT */
+#define WRXWRPT 0x70 /* Write ERXWRPT */
+#define RRXWRPT 0x72 /* Read ERXWRPT */
+#define WUDAWRPT 0x74 /* Write EUDAWRPT */
+#define RUDAWRPT 0x76 /* Read EUDAWRPT */
+
+/* n byte instructions */
+#define RCR(addr) (0x00 | (addr & ADDR_MASK)) /* Read Control Register */
+#define WCR(addr) (0x40 | (addr & ADDR_MASK)) /* Write Control Register */
+#define RCRU 0x20 /* Read Control Register Unbanked */
+#define WCRU 0x22 /* Write Control Register Unbanked */
+#define BFS(addr) (0x80 | (addr & ADDR_MASK)) /* Bit Field Set */
+#define BFC(addr) (0xA0 | (addr & ADDR_MASK)) /* Bit Field Clear */
+#define BFSU 0x24 /* Bit Field Set Unbanked */
+#define BFCU 0x26 /* Bit Field Clear Unbanked */
+#define RGPDATA 0x28 /* Read EGPDATA */
+#define WGPDATA 0x2A /* Write EGPDATA */
+#define RRXDATA 0x2C /* Read ERXDATA */
+#define WRXDATA 0x2E /* Write ERXDATA */
+#define RUDADATA 0x30 /* Read EUDADATA */
+#define WUDADATA 0x32 /* Write EUDADATA */
+
+/* Register bit definitions */
+/* ESTATH */
+#define INT (1 << 7)
+#define FCIDLE (1 << 6)
+#define RXBUSY (1 << 5)
+#define CLKRDY (1 << 4)
+#define PHYDPX (1 << 2)
+#define PHYLNK (1 << 0)
+
+/* EIRH */
+/*for ease of use lets access it as a word*/
+#define CRYPTEN (1 << 15)
+#define MODEXIF (1 << 14)
+#define HASHIF (1 << 13)
+#define AESIF (1 << 12)
+#define LINKIF (1 << 11)
+
+/* EIRL */
+#define PKTIF (1 << 6)
+#define DMAIF (1 << 5)
+#define TXIF (1 << 3)
+#define TXABTIF (1 << 2)
+#define RXABTIF (1 << 1)
+#define PCFULIF (1 << 0)
+
+/* ECON1H */
+#define MODEXST (1 << 7)
+#define HASHEN (1 << 6)
+#define HASHOP (1 << 5)
+#define HASHLST (1 << 4)
+#define AESST (1 << 3)
+#define AESOP1 (1 << 2)
+#define AESOP0 (1 << 1)
+#define PKTDEC (1 << 0)
+
+/* ECON1L */
+#define FCOP1 (1 << 7)
+#define FCOP0 (1 << 6)
+#define DMAST (1 << 5)
+#define DMACPY (1 << 4)
+#define DMACSSD (1 << 3)
+#define DMANOCS (1 << 2)
+#define TXRTS (1 << 1)
+#define RXEN (1 << 0)
+
+/* ETXSTATH */
+#define LATECOL (1 << 2)
+#define MAXCOL (1 << 1)
+#define EXDEFER (1 << 0)
+
+/* ETXSTATL */
+#define ETXSTATL_DEFER (1 << 7)
+#define CRCBAD (1 << 4)
+#define COLCNT_MASK 0xF
+
+/* ERXFCONH */
+#define HTEN (1 << 7)
+#define MPEN (1 << 6)
+#define NOTPM (1 << 4)
+#define PMEN3 (1 << 3)
+#define PMEN2 (1 << 2)
+#define PMEN1 (1 << 1)
+#define PMEN0 (1 << 0)
+
+/* ERXFCONL */
+#define CRCEEN (1 << 7)
+#define CRCEN (1 << 6)
+#define RUNTEEN (1 << 5)
+#define RUNTEN (1 << 4)
+#define UCEN (1 << 3)
+#define NOTMEEN (1 << 2)
+#define MCEN (1 << 1)
+#define BCEN (1 << 0)
+/*no bytewise access*/
+/* MACON1L */
+#define LOOPBK (1 << 4)
+#define RXPAUS (1 << 2)
+#define PASSALL (1 << 1)
+
+/* MACON2 */
+#define MACON2_DEFER (1 << 14)
+#define BPEN (1 << 13)
+#define NOBKOFF (1 << 12)
+#define PADCFG2 (1 << 7)
+#define PADCFG1 (1 << 6)
+#define PADCFG0 (1 << 5)
+#define TXCRCEN (1 << 4)
+#define PHDREN (1 << 3)
+#define HFRMEN (1 << 2)
+#define FULDPX (1 << 0)
+
+/* MAIPG */
+/* value of the high byte is given by the reserved bits,
+* value of the low byte is recomended setting of the
+* IPG parameter.
+*/
+#define MAIPGH_VAL 0x0C
+#define MAIPGL_VAL 0x12
+
+/* MIREGADRH */
+#define MIREGADRH_VAL 0x01
+
+/* MIREGADRL */
+#define PHREG_MASK 0x1F
+
+/* MICMDL */
+#define MIISCAN (1 << 1)
+#define MIIRD (1 << 0)
+
+/* MISTATL */
+#define NVALID (1 << 2)
+#define SCAN (1 << 1)
+#define BUSY (1 << 0)
+
+/* ECON2H */
+#define ETHEN (1 << 7)
+#define STRCH (1 << 6)
+#define TXMAC (1 << 5)
+#define SHA1MD5 (1 << 4)
+#define COCON3 (1 << 3)
+#define COCON2 (1 << 2)
+#define COCON1 (1 << 1)
+#define COCON0 (1 << 0)
+
+/* ECON2L */
+#define AUTOFC (1 << 7)
+#define TXRST (1 << 6)
+#define RXRST (1 << 5)
+#define ETHRST (1 << 4)
+#define MODLEN1 (1 << 3)
+#define MODLEN0 (1 << 2)
+#define AESLEN1 (1 << 1)
+#define AESLEN0 (1 << 0)
+
+/* EIEH */
+#define INTIE (1 << 7)
+#define MODEXIE (1 << 6)
+#define HASHIE (1 << 5)
+#define AESIE (1 << 4)
+#define LINKIE (1 << 3)
+
+/* EIEL */
+#define PKTIE (1 << 6)
+#define DMAIE (1 << 5)
+#define TXIE (1 << 3)
+#define TXABTIE (1 << 2)
+#define RXABTIE (1 << 1)
+#define PCFULIE (1 << 0)
+
+/* EIDLEDH */
+#define LACFG3 (1 << 7)
+#define LACFG2 (1 << 6)
+#define LACFG1 (1 << 5)
+#define LACFG0 (1 << 4)
+#define LBCFG3 (1 << 3)
+#define LBCFG2 (1 << 2)
+#define LBCFG1 (1 << 1)
+#define LBCFG0 (1 << 0)
+
+/* EIDLEDL */
+#define DEVID_SHIFT 5
+#define DEVID_MASK (0x7 << DEVID_SHIFT)
+#define REVID_SHIFT 0
+#define REVID_MASK (0x1F << REVID_SHIFT)
+
+/* PHANA */
+/* Default value for PHY initialization*/
+#define PHANA_DEFAULT 0x05E1
+
+/* PHCON1 */
+#define PRST (1 << 15)
+#define PLOOPBK (1 << 14)
+#define SPD100 (1 << 13)
+#define ANEN (1 << 12)
+#define PSLEEP (1 << 11)
+#define RENEG (1 << 9)
+#define PFULDPX (1 << 8)
+
+/* PHSTAT */
+#define FULL100 (1 << 14)
+#define HALF100 (1 << 13)
+#define FULL10 (1 << 12)
+#define HALF10 (1 << 11)
+#define ANDONE (1 << 5)
+#define LRFAULT (1 << 4)
+#define ANABLE (1 << 3)
+#define LLSTAT (1 << 2)
+#define EXTREGS (1 << 0)
+
+#define EUDAST_TEST_VAL 0x1234
+
+#define TSV_SIZE 7
+
+#define ENC424J600_DEV_ID 0x1
+
+/* Configuration */
+
+/* Led is on when the link is present and driven low
+* temporarily when packet is TX'd or RX'd */
+#define LED_A_SETTINGS 0xC
+
+/* Led is on if the link is in 100 Mbps mode */
+#define LED_B_SETTINGS 0x8
+
+/* maximum ethernet frame length
+* Currently not used as a limit anywhere
+* (we're using the "huge frame enable" feature of
+* enc424j600). */
+#define MAX_FRAMELEN 1518
+
+/* Size in bytes of the receive buffer in enc424j600.
+* Must be word aligned (even).
+*/
+#define RX_BUFFER_SIZE (15 * MAX_FRAMELEN)
+
+/* Start of the general purpose area in sram */
+#define SRAM_GP_START 0x0
+
+/* SRAM size */
+#define SRAM_SIZE 0x6000
+
+/* Start of the receive buffer */
+#define ERXST_VAL (SRAM_SIZE - RX_BUFFER_SIZE)
+
+#define RSV_RXLONGEVDROPEV 16
+#define RSV_CARRIEREV 18
+#define RSV_CRCERROR 20
+#define RSV_LENCHECKERR 21
+#define RSV_LENOUTOFRANGE 22
+#define RSV_RXOK 23
+#define RSV_RXMULTICAST 24
+#define RSV_RXBROADCAST 25
+#define RSV_DRIBBLENIBBLE 26
+#define RSV_RXCONTROLFRAME 27
+#define RSV_RXPAUSEFRAME 28
+#define RSV_RXUNKNOWNOPCODE 29
+#define RSV_RXTYPEVLAN 30
+
+#define RSV_RUNTFILTERMATCH 31
+#define RSV_NOTMEFILTERMATCH 32
+#define RSV_HASHFILTERMATCH 33
+#define RSV_MAGICPKTFILTERMATCH 34
+#define RSV_PTRNMTCHFILTERMATCH 35
+#define RSV_UNICASTFILTERMATCH 36
+
+#define RSV_SIZE 8
+#define RSV_BITMASK(x) (1 << ((x) - 16))
+#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0)
+
+/* Put RX buffer at 0 as suggested by the Errata datasheet */
+
+#define RXSTART_INIT ERXST_VAL
+#define RXEND_INIT 0x5FFF
+
+#endif
diff -uprN -X a/Documentation/dontdiff a/drivers/net/Kconfig
b/drivers/net/Kconfig
--- a/drivers/net/Kconfig 2010-07-05 22:41:43.000000000 +0530
+++ b/drivers/net/Kconfig 2011-01-05 23:51:59.000000000 +0530
@@ -973,6 +973,23 @@ config ENC28J60_WRITEVERIFY
Enable the verify after the buffer write useful for debugging purpose.
If unsure, say N.
+config ENC424J600
+ tristate "ENC424J600 support"
+ depends on EXPERIMENTAL && SPI && NET_ETHERNET
+ select CRC32
+ ---help---
+ Support for the Microchip EN424J600 ethernet chip.
+
+ To compile this driver as a module, choose M here. The module will be
+ called enc424j600.
+
+config ENC424J600_WRITEVERIFY
+ bool "Enable write verify"
+ depends on ENC424J600
+ ---help---
+ Enable the verify after the buffer write useful for debugging purpose.
+ If unsure, say N.
+
config ETHOC
tristate "OpenCores 10/100 Mbps Ethernet MAC support"
depends on NET_ETHERNET && HAS_IOMEM
diff -uprN -X a/Documentation/dontdiff a/drivers/net/Makefile
b/drivers/net/Makefile
--- a/drivers/net/Makefile 2010-07-05 22:41:43.000000000 +0530
+++ b/drivers/net/Makefile 2011-01-05 21:46:57.000000000 +0530
@@ -240,6 +240,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_d
pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
+obj-$(CONFIG_ENC424J600) += enc424j600.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
2011-01-06 6:43 [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus Balaji Venkatachalam
@ 2011-01-06 14:56 ` Michał Mirosław
2011-01-09 9:00 ` Balaji Venkatachalam
0 siblings, 1 reply; 14+ messages in thread
From: Michał Mirosław @ 2011-01-06 14:56 UTC (permalink / raw)
To: Balaji Venkatachalam
Cc: netdev, mohan, blue.cube, lanconelli.claudio, Sriram Subramanian
A quick look follows.
2011/1/6 Balaji Venkatachalam <balaji.v@thotakaa.com>:
> From: Balaji Venkatachalam <balaji.v@thotakaa.com>
>
> These patches add support for Microchip enc424j600 ethernet chip
> controlled via SPI.
>
> I tested it on my custom board with ARM9 (Freescale i.MX233) with
> Kernel 2.6.31.14.
> Any comments are welcome.
>
> Signed-off-by: Balaji Venkatachalam <balaji.v@thotakaa.com>
> ---
>
> diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600.c
> b/drivers/net/enc424j600.c
> --- a/drivers/net/enc424j600.c 1970-01-01 05:30:00.000000000 +0530
> +++ b/drivers/net/enc424j600.c 2011-01-06 09:39:17.000000000 +0530
> @@ -0,0 +1,1694 @@
[...]
> +static int enc424j600_spi_trans(struct enc424j600_net *priv, int len)
> +{
> + /*modified to suit half duplexed spi */
> + struct spi_transfer tt = {
> + .tx_buf = priv->spi_tx_buf,
> + .len = SPI_OPLEN,
> + };
> + struct spi_transfer tr = {
> + .rx_buf = priv->spi_rx_buf,
> + .len = len,
> + };
> + struct spi_message m;
> + int ret;
> +
> + spi_message_init(&m);
> +
> + spi_message_add_tail(&tt, &m);
> + spi_message_add_tail(&tr, &m);
> +
> + ret = spi_sync(priv->spi, &m);
> +
> + if (ret == 0)
> + memcpy(priv->spi_rx_buf, tr.rx_buf, len);
> +
> + if (ret)
> + dev_err(&priv->spi->dev,
> + "spi transfer failed: ret = %d\n", ret);
> + return ret;
> +}
> +
> +/*
> + * Read data from chip SRAM.
> + * window = 0 for Receive Buffer
> + * = 1 for User Defined area
> + * = 2 for General Purpose area
> + */
This could use an enum. And the comment does not match the code, BTW.
> +static int enc424j600_read_sram(struct enc424j600_net *priv,
> + u8 *dst, int len, u16 srcaddr, int window)
> +{
> + int ret;
> +
> + if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
> + return -EINVAL;
> +
> + /* First set the write pointer as per selected window */
> + if (window == 1)
> + priv->spi_tx_buf[0] = WRXRDPT;
> + else if (window == 2)
> + priv->spi_tx_buf[0] = WUDARDPT;
> + else if (window == 3)
> + priv->spi_tx_buf[0] = WGPRDPT;
> +
> + priv->spi_tx_buf[1] = srcaddr & 0xFF;
> + priv->spi_tx_buf[2] = srcaddr >> 8;
> + ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
> +
> + /* Transfer the data */
> + if (window == 1)
> + priv->spi_tx_buf[0] = RRXDATA;
> + else if (window == 2)
> + priv->spi_tx_buf[0] = RUDADATA;
> + else if (window == 3)
> + priv->spi_tx_buf[0] = RGPDATA;
> +
> + ret = enc424j600_spi_trans(priv, len + 1); /*READ*/
> +
> + /* Copy the data to the tx buffer */
> + memcpy(dst, &priv->spi_rx_buf[0], len);
You could avoid the copy if enc424j600_spi_trans() would get the
buffer as its arguments.
> +
> + return ret;
> +}
> +
> +/*
> + * Write data to chip SRAM.
> + * window = 1 for RX
> + * window = 2 for User Data
> + * window = 3 for GP
> + */
Enum.
> +static int enc424j600_write_sram(struct enc424j600_net *priv,
> + const u8 *src, int len, u16 dstaddr,
> + int window)
> +{
> + int ret;
> +
> + if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
> + return -EINVAL;
> +
> + /* First set the general purpose write pointer */
> + if (window == 1)
> + priv->spi_tx_buf[0] = WRXWRPT;
> + else if (window == 2)
> + priv->spi_tx_buf[0] = WUDAWRPT;
> + else if (window == 3)
> + priv->spi_tx_buf[0] = WGPWRPT;
> +
> + priv->spi_tx_buf[1] = dstaddr & 0xFF;
> + priv->spi_tx_buf[2] = dstaddr >> 8;
> + ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
> +
> + /* Copy the data to the tx buffer */
> + memcpy(&priv->spi_tx_buf[1], src, len);
> +
> + /* Transfer the data */
> + if (window == 1)
> + priv->spi_tx_buf[0] = WRXDATA;
> + else if (window == 2)
> + priv->spi_tx_buf[0] = WUDADATA;
> + else if (window == 3)
> + priv->spi_tx_buf[0] = WGPDATA;
> +
> + ret = spi_write(priv->spi, priv->spi_tx_buf, len + 1);
> +
> + return ret;
> +}
> +
[...]
> +/*
> + * Write a 16bit special function register.
> + * The @sfr parameters takes address of the low byte of the register.
> + * Takes care of the endiannes & buffers.
> + * Uses banked write instruction.
> + */
> +
> +static int enc424j600_write_16b_sfr(struct enc424j600_net *priv,
> + u8 sfr, u16 data)
> +{
> + int ret;
> + enc424j600_set_bank(priv, sfr);
> +
> + priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
> + priv->spi_tx_buf[1] = data & 0xFF;
> + priv->spi_tx_buf[2] = data >> 8;
> + ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
> + if (ret && netif_msg_drv(priv))
> + printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
> + __func__, ret);
netif_dbg()
It's in 2.6.35 or later, though.
> +
> + return ret;
> +}
> +
> +/*
> + * Read a 16bit special function register.
> + * The @sfr parameters takes address of the low byte of the register.
> + * Takes care of the endiannes & buffers.
> + * Uses banked read instruction.
> + */
> +static int enc424j600_read_16b_sfr(struct enc424j600_net *priv,
> + u8 sfr, u16 *data)
> +{
> + int ret;
> + enc424j600_set_bank(priv, sfr);
> +
> + priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
> + priv->spi_tx_buf[1] = 0;
> + priv->spi_tx_buf[2] = 0;
> + priv->spi_tx_buf[3] = 0;
> + ret = enc424j600_spi_trans(priv, 3); /*READ*/
> +
> + *data = priv->spi_rx_buf[0] | priv->spi_rx_buf[1] << (u16) 8;
> +
> + return ret;
> +}
> +
> +/*
> + * Reset the enc424j600.
> + * TODO: What if we get stuck on non-working spi with the initial
> + * test access to EUDAST ?
> + */
> +static void enc424j600_soft_reset(struct enc424j600_net *priv)
> +{
> + u8 estath;
> + u16 eudast;
> + if (netif_msg_hw(priv))
> + printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
> +
> + do {
> + enc424j600_write_16b_sfr(priv, EUDASTL, EUDAST_TEST_VAL);
> + enc424j600_read_16b_sfr(priv, EUDASTL, &eudast);
> + } while (eudast != EUDAST_TEST_VAL);
> +
> + do {
> + enc424j600_read_8b_sfr(priv, ESTATH, &estath);
> + } while (!estath & CLKRDY);
Those loops need a timeout or you risk lockup with broken hardware.
> +
> + priv->spi_tx_buf[0] = SETETHRST;
> + enc424j600_spi_trans(priv, 1);
> +
> + udelay(50);
> +
> + enc424j600_read_16b_sfr(priv, EUDASTL, &eudast);
> + if (netif_msg_hw(priv) && eudast != 0)
> + printk(KERN_DEBUG DRV_NAME
> + ": %s() EUDASTL is not zero!\n", __func__);
> +
> + udelay(500);
Long enough for usleep() if there are no locks held.
> +}
> +
> +static unsigned long msec20_to_jiffies;
== HZ/50. It's constant AFAIR.
> +
> +/*
> + * Wait for bits in register to become equal to @readyMask, but at most 20ms.
> + */
> +static int poll_ready(struct enc424j600_net *priv,
> + u8 reg, u8 mask, u8 readyMask)
> +{
> + unsigned long timeout = jiffies + msec20_to_jiffies;
> + u8 value;
> + /* 20 msec timeout read */
> + enc424j600_read_8b_sfr(priv, reg, &value);
> + while ((value & mask) != readyMask) {
> + if (time_after(jiffies, timeout)) {
> + if (netif_msg_drv(priv))
> + dev_dbg(&priv->spi->dev,
> + "reg %02x ready timeout!\n", reg);
> + return -ETIMEDOUT;
> + }
> + cpu_relax();
> + enc424j600_read_8b_sfr(priv, reg, &value);
> + }
> +
> + return 0;
> +}
> +
[...]
> +/* Waits for autonegotiation to complete and sets FULDPX bit in macon2. */
> +static void enc424j600_wait_for_autoneg(struct enc424j600_net *priv)
> +{
> + u16 phstat1;
> + do {
> + enc424j600_phy_read(priv, PHSTAT1, &phstat1);
> + } while (!(phstat1 & ANDONE));
Timeout?
[...]
> +static int
> +enc424j600_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
> +{
> + struct enc424j600_net *priv = netdev_priv(ndev);
> + int ret = 0;
> + if (!priv->hw_enable) {
> + /* link is in low power mode now; duplex setting
> + * will take effect on next enc424j600_hw_init().
> + */
> + if (speed == SPEED_10 || speed == SPEED_100) {
> + priv->autoneg = (autoneg == AUTONEG_ENABLE);
> + priv->full_duplex = (duplex == DUPLEX_FULL);
> + priv->speed100 = (speed == SPEED_100);
> + } else {
> + if (netif_msg_link(priv))
> + dev_warn(&ndev->dev,
> + "unsupported link setting\n");
> + ret = -EOPNOTSUPP;
EINVAL
> + }
> + } else {
> + if (netif_msg_link(priv))
> + dev_warn(&ndev->dev, "Warning: hw must be disabled "
> + "to set link mode\n");
> + ret = -EBUSY;
> + }
> + return ret;
> +}
[...]
> +
> +/*
> + * Hardware receive function.
> + * Read the buffer memory, update the FIFO pointer to free the buffer,
> + * check the status vector and decrement the packet counter.
> + */
> +static void enc424j600_hw_rx(struct net_device *ndev)
> +{
> + struct enc424j600_net *priv = netdev_priv(ndev);
> + struct sk_buff *skb = NULL;
> + u16 erxrdpt, next_packet, rxstat;
> + u8 pkcnt;
> + u16 head, tail;
> + u8 rsv[RSV_SIZE];
> + u16 newrxtail;
> + int len;
> +
> + if (netif_msg_rx_status(priv))
> + printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
> + priv->next_pk_ptr);
> + if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
> + if (netif_msg_rx_err(priv))
> + dev_err(&ndev->dev,
> + "%s() Invalid packet address!! 0x%04x\n",
> + __func__, priv->next_pk_ptr);
> + mutex_lock(&priv->lock);
> + enc424j600_clear_bits(priv, ECON1L, RXEN);
> + enc424j600_set_bits(priv, ECON2L, RXRST);
> + enc424j600_clear_bits(priv, ECON2L, RXRST);
> + nolock_rxfifo_init(priv, RXSTART, RXEND_INIT);
> + enc424j600_clear_bits(priv, EIRL, RXABTIF);
> + enc424j600_set_bits(priv, ECON1L, RXEN);
> + mutex_unlock(&priv->lock);
> + ndev->stats.rx_errors++;
> + return;
> + }
> +
> + /* Read next packet pointer and rx status vector */
> + enc424j600_read_sram(priv, rsv, sizeof(rsv), priv->next_pk_ptr, 1);
> +
> + next_packet = rsv[1];
> + next_packet <<= 8;
> + next_packet |= rsv[0];
> +
> + len = rsv[3];
> + len <<= 8;
> + len |= rsv[2];
> +
> + rxstat = rsv[5];
> + rxstat <<= 8;
> + rxstat |= rsv[4];
> +
> + if (netif_msg_rx_status(priv))
> + enc424j600_dump_rsv(priv, __func__, next_packet, len, rxstat);
> +
> + if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
> + if (netif_msg_rx_err(priv))
> + dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
> + ndev->stats.rx_errors++;
> + if (RSV_GETBIT(rxstat, RSV_CRCERROR))
> + ndev->stats.rx_crc_errors++;
> + if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
> + ndev->stats.rx_frame_errors++;
> + if (len > MAX_FRAMELEN)
> + ndev->stats.rx_over_errors++;
> + } else {
> + skb = dev_alloc_skb(len + NET_IP_ALIGN);
> + if (!skb) {
> + if (netif_msg_rx_err(priv))
> + dev_err(&ndev->dev,
> + "out of memory for Rx'd frame\n");
> + ndev->stats.rx_dropped++;
> + } else {
> + skb->dev = ndev;
> + skb_reserve(skb, NET_IP_ALIGN);
> +
> + /* copy the packet from the receive buffer */
> + enc424j600_read_sram(priv, skb_put(skb, len), len,
> + rx_packet_start(priv->next_pk_ptr),
> + 1);
> +
> + if (netif_msg_pktdata(priv))
> + dump_packet(__func__, skb->len, skb->data);
> + skb->protocol = eth_type_trans(skb, ndev);
> + /* update statistics */
> + ndev->stats.rx_packets++;
> + ndev->stats.rx_bytes += len;
> + netif_rx_ni(skb);
I assume that this is not an IRQ context because of (slow) SPI
accesses. So use netif_rx() or better netif_receive_skb().
> + }
> + }
> + newrxtail = next_packet - 2;
> + if (next_packet == RXSTART)
> + newrxtail = SRAMSIZE - 2;
> +
> + enc424j600_write_16b_sfr(priv, ERXTAILL, newrxtail);
> + /*
> + * Move the RX read pointer to the start of the next
> + * received packet.
> + * This frees the memory we just read out
> + */
> + erxrdpt = erxrdpt_workaround(next_packet, RXSTART, RXEND_INIT);
> + if (netif_msg_hw(priv))
> + printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n", __func__,
> + erxrdpt);
> +
> + mutex_lock(&priv->lock);
Why do you need the lock here, but not on previous accesses to the hardware?
> + enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
> +
> +#ifdef CONFIG_ENC28J60_WRITEVERIFY
> + if (netif_msg_drv(priv)) {
> + u16 reg;
> +
> + enc424j600_read_16b_sfr(priv, ERXRDPTL, ®);
> + if (reg != erxrdpt)
> + printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
> + "error (0x%04x - 0x%04x)\n", __func__, reg,
> + erxrdpt);
> + }
> +#endif
> +
> + priv->next_pk_ptr = next_packet;
> + enc424j600_read_8b_sfr(priv, ESTATL, &pkcnt);
> + enc424j600_read_16b_sfr(priv, ERXHEADL, &head);
> + enc424j600_read_16b_sfr(priv, ERXTAILL, &tail);
> + /* we are done with this packet, decrement the packet counter */
> + enc424j600_set_bits(priv, ECON1H, PKTDEC);
> +
> + mutex_unlock(&priv->lock);
> +}
[...]
> +static irqreturn_t enc424j600_irq(int irq, void *dev_id)
> +{
> + struct enc424j600_net *priv = dev_id;
> + /*
> + * Can't do anything in interrupt context because we need to
> + * block (spi_sync() is blocking) so fire of the interrupt
> + * handling workqueue.
> + * Remember that we access enc424j600 registers through SPI bus
> + * via spi_sync() call.
> + */
> + schedule_work(&priv->irq_work);
> +
> + return IRQ_HANDLED;
> +}
You can use threaded interrupts here and get rid of irq_work. And
definitely disable source interrupt before returning. And after you do
that, you have implemented most of what's necessary for NAPI rx.
[...]
> +static void enc424j600_setrx_work_handler(struct work_struct *work)
> +{
> + u16 macon1;
> + struct enc424j600_net *priv =
> + container_of(work, struct enc424j600_net, setrx_work);
> +
> + if (priv->rxfilter == RXFILTER_PROMISC) {
> + if (netif_msg_drv(priv))
> + printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
> + enc424j600_read_16b_sfr(priv, MACON1L, &macon1);
> + macon1 = macon1 | PASSALL;
> + enc424j600_write_16b_sfr(priv, MACON1L, macon1);
> + locked_regb_write(priv, ERXFCONL, UCEN | MCEN | NOTMEEN);
> + } else if (priv->rxfilter == RXFILTER_MULTI) {
> + if (netif_msg_drv(priv))
> + printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
> + locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN | MCEN);
> +
> + } else {
> + if (netif_msg_drv(priv))
> + printk(KERN_DEBUG DRV_NAME ": normal mode\n");
> + locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN);
> +
> + }
> +}
> +
> +static void enc424j600_restart_work_handler(struct work_struct *work)
> +{
> + struct enc424j600_net *priv =
> + container_of(work, struct enc424j600_net, restart_work);
> + struct net_device *ndev = priv->netdev;
> + int ret;
> +
> + rtnl_lock();
> + if (netif_running(ndev)) {
> + enc424j600_net_close(ndev);
> + ret = enc424j600_net_open(ndev);
> + if (unlikely(ret)) {
> + dev_info(&ndev->dev, " could not restart %d\n", ret);
> + dev_close(ndev);
> + }
> + }
> + rtnl_unlock();
> +}
Are these work handlers guaranteed to not be scheduled concurrently?
[...]
> + /* If requested, allocate DMA buffers */
> + if (enc424j600_enable_dma) {
> + spi->dev.coherent_dma_mask = ~0;
> +
> + /*
> + * Minimum coherent DMA allocation is PAGE_SIZE, so allocate
> + * that much and share it between Tx and Rx DMA buffers.
> + */
> +#if SPI_TRANSFER_BUF_LEN > PAGE_SIZE / 2
> +#error "A problem in DMA buffer allocation"
> +#endif
> + priv->spi_tx_buf = dma_alloc_coherent(&spi->dev,
> + PAGE_SIZE,
> + &priv->spi_tx_dma,
> + GFP_DMA);
> +
> + if (priv->spi_tx_buf) {
> + priv->spi_rx_buf = (u8 *) (priv->spi_tx_buf +
> + (PAGE_SIZE / 2));
> + priv->spi_rx_dma = (dma_addr_t) (priv->spi_tx_dma +
> + (PAGE_SIZE / 2));
> + } else {
> + /* Fall back to non-DMA */
> + enc424j600_enable_dma = 0;
> + }
> + }
You don't use DMA addresses anywhere. And don't do anything with this
flag except for freeing the buffers. You should use streaming DMA
calls for skb data to avoid copying anyway and let the arch code care
about bounce buffers if needed.
[...]
MAINTAINTERS entry would be nice also.
Best Regards,
Michał Mirosław
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
2011-01-06 14:56 ` Michał Mirosław
@ 2011-01-09 9:00 ` Balaji Venkatachalam
2011-01-16 10:51 ` Balaji Venkatachalam
0 siblings, 1 reply; 14+ messages in thread
From: Balaji Venkatachalam @ 2011-01-09 9:00 UTC (permalink / raw)
To: Michał Mirosław
Cc: netdev, mohan, blue.cube, lanconelli.claudio, Sriram Subramanian
Thanks for the comments. I am working on them. Will post the updated patch soon.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
2011-01-09 9:00 ` Balaji Venkatachalam
@ 2011-01-16 10:51 ` Balaji Venkatachalam
2011-01-24 23:04 ` David Miller
0 siblings, 1 reply; 14+ messages in thread
From: Balaji Venkatachalam @ 2011-01-16 10:51 UTC (permalink / raw)
To: netdev
Cc: Michał Mirosław, mohan, blue.cube, lanconelli.claudio,
Sriram Subramanian
From: Balaji Venkatachalam <balaji.v@thotakaa.com>
Here is the updated patch for Microchip enc424j600 ethernet chip
controlled via SPI.
I tested it on my custom board with ARM9 (Freescale i.MX233) with
Kernel 2.6.31.14.
Changes done since V1.24 to V1.27
1. Timeout Mechanism implemented for enc424j600_soft_reset function
2. Timeout Mechanism implemented for enc424j600_wait_for_autoneg function
3. Window Naming changed to enum
4. Removed WRITEVERIFY functionality
Todo List:
1. Low Power Mode Functionality implementation
2. Provide Support for On-Chip DMA.
3. Remove mutex_lock wherever not required
Any comments are welcome.
Signed-off-by: Balaji Venkatachalam <balaji.v@thotakaa.com>
---
diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600.c
b/drivers/net/enc424j600.c
--- a/drivers/net/enc424j600.c 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/enc424j600.c 2011-01-16 16:15:33.000000000 +0530
@@ -0,0 +1,1710 @@
+/*
+ * Microchip ENC424J600 ethernet driver (MAC + PHY) on SPI bus
+ *
+ * Copyright (C) 2011 Thotaka Technologies Pvt Ltd
+ * Author: Balaji Venkatachalam <balaji.v@thotakaa.com>
+ * based on enc424j600.c written by Kuba Marek
+ * based on enc28j60.c written by Claudio Lanconelli
+ *
+ * Changes done since V1.24 to V1.27
+ * 1. Timeout Mechanism implemented for enc424j600_soft_reset function
+ * 2. Timeout Mechanism implemented for enc424j600_wait_for_autoneg function
+ * 3. Window Naming changed to enum
+ * 4. Removed WRITEVERIFY functionality
+ *
+ * Todo List:
+ * 1. Low Power Mode Functionality implementation
+ * 2. Provide Support for On-Chip DMA
+ * 3. Remove mutex_lock wherever not required
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+
+#include "enc424j600_hw.h"
+
+#define DRV_NAME "enc424j600"
+#define DRV_VERSION "1.27"
+
+#define ENC424J600_MSG_DEFAULT \
+ (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
+
+#define SPI_TRANSFER_BUF_LEN (4 + MAX_FRAMELEN)
+#define TX_TIMEOUT (4 * HZ)
+
+/* Max TX retries in case of collision as suggested by errata datasheet */
+#define MAX_TX_RETRYCOUNT 16
+
+#define SPI_OPLEN 1
+
+#define SRAMSIZE 0x6000
+#define TXSTART 0x0000
+#define RXSTART 0x1600
+
+static int enc424j600_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */
+
+enum {
+ RXFILTER_NORMAL,
+ RXFILTER_MULTI,
+ RXFILTER_PROMISC
+};
+enum {
+ RXWINDOW,
+ USERWINDOW,
+ GPWINDOW
+};
+
+/* Driver local data */
+struct enc424j600_net {
+ struct net_device *netdev;
+ struct spi_device *spi;
+ struct mutex lock;
+ struct sk_buff *tx_skb;
+ struct work_struct tx_work;
+ struct work_struct irq_work;
+ struct work_struct setrx_work;
+ struct work_struct restart_work;
+ u8 bank; /* current register bank selected */
+ u16 next_pk_ptr; /* next packet pointer within FIFO */
+ u16 max_pk_counter; /* statistics: max packet counter */
+ u16 tx_retry_count;
+ bool hw_enable;
+ bool full_duplex;
+ bool autoneg;
+ bool speed100;
+ int rxfilter;
+ u32 msg_enable;
+
+ u8 *spi_rx_buf;
+ u8 *spi_tx_buf;
+ dma_addr_t spi_tx_dma;
+ dma_addr_t spi_rx_dma;
+};
+
+/* use ethtool to change the level for any given device */
+static struct {
+ u32 msg_enable;
+} debug = {
+-1};
+
+static int enc424j600_spi_trans(struct enc424j600_net *priv, int len)
+{
+ /*modified to suit half duplexed spi */
+ struct spi_transfer tt = {
+ .tx_buf = priv->spi_tx_buf,
+ .len = SPI_OPLEN,
+ };
+ struct spi_transfer tr = {
+ .rx_buf = priv->spi_rx_buf,
+ .len = len,
+ };
+ struct spi_message m;
+ int ret;
+
+ spi_message_init(&m);
+
+ spi_message_add_tail(&tt, &m);
+ spi_message_add_tail(&tr, &m);
+
+ ret = spi_sync(priv->spi, &m);
+
+ if (ret == 0)
+ memcpy(priv->spi_rx_buf, tr.rx_buf, len);
+
+ if (ret)
+ dev_err(&priv->spi->dev,
+ "spi transfer failed: ret = %d\n", ret);
+ return ret;
+}
+
+/*
+ * Read data from chip SRAM.
+ * window = 0 for Receive Buffer
+ * = 1 for User Defined area
+ * = 2 for General Purpose area
+ */
+static int enc424j600_read_sram(struct enc424j600_net *priv,
+ u8 *dst, int len, u16 srcaddr, int window)
+{
+ int ret;
+
+ if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+ return -EINVAL;
+
+ /* First set the write pointer as per selected window */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXRDPT;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDARDPT;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPRDPT;
+
+ priv->spi_tx_buf[1] = srcaddr & 0xFF;
+ priv->spi_tx_buf[2] = srcaddr >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+
+ /* Transfer the data */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = RRXDATA;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = RUDADATA;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = RGPDATA;
+
+ ret = enc424j600_spi_trans(priv, len + 1);
+ /*READ*/
+ /* Copy the data from the rx buffer */
+ memcpy(dst, &priv->spi_rx_buf[0], len);
+
+ return ret;
+}
+
+/*
+ * Write data to chip SRAM.
+ * window = 1 for RX
+ * window = 2 for User Data
+ * window = 3 for GP
+ */
+static int enc424j600_write_sram(struct enc424j600_net *priv,
+ const u8 *src, int len, u16 dstaddr,
+ int window)
+{
+ int ret;
+
+ if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+ return -EINVAL;
+
+ /* First set the general purpose write pointer */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXWRPT;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDAWRPT;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPWRPT;
+
+ priv->spi_tx_buf[1] = dstaddr & 0xFF;
+ priv->spi_tx_buf[2] = dstaddr >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+
+ /* Copy the data to the tx buffer */
+ memcpy(&priv->spi_tx_buf[1], src, len);
+
+ /* Transfer the data */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXDATA;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDADATA;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPDATA;
+
+ ret = spi_write(priv->spi, priv->spi_tx_buf, len + 1);
+
+ return ret;
+}
+
+/*
+ * Select the current register bank if necessary to be able to read @addr.
+ */
+static void enc424j600_set_bank(struct enc424j600_net *priv, u8 addr)
+{
+ u8 b = (addr & BANK_MASK) >> BANK_SHIFT;
+
+ /* These registers are present in all banks, no need to switch bank */
+ if (addr >= EUDASTL && addr <= ECON1H)
+ return;
+ if (priv->bank == b)
+ return;
+
+ priv->spi_tx_buf[0] = BXSEL(b);
+
+ enc424j600_spi_trans(priv, 1);
+ /*WRITE*/ priv->bank = b;
+}
+
+/*
+ * Set bits in an 8bit SFR.
+ */
+static void enc424j600_set_bits(struct enc424j600_net *priv, u8 addr, u8 mask)
+{
+ enc424j600_set_bank(priv, addr);
+ priv->spi_tx_buf[0] = BFS(addr);
+ priv->spi_tx_buf[1] = mask;
+ spi_write(priv->spi, priv->spi_tx_buf, 2);
+}
+
+/*
+ * Clear bits in an 8bit SFR.
+ */
+static void enc424j600_clear_bits(struct enc424j600_net *priv, u8
addr, u8 mask)
+{
+ enc424j600_set_bank(priv, addr);
+ priv->spi_tx_buf[0] = BFC(addr);
+ priv->spi_tx_buf[1] = mask;
+ spi_write(priv->spi, priv->spi_tx_buf, 2);
+}
+
+/*
+ * Write a 8bit special function register.
+ * The @sfr parameters takes address of the register.
+ * Uses banked write instruction.
+ */
+static int enc424j600_write_8b_sfr(struct enc424j600_net *priv, u8
sfr, u8 data)
+{
+ int ret;
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = data & 0xFF;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 2);
+
+ return ret;
+}
+
+/*
+ * Read a 8bit special function register.
+ * The @sfr parameters takes address of the register.
+ * Uses banked read instruction.
+ */
+static int enc424j600_read_8b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u8 *data)
+{
+ int ret;
+
+ enc424j600_set_bank(priv, sfr);
+ priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
+ ret = enc424j600_spi_trans(priv, 2);
+ /*READ*/ *data = priv->spi_rx_buf[0];
+
+ return ret;
+}
+
+/*
+ * Write a 16bit special function register.
+ * The @sfr parameters takes address of the low byte of the register.
+ * Takes care of the endiannes & buffers.
+ * Uses banked write instruction.
+ */
+
+static int enc424j600_write_16b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u16 data)
+{
+ int ret;
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = data & 0xFF;
+ priv->spi_tx_buf[2] = data >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+ if (ret && netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
+ __func__, ret);
+
+ return ret;
+}
+
+/*
+ * Read a 16bit special function register.
+ * The @sfr parameters takes address of the low byte of the register.
+ * Takes care of the endiannes & buffers.
+ * Uses banked read instruction.
+ */
+static int enc424j600_read_16b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u16 *data)
+{
+ int ret;
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = 0;
+ priv->spi_tx_buf[2] = 0;
+ priv->spi_tx_buf[3] = 0;
+ ret = enc424j600_spi_trans(priv, 3);
+ /*READ*/ *data = priv->spi_rx_buf[0] | priv->spi_rx_buf[1] << (u16) 8;
+
+ return ret;
+}
+
+static unsigned long msec20_to_jiffies;
+
+/*
+ * Wait for bits in register to become equal to @readyMask, but at most 20ms.
+ */
+static int checktimeout_16bit(struct enc424j600_net *priv,
+ u8 reg, u16 mask, u16 readyMask)
+{
+ unsigned long timeout = jiffies + msec20_to_jiffies;
+ u16 value;
+ /* 20 msec timeout read */
+ enc424j600_read_16b_sfr(priv, reg, &value);
+ while ((value & mask) != readyMask) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_read_16b_sfr(priv, reg, &value);
+ }
+
+ return 0;
+}
+
+static int checktimeout_8bit(struct enc424j600_net *priv,
+ u8 reg, u8 mask, u8 readyMask)
+{
+ unsigned long timeout = jiffies + msec20_to_jiffies;
+ u8 value;
+ /* 20 msec timeout read */
+ enc424j600_read_8b_sfr(priv, reg, &value);
+ while ((value & mask) != readyMask) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_read_8b_sfr(priv, reg, &value);
+ }
+
+ return 0;
+}
+
+/*
+ * Reset the enc424j600.
+ */
+static int enc424j600_soft_reset(struct enc424j600_net *priv)
+{
+ int ret;
+ u16 eudast;
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ enc424j600_write_16b_sfr(priv, EUDASTL, EUDAST_TEST_VAL);
+ ret = checktimeout_16bit(priv, EUDASTL, 0xFFFF, EUDAST_TEST_VAL);
+ if (ret != 0)
+ return ret;
+ ret = checktimeout_16bit(priv, ESTATH, CLKRDY, CLKRDY);
+ if (ret != 0)
+ return ret;
+
+ priv->spi_tx_buf[0] = SETETHRST;
+ enc424j600_spi_trans(priv, 1);
+ /*inline with the datasheet */
+ udelay(25);
+
+ enc424j600_read_16b_sfr(priv, EUDASTL, &eudast);
+ if (netif_msg_hw(priv) && eudast != 0)
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() EUDASTL is not zero!\n", __func__);
+ /*inline with the datasheet */
+ /*datasheet says to wait for 256 usec atleast */
+ udelay(300);
+ return 0;
+}
+
+/*
+ * PHY register read
+ * PHY registers are not accessed directly, but through the MII
+ */
+static int enc424j600_phy_read(struct enc424j600_net *priv,
+ u16 address, u16 *data)
+{
+ int ret;
+
+ enc424j600_write_16b_sfr(priv, MIREGADRL,
+ address | (MIREGADRH_VAL << 8));
+ enc424j600_write_16b_sfr(priv, MICMDL, MIIRD);
+ udelay(26);
+ ret = !checktimeout_8bit(priv, MISTATL, BUSY, 0);
+ enc424j600_write_16b_sfr(priv, MICMDL, 0);
+ enc424j600_read_16b_sfr(priv, MIRDL, data);
+ return ret;
+}
+
+static int enc424j600_phy_write(struct enc424j600_net *priv, u16 address,
+ u16 data)
+{
+ enc424j600_write_16b_sfr(priv, MIREGADRL,
+ address | (MIREGADRH_VAL << 8));
+ enc424j600_write_16b_sfr(priv, MIWRL, data);
+ udelay(26);
+ return !checktimeout_8bit(priv, MISTATL, BUSY, 0);
+}
+
+/*
+ * Read the hardware MAC address to dev->dev_addr.
+ */
+static int enc424j600_get_hw_macaddr(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ u16 maadr1, maadr2, maadr3;
+
+ mutex_lock(&priv->lock);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MAC address to %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ enc424j600_read_16b_sfr(priv, MAADR3L, &maadr3);
+ ndev->dev_addr[5] = maadr3 >> 8;
+ ndev->dev_addr[4] = maadr3 & 0xff;
+ enc424j600_read_16b_sfr(priv, MAADR2L, &maadr2);
+ ndev->dev_addr[3] = maadr2 >> 8;
+ ndev->dev_addr[2] = maadr2 & 0xff;
+ enc424j600_read_16b_sfr(priv, MAADR1L, &maadr1);
+ ndev->dev_addr[1] = maadr1 >> 8;
+ ndev->dev_addr[0] = maadr1 & 0xff;
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+/*
+ * Program the hardware MAC address from dev->dev_addr.
+ */
+static int enc424j600_set_hw_macaddr(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+
+ mutex_lock(&priv->lock);
+
+ if (priv->hw_enable) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() Hardware must be disabled to set "
+ "Mac address\n", __func__);
+ mutex_unlock(&priv->lock);
+ return -EBUSY;
+ }
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MAC address to %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ enc424j600_write_16b_sfr(priv, MAADR3L,
+ ndev->dev_addr[4] | ndev->dev_addr[5] << 8);
+ enc424j600_write_16b_sfr(priv, MAADR2L,
+ ndev->dev_addr[2] | ndev->dev_addr[3] << 8);
+ enc424j600_write_16b_sfr(priv, MAADR1L,
+ ndev->dev_addr[0] | ndev->dev_addr[1] << 8);
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+/*
+ * Store the new hardware address in dev->dev_addr, and update the MAC.
+ */
+static int enc424j600_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *address = addr;
+
+ if (netif_running(dev))
+ return -EBUSY;
+ if (!is_valid_ether_addr(address->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
+ return enc424j600_set_hw_macaddr(dev);
+}
+
+u8 nolock_regb_read(struct enc424j600_net *priv, u8 address)
+{
+ u8 data;
+ enc424j600_read_8b_sfr(priv, address, &data);
+ return data;
+}
+
+u16 nolock_regw_read(struct enc424j600_net *priv, u8 address)
+{
+ u16 data;
+ enc424j600_read_16b_sfr(priv, address, &data);
+ return data;
+}
+
+/*Debug routine to dump useful register contents*/
+static void enc424j600_dump_regs(struct enc424j600_net *priv, const char *msg)
+{
+
+ mutex_lock(&priv->lock);
+ printk(KERN_DEBUG DRV_NAME " %s\n"
+ "Cntrl: ECON1H ECON1L ECON2H ECON2L ESTATH ESTATL EIRH "
+ "EIRL EIEH EIEL\n"
+ " 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x "
+ "0x%02x 0x%02x 0x%02x 0x%02x\n"
+ "MAC : MACON1 MACON2\n"
+ " 0x%04x 0x%04x\n"
+ "Rx : ERXST ERXTAIL ERXHEAD ERXWRPT ERXRDPT ERXFCON MAMXFL\n"
+ " 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n"
+ "Tx : ETXST ETXLEN MACLCON1 \n"
+ " 0x%04x 0x%04x 0x%02x\n",
+ msg,
+ nolock_regb_read(priv, ECON1H), nolock_regb_read(priv, ECON1L),
+ nolock_regb_read(priv, ECON2H), nolock_regb_read(priv, ECON2L),
+ nolock_regb_read(priv, ESTATH), nolock_regb_read(priv, ESTATL),
+ nolock_regb_read(priv, EIRH), nolock_regb_read(priv, EIRL),
+ nolock_regb_read(priv, EIEH), nolock_regb_read(priv, EIEL),
+ nolock_regw_read(priv, MACON1L), nolock_regw_read(priv, MACON2L),
+ nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXTAILL),
+ nolock_regw_read(priv, ERXHEADL),
+ nolock_regw_read(priv, ERXWRPTL), nolock_regw_read(priv,
+ ERXRDPTL),
+ nolock_regw_read(priv, ERXFCONL), nolock_regw_read(priv,
+ MAMXFLL),
+ nolock_regw_read(priv, ETXSTL), nolock_regw_read(priv, ETXLENL),
+ nolock_regw_read(priv, MACLCONL));
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * TODO: Check the functionality
+ * Low power mode shrinks power consumption about 100x, so we'd like
+ * the chip to be in that mode whenever it's inactive. (However, we
+ * can't stay in lowpower mode during suspend with WOL active.)
+ */
+static void enc424j600_lowpower(struct enc424j600_net *priv, bool is_low)
+{
+
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev, "%s power...\n",
+ is_low ? "low" : "high");
+
+#if 0
+ mutex_lock(&priv->lock);
+ if (is_low) {
+ nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+ checktimeout_8bit(priv, ESTAT, ESTAT_RXBUSY, 0);
+ checktimeout_8bit(priv, ECON1, ECON1_TXRTS, 0);
+ /* ECON2_VRPS was set during initialization */
+ nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
+ } else {
+ nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
+ checktimeout_8bit(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
+ /* caller sets ECON1_RXEN */
+ }
+ mutex_unlock(&priv->lock);
+#endif
+}
+
+static unsigned long msec2000_to_jiffies;
+/* Waits for autonegotiation to complete. */
+static int enc424j600_wait_for_autoneg(struct enc424j600_net *priv)
+{
+ unsigned long timeout = jiffies + msec2000_to_jiffies;
+ u16 value;
+ /* 20 msec timeout read */
+ enc424j600_phy_read(priv, PHSTAT1, &value);
+ while ((value & ANDONE) == 0) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", PHSTAT1);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_phy_read(priv, PHSTAT1, &value);
+ }
+ return 0;
+
+}
+
+/*
+ * Reset and initialize the chip, but don't enable interrupts and don't
+ * start receiving yet.
+ */
+static int enc424j600_hw_init(struct enc424j600_net *priv)
+{
+ u8 eidledl;
+ u16 phcon1;
+ u16 macon2;
+ u16 econ1l;
+ /*priv->autoneg = AUTONEG_ENABLE;*/
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
+ priv->
+ autoneg ? "Autoneg" : (priv->full_duplex ? "FullDuplex" :
+ "HalfDuplex"));
+
+ mutex_lock(&priv->lock);
+
+ priv->bank = 0;
+ priv->hw_enable = false;
+ priv->tx_retry_count = 0;
+ priv->max_pk_counter = 0;
+ priv->rxfilter = RXFILTER_NORMAL;
+
+ if (enc424j600_soft_reset(priv) != 0)
+ return 0;
+
+ /*
+ * Check the device id and silicon revision id.
+ */
+ enc424j600_read_8b_sfr(priv, EIDLEDL, &eidledl);
+
+ if ((eidledl & DEVID_MASK) >> DEVID_SHIFT != ENC424J600_DEV_ID) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() Invalid device ID: %d\n", __func__,
+ (eidledl & DEVID_MASK) >> DEVID_SHIFT);
+ return 0;
+ }
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME ": Silicon revision ID: 0x%02x\n",
+ (eidledl & REVID_MASK) >> REVID_SHIFT);
+
+ enc424j600_write_16b_sfr(priv, ETXSTL, TXSTART);
+ enc424j600_write_16b_sfr(priv, ERXSTL, RXSTART);
+
+ priv->next_pk_ptr = RXSTART;
+ enc424j600_write_16b_sfr(priv, ERXTAILL, SRAMSIZE - 2);
+ enc424j600_write_16b_sfr(priv, ERXFCONL, UCEN | BCEN | CRCEN | RUNTEN);
+
+ enc424j600_phy_write(priv, PHANA, PHANA_DEFAULT);
+
+ /* PHCON1 */
+ phcon1 = 0;
+ if (priv->autoneg) {
+ /* Enable autonegotiation and renegotiate */
+ phcon1 |= ANEN | RENEG;
+ } else {
+ if (priv->speed100)
+ phcon1 |= SPD100;
+ if (priv->full_duplex)
+ phcon1 |= PFULDPX;
+ }
+ enc424j600_phy_write(priv, PHCON1, phcon1);
+
+ /* MACON2
+ * defer transmission if collision occurs (only for half duplex)
+ * pad to 60 or 64 bytes and append CRC
+ * enable receiving huge frames (instead of limiting packet size) */
+ macon2 = MACON2_DEFER | PADCFG2 | PADCFG0 | TXCRCEN | HFRMEN;
+
+ /* If autonegotiation is enabled, we have to wait untill it finishes
+ * and set the PHYDPX bit in MACON2 correctly */
+ if (priv->autoneg) {
+ u8 estath;
+ if (!enc424j600_wait_for_autoneg(priv)) {
+ /* read the PHYDPX bit in ESTAT and set FULDPX in
+ MACON2 accordingly */
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ if (estath & PHYDPX)
+ macon2 |= FULDPX;
+ } else /*if timedout, just disable autoneg */
+ priv->autoneg = AUTONEG_DISABLE;
+ } else if (priv->full_duplex)
+ macon2 |= FULDPX;
+
+ enc424j600_write_16b_sfr(priv, MACON2L, macon2);
+
+ /* MAIPGL
+ * Recomended values for inter packet gaps */
+ if (!priv->autoneg) {
+ enc424j600_write_16b_sfr(priv, MAIPGL,
+ MAIPGL_VAL | (MAIPGH_VAL << 8));
+ }
+
+ /*
+ * Select enabled interrupts, but don't set the global
+ * interrupt enable flag.
+ */
+
+ enc424j600_write_16b_sfr(priv, EIEL,
+ LINKIE << 8 | PKTIE | DMAIE | TXIE | TXABTIE |
+ RXABTIE);
+
+ enc424j600_read_16b_sfr(priv, ECON1L, &econ1l);
+ econ1l |= (RXEN);
+ enc424j600_write_16b_sfr(priv, ECON1L, econ1l);
+
+ mutex_unlock(&priv->lock);
+
+ if (netif_msg_hw(priv))
+ enc424j600_dump_regs(priv, "Hw initialized.");
+
+ return 1;
+}
+
+static void enc424j600_hw_enable(struct enc424j600_net *priv)
+{
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
+ __func__);
+
+ mutex_lock(&priv->lock);
+
+ /* Clear any pending interrupts */
+ enc424j600_write_16b_sfr(priv, EIRL, 0);
+
+ /* Enable global interrupt flag */
+ enc424j600_set_bits(priv, EIEH, INTIE);
+
+ /* enable receive logic */
+ enc424j600_set_bits(priv, ECON1L, RXEN);
+ priv->hw_enable = true;
+ mutex_unlock(&priv->lock);
+}
+
+static void enc424j600_hw_disable(struct enc424j600_net *priv)
+{
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() disabling interrupts.\n",
+ __func__);
+
+ mutex_lock(&priv->lock);
+
+ /* disable receive logic */
+ enc424j600_clear_bits(priv, ECON1L, RXEN);
+
+ /* Disable global interrupt flag */
+ enc424j600_clear_bits(priv, EIEH, INTIE);
+
+ priv->hw_enable = false;
+
+ mutex_unlock(&priv->lock);
+}
+
+static int
+enc424j600_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ int ret = 0;
+ if (!priv->hw_enable) {
+ /* link is in low power mode now; duplex setting
+ * will take effect on next enc424j600_hw_init().
+ */
+ if (speed == SPEED_10 || speed == SPEED_100) {
+ priv->autoneg = (autoneg == AUTONEG_ENABLE);
+ priv->full_duplex = (duplex == DUPLEX_FULL);
+ priv->speed100 = (speed == SPEED_100);
+ } else {
+ if (netif_msg_link(priv))
+ dev_warn(&ndev->dev,
+ "unsupported link setting\n");
+ /*speeds other than SPEED_10 and SPEED_100 */
+ /*are not supported by chip */
+ ret = -EOPNOTSUPP;
+ }
+ } else {
+ if (netif_msg_link(priv))
+ dev_warn(&ndev->dev, "Warning: hw must be disabled "
+ "to set link mode\n");
+ ret = -EBUSY;
+ }
+ return ret;
+}
+
+/*
+ * Receive Status vector
+ */
+static void enc424j600_dump_rsv(struct enc424j600_net *priv, const char *msg,
+ u16 pk_ptr, int len, u16 sts)
+{
+ printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
+ msg, pk_ptr);
+ printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
+ RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
+ printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
+ " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
+ RSV_GETBIT(sts, RSV_CRCERROR),
+ RSV_GETBIT(sts, RSV_LENCHECKERR),
+ RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
+ printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
+ "LongDropEvent: %d, CarrierEvent: %d\n",
+ RSV_GETBIT(sts, RSV_RXMULTICAST),
+ RSV_GETBIT(sts, RSV_RXBROADCAST),
+ RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
+ RSV_GETBIT(sts, RSV_CARRIEREV));
+ printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
+ " UnknownOp: %d, VLanTagFrame: %d\n",
+ RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
+ RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
+ RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
+ RSV_GETBIT(sts, RSV_RXTYPEVLAN));
+}
+
+static void dump_packet(const char *msg, int len, const char *data)
+{
+
+ printk(KERN_ALERT ": %s - packet len:%d\n", msg, len);
+ print_hex_dump(KERN_ALERT, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
+ data, len, true);
+}
+
+/*
+ * Calculate wrap around when reading beyond the end of the RX buffer
+ */
+static u16 rx_packet_start(u16 ptr)
+{
+ if (ptr + RSV_SIZE > RXEND_INIT)
+ return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART + 1);
+ else
+ return ptr + RSV_SIZE;
+}
+
+/*
+ * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
+ */
+static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
+{
+ u16 erxrdpt;
+ if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
+ erxrdpt = end;
+ else
+ erxrdpt = next_packet_ptr - 1;
+
+ return erxrdpt;
+}
+
+static void nolock_rxfifo_init(struct enc424j600_net *priv, u16 start, u16 end)
+{
+ u16 erxrdpt;
+ if (start > 0x5FFF || end > 0x5FFF || start > end) {
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
+ "bad parameters!\n", __func__, start, end);
+ return;
+ }
+ /* set receive buffer start + end */
+ priv->next_pk_ptr = start;
+ enc424j600_write_16b_sfr(priv, ERXSTL, start);
+ erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
+ enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
+ enc424j600_write_16b_sfr(priv, ERXTAILL, end);
+}
+
+/*
+ * Hardware receive function.
+ * Read the buffer memory, update the FIFO pointer to free the buffer,
+ * check the status vector and decrement the packet counter.
+ */
+static void enc424j600_hw_rx(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ struct sk_buff *skb = NULL;
+ u16 erxrdpt, next_packet, rxstat;
+ u8 pkcnt;
+ u16 head, tail;
+ u8 rsv[RSV_SIZE];
+ u16 newrxtail;
+ int len;
+
+ if (netif_msg_rx_status(priv))
+ printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
+ priv->next_pk_ptr);
+ if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev,
+ "%s() Invalid packet address!! 0x%04x\n",
+ __func__, priv->next_pk_ptr);
+ mutex_lock(&priv->lock);
+ enc424j600_clear_bits(priv, ECON1L, RXEN);
+ enc424j600_set_bits(priv, ECON2L, RXRST);
+ enc424j600_clear_bits(priv, ECON2L, RXRST);
+ nolock_rxfifo_init(priv, RXSTART, RXEND_INIT);
+ enc424j600_clear_bits(priv, EIRL, RXABTIF);
+ enc424j600_set_bits(priv, ECON1L, RXEN);
+ mutex_unlock(&priv->lock);
+ ndev->stats.rx_errors++;
+ return;
+ }
+
+ /* Read next packet pointer and rx status vector */
+ enc424j600_read_sram(priv, rsv, sizeof(rsv), priv->next_pk_ptr,
+ RXWINDOW);
+
+ next_packet = rsv[1];
+ next_packet <<= 8;
+ next_packet |= rsv[0];
+
+ len = rsv[3];
+ len <<= 8;
+ len |= rsv[2];
+
+ rxstat = rsv[5];
+ rxstat <<= 8;
+ rxstat |= rsv[4];
+
+ if (netif_msg_rx_status(priv))
+ enc424j600_dump_rsv(priv, __func__, next_packet, len, rxstat);
+
+ if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
+ ndev->stats.rx_errors++;
+ if (RSV_GETBIT(rxstat, RSV_CRCERROR))
+ ndev->stats.rx_crc_errors++;
+ if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
+ ndev->stats.rx_frame_errors++;
+ if (len > MAX_FRAMELEN)
+ ndev->stats.rx_over_errors++;
+ } else {
+ skb = dev_alloc_skb(len + NET_IP_ALIGN);
+ if (!skb) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev,
+ "out of memory for Rx'd frame\n");
+ ndev->stats.rx_dropped++;
+ } else {
+ skb->dev = ndev;
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ /* copy the packet from the receive buffer */
+ enc424j600_read_sram(priv, skb_put(skb, len), len,
+ rx_packet_start(priv->next_pk_ptr),
+ RXWINDOW);
+
+ if (netif_msg_pktdata(priv))
+ dump_packet(__func__, skb->len, skb->data);
+ skb->protocol = eth_type_trans(skb, ndev);
+ /* update statistics */
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += len;
+ netif_rx_ni(skb);
+ }
+ }
+ newrxtail = next_packet - 2;
+ if (next_packet == RXSTART)
+ newrxtail = SRAMSIZE - 2;
+
+ enc424j600_write_16b_sfr(priv, ERXTAILL, newrxtail);
+ /*
+ * Move the RX read pointer to the start of the next
+ * received packet.
+ * This frees the memory we just read out
+ */
+ erxrdpt = erxrdpt_workaround(next_packet, RXSTART, RXEND_INIT);
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n", __func__,
+ erxrdpt);
+
+ /*TODO: remove mutex_lock wherever not required*/
+ mutex_lock(&priv->lock);
+ enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
+
+ priv->next_pk_ptr = next_packet;
+ enc424j600_read_8b_sfr(priv, ESTATL, &pkcnt);
+ enc424j600_read_16b_sfr(priv, ERXHEADL, &head);
+ enc424j600_read_16b_sfr(priv, ERXTAILL, &tail);
+ /* we are done with this packet, decrement the packet counter */
+ enc424j600_set_bits(priv, ECON1H, PKTDEC);
+
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * Access the PHY to determine link status
+ */
+static void enc424j600_check_link_status(struct enc424j600_net *priv)
+{
+ u8 estath;
+ u16 macon2;
+
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ if (estath & PHYLNK) {
+ if (priv->autoneg) {
+ if (!enc424j600_wait_for_autoneg(priv)) {
+ if (estath & PHYDPX) {
+ printk(KERN_ALERT "Full Duplex");
+ enc424j600_read_16b_sfr(priv, MACON2L,
+ &macon2);
+ macon2 |= FULDPX;
+ enc424j600_write_16b_sfr(priv, MACON2L,
+ macon2);
+ }
+ } else /*if timed out, disable autoneg and continue */
+ priv->autoneg = AUTONEG_DISABLE;
+ }
+ netif_carrier_on(priv->netdev);
+ if (netif_msg_ifup(priv))
+ dev_info(&(priv->netdev->dev), "link up\n");
+ } else {
+ if (netif_msg_ifdown(priv))
+ dev_info(&(priv->netdev->dev), "link down\n");
+ netif_carrier_off(priv->netdev);
+ }
+}
+
+static void enc424j600_tx_clear(struct enc424j600_net *priv, bool err)
+{
+ struct net_device *ndev = priv->netdev;
+ if (err)
+ ndev->stats.tx_errors++;
+ else
+ ndev->stats.tx_packets++;
+
+ if (priv->tx_skb) {
+ if (!err)
+ ndev->stats.tx_bytes += priv->tx_skb->len;
+ dev_kfree_skb(priv->tx_skb);
+ priv->tx_skb = NULL;
+ }
+
+ netif_wake_queue(ndev);
+}
+
+static int enc424j600_int_rx_abbort_handler(struct enc424j600_net *priv,
+ int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intRXAbt(%d)\n", loop);
+ mutex_lock(&priv->lock);
+ priv->netdev->stats.rx_dropped++;
+ enc424j600_clear_bits(priv, EIRL, RXABTIF);
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_link_handler(struct enc424j600_net *priv, int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intLINK(%d)\n", loop);
+
+ /* we check more than is necessary here --
+ * only PHYLNK would be needed. */
+ enc424j600_check_link_status(priv);
+
+ return loop;
+}
+
+static int enc424j600_int_tx_handler(struct enc424j600_net *priv, int loop)
+{
+ loop++;
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intTX(%d)\n", loop);
+
+ mutex_lock(&priv->lock);
+ enc424j600_tx_clear(priv, false);
+ enc424j600_clear_bits(priv, EIRL, TXIF);
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_tx_err_handler(struct enc424j600_net *priv, int loop)
+{
+ u8 etxstat;
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intTXErr(%d)\n", loop);
+
+ mutex_lock(&priv->lock);
+
+ enc424j600_read_8b_sfr(priv, ETXSTATH, &etxstat);
+
+ if (etxstat & LATECOL) {
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": Late collision TXErr (%d)\n",
+ priv->tx_retry_count);
+ if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
+ enc424j600_set_bits(priv, ECON1L, TXRTS);
+ else
+ enc424j600_tx_clear(priv, true);
+ } else if (etxstat & MAXCOL) {
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG DRV_NAME ": Max collisions TXErr\n");
+ enc424j600_tx_clear(priv, true);
+ } else {
+ enc424j600_tx_clear(priv, true);
+ }
+
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_received_packet_handler(struct enc424j600_net *priv)
+{
+ uint8_t pk_counter;
+ int ret;
+
+ enc424j600_read_8b_sfr(priv, ESTATL, &pk_counter);
+ if (pk_counter && netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
+ if (pk_counter > priv->max_pk_counter) {
+ /* update statistics */
+ priv->max_pk_counter = pk_counter;
+ if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
+ printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
+ priv->max_pk_counter);
+ }
+ ret = pk_counter;
+ while (pk_counter-- > 0)
+ enc424j600_hw_rx(priv->netdev);
+ return ret;
+}
+
+static void enc424j600_irq_work_handler(struct work_struct *work)
+{
+
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, irq_work);
+ int loop;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ /* disable further interrupts */
+ enc424j600_clear_bits(priv, EIEH, INTIE);
+
+ do {
+ u16 intflags;
+ enc424j600_read_16b_sfr(priv, EIRL, &intflags);
+ loop = 0;
+
+ /* LINK changed handler */
+ if ((intflags & LINKIF) != 0)
+ loop = enc424j600_int_link_handler(priv, loop);
+
+ /* TX complete handler */
+ if ((intflags & TXIF) != 0)
+ loop = enc424j600_int_tx_handler(priv, loop);
+
+ /* TX Error handler */
+ if ((intflags & TXABTIF) != 0) {
+ printk(KERN_ALERT "ABORTING TRANSMITTING PACKET");
+ loop = enc424j600_int_tx_err_handler(priv, loop);
+ }
+ /* RX Error handler */
+ if ((intflags & RXABTIF) != 0) {
+ printk(KERN_ALERT "ABORTING RECEIVED PACKET");
+ loop = enc424j600_int_rx_abbort_handler(priv, loop);
+ }
+ /* RX handler */
+ if ((intflags & PKTIF) != 0)
+ loop = enc424j600_int_received_packet_handler(priv);
+ enc424j600_clear_bits(priv, EIRL, intflags && 0xff);
+ enc424j600_clear_bits(priv, EIRH, intflags >> 8);
+ } while (loop);
+ /* re-enable interrupts */
+ enc424j600_set_bits(priv, EIEH, INTIE);
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
+}
+
+void locked_reg_bfset(struct enc424j600_net *priv, u8 addr, u8 mask)
+{
+ mutex_lock(&priv->lock);
+ enc424j600_set_bits(priv, addr, mask);
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * Hardware transmit function.
+ * Fill the buffer memory and send the contents of the transmit buffer
+ * onto the network
+ */
+static void enc424j600_hw_tx(struct enc424j600_net *priv)
+{
+ if (!priv->tx_skb) {
+ enc424j600_tx_clear(priv, false);
+ return;
+ }
+
+ if (netif_msg_tx_queued(priv))
+ printk(KERN_DEBUG DRV_NAME ": Tx Packet Len:%d\n",
+ priv->tx_skb->len);
+
+ if (netif_msg_pktdata(priv))
+ dump_packet(__func__, priv->tx_skb->len, priv->tx_skb->data);
+
+ enc424j600_write_sram(priv, priv->tx_skb->data, priv->tx_skb->len,
+ TXSTART, GPWINDOW);
+
+ /* Set the tx pointer to start of general purpose SRAM area */
+ enc424j600_write_16b_sfr(priv, ETXSTL, TXSTART);
+
+ /* Write the transfer length */
+ enc424j600_write_16b_sfr(priv, ETXLENL, priv->tx_skb->len);
+
+ /* set TX request flag */
+ locked_reg_bfset(priv, ECON1L, TXRTS);
+}
+
+static int enc424j600_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+ if (netif_msg_tx_queued(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ /* If some error occurs while trying to transmit this
+ * packet, you should return '1' from this function.
+ * In such a case you _may not_ do anything to the
+ * SKB, it is still owned by the network queueing
+ * layer when an error is returned. This means you
+ * may not modify any SKB fields, you may not free
+ * the SKB, etc.
+ */
+ netif_stop_queue(dev);
+
+ /* save the timestamp */
+ priv->netdev->trans_start = jiffies;
+ /* Remember the skb for deferred processing */
+ priv->tx_skb = skb;
+ schedule_work(&priv->tx_work);
+
+ return NETDEV_TX_OK;
+}
+
+static void enc424j600_tx_work_handler(struct work_struct *work)
+{
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, tx_work);
+
+ /* actual delivery of data */
+ enc424j600_hw_tx(priv);
+}
+
+static irqreturn_t enc424j600_irq(int irq, void *dev_id)
+{
+ struct enc424j600_net *priv = dev_id;
+ /*
+ * Can't do anything in interrupt context because we need to
+ * block (spi_sync() is blocking) so fire of the interrupt
+ * handling workqueue.
+ * Remember that we access enc424j600 registers through SPI bus
+ * via spi_sync() call.
+ */
+ schedule_work(&priv->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void enc424j600_tx_timeout(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+
+ if (netif_msg_timer(priv))
+ dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
+
+ ndev->stats.tx_errors++;
+ /* can't restart safely under softirq */
+ schedule_work(&priv->restart_work);
+}
+
+/*
+ * Open/initialize the board. This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+static int enc424j600_net_open(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ if (netif_msg_ifup(priv))
+ dev_err(&dev->dev, "invalid MAC address %pM\n",
+ dev->dev_addr);
+ return -EADDRNOTAVAIL;
+ }
+ /* Reset the hardware here (and take it out of low power mode) */
+ enc424j600_lowpower(priv, false);
+ enc424j600_hw_disable(priv);
+ if (!enc424j600_hw_init(priv)) {
+ if (netif_msg_ifup(priv))
+ dev_err(&dev->dev, "hw_reset() failed\n");
+ return -EINVAL;
+ }
+ /* Update the MAC address (in case user has changed it) */
+ enc424j600_set_hw_macaddr(dev);
+ /* Enable interrupts */
+ enc424j600_hw_enable(priv);
+ /* check link status */
+ enc424j600_check_link_status(priv);
+ /* We are now ready to accept transmit requests from
+ * the queueing layer of the networking.
+ */
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/* The inverse routine to net_open(). */
+static int enc424j600_net_close(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ enc424j600_hw_disable(priv);
+ enc424j600_lowpower(priv, true);
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+/*
+ * Set or clear the multicast filter for this adapter
+ * num_addrs == -1 Promiscuous mode, receive all packets
+ * num_addrs == 0 Normal mode, filter out multicast packets
+ * num_addrs > 0 Multicast mode, receive normal and MC packets
+ */
+static void enc424j600_set_multicast_list(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+ int oldfilter = priv->rxfilter;
+
+ if (dev->flags & IFF_PROMISC) {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "promiscuous mode\n");
+ priv->rxfilter = RXFILTER_PROMISC;
+ } else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "%smulticast mode\n",
+ (dev->flags & IFF_ALLMULTI) ? "all-" : "");
+ priv->rxfilter = RXFILTER_MULTI;
+ } else {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "normal mode\n");
+ priv->rxfilter = RXFILTER_NORMAL;
+ }
+
+ if (oldfilter != priv->rxfilter)
+ schedule_work(&priv->setrx_work);
+}
+
+void locked_regb_write(struct enc424j600_net *priv, u8 address, u8 data)
+{
+ mutex_lock(&priv->lock);
+ enc424j600_write_8b_sfr(priv, address, data);
+ mutex_unlock(&priv->lock);
+}
+
+static void enc424j600_setrx_work_handler(struct work_struct *work)
+{
+ u16 macon1;
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, setrx_work);
+
+ if (priv->rxfilter == RXFILTER_PROMISC) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
+ enc424j600_read_16b_sfr(priv, MACON1L, &macon1);
+ macon1 = macon1 | PASSALL;
+ enc424j600_write_16b_sfr(priv, MACON1L, macon1);
+ locked_regb_write(priv, ERXFCONL, UCEN | MCEN | NOTMEEN);
+ } else if (priv->rxfilter == RXFILTER_MULTI) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
+ locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN | MCEN);
+
+ } else {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": normal mode\n");
+ locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN);
+
+ }
+}
+
+static void enc424j600_restart_work_handler(struct work_struct *work)
+{
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, restart_work);
+ struct net_device *ndev = priv->netdev;
+ int ret;
+
+ rtnl_lock();
+ if (netif_running(ndev)) {
+ enc424j600_net_close(ndev);
+ ret = enc424j600_net_open(ndev);
+ if (unlikely(ret)) {
+ dev_info(&ndev->dev, " could not restart %d\n", ret);
+ dev_close(ndev);
+ }
+ }
+ rtnl_unlock();
+}
+
+/* ......................... ETHTOOL SUPPORT ........................... */
+
+static void
+enc424j600_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+ strlcpy(info->bus_info,
+ dev_name(dev->dev.parent), sizeof(info->bus_info));
+}
+
+static int
+enc424j600_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->supported = SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_TP;
+
+ cmd->speed = priv->speed100 ? SPEED_100 : SPEED_10;
+ cmd->duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
+ cmd->port = PORT_TP;
+ cmd->autoneg = priv->autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+ return 0;
+}
+
+static int
+enc424j600_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ return enc424j600_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
+}
+
+static u32 enc424j600_get_msglevel(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ return priv->msg_enable;
+}
+
+static void enc424j600_set_msglevel(struct net_device *dev, u32 val)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ priv->msg_enable = val;
+}
+
+static const struct ethtool_ops enc424j600_ethtool_ops = {
+ .get_settings = enc424j600_get_settings,
+ .set_settings = enc424j600_set_settings,
+ .get_drvinfo = enc424j600_get_drvinfo,
+ .get_msglevel = enc424j600_get_msglevel,
+ .set_msglevel = enc424j600_set_msglevel,
+};
+
+static int enc424j600_chipset_init(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ enc424j600_get_hw_macaddr(dev);
+ return enc424j600_hw_init(priv);
+
+}
+
+static const struct net_device_ops enc424j600_netdev_ops = {
+ .ndo_open = enc424j600_net_open,
+ .ndo_stop = enc424j600_net_close,
+ .ndo_start_xmit = enc424j600_send_packet,
+ .ndo_set_multicast_list = enc424j600_set_multicast_list,
+ .ndo_set_mac_address = enc424j600_set_mac_address,
+ .ndo_tx_timeout = enc424j600_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int __devinit enc424j600_probe(struct spi_device *spi)
+{
+ struct net_device *dev;
+ struct enc424j600_net *priv;
+ int ret = 0;
+
+ if (netif_msg_drv(&debug))
+ dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
+ DRV_VERSION);
+
+ dev = alloc_etherdev(sizeof(struct enc424j600_net));
+ if (!dev) {
+ if (netif_msg_drv(&debug))
+ dev_err(&spi->dev, DRV_NAME
+ ": unable to alloc new ethernet\n");
+ ret = -ENOMEM;
+ goto error_alloc;
+ }
+ priv = netdev_priv(dev);
+
+ priv->netdev = dev; /* priv to netdev reference */
+ priv->spi = spi; /* priv to spi reference */
+ priv->msg_enable = netif_msg_init(debug.msg_enable,
+ ENC424J600_MSG_DEFAULT);
+ mutex_init(&priv->lock);
+ INIT_WORK(&priv->tx_work, enc424j600_tx_work_handler);
+ INIT_WORK(&priv->setrx_work, enc424j600_setrx_work_handler);
+ INIT_WORK(&priv->irq_work, enc424j600_irq_work_handler);
+ INIT_WORK(&priv->restart_work, enc424j600_restart_work_handler);
+ dev_set_drvdata(&spi->dev, priv); /* spi to priv reference */
+ SET_NETDEV_DEV(dev, &spi->dev);
+ /*TODO: chip DMA features to be utilized */
+ /* If requested, allocate DMA buffers */
+ if (enc424j600_enable_dma) {
+ spi->dev.coherent_dma_mask = ~0;
+
+ /*
+ * Minimum coherent DMA allocation is PAGE_SIZE, so allocate
+ * that much and share it between Tx and Rx DMA buffers.
+ */
+#if SPI_TRANSFER_BUF_LEN > PAGE_SIZE / 2
+#error "A problem in DMA buffer allocation"
+#endif
+ priv->spi_tx_buf = dma_alloc_coherent(&spi->dev,
+ PAGE_SIZE,
+ &priv->spi_tx_dma,
+ GFP_DMA);
+
+ if (priv->spi_tx_buf) {
+ priv->spi_rx_buf = (u8 *) (priv->spi_tx_buf +
+ (PAGE_SIZE / 2));
+ priv->spi_rx_dma = (dma_addr_t) (priv->spi_tx_dma +
+ (PAGE_SIZE / 2));
+ } else {
+ /* Fall back to non-DMA */
+ enc424j600_enable_dma = 0;
+ }
+ }
+
+ /* Allocate non-DMA buffers */
+ if (!enc424j600_enable_dma) {
+ priv->spi_tx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_tx_buf) {
+ ret = -ENOMEM;
+ goto error_tx_buf;
+ }
+ priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_rx_buf) {
+ ret = -ENOMEM;
+ goto error_rx_buf;
+ }
+ }
+
+ if (!enc424j600_chipset_init(dev)) {
+ if (netif_msg_probe(priv))
+ dev_info(&spi->dev, DRV_NAME " chip not found\n");
+ ret = -EIO;
+ goto error_irq;
+ }
+
+ /* Board setup must set the relevant edge trigger type;
+ * level triggers won't currently work.
+ */
+ ret = request_irq(spi->irq, enc424j600_irq, 0, DRV_NAME, priv);
+ if (ret < 0) {
+ if (netif_msg_probe(priv))
+ dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
+ "(ret = %d)\n", spi->irq, ret);
+ goto error_irq;
+ }
+
+ dev->if_port = IF_PORT_10BASET;
+ dev->irq = spi->irq;
+ dev->netdev_ops = &enc424j600_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ SET_ETHTOOL_OPS(dev, &enc424j600_ethtool_ops);
+
+ enc424j600_lowpower(priv, true);
+
+ ret = register_netdev(dev);
+ if (ret) {
+ if (netif_msg_probe(priv))
+ dev_err(&spi->dev, "register netdev " DRV_NAME
+ " failed (ret = %d)\n", ret);
+ goto error_register;
+ }
+ dev_info(&dev->dev, DRV_NAME " driver registered\n");
+
+ return 0;
+
+error_register:
+ free_irq(spi->irq, priv);
+error_irq:
+ free_netdev(dev);
+ if (!enc424j600_enable_dma)
+ kfree(priv->spi_rx_buf);
+error_rx_buf:
+ if (!enc424j600_enable_dma)
+ kfree(priv->spi_tx_buf);
+error_tx_buf:
+ if (enc424j600_enable_dma) {
+ dma_free_coherent(&spi->dev, PAGE_SIZE,
+ priv->spi_tx_buf, priv->spi_tx_dma);
+ }
+error_alloc:
+ return ret;
+}
+
+static int __devexit enc424j600_remove(struct spi_device *spi)
+{
+ struct enc424j600_net *priv = dev_get_drvdata(&spi->dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": remove\n");
+
+ unregister_netdev(priv->netdev);
+ free_irq(spi->irq, priv);
+ free_netdev(priv->netdev);
+
+ return 0;
+}
+
+static struct spi_driver enc424j600_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = enc424j600_probe,
+ .remove = __devexit_p(enc424j600_remove),
+};
+
+static int __init enc424j600_init(void)
+{
+ msec20_to_jiffies = msecs_to_jiffies(20);
+ /*autoneg works from 1600ms */
+ msec2000_to_jiffies = msecs_to_jiffies(2000);
+
+ return spi_register_driver(&enc424j600_driver);
+}
+
+module_init(enc424j600_init);
+
+static void __exit enc424j600_exit(void)
+{
+ spi_unregister_driver(&enc424j600_driver);
+}
+
+module_exit(enc424j600_exit);
+
+MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
+MODULE_AUTHOR("Balaji Venkatachalam <balaji.v@thotakaa.com>");
+MODULE_LICENSE("GPL");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");
+module_param(enc424j600_enable_dma, int, S_IRUGO);
+MODULE_PARM_DESC(enc424j600_enable_dma, "Enable SPI DMA. Default: 0 (Off)");
+MODULE_ALIAS("spi:" DRV_NAME);
diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600_hw.h
b/drivers/net/enc424j600_hw.h
--- a/drivers/net/enc424j600_hw.h 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/enc424j600_hw.h 2011-01-05 23:51:24.000000000 +0530
@@ -0,0 +1,460 @@
+/*
+* enc424j600_hw.h: Register definitions
+*
+*/
+
+#ifndef _ENC424J600_HW_H
+#define _ENC424J600_HW_H
+
+/*
+* ENC424J600 Control Registers
+* Control register definitions are a combination of address
+* and bank number
+* - Register address (bits 0-4)
+* - Bank number (bits 5-6)
+*/
+#define ADDR_MASK 0x1F
+#define BANK_MASK 0x60
+#define BANK_SHIFT 5
+
+/* All-bank registers */
+#define EUDASTL 0x16
+#define EUDASTH 0x17
+#define EUDANDL 0x18
+#define EUDANDH 0x19
+#define ESTATL 0x1A
+#define ESTATH 0x1B
+#define EIRL 0x1C
+#define EIRH 0x1D
+#define ECON1L 0x1E
+#define ECON1H 0x1F
+
+/* Bank 0 registers */
+#define ETXSTL (0x00 | 0x00)
+#define ETXSTH (0x01 | 0x00)
+#define ETXLENL (0x02 | 0x00)
+#define ETXLENH (0x03 | 0x00)
+#define ERXSTL (0x04 | 0x00)
+#define ERXSTH (0x05 | 0x00)
+#define ERXTAILL (0x06 | 0x00)
+#define ERXTAILH (0x07 | 0x00)
+#define ERXHEADL (0x08 | 0x00)
+#define ERXHEADH (0x09 | 0x00)
+#define EDMASTL (0x0A | 0x00)
+#define EDMASTH (0x0B | 0x00)
+#define EDMALENL (0x0C | 0x00)
+#define EDMALENH (0x0D | 0x00)
+#define EDMADSTL (0x0E | 0x00)
+#define EDMADSTH (0x0F | 0x00)
+#define EDMACSL (0x10 | 0x00)
+#define EDMACSH (0x11 | 0x00)
+#define ETXSTATL (0x12 | 0x00)
+#define ETXSTATH (0x13 | 0x00)
+#define ETXWIREL (0x14 | 0x00)
+#define ETXWIREH (0x15 | 0x00)
+
+/* Bank 1 registers */
+#define EHT1L (0x00 | 0x20)
+#define EHT1H (0x01 | 0x20)
+#define EHT2L (0x02 | 0x20)
+#define EHT2H (0x03 | 0x20)
+#define EHT3L (0x04 | 0x20)
+#define EHT3H (0x05 | 0x20)
+#define EHT4L (0x06 | 0x20)
+#define EHT4H (0x07 | 0x20)
+#define EPMM1L (0x08 | 0x20)
+#define EPMM1H (0x09 | 0x20)
+#define EPMM2L (0x0A | 0x20)
+#define EPMM2H (0x0B | 0x20)
+#define EPMM3L (0x0C | 0x20)
+#define EPMM3H (0x0D | 0x20)
+#define EPMM4L (0x0E | 0x20)
+#define EPMM4H (0x0F | 0x20)
+#define EPMCSL (0x10 | 0x20)
+#define EPMCSH (0x11 | 0x20)
+#define EPMOL (0x12 | 0x20)
+#define EPMOH (0x13 | 0x20)
+#define ERXFCONL (0x14 | 0x20)
+#define ERXFCONH (0x15 | 0x20)
+
+/* Bank 2 registers */
+#define MACON1L (0x00 | 0x40)
+#define MACON1H (0x01 | 0x40)
+#define MACON2L (0x02 | 0x40)
+#define MACON2H (0x03 | 0x40)
+#define MABBIPGL (0x04 | 0x40)
+#define MABBIPGH (0x05 | 0x40)
+#define MAIPGL (0x06 | 0x40)
+#define MAIPGH (0x07 | 0x40)
+#define MACLCONL (0x08 | 0x40)
+#define MACLCONH (0x09 | 0x40)
+#define MAMXFLL (0x0A | 0x40)
+#define MAMXFLH (0x0B | 0x40)
+#define MICMDL (0x12 | 0x40)
+#define MICMDH (0x13 | 0x40)
+#define MIREGADRL (0x14 | 0x40)
+#define MIREGADRH (0x15 | 0x40)
+
+/* Bank 3 registers */
+#define MAADR3L (0x00 | 0x60)
+#define MAADR3H (0x01 | 0x60)
+#define MAADR2L (0x02 | 0x60)
+#define MAADR2H (0x03 | 0x60)
+#define MAADR1L (0x04 | 0x60)
+#define MAADR1H (0x05 | 0x60)
+#define MIWRL (0x06 | 0x60)
+#define MIWRH (0x07 | 0x60)
+#define MIRDL (0x08 | 0x60)
+#define MIRDH (0x09 | 0x60)
+#define MISTATL (0x0A | 0x60)
+#define MISTATH (0x0B | 0x60)
+#define EPAUSL (0x0C | 0x60)
+#define EPAUSH (0x0D | 0x60)
+#define ECON2L (0x0E | 0x60)
+#define ECON2H (0x0F | 0x60)
+#define ERXWML (0x10 | 0x60)
+#define ERXWMH (0x11 | 0x60)
+#define EIEL (0x12 | 0x60)
+#define EIEH (0x13 | 0x60)
+#define EIDLEDL (0x14 | 0x60)
+#define EIDLEDH (0x15 | 0x60)
+
+/* Unbanked registers */
+#define EGPDATA (0x00 | 0x80)
+#define ERXDATA (0x02 | 0x80)
+#define EUDADATA (0x04 | 0x80)
+#define EGPRDPTL (0x06 | 0x80)
+#define EGPRDPTH (0x07 | 0x80)
+#define EGPWRPTL (0x08 | 0x80)
+#define EGPWRPTH (0x09 | 0x80)
+#define ERXRDPTL (0x0A | 0x80)
+#define ERXRDPTH (0x0B | 0x80)
+#define ERXWRPTL (0x0C | 0x80)
+#define ERXWRPTH (0x0D | 0x80)
+#define EUDARDPTL (0x0E | 0x80)
+#define EUDARDPTH (0x0F | 0x80)
+#define EUDAWRPTL (0x10 | 0x80)
+#define EUDAWRPTH (0x11 | 0x80)
+
+/* PHY registers */
+#define PHCON1 0x00
+#define PHSTAT1 0x01
+#define PHANA 0x04
+#define PHANLPA 0x05
+#define PHANE 0x06
+#define PHCON2 0x11
+#define PHSTAT2 0x1B
+#define PHSTAT3 0x1F
+
+/* Single-byte instructions */
+#define BXSEL(bank) (0xC0 + (bank & (BANK_MASK >> BANK_SHIFT)) * 2)
+/* Bank X Select */
+#define B0SEL 0xC0 /* Bank 0 Select */
+#define B1SEL 0xC2 /* Bank 1 Select */
+#define B2SEL 0xC4 /* Bank 2 Select */
+#define B3SEL 0xC6 /* Bank 3 Select */
+#define SETETHRST 0xCA /* System Reset */
+#define FCDISABLE 0xE0 /* Flow Control Disable */
+#define FCSINGLE 0xE2 /* Flow Control Single */
+#define FCMULTIPLE 0xE4 /* Flow Control Multiple */
+#define FCCLEAR 0xE6 /* Flow Control Clear */
+#define SETPKTDEC 0xCC /* Decrement Packet Counter */
+#define DMASTOP 0xD2 /* DMA Stop */
+#define DMACKSUM 0xD8 /* DMA Start Checksum */
+#define DMACKSUMS 0xDA /* DMA Start Checksum with Seed */
+#define DMACOPY 0xDC /* DMA Start Copy */
+#define DMACOPYS 0xDE /* DMA Start Copy and Checksum with Seed */
+#define SETTXRTS 0xD4 /* Request Packet Transmission */
+#define ENABLERX 0xE8 /* Enable RX */
+#define DISABLERX 0xEA /* Disable RX */
+#define SETEIE 0xEC /* Enable Interrupts */
+#define CLREIE 0xEE /* Disable Interrupts */
+
+/* Two byte instructions */
+#define RBSEL 0xC8 /* Read Bank Select */
+
+/* Three byte instructions */
+#define WGPRDPT 0x60 /* Write EGPRDPT */
+#define RGPRDPT 0x62 /* Read EGPRDPT */
+#define WRXRDPT 0x64 /* Write ERXRDPT */
+#define RRXRDPT 0x66 /* Read ERXRDPT */
+#define WUDARDPT 0x68 /* Write EUDARDPT */
+#define RUDARDPT 0x6A /* Read EUDARDPT */
+#define WGPWRPT 0x6C /* Write EGPWRPT */
+#define RGPWRPT 0x6E /* Read EGPWRPT */
+#define WRXWRPT 0x70 /* Write ERXWRPT */
+#define RRXWRPT 0x72 /* Read ERXWRPT */
+#define WUDAWRPT 0x74 /* Write EUDAWRPT */
+#define RUDAWRPT 0x76 /* Read EUDAWRPT */
+
+/* n byte instructions */
+#define RCR(addr) (0x00 | (addr & ADDR_MASK)) /* Read Control Register */
+#define WCR(addr) (0x40 | (addr & ADDR_MASK)) /* Write Control Register */
+#define RCRU 0x20 /* Read Control Register Unbanked */
+#define WCRU 0x22 /* Write Control Register Unbanked */
+#define BFS(addr) (0x80 | (addr & ADDR_MASK)) /* Bit Field Set */
+#define BFC(addr) (0xA0 | (addr & ADDR_MASK)) /* Bit Field Clear */
+#define BFSU 0x24 /* Bit Field Set Unbanked */
+#define BFCU 0x26 /* Bit Field Clear Unbanked */
+#define RGPDATA 0x28 /* Read EGPDATA */
+#define WGPDATA 0x2A /* Write EGPDATA */
+#define RRXDATA 0x2C /* Read ERXDATA */
+#define WRXDATA 0x2E /* Write ERXDATA */
+#define RUDADATA 0x30 /* Read EUDADATA */
+#define WUDADATA 0x32 /* Write EUDADATA */
+
+/* Register bit definitions */
+/* ESTATH */
+#define INT (1 << 7)
+#define FCIDLE (1 << 6)
+#define RXBUSY (1 << 5)
+#define CLKRDY (1 << 4)
+#define PHYDPX (1 << 2)
+#define PHYLNK (1 << 0)
+
+/* EIRH */
+/*for ease of use lets access it as a word*/
+#define CRYPTEN (1 << 15)
+#define MODEXIF (1 << 14)
+#define HASHIF (1 << 13)
+#define AESIF (1 << 12)
+#define LINKIF (1 << 11)
+
+/* EIRL */
+#define PKTIF (1 << 6)
+#define DMAIF (1 << 5)
+#define TXIF (1 << 3)
+#define TXABTIF (1 << 2)
+#define RXABTIF (1 << 1)
+#define PCFULIF (1 << 0)
+
+/* ECON1H */
+#define MODEXST (1 << 7)
+#define HASHEN (1 << 6)
+#define HASHOP (1 << 5)
+#define HASHLST (1 << 4)
+#define AESST (1 << 3)
+#define AESOP1 (1 << 2)
+#define AESOP0 (1 << 1)
+#define PKTDEC (1 << 0)
+
+/* ECON1L */
+#define FCOP1 (1 << 7)
+#define FCOP0 (1 << 6)
+#define DMAST (1 << 5)
+#define DMACPY (1 << 4)
+#define DMACSSD (1 << 3)
+#define DMANOCS (1 << 2)
+#define TXRTS (1 << 1)
+#define RXEN (1 << 0)
+
+/* ETXSTATH */
+#define LATECOL (1 << 2)
+#define MAXCOL (1 << 1)
+#define EXDEFER (1 << 0)
+
+/* ETXSTATL */
+#define ETXSTATL_DEFER (1 << 7)
+#define CRCBAD (1 << 4)
+#define COLCNT_MASK 0xF
+
+/* ERXFCONH */
+#define HTEN (1 << 7)
+#define MPEN (1 << 6)
+#define NOTPM (1 << 4)
+#define PMEN3 (1 << 3)
+#define PMEN2 (1 << 2)
+#define PMEN1 (1 << 1)
+#define PMEN0 (1 << 0)
+
+/* ERXFCONL */
+#define CRCEEN (1 << 7)
+#define CRCEN (1 << 6)
+#define RUNTEEN (1 << 5)
+#define RUNTEN (1 << 4)
+#define UCEN (1 << 3)
+#define NOTMEEN (1 << 2)
+#define MCEN (1 << 1)
+#define BCEN (1 << 0)
+/*no bytewise access*/
+/* MACON1L */
+#define LOOPBK (1 << 4)
+#define RXPAUS (1 << 2)
+#define PASSALL (1 << 1)
+
+/* MACON2 */
+#define MACON2_DEFER (1 << 14)
+#define BPEN (1 << 13)
+#define NOBKOFF (1 << 12)
+#define PADCFG2 (1 << 7)
+#define PADCFG1 (1 << 6)
+#define PADCFG0 (1 << 5)
+#define TXCRCEN (1 << 4)
+#define PHDREN (1 << 3)
+#define HFRMEN (1 << 2)
+#define FULDPX (1 << 0)
+
+/* MAIPG */
+/* value of the high byte is given by the reserved bits,
+* value of the low byte is recomended setting of the
+* IPG parameter.
+*/
+#define MAIPGH_VAL 0x0C
+#define MAIPGL_VAL 0x12
+
+/* MIREGADRH */
+#define MIREGADRH_VAL 0x01
+
+/* MIREGADRL */
+#define PHREG_MASK 0x1F
+
+/* MICMDL */
+#define MIISCAN (1 << 1)
+#define MIIRD (1 << 0)
+
+/* MISTATL */
+#define NVALID (1 << 2)
+#define SCAN (1 << 1)
+#define BUSY (1 << 0)
+
+/* ECON2H */
+#define ETHEN (1 << 7)
+#define STRCH (1 << 6)
+#define TXMAC (1 << 5)
+#define SHA1MD5 (1 << 4)
+#define COCON3 (1 << 3)
+#define COCON2 (1 << 2)
+#define COCON1 (1 << 1)
+#define COCON0 (1 << 0)
+
+/* ECON2L */
+#define AUTOFC (1 << 7)
+#define TXRST (1 << 6)
+#define RXRST (1 << 5)
+#define ETHRST (1 << 4)
+#define MODLEN1 (1 << 3)
+#define MODLEN0 (1 << 2)
+#define AESLEN1 (1 << 1)
+#define AESLEN0 (1 << 0)
+
+/* EIEH */
+#define INTIE (1 << 7)
+#define MODEXIE (1 << 6)
+#define HASHIE (1 << 5)
+#define AESIE (1 << 4)
+#define LINKIE (1 << 3)
+
+/* EIEL */
+#define PKTIE (1 << 6)
+#define DMAIE (1 << 5)
+#define TXIE (1 << 3)
+#define TXABTIE (1 << 2)
+#define RXABTIE (1 << 1)
+#define PCFULIE (1 << 0)
+
+/* EIDLEDH */
+#define LACFG3 (1 << 7)
+#define LACFG2 (1 << 6)
+#define LACFG1 (1 << 5)
+#define LACFG0 (1 << 4)
+#define LBCFG3 (1 << 3)
+#define LBCFG2 (1 << 2)
+#define LBCFG1 (1 << 1)
+#define LBCFG0 (1 << 0)
+
+/* EIDLEDL */
+#define DEVID_SHIFT 5
+#define DEVID_MASK (0x7 << DEVID_SHIFT)
+#define REVID_SHIFT 0
+#define REVID_MASK (0x1F << REVID_SHIFT)
+
+/* PHANA */
+/* Default value for PHY initialization*/
+#define PHANA_DEFAULT 0x05E1
+
+/* PHCON1 */
+#define PRST (1 << 15)
+#define PLOOPBK (1 << 14)
+#define SPD100 (1 << 13)
+#define ANEN (1 << 12)
+#define PSLEEP (1 << 11)
+#define RENEG (1 << 9)
+#define PFULDPX (1 << 8)
+
+/* PHSTAT */
+#define FULL100 (1 << 14)
+#define HALF100 (1 << 13)
+#define FULL10 (1 << 12)
+#define HALF10 (1 << 11)
+#define ANDONE (1 << 5)
+#define LRFAULT (1 << 4)
+#define ANABLE (1 << 3)
+#define LLSTAT (1 << 2)
+#define EXTREGS (1 << 0)
+
+#define EUDAST_TEST_VAL 0x1234
+
+#define TSV_SIZE 7
+
+#define ENC424J600_DEV_ID 0x1
+
+/* Configuration */
+
+/* Led is on when the link is present and driven low
+* temporarily when packet is TX'd or RX'd */
+#define LED_A_SETTINGS 0xC
+
+/* Led is on if the link is in 100 Mbps mode */
+#define LED_B_SETTINGS 0x8
+
+/* maximum ethernet frame length
+* Currently not used as a limit anywhere
+* (we're using the "huge frame enable" feature of
+* enc424j600). */
+#define MAX_FRAMELEN 1518
+
+/* Size in bytes of the receive buffer in enc424j600.
+* Must be word aligned (even).
+*/
+#define RX_BUFFER_SIZE (15 * MAX_FRAMELEN)
+
+/* Start of the general purpose area in sram */
+#define SRAM_GP_START 0x0
+
+/* SRAM size */
+#define SRAM_SIZE 0x6000
+
+/* Start of the receive buffer */
+#define ERXST_VAL (SRAM_SIZE - RX_BUFFER_SIZE)
+
+#define RSV_RXLONGEVDROPEV 16
+#define RSV_CARRIEREV 18
+#define RSV_CRCERROR 20
+#define RSV_LENCHECKERR 21
+#define RSV_LENOUTOFRANGE 22
+#define RSV_RXOK 23
+#define RSV_RXMULTICAST 24
+#define RSV_RXBROADCAST 25
+#define RSV_DRIBBLENIBBLE 26
+#define RSV_RXCONTROLFRAME 27
+#define RSV_RXPAUSEFRAME 28
+#define RSV_RXUNKNOWNOPCODE 29
+#define RSV_RXTYPEVLAN 30
+
+#define RSV_RUNTFILTERMATCH 31
+#define RSV_NOTMEFILTERMATCH 32
+#define RSV_HASHFILTERMATCH 33
+#define RSV_MAGICPKTFILTERMATCH 34
+#define RSV_PTRNMTCHFILTERMATCH 35
+#define RSV_UNICASTFILTERMATCH 36
+
+#define RSV_SIZE 8
+#define RSV_BITMASK(x) (1 << ((x) - 16))
+#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0)
+
+/* Put RX buffer at 0 as suggested by the Errata datasheet */
+
+#define RXSTART_INIT ERXST_VAL
+#define RXEND_INIT 0x5FFF
+
+#endif
diff -uprN -X a/Documentation/dontdiff a/drivers/net/Kconfig
b/drivers/net/Kconfig
--- a/drivers/net/Kconfig 2010-07-05 22:41:43.000000000 +0530
+++ b/drivers/net/Kconfig 2011-01-16 15:26:16.000000000 +0530
@@ -973,6 +973,16 @@ config ENC28J60_WRITEVERIFY
Enable the verify after the buffer write useful for debugging purpose.
If unsure, say N.
+config ENC424J600
+ tristate "ENC424J600 support"
+ depends on EXPERIMENTAL && SPI && NET_ETHERNET
+ select CRC32
+ ---help---
+ Support for the Microchip EN424J600 ethernet chip.
+
+ To compile this driver as a module, choose M here. The module will be
+ called enc424j600.
+
config ETHOC
tristate "OpenCores 10/100 Mbps Ethernet MAC support"
depends on NET_ETHERNET && HAS_IOMEM
diff -uprN -X a/Documentation/dontdiff a/drivers/net/Makefile
b/drivers/net/Makefile
--- a/drivers/net/Makefile 2010-07-05 22:41:43.000000000 +0530
+++ b/drivers/net/Makefile 2011-01-05 21:46:57.000000000 +0530
@@ -240,6 +240,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_d
pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
+obj-$(CONFIG_ENC424J600) += enc424j600.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
2011-01-16 10:51 ` Balaji Venkatachalam
@ 2011-01-24 23:04 ` David Miller
2011-01-29 8:24 ` Balaji Venkatachalam
0 siblings, 1 reply; 14+ messages in thread
From: David Miller @ 2011-01-24 23:04 UTC (permalink / raw)
To: balaji.v; +Cc: netdev, mirqus, mohan, blue.cube, lanconelli.claudio, sriram
From: Balaji Venkatachalam <balaji.v@thotakaa.com>
Date: Sun, 16 Jan 2011 16:21:45 +0530
> +/* use ethtool to change the level for any given device */
> +static struct {
> + u32 msg_enable;
> +} debug = {
> +-1};
Please format this code reasonably.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
2011-01-24 23:04 ` David Miller
@ 2011-01-29 8:24 ` Balaji Venkatachalam
2011-01-30 10:14 ` Balaji Venkatachalam
0 siblings, 1 reply; 14+ messages in thread
From: Balaji Venkatachalam @ 2011-01-29 8:24 UTC (permalink / raw)
To: David Miller; +Cc: netdev, mirqus, mohan, blue.cube, lanconelli.claudio, sriram
From: Balaji Venkatachalam <balaji.v@thotakaa.com>
Updated patch for Microchip enc424j600 ethernet chip controlled via SPI.
I tested it on my custom board with ARM9 (Freescale i.MX233) with
Kernel 2.6.31.14.
Changes done since V1.27 to V1.28
1. did some code formatting at line no 110
Changes done since V1.24 to V1.27
1. Timeout Mechanism implemented for enc424j600_soft_reset function
2. Timeout Mechanism implemented for enc424j600_wait_for_autoneg function
3. Window Naming changed to enum
4. Removed WRITEVERIFY functionality
Todo List:
1. Low Power Mode Functionality implementation
2. Provide Support for On-Chip DMA.
3. Remove mutex_lock wherever not required
Any comments are welcome.
Signed-off-by: Balaji Venkatachalam <balaji.v@thotakaa.com>
---
diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600.c
b/drivers/net/enc424j600.c
--- a/drivers/net/enc424j600.c 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/enc424j600.c 2011-01-29 13:26:31.000000000 +0530
@@ -0,0 +1,1712 @@
+/*
+ * Microchip ENC424J600 ethernet driver (MAC + PHY) on SPI bus
+ *
+ * Copyright (C) 2011 Thotaka Technologies Pvt Ltd
+ * Author: Balaji Venkatachalam <balaji.v@thotakaa.com>
+ * based on enc424j600.c written by Kuba Marek
+ * based on enc28j60.c written by Claudio Lanconelli
+ *
+ * Changes done since V1.27 to V1.28
+ * 1. did some code formatting at line no 110
+ *
+ * Changes done since V1.24 to V1.27
+ * 1. Timeout Mechanism implemented for enc424j600_soft_reset function
+ * 2. Timeout Mechanism implemented for enc424j600_wait_for_autoneg function
+ * 3. Window Naming changed to enum
+ * 4. Removed WRITEVERIFY functionality
+ *
+ * Todo List:
+ * 1. Low Power Mode Functionality implementation
+ * 2. Provide Support for On-Chip DMA
+ * 3. Remove mutex_lock wherever not required
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+
+#include "enc424j600_hw.h"
+
+#define DRV_NAME "enc424j600"
+#define DRV_VERSION "1.28"
+
+#define ENC424J600_MSG_DEFAULT \
+ (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
+
+#define SPI_TRANSFER_BUF_LEN (4 + MAX_FRAMELEN)
+#define TX_TIMEOUT (4 * HZ)
+
+/* Max TX retries in case of collision as suggested by errata datasheet */
+#define MAX_TX_RETRYCOUNT 16
+
+#define SPI_OPLEN 1
+
+#define SRAMSIZE 0x6000
+#define TXSTART 0x0000
+#define RXSTART 0x1600
+
+static int enc424j600_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */
+
+enum {
+ RXFILTER_NORMAL,
+ RXFILTER_MULTI,
+ RXFILTER_PROMISC
+};
+enum {
+ RXWINDOW,
+ USERWINDOW,
+ GPWINDOW
+};
+
+/* Driver local data */
+struct enc424j600_net {
+ struct net_device *netdev;
+ struct spi_device *spi;
+ struct mutex lock;
+ struct sk_buff *tx_skb;
+ struct work_struct tx_work;
+ struct work_struct irq_work;
+ struct work_struct setrx_work;
+ struct work_struct restart_work;
+ u8 bank; /* current register bank selected */
+ u16 next_pk_ptr; /* next packet pointer within FIFO */
+ u16 max_pk_counter; /* statistics: max packet counter */
+ u16 tx_retry_count;
+ bool hw_enable;
+ bool full_duplex;
+ bool autoneg;
+ bool speed100;
+ int rxfilter;
+ u32 msg_enable;
+
+ u8 *spi_rx_buf;
+ u8 *spi_tx_buf;
+ dma_addr_t spi_tx_dma;
+ dma_addr_t spi_rx_dma;
+};
+
+/* use ethtool to change the level for any given device */
+static struct {
+ u32 msg_enable;
+} debug = { -1 };
+
+static int enc424j600_spi_trans(struct enc424j600_net *priv, int len)
+{
+ /*modified to suit half duplexed spi */
+ struct spi_transfer tt = {
+ .tx_buf = priv->spi_tx_buf,
+ .len = SPI_OPLEN,
+ };
+ struct spi_transfer tr = {
+ .rx_buf = priv->spi_rx_buf,
+ .len = len,
+ };
+ struct spi_message m;
+ int ret;
+
+ spi_message_init(&m);
+
+ spi_message_add_tail(&tt, &m);
+ spi_message_add_tail(&tr, &m);
+
+ ret = spi_sync(priv->spi, &m);
+
+ if (ret == 0)
+ memcpy(priv->spi_rx_buf, tr.rx_buf, len);
+
+ if (ret)
+ dev_err(&priv->spi->dev,
+ "spi transfer failed: ret = %d\n", ret);
+ return ret;
+}
+
+/*
+ * Read data from chip SRAM.
+ * window = 0 for Receive Buffer
+ * = 1 for User Defined area
+ * = 2 for General Purpose area
+ */
+static int enc424j600_read_sram(struct enc424j600_net *priv,
+ u8 *dst, int len, u16 srcaddr, int window)
+{
+ int ret;
+
+ if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+ return -EINVAL;
+
+ /* First set the write pointer as per selected window */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXRDPT;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDARDPT;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPRDPT;
+
+ priv->spi_tx_buf[1] = srcaddr & 0xFF;
+ priv->spi_tx_buf[2] = srcaddr >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+
+ /* Transfer the data */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = RRXDATA;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = RUDADATA;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = RGPDATA;
+
+ ret = enc424j600_spi_trans(priv, len + 1);
+ /*READ*/
+ /* Copy the data from the rx buffer */
+ memcpy(dst, &priv->spi_rx_buf[0], len);
+
+ return ret;
+}
+
+/*
+ * Write data to chip SRAM.
+ * window = 1 for RX
+ * window = 2 for User Data
+ * window = 3 for GP
+ */
+static int enc424j600_write_sram(struct enc424j600_net *priv,
+ const u8 *src, int len, u16 dstaddr,
+ int window)
+{
+ int ret;
+
+ if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+ return -EINVAL;
+
+ /* First set the general purpose write pointer */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXWRPT;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDAWRPT;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPWRPT;
+
+ priv->spi_tx_buf[1] = dstaddr & 0xFF;
+ priv->spi_tx_buf[2] = dstaddr >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+
+ /* Copy the data to the tx buffer */
+ memcpy(&priv->spi_tx_buf[1], src, len);
+
+ /* Transfer the data */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXDATA;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDADATA;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPDATA;
+
+ ret = spi_write(priv->spi, priv->spi_tx_buf, len + 1);
+
+ return ret;
+}
+
+/*
+ * Select the current register bank if necessary to be able to read @addr.
+ */
+static void enc424j600_set_bank(struct enc424j600_net *priv, u8 addr)
+{
+ u8 b = (addr & BANK_MASK) >> BANK_SHIFT;
+
+ /* These registers are present in all banks, no need to switch bank */
+ if (addr >= EUDASTL && addr <= ECON1H)
+ return;
+ if (priv->bank == b)
+ return;
+
+ priv->spi_tx_buf[0] = BXSEL(b);
+
+ enc424j600_spi_trans(priv, 1);
+ /*WRITE*/ priv->bank = b;
+}
+
+/*
+ * Set bits in an 8bit SFR.
+ */
+static void enc424j600_set_bits(struct enc424j600_net *priv, u8 addr, u8 mask)
+{
+ enc424j600_set_bank(priv, addr);
+ priv->spi_tx_buf[0] = BFS(addr);
+ priv->spi_tx_buf[1] = mask;
+ spi_write(priv->spi, priv->spi_tx_buf, 2);
+}
+
+/*
+ * Clear bits in an 8bit SFR.
+ */
+static void enc424j600_clear_bits(struct enc424j600_net *priv, u8
addr, u8 mask)
+{
+ enc424j600_set_bank(priv, addr);
+ priv->spi_tx_buf[0] = BFC(addr);
+ priv->spi_tx_buf[1] = mask;
+ spi_write(priv->spi, priv->spi_tx_buf, 2);
+}
+
+/*
+ * Write a 8bit special function register.
+ * The @sfr parameters takes address of the register.
+ * Uses banked write instruction.
+ */
+static int enc424j600_write_8b_sfr(struct enc424j600_net *priv, u8
sfr, u8 data)
+{
+ int ret;
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = data & 0xFF;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 2);
+
+ return ret;
+}
+
+/*
+ * Read a 8bit special function register.
+ * The @sfr parameters takes address of the register.
+ * Uses banked read instruction.
+ */
+static int enc424j600_read_8b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u8 *data)
+{
+ int ret;
+
+ enc424j600_set_bank(priv, sfr);
+ priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
+ ret = enc424j600_spi_trans(priv, 2);
+ /*READ*/ *data = priv->spi_rx_buf[0];
+
+ return ret;
+}
+
+/*
+ * Write a 16bit special function register.
+ * The @sfr parameters takes address of the low byte of the register.
+ * Takes care of the endiannes & buffers.
+ * Uses banked write instruction.
+ */
+
+static int enc424j600_write_16b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u16 data)
+{
+ int ret;
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = data & 0xFF;
+ priv->spi_tx_buf[2] = data >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+ if (ret && netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
+ __func__, ret);
+
+ return ret;
+}
+
+/*
+ * Read a 16bit special function register.
+ * The @sfr parameters takes address of the low byte of the register.
+ * Takes care of the endiannes & buffers.
+ * Uses banked read instruction.
+ */
+static int enc424j600_read_16b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u16 *data)
+{
+ int ret;
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = 0;
+ priv->spi_tx_buf[2] = 0;
+ priv->spi_tx_buf[3] = 0;
+ ret = enc424j600_spi_trans(priv, 3);
+ /*READ*/ *data = priv->spi_rx_buf[0] | priv->spi_rx_buf[1] << (u16) 8;
+
+ return ret;
+}
+
+static unsigned long msec20_to_jiffies;
+
+/*
+ * Wait for bits in register to become equal to @readyMask, but at most 20ms.
+ */
+static int checktimeout_16bit(struct enc424j600_net *priv,
+ u8 reg, u16 mask, u16 readyMask)
+{
+ unsigned long timeout = jiffies + msec20_to_jiffies;
+ u16 value;
+ /* 20 msec timeout read */
+ enc424j600_read_16b_sfr(priv, reg, &value);
+ while ((value & mask) != readyMask) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_read_16b_sfr(priv, reg, &value);
+ }
+
+ return 0;
+}
+
+static int checktimeout_8bit(struct enc424j600_net *priv,
+ u8 reg, u8 mask, u8 readyMask)
+{
+ unsigned long timeout = jiffies + msec20_to_jiffies;
+ u8 value;
+ /* 20 msec timeout read */
+ enc424j600_read_8b_sfr(priv, reg, &value);
+ while ((value & mask) != readyMask) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_read_8b_sfr(priv, reg, &value);
+ }
+
+ return 0;
+}
+
+/*
+ * Reset the enc424j600.
+ */
+static int enc424j600_soft_reset(struct enc424j600_net *priv)
+{
+ int ret;
+ u16 eudast;
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ enc424j600_write_16b_sfr(priv, EUDASTL, EUDAST_TEST_VAL);
+ ret = checktimeout_16bit(priv, EUDASTL, 0xFFFF, EUDAST_TEST_VAL);
+ if (ret != 0)
+ return ret;
+ ret = checktimeout_16bit(priv, ESTATH, CLKRDY, CLKRDY);
+ if (ret != 0)
+ return ret;
+
+ priv->spi_tx_buf[0] = SETETHRST;
+ enc424j600_spi_trans(priv, 1);
+ /*inline with the datasheet */
+ udelay(25);
+
+ enc424j600_read_16b_sfr(priv, EUDASTL, &eudast);
+ if (netif_msg_hw(priv) && eudast != 0)
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() EUDASTL is not zero!\n", __func__);
+ /*inline with the datasheet */
+ /*datasheet says to wait for 256 usec atleast */
+ udelay(300);
+ return 0;
+}
+
+/*
+ * PHY register read
+ * PHY registers are not accessed directly, but through the MII
+ */
+static int enc424j600_phy_read(struct enc424j600_net *priv,
+ u16 address, u16 *data)
+{
+ int ret;
+
+ enc424j600_write_16b_sfr(priv, MIREGADRL,
+ address | (MIREGADRH_VAL << 8));
+ enc424j600_write_16b_sfr(priv, MICMDL, MIIRD);
+ udelay(26);
+ ret = !checktimeout_8bit(priv, MISTATL, BUSY, 0);
+ enc424j600_write_16b_sfr(priv, MICMDL, 0);
+ enc424j600_read_16b_sfr(priv, MIRDL, data);
+ return ret;
+}
+
+static int enc424j600_phy_write(struct enc424j600_net *priv, u16 address,
+ u16 data)
+{
+ enc424j600_write_16b_sfr(priv, MIREGADRL,
+ address | (MIREGADRH_VAL << 8));
+ enc424j600_write_16b_sfr(priv, MIWRL, data);
+ udelay(26);
+ return !checktimeout_8bit(priv, MISTATL, BUSY, 0);
+}
+
+/*
+ * Read the hardware MAC address to dev->dev_addr.
+ */
+static int enc424j600_get_hw_macaddr(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ u16 maadr1, maadr2, maadr3;
+
+ mutex_lock(&priv->lock);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MAC address to %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ enc424j600_read_16b_sfr(priv, MAADR3L, &maadr3);
+ ndev->dev_addr[5] = maadr3 >> 8;
+ ndev->dev_addr[4] = maadr3 & 0xff;
+ enc424j600_read_16b_sfr(priv, MAADR2L, &maadr2);
+ ndev->dev_addr[3] = maadr2 >> 8;
+ ndev->dev_addr[2] = maadr2 & 0xff;
+ enc424j600_read_16b_sfr(priv, MAADR1L, &maadr1);
+ ndev->dev_addr[1] = maadr1 >> 8;
+ ndev->dev_addr[0] = maadr1 & 0xff;
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+/*
+ * Program the hardware MAC address from dev->dev_addr.
+ */
+static int enc424j600_set_hw_macaddr(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+
+ mutex_lock(&priv->lock);
+
+ if (priv->hw_enable) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() Hardware must be disabled to set "
+ "Mac address\n", __func__);
+ mutex_unlock(&priv->lock);
+ return -EBUSY;
+ }
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MAC address to %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ enc424j600_write_16b_sfr(priv, MAADR3L,
+ ndev->dev_addr[4] | ndev->dev_addr[5] << 8);
+ enc424j600_write_16b_sfr(priv, MAADR2L,
+ ndev->dev_addr[2] | ndev->dev_addr[3] << 8);
+ enc424j600_write_16b_sfr(priv, MAADR1L,
+ ndev->dev_addr[0] | ndev->dev_addr[1] << 8);
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+/*
+ * Store the new hardware address in dev->dev_addr, and update the MAC.
+ */
+static int enc424j600_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *address = addr;
+
+ if (netif_running(dev))
+ return -EBUSY;
+ if (!is_valid_ether_addr(address->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
+ return enc424j600_set_hw_macaddr(dev);
+}
+
+u8 nolock_regb_read(struct enc424j600_net *priv, u8 address)
+{
+ u8 data;
+ enc424j600_read_8b_sfr(priv, address, &data);
+ return data;
+}
+
+u16 nolock_regw_read(struct enc424j600_net *priv, u8 address)
+{
+ u16 data;
+ enc424j600_read_16b_sfr(priv, address, &data);
+ return data;
+}
+
+/*Debug routine to dump useful register contents*/
+static void enc424j600_dump_regs(struct enc424j600_net *priv, const char *msg)
+{
+
+ mutex_lock(&priv->lock);
+ printk(KERN_DEBUG DRV_NAME " %s\n"
+ "Cntrl: ECON1H ECON1L ECON2H ECON2L ESTATH ESTATL EIRH "
+ "EIRL EIEH EIEL\n"
+ " 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x "
+ "0x%02x 0x%02x 0x%02x 0x%02x\n"
+ "MAC : MACON1 MACON2\n"
+ " 0x%04x 0x%04x\n"
+ "Rx : ERXST ERXTAIL ERXHEAD ERXWRPT ERXRDPT ERXFCON MAMXFL\n"
+ " 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n"
+ "Tx : ETXST ETXLEN MACLCON1 \n"
+ " 0x%04x 0x%04x 0x%02x\n",
+ msg,
+ nolock_regb_read(priv, ECON1H), nolock_regb_read(priv, ECON1L),
+ nolock_regb_read(priv, ECON2H), nolock_regb_read(priv, ECON2L),
+ nolock_regb_read(priv, ESTATH), nolock_regb_read(priv, ESTATL),
+ nolock_regb_read(priv, EIRH), nolock_regb_read(priv, EIRL),
+ nolock_regb_read(priv, EIEH), nolock_regb_read(priv, EIEL),
+ nolock_regw_read(priv, MACON1L), nolock_regw_read(priv, MACON2L),
+ nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXTAILL),
+ nolock_regw_read(priv, ERXHEADL),
+ nolock_regw_read(priv, ERXWRPTL), nolock_regw_read(priv,
+ ERXRDPTL),
+ nolock_regw_read(priv, ERXFCONL), nolock_regw_read(priv,
+ MAMXFLL),
+ nolock_regw_read(priv, ETXSTL), nolock_regw_read(priv, ETXLENL),
+ nolock_regw_read(priv, MACLCONL));
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * TODO: Check the functionality
+ * Low power mode shrinks power consumption about 100x, so we'd like
+ * the chip to be in that mode whenever it's inactive. (However, we
+ * can't stay in lowpower mode during suspend with WOL active.)
+ */
+static void enc424j600_lowpower(struct enc424j600_net *priv, bool is_low)
+{
+
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev, "%s power...\n",
+ is_low ? "low" : "high");
+
+#if 0
+ mutex_lock(&priv->lock);
+ if (is_low) {
+ nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+ checktimeout_8bit(priv, ESTAT, ESTAT_RXBUSY, 0);
+ checktimeout_8bit(priv, ECON1, ECON1_TXRTS, 0);
+ /* ECON2_VRPS was set during initialization */
+ nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
+ } else {
+ nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
+ checktimeout_8bit(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
+ /* caller sets ECON1_RXEN */
+ }
+ mutex_unlock(&priv->lock);
+#endif
+}
+
+static unsigned long msec2000_to_jiffies;
+/* Waits for autonegotiation to complete. */
+static int enc424j600_wait_for_autoneg(struct enc424j600_net *priv)
+{
+ unsigned long timeout = jiffies + msec2000_to_jiffies;
+ u16 value;
+ /* 20 msec timeout read */
+ enc424j600_phy_read(priv, PHSTAT1, &value);
+ while ((value & ANDONE) == 0) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", PHSTAT1);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_phy_read(priv, PHSTAT1, &value);
+ }
+ return 0;
+
+}
+
+/*
+ * Reset and initialize the chip, but don't enable interrupts and don't
+ * start receiving yet.
+ */
+static int enc424j600_hw_init(struct enc424j600_net *priv)
+{
+ u8 eidledl;
+ u16 phcon1;
+ u16 macon2;
+ u16 econ1l;
+ /*priv->autoneg = AUTONEG_ENABLE;*/
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
+ priv->
+ autoneg ? "Autoneg" : (priv->full_duplex ? "FullDuplex" :
+ "HalfDuplex"));
+
+ mutex_lock(&priv->lock);
+
+ priv->bank = 0;
+ priv->hw_enable = false;
+ priv->tx_retry_count = 0;
+ priv->max_pk_counter = 0;
+ priv->rxfilter = RXFILTER_NORMAL;
+
+ if (enc424j600_soft_reset(priv) != 0)
+ return 0;
+
+ /*
+ * Check the device id and silicon revision id.
+ */
+ enc424j600_read_8b_sfr(priv, EIDLEDL, &eidledl);
+
+ if ((eidledl & DEVID_MASK) >> DEVID_SHIFT != ENC424J600_DEV_ID) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() Invalid device ID: %d\n", __func__,
+ (eidledl & DEVID_MASK) >> DEVID_SHIFT);
+ return 0;
+ }
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME ": Silicon revision ID: 0x%02x\n",
+ (eidledl & REVID_MASK) >> REVID_SHIFT);
+
+ enc424j600_write_16b_sfr(priv, ETXSTL, TXSTART);
+ enc424j600_write_16b_sfr(priv, ERXSTL, RXSTART);
+
+ priv->next_pk_ptr = RXSTART;
+ enc424j600_write_16b_sfr(priv, ERXTAILL, SRAMSIZE - 2);
+ enc424j600_write_16b_sfr(priv, ERXFCONL, UCEN | BCEN | CRCEN | RUNTEN);
+
+ enc424j600_phy_write(priv, PHANA, PHANA_DEFAULT);
+
+ /* PHCON1 */
+ phcon1 = 0;
+ if (priv->autoneg) {
+ /* Enable autonegotiation and renegotiate */
+ phcon1 |= ANEN | RENEG;
+ } else {
+ if (priv->speed100)
+ phcon1 |= SPD100;
+ if (priv->full_duplex)
+ phcon1 |= PFULDPX;
+ }
+ enc424j600_phy_write(priv, PHCON1, phcon1);
+
+ /* MACON2
+ * defer transmission if collision occurs (only for half duplex)
+ * pad to 60 or 64 bytes and append CRC
+ * enable receiving huge frames (instead of limiting packet size) */
+ macon2 = MACON2_DEFER | PADCFG2 | PADCFG0 | TXCRCEN | HFRMEN;
+
+ /* If autonegotiation is enabled, we have to wait untill it finishes
+ * and set the PHYDPX bit in MACON2 correctly */
+ if (priv->autoneg) {
+ u8 estath;
+ if (!enc424j600_wait_for_autoneg(priv)) {
+ /* read the PHYDPX bit in ESTAT and set FULDPX in
+ MACON2 accordingly */
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ if (estath & PHYDPX)
+ macon2 |= FULDPX;
+ } else /*if timedout, just disable autoneg */
+ priv->autoneg = AUTONEG_DISABLE;
+ } else if (priv->full_duplex)
+ macon2 |= FULDPX;
+
+ enc424j600_write_16b_sfr(priv, MACON2L, macon2);
+
+ /* MAIPGL
+ * Recomended values for inter packet gaps */
+ if (!priv->autoneg) {
+ enc424j600_write_16b_sfr(priv, MAIPGL,
+ MAIPGL_VAL | (MAIPGH_VAL << 8));
+ }
+
+ /*
+ * Select enabled interrupts, but don't set the global
+ * interrupt enable flag.
+ */
+
+ enc424j600_write_16b_sfr(priv, EIEL,
+ LINKIE << 8 | PKTIE | DMAIE | TXIE | TXABTIE |
+ RXABTIE);
+
+ enc424j600_read_16b_sfr(priv, ECON1L, &econ1l);
+ econ1l |= (RXEN);
+ enc424j600_write_16b_sfr(priv, ECON1L, econ1l);
+
+ mutex_unlock(&priv->lock);
+
+ if (netif_msg_hw(priv))
+ enc424j600_dump_regs(priv, "Hw initialized.");
+
+ return 1;
+}
+
+static void enc424j600_hw_enable(struct enc424j600_net *priv)
+{
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
+ __func__);
+
+ mutex_lock(&priv->lock);
+
+ /* Clear any pending interrupts */
+ enc424j600_write_16b_sfr(priv, EIRL, 0);
+
+ /* Enable global interrupt flag */
+ enc424j600_set_bits(priv, EIEH, INTIE);
+
+ /* enable receive logic */
+ enc424j600_set_bits(priv, ECON1L, RXEN);
+ priv->hw_enable = true;
+ mutex_unlock(&priv->lock);
+}
+
+static void enc424j600_hw_disable(struct enc424j600_net *priv)
+{
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() disabling interrupts.\n",
+ __func__);
+
+ mutex_lock(&priv->lock);
+
+ /* disable receive logic */
+ enc424j600_clear_bits(priv, ECON1L, RXEN);
+
+ /* Disable global interrupt flag */
+ enc424j600_clear_bits(priv, EIEH, INTIE);
+
+ priv->hw_enable = false;
+
+ mutex_unlock(&priv->lock);
+}
+
+static int
+enc424j600_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ int ret = 0;
+ if (!priv->hw_enable) {
+ /* link is in low power mode now; duplex setting
+ * will take effect on next enc424j600_hw_init().
+ */
+ if (speed == SPEED_10 || speed == SPEED_100) {
+ priv->autoneg = (autoneg == AUTONEG_ENABLE);
+ priv->full_duplex = (duplex == DUPLEX_FULL);
+ priv->speed100 = (speed == SPEED_100);
+ } else {
+ if (netif_msg_link(priv))
+ dev_warn(&ndev->dev,
+ "unsupported link setting\n");
+ /*speeds other than SPEED_10 and SPEED_100 */
+ /*are not supported by chip */
+ ret = -EOPNOTSUPP;
+ }
+ } else {
+ if (netif_msg_link(priv))
+ dev_warn(&ndev->dev, "Warning: hw must be disabled "
+ "to set link mode\n");
+ ret = -EBUSY;
+ }
+ return ret;
+}
+
+/*
+ * Receive Status vector
+ */
+static void enc424j600_dump_rsv(struct enc424j600_net *priv, const char *msg,
+ u16 pk_ptr, int len, u16 sts)
+{
+ printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
+ msg, pk_ptr);
+ printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
+ RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
+ printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
+ " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
+ RSV_GETBIT(sts, RSV_CRCERROR),
+ RSV_GETBIT(sts, RSV_LENCHECKERR),
+ RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
+ printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
+ "LongDropEvent: %d, CarrierEvent: %d\n",
+ RSV_GETBIT(sts, RSV_RXMULTICAST),
+ RSV_GETBIT(sts, RSV_RXBROADCAST),
+ RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
+ RSV_GETBIT(sts, RSV_CARRIEREV));
+ printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
+ " UnknownOp: %d, VLanTagFrame: %d\n",
+ RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
+ RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
+ RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
+ RSV_GETBIT(sts, RSV_RXTYPEVLAN));
+}
+
+static void dump_packet(const char *msg, int len, const char *data)
+{
+
+ printk(KERN_ALERT ": %s - packet len:%d\n", msg, len);
+ print_hex_dump(KERN_ALERT, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
+ data, len, true);
+}
+
+/*
+ * Calculate wrap around when reading beyond the end of the RX buffer
+ */
+static u16 rx_packet_start(u16 ptr)
+{
+ if (ptr + RSV_SIZE > RXEND_INIT)
+ return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART + 1);
+ else
+ return ptr + RSV_SIZE;
+}
+
+/*
+ * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
+ */
+static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
+{
+ u16 erxrdpt;
+ if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
+ erxrdpt = end;
+ else
+ erxrdpt = next_packet_ptr - 1;
+
+ return erxrdpt;
+}
+
+static void nolock_rxfifo_init(struct enc424j600_net *priv, u16 start, u16 end)
+{
+ u16 erxrdpt;
+ if (start > 0x5FFF || end > 0x5FFF || start > end) {
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
+ "bad parameters!\n", __func__, start, end);
+ return;
+ }
+ /* set receive buffer start + end */
+ priv->next_pk_ptr = start;
+ enc424j600_write_16b_sfr(priv, ERXSTL, start);
+ erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
+ enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
+ enc424j600_write_16b_sfr(priv, ERXTAILL, end);
+}
+
+/*
+ * Hardware receive function.
+ * Read the buffer memory, update the FIFO pointer to free the buffer,
+ * check the status vector and decrement the packet counter.
+ */
+static void enc424j600_hw_rx(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ struct sk_buff *skb = NULL;
+ u16 erxrdpt, next_packet, rxstat;
+ u8 pkcnt;
+ u16 head, tail;
+ u8 rsv[RSV_SIZE];
+ u16 newrxtail;
+ int len;
+
+ if (netif_msg_rx_status(priv))
+ printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
+ priv->next_pk_ptr);
+ if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev,
+ "%s() Invalid packet address!! 0x%04x\n",
+ __func__, priv->next_pk_ptr);
+ mutex_lock(&priv->lock);
+ enc424j600_clear_bits(priv, ECON1L, RXEN);
+ enc424j600_set_bits(priv, ECON2L, RXRST);
+ enc424j600_clear_bits(priv, ECON2L, RXRST);
+ nolock_rxfifo_init(priv, RXSTART, RXEND_INIT);
+ enc424j600_clear_bits(priv, EIRL, RXABTIF);
+ enc424j600_set_bits(priv, ECON1L, RXEN);
+ mutex_unlock(&priv->lock);
+ ndev->stats.rx_errors++;
+ return;
+ }
+
+ /* Read next packet pointer and rx status vector */
+ enc424j600_read_sram(priv, rsv, sizeof(rsv), priv->next_pk_ptr,
+ RXWINDOW);
+
+ next_packet = rsv[1];
+ next_packet <<= 8;
+ next_packet |= rsv[0];
+
+ len = rsv[3];
+ len <<= 8;
+ len |= rsv[2];
+
+ rxstat = rsv[5];
+ rxstat <<= 8;
+ rxstat |= rsv[4];
+
+ if (netif_msg_rx_status(priv))
+ enc424j600_dump_rsv(priv, __func__, next_packet, len, rxstat);
+
+ if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
+ ndev->stats.rx_errors++;
+ if (RSV_GETBIT(rxstat, RSV_CRCERROR))
+ ndev->stats.rx_crc_errors++;
+ if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
+ ndev->stats.rx_frame_errors++;
+ if (len > MAX_FRAMELEN)
+ ndev->stats.rx_over_errors++;
+ } else {
+ skb = dev_alloc_skb(len + NET_IP_ALIGN);
+ if (!skb) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev,
+ "out of memory for Rx'd frame\n");
+ ndev->stats.rx_dropped++;
+ } else {
+ skb->dev = ndev;
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ /* copy the packet from the receive buffer */
+ enc424j600_read_sram(priv, skb_put(skb, len), len,
+ rx_packet_start(priv->next_pk_ptr),
+ RXWINDOW);
+
+ if (netif_msg_pktdata(priv))
+ dump_packet(__func__, skb->len, skb->data);
+ skb->protocol = eth_type_trans(skb, ndev);
+ /* update statistics */
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += len;
+ netif_rx_ni(skb);
+ }
+ }
+ newrxtail = next_packet - 2;
+ if (next_packet == RXSTART)
+ newrxtail = SRAMSIZE - 2;
+
+ enc424j600_write_16b_sfr(priv, ERXTAILL, newrxtail);
+ /*
+ * Move the RX read pointer to the start of the next
+ * received packet.
+ * This frees the memory we just read out
+ */
+ erxrdpt = erxrdpt_workaround(next_packet, RXSTART, RXEND_INIT);
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n", __func__,
+ erxrdpt);
+
+ /*TODO: remove mutex_lock wherever not required*/
+ mutex_lock(&priv->lock);
+ enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
+
+ priv->next_pk_ptr = next_packet;
+ enc424j600_read_8b_sfr(priv, ESTATL, &pkcnt);
+ enc424j600_read_16b_sfr(priv, ERXHEADL, &head);
+ enc424j600_read_16b_sfr(priv, ERXTAILL, &tail);
+ /* we are done with this packet, decrement the packet counter */
+ enc424j600_set_bits(priv, ECON1H, PKTDEC);
+
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * Access the PHY to determine link status
+ */
+static void enc424j600_check_link_status(struct enc424j600_net *priv)
+{
+ u8 estath;
+ u16 macon2;
+
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ if (estath & PHYLNK) {
+ if (priv->autoneg) {
+ if (!enc424j600_wait_for_autoneg(priv)) {
+ if (estath & PHYDPX) {
+ printk(KERN_ALERT "Full Duplex");
+ enc424j600_read_16b_sfr(priv, MACON2L,
+ &macon2);
+ macon2 |= FULDPX;
+ enc424j600_write_16b_sfr(priv, MACON2L,
+ macon2);
+ }
+ } else /*if timed out, disable autoneg and continue */
+ priv->autoneg = AUTONEG_DISABLE;
+ }
+ netif_carrier_on(priv->netdev);
+ if (netif_msg_ifup(priv))
+ dev_info(&(priv->netdev->dev), "link up\n");
+ } else {
+ if (netif_msg_ifdown(priv))
+ dev_info(&(priv->netdev->dev), "link down\n");
+ netif_carrier_off(priv->netdev);
+ }
+}
+
+static void enc424j600_tx_clear(struct enc424j600_net *priv, bool err)
+{
+ struct net_device *ndev = priv->netdev;
+ if (err)
+ ndev->stats.tx_errors++;
+ else
+ ndev->stats.tx_packets++;
+
+ if (priv->tx_skb) {
+ if (!err)
+ ndev->stats.tx_bytes += priv->tx_skb->len;
+ dev_kfree_skb(priv->tx_skb);
+ priv->tx_skb = NULL;
+ }
+
+ netif_wake_queue(ndev);
+}
+
+static int enc424j600_int_rx_abbort_handler(struct enc424j600_net *priv,
+ int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intRXAbt(%d)\n", loop);
+ mutex_lock(&priv->lock);
+ priv->netdev->stats.rx_dropped++;
+ enc424j600_clear_bits(priv, EIRL, RXABTIF);
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_link_handler(struct enc424j600_net *priv, int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intLINK(%d)\n", loop);
+
+ /* we check more than is necessary here --
+ * only PHYLNK would be needed. */
+ enc424j600_check_link_status(priv);
+
+ return loop;
+}
+
+static int enc424j600_int_tx_handler(struct enc424j600_net *priv, int loop)
+{
+ loop++;
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intTX(%d)\n", loop);
+
+ mutex_lock(&priv->lock);
+ enc424j600_tx_clear(priv, false);
+ enc424j600_clear_bits(priv, EIRL, TXIF);
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_tx_err_handler(struct enc424j600_net *priv, int loop)
+{
+ u8 etxstat;
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intTXErr(%d)\n", loop);
+
+ mutex_lock(&priv->lock);
+
+ enc424j600_read_8b_sfr(priv, ETXSTATH, &etxstat);
+
+ if (etxstat & LATECOL) {
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": Late collision TXErr (%d)\n",
+ priv->tx_retry_count);
+ if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
+ enc424j600_set_bits(priv, ECON1L, TXRTS);
+ else
+ enc424j600_tx_clear(priv, true);
+ } else if (etxstat & MAXCOL) {
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG DRV_NAME ": Max collisions TXErr\n");
+ enc424j600_tx_clear(priv, true);
+ } else {
+ enc424j600_tx_clear(priv, true);
+ }
+
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_received_packet_handler(struct enc424j600_net *priv)
+{
+ uint8_t pk_counter;
+ int ret;
+
+ enc424j600_read_8b_sfr(priv, ESTATL, &pk_counter);
+ if (pk_counter && netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
+ if (pk_counter > priv->max_pk_counter) {
+ /* update statistics */
+ priv->max_pk_counter = pk_counter;
+ if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
+ printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
+ priv->max_pk_counter);
+ }
+ ret = pk_counter;
+ while (pk_counter-- > 0)
+ enc424j600_hw_rx(priv->netdev);
+ return ret;
+}
+
+static void enc424j600_irq_work_handler(struct work_struct *work)
+{
+
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, irq_work);
+ int loop;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ /* disable further interrupts */
+ enc424j600_clear_bits(priv, EIEH, INTIE);
+
+ do {
+ u16 intflags;
+ enc424j600_read_16b_sfr(priv, EIRL, &intflags);
+ loop = 0;
+
+ /* LINK changed handler */
+ if ((intflags & LINKIF) != 0)
+ loop = enc424j600_int_link_handler(priv, loop);
+
+ /* TX complete handler */
+ if ((intflags & TXIF) != 0)
+ loop = enc424j600_int_tx_handler(priv, loop);
+
+ /* TX Error handler */
+ if ((intflags & TXABTIF) != 0) {
+ printk(KERN_ALERT "ABORTING TRANSMITTING PACKET");
+ loop = enc424j600_int_tx_err_handler(priv, loop);
+ }
+ /* RX Error handler */
+ if ((intflags & RXABTIF) != 0) {
+ printk(KERN_ALERT "ABORTING RECEIVED PACKET");
+ loop = enc424j600_int_rx_abbort_handler(priv, loop);
+ }
+ /* RX handler */
+ if ((intflags & PKTIF) != 0)
+ loop = enc424j600_int_received_packet_handler(priv);
+ enc424j600_clear_bits(priv, EIRL, intflags && 0xff);
+ enc424j600_clear_bits(priv, EIRH, intflags >> 8);
+ } while (loop);
+ /* re-enable interrupts */
+ enc424j600_set_bits(priv, EIEH, INTIE);
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
+}
+
+void locked_reg_bfset(struct enc424j600_net *priv, u8 addr, u8 mask)
+{
+ mutex_lock(&priv->lock);
+ enc424j600_set_bits(priv, addr, mask);
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * Hardware transmit function.
+ * Fill the buffer memory and send the contents of the transmit buffer
+ * onto the network
+ */
+static void enc424j600_hw_tx(struct enc424j600_net *priv)
+{
+ if (!priv->tx_skb) {
+ enc424j600_tx_clear(priv, false);
+ return;
+ }
+
+ if (netif_msg_tx_queued(priv))
+ printk(KERN_DEBUG DRV_NAME ": Tx Packet Len:%d\n",
+ priv->tx_skb->len);
+
+ if (netif_msg_pktdata(priv))
+ dump_packet(__func__, priv->tx_skb->len, priv->tx_skb->data);
+
+ enc424j600_write_sram(priv, priv->tx_skb->data, priv->tx_skb->len,
+ TXSTART, GPWINDOW);
+
+ /* Set the tx pointer to start of general purpose SRAM area */
+ enc424j600_write_16b_sfr(priv, ETXSTL, TXSTART);
+
+ /* Write the transfer length */
+ enc424j600_write_16b_sfr(priv, ETXLENL, priv->tx_skb->len);
+
+ /* set TX request flag */
+ locked_reg_bfset(priv, ECON1L, TXRTS);
+}
+
+static int enc424j600_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+ if (netif_msg_tx_queued(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ /* If some error occurs while trying to transmit this
+ * packet, you should return '1' from this function.
+ * In such a case you _may not_ do anything to the
+ * SKB, it is still owned by the network queueing
+ * layer when an error is returned. This means you
+ * may not modify any SKB fields, you may not free
+ * the SKB, etc.
+ */
+ netif_stop_queue(dev);
+
+ /* save the timestamp */
+ priv->netdev->trans_start = jiffies;
+ /* Remember the skb for deferred processing */
+ priv->tx_skb = skb;
+ schedule_work(&priv->tx_work);
+
+ return NETDEV_TX_OK;
+}
+
+static void enc424j600_tx_work_handler(struct work_struct *work)
+{
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, tx_work);
+
+ /* actual delivery of data */
+ enc424j600_hw_tx(priv);
+}
+
+static irqreturn_t enc424j600_irq(int irq, void *dev_id)
+{
+ struct enc424j600_net *priv = dev_id;
+ /*
+ * Can't do anything in interrupt context because we need to
+ * block (spi_sync() is blocking) so fire of the interrupt
+ * handling workqueue.
+ * Remember that we access enc424j600 registers through SPI bus
+ * via spi_sync() call.
+ */
+ schedule_work(&priv->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void enc424j600_tx_timeout(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+
+ if (netif_msg_timer(priv))
+ dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
+
+ ndev->stats.tx_errors++;
+ /* can't restart safely under softirq */
+ schedule_work(&priv->restart_work);
+}
+
+/*
+ * Open/initialize the board. This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+static int enc424j600_net_open(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ if (netif_msg_ifup(priv))
+ dev_err(&dev->dev, "invalid MAC address %pM\n",
+ dev->dev_addr);
+ return -EADDRNOTAVAIL;
+ }
+ /* Reset the hardware here (and take it out of low power mode) */
+ enc424j600_lowpower(priv, false);
+ enc424j600_hw_disable(priv);
+ if (!enc424j600_hw_init(priv)) {
+ if (netif_msg_ifup(priv))
+ dev_err(&dev->dev, "hw_reset() failed\n");
+ return -EINVAL;
+ }
+ /* Update the MAC address (in case user has changed it) */
+ enc424j600_set_hw_macaddr(dev);
+ /* Enable interrupts */
+ enc424j600_hw_enable(priv);
+ /* check link status */
+ enc424j600_check_link_status(priv);
+ /* We are now ready to accept transmit requests from
+ * the queueing layer of the networking.
+ */
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/* The inverse routine to net_open(). */
+static int enc424j600_net_close(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ enc424j600_hw_disable(priv);
+ enc424j600_lowpower(priv, true);
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+/*
+ * Set or clear the multicast filter for this adapter
+ * num_addrs == -1 Promiscuous mode, receive all packets
+ * num_addrs == 0 Normal mode, filter out multicast packets
+ * num_addrs > 0 Multicast mode, receive normal and MC packets
+ */
+static void enc424j600_set_multicast_list(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+ int oldfilter = priv->rxfilter;
+
+ if (dev->flags & IFF_PROMISC) {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "promiscuous mode\n");
+ priv->rxfilter = RXFILTER_PROMISC;
+ } else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "%smulticast mode\n",
+ (dev->flags & IFF_ALLMULTI) ? "all-" : "");
+ priv->rxfilter = RXFILTER_MULTI;
+ } else {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "normal mode\n");
+ priv->rxfilter = RXFILTER_NORMAL;
+ }
+
+ if (oldfilter != priv->rxfilter)
+ schedule_work(&priv->setrx_work);
+}
+
+void locked_regb_write(struct enc424j600_net *priv, u8 address, u8 data)
+{
+ mutex_lock(&priv->lock);
+ enc424j600_write_8b_sfr(priv, address, data);
+ mutex_unlock(&priv->lock);
+}
+
+static void enc424j600_setrx_work_handler(struct work_struct *work)
+{
+ u16 macon1;
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, setrx_work);
+
+ if (priv->rxfilter == RXFILTER_PROMISC) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
+ enc424j600_read_16b_sfr(priv, MACON1L, &macon1);
+ macon1 = macon1 | PASSALL;
+ enc424j600_write_16b_sfr(priv, MACON1L, macon1);
+ locked_regb_write(priv, ERXFCONL, UCEN | MCEN | NOTMEEN);
+ } else if (priv->rxfilter == RXFILTER_MULTI) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
+ locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN | MCEN);
+
+ } else {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": normal mode\n");
+ locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN);
+
+ }
+}
+
+static void enc424j600_restart_work_handler(struct work_struct *work)
+{
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, restart_work);
+ struct net_device *ndev = priv->netdev;
+ int ret;
+
+ rtnl_lock();
+ if (netif_running(ndev)) {
+ enc424j600_net_close(ndev);
+ ret = enc424j600_net_open(ndev);
+ if (unlikely(ret)) {
+ dev_info(&ndev->dev, " could not restart %d\n", ret);
+ dev_close(ndev);
+ }
+ }
+ rtnl_unlock();
+}
+
+/* ......................... ETHTOOL SUPPORT ........................... */
+
+static void
+enc424j600_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+ strlcpy(info->bus_info,
+ dev_name(dev->dev.parent), sizeof(info->bus_info));
+}
+
+static int
+enc424j600_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->supported = SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_TP;
+
+ cmd->speed = priv->speed100 ? SPEED_100 : SPEED_10;
+ cmd->duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
+ cmd->port = PORT_TP;
+ cmd->autoneg = priv->autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+ return 0;
+}
+
+static int
+enc424j600_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ return enc424j600_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
+}
+
+static u32 enc424j600_get_msglevel(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ return priv->msg_enable;
+}
+
+static void enc424j600_set_msglevel(struct net_device *dev, u32 val)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ priv->msg_enable = val;
+}
+
+static const struct ethtool_ops enc424j600_ethtool_ops = {
+ .get_settings = enc424j600_get_settings,
+ .set_settings = enc424j600_set_settings,
+ .get_drvinfo = enc424j600_get_drvinfo,
+ .get_msglevel = enc424j600_get_msglevel,
+ .set_msglevel = enc424j600_set_msglevel,
+};
+
+static int enc424j600_chipset_init(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ enc424j600_get_hw_macaddr(dev);
+ return enc424j600_hw_init(priv);
+
+}
+
+static const struct net_device_ops enc424j600_netdev_ops = {
+ .ndo_open = enc424j600_net_open,
+ .ndo_stop = enc424j600_net_close,
+ .ndo_start_xmit = enc424j600_send_packet,
+ .ndo_set_multicast_list = enc424j600_set_multicast_list,
+ .ndo_set_mac_address = enc424j600_set_mac_address,
+ .ndo_tx_timeout = enc424j600_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int __devinit enc424j600_probe(struct spi_device *spi)
+{
+ struct net_device *dev;
+ struct enc424j600_net *priv;
+ int ret = 0;
+
+ if (netif_msg_drv(&debug))
+ dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
+ DRV_VERSION);
+
+ dev = alloc_etherdev(sizeof(struct enc424j600_net));
+ if (!dev) {
+ if (netif_msg_drv(&debug))
+ dev_err(&spi->dev, DRV_NAME
+ ": unable to alloc new ethernet\n");
+ ret = -ENOMEM;
+ goto error_alloc;
+ }
+ priv = netdev_priv(dev);
+
+ priv->netdev = dev; /* priv to netdev reference */
+ priv->spi = spi; /* priv to spi reference */
+ priv->msg_enable = netif_msg_init(debug.msg_enable,
+ ENC424J600_MSG_DEFAULT);
+ mutex_init(&priv->lock);
+ INIT_WORK(&priv->tx_work, enc424j600_tx_work_handler);
+ INIT_WORK(&priv->setrx_work, enc424j600_setrx_work_handler);
+ INIT_WORK(&priv->irq_work, enc424j600_irq_work_handler);
+ INIT_WORK(&priv->restart_work, enc424j600_restart_work_handler);
+ dev_set_drvdata(&spi->dev, priv); /* spi to priv reference */
+ SET_NETDEV_DEV(dev, &spi->dev);
+ /*TODO: chip DMA features to be utilized */
+ /* If requested, allocate DMA buffers */
+ if (enc424j600_enable_dma) {
+ spi->dev.coherent_dma_mask = ~0;
+
+ /*
+ * Minimum coherent DMA allocation is PAGE_SIZE, so allocate
+ * that much and share it between Tx and Rx DMA buffers.
+ */
+#if SPI_TRANSFER_BUF_LEN > PAGE_SIZE / 2
+#error "A problem in DMA buffer allocation"
+#endif
+ priv->spi_tx_buf = dma_alloc_coherent(&spi->dev,
+ PAGE_SIZE,
+ &priv->spi_tx_dma,
+ GFP_DMA);
+
+ if (priv->spi_tx_buf) {
+ priv->spi_rx_buf = (u8 *) (priv->spi_tx_buf +
+ (PAGE_SIZE / 2));
+ priv->spi_rx_dma = (dma_addr_t) (priv->spi_tx_dma +
+ (PAGE_SIZE / 2));
+ } else {
+ /* Fall back to non-DMA */
+ enc424j600_enable_dma = 0;
+ }
+ }
+
+ /* Allocate non-DMA buffers */
+ if (!enc424j600_enable_dma) {
+ priv->spi_tx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_tx_buf) {
+ ret = -ENOMEM;
+ goto error_tx_buf;
+ }
+ priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_rx_buf) {
+ ret = -ENOMEM;
+ goto error_rx_buf;
+ }
+ }
+
+ if (!enc424j600_chipset_init(dev)) {
+ if (netif_msg_probe(priv))
+ dev_info(&spi->dev, DRV_NAME " chip not found\n");
+ ret = -EIO;
+ goto error_irq;
+ }
+
+ /* Board setup must set the relevant edge trigger type;
+ * level triggers won't currently work.
+ */
+ ret = request_irq(spi->irq, enc424j600_irq, 0, DRV_NAME, priv);
+ if (ret < 0) {
+ if (netif_msg_probe(priv))
+ dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
+ "(ret = %d)\n", spi->irq, ret);
+ goto error_irq;
+ }
+
+ dev->if_port = IF_PORT_10BASET;
+ dev->irq = spi->irq;
+ dev->netdev_ops = &enc424j600_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ SET_ETHTOOL_OPS(dev, &enc424j600_ethtool_ops);
+
+ enc424j600_lowpower(priv, true);
+
+ ret = register_netdev(dev);
+ if (ret) {
+ if (netif_msg_probe(priv))
+ dev_err(&spi->dev, "register netdev " DRV_NAME
+ " failed (ret = %d)\n", ret);
+ goto error_register;
+ }
+ dev_info(&dev->dev, DRV_NAME " driver registered\n");
+
+ return 0;
+
+error_register:
+ free_irq(spi->irq, priv);
+error_irq:
+ free_netdev(dev);
+ if (!enc424j600_enable_dma)
+ kfree(priv->spi_rx_buf);
+error_rx_buf:
+ if (!enc424j600_enable_dma)
+ kfree(priv->spi_tx_buf);
+error_tx_buf:
+ if (enc424j600_enable_dma) {
+ dma_free_coherent(&spi->dev, PAGE_SIZE,
+ priv->spi_tx_buf, priv->spi_tx_dma);
+ }
+error_alloc:
+ return ret;
+}
+
+static int __devexit enc424j600_remove(struct spi_device *spi)
+{
+ struct enc424j600_net *priv = dev_get_drvdata(&spi->dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": remove\n");
+
+ unregister_netdev(priv->netdev);
+ free_irq(spi->irq, priv);
+ free_netdev(priv->netdev);
+
+ return 0;
+}
+
+static struct spi_driver enc424j600_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = enc424j600_probe,
+ .remove = __devexit_p(enc424j600_remove),
+};
+
+static int __init enc424j600_init(void)
+{
+ msec20_to_jiffies = msecs_to_jiffies(20);
+ /*autoneg works from 1600ms */
+ msec2000_to_jiffies = msecs_to_jiffies(2000);
+
+ return spi_register_driver(&enc424j600_driver);
+}
+
+module_init(enc424j600_init);
+
+static void __exit enc424j600_exit(void)
+{
+ spi_unregister_driver(&enc424j600_driver);
+}
+
+module_exit(enc424j600_exit);
+
+MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
+MODULE_AUTHOR("Balaji Venkatachalam <balaji.v@thotakaa.com>");
+MODULE_LICENSE("GPL");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");
+module_param(enc424j600_enable_dma, int, S_IRUGO);
+MODULE_PARM_DESC(enc424j600_enable_dma, "Enable SPI DMA. Default: 0 (Off)");
+MODULE_ALIAS("spi:" DRV_NAME);
diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600_hw.h
b/drivers/net/enc424j600_hw.h
--- a/drivers/net/enc424j600_hw.h 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/enc424j600_hw.h 2011-01-05 23:51:24.000000000 +0530
@@ -0,0 +1,460 @@
+/*
+* enc424j600_hw.h: Register definitions
+*
+*/
+
+#ifndef _ENC424J600_HW_H
+#define _ENC424J600_HW_H
+
+/*
+* ENC424J600 Control Registers
+* Control register definitions are a combination of address
+* and bank number
+* - Register address (bits 0-4)
+* - Bank number (bits 5-6)
+*/
+#define ADDR_MASK 0x1F
+#define BANK_MASK 0x60
+#define BANK_SHIFT 5
+
+/* All-bank registers */
+#define EUDASTL 0x16
+#define EUDASTH 0x17
+#define EUDANDL 0x18
+#define EUDANDH 0x19
+#define ESTATL 0x1A
+#define ESTATH 0x1B
+#define EIRL 0x1C
+#define EIRH 0x1D
+#define ECON1L 0x1E
+#define ECON1H 0x1F
+
+/* Bank 0 registers */
+#define ETXSTL (0x00 | 0x00)
+#define ETXSTH (0x01 | 0x00)
+#define ETXLENL (0x02 | 0x00)
+#define ETXLENH (0x03 | 0x00)
+#define ERXSTL (0x04 | 0x00)
+#define ERXSTH (0x05 | 0x00)
+#define ERXTAILL (0x06 | 0x00)
+#define ERXTAILH (0x07 | 0x00)
+#define ERXHEADL (0x08 | 0x00)
+#define ERXHEADH (0x09 | 0x00)
+#define EDMASTL (0x0A | 0x00)
+#define EDMASTH (0x0B | 0x00)
+#define EDMALENL (0x0C | 0x00)
+#define EDMALENH (0x0D | 0x00)
+#define EDMADSTL (0x0E | 0x00)
+#define EDMADSTH (0x0F | 0x00)
+#define EDMACSL (0x10 | 0x00)
+#define EDMACSH (0x11 | 0x00)
+#define ETXSTATL (0x12 | 0x00)
+#define ETXSTATH (0x13 | 0x00)
+#define ETXWIREL (0x14 | 0x00)
+#define ETXWIREH (0x15 | 0x00)
+
+/* Bank 1 registers */
+#define EHT1L (0x00 | 0x20)
+#define EHT1H (0x01 | 0x20)
+#define EHT2L (0x02 | 0x20)
+#define EHT2H (0x03 | 0x20)
+#define EHT3L (0x04 | 0x20)
+#define EHT3H (0x05 | 0x20)
+#define EHT4L (0x06 | 0x20)
+#define EHT4H (0x07 | 0x20)
+#define EPMM1L (0x08 | 0x20)
+#define EPMM1H (0x09 | 0x20)
+#define EPMM2L (0x0A | 0x20)
+#define EPMM2H (0x0B | 0x20)
+#define EPMM3L (0x0C | 0x20)
+#define EPMM3H (0x0D | 0x20)
+#define EPMM4L (0x0E | 0x20)
+#define EPMM4H (0x0F | 0x20)
+#define EPMCSL (0x10 | 0x20)
+#define EPMCSH (0x11 | 0x20)
+#define EPMOL (0x12 | 0x20)
+#define EPMOH (0x13 | 0x20)
+#define ERXFCONL (0x14 | 0x20)
+#define ERXFCONH (0x15 | 0x20)
+
+/* Bank 2 registers */
+#define MACON1L (0x00 | 0x40)
+#define MACON1H (0x01 | 0x40)
+#define MACON2L (0x02 | 0x40)
+#define MACON2H (0x03 | 0x40)
+#define MABBIPGL (0x04 | 0x40)
+#define MABBIPGH (0x05 | 0x40)
+#define MAIPGL (0x06 | 0x40)
+#define MAIPGH (0x07 | 0x40)
+#define MACLCONL (0x08 | 0x40)
+#define MACLCONH (0x09 | 0x40)
+#define MAMXFLL (0x0A | 0x40)
+#define MAMXFLH (0x0B | 0x40)
+#define MICMDL (0x12 | 0x40)
+#define MICMDH (0x13 | 0x40)
+#define MIREGADRL (0x14 | 0x40)
+#define MIREGADRH (0x15 | 0x40)
+
+/* Bank 3 registers */
+#define MAADR3L (0x00 | 0x60)
+#define MAADR3H (0x01 | 0x60)
+#define MAADR2L (0x02 | 0x60)
+#define MAADR2H (0x03 | 0x60)
+#define MAADR1L (0x04 | 0x60)
+#define MAADR1H (0x05 | 0x60)
+#define MIWRL (0x06 | 0x60)
+#define MIWRH (0x07 | 0x60)
+#define MIRDL (0x08 | 0x60)
+#define MIRDH (0x09 | 0x60)
+#define MISTATL (0x0A | 0x60)
+#define MISTATH (0x0B | 0x60)
+#define EPAUSL (0x0C | 0x60)
+#define EPAUSH (0x0D | 0x60)
+#define ECON2L (0x0E | 0x60)
+#define ECON2H (0x0F | 0x60)
+#define ERXWML (0x10 | 0x60)
+#define ERXWMH (0x11 | 0x60)
+#define EIEL (0x12 | 0x60)
+#define EIEH (0x13 | 0x60)
+#define EIDLEDL (0x14 | 0x60)
+#define EIDLEDH (0x15 | 0x60)
+
+/* Unbanked registers */
+#define EGPDATA (0x00 | 0x80)
+#define ERXDATA (0x02 | 0x80)
+#define EUDADATA (0x04 | 0x80)
+#define EGPRDPTL (0x06 | 0x80)
+#define EGPRDPTH (0x07 | 0x80)
+#define EGPWRPTL (0x08 | 0x80)
+#define EGPWRPTH (0x09 | 0x80)
+#define ERXRDPTL (0x0A | 0x80)
+#define ERXRDPTH (0x0B | 0x80)
+#define ERXWRPTL (0x0C | 0x80)
+#define ERXWRPTH (0x0D | 0x80)
+#define EUDARDPTL (0x0E | 0x80)
+#define EUDARDPTH (0x0F | 0x80)
+#define EUDAWRPTL (0x10 | 0x80)
+#define EUDAWRPTH (0x11 | 0x80)
+
+/* PHY registers */
+#define PHCON1 0x00
+#define PHSTAT1 0x01
+#define PHANA 0x04
+#define PHANLPA 0x05
+#define PHANE 0x06
+#define PHCON2 0x11
+#define PHSTAT2 0x1B
+#define PHSTAT3 0x1F
+
+/* Single-byte instructions */
+#define BXSEL(bank) (0xC0 + (bank & (BANK_MASK >> BANK_SHIFT)) * 2)
+/* Bank X Select */
+#define B0SEL 0xC0 /* Bank 0 Select */
+#define B1SEL 0xC2 /* Bank 1 Select */
+#define B2SEL 0xC4 /* Bank 2 Select */
+#define B3SEL 0xC6 /* Bank 3 Select */
+#define SETETHRST 0xCA /* System Reset */
+#define FCDISABLE 0xE0 /* Flow Control Disable */
+#define FCSINGLE 0xE2 /* Flow Control Single */
+#define FCMULTIPLE 0xE4 /* Flow Control Multiple */
+#define FCCLEAR 0xE6 /* Flow Control Clear */
+#define SETPKTDEC 0xCC /* Decrement Packet Counter */
+#define DMASTOP 0xD2 /* DMA Stop */
+#define DMACKSUM 0xD8 /* DMA Start Checksum */
+#define DMACKSUMS 0xDA /* DMA Start Checksum with Seed */
+#define DMACOPY 0xDC /* DMA Start Copy */
+#define DMACOPYS 0xDE /* DMA Start Copy and Checksum with Seed */
+#define SETTXRTS 0xD4 /* Request Packet Transmission */
+#define ENABLERX 0xE8 /* Enable RX */
+#define DISABLERX 0xEA /* Disable RX */
+#define SETEIE 0xEC /* Enable Interrupts */
+#define CLREIE 0xEE /* Disable Interrupts */
+
+/* Two byte instructions */
+#define RBSEL 0xC8 /* Read Bank Select */
+
+/* Three byte instructions */
+#define WGPRDPT 0x60 /* Write EGPRDPT */
+#define RGPRDPT 0x62 /* Read EGPRDPT */
+#define WRXRDPT 0x64 /* Write ERXRDPT */
+#define RRXRDPT 0x66 /* Read ERXRDPT */
+#define WUDARDPT 0x68 /* Write EUDARDPT */
+#define RUDARDPT 0x6A /* Read EUDARDPT */
+#define WGPWRPT 0x6C /* Write EGPWRPT */
+#define RGPWRPT 0x6E /* Read EGPWRPT */
+#define WRXWRPT 0x70 /* Write ERXWRPT */
+#define RRXWRPT 0x72 /* Read ERXWRPT */
+#define WUDAWRPT 0x74 /* Write EUDAWRPT */
+#define RUDAWRPT 0x76 /* Read EUDAWRPT */
+
+/* n byte instructions */
+#define RCR(addr) (0x00 | (addr & ADDR_MASK)) /* Read Control Register */
+#define WCR(addr) (0x40 | (addr & ADDR_MASK)) /* Write Control Register */
+#define RCRU 0x20 /* Read Control Register Unbanked */
+#define WCRU 0x22 /* Write Control Register Unbanked */
+#define BFS(addr) (0x80 | (addr & ADDR_MASK)) /* Bit Field Set */
+#define BFC(addr) (0xA0 | (addr & ADDR_MASK)) /* Bit Field Clear */
+#define BFSU 0x24 /* Bit Field Set Unbanked */
+#define BFCU 0x26 /* Bit Field Clear Unbanked */
+#define RGPDATA 0x28 /* Read EGPDATA */
+#define WGPDATA 0x2A /* Write EGPDATA */
+#define RRXDATA 0x2C /* Read ERXDATA */
+#define WRXDATA 0x2E /* Write ERXDATA */
+#define RUDADATA 0x30 /* Read EUDADATA */
+#define WUDADATA 0x32 /* Write EUDADATA */
+
+/* Register bit definitions */
+/* ESTATH */
+#define INT (1 << 7)
+#define FCIDLE (1 << 6)
+#define RXBUSY (1 << 5)
+#define CLKRDY (1 << 4)
+#define PHYDPX (1 << 2)
+#define PHYLNK (1 << 0)
+
+/* EIRH */
+/*for ease of use lets access it as a word*/
+#define CRYPTEN (1 << 15)
+#define MODEXIF (1 << 14)
+#define HASHIF (1 << 13)
+#define AESIF (1 << 12)
+#define LINKIF (1 << 11)
+
+/* EIRL */
+#define PKTIF (1 << 6)
+#define DMAIF (1 << 5)
+#define TXIF (1 << 3)
+#define TXABTIF (1 << 2)
+#define RXABTIF (1 << 1)
+#define PCFULIF (1 << 0)
+
+/* ECON1H */
+#define MODEXST (1 << 7)
+#define HASHEN (1 << 6)
+#define HASHOP (1 << 5)
+#define HASHLST (1 << 4)
+#define AESST (1 << 3)
+#define AESOP1 (1 << 2)
+#define AESOP0 (1 << 1)
+#define PKTDEC (1 << 0)
+
+/* ECON1L */
+#define FCOP1 (1 << 7)
+#define FCOP0 (1 << 6)
+#define DMAST (1 << 5)
+#define DMACPY (1 << 4)
+#define DMACSSD (1 << 3)
+#define DMANOCS (1 << 2)
+#define TXRTS (1 << 1)
+#define RXEN (1 << 0)
+
+/* ETXSTATH */
+#define LATECOL (1 << 2)
+#define MAXCOL (1 << 1)
+#define EXDEFER (1 << 0)
+
+/* ETXSTATL */
+#define ETXSTATL_DEFER (1 << 7)
+#define CRCBAD (1 << 4)
+#define COLCNT_MASK 0xF
+
+/* ERXFCONH */
+#define HTEN (1 << 7)
+#define MPEN (1 << 6)
+#define NOTPM (1 << 4)
+#define PMEN3 (1 << 3)
+#define PMEN2 (1 << 2)
+#define PMEN1 (1 << 1)
+#define PMEN0 (1 << 0)
+
+/* ERXFCONL */
+#define CRCEEN (1 << 7)
+#define CRCEN (1 << 6)
+#define RUNTEEN (1 << 5)
+#define RUNTEN (1 << 4)
+#define UCEN (1 << 3)
+#define NOTMEEN (1 << 2)
+#define MCEN (1 << 1)
+#define BCEN (1 << 0)
+/*no bytewise access*/
+/* MACON1L */
+#define LOOPBK (1 << 4)
+#define RXPAUS (1 << 2)
+#define PASSALL (1 << 1)
+
+/* MACON2 */
+#define MACON2_DEFER (1 << 14)
+#define BPEN (1 << 13)
+#define NOBKOFF (1 << 12)
+#define PADCFG2 (1 << 7)
+#define PADCFG1 (1 << 6)
+#define PADCFG0 (1 << 5)
+#define TXCRCEN (1 << 4)
+#define PHDREN (1 << 3)
+#define HFRMEN (1 << 2)
+#define FULDPX (1 << 0)
+
+/* MAIPG */
+/* value of the high byte is given by the reserved bits,
+* value of the low byte is recomended setting of the
+* IPG parameter.
+*/
+#define MAIPGH_VAL 0x0C
+#define MAIPGL_VAL 0x12
+
+/* MIREGADRH */
+#define MIREGADRH_VAL 0x01
+
+/* MIREGADRL */
+#define PHREG_MASK 0x1F
+
+/* MICMDL */
+#define MIISCAN (1 << 1)
+#define MIIRD (1 << 0)
+
+/* MISTATL */
+#define NVALID (1 << 2)
+#define SCAN (1 << 1)
+#define BUSY (1 << 0)
+
+/* ECON2H */
+#define ETHEN (1 << 7)
+#define STRCH (1 << 6)
+#define TXMAC (1 << 5)
+#define SHA1MD5 (1 << 4)
+#define COCON3 (1 << 3)
+#define COCON2 (1 << 2)
+#define COCON1 (1 << 1)
+#define COCON0 (1 << 0)
+
+/* ECON2L */
+#define AUTOFC (1 << 7)
+#define TXRST (1 << 6)
+#define RXRST (1 << 5)
+#define ETHRST (1 << 4)
+#define MODLEN1 (1 << 3)
+#define MODLEN0 (1 << 2)
+#define AESLEN1 (1 << 1)
+#define AESLEN0 (1 << 0)
+
+/* EIEH */
+#define INTIE (1 << 7)
+#define MODEXIE (1 << 6)
+#define HASHIE (1 << 5)
+#define AESIE (1 << 4)
+#define LINKIE (1 << 3)
+
+/* EIEL */
+#define PKTIE (1 << 6)
+#define DMAIE (1 << 5)
+#define TXIE (1 << 3)
+#define TXABTIE (1 << 2)
+#define RXABTIE (1 << 1)
+#define PCFULIE (1 << 0)
+
+/* EIDLEDH */
+#define LACFG3 (1 << 7)
+#define LACFG2 (1 << 6)
+#define LACFG1 (1 << 5)
+#define LACFG0 (1 << 4)
+#define LBCFG3 (1 << 3)
+#define LBCFG2 (1 << 2)
+#define LBCFG1 (1 << 1)
+#define LBCFG0 (1 << 0)
+
+/* EIDLEDL */
+#define DEVID_SHIFT 5
+#define DEVID_MASK (0x7 << DEVID_SHIFT)
+#define REVID_SHIFT 0
+#define REVID_MASK (0x1F << REVID_SHIFT)
+
+/* PHANA */
+/* Default value for PHY initialization*/
+#define PHANA_DEFAULT 0x05E1
+
+/* PHCON1 */
+#define PRST (1 << 15)
+#define PLOOPBK (1 << 14)
+#define SPD100 (1 << 13)
+#define ANEN (1 << 12)
+#define PSLEEP (1 << 11)
+#define RENEG (1 << 9)
+#define PFULDPX (1 << 8)
+
+/* PHSTAT */
+#define FULL100 (1 << 14)
+#define HALF100 (1 << 13)
+#define FULL10 (1 << 12)
+#define HALF10 (1 << 11)
+#define ANDONE (1 << 5)
+#define LRFAULT (1 << 4)
+#define ANABLE (1 << 3)
+#define LLSTAT (1 << 2)
+#define EXTREGS (1 << 0)
+
+#define EUDAST_TEST_VAL 0x1234
+
+#define TSV_SIZE 7
+
+#define ENC424J600_DEV_ID 0x1
+
+/* Configuration */
+
+/* Led is on when the link is present and driven low
+* temporarily when packet is TX'd or RX'd */
+#define LED_A_SETTINGS 0xC
+
+/* Led is on if the link is in 100 Mbps mode */
+#define LED_B_SETTINGS 0x8
+
+/* maximum ethernet frame length
+* Currently not used as a limit anywhere
+* (we're using the "huge frame enable" feature of
+* enc424j600). */
+#define MAX_FRAMELEN 1518
+
+/* Size in bytes of the receive buffer in enc424j600.
+* Must be word aligned (even).
+*/
+#define RX_BUFFER_SIZE (15 * MAX_FRAMELEN)
+
+/* Start of the general purpose area in sram */
+#define SRAM_GP_START 0x0
+
+/* SRAM size */
+#define SRAM_SIZE 0x6000
+
+/* Start of the receive buffer */
+#define ERXST_VAL (SRAM_SIZE - RX_BUFFER_SIZE)
+
+#define RSV_RXLONGEVDROPEV 16
+#define RSV_CARRIEREV 18
+#define RSV_CRCERROR 20
+#define RSV_LENCHECKERR 21
+#define RSV_LENOUTOFRANGE 22
+#define RSV_RXOK 23
+#define RSV_RXMULTICAST 24
+#define RSV_RXBROADCAST 25
+#define RSV_DRIBBLENIBBLE 26
+#define RSV_RXCONTROLFRAME 27
+#define RSV_RXPAUSEFRAME 28
+#define RSV_RXUNKNOWNOPCODE 29
+#define RSV_RXTYPEVLAN 30
+
+#define RSV_RUNTFILTERMATCH 31
+#define RSV_NOTMEFILTERMATCH 32
+#define RSV_HASHFILTERMATCH 33
+#define RSV_MAGICPKTFILTERMATCH 34
+#define RSV_PTRNMTCHFILTERMATCH 35
+#define RSV_UNICASTFILTERMATCH 36
+
+#define RSV_SIZE 8
+#define RSV_BITMASK(x) (1 << ((x) - 16))
+#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0)
+
+/* Put RX buffer at 0 as suggested by the Errata datasheet */
+
+#define RXSTART_INIT ERXST_VAL
+#define RXEND_INIT 0x5FFF
+
+#endif
diff -uprN -X a/Documentation/dontdiff a/drivers/net/Kconfig
b/drivers/net/Kconfig
--- a/drivers/net/Kconfig 2010-07-05 22:41:43.000000000 +0530
+++ b/drivers/net/Kconfig 2011-01-16 15:26:16.000000000 +0530
@@ -973,6 +973,16 @@ config ENC28J60_WRITEVERIFY
Enable the verify after the buffer write useful for debugging purpose.
If unsure, say N.
+config ENC424J600
+ tristate "ENC424J600 support"
+ depends on EXPERIMENTAL && SPI && NET_ETHERNET
+ select CRC32
+ ---help---
+ Support for the Microchip EN424J600 ethernet chip.
+
+ To compile this driver as a module, choose M here. The module will be
+ called enc424j600.
+
config ETHOC
tristate "OpenCores 10/100 Mbps Ethernet MAC support"
depends on NET_ETHERNET && HAS_IOMEM
diff -uprN -X a/Documentation/dontdiff a/drivers/net/Makefile
b/drivers/net/Makefile
--- a/drivers/net/Makefile 2010-07-05 22:41:43.000000000 +0530
+++ b/drivers/net/Makefile 2011-01-05 21:46:57.000000000 +0530
@@ -240,6 +240,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_d
pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
+obj-$(CONFIG_ENC424J600) += enc424j600.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
2011-01-29 8:24 ` Balaji Venkatachalam
@ 2011-01-30 10:14 ` Balaji Venkatachalam
2011-01-30 11:55 ` Francois Romieu
0 siblings, 1 reply; 14+ messages in thread
From: Balaji Venkatachalam @ 2011-01-30 10:14 UTC (permalink / raw)
To: romieu
Cc: netdev, mirqus, mohan, blue.cube, lanconelli.claudio, sriram,
David Miller, vbalaji.acs
From: Balaji Venkatachalam <balaji.v@thotakaa.com>
Updated patch [V1.29] for Microchip enc424j600 ethernet chip controlled via SPI.
I tested it on my custom board with ARM9 (Freescale i.MX233) with
Kernel 2.6.31.14.
Changes done since V1.28 to V1.29
1. enc424j600_spi_trans function implementation optimized
2. Unnecessary comments and Improper Comments removed
3. Added an empty line after variable declaration in all functions
4. mapped enc424j600_dump_regs to eth_ops get_regs
5. removed the hardcoding of return type in enc424j600_probe function
Changes done since V1.27 to V1.28
1. did some code formatting at line no 110
Changes done since V1.24 to V1.27
1. Timeout Mechanism implemented for enc424j600_soft_reset function
2. Timeout Mechanism implemented for enc424j600_wait_for_autoneg function
3. Window Naming changed to enum
4. Removed WRITEVERIFY functionality
Todo List:
1. Low Power Mode Functionality implementation
2. Provide Support for On-Chip DMA.
3. Remove mutex_lock wherever not required
Any comments are welcome.
Signed-off-by: Balaji Venkatachalam <balaji.v@thotakaa.com>
---
diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600.c
b/drivers/net/enc424j600.c
--- a/drivers/net/enc424j600.c 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/enc424j600.c 2011-01-30 15:30:09.000000000 +0530
@@ -0,0 +1,1722 @@
+/*
+ * Microchip ENC424J600 ethernet driver (MAC + PHY) on SPI bus
+ *
+ * Copyright (C) 2011 Thotaka Technologies Pvt Ltd
+ * Author: Balaji Venkatachalam <balaji.v@thotakaa.com>
+ * based on enc424j600.c written by Kuba Marek
+ * based on enc28j60.c written by Claudio Lanconelli
+ *
+ * Changes done since V1.28 to V1.29
+ * 1. enc424j600_spi_trans function implementation optimized
+ * 2. Unnecessary comments and Improper Comments removed
+ * 3. Added an empty line after variable declaration in all functions
+ * 4. mapped enc424j600_dump_regs to eth_ops get_regs
+ * 5. removed the hardcoding of return type in enc424j600_probe function
+ *
+ * Changes done since V1.27 to V1.28
+ * 1. did some code formatting
+ *
+ * Changes done since V1.24 to V1.27
+ * 1. Timeout Mechanism implemented for enc424j600_soft_reset function
+ * 2. Timeout Mechanism implemented for enc424j600_wait_for_autoneg function
+ * 3. Window Naming changed to enum
+ * 4. Removed WRITEVERIFY functionality
+ *
+ * Todo List:
+ * 1. Low Power Mode Functionality implementation
+ * 2. Provide Support for On-Chip DMA
+ * 3. Remove mutex_lock wherever not required
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+
+#include "enc424j600_hw.h"
+
+#define DRV_NAME "enc424j600"
+#define DRV_VERSION "1.29"
+
+#define ENC424J600_MSG_DEFAULT \
+ (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
+
+#define SPI_TRANSFER_BUF_LEN (4 + MAX_FRAMELEN)
+#define TX_TIMEOUT (4 * HZ)
+
+/* Max TX retries in case of collision as suggested by errata datasheet */
+#define MAX_TX_RETRYCOUNT 16
+
+#define SPI_OPLEN 1
+
+#define SRAMSIZE 0x6000
+#define TXSTART 0x0000
+#define RXSTART 0x1600
+
+static int enc424j600_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */
+
+enum {
+ RXFILTER_NORMAL,
+ RXFILTER_MULTI,
+ RXFILTER_PROMISC
+};
+enum {
+ RXWINDOW,
+ USERWINDOW,
+ GPWINDOW
+};
+
+/* Driver local data */
+struct enc424j600_net {
+ struct net_device *netdev;
+ struct spi_device *spi;
+ struct mutex lock;
+ struct sk_buff *tx_skb;
+ struct work_struct tx_work;
+ struct work_struct irq_work;
+ struct work_struct setrx_work;
+ struct work_struct restart_work;
+ u8 bank; /* current register bank selected */
+ u16 next_pk_ptr; /* next packet pointer within FIFO */
+ u16 max_pk_counter; /* statistics: max packet counter */
+ u16 tx_retry_count;
+ bool hw_enable;
+ bool full_duplex;
+ bool autoneg;
+ bool speed100;
+ int rxfilter;
+ u32 msg_enable;
+
+ u8 *spi_rx_buf;
+ u8 *spi_tx_buf;
+ dma_addr_t spi_tx_dma;
+ dma_addr_t spi_rx_dma;
+};
+
+/* use ethtool to change the level for any given device */
+static struct {
+ u32 msg_enable;
+} debug = { -1 };
+
+static int enc424j600_spi_trans(struct enc424j600_net *priv, int len)
+{
+ /*modified to suit half duplexed spi */
+ struct spi_transfer tt = {
+ .tx_buf = priv->spi_tx_buf,
+ .len = SPI_OPLEN,
+ };
+ struct spi_transfer tr = {
+ .rx_buf = priv->spi_rx_buf,
+ .len = len,
+ };
+ struct spi_message m;
+ int ret;
+
+ spi_message_init(&m);
+
+ spi_message_add_tail(&tt, &m);
+ spi_message_add_tail(&tr, &m);
+
+ ret = spi_sync(priv->spi, &m);
+
+ if (ret) {
+ dev_err(&priv->spi->dev,
+ "spi transfer failed: ret = %d\n", ret);
+ goto out;
+ }
+
+ memcpy(priv->spi_rx_buf, tr.rx_buf, len);
+
+out:
+ return ret;
+}
+
+/*
+ * Read data from chip SRAM.
+ */
+static int enc424j600_read_sram(struct enc424j600_net *priv,
+ u8 *dst, int len, u16 srcaddr, int window)
+{
+ int ret;
+
+ if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+ return -EINVAL;
+
+ /* First set the write pointer as per selected window */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXRDPT;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDARDPT;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPRDPT;
+
+ priv->spi_tx_buf[1] = srcaddr & 0xFF;
+ priv->spi_tx_buf[2] = srcaddr >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+
+ /* Transfer the data */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = RRXDATA;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = RUDADATA;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = RGPDATA;
+
+ ret = enc424j600_spi_trans(priv, len + 1);
+
+ /* Copy the data from the rx buffer */
+ memcpy(dst, &priv->spi_rx_buf[0], len);
+
+ return ret;
+}
+
+/*
+ * Write data to chip SRAM.
+ */
+static int enc424j600_write_sram(struct enc424j600_net *priv,
+ const u8 *src, int len, u16 dstaddr,
+ int window)
+{
+ int ret;
+
+ if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+ return -EINVAL;
+
+ /* First set the general purpose write pointer */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXWRPT;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDAWRPT;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPWRPT;
+
+ priv->spi_tx_buf[1] = dstaddr & 0xFF;
+ priv->spi_tx_buf[2] = dstaddr >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+
+ /* Copy the data to the tx buffer */
+ memcpy(&priv->spi_tx_buf[1], src, len);
+
+ /* Transfer the data */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXDATA;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDADATA;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPDATA;
+
+ ret = spi_write(priv->spi, priv->spi_tx_buf, len + 1);
+
+ return ret;
+}
+
+/*
+ * Select the current register bank if necessary to be able to read @addr.
+ */
+static void enc424j600_set_bank(struct enc424j600_net *priv, u8 addr)
+{
+ u8 b = (addr & BANK_MASK) >> BANK_SHIFT;
+
+ /* These registers are present in all banks, no need to switch bank */
+ if (addr >= EUDASTL && addr <= ECON1H)
+ return;
+ if (priv->bank == b)
+ return;
+
+ priv->spi_tx_buf[0] = BXSEL(b);
+
+ enc424j600_spi_trans(priv, 1);
+ priv->bank = b;
+}
+
+/*
+ * Sets and Clears addr register
+ */
+static void enc424j600_write_bits(struct enc424j600_net *priv, u8
addr, u8 bits,
+ u8 mask)
+{
+ enc424j600_set_bank(priv, addr);
+ priv->spi_tx_buf[0] = bits;
+ priv->spi_tx_buf[1] = mask;
+ spi_write(priv->spi, priv->spi_tx_buf, 2);
+}
+
+/*
+ * Write a 8bit special function register.
+ * The @sfr parameters takes address of the register.
+ * Uses banked write instruction.
+ */
+static int enc424j600_write_8b_sfr(struct enc424j600_net *priv, u8
sfr, u8 data)
+{
+ int ret;
+
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = data & 0xFF;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 2);
+
+ return ret;
+}
+
+/*
+ * Read a 8bit special function register.
+ * The @sfr parameters takes address of the register.
+ * Uses banked read instruction.
+ */
+static int enc424j600_read_8b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u8 *data)
+{
+ int ret;
+
+ enc424j600_set_bank(priv, sfr);
+ priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
+ ret = enc424j600_spi_trans(priv, 2);
+ *data = priv->spi_rx_buf[0];
+
+ return ret;
+}
+
+/*
+ * Write a 16bit special function register.
+ * The @sfr parameters takes address of the low byte of the register.
+ * Takes care of the endiannes & buffers.
+ * Uses banked write instruction.
+ */
+
+static int enc424j600_write_16b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u16 data)
+{
+ int ret;
+
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = data & 0xFF;
+ priv->spi_tx_buf[2] = data >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+ if (ret && netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
+ __func__, ret);
+
+ return ret;
+}
+
+/*
+ * Read a 16bit special function register.
+ * The @sfr parameters takes address of the low byte of the register.
+ * Takes care of the endiannes & buffers.
+ * Uses banked read instruction.
+ */
+static int enc424j600_read_16b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u16 *data)
+{
+ int ret;
+
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = 0;
+ priv->spi_tx_buf[2] = 0;
+ priv->spi_tx_buf[3] = 0;
+ ret = enc424j600_spi_trans(priv, 3);
+ *data = priv->spi_rx_buf[0] | priv->spi_rx_buf[1] << (u16) 8;
+
+ return ret;
+}
+
+static unsigned long msec20_to_jiffies;
+
+/*
+ * Wait for bits in register to become equal to @readyMask, but at most 20ms.
+ */
+static int checktimeout_16bit(struct enc424j600_net *priv,
+ u8 reg, u16 mask, u16 readyMask)
+{
+ unsigned long timeout = jiffies + msec20_to_jiffies;
+ u16 value;
+
+ /* 20 msec timeout read */
+ enc424j600_read_16b_sfr(priv, reg, &value);
+ while ((value & mask) != readyMask) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_read_16b_sfr(priv, reg, &value);
+ }
+
+ return 0;
+}
+
+static int checktimeout_8bit(struct enc424j600_net *priv,
+ u8 reg, u8 mask, u8 readyMask)
+{
+ unsigned long timeout = jiffies + msec20_to_jiffies;
+ u8 value;
+
+ /* 20 msec timeout read */
+ enc424j600_read_8b_sfr(priv, reg, &value);
+ while ((value & mask) != readyMask) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_read_8b_sfr(priv, reg, &value);
+ }
+
+ return 0;
+}
+
+/*
+ * Reset the enc424j600.
+ */
+static int enc424j600_soft_reset(struct enc424j600_net *priv)
+{
+ int ret;
+ u16 eudast;
+
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ enc424j600_write_16b_sfr(priv, EUDASTL, EUDAST_TEST_VAL);
+ ret = checktimeout_16bit(priv, EUDASTL, 0xFFFF, EUDAST_TEST_VAL);
+ if (ret != 0)
+ return ret;
+ ret = checktimeout_16bit(priv, ESTATH, CLKRDY, CLKRDY);
+ if (ret != 0)
+ return ret;
+
+ priv->spi_tx_buf[0] = SETETHRST;
+ enc424j600_spi_trans(priv, 1);
+ /*inline with the datasheet */
+ udelay(25);
+
+ enc424j600_read_16b_sfr(priv, EUDASTL, &eudast);
+ if (netif_msg_hw(priv) && eudast != 0)
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() EUDASTL is not zero!\n", __func__);
+ /*inline with the datasheet */
+ /*datasheet says to wait for 256 usec atleast */
+ udelay(300);
+ return 0;
+}
+
+/*
+ * PHY register read
+ * PHY registers are not accessed directly, but through the MII
+ */
+static int enc424j600_phy_read(struct enc424j600_net *priv,
+ u16 address, u16 *data)
+{
+ int ret;
+
+ enc424j600_write_16b_sfr(priv, MIREGADRL,
+ address | (MIREGADRH_VAL << 8));
+ enc424j600_write_16b_sfr(priv, MICMDL, MIIRD);
+ udelay(26);
+ ret = !checktimeout_8bit(priv, MISTATL, BUSY, 0);
+ enc424j600_write_16b_sfr(priv, MICMDL, 0);
+ enc424j600_read_16b_sfr(priv, MIRDL, data);
+ return ret;
+}
+
+static int enc424j600_phy_write(struct enc424j600_net *priv, u16 address,
+ u16 data)
+{
+ enc424j600_write_16b_sfr(priv, MIREGADRL,
+ address | (MIREGADRH_VAL << 8));
+ enc424j600_write_16b_sfr(priv, MIWRL, data);
+ udelay(26);
+ return !checktimeout_8bit(priv, MISTATL, BUSY, 0);
+}
+
+/*
+ * Read the hardware MAC address to dev->dev_addr.
+ */
+static int enc424j600_get_hw_macaddr(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ u16 maadr1, maadr2, maadr3;
+
+ mutex_lock(&priv->lock);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MAC address to %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ enc424j600_read_16b_sfr(priv, MAADR3L, &maadr3);
+ ndev->dev_addr[5] = maadr3 >> 8;
+ ndev->dev_addr[4] = maadr3 & 0xff;
+ enc424j600_read_16b_sfr(priv, MAADR2L, &maadr2);
+ ndev->dev_addr[3] = maadr2 >> 8;
+ ndev->dev_addr[2] = maadr2 & 0xff;
+ enc424j600_read_16b_sfr(priv, MAADR1L, &maadr1);
+ ndev->dev_addr[1] = maadr1 >> 8;
+ ndev->dev_addr[0] = maadr1 & 0xff;
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+/*
+ * Program the hardware MAC address from dev->dev_addr.
+ */
+static int enc424j600_set_hw_macaddr(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+
+ mutex_lock(&priv->lock);
+
+ if (priv->hw_enable) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() Hardware must be disabled to set "
+ "Mac address\n", __func__);
+ mutex_unlock(&priv->lock);
+ return -EBUSY;
+ }
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MAC address to %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ enc424j600_write_16b_sfr(priv, MAADR3L,
+ ndev->dev_addr[4] | ndev->dev_addr[5] << 8);
+ enc424j600_write_16b_sfr(priv, MAADR2L,
+ ndev->dev_addr[2] | ndev->dev_addr[3] << 8);
+ enc424j600_write_16b_sfr(priv, MAADR1L,
+ ndev->dev_addr[0] | ndev->dev_addr[1] << 8);
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+/*
+ * Store the new hardware address in dev->dev_addr, and update the MAC.
+ */
+static int enc424j600_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *address = addr;
+
+ if (netif_running(dev))
+ return -EBUSY;
+ if (!is_valid_ether_addr(address->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
+ return enc424j600_set_hw_macaddr(dev);
+}
+
+u8 nolock_regb_read(struct enc424j600_net *priv, u8 address)
+{
+ u8 data;
+
+ enc424j600_read_8b_sfr(priv, address, &data);
+ return data;
+}
+
+u16 nolock_regw_read(struct enc424j600_net *priv, u8 address)
+{
+ u16 data;
+
+ enc424j600_read_16b_sfr(priv, address, &data);
+ return data;
+}
+
+/*Debug routine to dump useful register contents*/
+static void enc424j600_dump_regs(struct enc424j600_net *priv, const char *msg)
+{
+ mutex_lock(&priv->lock);
+ printk(KERN_DEBUG DRV_NAME " %s\n"
+ "Cntrl: ECON1H ECON1L ECON2H ECON2L ESTATH ESTATL EIRH "
+ "EIRL EIEH EIEL\n"
+ " 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x "
+ "0x%02x 0x%02x 0x%02x 0x%02x\n"
+ "MAC : MACON1 MACON2\n"
+ " 0x%04x 0x%04x\n"
+ "Rx : ERXST ERXTAIL ERXHEAD ERXWRPT ERXRDPT ERXFCON MAMXFL\n"
+ " 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n"
+ "Tx : ETXST ETXLEN MACLCON1 \n"
+ " 0x%04x 0x%04x 0x%02x\n",
+ msg,
+ nolock_regb_read(priv, ECON1H), nolock_regb_read(priv, ECON1L),
+ nolock_regb_read(priv, ECON2H), nolock_regb_read(priv, ECON2L),
+ nolock_regb_read(priv, ESTATH), nolock_regb_read(priv, ESTATL),
+ nolock_regb_read(priv, EIRH), nolock_regb_read(priv, EIRL),
+ nolock_regb_read(priv, EIEH), nolock_regb_read(priv, EIEL),
+ nolock_regw_read(priv, MACON1L), nolock_regw_read(priv, MACON2L),
+ nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXTAILL),
+ nolock_regw_read(priv, ERXHEADL),
+ nolock_regw_read(priv, ERXWRPTL), nolock_regw_read(priv,
+ ERXRDPTL),
+ nolock_regw_read(priv, ERXFCONL), nolock_regw_read(priv,
+ MAMXFLL),
+ nolock_regw_read(priv, ETXSTL), nolock_regw_read(priv, ETXLENL),
+ nolock_regw_read(priv, MACLCONL));
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * TODO: Check the functionality
+ * Low power mode shrinks power consumption about 100x, so we'd like
+ * the chip to be in that mode whenever it's inactive. (However, we
+ * can't stay in lowpower mode during suspend with WOL active.)
+ */
+static void enc424j600_lowpower(struct enc424j600_net *priv, bool is_low)
+{
+
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev, "%s power...\n",
+ is_low ? "low" : "high");
+
+#if 0
+ mutex_lock(&priv->lock);
+ if (is_low) {
+ nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+ checktimeout_8bit(priv, ESTAT, ESTAT_RXBUSY, 0);
+ checktimeout_8bit(priv, ECON1, ECON1_TXRTS, 0);
+ /* ECON2_VRPS was set during initialization */
+ nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
+ } else {
+ nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
+ checktimeout_8bit(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
+ /* caller sets ECON1_RXEN */
+ }
+ mutex_unlock(&priv->lock);
+#endif
+}
+
+static unsigned long msec2000_to_jiffies;
+/* Waits for autonegotiation to complete. */
+static int enc424j600_wait_for_autoneg(struct enc424j600_net *priv)
+{
+ unsigned long timeout = jiffies + msec2000_to_jiffies;
+ u16 value;
+
+ /* 20 msec timeout read */
+ enc424j600_phy_read(priv, PHSTAT1, &value);
+ while ((value & ANDONE) == 0) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", PHSTAT1);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_phy_read(priv, PHSTAT1, &value);
+ }
+ return 0;
+
+}
+
+/*
+ * Reset and initialize the chip, but don't enable interrupts and don't
+ * start receiving yet.
+ */
+static int enc424j600_hw_init(struct enc424j600_net *priv)
+{
+ u8 eidledl;
+ u16 phcon1;
+ u16 macon2;
+ u16 econ1l;
+ /*priv->autoneg = AUTONEG_ENABLE; */
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
+ priv->autoneg ? "Autoneg" : (priv->
+ full_duplex ? "FullDuplex" :
+ "HalfDuplex"));
+
+ mutex_lock(&priv->lock);
+
+ priv->bank = 0;
+ priv->hw_enable = false;
+ priv->tx_retry_count = 0;
+ priv->max_pk_counter = 0;
+ priv->rxfilter = RXFILTER_NORMAL;
+
+ if (enc424j600_soft_reset(priv) != 0)
+ return 0;
+
+ /*
+ * Check the device id and silicon revision id.
+ */
+ enc424j600_read_8b_sfr(priv, EIDLEDL, &eidledl);
+
+ if ((eidledl & DEVID_MASK) >> DEVID_SHIFT != ENC424J600_DEV_ID) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() Invalid device ID: %d\n", __func__,
+ (eidledl & DEVID_MASK) >> DEVID_SHIFT);
+ return 0;
+ }
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME ": Silicon revision ID: 0x%02x\n",
+ (eidledl & REVID_MASK) >> REVID_SHIFT);
+
+ enc424j600_write_16b_sfr(priv, ETXSTL, TXSTART);
+ enc424j600_write_16b_sfr(priv, ERXSTL, RXSTART);
+
+ priv->next_pk_ptr = RXSTART;
+ enc424j600_write_16b_sfr(priv, ERXTAILL, SRAMSIZE - 2);
+ enc424j600_write_16b_sfr(priv, ERXFCONL, UCEN | BCEN | CRCEN | RUNTEN);
+
+ enc424j600_phy_write(priv, PHANA, PHANA_DEFAULT);
+
+ /* PHCON1 */
+ phcon1 = 0;
+ if (priv->autoneg) {
+ /* Enable autonegotiation and renegotiate */
+ phcon1 |= ANEN | RENEG;
+ } else {
+ if (priv->speed100)
+ phcon1 |= SPD100;
+ if (priv->full_duplex)
+ phcon1 |= PFULDPX;
+ }
+ enc424j600_phy_write(priv, PHCON1, phcon1);
+
+ /* MACON2
+ * defer transmission if collision occurs (only for half duplex)
+ * pad to 60 or 64 bytes and append CRC
+ * enable receiving huge frames (instead of limiting packet size) */
+ macon2 = MACON2_DEFER | PADCFG2 | PADCFG0 | TXCRCEN | HFRMEN;
+
+ /* If autonegotiation is enabled, we have to wait untill it finishes
+ * and set the PHYDPX bit in MACON2 correctly */
+ if (priv->autoneg) {
+ u8 estath;
+ if (!enc424j600_wait_for_autoneg(priv)) {
+ /* read the PHYDPX bit in ESTAT and set FULDPX in
+ MACON2 accordingly */
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ if (estath & PHYDPX)
+ macon2 |= FULDPX;
+ } else /*if timedout, just disable autoneg */
+ priv->autoneg = AUTONEG_DISABLE;
+ } else if (priv->full_duplex)
+ macon2 |= FULDPX;
+
+ enc424j600_write_16b_sfr(priv, MACON2L, macon2);
+
+ /* MAIPGL
+ * Recomended values for inter packet gaps */
+ if (!priv->autoneg) {
+ enc424j600_write_16b_sfr(priv, MAIPGL,
+ MAIPGL_VAL | (MAIPGH_VAL << 8));
+ }
+
+ /*
+ * Select enabled interrupts, but don't set the global
+ * interrupt enable flag.
+ */
+
+ enc424j600_write_16b_sfr(priv, EIEL,
+ LINKIE << 8 | PKTIE | DMAIE | TXIE | TXABTIE |
+ RXABTIE);
+
+ enc424j600_read_16b_sfr(priv, ECON1L, &econ1l);
+ econ1l |= (RXEN);
+ enc424j600_write_16b_sfr(priv, ECON1L, econ1l);
+
+ mutex_unlock(&priv->lock);
+
+ if (netif_msg_hw(priv))
+ enc424j600_dump_regs(priv, "Hw initialized.");
+
+ return 1;
+}
+
+static void enc424j600_hw_enable(struct enc424j600_net *priv)
+{
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
+ __func__);
+
+ mutex_lock(&priv->lock);
+
+ /* Clear any pending interrupts */
+ enc424j600_write_16b_sfr(priv, EIRL, 0);
+
+ /* Enable global interrupt flag */
+ enc424j600_write_bits(priv, EIEH, BFS(EIEH), INTIE);
+
+ /* enable receive logic */
+ enc424j600_write_bits(priv, ECON1L, BFS(ECON1L), RXEN);
+ priv->hw_enable = true;
+ mutex_unlock(&priv->lock);
+}
+
+static void enc424j600_hw_disable(struct enc424j600_net *priv)
+{
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() disabling interrupts.\n",
+ __func__);
+
+ mutex_lock(&priv->lock);
+
+ /* disable receive logic */
+ enc424j600_write_bits(priv, ECON1L, BFC(ECON1L), RXEN);
+
+ /* Disable global interrupt flag */
+ enc424j600_write_bits(priv, EIEH, BFC(EIEH), INTIE);
+
+ priv->hw_enable = false;
+
+ mutex_unlock(&priv->lock);
+}
+
+static int
+enc424j600_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ int ret = 0;
+
+ if (!priv->hw_enable) {
+ /* link is in low power mode now; duplex setting
+ * will take effect on next enc424j600_hw_init().
+ */
+ if (speed == SPEED_10 || speed == SPEED_100) {
+ priv->autoneg = (autoneg == AUTONEG_ENABLE);
+ priv->full_duplex = (duplex == DUPLEX_FULL);
+ priv->speed100 = (speed == SPEED_100);
+ } else {
+ if (netif_msg_link(priv))
+ dev_warn(&ndev->dev,
+ "unsupported link setting\n");
+ /*speeds other than SPEED_10 and SPEED_100 */
+ /*are not supported by chip */
+ ret = -EOPNOTSUPP;
+ }
+ } else {
+ if (netif_msg_link(priv))
+ dev_warn(&ndev->dev, "Warning: hw must be disabled "
+ "to set link mode\n");
+ ret = -EBUSY;
+ }
+ return ret;
+}
+
+/*
+ * Receive Status vector
+ */
+static void enc424j600_dump_rsv(struct enc424j600_net *priv, const char *msg,
+ u16 pk_ptr, int len, u16 sts)
+{
+ printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
+ msg, pk_ptr);
+ printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
+ RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
+ printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
+ " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
+ RSV_GETBIT(sts, RSV_CRCERROR),
+ RSV_GETBIT(sts, RSV_LENCHECKERR),
+ RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
+ printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
+ "LongDropEvent: %d, CarrierEvent: %d\n",
+ RSV_GETBIT(sts, RSV_RXMULTICAST),
+ RSV_GETBIT(sts, RSV_RXBROADCAST),
+ RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
+ RSV_GETBIT(sts, RSV_CARRIEREV));
+ printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
+ " UnknownOp: %d, VLanTagFrame: %d\n",
+ RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
+ RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
+ RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
+ RSV_GETBIT(sts, RSV_RXTYPEVLAN));
+}
+
+static void dump_packet(const char *msg, int len, const char *data)
+{
+
+ printk(KERN_ALERT ": %s - packet len:%d\n", msg, len);
+ print_hex_dump(KERN_ALERT, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
+ data, len, true);
+}
+
+/*
+ * Calculate wrap around when reading beyond the end of the RX buffer
+ */
+static u16 rx_packet_start(u16 ptr)
+{
+ if (ptr + RSV_SIZE > RXEND_INIT)
+ return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART + 1);
+ else
+ return ptr + RSV_SIZE;
+}
+
+/*
+ * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
+ */
+static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
+{
+ u16 erxrdpt;
+
+ if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
+ erxrdpt = end;
+ else
+ erxrdpt = next_packet_ptr - 1;
+
+ return erxrdpt;
+}
+
+static void nolock_rxfifo_init(struct enc424j600_net *priv, u16 start, u16 end)
+{
+ u16 erxrdpt;
+
+ if (start > 0x5FFF || end > 0x5FFF || start > end) {
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
+ "bad parameters!\n", __func__, start, end);
+ return;
+ }
+ /* set receive buffer start + end */
+ priv->next_pk_ptr = start;
+ enc424j600_write_16b_sfr(priv, ERXSTL, start);
+ erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
+ enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
+ enc424j600_write_16b_sfr(priv, ERXTAILL, end);
+}
+
+/*
+ * Hardware receive function.
+ * Read the buffer memory, update the FIFO pointer to free the buffer,
+ * check the status vector and decrement the packet counter.
+ */
+static void enc424j600_hw_rx(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ struct sk_buff *skb = NULL;
+ u16 erxrdpt, next_packet, rxstat;
+ u8 pkcnt;
+ u16 head, tail;
+ u8 rsv[RSV_SIZE];
+ u16 newrxtail;
+ int len;
+
+ if (netif_msg_rx_status(priv))
+ printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
+ priv->next_pk_ptr);
+ if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev,
+ "%s() Invalid packet address!! 0x%04x\n",
+ __func__, priv->next_pk_ptr);
+ mutex_lock(&priv->lock);
+ enc424j600_write_bits(priv, ECON1L, BFC(ECON1L), RXEN);
+ enc424j600_write_bits(priv, ECON2L, BFS(ECON2L), RXRST);
+ enc424j600_write_bits(priv, ECON2L, BFC(ECON2L), RXRST);
+ nolock_rxfifo_init(priv, RXSTART, RXEND_INIT);
+ enc424j600_write_bits(priv, EIRL, BFC(EIRL), RXABTIF);
+ enc424j600_write_bits(priv, ECON1L, BFS(ECON1L), RXEN);
+ mutex_unlock(&priv->lock);
+ ndev->stats.rx_errors++;
+ return;
+ }
+
+ /* Read next packet pointer and rx status vector */
+ enc424j600_read_sram(priv, rsv, sizeof(rsv), priv->next_pk_ptr,
+ RXWINDOW);
+
+ next_packet = rsv[1];
+ next_packet <<= 8;
+ next_packet |= rsv[0];
+
+ len = rsv[3];
+ len <<= 8;
+ len |= rsv[2];
+
+ rxstat = rsv[5];
+ rxstat <<= 8;
+ rxstat |= rsv[4];
+
+ if (netif_msg_rx_status(priv))
+ enc424j600_dump_rsv(priv, __func__, next_packet, len, rxstat);
+
+ if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
+ ndev->stats.rx_errors++;
+ if (RSV_GETBIT(rxstat, RSV_CRCERROR))
+ ndev->stats.rx_crc_errors++;
+ if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
+ ndev->stats.rx_frame_errors++;
+ if (len > MAX_FRAMELEN)
+ ndev->stats.rx_over_errors++;
+ } else {
+ skb = dev_alloc_skb(len + NET_IP_ALIGN);
+ if (!skb) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev,
+ "out of memory for Rx'd frame\n");
+ ndev->stats.rx_dropped++;
+ } else {
+ skb->dev = ndev;
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ /* copy the packet from the receive buffer */
+ enc424j600_read_sram(priv, skb_put(skb, len), len,
+ rx_packet_start(priv->next_pk_ptr),
+ RXWINDOW);
+
+ if (netif_msg_pktdata(priv))
+ dump_packet(__func__, skb->len, skb->data);
+ skb->protocol = eth_type_trans(skb, ndev);
+ /* update statistics */
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += len;
+ netif_rx_ni(skb);
+ }
+ }
+ newrxtail = next_packet - 2;
+ if (next_packet == RXSTART)
+ newrxtail = SRAMSIZE - 2;
+
+ enc424j600_write_16b_sfr(priv, ERXTAILL, newrxtail);
+ /*
+ * Move the RX read pointer to the start of the next
+ * received packet.
+ * This frees the memory we just read out
+ */
+ erxrdpt = erxrdpt_workaround(next_packet, RXSTART, RXEND_INIT);
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n", __func__,
+ erxrdpt);
+
+ /*TODO: remove mutex_lock wherever not required */
+ mutex_lock(&priv->lock);
+ enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
+
+ priv->next_pk_ptr = next_packet;
+ enc424j600_read_8b_sfr(priv, ESTATL, &pkcnt);
+ enc424j600_read_16b_sfr(priv, ERXHEADL, &head);
+ enc424j600_read_16b_sfr(priv, ERXTAILL, &tail);
+ /* we are done with this packet, decrement the packet counter */
+ enc424j600_write_bits(priv, ECON1H, BFS(ECON1H), PKTDEC);
+
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * Access the PHY to determine link status
+ */
+static void enc424j600_check_link_status(struct enc424j600_net *priv)
+{
+ u8 estath;
+ u16 macon2;
+
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ if (estath & PHYLNK) {
+ if (priv->autoneg) {
+ if (!enc424j600_wait_for_autoneg(priv)) {
+ if (estath & PHYDPX) {
+ printk(KERN_ALERT "Full Duplex");
+ enc424j600_read_16b_sfr(priv, MACON2L,
+ &macon2);
+ macon2 |= FULDPX;
+ enc424j600_write_16b_sfr(priv, MACON2L,
+ macon2);
+ }
+ } else /*if timed out, disable autoneg and continue */
+ priv->autoneg = AUTONEG_DISABLE;
+ }
+ netif_carrier_on(priv->netdev);
+ if (netif_msg_ifup(priv))
+ dev_info(&(priv->netdev->dev), "link up\n");
+ } else {
+ if (netif_msg_ifdown(priv))
+ dev_info(&(priv->netdev->dev), "link down\n");
+ netif_carrier_off(priv->netdev);
+ }
+}
+
+static void enc424j600_tx_clear(struct enc424j600_net *priv, bool err)
+{
+ struct net_device *ndev = priv->netdev;
+
+ if (err)
+ ndev->stats.tx_errors++;
+ else
+ ndev->stats.tx_packets++;
+
+ if (priv->tx_skb) {
+ if (!err)
+ ndev->stats.tx_bytes += priv->tx_skb->len;
+ dev_kfree_skb(priv->tx_skb);
+ priv->tx_skb = NULL;
+ }
+
+ netif_wake_queue(ndev);
+}
+
+static int enc424j600_int_rx_abbort_handler(struct enc424j600_net *priv,
+ int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intRXAbt(%d)\n", loop);
+ mutex_lock(&priv->lock);
+ priv->netdev->stats.rx_dropped++;
+ enc424j600_write_bits(priv, EIRL, BFC(EIRL), RXABTIF);
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_link_handler(struct enc424j600_net *priv, int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intLINK(%d)\n", loop);
+
+ /* we check more than is necessary here --
+ * only PHYLNK would be needed. */
+ enc424j600_check_link_status(priv);
+
+ return loop;
+}
+
+static int enc424j600_int_tx_handler(struct enc424j600_net *priv, int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intTX(%d)\n", loop);
+
+ mutex_lock(&priv->lock);
+ enc424j600_tx_clear(priv, false);
+ enc424j600_write_bits(priv, EIRL, BFC(EIRL), TXIF);
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_tx_err_handler(struct enc424j600_net *priv, int loop)
+{
+ u8 etxstat;
+ loop++;
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intTXErr(%d)\n", loop);
+
+ mutex_lock(&priv->lock);
+
+ enc424j600_read_8b_sfr(priv, ETXSTATH, &etxstat);
+
+ if (etxstat & LATECOL) {
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": Late collision TXErr (%d)\n",
+ priv->tx_retry_count);
+ if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
+ enc424j600_write_bits(priv, ECON1L, BFS(ECON1L), TXRTS);
+ else
+ enc424j600_tx_clear(priv, true);
+ } else if (etxstat & MAXCOL) {
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG DRV_NAME ": Max collisions TXErr\n");
+ enc424j600_tx_clear(priv, true);
+ } else {
+ enc424j600_tx_clear(priv, true);
+ }
+
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_received_packet_handler(struct enc424j600_net *priv)
+{
+ uint8_t pk_counter;
+ int ret;
+
+ enc424j600_read_8b_sfr(priv, ESTATL, &pk_counter);
+ if (pk_counter && netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
+ if (pk_counter > priv->max_pk_counter) {
+ /* update statistics */
+ priv->max_pk_counter = pk_counter;
+ if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
+ printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
+ priv->max_pk_counter);
+ }
+ ret = pk_counter;
+ while (pk_counter-- > 0)
+ enc424j600_hw_rx(priv->netdev);
+ return ret;
+}
+
+static void enc424j600_irq_work_handler(struct work_struct *work)
+{
+
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, irq_work);
+ int loop;
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ /* disable further interrupts */
+ enc424j600_write_bits(priv, EIEH, BFC(EIEH), INTIE);
+
+ do {
+ u16 intflags;
+ enc424j600_read_16b_sfr(priv, EIRL, &intflags);
+ loop = 0;
+
+ /* LINK changed handler */
+ if ((intflags & LINKIF) != 0)
+ loop = enc424j600_int_link_handler(priv, loop);
+
+ /* TX complete handler */
+ if ((intflags & TXIF) != 0)
+ loop = enc424j600_int_tx_handler(priv, loop);
+
+ /* TX Error handler */
+ if ((intflags & TXABTIF) != 0) {
+ printk(KERN_ALERT "ABORTING TRANSMITTING PACKET");
+ loop = enc424j600_int_tx_err_handler(priv, loop);
+ }
+ /* RX Error handler */
+ if ((intflags & RXABTIF) != 0) {
+ printk(KERN_ALERT "ABORTING RECEIVED PACKET");
+ loop = enc424j600_int_rx_abbort_handler(priv, loop);
+ }
+ /* RX handler */
+ if ((intflags & PKTIF) != 0)
+ loop = enc424j600_int_received_packet_handler(priv);
+ enc424j600_write_bits(priv, EIRL, BFC(EIRL), intflags && 0xff);
+ enc424j600_write_bits(priv, EIRH, BFC(EIRH), intflags >> 8);
+ } while (loop);
+ /* re-enable interrupts */
+ enc424j600_write_bits(priv, EIEH, BFS(EIEH), INTIE);
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
+}
+
+void locked_reg_bfset(struct enc424j600_net *priv, u8 addr, u8 mask)
+{
+ mutex_lock(&priv->lock);
+ enc424j600_write_bits(priv, addr, BFS(addr), mask);
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * Hardware transmit function.
+ * Fill the buffer memory and send the contents of the transmit buffer
+ * onto the network
+ */
+static void enc424j600_hw_tx(struct enc424j600_net *priv)
+{
+ if (!priv->tx_skb) {
+ enc424j600_tx_clear(priv, false);
+ return;
+ }
+
+ if (netif_msg_tx_queued(priv))
+ printk(KERN_DEBUG DRV_NAME ": Tx Packet Len:%d\n",
+ priv->tx_skb->len);
+
+ if (netif_msg_pktdata(priv))
+ dump_packet(__func__, priv->tx_skb->len, priv->tx_skb->data);
+
+ enc424j600_write_sram(priv, priv->tx_skb->data, priv->tx_skb->len,
+ TXSTART, GPWINDOW);
+
+ /* Set the tx pointer to start of general purpose SRAM area */
+ enc424j600_write_16b_sfr(priv, ETXSTL, TXSTART);
+
+ /* Write the transfer length */
+ enc424j600_write_16b_sfr(priv, ETXLENL, priv->tx_skb->len);
+
+ /* set TX request flag */
+ locked_reg_bfset(priv, ECON1L, TXRTS);
+}
+
+static int enc424j600_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_tx_queued(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ /* If some error occurs while trying to transmit this
+ * packet, you should return '1' from this function.
+ * In such a case you _may not_ do anything to the
+ * SKB, it is still owned by the network queueing
+ * layer when an error is returned. This means you
+ * may not modify any SKB fields, you may not free
+ * the SKB, etc.
+ */
+ netif_stop_queue(dev);
+
+ /* save the timestamp */
+ priv->netdev->trans_start = jiffies;
+ /* Remember the skb for deferred processing */
+ priv->tx_skb = skb;
+ schedule_work(&priv->tx_work);
+
+ return NETDEV_TX_OK;
+}
+
+static void enc424j600_tx_work_handler(struct work_struct *work)
+{
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, tx_work);
+
+ /* actual delivery of data */
+ enc424j600_hw_tx(priv);
+}
+
+static irqreturn_t enc424j600_irq(int irq, void *dev_id)
+{
+ struct enc424j600_net *priv = dev_id;
+
+ /*
+ * Can't do anything in interrupt context because we need to
+ * block (spi_sync() is blocking) so fire of the interrupt
+ * handling workqueue.
+ * Remember that we access enc424j600 registers through SPI bus
+ * via spi_sync() call.
+ */
+ schedule_work(&priv->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void enc424j600_tx_timeout(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+
+ if (netif_msg_timer(priv))
+ dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
+
+ ndev->stats.tx_errors++;
+ /* can't restart safely under softirq */
+ schedule_work(&priv->restart_work);
+}
+
+/*
+ * Open/initialize the board. This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+static int enc424j600_net_open(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ if (netif_msg_ifup(priv))
+ dev_err(&dev->dev, "invalid MAC address %pM\n",
+ dev->dev_addr);
+ return -EADDRNOTAVAIL;
+ }
+ /* Reset the hardware here (and take it out of low power mode) */
+ enc424j600_lowpower(priv, false);
+ enc424j600_hw_disable(priv);
+ if (!enc424j600_hw_init(priv)) {
+ if (netif_msg_ifup(priv))
+ dev_err(&dev->dev, "hw_reset() failed\n");
+ return -EINVAL;
+ }
+ /* Update the MAC address (in case user has changed it) */
+ enc424j600_set_hw_macaddr(dev);
+ /* Enable interrupts */
+ enc424j600_hw_enable(priv);
+ /* check link status */
+ enc424j600_check_link_status(priv);
+ /* We are now ready to accept transmit requests from
+ * the queueing layer of the networking.
+ */
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/* The inverse routine to net_open(). */
+static int enc424j600_net_close(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ enc424j600_hw_disable(priv);
+ enc424j600_lowpower(priv, true);
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+/*
+ * Set or clear the multicast filter for this adapter
+ * num_addrs == -1 Promiscuous mode, receive all packets
+ * num_addrs == 0 Normal mode, filter out multicast packets
+ * num_addrs > 0 Multicast mode, receive normal and MC packets
+ */
+static void enc424j600_set_multicast_list(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+ int oldfilter = priv->rxfilter;
+
+ if (dev->flags & IFF_PROMISC) {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "promiscuous mode\n");
+ priv->rxfilter = RXFILTER_PROMISC;
+ } else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "%smulticast mode\n",
+ (dev->flags & IFF_ALLMULTI) ? "all-" : "");
+ priv->rxfilter = RXFILTER_MULTI;
+ } else {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "normal mode\n");
+ priv->rxfilter = RXFILTER_NORMAL;
+ }
+
+ if (oldfilter != priv->rxfilter)
+ schedule_work(&priv->setrx_work);
+}
+
+void locked_regb_write(struct enc424j600_net *priv, u8 address, u8 data)
+{
+ mutex_lock(&priv->lock);
+ enc424j600_write_8b_sfr(priv, address, data);
+ mutex_unlock(&priv->lock);
+}
+
+static void enc424j600_setrx_work_handler(struct work_struct *work)
+{
+ u16 macon1;
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, setrx_work);
+
+ if (priv->rxfilter == RXFILTER_PROMISC) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
+ enc424j600_read_16b_sfr(priv, MACON1L, &macon1);
+ macon1 = macon1 | PASSALL;
+ enc424j600_write_16b_sfr(priv, MACON1L, macon1);
+ locked_regb_write(priv, ERXFCONL, UCEN | MCEN | NOTMEEN);
+ } else if (priv->rxfilter == RXFILTER_MULTI) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
+ locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN | MCEN);
+
+ } else {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": normal mode\n");
+ locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN);
+
+ }
+}
+
+static void enc424j600_restart_work_handler(struct work_struct *work)
+{
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, restart_work);
+ struct net_device *ndev = priv->netdev;
+ int ret;
+
+ rtnl_lock();
+ if (netif_running(ndev)) {
+ enc424j600_net_close(ndev);
+ ret = enc424j600_net_open(ndev);
+ if (unlikely(ret)) {
+ dev_info(&ndev->dev, " could not restart %d\n", ret);
+ dev_close(ndev);
+ }
+ }
+ rtnl_unlock();
+}
+
+/* ......................... ETHTOOL SUPPORT ........................... */
+
+static void
+enc424j600_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+ strlcpy(info->bus_info,
+ dev_name(dev->dev.parent), sizeof(info->bus_info));
+}
+
+static int
+enc424j600_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->supported = SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_TP;
+
+ cmd->speed = priv->speed100 ? SPEED_100 : SPEED_10;
+ cmd->duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
+ cmd->port = PORT_TP;
+ cmd->autoneg = priv->autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+ return 0;
+}
+
+static int
+enc424j600_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ return enc424j600_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
+}
+
+static u32 enc424j600_get_msglevel(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ return priv->msg_enable;
+}
+
+static void enc424j600_set_msglevel(struct net_device *dev, u32 val)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ priv->msg_enable = val;
+}
+
+static const struct ethtool_ops enc424j600_ethtool_ops = {
+ .get_settings = enc424j600_get_settings,
+ .set_settings = enc424j600_set_settings,
+ .get_drvinfo = enc424j600_get_drvinfo,
+ .get_msglevel = enc424j600_get_msglevel,
+ .set_msglevel = enc424j600_set_msglevel,
+ .get_regs = enc424j600_dump_regs,
+};
+
+static int enc424j600_chipset_init(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ enc424j600_get_hw_macaddr(dev);
+ return enc424j600_hw_init(priv);
+}
+
+static const struct net_device_ops enc424j600_netdev_ops = {
+ .ndo_open = enc424j600_net_open,
+ .ndo_stop = enc424j600_net_close,
+ .ndo_start_xmit = enc424j600_send_packet,
+ .ndo_set_multicast_list = enc424j600_set_multicast_list,
+ .ndo_set_mac_address = enc424j600_set_mac_address,
+ .ndo_tx_timeout = enc424j600_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int __devinit enc424j600_probe(struct spi_device *spi)
+{
+ struct net_device *dev;
+ struct enc424j600_net *priv;
+ int ret = 0;
+
+ if (netif_msg_drv(&debug))
+ dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
+ DRV_VERSION);
+
+ dev = alloc_etherdev(sizeof(struct enc424j600_net));
+ if (!dev) {
+ if (netif_msg_drv(&debug))
+ dev_err(&spi->dev, DRV_NAME
+ ": unable to alloc new ethernet\n");
+ ret = -ENOMEM;
+ goto error_alloc;
+ }
+ priv = netdev_priv(dev);
+
+ priv->netdev = dev;
+ priv->spi = spi;
+ priv->msg_enable = netif_msg_init(debug.msg_enable,
+ ENC424J600_MSG_DEFAULT);
+ mutex_init(&priv->lock);
+ INIT_WORK(&priv->tx_work, enc424j600_tx_work_handler);
+ INIT_WORK(&priv->setrx_work, enc424j600_setrx_work_handler);
+ INIT_WORK(&priv->irq_work, enc424j600_irq_work_handler);
+ INIT_WORK(&priv->restart_work, enc424j600_restart_work_handler);
+ dev_set_drvdata(&spi->dev, priv);
+ SET_NETDEV_DEV(dev, &spi->dev);
+ /*TODO: chip DMA features to be utilized */
+ /* If requested, allocate DMA buffers */
+ if (enc424j600_enable_dma) {
+ spi->dev.coherent_dma_mask = ~0;
+
+ /*
+ * Minimum coherent DMA allocation is PAGE_SIZE, so allocate
+ * that much and share it between Tx and Rx DMA buffers.
+ */
+#if SPI_TRANSFER_BUF_LEN > PAGE_SIZE / 2
+#error "A problem in DMA buffer allocation"
+#endif
+ priv->spi_tx_buf = dma_alloc_coherent(&spi->dev,
+ PAGE_SIZE,
+ &priv->spi_tx_dma,
+ GFP_DMA);
+
+ if (priv->spi_tx_buf) {
+ priv->spi_rx_buf =
+ (u8 *) (priv->spi_tx_buf + (PAGE_SIZE / 2));
+ priv->spi_rx_dma = (dma_addr_t) (priv->spi_tx_dma +
+ (PAGE_SIZE / 2));
+ } else {
+ /* Fall back to non-DMA */
+ enc424j600_enable_dma = 0;
+ }
+ }
+
+ /* Allocate non-DMA buffers */
+ if (!enc424j600_enable_dma) {
+ priv->spi_tx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_tx_buf) {
+ ret = -ENOMEM;
+ goto error_tx_buf;
+ }
+ priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_rx_buf) {
+ ret = -ENOMEM;
+ goto error_rx_buf;
+ }
+ }
+
+ if (!enc424j600_chipset_init(dev)) {
+ if (netif_msg_probe(priv))
+ dev_info(&spi->dev, DRV_NAME " chip not found\n");
+ ret = -EIO;
+ goto error_irq;
+ }
+
+ /* Board setup must set the relevant edge trigger type;
+ * level triggers won't currently work.
+ */
+ ret = request_irq(spi->irq, enc424j600_irq, 0, DRV_NAME, priv);
+ if (ret < 0) {
+ if (netif_msg_probe(priv))
+ dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
+ "(ret = %d)\n", spi->irq, ret);
+ goto error_irq;
+ }
+
+ dev->if_port = IF_PORT_10BASET;
+ dev->irq = spi->irq;
+ dev->netdev_ops = &enc424j600_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ SET_ETHTOOL_OPS(dev, &enc424j600_ethtool_ops);
+
+ enc424j600_lowpower(priv, true);
+
+ ret = register_netdev(dev);
+ if (ret) {
+ if (netif_msg_probe(priv))
+ dev_err(&spi->dev, "register netdev " DRV_NAME
+ " failed (ret = %d)\n", ret);
+ goto error_register;
+ }
+ dev_info(&dev->dev, DRV_NAME " driver registered\n");
+
+ return ret;
+
+error_register:
+ free_irq(spi->irq, priv);
+error_irq:
+ free_netdev(dev);
+ if (!enc424j600_enable_dma)
+ kfree(priv->spi_rx_buf);
+error_rx_buf:
+ if (!enc424j600_enable_dma)
+ kfree(priv->spi_tx_buf);
+error_tx_buf:
+ if (enc424j600_enable_dma) {
+ dma_free_coherent(&spi->dev, PAGE_SIZE,
+ priv->spi_tx_buf, priv->spi_tx_dma);
+ }
+error_alloc:
+ return ret;
+}
+
+static int __devexit enc424j600_remove(struct spi_device *spi)
+{
+ struct enc424j600_net *priv = dev_get_drvdata(&spi->dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": remove\n");
+
+ unregister_netdev(priv->netdev);
+ free_irq(spi->irq, priv);
+ free_netdev(priv->netdev);
+
+ return 0;
+}
+
+static struct spi_driver enc424j600_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = enc424j600_probe,
+ .remove = __devexit_p(enc424j600_remove),
+};
+
+static int __init enc424j600_init(void)
+{
+ msec20_to_jiffies = msecs_to_jiffies(20);
+ /*autoneg works from 1600ms */
+ msec2000_to_jiffies = msecs_to_jiffies(2000);
+
+ return spi_register_driver(&enc424j600_driver);
+}
+
+module_init(enc424j600_init);
+
+static void __exit enc424j600_exit(void)
+{
+ spi_unregister_driver(&enc424j600_driver);
+}
+
+module_exit(enc424j600_exit);
+
+MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
+MODULE_AUTHOR("Balaji Venkatachalam <balaji.v@thotakaa.com>");
+MODULE_LICENSE("GPL");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");
+module_param(enc424j600_enable_dma, int, S_IRUGO);
+MODULE_PARM_DESC(enc424j600_enable_dma, "Enable SPI DMA. Default: 0 (Off)");
+MODULE_ALIAS("spi:" DRV_NAME);
diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600_hw.h
b/drivers/net/enc424j600_hw.h
--- a/drivers/net/enc424j600_hw.h 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/enc424j600_hw.h 2011-01-05 23:51:24.000000000 +0530
@@ -0,0 +1,460 @@
+/*
+* enc424j600_hw.h: Register definitions
+*
+*/
+
+#ifndef _ENC424J600_HW_H
+#define _ENC424J600_HW_H
+
+/*
+* ENC424J600 Control Registers
+* Control register definitions are a combination of address
+* and bank number
+* - Register address (bits 0-4)
+* - Bank number (bits 5-6)
+*/
+#define ADDR_MASK 0x1F
+#define BANK_MASK 0x60
+#define BANK_SHIFT 5
+
+/* All-bank registers */
+#define EUDASTL 0x16
+#define EUDASTH 0x17
+#define EUDANDL 0x18
+#define EUDANDH 0x19
+#define ESTATL 0x1A
+#define ESTATH 0x1B
+#define EIRL 0x1C
+#define EIRH 0x1D
+#define ECON1L 0x1E
+#define ECON1H 0x1F
+
+/* Bank 0 registers */
+#define ETXSTL (0x00 | 0x00)
+#define ETXSTH (0x01 | 0x00)
+#define ETXLENL (0x02 | 0x00)
+#define ETXLENH (0x03 | 0x00)
+#define ERXSTL (0x04 | 0x00)
+#define ERXSTH (0x05 | 0x00)
+#define ERXTAILL (0x06 | 0x00)
+#define ERXTAILH (0x07 | 0x00)
+#define ERXHEADL (0x08 | 0x00)
+#define ERXHEADH (0x09 | 0x00)
+#define EDMASTL (0x0A | 0x00)
+#define EDMASTH (0x0B | 0x00)
+#define EDMALENL (0x0C | 0x00)
+#define EDMALENH (0x0D | 0x00)
+#define EDMADSTL (0x0E | 0x00)
+#define EDMADSTH (0x0F | 0x00)
+#define EDMACSL (0x10 | 0x00)
+#define EDMACSH (0x11 | 0x00)
+#define ETXSTATL (0x12 | 0x00)
+#define ETXSTATH (0x13 | 0x00)
+#define ETXWIREL (0x14 | 0x00)
+#define ETXWIREH (0x15 | 0x00)
+
+/* Bank 1 registers */
+#define EHT1L (0x00 | 0x20)
+#define EHT1H (0x01 | 0x20)
+#define EHT2L (0x02 | 0x20)
+#define EHT2H (0x03 | 0x20)
+#define EHT3L (0x04 | 0x20)
+#define EHT3H (0x05 | 0x20)
+#define EHT4L (0x06 | 0x20)
+#define EHT4H (0x07 | 0x20)
+#define EPMM1L (0x08 | 0x20)
+#define EPMM1H (0x09 | 0x20)
+#define EPMM2L (0x0A | 0x20)
+#define EPMM2H (0x0B | 0x20)
+#define EPMM3L (0x0C | 0x20)
+#define EPMM3H (0x0D | 0x20)
+#define EPMM4L (0x0E | 0x20)
+#define EPMM4H (0x0F | 0x20)
+#define EPMCSL (0x10 | 0x20)
+#define EPMCSH (0x11 | 0x20)
+#define EPMOL (0x12 | 0x20)
+#define EPMOH (0x13 | 0x20)
+#define ERXFCONL (0x14 | 0x20)
+#define ERXFCONH (0x15 | 0x20)
+
+/* Bank 2 registers */
+#define MACON1L (0x00 | 0x40)
+#define MACON1H (0x01 | 0x40)
+#define MACON2L (0x02 | 0x40)
+#define MACON2H (0x03 | 0x40)
+#define MABBIPGL (0x04 | 0x40)
+#define MABBIPGH (0x05 | 0x40)
+#define MAIPGL (0x06 | 0x40)
+#define MAIPGH (0x07 | 0x40)
+#define MACLCONL (0x08 | 0x40)
+#define MACLCONH (0x09 | 0x40)
+#define MAMXFLL (0x0A | 0x40)
+#define MAMXFLH (0x0B | 0x40)
+#define MICMDL (0x12 | 0x40)
+#define MICMDH (0x13 | 0x40)
+#define MIREGADRL (0x14 | 0x40)
+#define MIREGADRH (0x15 | 0x40)
+
+/* Bank 3 registers */
+#define MAADR3L (0x00 | 0x60)
+#define MAADR3H (0x01 | 0x60)
+#define MAADR2L (0x02 | 0x60)
+#define MAADR2H (0x03 | 0x60)
+#define MAADR1L (0x04 | 0x60)
+#define MAADR1H (0x05 | 0x60)
+#define MIWRL (0x06 | 0x60)
+#define MIWRH (0x07 | 0x60)
+#define MIRDL (0x08 | 0x60)
+#define MIRDH (0x09 | 0x60)
+#define MISTATL (0x0A | 0x60)
+#define MISTATH (0x0B | 0x60)
+#define EPAUSL (0x0C | 0x60)
+#define EPAUSH (0x0D | 0x60)
+#define ECON2L (0x0E | 0x60)
+#define ECON2H (0x0F | 0x60)
+#define ERXWML (0x10 | 0x60)
+#define ERXWMH (0x11 | 0x60)
+#define EIEL (0x12 | 0x60)
+#define EIEH (0x13 | 0x60)
+#define EIDLEDL (0x14 | 0x60)
+#define EIDLEDH (0x15 | 0x60)
+
+/* Unbanked registers */
+#define EGPDATA (0x00 | 0x80)
+#define ERXDATA (0x02 | 0x80)
+#define EUDADATA (0x04 | 0x80)
+#define EGPRDPTL (0x06 | 0x80)
+#define EGPRDPTH (0x07 | 0x80)
+#define EGPWRPTL (0x08 | 0x80)
+#define EGPWRPTH (0x09 | 0x80)
+#define ERXRDPTL (0x0A | 0x80)
+#define ERXRDPTH (0x0B | 0x80)
+#define ERXWRPTL (0x0C | 0x80)
+#define ERXWRPTH (0x0D | 0x80)
+#define EUDARDPTL (0x0E | 0x80)
+#define EUDARDPTH (0x0F | 0x80)
+#define EUDAWRPTL (0x10 | 0x80)
+#define EUDAWRPTH (0x11 | 0x80)
+
+/* PHY registers */
+#define PHCON1 0x00
+#define PHSTAT1 0x01
+#define PHANA 0x04
+#define PHANLPA 0x05
+#define PHANE 0x06
+#define PHCON2 0x11
+#define PHSTAT2 0x1B
+#define PHSTAT3 0x1F
+
+/* Single-byte instructions */
+#define BXSEL(bank) (0xC0 + (bank & (BANK_MASK >> BANK_SHIFT)) * 2)
+/* Bank X Select */
+#define B0SEL 0xC0 /* Bank 0 Select */
+#define B1SEL 0xC2 /* Bank 1 Select */
+#define B2SEL 0xC4 /* Bank 2 Select */
+#define B3SEL 0xC6 /* Bank 3 Select */
+#define SETETHRST 0xCA /* System Reset */
+#define FCDISABLE 0xE0 /* Flow Control Disable */
+#define FCSINGLE 0xE2 /* Flow Control Single */
+#define FCMULTIPLE 0xE4 /* Flow Control Multiple */
+#define FCCLEAR 0xE6 /* Flow Control Clear */
+#define SETPKTDEC 0xCC /* Decrement Packet Counter */
+#define DMASTOP 0xD2 /* DMA Stop */
+#define DMACKSUM 0xD8 /* DMA Start Checksum */
+#define DMACKSUMS 0xDA /* DMA Start Checksum with Seed */
+#define DMACOPY 0xDC /* DMA Start Copy */
+#define DMACOPYS 0xDE /* DMA Start Copy and Checksum with Seed */
+#define SETTXRTS 0xD4 /* Request Packet Transmission */
+#define ENABLERX 0xE8 /* Enable RX */
+#define DISABLERX 0xEA /* Disable RX */
+#define SETEIE 0xEC /* Enable Interrupts */
+#define CLREIE 0xEE /* Disable Interrupts */
+
+/* Two byte instructions */
+#define RBSEL 0xC8 /* Read Bank Select */
+
+/* Three byte instructions */
+#define WGPRDPT 0x60 /* Write EGPRDPT */
+#define RGPRDPT 0x62 /* Read EGPRDPT */
+#define WRXRDPT 0x64 /* Write ERXRDPT */
+#define RRXRDPT 0x66 /* Read ERXRDPT */
+#define WUDARDPT 0x68 /* Write EUDARDPT */
+#define RUDARDPT 0x6A /* Read EUDARDPT */
+#define WGPWRPT 0x6C /* Write EGPWRPT */
+#define RGPWRPT 0x6E /* Read EGPWRPT */
+#define WRXWRPT 0x70 /* Write ERXWRPT */
+#define RRXWRPT 0x72 /* Read ERXWRPT */
+#define WUDAWRPT 0x74 /* Write EUDAWRPT */
+#define RUDAWRPT 0x76 /* Read EUDAWRPT */
+
+/* n byte instructions */
+#define RCR(addr) (0x00 | (addr & ADDR_MASK)) /* Read Control Register */
+#define WCR(addr) (0x40 | (addr & ADDR_MASK)) /* Write Control Register */
+#define RCRU 0x20 /* Read Control Register Unbanked */
+#define WCRU 0x22 /* Write Control Register Unbanked */
+#define BFS(addr) (0x80 | (addr & ADDR_MASK)) /* Bit Field Set */
+#define BFC(addr) (0xA0 | (addr & ADDR_MASK)) /* Bit Field Clear */
+#define BFSU 0x24 /* Bit Field Set Unbanked */
+#define BFCU 0x26 /* Bit Field Clear Unbanked */
+#define RGPDATA 0x28 /* Read EGPDATA */
+#define WGPDATA 0x2A /* Write EGPDATA */
+#define RRXDATA 0x2C /* Read ERXDATA */
+#define WRXDATA 0x2E /* Write ERXDATA */
+#define RUDADATA 0x30 /* Read EUDADATA */
+#define WUDADATA 0x32 /* Write EUDADATA */
+
+/* Register bit definitions */
+/* ESTATH */
+#define INT (1 << 7)
+#define FCIDLE (1 << 6)
+#define RXBUSY (1 << 5)
+#define CLKRDY (1 << 4)
+#define PHYDPX (1 << 2)
+#define PHYLNK (1 << 0)
+
+/* EIRH */
+/*for ease of use lets access it as a word*/
+#define CRYPTEN (1 << 15)
+#define MODEXIF (1 << 14)
+#define HASHIF (1 << 13)
+#define AESIF (1 << 12)
+#define LINKIF (1 << 11)
+
+/* EIRL */
+#define PKTIF (1 << 6)
+#define DMAIF (1 << 5)
+#define TXIF (1 << 3)
+#define TXABTIF (1 << 2)
+#define RXABTIF (1 << 1)
+#define PCFULIF (1 << 0)
+
+/* ECON1H */
+#define MODEXST (1 << 7)
+#define HASHEN (1 << 6)
+#define HASHOP (1 << 5)
+#define HASHLST (1 << 4)
+#define AESST (1 << 3)
+#define AESOP1 (1 << 2)
+#define AESOP0 (1 << 1)
+#define PKTDEC (1 << 0)
+
+/* ECON1L */
+#define FCOP1 (1 << 7)
+#define FCOP0 (1 << 6)
+#define DMAST (1 << 5)
+#define DMACPY (1 << 4)
+#define DMACSSD (1 << 3)
+#define DMANOCS (1 << 2)
+#define TXRTS (1 << 1)
+#define RXEN (1 << 0)
+
+/* ETXSTATH */
+#define LATECOL (1 << 2)
+#define MAXCOL (1 << 1)
+#define EXDEFER (1 << 0)
+
+/* ETXSTATL */
+#define ETXSTATL_DEFER (1 << 7)
+#define CRCBAD (1 << 4)
+#define COLCNT_MASK 0xF
+
+/* ERXFCONH */
+#define HTEN (1 << 7)
+#define MPEN (1 << 6)
+#define NOTPM (1 << 4)
+#define PMEN3 (1 << 3)
+#define PMEN2 (1 << 2)
+#define PMEN1 (1 << 1)
+#define PMEN0 (1 << 0)
+
+/* ERXFCONL */
+#define CRCEEN (1 << 7)
+#define CRCEN (1 << 6)
+#define RUNTEEN (1 << 5)
+#define RUNTEN (1 << 4)
+#define UCEN (1 << 3)
+#define NOTMEEN (1 << 2)
+#define MCEN (1 << 1)
+#define BCEN (1 << 0)
+/*no bytewise access*/
+/* MACON1L */
+#define LOOPBK (1 << 4)
+#define RXPAUS (1 << 2)
+#define PASSALL (1 << 1)
+
+/* MACON2 */
+#define MACON2_DEFER (1 << 14)
+#define BPEN (1 << 13)
+#define NOBKOFF (1 << 12)
+#define PADCFG2 (1 << 7)
+#define PADCFG1 (1 << 6)
+#define PADCFG0 (1 << 5)
+#define TXCRCEN (1 << 4)
+#define PHDREN (1 << 3)
+#define HFRMEN (1 << 2)
+#define FULDPX (1 << 0)
+
+/* MAIPG */
+/* value of the high byte is given by the reserved bits,
+* value of the low byte is recomended setting of the
+* IPG parameter.
+*/
+#define MAIPGH_VAL 0x0C
+#define MAIPGL_VAL 0x12
+
+/* MIREGADRH */
+#define MIREGADRH_VAL 0x01
+
+/* MIREGADRL */
+#define PHREG_MASK 0x1F
+
+/* MICMDL */
+#define MIISCAN (1 << 1)
+#define MIIRD (1 << 0)
+
+/* MISTATL */
+#define NVALID (1 << 2)
+#define SCAN (1 << 1)
+#define BUSY (1 << 0)
+
+/* ECON2H */
+#define ETHEN (1 << 7)
+#define STRCH (1 << 6)
+#define TXMAC (1 << 5)
+#define SHA1MD5 (1 << 4)
+#define COCON3 (1 << 3)
+#define COCON2 (1 << 2)
+#define COCON1 (1 << 1)
+#define COCON0 (1 << 0)
+
+/* ECON2L */
+#define AUTOFC (1 << 7)
+#define TXRST (1 << 6)
+#define RXRST (1 << 5)
+#define ETHRST (1 << 4)
+#define MODLEN1 (1 << 3)
+#define MODLEN0 (1 << 2)
+#define AESLEN1 (1 << 1)
+#define AESLEN0 (1 << 0)
+
+/* EIEH */
+#define INTIE (1 << 7)
+#define MODEXIE (1 << 6)
+#define HASHIE (1 << 5)
+#define AESIE (1 << 4)
+#define LINKIE (1 << 3)
+
+/* EIEL */
+#define PKTIE (1 << 6)
+#define DMAIE (1 << 5)
+#define TXIE (1 << 3)
+#define TXABTIE (1 << 2)
+#define RXABTIE (1 << 1)
+#define PCFULIE (1 << 0)
+
+/* EIDLEDH */
+#define LACFG3 (1 << 7)
+#define LACFG2 (1 << 6)
+#define LACFG1 (1 << 5)
+#define LACFG0 (1 << 4)
+#define LBCFG3 (1 << 3)
+#define LBCFG2 (1 << 2)
+#define LBCFG1 (1 << 1)
+#define LBCFG0 (1 << 0)
+
+/* EIDLEDL */
+#define DEVID_SHIFT 5
+#define DEVID_MASK (0x7 << DEVID_SHIFT)
+#define REVID_SHIFT 0
+#define REVID_MASK (0x1F << REVID_SHIFT)
+
+/* PHANA */
+/* Default value for PHY initialization*/
+#define PHANA_DEFAULT 0x05E1
+
+/* PHCON1 */
+#define PRST (1 << 15)
+#define PLOOPBK (1 << 14)
+#define SPD100 (1 << 13)
+#define ANEN (1 << 12)
+#define PSLEEP (1 << 11)
+#define RENEG (1 << 9)
+#define PFULDPX (1 << 8)
+
+/* PHSTAT */
+#define FULL100 (1 << 14)
+#define HALF100 (1 << 13)
+#define FULL10 (1 << 12)
+#define HALF10 (1 << 11)
+#define ANDONE (1 << 5)
+#define LRFAULT (1 << 4)
+#define ANABLE (1 << 3)
+#define LLSTAT (1 << 2)
+#define EXTREGS (1 << 0)
+
+#define EUDAST_TEST_VAL 0x1234
+
+#define TSV_SIZE 7
+
+#define ENC424J600_DEV_ID 0x1
+
+/* Configuration */
+
+/* Led is on when the link is present and driven low
+* temporarily when packet is TX'd or RX'd */
+#define LED_A_SETTINGS 0xC
+
+/* Led is on if the link is in 100 Mbps mode */
+#define LED_B_SETTINGS 0x8
+
+/* maximum ethernet frame length
+* Currently not used as a limit anywhere
+* (we're using the "huge frame enable" feature of
+* enc424j600). */
+#define MAX_FRAMELEN 1518
+
+/* Size in bytes of the receive buffer in enc424j600.
+* Must be word aligned (even).
+*/
+#define RX_BUFFER_SIZE (15 * MAX_FRAMELEN)
+
+/* Start of the general purpose area in sram */
+#define SRAM_GP_START 0x0
+
+/* SRAM size */
+#define SRAM_SIZE 0x6000
+
+/* Start of the receive buffer */
+#define ERXST_VAL (SRAM_SIZE - RX_BUFFER_SIZE)
+
+#define RSV_RXLONGEVDROPEV 16
+#define RSV_CARRIEREV 18
+#define RSV_CRCERROR 20
+#define RSV_LENCHECKERR 21
+#define RSV_LENOUTOFRANGE 22
+#define RSV_RXOK 23
+#define RSV_RXMULTICAST 24
+#define RSV_RXBROADCAST 25
+#define RSV_DRIBBLENIBBLE 26
+#define RSV_RXCONTROLFRAME 27
+#define RSV_RXPAUSEFRAME 28
+#define RSV_RXUNKNOWNOPCODE 29
+#define RSV_RXTYPEVLAN 30
+
+#define RSV_RUNTFILTERMATCH 31
+#define RSV_NOTMEFILTERMATCH 32
+#define RSV_HASHFILTERMATCH 33
+#define RSV_MAGICPKTFILTERMATCH 34
+#define RSV_PTRNMTCHFILTERMATCH 35
+#define RSV_UNICASTFILTERMATCH 36
+
+#define RSV_SIZE 8
+#define RSV_BITMASK(x) (1 << ((x) - 16))
+#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0)
+
+/* Put RX buffer at 0 as suggested by the Errata datasheet */
+
+#define RXSTART_INIT ERXST_VAL
+#define RXEND_INIT 0x5FFF
+
+#endif
diff -uprN -X a/Documentation/dontdiff a/drivers/net/Kconfig
b/drivers/net/Kconfig
--- a/drivers/net/Kconfig 2010-07-05 22:41:43.000000000 +0530
+++ b/drivers/net/Kconfig 2011-01-16 15:26:16.000000000 +0530
@@ -973,6 +973,16 @@ config ENC28J60_WRITEVERIFY
Enable the verify after the buffer write useful for debugging purpose.
If unsure, say N.
+config ENC424J600
+ tristate "ENC424J600 support"
+ depends on EXPERIMENTAL && SPI && NET_ETHERNET
+ select CRC32
+ ---help---
+ Support for the Microchip EN424J600 ethernet chip.
+
+ To compile this driver as a module, choose M here. The module will be
+ called enc424j600.
+
config ETHOC
tristate "OpenCores 10/100 Mbps Ethernet MAC support"
depends on NET_ETHERNET && HAS_IOMEM
diff -uprN -X a/Documentation/dontdiff a/drivers/net/Makefile
b/drivers/net/Makefile
--- a/drivers/net/Makefile 2010-07-05 22:41:43.000000000 +0530
+++ b/drivers/net/Makefile 2011-01-05 21:46:57.000000000 +0530
@@ -240,6 +240,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_d
pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
+obj-$(CONFIG_ENC424J600) += enc424j600.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
2011-01-30 10:14 ` Balaji Venkatachalam
@ 2011-01-30 11:55 ` Francois Romieu
2011-01-30 12:01 ` David Miller
0 siblings, 1 reply; 14+ messages in thread
From: Francois Romieu @ 2011-01-30 11:55 UTC (permalink / raw)
To: Balaji Venkatachalam
Cc: netdev, mirqus, mohan, blue.cube, lanconelli.claudio, sriram,
David Miller, vbalaji.acs
Balaji Venkatachalam <balaji.v@thotakaa.com> :
> From: Balaji Venkatachalam <balaji.v@thotakaa.com>
> Updated patch [V1.29] for Microchip enc424j600 ethernet chip controlled via SPI.
>
> I tested it on my custom board with ARM9 (Freescale i.MX233) with
> Kernel 2.6.31.14.
[...]
> 4. mapped enc424j600_dump_regs to eth_ops get_regs
There is some kind of misunderstanding.
See include/linux/ethtool.h
[...]
struct ethtool_ops {
int (*get_settings)(struct net_device *, struct ethtool_cmd *);
int (*set_settings)(struct net_device *, struct ethtool_cmd *);
void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
int (*get_regs_len)(struct net_device *);
void (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
It should not even compile.
--
Ueimor
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
2011-01-30 11:55 ` Francois Romieu
@ 2011-01-30 12:01 ` David Miller
[not found] ` <AANLkTimC3bsvT24cz4A+iJfjgL3LxBWxKzb182ocqbiL@mail.gmail.com>
0 siblings, 1 reply; 14+ messages in thread
From: David Miller @ 2011-01-30 12:01 UTC (permalink / raw)
To: romieu
Cc: balaji.v, netdev, mirqus, mohan, blue.cube, lanconelli.claudio,
sriram, vbalaji.acs
From: Francois Romieu <romieu@fr.zoreil.com>
Date: Sun, 30 Jan 2011 12:55:16 +0100
> Balaji Venkatachalam <balaji.v@thotakaa.com> :
>> From: Balaji Venkatachalam <balaji.v@thotakaa.com>
>> Updated patch [V1.29] for Microchip enc424j600 ethernet chip controlled via SPI.
>>
>> I tested it on my custom board with ARM9 (Freescale i.MX233) with
>> Kernel 2.6.31.14.
> [...]
>> 4. mapped enc424j600_dump_regs to eth_ops get_regs
>
> There is some kind of misunderstanding.
>
> See include/linux/ethtool.h
> [...]
> struct ethtool_ops {
> int (*get_settings)(struct net_device *, struct ethtool_cmd *);
> int (*set_settings)(struct net_device *, struct ethtool_cmd *);
> void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
> int (*get_regs_len)(struct net_device *);
> void (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
>
> It should not even compile.
Balaji, please take care of your changes and do not rush this review
process like you seem to be doing.
If you're not even watching for compiler warnings and errors, I can
expect that you did exaclty zero functional testing of the changed
code.
That's simply unacceptable.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
[not found] ` <AANLkTimC3bsvT24cz4A+iJfjgL3LxBWxKzb182ocqbiL@mail.gmail.com>
@ 2011-01-30 12:34 ` Balaji Venkatachalam
2011-02-08 14:48 ` Balaji Venkatachalam
0 siblings, 1 reply; 14+ messages in thread
From: Balaji Venkatachalam @ 2011-01-30 12:34 UTC (permalink / raw)
To: David Miller
Cc: romieu, netdev, mirqus, mohan, blue.cube, lanconelli.claudio,
sriram, vbalaji.acs
I am extremely sorry, for having overlooked the details. It is not my
intent to rush through the review process. I hold the reviewers time
and feedback valuable and will ensure that this will not repeat again.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
2011-01-30 12:34 ` Balaji Venkatachalam
@ 2011-02-08 14:48 ` Balaji Venkatachalam
2011-02-23 6:00 ` Balaji Venkatachalam
0 siblings, 1 reply; 14+ messages in thread
From: Balaji Venkatachalam @ 2011-02-08 14:48 UTC (permalink / raw)
To: netdev; +Cc: mohan, blue.cube, lanconelli.claudio, sriram, vbalaji.acs
From: Balaji Venkatachalam <balaji.v@thotakaa.com>
Updated patch [1.30] for Microchip enc424j600 ethernet chip controlled via SPI.
I tested it on my custom board with ARM9 (Freescale i.MX233) with
Kernel 2.6.31.14.
I tested the corrected get_regs implementation with ethtool using the command:
"ethtool -d eth0".
It gives output in "Offset Value" format.
Changes done since V1.29 to V1.30
1. Fixed Compiler Warning due to wrong get_regs implementation
2. added enc424j600_get_regs, get_regs functionality
for use with ethtool.
3. removed unnecessary & unformatted comments
4. replaced enc424j600_set_bits and enc424j600_clear_bits with
enc424j600_write_bits.
5. removed unnecessary empty lines.
Changes done since V1.28 to V1.29
1. enc424j600_spi_trans function implementation optimized
2. Unnecessary comments and Improper Comments removed
3. Added an empty line after variable declaration in all functions
4. mapped enc424j600_dump_regs to eth_ops get_regs
5. removed the hardcoding of return type in enc424j600_probe function
Changes done since V1.27 to V1.28
1. did some code formatting
Changes done since V1.24 to V1.27
1. Timeout Mechanism implemented for enc424j600_soft_reset function
2. Timeout Mechanism implemented for enc424j600_wait_for_autoneg function
3. Window Naming changed to enum
4. Removed WRITEVERIFY functionality
Todo List:
1. Low Power Mode Functionality implementation
2. Provide Support for On-Chip DMA
3. Remove mutex_lock wherever not required
Any comments are welcome.
Signed-off-by: Balaji Venkatachalam <balaji.v@thotakaa.com>
---
diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600.c
b/drivers/net/enc424j600.c
--- a/drivers/net/enc424j600.c 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/enc424j600.c 2011-02-08 20:10:26.000000000 +0530
@@ -0,0 +1,1748 @@
+/*
+ * Microchip ENC424J600 ethernet driver (MAC + PHY) on SPI bus
+ *
+ * Copyright (C) 2011 Thotaka Technologies Pvt Ltd
+ * Author: Balaji Venkatachalam <balaji.v@thotakaa.com>
+ * based on enc424j600.c written by Kuba Marek
+ * based on enc28j60.c written by Claudio Lanconelli
+ *
+ * Changes done since V1.29 to V1.30
+ * 1. Fixed Compiler Warning due to wrong get_regs implementation
+ * 2. added enc424j600_get_regs, get_regs functionality
+ * for use with ethtool.
+ * 3. removed unnecessary & unformatted comments
+ * 4. replaced enc424j600_set_bits and enc424j600_clear_bits with
+ * enc424j600_write_bits.
+ * 5. removed unnecessary empty lines.
+ *
+ * Changes done since V1.28 to V1.29
+ * 1. enc424j600_spi_trans function implementation optimized
+ * 2. Unnecessary comments and Improper Comments removed
+ * 3. Added an empty line after variable declaration in all functions
+ * 4. mapped enc424j600_dump_regs to eth_ops get_regs
+ * 5. removed the hardcoding of return type in enc424j600_probe function
+ *
+ * Changes done since V1.27 to V1.28
+ * 1. did some code formatting
+ *
+ * Changes done since V1.24 to V1.27
+ * 1. Timeout Mechanism implemented for enc424j600_soft_reset function
+ * 2. Timeout Mechanism implemented for enc424j600_wait_for_autoneg function
+ * 3. Window Naming changed to enum
+ * 4. Removed WRITEVERIFY functionality
+ *
+ * Todo List:
+ * 1. Low Power Mode Functionality implementation
+ * 2. Provide Support for On-Chip DMA
+ * 3. Remove mutex_lock wherever not required
+ * 4. Propogate the return status code of enc424j600_hw_init
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+
+#include "enc424j600_hw.h"
+
+#define DRV_NAME "enc424j600"
+#define DRV_VERSION "1.30"
+
+#define ENC424J600_MSG_DEFAULT \
+ (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
+
+#define SPI_TRANSFER_BUF_LEN (4 + MAX_FRAMELEN)
+#define TX_TIMEOUT (4 * HZ)
+
+/* Max TX retries in case of collision as suggested by errata datasheet */
+#define MAX_TX_RETRYCOUNT 16
+
+#define SPI_OPLEN 1
+
+#define SRAMSIZE 0x6000
+#define TXSTART 0x0000
+#define RXSTART 0x1600
+
+/* Enable SPI DMA. Default: 0 (Off) */
+static int enc424j600_enable_dma;
+
+enum {
+ RXFILTER_NORMAL,
+ RXFILTER_MULTI,
+ RXFILTER_PROMISC
+};
+enum {
+ RXWINDOW,
+ USERWINDOW,
+ GPWINDOW
+};
+
+/* Driver local data */
+struct enc424j600_net {
+ struct net_device *netdev;
+ struct spi_device *spi;
+ struct mutex lock;
+ struct sk_buff *tx_skb;
+ struct work_struct tx_work;
+ struct work_struct irq_work;
+ struct work_struct setrx_work;
+ struct work_struct restart_work;
+ u8 bank; /* current register bank selected */
+ u16 next_pk_ptr; /* next packet pointer within FIFO */
+ u16 max_pk_counter; /* statistics: max packet counter */
+ u16 tx_retry_count;
+ bool hw_enable;
+ bool full_duplex;
+ bool autoneg;
+ bool speed100;
+ int rxfilter;
+ u32 msg_enable;
+
+ u8 *spi_rx_buf;
+ u8 *spi_tx_buf;
+ dma_addr_t spi_tx_dma;
+ dma_addr_t spi_rx_dma;
+};
+
+/* use ethtool to change the level for any given device */
+static struct {
+ u32 msg_enable;
+} debug = { -1 };
+
+static int enc424j600_spi_trans(struct enc424j600_net *priv, int len)
+{
+ /*modified to suit half duplexed spi */
+ struct spi_transfer tt = {
+ .tx_buf = priv->spi_tx_buf,
+ .len = SPI_OPLEN,
+ };
+ struct spi_transfer tr = {
+ .rx_buf = priv->spi_rx_buf,
+ .len = len,
+ };
+ struct spi_message m;
+ int ret;
+
+ spi_message_init(&m);
+
+ spi_message_add_tail(&tt, &m);
+ spi_message_add_tail(&tr, &m);
+
+ ret = spi_sync(priv->spi, &m);
+
+ if (ret) {
+ dev_err(&priv->spi->dev,
+ "spi transfer failed: ret = %d\n", ret);
+ goto out;
+ }
+
+ memcpy(priv->spi_rx_buf, tr.rx_buf, len);
+
+out:
+ return ret;
+}
+
+/*Read data from chip SRAM.*/
+static int enc424j600_read_sram(struct enc424j600_net *priv,
+ u8 *dst, int len, u16 srcaddr, int window)
+{
+ int ret;
+
+ if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+ return -EINVAL;
+
+ /* First set the write pointer as per selected window */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXRDPT;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDARDPT;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPRDPT;
+
+ priv->spi_tx_buf[1] = srcaddr & 0xFF;
+ priv->spi_tx_buf[2] = srcaddr >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+
+ /* Transfer the data */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = RRXDATA;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = RUDADATA;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = RGPDATA;
+
+ ret = enc424j600_spi_trans(priv, len + 1);
+
+ /* Copy the data from the rx buffer */
+ memcpy(dst, &priv->spi_rx_buf[0], len);
+
+ return ret;
+}
+
+/* Write data to chip SRAM.*/
+static int enc424j600_write_sram(struct enc424j600_net *priv,
+ const u8 *src, int len, u16 dstaddr,
+ int window)
+{
+ int ret;
+
+ if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+ return -EINVAL;
+
+ /* First set the general purpose write pointer */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXWRPT;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDAWRPT;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPWRPT;
+
+ priv->spi_tx_buf[1] = dstaddr & 0xFF;
+ priv->spi_tx_buf[2] = dstaddr >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+
+ /* Copy the data to the tx buffer */
+ memcpy(&priv->spi_tx_buf[1], src, len);
+
+ /* Transfer the data */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXDATA;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDADATA;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPDATA;
+
+ ret = spi_write(priv->spi, priv->spi_tx_buf, len + 1);
+
+ return ret;
+}
+
+/* Select the current register bank if necessary to be able to read @addr.*/
+static void enc424j600_set_bank(struct enc424j600_net *priv, u8 addr)
+{
+ u8 b = (addr & BANK_MASK) >> BANK_SHIFT;
+
+ /* These registers are present in all banks, no need to switch bank */
+ if (addr >= EUDASTL && addr <= ECON1H)
+ return;
+ if (priv->bank == b)
+ return;
+
+ priv->spi_tx_buf[0] = BXSEL(b);
+
+ enc424j600_spi_trans(priv, 1);
+ priv->bank = b;
+}
+
+/* sets and clears SFR registers */
+static void enc424j600_write_bits(struct enc424j600_net *priv, u8 addr,
+ u8 bits, u8 mask)
+{
+ enc424j600_set_bank(priv, addr);
+ priv->spi_tx_buf[0] = bits;
+ priv->spi_tx_buf[1] = mask;
+ spi_write(priv->spi, priv->spi_tx_buf, 2);
+}
+
+/* Write a 8bit special function register.
+ The @sfr parameters takes address of the register.*/
+static int enc424j600_write_8b_sfr(struct enc424j600_net *priv, u8
sfr, u8 data)
+{
+ int ret;
+
+ enc424j600_set_bank(priv, sfr);
+ priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = data & 0xFF;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 2);
+
+ return ret;
+}
+
+/* Read a 8bit special function register.
+ The @sfr parameters takes address of the register.*/
+static int enc424j600_read_8b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u8 *data)
+{
+ int ret;
+
+ enc424j600_set_bank(priv, sfr);
+ priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
+ ret = enc424j600_spi_trans(priv, 2);
+ *data = priv->spi_rx_buf[0];
+
+ return ret;
+}
+
+/* Write a 16bit special function register.
+ The @sfr parameters takes address of the low byte of the register.
+ Takes care of the endiannes & buffers.*/
+static int enc424j600_write_16b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u16 data)
+{
+ int ret;
+
+ enc424j600_set_bank(priv, sfr);
+ priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = data & 0xFF;
+ priv->spi_tx_buf[2] = data >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+ if (ret && netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
+ __func__, ret);
+
+ return ret;
+}
+
+/*Read a 16bit special function register.
+ The @sfr parameters takes address of the low byte of the register.
+ Takes care of the endiannes & buffers. */
+static int enc424j600_read_16b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u16 *data)
+{
+ int ret;
+
+ enc424j600_set_bank(priv, sfr);
+ priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = 0;
+ priv->spi_tx_buf[2] = 0;
+ priv->spi_tx_buf[3] = 0;
+ ret = enc424j600_spi_trans(priv, 3);
+ *data = priv->spi_rx_buf[0] | priv->spi_rx_buf[1] << (u16) 8;
+
+ return ret;
+}
+
+static unsigned long msec20_to_jiffies;
+
+/*Wait for bits in register to become equal to @readyMask, but at most 20ms.*/
+static int checktimeout_16bit(struct enc424j600_net *priv,
+ u8 reg, u16 mask, u16 readyMask)
+{
+ unsigned long timeout = jiffies + msec20_to_jiffies;
+ u16 value;
+
+ /* 20 msec timeout read */
+ enc424j600_read_16b_sfr(priv, reg, &value);
+ while ((value & mask) != readyMask) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_read_16b_sfr(priv, reg, &value);
+ }
+
+ return 0;
+}
+
+/* wait 20 ms for (value&mask) to become readyMask*/
+static int checktimeout_8bit(struct enc424j600_net *priv,
+ u8 reg, u8 mask, u8 readyMask)
+{
+ unsigned long timeout = jiffies + msec20_to_jiffies;
+ u8 value;
+
+ /* 20 msec timeout read */
+ enc424j600_read_8b_sfr(priv, reg, &value);
+ while ((value & mask) != readyMask) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_read_8b_sfr(priv, reg, &value);
+ }
+
+ return 0;
+}
+
+/* Reset the enc424j600.*/
+static int enc424j600_soft_reset(struct enc424j600_net *priv)
+{
+ int ret;
+ u16 eudast;
+
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ enc424j600_write_16b_sfr(priv, EUDASTL, EUDAST_TEST_VAL);
+ ret = checktimeout_16bit(priv, EUDASTL, 0xFFFF, EUDAST_TEST_VAL);
+ if (ret != 0)
+ return ret;
+ ret = checktimeout_16bit(priv, ESTATH, CLKRDY, CLKRDY);
+ if (ret != 0)
+ return ret;
+
+ priv->spi_tx_buf[0] = SETETHRST;
+ enc424j600_spi_trans(priv, 1);
+ /*inline with the datasheet */
+ udelay(25);
+
+ enc424j600_read_16b_sfr(priv, EUDASTL, &eudast);
+ if (netif_msg_hw(priv) && eudast != 0)
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() EUDASTL is not zero!\n", __func__);
+ /*inline with the datasheet */
+ /*datasheet says to wait for 256 usec atleast */
+ udelay(300);
+ return 0;
+}
+
+/*
+ * PHY register read
+ * PHY registers are not accessed directly, but through the MII
+ */
+static int enc424j600_phy_read(struct enc424j600_net *priv,
+ u16 address, u16 *data)
+{
+ int ret;
+
+ enc424j600_write_16b_sfr(priv, MIREGADRL,
+ address | (MIREGADRH_VAL << 8));
+ enc424j600_write_16b_sfr(priv, MICMDL, MIIRD);
+ udelay(26);
+ ret = !checktimeout_8bit(priv, MISTATL, BUSY, 0);
+ enc424j600_write_16b_sfr(priv, MICMDL, 0);
+ enc424j600_read_16b_sfr(priv, MIRDL, data);
+ return ret;
+}
+
+static int enc424j600_phy_write(struct enc424j600_net *priv, u16 address,
+ u16 data)
+{
+ enc424j600_write_16b_sfr(priv, MIREGADRL,
+ address | (MIREGADRH_VAL << 8));
+ enc424j600_write_16b_sfr(priv, MIWRL, data);
+ udelay(26);
+ return !checktimeout_8bit(priv, MISTATL, BUSY, 0);
+}
+
+/* Read the hardware MAC address to dev->dev_addr. */
+static int enc424j600_get_hw_macaddr(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ u16 maadr1, maadr2, maadr3;
+
+ mutex_lock(&priv->lock);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MAC address to %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ enc424j600_read_16b_sfr(priv, MAADR3L, &maadr3);
+ ndev->dev_addr[5] = maadr3 >> 8;
+ ndev->dev_addr[4] = maadr3 & 0xff;
+ enc424j600_read_16b_sfr(priv, MAADR2L, &maadr2);
+ ndev->dev_addr[3] = maadr2 >> 8;
+ ndev->dev_addr[2] = maadr2 & 0xff;
+ enc424j600_read_16b_sfr(priv, MAADR1L, &maadr1);
+ ndev->dev_addr[1] = maadr1 >> 8;
+ ndev->dev_addr[0] = maadr1 & 0xff;
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+/* Program the hardware MAC address from dev->dev_addr.*/
+static int enc424j600_set_hw_macaddr(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+
+ mutex_lock(&priv->lock);
+
+ if (priv->hw_enable) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() Hardware must be disabled to set "
+ "Mac address\n", __func__);
+ mutex_unlock(&priv->lock);
+ return -EBUSY;
+ }
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MAC address to %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ enc424j600_write_16b_sfr(priv, MAADR3L,
+ ndev->dev_addr[4] | ndev->dev_addr[5] << 8);
+ enc424j600_write_16b_sfr(priv, MAADR2L,
+ ndev->dev_addr[2] | ndev->dev_addr[3] << 8);
+ enc424j600_write_16b_sfr(priv, MAADR1L,
+ ndev->dev_addr[0] | ndev->dev_addr[1] << 8);
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+/* Store the new hardware address in dev->dev_addr, and update the MAC.*/
+static int enc424j600_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *address = addr;
+
+ if (netif_running(dev))
+ return -EBUSY;
+ if (!is_valid_ether_addr(address->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
+ return enc424j600_set_hw_macaddr(dev);
+}
+
+u8 nolock_regb_read(struct enc424j600_net *priv, u8 address)
+{
+ u8 data;
+
+ enc424j600_read_8b_sfr(priv, address, &data);
+ return data;
+}
+
+u16 nolock_regw_read(struct enc424j600_net *priv, u8 address)
+{
+ u16 data;
+
+ enc424j600_read_16b_sfr(priv, address, &data);
+ return data;
+}
+
+/*Debug routine to dump useful register contents*/
+static void enc424j600_dump_regs(struct enc424j600_net *priv, const char *msg)
+{
+ mutex_lock(&priv->lock);
+ printk(KERN_DEBUG DRV_NAME " %s\n"
+ "Cntrl: ECON1H ECON1L ECON2H ECON2L ESTATH ESTATL EIRH "
+ "EIRL EIEH EIEL\n"
+ " 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x "
+ "0x%02x 0x%02x 0x%02x 0x%02x\n"
+ "MAC : MACON1 MACON2\n"
+ " 0x%04x 0x%04x\n"
+ "Rx : ERXST ERXTAIL ERXHEAD ERXWRPT ERXRDPT ERXFCON MAMXFL\n"
+ " 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n"
+ "Tx : ETXST ETXLEN MACLCON1 \n"
+ " 0x%04x 0x%04x 0x%02x\n",
+ msg,
+ nolock_regb_read(priv, ECON1H), nolock_regb_read(priv, ECON1L),
+ nolock_regb_read(priv, ECON2H), nolock_regb_read(priv, ECON2L),
+ nolock_regb_read(priv, ESTATH), nolock_regb_read(priv, ESTATL),
+ nolock_regb_read(priv, EIRH), nolock_regb_read(priv, EIRL),
+ nolock_regb_read(priv, EIEH), nolock_regb_read(priv, EIEL),
+ nolock_regw_read(priv, MACON1L), nolock_regw_read(priv, MACON2L),
+ nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXTAILL),
+ nolock_regw_read(priv, ERXHEADL),
+ nolock_regw_read(priv, ERXWRPTL), nolock_regw_read(priv,
+ ERXRDPTL),
+ nolock_regw_read(priv, ERXFCONL), nolock_regw_read(priv,
+ MAMXFLL),
+ nolock_regw_read(priv, ETXSTL), nolock_regw_read(priv, ETXLENL),
+ nolock_regw_read(priv, MACLCONL));
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * TODO: Check the functionality
+ * Low power mode shrinks power consumption about 100x, so we'd like
+ * the chip to be in that mode whenever it's inactive. (However, we
+ * can't stay in lowpower mode during suspend with WOL active.)
+ */
+static void enc424j600_lowpower(struct enc424j600_net *priv, bool is_low)
+{
+
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev, "%s power...\n",
+ is_low ? "low" : "high");
+
+#if 0
+ mutex_lock(&priv->lock);
+ if (is_low) {
+ nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+ checktimeout_8bit(priv, ESTAT, ESTAT_RXBUSY, 0);
+ checktimeout_8bit(priv, ECON1, ECON1_TXRTS, 0);
+ /* ECON2_VRPS was set during initialization */
+ nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
+ } else {
+ nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
+ checktimeout_8bit(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
+ /* caller sets ECON1_RXEN */
+ }
+ mutex_unlock(&priv->lock);
+#endif
+}
+
+static unsigned long msec2000_to_jiffies;
+/* Waits for autonegotiation to complete. */
+static int enc424j600_wait_for_autoneg(struct enc424j600_net *priv)
+{
+ unsigned long timeout = jiffies + msec2000_to_jiffies;
+ u16 value;
+
+ /* 20 msec timeout read */
+ enc424j600_phy_read(priv, PHSTAT1, &value);
+ while ((value & ANDONE) == 0) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", PHSTAT1);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_phy_read(priv, PHSTAT1, &value);
+ }
+ return 0;
+}
+
+/*
+ * Reset and initialize the chip, but don't enable interrupts and don't
+ * start receiving yet.
+ */
+static int enc424j600_hw_init(struct enc424j600_net *priv)
+{
+ u8 eidledl;
+ u16 phcon1;
+ u16 macon2;
+ u16 econ1l;
+
+ /*priv->autoneg = AUTONEG_ENABLE; */
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
+ priv->autoneg ? "Autoneg" : (priv->
+ full_duplex ? "FullDuplex" : "HalfDuplex"));
+
+ mutex_lock(&priv->lock);
+
+ priv->bank = 0;
+ priv->hw_enable = false;
+ priv->tx_retry_count = 0;
+ priv->max_pk_counter = 0;
+ priv->rxfilter = RXFILTER_NORMAL;
+
+ if (enc424j600_soft_reset(priv) != 0)
+ return 0;
+
+ /* Check the device id and silicon revision id. */
+ enc424j600_read_8b_sfr(priv, EIDLEDL, &eidledl);
+
+ if ((eidledl & DEVID_MASK) >> DEVID_SHIFT != ENC424J600_DEV_ID) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() Invalid device ID: %d\n", __func__,
+ (eidledl & DEVID_MASK) >> DEVID_SHIFT);
+ return 0;
+ }
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME ": Silicon revision ID: 0x%02x\n",
+ (eidledl & REVID_MASK) >> REVID_SHIFT);
+
+ enc424j600_write_16b_sfr(priv, ETXSTL, TXSTART);
+ enc424j600_write_16b_sfr(priv, ERXSTL, RXSTART);
+
+ priv->next_pk_ptr = RXSTART;
+ enc424j600_write_16b_sfr(priv, ERXTAILL, SRAMSIZE - 2);
+ enc424j600_write_16b_sfr(priv, ERXFCONL, UCEN | BCEN | CRCEN | RUNTEN);
+
+ enc424j600_phy_write(priv, PHANA, PHANA_DEFAULT);
+
+ /* PHCON1 */
+ phcon1 = 0;
+ if (priv->autoneg) {
+ /* Enable autonegotiation and renegotiate */
+ phcon1 |= ANEN | RENEG;
+ } else {
+ if (priv->speed100)
+ phcon1 |= SPD100;
+ if (priv->full_duplex)
+ phcon1 |= PFULDPX;
+ }
+ enc424j600_phy_write(priv, PHCON1, phcon1);
+
+ /* MACON2
+ * defer transmission if collision occurs (only for half duplex)
+ * pad to 60 or 64 bytes and append CRC
+ * enable receiving huge frames (instead of limiting packet size) */
+ macon2 = MACON2_DEFER | PADCFG2 | PADCFG0 | TXCRCEN | HFRMEN;
+
+ /* If autonegotiation is enabled, we have to wait untill it finishes
+ * and set the PHYDPX bit in MACON2 correctly */
+ if (priv->autoneg) {
+ u8 estath;
+ if (!enc424j600_wait_for_autoneg(priv)) {
+ /* read the PHYDPX bit in ESTAT and set FULDPX in
+ MACON2 accordingly */
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ if (estath & PHYDPX)
+ macon2 |= FULDPX;
+ } else /*if timedout, just disable autoneg */
+ priv->autoneg = AUTONEG_DISABLE;
+ } else if (priv->full_duplex)
+ macon2 |= FULDPX;
+
+ enc424j600_write_16b_sfr(priv, MACON2L, macon2);
+
+ /* MAIPGL
+ * Recomended values for inter packet gaps */
+ if (!priv->autoneg) {
+ enc424j600_write_16b_sfr(priv, MAIPGL,
+ MAIPGL_VAL | (MAIPGH_VAL << 8));
+ }
+
+ /*
+ * Select enabled interrupts, but don't set the global
+ * interrupt enable flag.
+ */
+
+ enc424j600_write_16b_sfr(priv, EIEL,
+ LINKIE << 8 | PKTIE | DMAIE | TXIE | TXABTIE |
+ RXABTIE);
+
+ enc424j600_read_16b_sfr(priv, ECON1L, &econ1l);
+ econ1l |= (RXEN);
+ enc424j600_write_16b_sfr(priv, ECON1L, econ1l);
+
+ mutex_unlock(&priv->lock);
+
+ if (netif_msg_hw(priv))
+ enc424j600_dump_regs(priv, "Hw initialized.");
+
+ return 1;
+}
+
+static void enc424j600_hw_enable(struct enc424j600_net *priv)
+{
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
+ __func__);
+
+ mutex_lock(&priv->lock);
+
+ /* Clear any pending interrupts */
+ enc424j600_write_16b_sfr(priv, EIRL, 0);
+
+ /* Enable global interrupt flag */
+ enc424j600_write_bits(priv, EIEH, BFS(EIEH), INTIE);
+
+ /* enable receive logic */
+ enc424j600_write_bits(priv, ECON1L, BFS(ECON1L), RXEN);
+ priv->hw_enable = true;
+ mutex_unlock(&priv->lock);
+}
+
+static void enc424j600_hw_disable(struct enc424j600_net *priv)
+{
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() disabling interrupts.\n",
+ __func__);
+
+ mutex_lock(&priv->lock);
+
+ /* disable receive logic */
+ enc424j600_write_bits(priv, ECON1L, BFC(ECON1L), RXEN);
+
+ /* Disable global interrupt flag */
+ enc424j600_write_bits(priv, EIEH, BFC(EIEH), INTIE);
+
+ priv->hw_enable = false;
+
+ mutex_unlock(&priv->lock);
+}
+
+static int
+enc424j600_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ int ret = 0;
+
+ if (!priv->hw_enable) {
+ /* link is in low power mode now; duplex setting
+ * will take effect on next enc424j600_hw_init().
+ */
+ if (speed == SPEED_10 || speed == SPEED_100) {
+ priv->autoneg = (autoneg == AUTONEG_ENABLE);
+ priv->full_duplex = (duplex == DUPLEX_FULL);
+ priv->speed100 = (speed == SPEED_100);
+ } else {
+ if (netif_msg_link(priv))
+ dev_warn(&ndev->dev,
+ "unsupported link setting\n");
+ /*speeds other than SPEED_10 and SPEED_100 */
+ /*are not supported by chip */
+ ret = -EOPNOTSUPP;
+ }
+ } else {
+ if (netif_msg_link(priv))
+ dev_warn(&ndev->dev, "Warning: hw must be disabled "
+ "to set link mode\n");
+ ret = -EBUSY;
+ }
+ return ret;
+}
+
+/*
+ * Receive Status vector
+ */
+static void enc424j600_dump_rsv(struct enc424j600_net *priv, const char *msg,
+ u16 pk_ptr, int len, u16 sts)
+{
+ printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
+ msg, pk_ptr);
+ printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
+ RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
+ printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
+ " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
+ RSV_GETBIT(sts, RSV_CRCERROR),
+ RSV_GETBIT(sts, RSV_LENCHECKERR),
+ RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
+ printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
+ "LongDropEvent: %d, CarrierEvent: %d\n",
+ RSV_GETBIT(sts, RSV_RXMULTICAST),
+ RSV_GETBIT(sts, RSV_RXBROADCAST),
+ RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
+ RSV_GETBIT(sts, RSV_CARRIEREV));
+ printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
+ " UnknownOp: %d, VLanTagFrame: %d\n",
+ RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
+ RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
+ RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
+ RSV_GETBIT(sts, RSV_RXTYPEVLAN));
+}
+
+static void dump_packet(const char *msg, int len, const char *data)
+{
+
+ printk(KERN_ALERT ": %s - packet len:%d\n", msg, len);
+ print_hex_dump(KERN_ALERT, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
+ data, len, true);
+}
+
+/*
+ * Calculate wrap around when reading beyond the end of the RX buffer
+ */
+static u16 rx_packet_start(u16 ptr)
+{
+ if (ptr + RSV_SIZE > RXEND_INIT)
+ return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART + 1);
+ else
+ return ptr + RSV_SIZE;
+}
+
+/*
+ * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
+ */
+static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
+{
+ u16 erxrdpt;
+
+ if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
+ erxrdpt = end;
+ else
+ erxrdpt = next_packet_ptr - 1;
+
+ return erxrdpt;
+}
+
+static void nolock_rxfifo_init(struct enc424j600_net *priv, u16 start, u16 end)
+{
+ u16 erxrdpt;
+
+ if (start > 0x5FFF || end > 0x5FFF || start > end) {
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
+ "bad parameters!\n", __func__, start, end);
+ return;
+ }
+ /* set receive buffer start + end */
+ priv->next_pk_ptr = start;
+ enc424j600_write_16b_sfr(priv, ERXSTL, start);
+ erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
+ enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
+ enc424j600_write_16b_sfr(priv, ERXTAILL, end);
+}
+
+/*
+ * Hardware receive function.
+ * Read the buffer memory, update the FIFO pointer to free the buffer,
+ * check the status vector and decrement the packet counter.
+ */
+static void enc424j600_hw_rx(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ struct sk_buff *skb = NULL;
+ u16 erxrdpt, next_packet, rxstat;
+ u8 pkcnt;
+ u16 head, tail;
+ u8 rsv[RSV_SIZE];
+ u16 newrxtail;
+ int len;
+
+ if (netif_msg_rx_status(priv))
+ printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
+ priv->next_pk_ptr);
+ if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev,
+ "%s() Invalid packet address!! 0x%04x\n",
+ __func__, priv->next_pk_ptr);
+ mutex_lock(&priv->lock);
+ enc424j600_write_bits(priv, ECON1L, BFC(ECON1L), RXEN);
+ enc424j600_write_bits(priv, ECON2L, BFS(ECON2L), RXRST);
+ enc424j600_write_bits(priv, ECON2L, BFC(ECON2L), RXRST);
+ nolock_rxfifo_init(priv, RXSTART, RXEND_INIT);
+ enc424j600_write_bits(priv, EIRL, BFC(EIRL), RXABTIF);
+ enc424j600_write_bits(priv, ECON1L, BFS(ECON1L), RXEN);
+ mutex_unlock(&priv->lock);
+ ndev->stats.rx_errors++;
+ return;
+ }
+
+ /* Read next packet pointer and rx status vector */
+ enc424j600_read_sram(priv, rsv, sizeof(rsv), priv->next_pk_ptr,
+ RXWINDOW);
+
+ next_packet = rsv[1];
+ next_packet <<= 8;
+ next_packet |= rsv[0];
+
+ len = rsv[3];
+ len <<= 8;
+ len |= rsv[2];
+
+ rxstat = rsv[5];
+ rxstat <<= 8;
+ rxstat |= rsv[4];
+
+ if (netif_msg_rx_status(priv))
+ enc424j600_dump_rsv(priv, __func__, next_packet, len, rxstat);
+
+ if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
+ ndev->stats.rx_errors++;
+ if (RSV_GETBIT(rxstat, RSV_CRCERROR))
+ ndev->stats.rx_crc_errors++;
+ if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
+ ndev->stats.rx_frame_errors++;
+ if (len > MAX_FRAMELEN)
+ ndev->stats.rx_over_errors++;
+ } else {
+ skb = dev_alloc_skb(len + NET_IP_ALIGN);
+ if (!skb) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev,
+ "out of memory for Rx'd frame\n");
+ ndev->stats.rx_dropped++;
+ } else {
+ skb->dev = ndev;
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ /* copy the packet from the receive buffer */
+ enc424j600_read_sram(priv, skb_put(skb, len), len,
+ rx_packet_start(priv->next_pk_ptr),
+ RXWINDOW);
+
+ if (netif_msg_pktdata(priv))
+ dump_packet(__func__, skb->len, skb->data);
+ skb->protocol = eth_type_trans(skb, ndev);
+ /* update statistics */
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += len;
+ netif_rx_ni(skb);
+ }
+ }
+ newrxtail = next_packet - 2;
+ if (next_packet == RXSTART)
+ newrxtail = SRAMSIZE - 2;
+
+ enc424j600_write_16b_sfr(priv, ERXTAILL, newrxtail);
+ /*
+ * Move the RX read pointer to the start of the next
+ * received packet.
+ * This frees the memory we just read out
+ */
+ erxrdpt = erxrdpt_workaround(next_packet, RXSTART, RXEND_INIT);
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n", __func__,
+ erxrdpt);
+
+ /*TODO: remove mutex_lock wherever not required */
+ mutex_lock(&priv->lock);
+ enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
+
+ priv->next_pk_ptr = next_packet;
+ enc424j600_read_8b_sfr(priv, ESTATL, &pkcnt);
+ enc424j600_read_16b_sfr(priv, ERXHEADL, &head);
+ enc424j600_read_16b_sfr(priv, ERXTAILL, &tail);
+ /* we are done with this packet, decrement the packet counter */
+ enc424j600_write_bits(priv, ECON1H, BFS(ECON1H), PKTDEC);
+
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * Access the PHY to determine link status
+ */
+static void enc424j600_check_link_status(struct enc424j600_net *priv)
+{
+ u8 estath;
+ u16 macon2;
+
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ if (estath & PHYLNK) {
+ if (priv->autoneg) {
+ if (!enc424j600_wait_for_autoneg(priv)) {
+ if (estath & PHYDPX) {
+ printk(KERN_ALERT "Full Duplex");
+ enc424j600_read_16b_sfr(priv, MACON2L,
+ &macon2);
+ macon2 |= FULDPX;
+ enc424j600_write_16b_sfr(priv, MACON2L,
+ macon2);
+ }
+ } else /*if timed out, disable autoneg and continue */
+ priv->autoneg = AUTONEG_DISABLE;
+ }
+ netif_carrier_on(priv->netdev);
+ if (netif_msg_ifup(priv))
+ dev_info(&(priv->netdev->dev), "link up\n");
+ } else {
+ if (netif_msg_ifdown(priv))
+ dev_info(&(priv->netdev->dev), "link down\n");
+ netif_carrier_off(priv->netdev);
+ }
+}
+
+static void enc424j600_tx_clear(struct enc424j600_net *priv, bool err)
+{
+ struct net_device *ndev = priv->netdev;
+
+ if (err)
+ ndev->stats.tx_errors++;
+ else
+ ndev->stats.tx_packets++;
+
+ if (priv->tx_skb) {
+ if (!err)
+ ndev->stats.tx_bytes += priv->tx_skb->len;
+ dev_kfree_skb(priv->tx_skb);
+ priv->tx_skb = NULL;
+ }
+
+ netif_wake_queue(ndev);
+}
+
+static int enc424j600_int_rx_abbort_handler(struct enc424j600_net *priv,
+ int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intRXAbt(%d)\n", loop);
+ mutex_lock(&priv->lock);
+ priv->netdev->stats.rx_dropped++;
+ enc424j600_write_bits(priv, EIRL, BFC(EIRL), RXABTIF);
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_link_handler(struct enc424j600_net *priv, int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intLINK(%d)\n", loop);
+
+ /* we check more than is necessary here --
+ * only PHYLNK would be needed. */
+ enc424j600_check_link_status(priv);
+
+ return loop;
+}
+
+static int enc424j600_int_tx_handler(struct enc424j600_net *priv, int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intTX(%d)\n", loop);
+
+ mutex_lock(&priv->lock);
+ enc424j600_tx_clear(priv, false);
+ enc424j600_write_bits(priv, EIRL, BFC(EIRL), TXIF);
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_tx_err_handler(struct enc424j600_net *priv, int loop)
+{
+ u8 etxstat;
+
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intTXErr(%d)\n", loop);
+
+ mutex_lock(&priv->lock);
+
+ enc424j600_read_8b_sfr(priv, ETXSTATH, &etxstat);
+
+ if (etxstat & LATECOL) {
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": Late collision TXErr (%d)\n",
+ priv->tx_retry_count);
+ if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
+ enc424j600_write_bits(priv, ECON1L, BFS(ECON1L), TXRTS);
+ else
+ enc424j600_tx_clear(priv, true);
+ } else if (etxstat & MAXCOL) {
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG DRV_NAME ": Max collisions TXErr\n");
+ enc424j600_tx_clear(priv, true);
+ } else {
+ enc424j600_tx_clear(priv, true);
+ }
+
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_received_packet_handler(struct enc424j600_net *priv)
+{
+ uint8_t pk_counter;
+ int ret;
+
+ enc424j600_read_8b_sfr(priv, ESTATL, &pk_counter);
+ if (pk_counter && netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
+ if (pk_counter > priv->max_pk_counter) {
+ /* update statistics */
+ priv->max_pk_counter = pk_counter;
+ if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
+ printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
+ priv->max_pk_counter);
+ }
+ ret = pk_counter;
+ while (pk_counter-- > 0)
+ enc424j600_hw_rx(priv->netdev);
+ return ret;
+}
+
+static void enc424j600_irq_work_handler(struct work_struct *work)
+{
+
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, irq_work);
+ int loop;
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ /* disable further interrupts */
+ enc424j600_write_bits(priv, EIEH, BFC(EIEH), INTIE);
+
+ do {
+ u16 intflags;
+ enc424j600_read_16b_sfr(priv, EIRL, &intflags);
+ loop = 0;
+
+ /* LINK changed handler */
+ if ((intflags & LINKIF) != 0)
+ loop = enc424j600_int_link_handler(priv, loop);
+
+ /* TX complete handler */
+ if ((intflags & TXIF) != 0)
+ loop = enc424j600_int_tx_handler(priv, loop);
+
+ /* TX Error handler */
+ if ((intflags & TXABTIF) != 0) {
+ printk(KERN_ALERT "ABORTING TRANSMITTING PACKET");
+ loop = enc424j600_int_tx_err_handler(priv, loop);
+ }
+ /* RX Error handler */
+ if ((intflags & RXABTIF) != 0) {
+ printk(KERN_ALERT "ABORTING RECEIVED PACKET");
+ loop = enc424j600_int_rx_abbort_handler(priv, loop);
+ }
+ /* RX handler */
+ if ((intflags & PKTIF) != 0)
+ loop = enc424j600_int_received_packet_handler(priv);
+ enc424j600_write_bits(priv, EIRL, BFC(EIRL), intflags && 0xff);
+ enc424j600_write_bits(priv, EIRH, BFC(EIRH), intflags >> 8);
+ } while (loop);
+ /* re-enable interrupts */
+ enc424j600_write_bits(priv, EIEH, BFS(EIEH), INTIE);
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
+}
+
+void locked_reg_bfset(struct enc424j600_net *priv, u8 addr, u8 mask)
+{
+ mutex_lock(&priv->lock);
+ enc424j600_write_bits(priv, addr, BFS(addr), mask);
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * Hardware transmit function.
+ * Fill the buffer memory and send the contents of the transmit buffer
+ * onto the network
+ */
+static void enc424j600_hw_tx(struct enc424j600_net *priv)
+{
+ if (!priv->tx_skb) {
+ enc424j600_tx_clear(priv, false);
+ return;
+ }
+
+ if (netif_msg_tx_queued(priv))
+ printk(KERN_DEBUG DRV_NAME ": Tx Packet Len:%d\n",
+ priv->tx_skb->len);
+
+ if (netif_msg_pktdata(priv))
+ dump_packet(__func__, priv->tx_skb->len, priv->tx_skb->data);
+
+ enc424j600_write_sram(priv, priv->tx_skb->data, priv->tx_skb->len,
+ TXSTART, GPWINDOW);
+
+ /* Set the tx pointer to start of general purpose SRAM area */
+ enc424j600_write_16b_sfr(priv, ETXSTL, TXSTART);
+
+ /* Write the transfer length */
+ enc424j600_write_16b_sfr(priv, ETXLENL, priv->tx_skb->len);
+
+ /* set TX request flag */
+ locked_reg_bfset(priv, ECON1L, TXRTS);
+}
+
+static int enc424j600_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_tx_queued(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ /* If some error occurs while trying to transmit this
+ * packet, you should return '1' from this function.
+ * In such a case you _may not_ do anything to the
+ * SKB, it is still owned by the network queueing
+ * layer when an error is returned. This means you
+ * may not modify any SKB fields, you may not free
+ * the SKB, etc.
+ */
+ netif_stop_queue(dev);
+
+ /* save the timestamp */
+ priv->netdev->trans_start = jiffies;
+ /* Remember the skb for deferred processing */
+ priv->tx_skb = skb;
+ schedule_work(&priv->tx_work);
+
+ return NETDEV_TX_OK;
+}
+
+static void enc424j600_tx_work_handler(struct work_struct *work)
+{
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, tx_work);
+
+ /* actual delivery of data */
+ enc424j600_hw_tx(priv);
+}
+
+static irqreturn_t enc424j600_irq(int irq, void *dev_id)
+{
+ struct enc424j600_net *priv = dev_id;
+
+ /*
+ * Can't do anything in interrupt context because we need to
+ * block (spi_sync() is blocking) so fire of the interrupt
+ * handling workqueue.
+ * Remember that we access enc424j600 registers through SPI bus
+ * via spi_sync() call.
+ */
+ schedule_work(&priv->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void enc424j600_tx_timeout(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+
+ if (netif_msg_timer(priv))
+ dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
+
+ ndev->stats.tx_errors++;
+ /* can't restart safely under softirq */
+ schedule_work(&priv->restart_work);
+}
+
+/*
+ * Open/initialize the board. This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+static int enc424j600_net_open(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ if (netif_msg_ifup(priv))
+ dev_err(&dev->dev, "invalid MAC address %pM\n",
+ dev->dev_addr);
+ return -EADDRNOTAVAIL;
+ }
+ /* Reset the hardware here (and take it out of low power mode) */
+ enc424j600_lowpower(priv, false);
+ enc424j600_hw_disable(priv);
+ if (!enc424j600_hw_init(priv)) {
+ if (netif_msg_ifup(priv))
+ dev_err(&dev->dev, "hw_reset() failed\n");
+ return -EINVAL;
+ }
+ /* Update the MAC address (in case user has changed it) */
+ enc424j600_set_hw_macaddr(dev);
+ /* Enable interrupts */
+ enc424j600_hw_enable(priv);
+ /* check link status */
+ enc424j600_check_link_status(priv);
+ /* We are now ready to accept transmit requests from
+ * the queueing layer of the networking.
+ */
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/* The inverse routine to net_open(). */
+static int enc424j600_net_close(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ enc424j600_hw_disable(priv);
+ enc424j600_lowpower(priv, true);
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+/*
+ * Set or clear the multicast filter for this adapter
+ * num_addrs == -1 Promiscuous mode, receive all packets
+ * num_addrs == 0 Normal mode, filter out multicast packets
+ * num_addrs > 0 Multicast mode, receive normal and MC packets
+ */
+static void enc424j600_set_multicast_list(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+ int oldfilter = priv->rxfilter;
+
+ if (dev->flags & IFF_PROMISC) {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "promiscuous mode\n");
+ priv->rxfilter = RXFILTER_PROMISC;
+ } else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "%smulticast mode\n",
+ (dev->flags & IFF_ALLMULTI) ? "all-" : "");
+ priv->rxfilter = RXFILTER_MULTI;
+ } else {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "normal mode\n");
+ priv->rxfilter = RXFILTER_NORMAL;
+ }
+
+ if (oldfilter != priv->rxfilter)
+ schedule_work(&priv->setrx_work);
+}
+
+void locked_regb_write(struct enc424j600_net *priv, u8 address, u8 data)
+{
+ mutex_lock(&priv->lock);
+ enc424j600_write_8b_sfr(priv, address, data);
+ mutex_unlock(&priv->lock);
+}
+
+static void enc424j600_setrx_work_handler(struct work_struct *work)
+{
+ u16 macon1;
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, setrx_work);
+
+ if (priv->rxfilter == RXFILTER_PROMISC) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
+ enc424j600_read_16b_sfr(priv, MACON1L, &macon1);
+ macon1 = macon1 | PASSALL;
+ enc424j600_write_16b_sfr(priv, MACON1L, macon1);
+ locked_regb_write(priv, ERXFCONL, UCEN | MCEN | NOTMEEN);
+ } else if (priv->rxfilter == RXFILTER_MULTI) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
+ locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN | MCEN);
+ } else {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": normal mode\n");
+ locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN);
+ }
+}
+
+static void enc424j600_restart_work_handler(struct work_struct *work)
+{
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, restart_work);
+ struct net_device *ndev = priv->netdev;
+ int ret;
+
+ rtnl_lock();
+ if (netif_running(ndev)) {
+ enc424j600_net_close(ndev);
+ ret = enc424j600_net_open(ndev);
+ if (unlikely(ret)) {
+ dev_info(&ndev->dev, " could not restart %d\n", ret);
+ dev_close(ndev);
+ }
+ }
+ rtnl_unlock();
+}
+
+/* ......................... ETHTOOL SUPPORT ........................... */
+static int enc424j600_get_regs_len(struct net_device *dev)
+{
+ return SFR_REG_COUNT;
+}
+
+static void
+enc424j600_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+ strlcpy(info->bus_info,
+ dev_name(dev->dev.parent), sizeof(info->bus_info));
+}
+
+static int
+enc424j600_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->supported = SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_TP;
+
+ cmd->speed = priv->speed100 ? SPEED_100 : SPEED_10;
+ cmd->duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
+ cmd->port = PORT_TP;
+ cmd->autoneg = priv->autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+ return 0;
+}
+
+static int
+enc424j600_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ return enc424j600_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
+}
+
+static u32 enc424j600_get_msglevel(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ return priv->msg_enable;
+}
+
+static void enc424j600_set_msglevel(struct net_device *dev, u32 val)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ priv->msg_enable = val;
+}
+
+static void enc424j600_get_regs(struct net_device *dev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+ u8 *buff = p;
+ u8 addroffset;
+
+ regs->version = 1;
+ mutex_lock(&priv->lock);
+ for (addroffset = 0; addroffset < SFR_REG_COUNT; addroffset++) {
+ switch (addroffset) {
+ /*skip reading reserved regs */
+ case 0x4C:
+ case 0x4D:
+ case 0x4E:
+ case 0x4F:
+ case 0x50:
+ case 0x51:
+ case 0x81:
+ case 0x83:
+ case 0x85:
+ case 0x92:
+ case 0x93:
+ case 0x94:
+ case 0x95:
+ case 0x96:
+ case 0x97:
+ case 0x98:
+ case 0x99:
+ case 0x9A:
+ case 0x9B:
+ case 0x9C:
+ case 0x9D:
+ case 0x9E:
+ case 0x9F:
+ buff[addroffset] = 0;
+ break;
+ default:
+ buff[addroffset] = nolock_regb_read(priv, addroffset);
+ break;
+ }
+ }
+ mutex_unlock(&priv->lock);
+}
+
+static const struct ethtool_ops enc424j600_ethtool_ops = {
+ .get_settings = enc424j600_get_settings,
+ .set_settings = enc424j600_set_settings,
+ .get_drvinfo = enc424j600_get_drvinfo,
+ .get_msglevel = enc424j600_get_msglevel,
+ .set_msglevel = enc424j600_set_msglevel,
+ .get_regs_len = enc424j600_get_regs_len,
+ .get_regs = enc424j600_get_regs,
+};
+
+static int enc424j600_chipset_init(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ enc424j600_get_hw_macaddr(dev);
+ return enc424j600_hw_init(priv);
+}
+
+static const struct net_device_ops enc424j600_netdev_ops = {
+ .ndo_open = enc424j600_net_open,
+ .ndo_stop = enc424j600_net_close,
+ .ndo_start_xmit = enc424j600_send_packet,
+ .ndo_set_multicast_list = enc424j600_set_multicast_list,
+ .ndo_set_mac_address = enc424j600_set_mac_address,
+ .ndo_tx_timeout = enc424j600_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int __devinit enc424j600_probe(struct spi_device *spi)
+{
+ struct net_device *dev;
+ struct enc424j600_net *priv;
+ int ret = 0;
+
+ if (netif_msg_drv(&debug))
+ dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
+ DRV_VERSION);
+
+ dev = alloc_etherdev(sizeof(struct enc424j600_net));
+ if (!dev) {
+ if (netif_msg_drv(&debug))
+ dev_err(&spi->dev, DRV_NAME
+ ": unable to alloc new ethernet\n");
+ ret = -ENOMEM;
+ goto error_alloc;
+ }
+ priv = netdev_priv(dev);
+
+ priv->netdev = dev;
+
+ priv->spi = spi;
+ priv->msg_enable = netif_msg_init(debug.msg_enable,
+ ENC424J600_MSG_DEFAULT);
+ mutex_init(&priv->lock);
+ INIT_WORK(&priv->tx_work, enc424j600_tx_work_handler);
+ INIT_WORK(&priv->setrx_work, enc424j600_setrx_work_handler);
+ INIT_WORK(&priv->irq_work, enc424j600_irq_work_handler);
+ INIT_WORK(&priv->restart_work, enc424j600_restart_work_handler);
+ dev_set_drvdata(&spi->dev, priv);
+ SET_NETDEV_DEV(dev, &spi->dev);
+ /*TODO: chip DMA features to be utilized */
+ /* If requested, allocate DMA buffers */
+ if (enc424j600_enable_dma) {
+ spi->dev.coherent_dma_mask = ~0;
+
+ /*
+ * Minimum coherent DMA allocation is PAGE_SIZE, so allocate
+ * that much and share it between Tx and Rx DMA buffers.
+ */
+#if SPI_TRANSFER_BUF_LEN > PAGE_SIZE / 2
+#error "A problem in DMA buffer allocation"
+#endif
+ priv->spi_tx_buf = dma_alloc_coherent(&spi->dev,
+ PAGE_SIZE,
+ &priv->spi_tx_dma,
+ GFP_DMA);
+
+ if (priv->spi_tx_buf) {
+ priv->spi_rx_buf = (u8 *) (priv->spi_tx_buf +
+ (PAGE_SIZE / 2));
+ priv->spi_rx_dma = (dma_addr_t) (priv->spi_tx_dma +
+ (PAGE_SIZE / 2));
+ } else {
+ /* Fall back to non-DMA */
+ enc424j600_enable_dma = 0;
+ }
+ }
+
+ /* Allocate non-DMA buffers */
+ if (!enc424j600_enable_dma) {
+ priv->spi_tx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_tx_buf) {
+ ret = -ENOMEM;
+ goto error_tx_buf;
+ }
+ priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_rx_buf) {
+ ret = -ENOMEM;
+ goto error_rx_buf;
+ }
+ }
+
+ if (!enc424j600_chipset_init(dev)) {
+ if (netif_msg_probe(priv))
+ dev_info(&spi->dev, DRV_NAME " chip not found\n");
+ ret = -EIO;
+ goto error_irq;
+ }
+
+ /* Board setup must set the relevant edge trigger type;
+ * level triggers won't currently work.
+ */
+ ret = request_irq(spi->irq, enc424j600_irq, 0, DRV_NAME, priv);
+ if (ret < 0) {
+ if (netif_msg_probe(priv))
+ dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
+ "(ret = %d)\n", spi->irq, ret);
+ goto error_irq;
+ }
+
+ dev->if_port = IF_PORT_10BASET;
+ dev->irq = spi->irq;
+ dev->netdev_ops = &enc424j600_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ SET_ETHTOOL_OPS(dev, &enc424j600_ethtool_ops);
+
+ enc424j600_lowpower(priv, true);
+
+ ret = register_netdev(dev);
+ if (ret) {
+ if (netif_msg_probe(priv))
+ dev_err(&spi->dev, "register netdev " DRV_NAME
+ " failed (ret = %d)\n", ret);
+ goto error_register;
+ }
+ dev_info(&dev->dev, DRV_NAME " driver registered\n");
+
+ return ret;
+
+error_register:
+ free_irq(spi->irq, priv);
+error_irq:
+ free_netdev(dev);
+ if (!enc424j600_enable_dma)
+ kfree(priv->spi_rx_buf);
+error_rx_buf:
+ if (!enc424j600_enable_dma)
+ kfree(priv->spi_tx_buf);
+error_tx_buf:
+ if (enc424j600_enable_dma) {
+ dma_free_coherent(&spi->dev, PAGE_SIZE,
+ priv->spi_tx_buf, priv->spi_tx_dma);
+ }
+error_alloc:
+ return ret;
+}
+
+static int __devexit enc424j600_remove(struct spi_device *spi)
+{
+ struct enc424j600_net *priv = dev_get_drvdata(&spi->dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": remove\n");
+
+ unregister_netdev(priv->netdev);
+ free_irq(spi->irq, priv);
+ free_netdev(priv->netdev);
+
+ return 0;
+}
+
+static struct spi_driver enc424j600_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = enc424j600_probe,
+ .remove = __devexit_p(enc424j600_remove),
+};
+
+static int __init enc424j600_init(void)
+{
+ msec20_to_jiffies = msecs_to_jiffies(20);
+ /*autoneg works from 1600ms */
+ msec2000_to_jiffies = msecs_to_jiffies(2000);
+
+ return spi_register_driver(&enc424j600_driver);
+}
+
+module_init(enc424j600_init);
+
+static void __exit enc424j600_exit(void)
+{
+ spi_unregister_driver(&enc424j600_driver);
+}
+
+module_exit(enc424j600_exit);
+
+MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
+MODULE_AUTHOR("Balaji Venkatachalam <balaji.v@thotakaa.com>");
+MODULE_LICENSE("GPL");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");
+module_param(enc424j600_enable_dma, int, S_IRUGO);
+MODULE_PARM_DESC(enc424j600_enable_dma, "Enable SPI DMA. Default: 0 (Off)");
+MODULE_ALIAS("spi:" DRV_NAME);
+
diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600_hw.h
b/drivers/net/enc424j600_hw.h
--- a/drivers/net/enc424j600_hw.h 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/enc424j600_hw.h 2011-02-08 18:55:19.000000000 +0530
@@ -0,0 +1,460 @@
+/*
+* enc424j600_hw.h: Register definitions
+*
+*/
+
+#ifndef _ENC424J600_HW_H
+#define _ENC424J600_HW_H
+#define SFR_REG_COUNT 0xA0
+/*
+* ENC424J600 Control Registers
+* Control register definitions are a combination of address
+* and bank number
+* - Register address (bits 0-4)
+* - Bank number (bits 5-6)
+*/
+#define ADDR_MASK 0x1F
+#define BANK_MASK 0x60
+#define BANK_SHIFT 5
+
+/* All-bank registers */
+#define EUDASTL 0x16
+#define EUDASTH 0x17
+#define EUDANDL 0x18
+#define EUDANDH 0x19
+#define ESTATL 0x1A
+#define ESTATH 0x1B
+#define EIRL 0x1C
+#define EIRH 0x1D
+#define ECON1L 0x1E
+#define ECON1H 0x1F
+
+/* Bank 0 registers */
+#define ETXSTL (0x00 | 0x00)
+#define ETXSTH (0x01 | 0x00)
+#define ETXLENL (0x02 | 0x00)
+#define ETXLENH (0x03 | 0x00)
+#define ERXSTL (0x04 | 0x00)
+#define ERXSTH (0x05 | 0x00)
+#define ERXTAILL (0x06 | 0x00)
+#define ERXTAILH (0x07 | 0x00)
+#define ERXHEADL (0x08 | 0x00)
+#define ERXHEADH (0x09 | 0x00)
+#define EDMASTL (0x0A | 0x00)
+#define EDMASTH (0x0B | 0x00)
+#define EDMALENL (0x0C | 0x00)
+#define EDMALENH (0x0D | 0x00)
+#define EDMADSTL (0x0E | 0x00)
+#define EDMADSTH (0x0F | 0x00)
+#define EDMACSL (0x10 | 0x00)
+#define EDMACSH (0x11 | 0x00)
+#define ETXSTATL (0x12 | 0x00)
+#define ETXSTATH (0x13 | 0x00)
+#define ETXWIREL (0x14 | 0x00)
+#define ETXWIREH (0x15 | 0x00)
+
+/* Bank 1 registers */
+#define EHT1L (0x00 | 0x20)
+#define EHT1H (0x01 | 0x20)
+#define EHT2L (0x02 | 0x20)
+#define EHT2H (0x03 | 0x20)
+#define EHT3L (0x04 | 0x20)
+#define EHT3H (0x05 | 0x20)
+#define EHT4L (0x06 | 0x20)
+#define EHT4H (0x07 | 0x20)
+#define EPMM1L (0x08 | 0x20)
+#define EPMM1H (0x09 | 0x20)
+#define EPMM2L (0x0A | 0x20)
+#define EPMM2H (0x0B | 0x20)
+#define EPMM3L (0x0C | 0x20)
+#define EPMM3H (0x0D | 0x20)
+#define EPMM4L (0x0E | 0x20)
+#define EPMM4H (0x0F | 0x20)
+#define EPMCSL (0x10 | 0x20)
+#define EPMCSH (0x11 | 0x20)
+#define EPMOL (0x12 | 0x20)
+#define EPMOH (0x13 | 0x20)
+#define ERXFCONL (0x14 | 0x20)
+#define ERXFCONH (0x15 | 0x20)
+
+/* Bank 2 registers */
+#define MACON1L (0x00 | 0x40)
+#define MACON1H (0x01 | 0x40)
+#define MACON2L (0x02 | 0x40)
+#define MACON2H (0x03 | 0x40)
+#define MABBIPGL (0x04 | 0x40)
+#define MABBIPGH (0x05 | 0x40)
+#define MAIPGL (0x06 | 0x40)
+#define MAIPGH (0x07 | 0x40)
+#define MACLCONL (0x08 | 0x40)
+#define MACLCONH (0x09 | 0x40)
+#define MAMXFLL (0x0A | 0x40)
+#define MAMXFLH (0x0B | 0x40)
+#define MICMDL (0x12 | 0x40)
+#define MICMDH (0x13 | 0x40)
+#define MIREGADRL (0x14 | 0x40)
+#define MIREGADRH (0x15 | 0x40)
+
+/* Bank 3 registers */
+#define MAADR3L (0x00 | 0x60)
+#define MAADR3H (0x01 | 0x60)
+#define MAADR2L (0x02 | 0x60)
+#define MAADR2H (0x03 | 0x60)
+#define MAADR1L (0x04 | 0x60)
+#define MAADR1H (0x05 | 0x60)
+#define MIWRL (0x06 | 0x60)
+#define MIWRH (0x07 | 0x60)
+#define MIRDL (0x08 | 0x60)
+#define MIRDH (0x09 | 0x60)
+#define MISTATL (0x0A | 0x60)
+#define MISTATH (0x0B | 0x60)
+#define EPAUSL (0x0C | 0x60)
+#define EPAUSH (0x0D | 0x60)
+#define ECON2L (0x0E | 0x60)
+#define ECON2H (0x0F | 0x60)
+#define ERXWML (0x10 | 0x60)
+#define ERXWMH (0x11 | 0x60)
+#define EIEL (0x12 | 0x60)
+#define EIEH (0x13 | 0x60)
+#define EIDLEDL (0x14 | 0x60)
+#define EIDLEDH (0x15 | 0x60)
+
+/* Unbanked registers */
+#define EGPDATA (0x00 | 0x80)
+#define ERXDATA (0x02 | 0x80)
+#define EUDADATA (0x04 | 0x80)
+#define EGPRDPTL (0x06 | 0x80)
+#define EGPRDPTH (0x07 | 0x80)
+#define EGPWRPTL (0x08 | 0x80)
+#define EGPWRPTH (0x09 | 0x80)
+#define ERXRDPTL (0x0A | 0x80)
+#define ERXRDPTH (0x0B | 0x80)
+#define ERXWRPTL (0x0C | 0x80)
+#define ERXWRPTH (0x0D | 0x80)
+#define EUDARDPTL (0x0E | 0x80)
+#define EUDARDPTH (0x0F | 0x80)
+#define EUDAWRPTL (0x10 | 0x80)
+#define EUDAWRPTH (0x11 | 0x80)
+
+/* PHY registers */
+#define PHCON1 0x00
+#define PHSTAT1 0x01
+#define PHANA 0x04
+#define PHANLPA 0x05
+#define PHANE 0x06
+#define PHCON2 0x11
+#define PHSTAT2 0x1B
+#define PHSTAT3 0x1F
+
+/* Single-byte instructions */
+#define BXSEL(bank) (0xC0 + (bank & (BANK_MASK >> BANK_SHIFT)) * 2)
+/* Bank X Select */
+#define B0SEL 0xC0 /* Bank 0 Select */
+#define B1SEL 0xC2 /* Bank 1 Select */
+#define B2SEL 0xC4 /* Bank 2 Select */
+#define B3SEL 0xC6 /* Bank 3 Select */
+#define SETETHRST 0xCA /* System Reset */
+#define FCDISABLE 0xE0 /* Flow Control Disable */
+#define FCSINGLE 0xE2 /* Flow Control Single */
+#define FCMULTIPLE 0xE4 /* Flow Control Multiple */
+#define FCCLEAR 0xE6 /* Flow Control Clear */
+#define SETPKTDEC 0xCC /* Decrement Packet Counter */
+#define DMASTOP 0xD2 /* DMA Stop */
+#define DMACKSUM 0xD8 /* DMA Start Checksum */
+#define DMACKSUMS 0xDA /* DMA Start Checksum with Seed */
+#define DMACOPY 0xDC /* DMA Start Copy */
+#define DMACOPYS 0xDE /* DMA Start Copy and Checksum with Seed */
+#define SETTXRTS 0xD4 /* Request Packet Transmission */
+#define ENABLERX 0xE8 /* Enable RX */
+#define DISABLERX 0xEA /* Disable RX */
+#define SETEIE 0xEC /* Enable Interrupts */
+#define CLREIE 0xEE /* Disable Interrupts */
+
+/* Two byte instructions */
+#define RBSEL 0xC8 /* Read Bank Select */
+
+/* Three byte instructions */
+#define WGPRDPT 0x60 /* Write EGPRDPT */
+#define RGPRDPT 0x62 /* Read EGPRDPT */
+#define WRXRDPT 0x64 /* Write ERXRDPT */
+#define RRXRDPT 0x66 /* Read ERXRDPT */
+#define WUDARDPT 0x68 /* Write EUDARDPT */
+#define RUDARDPT 0x6A /* Read EUDARDPT */
+#define WGPWRPT 0x6C /* Write EGPWRPT */
+#define RGPWRPT 0x6E /* Read EGPWRPT */
+#define WRXWRPT 0x70 /* Write ERXWRPT */
+#define RRXWRPT 0x72 /* Read ERXWRPT */
+#define WUDAWRPT 0x74 /* Write EUDAWRPT */
+#define RUDAWRPT 0x76 /* Read EUDAWRPT */
+
+/* n byte instructions */
+#define RCR(addr) (0x00 | (addr & ADDR_MASK)) /* Read Control Register */
+#define WCR(addr) (0x40 | (addr & ADDR_MASK)) /* Write Control Register */
+#define RCRU 0x20 /* Read Control Register Unbanked */
+#define WCRU 0x22 /* Write Control Register Unbanked */
+#define BFS(addr) (0x80 | (addr & ADDR_MASK)) /* Bit Field Set */
+#define BFC(addr) (0xA0 | (addr & ADDR_MASK)) /* Bit Field Clear */
+#define BFSU 0x24 /* Bit Field Set Unbanked */
+#define BFCU 0x26 /* Bit Field Clear Unbanked */
+#define RGPDATA 0x28 /* Read EGPDATA */
+#define WGPDATA 0x2A /* Write EGPDATA */
+#define RRXDATA 0x2C /* Read ERXDATA */
+#define WRXDATA 0x2E /* Write ERXDATA */
+#define RUDADATA 0x30 /* Read EUDADATA */
+#define WUDADATA 0x32 /* Write EUDADATA */
+
+/* Register bit definitions */
+/* ESTATH */
+#define INT (1 << 7)
+#define FCIDLE (1 << 6)
+#define RXBUSY (1 << 5)
+#define CLKRDY (1 << 4)
+#define PHYDPX (1 << 2)
+#define PHYLNK (1 << 0)
+
+/* EIRH */
+/*for ease of use lets access it as a word*/
+#define CRYPTEN (1 << 15)
+#define MODEXIF (1 << 14)
+#define HASHIF (1 << 13)
+#define AESIF (1 << 12)
+#define LINKIF (1 << 11)
+
+/* EIRL */
+#define PKTIF (1 << 6)
+#define DMAIF (1 << 5)
+#define TXIF (1 << 3)
+#define TXABTIF (1 << 2)
+#define RXABTIF (1 << 1)
+#define PCFULIF (1 << 0)
+
+/* ECON1H */
+#define MODEXST (1 << 7)
+#define HASHEN (1 << 6)
+#define HASHOP (1 << 5)
+#define HASHLST (1 << 4)
+#define AESST (1 << 3)
+#define AESOP1 (1 << 2)
+#define AESOP0 (1 << 1)
+#define PKTDEC (1 << 0)
+
+/* ECON1L */
+#define FCOP1 (1 << 7)
+#define FCOP0 (1 << 6)
+#define DMAST (1 << 5)
+#define DMACPY (1 << 4)
+#define DMACSSD (1 << 3)
+#define DMANOCS (1 << 2)
+#define TXRTS (1 << 1)
+#define RXEN (1 << 0)
+
+/* ETXSTATH */
+#define LATECOL (1 << 2)
+#define MAXCOL (1 << 1)
+#define EXDEFER (1 << 0)
+
+/* ETXSTATL */
+#define ETXSTATL_DEFER (1 << 7)
+#define CRCBAD (1 << 4)
+#define COLCNT_MASK 0xF
+
+/* ERXFCONH */
+#define HTEN (1 << 7)
+#define MPEN (1 << 6)
+#define NOTPM (1 << 4)
+#define PMEN3 (1 << 3)
+#define PMEN2 (1 << 2)
+#define PMEN1 (1 << 1)
+#define PMEN0 (1 << 0)
+
+/* ERXFCONL */
+#define CRCEEN (1 << 7)
+#define CRCEN (1 << 6)
+#define RUNTEEN (1 << 5)
+#define RUNTEN (1 << 4)
+#define UCEN (1 << 3)
+#define NOTMEEN (1 << 2)
+#define MCEN (1 << 1)
+#define BCEN (1 << 0)
+/*no bytewise access*/
+/* MACON1L */
+#define LOOPBK (1 << 4)
+#define RXPAUS (1 << 2)
+#define PASSALL (1 << 1)
+
+/* MACON2 */
+#define MACON2_DEFER (1 << 14)
+#define BPEN (1 << 13)
+#define NOBKOFF (1 << 12)
+#define PADCFG2 (1 << 7)
+#define PADCFG1 (1 << 6)
+#define PADCFG0 (1 << 5)
+#define TXCRCEN (1 << 4)
+#define PHDREN (1 << 3)
+#define HFRMEN (1 << 2)
+#define FULDPX (1 << 0)
+
+/* MAIPG */
+/* value of the high byte is given by the reserved bits,
+* value of the low byte is recomended setting of the
+* IPG parameter.
+*/
+#define MAIPGH_VAL 0x0C
+#define MAIPGL_VAL 0x12
+
+/* MIREGADRH */
+#define MIREGADRH_VAL 0x01
+
+/* MIREGADRL */
+#define PHREG_MASK 0x1F
+
+/* MICMDL */
+#define MIISCAN (1 << 1)
+#define MIIRD (1 << 0)
+
+/* MISTATL */
+#define NVALID (1 << 2)
+#define SCAN (1 << 1)
+#define BUSY (1 << 0)
+
+/* ECON2H */
+#define ETHEN (1 << 7)
+#define STRCH (1 << 6)
+#define TXMAC (1 << 5)
+#define SHA1MD5 (1 << 4)
+#define COCON3 (1 << 3)
+#define COCON2 (1 << 2)
+#define COCON1 (1 << 1)
+#define COCON0 (1 << 0)
+
+/* ECON2L */
+#define AUTOFC (1 << 7)
+#define TXRST (1 << 6)
+#define RXRST (1 << 5)
+#define ETHRST (1 << 4)
+#define MODLEN1 (1 << 3)
+#define MODLEN0 (1 << 2)
+#define AESLEN1 (1 << 1)
+#define AESLEN0 (1 << 0)
+
+/* EIEH */
+#define INTIE (1 << 7)
+#define MODEXIE (1 << 6)
+#define HASHIE (1 << 5)
+#define AESIE (1 << 4)
+#define LINKIE (1 << 3)
+
+/* EIEL */
+#define PKTIE (1 << 6)
+#define DMAIE (1 << 5)
+#define TXIE (1 << 3)
+#define TXABTIE (1 << 2)
+#define RXABTIE (1 << 1)
+#define PCFULIE (1 << 0)
+
+/* EIDLEDH */
+#define LACFG3 (1 << 7)
+#define LACFG2 (1 << 6)
+#define LACFG1 (1 << 5)
+#define LACFG0 (1 << 4)
+#define LBCFG3 (1 << 3)
+#define LBCFG2 (1 << 2)
+#define LBCFG1 (1 << 1)
+#define LBCFG0 (1 << 0)
+
+/* EIDLEDL */
+#define DEVID_SHIFT 5
+#define DEVID_MASK (0x7 << DEVID_SHIFT)
+#define REVID_SHIFT 0
+#define REVID_MASK (0x1F << REVID_SHIFT)
+
+/* PHANA */
+/* Default value for PHY initialization*/
+#define PHANA_DEFAULT 0x05E1
+
+/* PHCON1 */
+#define PRST (1 << 15)
+#define PLOOPBK (1 << 14)
+#define SPD100 (1 << 13)
+#define ANEN (1 << 12)
+#define PSLEEP (1 << 11)
+#define RENEG (1 << 9)
+#define PFULDPX (1 << 8)
+
+/* PHSTAT */
+#define FULL100 (1 << 14)
+#define HALF100 (1 << 13)
+#define FULL10 (1 << 12)
+#define HALF10 (1 << 11)
+#define ANDONE (1 << 5)
+#define LRFAULT (1 << 4)
+#define ANABLE (1 << 3)
+#define LLSTAT (1 << 2)
+#define EXTREGS (1 << 0)
+
+#define EUDAST_TEST_VAL 0x1234
+
+#define TSV_SIZE 7
+
+#define ENC424J600_DEV_ID 0x1
+
+/* Configuration */
+
+/* Led is on when the link is present and driven low
+* temporarily when packet is TX'd or RX'd */
+#define LED_A_SETTINGS 0xC
+
+/* Led is on if the link is in 100 Mbps mode */
+#define LED_B_SETTINGS 0x8
+
+/* maximum ethernet frame length
+* Currently not used as a limit anywhere
+* (we're using the "huge frame enable" feature of
+* enc424j600). */
+#define MAX_FRAMELEN 1518
+
+/* Size in bytes of the receive buffer in enc424j600.
+* Must be word aligned (even).
+*/
+#define RX_BUFFER_SIZE (15 * MAX_FRAMELEN)
+
+/* Start of the general purpose area in sram */
+#define SRAM_GP_START 0x0
+
+/* SRAM size */
+#define SRAM_SIZE 0x6000
+
+/* Start of the receive buffer */
+#define ERXST_VAL (SRAM_SIZE - RX_BUFFER_SIZE)
+
+#define RSV_RXLONGEVDROPEV 16
+#define RSV_CARRIEREV 18
+#define RSV_CRCERROR 20
+#define RSV_LENCHECKERR 21
+#define RSV_LENOUTOFRANGE 22
+#define RSV_RXOK 23
+#define RSV_RXMULTICAST 24
+#define RSV_RXBROADCAST 25
+#define RSV_DRIBBLENIBBLE 26
+#define RSV_RXCONTROLFRAME 27
+#define RSV_RXPAUSEFRAME 28
+#define RSV_RXUNKNOWNOPCODE 29
+#define RSV_RXTYPEVLAN 30
+
+#define RSV_RUNTFILTERMATCH 31
+#define RSV_NOTMEFILTERMATCH 32
+#define RSV_HASHFILTERMATCH 33
+#define RSV_MAGICPKTFILTERMATCH 34
+#define RSV_PTRNMTCHFILTERMATCH 35
+#define RSV_UNICASTFILTERMATCH 36
+
+#define RSV_SIZE 8
+#define RSV_BITMASK(x) (1 << ((x) - 16))
+#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0)
+
+/* Put RX buffer at 0 as suggested by the Errata datasheet */
+
+#define RXSTART_INIT ERXST_VAL
+#define RXEND_INIT 0x5FFF
+
+#endif
diff -uprN -X a/Documentation/dontdiff a/drivers/net/Kconfig
b/drivers/net/Kconfig
--- a/drivers/net/Kconfig 2010-07-05 22:41:43.000000000 +0530
+++ b/drivers/net/Kconfig 2011-01-16 15:26:16.000000000 +0530
@@ -973,6 +973,16 @@ config ENC28J60_WRITEVERIFY
Enable the verify after the buffer write useful for debugging purpose.
If unsure, say N.
+config ENC424J600
+ tristate "ENC424J600 support"
+ depends on EXPERIMENTAL && SPI && NET_ETHERNET
+ select CRC32
+ ---help---
+ Support for the Microchip EN424J600 ethernet chip.
+
+ To compile this driver as a module, choose M here. The module will be
+ called enc424j600.
+
config ETHOC
tristate "OpenCores 10/100 Mbps Ethernet MAC support"
depends on NET_ETHERNET && HAS_IOMEM
diff -uprN -X a/Documentation/dontdiff a/drivers/net/Makefile
b/drivers/net/Makefile
--- a/drivers/net/Makefile 2010-07-05 22:41:43.000000000 +0530
+++ b/drivers/net/Makefile 2011-01-05 21:46:57.000000000 +0530
@@ -240,6 +240,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_d
pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
+obj-$(CONFIG_ENC424J600) += enc424j600.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
2011-02-08 14:48 ` Balaji Venkatachalam
@ 2011-02-23 6:00 ` Balaji Venkatachalam
0 siblings, 0 replies; 14+ messages in thread
From: Balaji Venkatachalam @ 2011-02-23 6:00 UTC (permalink / raw)
To: netdev; +Cc: Lakshmi Mohan, Sriram Subramanian
Kindly let me know your feedback.
Regards,
Balaji
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
2011-01-29 8:03 Balaji Venkatachalam
@ 2011-01-29 11:58 ` Francois Romieu
0 siblings, 0 replies; 14+ messages in thread
From: Francois Romieu @ 2011-01-29 11:58 UTC (permalink / raw)
To: Balaji Venkatachalam
Cc: netdev, mohan, blue.cube, lanconelli.claudio, Sriram Subramanian,
vbalaji.acs
Balaji Venkatachalam <balaji.v@thotakaa.com> :
[...]
> +static int enc424j600_spi_trans(struct enc424j600_net *priv, int len)
> +{
> + /*modified to suit half duplexed spi */
> + struct spi_transfer tt = {
> + .tx_buf = priv->spi_tx_buf,
> + .len = SPI_OPLEN,
> + };
> + struct spi_transfer tr = {
> + .rx_buf = priv->spi_rx_buf,
> + .len = len,
> + };
> + struct spi_message m;
> + int ret;
> +
> + spi_message_init(&m);
> +
> + spi_message_add_tail(&tt, &m);
> + spi_message_add_tail(&tr, &m);
> +
> + ret = spi_sync(priv->spi, &m);
> +
> + if (ret == 0)
> + memcpy(priv->spi_rx_buf, tr.rx_buf, len);
> +
> + if (ret)
> + dev_err(&priv->spi->dev,
> + "spi transfer failed: ret = %d\n", ret);
> + return ret;
if (ret) {
dev_err(&priv->spi->dev,
"spi transfer failed: ret = %d\n", ret);
goto out;
}
memcpy(priv->spi_rx_buf, tr.rx_buf, len);
out:
return ret;
> +}
> +
> +/*
> + * Read data from chip SRAM.
> + * window = 0 for Receive Buffer
> + * = 1 for User Defined area
> + * = 2 for General Purpose area
> + */
> +static int enc424j600_read_sram(struct enc424j600_net *priv,
> + u8 *dst, int len, u16 srcaddr, int window)
> +{
> + int ret;
> +
> + if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
> + return -EINVAL;
> +
> + /* First set the write pointer as per selected window */
> + if (window == RXWINDOW)
> + priv->spi_tx_buf[0] = WRXRDPT;
> + else if (window == USERWINDOW)
> + priv->spi_tx_buf[0] = WUDARDPT;
> + else if (window == GPWINDOW)
> + priv->spi_tx_buf[0] = WGPRDPT;
> +
> + priv->spi_tx_buf[1] = srcaddr & 0xFF;
> + priv->spi_tx_buf[2] = srcaddr >> 8;
> + ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
> +
> + /* Transfer the data */
> + if (window == RXWINDOW)
> + priv->spi_tx_buf[0] = RRXDATA;
> + else if (window == USERWINDOW)
> + priv->spi_tx_buf[0] = RUDADATA;
> + else if (window == GPWINDOW)
> + priv->spi_tx_buf[0] = RGPDATA;
May be a local :
u8 *tx_buf = priv->spi_tx_buf;
> +
> + ret = enc424j600_spi_trans(priv, len + 1);
> + /*READ*/
> + /* Copy the data from the rx buffer */
^^^^
> + memcpy(dst, &priv->spi_rx_buf[0], len);
^^^^
tab vs spaces
> +
> + return ret;
> +}
> +
> +/*
> + * Write data to chip SRAM.
> + * window = 1 for RX
> + * window = 2 for User Data
> + * window = 3 for GP
> + */
> +static int enc424j600_write_sram(struct enc424j600_net *priv,
> + const u8 *src, int len, u16 dstaddr,
> + int window)
> +{
> + int ret;
> +
> + if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
> + return -EINVAL;
> +
> + /* First set the general purpose write pointer */
> + if (window == RXWINDOW)
> + priv->spi_tx_buf[0] = WRXWRPT;
> + else if (window == USERWINDOW)
> + priv->spi_tx_buf[0] = WUDAWRPT;
> + else if (window == GPWINDOW)
> + priv->spi_tx_buf[0] = WGPWRPT;
> +
> + priv->spi_tx_buf[1] = dstaddr & 0xFF;
> + priv->spi_tx_buf[2] = dstaddr >> 8;
> + ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
> +
> + /* Copy the data to the tx buffer */
> + memcpy(&priv->spi_tx_buf[1], src, len);
> +
> + /* Transfer the data */
> + if (window == RXWINDOW)
> + priv->spi_tx_buf[0] = WRXDATA;
> + else if (window == USERWINDOW)
> + priv->spi_tx_buf[0] = WUDADATA;
> + else if (window == GPWINDOW)
> + priv->spi_tx_buf[0] = WGPDATA;
> +
> + ret = spi_write(priv->spi, priv->spi_tx_buf, len + 1);
> +
> + return ret;
> +}
> +
> +/*
> + * Select the current register bank if necessary to be able to read @addr.
> + */
> +static void enc424j600_set_bank(struct enc424j600_net *priv, u8 addr)
> +{
> + u8 b = (addr & BANK_MASK) >> BANK_SHIFT;
> +
> + /* These registers are present in all banks, no need to switch bank */
> + if (addr >= EUDASTL && addr <= ECON1H)
> + return;
> + if (priv->bank == b)
> + return;
> +
> + priv->spi_tx_buf[0] = BXSEL(b);
> +
> + enc424j600_spi_trans(priv, 1);
> + /*WRITE*/ priv->bank = b;
Please put this comment on a separate line (or remove it completely ?).
> +}
> +
> +/*
> + * Set bits in an 8bit SFR.
> + */
> +static void enc424j600_set_bits(struct enc424j600_net *priv, u8 addr, u8 mask)
> +{
> + enc424j600_set_bank(priv, addr);
> + priv->spi_tx_buf[0] = BFS(addr);
> + priv->spi_tx_buf[1] = mask;
> + spi_write(priv->spi, priv->spi_tx_buf, 2);
> +}
static void enc424j600_write_bits(struct enc424j600_net *priv, u8 addr,
u8 bits, u8 mask)
{
enc424j600_set_bank(priv, addr);
priv->spi_tx_buf[0] = bits;
priv->spi_tx_buf[1] = mask;
spi_write(priv->spi, priv->spi_tx_buf, 2);
}
enc424j600_write_bits(priv, addr, BFS(addr), mask); ?
> +
> +/*
> + * Clear bits in an 8bit SFR.
> + */
> +static void enc424j600_clear_bits(struct enc424j600_net *priv, u8
> addr, u8 mask)
> +{
> + enc424j600_set_bank(priv, addr);
> + priv->spi_tx_buf[0] = BFC(addr);
> + priv->spi_tx_buf[1] = mask;
> + spi_write(priv->spi, priv->spi_tx_buf, 2);
> +}
enc424j600_write_bits(priv, addr, BFC(addr), mask); ?
> +
> +/*
> + * Write a 8bit special function register.
> + * The @sfr parameters takes address of the register.
> + * Uses banked write instruction.
> + */
> +static int enc424j600_write_8b_sfr(struct enc424j600_net *priv, u8
> sfr, u8 data)
> +{
> + int ret;
> + enc424j600_set_bank(priv, sfr);
Please add an empty line after 'int ret'.
> +
> + priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
> + priv->spi_tx_buf[1] = data & 0xFF;
> + ret = spi_write(priv->spi, priv->spi_tx_buf, 2);
> +
> + return ret;
> +}
> +
> +/*
> + * Read a 8bit special function register.
> + * The @sfr parameters takes address of the register.
> + * Uses banked read instruction.
> + */
> +static int enc424j600_read_8b_sfr(struct enc424j600_net *priv,
> + u8 sfr, u8 *data)
> +{
> + int ret;
> +
> + enc424j600_set_bank(priv, sfr);
> + priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
> + ret = enc424j600_spi_trans(priv, 2);
> + /*READ*/ *data = priv->spi_rx_buf[0];
Please put this comment on a separate line (or remove it completely ?).
> +
> + return ret;
> +}
> +
> +/*
> + * Write a 16bit special function register.
> + * The @sfr parameters takes address of the low byte of the register.
> + * Takes care of the endiannes & buffers.
> + * Uses banked write instruction.
> + */
> +
> +static int enc424j600_write_16b_sfr(struct enc424j600_net *priv,
> + u8 sfr, u16 data)
> +{
> + int ret;
> + enc424j600_set_bank(priv, sfr);
Please add an empty line after 'int ret'.
> +
> + priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
> + priv->spi_tx_buf[1] = data & 0xFF;
> + priv->spi_tx_buf[2] = data >> 8;
> + ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
> + if (ret && netif_msg_drv(priv))
> + printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
> + __func__, ret);
Use netif_err ?
> +
> + return ret;
> +}
> +
> +/*
> + * Read a 16bit special function register.
> + * The @sfr parameters takes address of the low byte of the register.
> + * Takes care of the endiannes & buffers.
> + * Uses banked read instruction.
> + */
> +static int enc424j600_read_16b_sfr(struct enc424j600_net *priv,
> + u8 sfr, u16 *data)
> +{
> + int ret;
> + enc424j600_set_bank(priv, sfr);
Please add an empty line after 'int ret'.
> +
> + priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
> + priv->spi_tx_buf[1] = 0;
> + priv->spi_tx_buf[2] = 0;
> + priv->spi_tx_buf[3] = 0;
> + ret = enc424j600_spi_trans(priv, 3);
> + /*READ*/ *data = priv->spi_rx_buf[0] | priv->spi_rx_buf[1] << (u16) 8;
Please put this comment on a separate line (or remove it completely ?).
> +
> + return ret;
> +}
> +
> +static unsigned long msec20_to_jiffies;
> +
> +/*
> + * Wait for bits in register to become equal to @readyMask, but at most 20ms.
> + */
> +static int checktimeout_16bit(struct enc424j600_net *priv,
> + u8 reg, u16 mask, u16 readyMask)
> +{
> + unsigned long timeout = jiffies + msec20_to_jiffies;
> + u16 value;
Please add an empty line after 'u16 value'.
> + /* 20 msec timeout read */
> + enc424j600_read_16b_sfr(priv, reg, &value);
> + while ((value & mask) != readyMask) {
> + if (time_after(jiffies, timeout)) {
> + if (netif_msg_drv(priv))
> + dev_dbg(&priv->spi->dev,
> + "reg %02x ready timeout!\n", reg);
Use netif_err (or friend).
> + return -ETIMEDOUT;
> + }
> + cpu_relax();
> + enc424j600_read_16b_sfr(priv, reg, &value);
> + }
> +
> + return 0;
> +}
> +
> +static int checktimeout_8bit(struct enc424j600_net *priv,
> + u8 reg, u8 mask, u8 readyMask)
> +{
> + unsigned long timeout = jiffies + msec20_to_jiffies;
> + u8 value;
Please add an empty line after 'u8 value'.
> + /* 20 msec timeout read */
> + enc424j600_read_8b_sfr(priv, reg, &value);
> + while ((value & mask) != readyMask) {
> + if (time_after(jiffies, timeout)) {
> + if (netif_msg_drv(priv))
> + dev_dbg(&priv->spi->dev,
> + "reg %02x ready timeout!\n", reg);
> + return -ETIMEDOUT;
> + }
> + cpu_relax();
> + enc424j600_read_8b_sfr(priv, reg, &value);
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Reset the enc424j600.
> + */
> +static int enc424j600_soft_reset(struct enc424j600_net *priv)
> +{
> + int ret;
> + u16 eudast;
> + if (netif_msg_hw(priv))
> + printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
Please add an empty line after 'u16 eudast'.
[...]
> +/*Debug routine to dump useful register contents*/
> +static void enc424j600_dump_regs(struct enc424j600_net *priv, const char *msg)
> +{
[...]
Could the same goal be achieved with ethtool_ops.get_regs ?
Otherwise you can grep for debugfs.h below drivers/net.
[...]
> +static int enc424j600_net_open(struct net_device *dev)
> +{
> + struct enc424j600_net *priv = netdev_priv(dev);
> +
> + if (netif_msg_drv(priv))
> + printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
> +
> + if (!is_valid_ether_addr(dev->dev_addr)) {
> + if (netif_msg_ifup(priv))
> + dev_err(&dev->dev, "invalid MAC address %pM\n",
> + dev->dev_addr);
> + return -EADDRNOTAVAIL;
> + }
> + /* Reset the hardware here (and take it out of low power mode) */
> + enc424j600_lowpower(priv, false);
> + enc424j600_hw_disable(priv);
> + if (!enc424j600_hw_init(priv)) {
> + if (netif_msg_ifup(priv))
> + dev_err(&dev->dev, "hw_reset() failed\n");
> + return -EINVAL;
Propagate the return status code of enc424j600_hw_init ?
> + }
> + /* Update the MAC address (in case user has changed it) */
> + enc424j600_set_hw_macaddr(dev);
> + /* Enable interrupts */
> + enc424j600_hw_enable(priv);
> + /* check link status */
> + enc424j600_check_link_status(priv);
> + /* We are now ready to accept transmit requests from
> + * the queueing layer of the networking.
> + */
> + netif_start_queue(dev);
> +
> + return 0;
> +}
[...]
> +static const struct ethtool_ops enc424j600_ethtool_ops = {
> + .get_settings = enc424j600_get_settings,
> + .set_settings = enc424j600_set_settings,
> + .get_drvinfo = enc424j600_get_drvinfo,
> + .get_msglevel = enc424j600_get_msglevel,
> + .set_msglevel = enc424j600_set_msglevel,
Please <tab>=<space>
> +};
> +
> +static int enc424j600_chipset_init(struct net_device *dev)
> +{
> + struct enc424j600_net *priv = netdev_priv(dev);
> +
> + enc424j600_get_hw_macaddr(dev);
> + return enc424j600_hw_init(priv);
> +
> +}
Remove the empty line after the return statement.
> +
> +static const struct net_device_ops enc424j600_netdev_ops = {
> + .ndo_open = enc424j600_net_open,
> + .ndo_stop = enc424j600_net_close,
> + .ndo_start_xmit = enc424j600_send_packet,
> + .ndo_set_multicast_list = enc424j600_set_multicast_list,
> + .ndo_set_mac_address = enc424j600_set_mac_address,
> + .ndo_tx_timeout = enc424j600_tx_timeout,
> + .ndo_change_mtu = eth_change_mtu,
> + .ndo_validate_addr = eth_validate_addr,
> +};
> +
> +static int __devinit enc424j600_probe(struct spi_device *spi)
> +{
> + struct net_device *dev;
> + struct enc424j600_net *priv;
> + int ret = 0;
int ret = -ENOMEM;
Then simplify code below.
> +
> + if (netif_msg_drv(&debug))
> + dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
> + DRV_VERSION);
> +
> + dev = alloc_etherdev(sizeof(struct enc424j600_net));
> + if (!dev) {
> + if (netif_msg_drv(&debug))
> + dev_err(&spi->dev, DRV_NAME
> + ": unable to alloc new ethernet\n");
> + ret = -ENOMEM;
> + goto error_alloc;
> + }
> + priv = netdev_priv(dev);
> +
> + priv->netdev = dev; /* priv to netdev reference */
> + priv->spi = spi; /* priv to spi reference */
> + priv->msg_enable = netif_msg_init(debug.msg_enable,
> + ENC424J600_MSG_DEFAULT);
> + mutex_init(&priv->lock);
> + INIT_WORK(&priv->tx_work, enc424j600_tx_work_handler);
> + INIT_WORK(&priv->setrx_work, enc424j600_setrx_work_handler);
> + INIT_WORK(&priv->irq_work, enc424j600_irq_work_handler);
> + INIT_WORK(&priv->restart_work, enc424j600_restart_work_handler);
> + dev_set_drvdata(&spi->dev, priv); /* spi to priv reference */
The three comments above are useless.
> + SET_NETDEV_DEV(dev, &spi->dev);
> + /*TODO: chip DMA features to be utilized */
> + /* If requested, allocate DMA buffers */
> + if (enc424j600_enable_dma) {
> + spi->dev.coherent_dma_mask = ~0;
> +
> + /*
> + * Minimum coherent DMA allocation is PAGE_SIZE, so allocate
> + * that much and share it between Tx and Rx DMA buffers.
> + */
> +#if SPI_TRANSFER_BUF_LEN > PAGE_SIZE / 2
> +#error "A problem in DMA buffer allocation"
> +#endif
> + priv->spi_tx_buf = dma_alloc_coherent(&spi->dev,
> + PAGE_SIZE,
> + &priv->spi_tx_dma,
> + GFP_DMA);
> +
> + if (priv->spi_tx_buf) {
> + priv->spi_rx_buf = (u8 *) (priv->spi_tx_buf +
> + (PAGE_SIZE / 2));
priv->spi_rx_buf =
(u8 *) (priv->spi_tx_buf + (PAGE_SIZE / 2));
> + priv->spi_rx_dma = (dma_addr_t) (priv->spi_tx_dma +
> + (PAGE_SIZE / 2));
> + } else {
> + /* Fall back to non-DMA */
> + enc424j600_enable_dma = 0;
> + }
> + }
> +
> + /* Allocate non-DMA buffers */
> + if (!enc424j600_enable_dma) {
> + priv->spi_tx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
> + if (!priv->spi_tx_buf) {
> + ret = -ENOMEM;
> + goto error_tx_buf;
Please:
goto error_what_must_be_done;
instead of:
goto error_where_it_comes_from;
> + }
> + priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
> + if (!priv->spi_rx_buf) {
> + ret = -ENOMEM;
> + goto error_rx_buf;
> + }
> + }
> +
> + if (!enc424j600_chipset_init(dev)) {
> + if (netif_msg_probe(priv))
> + dev_info(&spi->dev, DRV_NAME " chip not found\n");
> + ret = -EIO;
> + goto error_irq;
> + }
> +
> + /* Board setup must set the relevant edge trigger type;
> + * level triggers won't currently work.
> + */
> + ret = request_irq(spi->irq, enc424j600_irq, 0, DRV_NAME, priv);
> + if (ret < 0) {
> + if (netif_msg_probe(priv))
> + dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
> + "(ret = %d)\n", spi->irq, ret);
> + goto error_irq;
> + }
> +
> + dev->if_port = IF_PORT_10BASET;
> + dev->irq = spi->irq;
> + dev->netdev_ops = &enc424j600_netdev_ops;
> + dev->watchdog_timeo = TX_TIMEOUT;
> + SET_ETHTOOL_OPS(dev, &enc424j600_ethtool_ops);
> +
> + enc424j600_lowpower(priv, true);
> +
> + ret = register_netdev(dev);
> + if (ret) {
> + if (netif_msg_probe(priv))
> + dev_err(&spi->dev, "register netdev " DRV_NAME
> + " failed (ret = %d)\n", ret);
> + goto error_register;
> + }
> + dev_info(&dev->dev, DRV_NAME " driver registered\n");
> +
> + return 0;
out:
return ret;
> +
> +error_register:
> + free_irq(spi->irq, priv);
> +error_irq:
> + free_netdev(dev);
> + if (!enc424j600_enable_dma)
> + kfree(priv->spi_rx_buf);
> +error_rx_buf:
> + if (!enc424j600_enable_dma)
> + kfree(priv->spi_tx_buf);
> +error_tx_buf:
> + if (enc424j600_enable_dma) {
> + dma_free_coherent(&spi->dev, PAGE_SIZE,
> + priv->spi_tx_buf, priv->spi_tx_dma);
> + }
> +error_alloc:
> + return ret;
> +}
--
Ueimor
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
@ 2011-01-29 8:03 Balaji Venkatachalam
2011-01-29 11:58 ` Francois Romieu
0 siblings, 1 reply; 14+ messages in thread
From: Balaji Venkatachalam @ 2011-01-29 8:03 UTC (permalink / raw)
To: netdev
Cc: mohan, blue.cube, lanconelli.claudio, Sriram Subramanian, vbalaji.acs
From: Balaji Venkatachalam <balaji.v@thotakaa.com>
Updated patch for Microchip enc424j600 ethernet chip controlled via SPI.
I tested it on my custom board with ARM9 (Freescale i.MX233) with
Kernel 2.6.31.14.
Changes done since V1.27 to V1.28
1. did some code formatting at line no 110
Changes done since V1.24 to V1.27
1. Timeout Mechanism implemented for enc424j600_soft_reset function
2. Timeout Mechanism implemented for enc424j600_wait_for_autoneg function
3. Window Naming changed to enum
4. Removed WRITEVERIFY functionality
Todo List:
1. Low Power Mode Functionality implementation
2. Provide Support for On-Chip DMA.
3. Remove mutex_lock wherever not required
Any comments are welcome.
Signed-off-by: Balaji Venkatachalam <balaji.v@thotakaa.com>
---
diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600.c
b/drivers/net/enc424j600.c
--- a/drivers/net/enc424j600.c 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/enc424j600.c 2011-01-29 13:26:31.000000000 +0530
@@ -0,0 +1,1712 @@
+/*
+ * Microchip ENC424J600 ethernet driver (MAC + PHY) on SPI bus
+ *
+ * Copyright (C) 2011 Thotaka Technologies Pvt Ltd
+ * Author: Balaji Venkatachalam <balaji.v@thotakaa.com>
+ * based on enc424j600.c written by Kuba Marek
+ * based on enc28j60.c written by Claudio Lanconelli
+ *
+ * Changes done since V1.27 to V1.28
+ * 1. did some code formatting at line no 110
+ *
+ * Changes done since V1.24 to V1.27
+ * 1. Timeout Mechanism implemented for enc424j600_soft_reset function
+ * 2. Timeout Mechanism implemented for enc424j600_wait_for_autoneg function
+ * 3. Window Naming changed to enum
+ * 4. Removed WRITEVERIFY functionality
+ *
+ * Todo List:
+ * 1. Low Power Mode Functionality implementation
+ * 2. Provide Support for On-Chip DMA
+ * 3. Remove mutex_lock wherever not required
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+
+#include "enc424j600_hw.h"
+
+#define DRV_NAME "enc424j600"
+#define DRV_VERSION "1.28"
+
+#define ENC424J600_MSG_DEFAULT \
+ (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
+
+#define SPI_TRANSFER_BUF_LEN (4 + MAX_FRAMELEN)
+#define TX_TIMEOUT (4 * HZ)
+
+/* Max TX retries in case of collision as suggested by errata datasheet */
+#define MAX_TX_RETRYCOUNT 16
+
+#define SPI_OPLEN 1
+
+#define SRAMSIZE 0x6000
+#define TXSTART 0x0000
+#define RXSTART 0x1600
+
+static int enc424j600_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */
+
+enum {
+ RXFILTER_NORMAL,
+ RXFILTER_MULTI,
+ RXFILTER_PROMISC
+};
+enum {
+ RXWINDOW,
+ USERWINDOW,
+ GPWINDOW
+};
+
+/* Driver local data */
+struct enc424j600_net {
+ struct net_device *netdev;
+ struct spi_device *spi;
+ struct mutex lock;
+ struct sk_buff *tx_skb;
+ struct work_struct tx_work;
+ struct work_struct irq_work;
+ struct work_struct setrx_work;
+ struct work_struct restart_work;
+ u8 bank; /* current register bank selected */
+ u16 next_pk_ptr; /* next packet pointer within FIFO */
+ u16 max_pk_counter; /* statistics: max packet counter */
+ u16 tx_retry_count;
+ bool hw_enable;
+ bool full_duplex;
+ bool autoneg;
+ bool speed100;
+ int rxfilter;
+ u32 msg_enable;
+
+ u8 *spi_rx_buf;
+ u8 *spi_tx_buf;
+ dma_addr_t spi_tx_dma;
+ dma_addr_t spi_rx_dma;
+};
+
+/* use ethtool to change the level for any given device */
+static struct {
+ u32 msg_enable;
+} debug = { -1 };
+
+static int enc424j600_spi_trans(struct enc424j600_net *priv, int len)
+{
+ /*modified to suit half duplexed spi */
+ struct spi_transfer tt = {
+ .tx_buf = priv->spi_tx_buf,
+ .len = SPI_OPLEN,
+ };
+ struct spi_transfer tr = {
+ .rx_buf = priv->spi_rx_buf,
+ .len = len,
+ };
+ struct spi_message m;
+ int ret;
+
+ spi_message_init(&m);
+
+ spi_message_add_tail(&tt, &m);
+ spi_message_add_tail(&tr, &m);
+
+ ret = spi_sync(priv->spi, &m);
+
+ if (ret == 0)
+ memcpy(priv->spi_rx_buf, tr.rx_buf, len);
+
+ if (ret)
+ dev_err(&priv->spi->dev,
+ "spi transfer failed: ret = %d\n", ret);
+ return ret;
+}
+
+/*
+ * Read data from chip SRAM.
+ * window = 0 for Receive Buffer
+ * = 1 for User Defined area
+ * = 2 for General Purpose area
+ */
+static int enc424j600_read_sram(struct enc424j600_net *priv,
+ u8 *dst, int len, u16 srcaddr, int window)
+{
+ int ret;
+
+ if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+ return -EINVAL;
+
+ /* First set the write pointer as per selected window */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXRDPT;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDARDPT;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPRDPT;
+
+ priv->spi_tx_buf[1] = srcaddr & 0xFF;
+ priv->spi_tx_buf[2] = srcaddr >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+
+ /* Transfer the data */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = RRXDATA;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = RUDADATA;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = RGPDATA;
+
+ ret = enc424j600_spi_trans(priv, len + 1);
+ /*READ*/
+ /* Copy the data from the rx buffer */
+ memcpy(dst, &priv->spi_rx_buf[0], len);
+
+ return ret;
+}
+
+/*
+ * Write data to chip SRAM.
+ * window = 1 for RX
+ * window = 2 for User Data
+ * window = 3 for GP
+ */
+static int enc424j600_write_sram(struct enc424j600_net *priv,
+ const u8 *src, int len, u16 dstaddr,
+ int window)
+{
+ int ret;
+
+ if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+ return -EINVAL;
+
+ /* First set the general purpose write pointer */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXWRPT;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDAWRPT;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPWRPT;
+
+ priv->spi_tx_buf[1] = dstaddr & 0xFF;
+ priv->spi_tx_buf[2] = dstaddr >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+
+ /* Copy the data to the tx buffer */
+ memcpy(&priv->spi_tx_buf[1], src, len);
+
+ /* Transfer the data */
+ if (window == RXWINDOW)
+ priv->spi_tx_buf[0] = WRXDATA;
+ else if (window == USERWINDOW)
+ priv->spi_tx_buf[0] = WUDADATA;
+ else if (window == GPWINDOW)
+ priv->spi_tx_buf[0] = WGPDATA;
+
+ ret = spi_write(priv->spi, priv->spi_tx_buf, len + 1);
+
+ return ret;
+}
+
+/*
+ * Select the current register bank if necessary to be able to read @addr.
+ */
+static void enc424j600_set_bank(struct enc424j600_net *priv, u8 addr)
+{
+ u8 b = (addr & BANK_MASK) >> BANK_SHIFT;
+
+ /* These registers are present in all banks, no need to switch bank */
+ if (addr >= EUDASTL && addr <= ECON1H)
+ return;
+ if (priv->bank == b)
+ return;
+
+ priv->spi_tx_buf[0] = BXSEL(b);
+
+ enc424j600_spi_trans(priv, 1);
+ /*WRITE*/ priv->bank = b;
+}
+
+/*
+ * Set bits in an 8bit SFR.
+ */
+static void enc424j600_set_bits(struct enc424j600_net *priv, u8 addr, u8 mask)
+{
+ enc424j600_set_bank(priv, addr);
+ priv->spi_tx_buf[0] = BFS(addr);
+ priv->spi_tx_buf[1] = mask;
+ spi_write(priv->spi, priv->spi_tx_buf, 2);
+}
+
+/*
+ * Clear bits in an 8bit SFR.
+ */
+static void enc424j600_clear_bits(struct enc424j600_net *priv, u8
addr, u8 mask)
+{
+ enc424j600_set_bank(priv, addr);
+ priv->spi_tx_buf[0] = BFC(addr);
+ priv->spi_tx_buf[1] = mask;
+ spi_write(priv->spi, priv->spi_tx_buf, 2);
+}
+
+/*
+ * Write a 8bit special function register.
+ * The @sfr parameters takes address of the register.
+ * Uses banked write instruction.
+ */
+static int enc424j600_write_8b_sfr(struct enc424j600_net *priv, u8
sfr, u8 data)
+{
+ int ret;
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = data & 0xFF;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 2);
+
+ return ret;
+}
+
+/*
+ * Read a 8bit special function register.
+ * The @sfr parameters takes address of the register.
+ * Uses banked read instruction.
+ */
+static int enc424j600_read_8b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u8 *data)
+{
+ int ret;
+
+ enc424j600_set_bank(priv, sfr);
+ priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
+ ret = enc424j600_spi_trans(priv, 2);
+ /*READ*/ *data = priv->spi_rx_buf[0];
+
+ return ret;
+}
+
+/*
+ * Write a 16bit special function register.
+ * The @sfr parameters takes address of the low byte of the register.
+ * Takes care of the endiannes & buffers.
+ * Uses banked write instruction.
+ */
+
+static int enc424j600_write_16b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u16 data)
+{
+ int ret;
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = WCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = data & 0xFF;
+ priv->spi_tx_buf[2] = data >> 8;
+ ret = spi_write(priv->spi, priv->spi_tx_buf, 3);
+ if (ret && netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
+ __func__, ret);
+
+ return ret;
+}
+
+/*
+ * Read a 16bit special function register.
+ * The @sfr parameters takes address of the low byte of the register.
+ * Takes care of the endiannes & buffers.
+ * Uses banked read instruction.
+ */
+static int enc424j600_read_16b_sfr(struct enc424j600_net *priv,
+ u8 sfr, u16 *data)
+{
+ int ret;
+ enc424j600_set_bank(priv, sfr);
+
+ priv->spi_tx_buf[0] = RCR(sfr & ADDR_MASK);
+ priv->spi_tx_buf[1] = 0;
+ priv->spi_tx_buf[2] = 0;
+ priv->spi_tx_buf[3] = 0;
+ ret = enc424j600_spi_trans(priv, 3);
+ /*READ*/ *data = priv->spi_rx_buf[0] | priv->spi_rx_buf[1] << (u16) 8;
+
+ return ret;
+}
+
+static unsigned long msec20_to_jiffies;
+
+/*
+ * Wait for bits in register to become equal to @readyMask, but at most 20ms.
+ */
+static int checktimeout_16bit(struct enc424j600_net *priv,
+ u8 reg, u16 mask, u16 readyMask)
+{
+ unsigned long timeout = jiffies + msec20_to_jiffies;
+ u16 value;
+ /* 20 msec timeout read */
+ enc424j600_read_16b_sfr(priv, reg, &value);
+ while ((value & mask) != readyMask) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_read_16b_sfr(priv, reg, &value);
+ }
+
+ return 0;
+}
+
+static int checktimeout_8bit(struct enc424j600_net *priv,
+ u8 reg, u8 mask, u8 readyMask)
+{
+ unsigned long timeout = jiffies + msec20_to_jiffies;
+ u8 value;
+ /* 20 msec timeout read */
+ enc424j600_read_8b_sfr(priv, reg, &value);
+ while ((value & mask) != readyMask) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_read_8b_sfr(priv, reg, &value);
+ }
+
+ return 0;
+}
+
+/*
+ * Reset the enc424j600.
+ */
+static int enc424j600_soft_reset(struct enc424j600_net *priv)
+{
+ int ret;
+ u16 eudast;
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ enc424j600_write_16b_sfr(priv, EUDASTL, EUDAST_TEST_VAL);
+ ret = checktimeout_16bit(priv, EUDASTL, 0xFFFF, EUDAST_TEST_VAL);
+ if (ret != 0)
+ return ret;
+ ret = checktimeout_16bit(priv, ESTATH, CLKRDY, CLKRDY);
+ if (ret != 0)
+ return ret;
+
+ priv->spi_tx_buf[0] = SETETHRST;
+ enc424j600_spi_trans(priv, 1);
+ /*inline with the datasheet */
+ udelay(25);
+
+ enc424j600_read_16b_sfr(priv, EUDASTL, &eudast);
+ if (netif_msg_hw(priv) && eudast != 0)
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() EUDASTL is not zero!\n", __func__);
+ /*inline with the datasheet */
+ /*datasheet says to wait for 256 usec atleast */
+ udelay(300);
+ return 0;
+}
+
+/*
+ * PHY register read
+ * PHY registers are not accessed directly, but through the MII
+ */
+static int enc424j600_phy_read(struct enc424j600_net *priv,
+ u16 address, u16 *data)
+{
+ int ret;
+
+ enc424j600_write_16b_sfr(priv, MIREGADRL,
+ address | (MIREGADRH_VAL << 8));
+ enc424j600_write_16b_sfr(priv, MICMDL, MIIRD);
+ udelay(26);
+ ret = !checktimeout_8bit(priv, MISTATL, BUSY, 0);
+ enc424j600_write_16b_sfr(priv, MICMDL, 0);
+ enc424j600_read_16b_sfr(priv, MIRDL, data);
+ return ret;
+}
+
+static int enc424j600_phy_write(struct enc424j600_net *priv, u16 address,
+ u16 data)
+{
+ enc424j600_write_16b_sfr(priv, MIREGADRL,
+ address | (MIREGADRH_VAL << 8));
+ enc424j600_write_16b_sfr(priv, MIWRL, data);
+ udelay(26);
+ return !checktimeout_8bit(priv, MISTATL, BUSY, 0);
+}
+
+/*
+ * Read the hardware MAC address to dev->dev_addr.
+ */
+static int enc424j600_get_hw_macaddr(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ u16 maadr1, maadr2, maadr3;
+
+ mutex_lock(&priv->lock);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MAC address to %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ enc424j600_read_16b_sfr(priv, MAADR3L, &maadr3);
+ ndev->dev_addr[5] = maadr3 >> 8;
+ ndev->dev_addr[4] = maadr3 & 0xff;
+ enc424j600_read_16b_sfr(priv, MAADR2L, &maadr2);
+ ndev->dev_addr[3] = maadr2 >> 8;
+ ndev->dev_addr[2] = maadr2 & 0xff;
+ enc424j600_read_16b_sfr(priv, MAADR1L, &maadr1);
+ ndev->dev_addr[1] = maadr1 >> 8;
+ ndev->dev_addr[0] = maadr1 & 0xff;
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+/*
+ * Program the hardware MAC address from dev->dev_addr.
+ */
+static int enc424j600_set_hw_macaddr(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+
+ mutex_lock(&priv->lock);
+
+ if (priv->hw_enable) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() Hardware must be disabled to set "
+ "Mac address\n", __func__);
+ mutex_unlock(&priv->lock);
+ return -EBUSY;
+ }
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MAC address to %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ enc424j600_write_16b_sfr(priv, MAADR3L,
+ ndev->dev_addr[4] | ndev->dev_addr[5] << 8);
+ enc424j600_write_16b_sfr(priv, MAADR2L,
+ ndev->dev_addr[2] | ndev->dev_addr[3] << 8);
+ enc424j600_write_16b_sfr(priv, MAADR1L,
+ ndev->dev_addr[0] | ndev->dev_addr[1] << 8);
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+/*
+ * Store the new hardware address in dev->dev_addr, and update the MAC.
+ */
+static int enc424j600_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *address = addr;
+
+ if (netif_running(dev))
+ return -EBUSY;
+ if (!is_valid_ether_addr(address->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
+ return enc424j600_set_hw_macaddr(dev);
+}
+
+u8 nolock_regb_read(struct enc424j600_net *priv, u8 address)
+{
+ u8 data;
+ enc424j600_read_8b_sfr(priv, address, &data);
+ return data;
+}
+
+u16 nolock_regw_read(struct enc424j600_net *priv, u8 address)
+{
+ u16 data;
+ enc424j600_read_16b_sfr(priv, address, &data);
+ return data;
+}
+
+/*Debug routine to dump useful register contents*/
+static void enc424j600_dump_regs(struct enc424j600_net *priv, const char *msg)
+{
+
+ mutex_lock(&priv->lock);
+ printk(KERN_DEBUG DRV_NAME " %s\n"
+ "Cntrl: ECON1H ECON1L ECON2H ECON2L ESTATH ESTATL EIRH "
+ "EIRL EIEH EIEL\n"
+ " 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x "
+ "0x%02x 0x%02x 0x%02x 0x%02x\n"
+ "MAC : MACON1 MACON2\n"
+ " 0x%04x 0x%04x\n"
+ "Rx : ERXST ERXTAIL ERXHEAD ERXWRPT ERXRDPT ERXFCON MAMXFL\n"
+ " 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n"
+ "Tx : ETXST ETXLEN MACLCON1 \n"
+ " 0x%04x 0x%04x 0x%02x\n",
+ msg,
+ nolock_regb_read(priv, ECON1H), nolock_regb_read(priv, ECON1L),
+ nolock_regb_read(priv, ECON2H), nolock_regb_read(priv, ECON2L),
+ nolock_regb_read(priv, ESTATH), nolock_regb_read(priv, ESTATL),
+ nolock_regb_read(priv, EIRH), nolock_regb_read(priv, EIRL),
+ nolock_regb_read(priv, EIEH), nolock_regb_read(priv, EIEL),
+ nolock_regw_read(priv, MACON1L), nolock_regw_read(priv, MACON2L),
+ nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXTAILL),
+ nolock_regw_read(priv, ERXHEADL),
+ nolock_regw_read(priv, ERXWRPTL), nolock_regw_read(priv,
+ ERXRDPTL),
+ nolock_regw_read(priv, ERXFCONL), nolock_regw_read(priv,
+ MAMXFLL),
+ nolock_regw_read(priv, ETXSTL), nolock_regw_read(priv, ETXLENL),
+ nolock_regw_read(priv, MACLCONL));
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * TODO: Check the functionality
+ * Low power mode shrinks power consumption about 100x, so we'd like
+ * the chip to be in that mode whenever it's inactive. (However, we
+ * can't stay in lowpower mode during suspend with WOL active.)
+ */
+static void enc424j600_lowpower(struct enc424j600_net *priv, bool is_low)
+{
+
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev, "%s power...\n",
+ is_low ? "low" : "high");
+
+#if 0
+ mutex_lock(&priv->lock);
+ if (is_low) {
+ nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+ checktimeout_8bit(priv, ESTAT, ESTAT_RXBUSY, 0);
+ checktimeout_8bit(priv, ECON1, ECON1_TXRTS, 0);
+ /* ECON2_VRPS was set during initialization */
+ nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
+ } else {
+ nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
+ checktimeout_8bit(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
+ /* caller sets ECON1_RXEN */
+ }
+ mutex_unlock(&priv->lock);
+#endif
+}
+
+static unsigned long msec2000_to_jiffies;
+/* Waits for autonegotiation to complete. */
+static int enc424j600_wait_for_autoneg(struct enc424j600_net *priv)
+{
+ unsigned long timeout = jiffies + msec2000_to_jiffies;
+ u16 value;
+ /* 20 msec timeout read */
+ enc424j600_phy_read(priv, PHSTAT1, &value);
+ while ((value & ANDONE) == 0) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", PHSTAT1);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ enc424j600_phy_read(priv, PHSTAT1, &value);
+ }
+ return 0;
+
+}
+
+/*
+ * Reset and initialize the chip, but don't enable interrupts and don't
+ * start receiving yet.
+ */
+static int enc424j600_hw_init(struct enc424j600_net *priv)
+{
+ u8 eidledl;
+ u16 phcon1;
+ u16 macon2;
+ u16 econ1l;
+ /*priv->autoneg = AUTONEG_ENABLE;*/
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
+ priv->
+ autoneg ? "Autoneg" : (priv->full_duplex ? "FullDuplex" :
+ "HalfDuplex"));
+
+ mutex_lock(&priv->lock);
+
+ priv->bank = 0;
+ priv->hw_enable = false;
+ priv->tx_retry_count = 0;
+ priv->max_pk_counter = 0;
+ priv->rxfilter = RXFILTER_NORMAL;
+
+ if (enc424j600_soft_reset(priv) != 0)
+ return 0;
+
+ /*
+ * Check the device id and silicon revision id.
+ */
+ enc424j600_read_8b_sfr(priv, EIDLEDL, &eidledl);
+
+ if ((eidledl & DEVID_MASK) >> DEVID_SHIFT != ENC424J600_DEV_ID) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": %s() Invalid device ID: %d\n", __func__,
+ (eidledl & DEVID_MASK) >> DEVID_SHIFT);
+ return 0;
+ }
+
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO DRV_NAME ": Silicon revision ID: 0x%02x\n",
+ (eidledl & REVID_MASK) >> REVID_SHIFT);
+
+ enc424j600_write_16b_sfr(priv, ETXSTL, TXSTART);
+ enc424j600_write_16b_sfr(priv, ERXSTL, RXSTART);
+
+ priv->next_pk_ptr = RXSTART;
+ enc424j600_write_16b_sfr(priv, ERXTAILL, SRAMSIZE - 2);
+ enc424j600_write_16b_sfr(priv, ERXFCONL, UCEN | BCEN | CRCEN | RUNTEN);
+
+ enc424j600_phy_write(priv, PHANA, PHANA_DEFAULT);
+
+ /* PHCON1 */
+ phcon1 = 0;
+ if (priv->autoneg) {
+ /* Enable autonegotiation and renegotiate */
+ phcon1 |= ANEN | RENEG;
+ } else {
+ if (priv->speed100)
+ phcon1 |= SPD100;
+ if (priv->full_duplex)
+ phcon1 |= PFULDPX;
+ }
+ enc424j600_phy_write(priv, PHCON1, phcon1);
+
+ /* MACON2
+ * defer transmission if collision occurs (only for half duplex)
+ * pad to 60 or 64 bytes and append CRC
+ * enable receiving huge frames (instead of limiting packet size) */
+ macon2 = MACON2_DEFER | PADCFG2 | PADCFG0 | TXCRCEN | HFRMEN;
+
+ /* If autonegotiation is enabled, we have to wait untill it finishes
+ * and set the PHYDPX bit in MACON2 correctly */
+ if (priv->autoneg) {
+ u8 estath;
+ if (!enc424j600_wait_for_autoneg(priv)) {
+ /* read the PHYDPX bit in ESTAT and set FULDPX in
+ MACON2 accordingly */
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ if (estath & PHYDPX)
+ macon2 |= FULDPX;
+ } else /*if timedout, just disable autoneg */
+ priv->autoneg = AUTONEG_DISABLE;
+ } else if (priv->full_duplex)
+ macon2 |= FULDPX;
+
+ enc424j600_write_16b_sfr(priv, MACON2L, macon2);
+
+ /* MAIPGL
+ * Recomended values for inter packet gaps */
+ if (!priv->autoneg) {
+ enc424j600_write_16b_sfr(priv, MAIPGL,
+ MAIPGL_VAL | (MAIPGH_VAL << 8));
+ }
+
+ /*
+ * Select enabled interrupts, but don't set the global
+ * interrupt enable flag.
+ */
+
+ enc424j600_write_16b_sfr(priv, EIEL,
+ LINKIE << 8 | PKTIE | DMAIE | TXIE | TXABTIE |
+ RXABTIE);
+
+ enc424j600_read_16b_sfr(priv, ECON1L, &econ1l);
+ econ1l |= (RXEN);
+ enc424j600_write_16b_sfr(priv, ECON1L, econ1l);
+
+ mutex_unlock(&priv->lock);
+
+ if (netif_msg_hw(priv))
+ enc424j600_dump_regs(priv, "Hw initialized.");
+
+ return 1;
+}
+
+static void enc424j600_hw_enable(struct enc424j600_net *priv)
+{
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
+ __func__);
+
+ mutex_lock(&priv->lock);
+
+ /* Clear any pending interrupts */
+ enc424j600_write_16b_sfr(priv, EIRL, 0);
+
+ /* Enable global interrupt flag */
+ enc424j600_set_bits(priv, EIEH, INTIE);
+
+ /* enable receive logic */
+ enc424j600_set_bits(priv, ECON1L, RXEN);
+ priv->hw_enable = true;
+ mutex_unlock(&priv->lock);
+}
+
+static void enc424j600_hw_disable(struct enc424j600_net *priv)
+{
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() disabling interrupts.\n",
+ __func__);
+
+ mutex_lock(&priv->lock);
+
+ /* disable receive logic */
+ enc424j600_clear_bits(priv, ECON1L, RXEN);
+
+ /* Disable global interrupt flag */
+ enc424j600_clear_bits(priv, EIEH, INTIE);
+
+ priv->hw_enable = false;
+
+ mutex_unlock(&priv->lock);
+}
+
+static int
+enc424j600_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ int ret = 0;
+ if (!priv->hw_enable) {
+ /* link is in low power mode now; duplex setting
+ * will take effect on next enc424j600_hw_init().
+ */
+ if (speed == SPEED_10 || speed == SPEED_100) {
+ priv->autoneg = (autoneg == AUTONEG_ENABLE);
+ priv->full_duplex = (duplex == DUPLEX_FULL);
+ priv->speed100 = (speed == SPEED_100);
+ } else {
+ if (netif_msg_link(priv))
+ dev_warn(&ndev->dev,
+ "unsupported link setting\n");
+ /*speeds other than SPEED_10 and SPEED_100 */
+ /*are not supported by chip */
+ ret = -EOPNOTSUPP;
+ }
+ } else {
+ if (netif_msg_link(priv))
+ dev_warn(&ndev->dev, "Warning: hw must be disabled "
+ "to set link mode\n");
+ ret = -EBUSY;
+ }
+ return ret;
+}
+
+/*
+ * Receive Status vector
+ */
+static void enc424j600_dump_rsv(struct enc424j600_net *priv, const char *msg,
+ u16 pk_ptr, int len, u16 sts)
+{
+ printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
+ msg, pk_ptr);
+ printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
+ RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
+ printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
+ " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
+ RSV_GETBIT(sts, RSV_CRCERROR),
+ RSV_GETBIT(sts, RSV_LENCHECKERR),
+ RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
+ printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
+ "LongDropEvent: %d, CarrierEvent: %d\n",
+ RSV_GETBIT(sts, RSV_RXMULTICAST),
+ RSV_GETBIT(sts, RSV_RXBROADCAST),
+ RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
+ RSV_GETBIT(sts, RSV_CARRIEREV));
+ printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
+ " UnknownOp: %d, VLanTagFrame: %d\n",
+ RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
+ RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
+ RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
+ RSV_GETBIT(sts, RSV_RXTYPEVLAN));
+}
+
+static void dump_packet(const char *msg, int len, const char *data)
+{
+
+ printk(KERN_ALERT ": %s - packet len:%d\n", msg, len);
+ print_hex_dump(KERN_ALERT, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
+ data, len, true);
+}
+
+/*
+ * Calculate wrap around when reading beyond the end of the RX buffer
+ */
+static u16 rx_packet_start(u16 ptr)
+{
+ if (ptr + RSV_SIZE > RXEND_INIT)
+ return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART + 1);
+ else
+ return ptr + RSV_SIZE;
+}
+
+/*
+ * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
+ */
+static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
+{
+ u16 erxrdpt;
+ if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
+ erxrdpt = end;
+ else
+ erxrdpt = next_packet_ptr - 1;
+
+ return erxrdpt;
+}
+
+static void nolock_rxfifo_init(struct enc424j600_net *priv, u16 start, u16 end)
+{
+ u16 erxrdpt;
+ if (start > 0x5FFF || end > 0x5FFF || start > end) {
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
+ "bad parameters!\n", __func__, start, end);
+ return;
+ }
+ /* set receive buffer start + end */
+ priv->next_pk_ptr = start;
+ enc424j600_write_16b_sfr(priv, ERXSTL, start);
+ erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
+ enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
+ enc424j600_write_16b_sfr(priv, ERXTAILL, end);
+}
+
+/*
+ * Hardware receive function.
+ * Read the buffer memory, update the FIFO pointer to free the buffer,
+ * check the status vector and decrement the packet counter.
+ */
+static void enc424j600_hw_rx(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+ struct sk_buff *skb = NULL;
+ u16 erxrdpt, next_packet, rxstat;
+ u8 pkcnt;
+ u16 head, tail;
+ u8 rsv[RSV_SIZE];
+ u16 newrxtail;
+ int len;
+
+ if (netif_msg_rx_status(priv))
+ printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
+ priv->next_pk_ptr);
+ if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev,
+ "%s() Invalid packet address!! 0x%04x\n",
+ __func__, priv->next_pk_ptr);
+ mutex_lock(&priv->lock);
+ enc424j600_clear_bits(priv, ECON1L, RXEN);
+ enc424j600_set_bits(priv, ECON2L, RXRST);
+ enc424j600_clear_bits(priv, ECON2L, RXRST);
+ nolock_rxfifo_init(priv, RXSTART, RXEND_INIT);
+ enc424j600_clear_bits(priv, EIRL, RXABTIF);
+ enc424j600_set_bits(priv, ECON1L, RXEN);
+ mutex_unlock(&priv->lock);
+ ndev->stats.rx_errors++;
+ return;
+ }
+
+ /* Read next packet pointer and rx status vector */
+ enc424j600_read_sram(priv, rsv, sizeof(rsv), priv->next_pk_ptr,
+ RXWINDOW);
+
+ next_packet = rsv[1];
+ next_packet <<= 8;
+ next_packet |= rsv[0];
+
+ len = rsv[3];
+ len <<= 8;
+ len |= rsv[2];
+
+ rxstat = rsv[5];
+ rxstat <<= 8;
+ rxstat |= rsv[4];
+
+ if (netif_msg_rx_status(priv))
+ enc424j600_dump_rsv(priv, __func__, next_packet, len, rxstat);
+
+ if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
+ ndev->stats.rx_errors++;
+ if (RSV_GETBIT(rxstat, RSV_CRCERROR))
+ ndev->stats.rx_crc_errors++;
+ if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
+ ndev->stats.rx_frame_errors++;
+ if (len > MAX_FRAMELEN)
+ ndev->stats.rx_over_errors++;
+ } else {
+ skb = dev_alloc_skb(len + NET_IP_ALIGN);
+ if (!skb) {
+ if (netif_msg_rx_err(priv))
+ dev_err(&ndev->dev,
+ "out of memory for Rx'd frame\n");
+ ndev->stats.rx_dropped++;
+ } else {
+ skb->dev = ndev;
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ /* copy the packet from the receive buffer */
+ enc424j600_read_sram(priv, skb_put(skb, len), len,
+ rx_packet_start(priv->next_pk_ptr),
+ RXWINDOW);
+
+ if (netif_msg_pktdata(priv))
+ dump_packet(__func__, skb->len, skb->data);
+ skb->protocol = eth_type_trans(skb, ndev);
+ /* update statistics */
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += len;
+ netif_rx_ni(skb);
+ }
+ }
+ newrxtail = next_packet - 2;
+ if (next_packet == RXSTART)
+ newrxtail = SRAMSIZE - 2;
+
+ enc424j600_write_16b_sfr(priv, ERXTAILL, newrxtail);
+ /*
+ * Move the RX read pointer to the start of the next
+ * received packet.
+ * This frees the memory we just read out
+ */
+ erxrdpt = erxrdpt_workaround(next_packet, RXSTART, RXEND_INIT);
+ if (netif_msg_hw(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n", __func__,
+ erxrdpt);
+
+ /*TODO: remove mutex_lock wherever not required*/
+ mutex_lock(&priv->lock);
+ enc424j600_write_16b_sfr(priv, ERXRDPTL, erxrdpt);
+
+ priv->next_pk_ptr = next_packet;
+ enc424j600_read_8b_sfr(priv, ESTATL, &pkcnt);
+ enc424j600_read_16b_sfr(priv, ERXHEADL, &head);
+ enc424j600_read_16b_sfr(priv, ERXTAILL, &tail);
+ /* we are done with this packet, decrement the packet counter */
+ enc424j600_set_bits(priv, ECON1H, PKTDEC);
+
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * Access the PHY to determine link status
+ */
+static void enc424j600_check_link_status(struct enc424j600_net *priv)
+{
+ u8 estath;
+ u16 macon2;
+
+ enc424j600_read_8b_sfr(priv, ESTATH, &estath);
+ if (estath & PHYLNK) {
+ if (priv->autoneg) {
+ if (!enc424j600_wait_for_autoneg(priv)) {
+ if (estath & PHYDPX) {
+ printk(KERN_ALERT "Full Duplex");
+ enc424j600_read_16b_sfr(priv, MACON2L,
+ &macon2);
+ macon2 |= FULDPX;
+ enc424j600_write_16b_sfr(priv, MACON2L,
+ macon2);
+ }
+ } else /*if timed out, disable autoneg and continue */
+ priv->autoneg = AUTONEG_DISABLE;
+ }
+ netif_carrier_on(priv->netdev);
+ if (netif_msg_ifup(priv))
+ dev_info(&(priv->netdev->dev), "link up\n");
+ } else {
+ if (netif_msg_ifdown(priv))
+ dev_info(&(priv->netdev->dev), "link down\n");
+ netif_carrier_off(priv->netdev);
+ }
+}
+
+static void enc424j600_tx_clear(struct enc424j600_net *priv, bool err)
+{
+ struct net_device *ndev = priv->netdev;
+ if (err)
+ ndev->stats.tx_errors++;
+ else
+ ndev->stats.tx_packets++;
+
+ if (priv->tx_skb) {
+ if (!err)
+ ndev->stats.tx_bytes += priv->tx_skb->len;
+ dev_kfree_skb(priv->tx_skb);
+ priv->tx_skb = NULL;
+ }
+
+ netif_wake_queue(ndev);
+}
+
+static int enc424j600_int_rx_abbort_handler(struct enc424j600_net *priv,
+ int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intRXAbt(%d)\n", loop);
+ mutex_lock(&priv->lock);
+ priv->netdev->stats.rx_dropped++;
+ enc424j600_clear_bits(priv, EIRL, RXABTIF);
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_link_handler(struct enc424j600_net *priv, int loop)
+{
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intLINK(%d)\n", loop);
+
+ /* we check more than is necessary here --
+ * only PHYLNK would be needed. */
+ enc424j600_check_link_status(priv);
+
+ return loop;
+}
+
+static int enc424j600_int_tx_handler(struct enc424j600_net *priv, int loop)
+{
+ loop++;
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intTX(%d)\n", loop);
+
+ mutex_lock(&priv->lock);
+ enc424j600_tx_clear(priv, false);
+ enc424j600_clear_bits(priv, EIRL, TXIF);
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_tx_err_handler(struct enc424j600_net *priv, int loop)
+{
+ u8 etxstat;
+ loop++;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intTXErr(%d)\n", loop);
+
+ mutex_lock(&priv->lock);
+
+ enc424j600_read_8b_sfr(priv, ETXSTATH, &etxstat);
+
+ if (etxstat & LATECOL) {
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG DRV_NAME
+ ": Late collision TXErr (%d)\n",
+ priv->tx_retry_count);
+ if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
+ enc424j600_set_bits(priv, ECON1L, TXRTS);
+ else
+ enc424j600_tx_clear(priv, true);
+ } else if (etxstat & MAXCOL) {
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG DRV_NAME ": Max collisions TXErr\n");
+ enc424j600_tx_clear(priv, true);
+ } else {
+ enc424j600_tx_clear(priv, true);
+ }
+
+ mutex_unlock(&priv->lock);
+
+ return loop;
+}
+
+static int enc424j600_int_received_packet_handler(struct enc424j600_net *priv)
+{
+ uint8_t pk_counter;
+ int ret;
+
+ enc424j600_read_8b_sfr(priv, ESTATL, &pk_counter);
+ if (pk_counter && netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
+ if (pk_counter > priv->max_pk_counter) {
+ /* update statistics */
+ priv->max_pk_counter = pk_counter;
+ if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
+ printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
+ priv->max_pk_counter);
+ }
+ ret = pk_counter;
+ while (pk_counter-- > 0)
+ enc424j600_hw_rx(priv->netdev);
+ return ret;
+}
+
+static void enc424j600_irq_work_handler(struct work_struct *work)
+{
+
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, irq_work);
+ int loop;
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ /* disable further interrupts */
+ enc424j600_clear_bits(priv, EIEH, INTIE);
+
+ do {
+ u16 intflags;
+ enc424j600_read_16b_sfr(priv, EIRL, &intflags);
+ loop = 0;
+
+ /* LINK changed handler */
+ if ((intflags & LINKIF) != 0)
+ loop = enc424j600_int_link_handler(priv, loop);
+
+ /* TX complete handler */
+ if ((intflags & TXIF) != 0)
+ loop = enc424j600_int_tx_handler(priv, loop);
+
+ /* TX Error handler */
+ if ((intflags & TXABTIF) != 0) {
+ printk(KERN_ALERT "ABORTING TRANSMITTING PACKET");
+ loop = enc424j600_int_tx_err_handler(priv, loop);
+ }
+ /* RX Error handler */
+ if ((intflags & RXABTIF) != 0) {
+ printk(KERN_ALERT "ABORTING RECEIVED PACKET");
+ loop = enc424j600_int_rx_abbort_handler(priv, loop);
+ }
+ /* RX handler */
+ if ((intflags & PKTIF) != 0)
+ loop = enc424j600_int_received_packet_handler(priv);
+ enc424j600_clear_bits(priv, EIRL, intflags && 0xff);
+ enc424j600_clear_bits(priv, EIRH, intflags >> 8);
+ } while (loop);
+ /* re-enable interrupts */
+ enc424j600_set_bits(priv, EIEH, INTIE);
+
+ if (netif_msg_intr(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
+}
+
+void locked_reg_bfset(struct enc424j600_net *priv, u8 addr, u8 mask)
+{
+ mutex_lock(&priv->lock);
+ enc424j600_set_bits(priv, addr, mask);
+ mutex_unlock(&priv->lock);
+}
+
+/*
+ * Hardware transmit function.
+ * Fill the buffer memory and send the contents of the transmit buffer
+ * onto the network
+ */
+static void enc424j600_hw_tx(struct enc424j600_net *priv)
+{
+ if (!priv->tx_skb) {
+ enc424j600_tx_clear(priv, false);
+ return;
+ }
+
+ if (netif_msg_tx_queued(priv))
+ printk(KERN_DEBUG DRV_NAME ": Tx Packet Len:%d\n",
+ priv->tx_skb->len);
+
+ if (netif_msg_pktdata(priv))
+ dump_packet(__func__, priv->tx_skb->len, priv->tx_skb->data);
+
+ enc424j600_write_sram(priv, priv->tx_skb->data, priv->tx_skb->len,
+ TXSTART, GPWINDOW);
+
+ /* Set the tx pointer to start of general purpose SRAM area */
+ enc424j600_write_16b_sfr(priv, ETXSTL, TXSTART);
+
+ /* Write the transfer length */
+ enc424j600_write_16b_sfr(priv, ETXLENL, priv->tx_skb->len);
+
+ /* set TX request flag */
+ locked_reg_bfset(priv, ECON1L, TXRTS);
+}
+
+static int enc424j600_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+ if (netif_msg_tx_queued(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ /* If some error occurs while trying to transmit this
+ * packet, you should return '1' from this function.
+ * In such a case you _may not_ do anything to the
+ * SKB, it is still owned by the network queueing
+ * layer when an error is returned. This means you
+ * may not modify any SKB fields, you may not free
+ * the SKB, etc.
+ */
+ netif_stop_queue(dev);
+
+ /* save the timestamp */
+ priv->netdev->trans_start = jiffies;
+ /* Remember the skb for deferred processing */
+ priv->tx_skb = skb;
+ schedule_work(&priv->tx_work);
+
+ return NETDEV_TX_OK;
+}
+
+static void enc424j600_tx_work_handler(struct work_struct *work)
+{
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, tx_work);
+
+ /* actual delivery of data */
+ enc424j600_hw_tx(priv);
+}
+
+static irqreturn_t enc424j600_irq(int irq, void *dev_id)
+{
+ struct enc424j600_net *priv = dev_id;
+ /*
+ * Can't do anything in interrupt context because we need to
+ * block (spi_sync() is blocking) so fire of the interrupt
+ * handling workqueue.
+ * Remember that we access enc424j600 registers through SPI bus
+ * via spi_sync() call.
+ */
+ schedule_work(&priv->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void enc424j600_tx_timeout(struct net_device *ndev)
+{
+ struct enc424j600_net *priv = netdev_priv(ndev);
+
+ if (netif_msg_timer(priv))
+ dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
+
+ ndev->stats.tx_errors++;
+ /* can't restart safely under softirq */
+ schedule_work(&priv->restart_work);
+}
+
+/*
+ * Open/initialize the board. This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+static int enc424j600_net_open(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ if (netif_msg_ifup(priv))
+ dev_err(&dev->dev, "invalid MAC address %pM\n",
+ dev->dev_addr);
+ return -EADDRNOTAVAIL;
+ }
+ /* Reset the hardware here (and take it out of low power mode) */
+ enc424j600_lowpower(priv, false);
+ enc424j600_hw_disable(priv);
+ if (!enc424j600_hw_init(priv)) {
+ if (netif_msg_ifup(priv))
+ dev_err(&dev->dev, "hw_reset() failed\n");
+ return -EINVAL;
+ }
+ /* Update the MAC address (in case user has changed it) */
+ enc424j600_set_hw_macaddr(dev);
+ /* Enable interrupts */
+ enc424j600_hw_enable(priv);
+ /* check link status */
+ enc424j600_check_link_status(priv);
+ /* We are now ready to accept transmit requests from
+ * the queueing layer of the networking.
+ */
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/* The inverse routine to net_open(). */
+static int enc424j600_net_close(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+ enc424j600_hw_disable(priv);
+ enc424j600_lowpower(priv, true);
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+/*
+ * Set or clear the multicast filter for this adapter
+ * num_addrs == -1 Promiscuous mode, receive all packets
+ * num_addrs == 0 Normal mode, filter out multicast packets
+ * num_addrs > 0 Multicast mode, receive normal and MC packets
+ */
+static void enc424j600_set_multicast_list(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+ int oldfilter = priv->rxfilter;
+
+ if (dev->flags & IFF_PROMISC) {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "promiscuous mode\n");
+ priv->rxfilter = RXFILTER_PROMISC;
+ } else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "%smulticast mode\n",
+ (dev->flags & IFF_ALLMULTI) ? "all-" : "");
+ priv->rxfilter = RXFILTER_MULTI;
+ } else {
+ if (netif_msg_link(priv))
+ dev_info(&dev->dev, "normal mode\n");
+ priv->rxfilter = RXFILTER_NORMAL;
+ }
+
+ if (oldfilter != priv->rxfilter)
+ schedule_work(&priv->setrx_work);
+}
+
+void locked_regb_write(struct enc424j600_net *priv, u8 address, u8 data)
+{
+ mutex_lock(&priv->lock);
+ enc424j600_write_8b_sfr(priv, address, data);
+ mutex_unlock(&priv->lock);
+}
+
+static void enc424j600_setrx_work_handler(struct work_struct *work)
+{
+ u16 macon1;
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, setrx_work);
+
+ if (priv->rxfilter == RXFILTER_PROMISC) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
+ enc424j600_read_16b_sfr(priv, MACON1L, &macon1);
+ macon1 = macon1 | PASSALL;
+ enc424j600_write_16b_sfr(priv, MACON1L, macon1);
+ locked_regb_write(priv, ERXFCONL, UCEN | MCEN | NOTMEEN);
+ } else if (priv->rxfilter == RXFILTER_MULTI) {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
+ locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN | MCEN);
+
+ } else {
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": normal mode\n");
+ locked_regb_write(priv, ERXFCONL, UCEN | CRCEN | BCEN);
+
+ }
+}
+
+static void enc424j600_restart_work_handler(struct work_struct *work)
+{
+ struct enc424j600_net *priv =
+ container_of(work, struct enc424j600_net, restart_work);
+ struct net_device *ndev = priv->netdev;
+ int ret;
+
+ rtnl_lock();
+ if (netif_running(ndev)) {
+ enc424j600_net_close(ndev);
+ ret = enc424j600_net_open(ndev);
+ if (unlikely(ret)) {
+ dev_info(&ndev->dev, " could not restart %d\n", ret);
+ dev_close(ndev);
+ }
+ }
+ rtnl_unlock();
+}
+
+/* ......................... ETHTOOL SUPPORT ........................... */
+
+static void
+enc424j600_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+ strlcpy(info->bus_info,
+ dev_name(dev->dev.parent), sizeof(info->bus_info));
+}
+
+static int
+enc424j600_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->supported = SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_TP;
+
+ cmd->speed = priv->speed100 ? SPEED_100 : SPEED_10;
+ cmd->duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
+ cmd->port = PORT_TP;
+ cmd->autoneg = priv->autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+ return 0;
+}
+
+static int
+enc424j600_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ return enc424j600_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
+}
+
+static u32 enc424j600_get_msglevel(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ return priv->msg_enable;
+}
+
+static void enc424j600_set_msglevel(struct net_device *dev, u32 val)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ priv->msg_enable = val;
+}
+
+static const struct ethtool_ops enc424j600_ethtool_ops = {
+ .get_settings = enc424j600_get_settings,
+ .set_settings = enc424j600_set_settings,
+ .get_drvinfo = enc424j600_get_drvinfo,
+ .get_msglevel = enc424j600_get_msglevel,
+ .set_msglevel = enc424j600_set_msglevel,
+};
+
+static int enc424j600_chipset_init(struct net_device *dev)
+{
+ struct enc424j600_net *priv = netdev_priv(dev);
+
+ enc424j600_get_hw_macaddr(dev);
+ return enc424j600_hw_init(priv);
+
+}
+
+static const struct net_device_ops enc424j600_netdev_ops = {
+ .ndo_open = enc424j600_net_open,
+ .ndo_stop = enc424j600_net_close,
+ .ndo_start_xmit = enc424j600_send_packet,
+ .ndo_set_multicast_list = enc424j600_set_multicast_list,
+ .ndo_set_mac_address = enc424j600_set_mac_address,
+ .ndo_tx_timeout = enc424j600_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int __devinit enc424j600_probe(struct spi_device *spi)
+{
+ struct net_device *dev;
+ struct enc424j600_net *priv;
+ int ret = 0;
+
+ if (netif_msg_drv(&debug))
+ dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
+ DRV_VERSION);
+
+ dev = alloc_etherdev(sizeof(struct enc424j600_net));
+ if (!dev) {
+ if (netif_msg_drv(&debug))
+ dev_err(&spi->dev, DRV_NAME
+ ": unable to alloc new ethernet\n");
+ ret = -ENOMEM;
+ goto error_alloc;
+ }
+ priv = netdev_priv(dev);
+
+ priv->netdev = dev; /* priv to netdev reference */
+ priv->spi = spi; /* priv to spi reference */
+ priv->msg_enable = netif_msg_init(debug.msg_enable,
+ ENC424J600_MSG_DEFAULT);
+ mutex_init(&priv->lock);
+ INIT_WORK(&priv->tx_work, enc424j600_tx_work_handler);
+ INIT_WORK(&priv->setrx_work, enc424j600_setrx_work_handler);
+ INIT_WORK(&priv->irq_work, enc424j600_irq_work_handler);
+ INIT_WORK(&priv->restart_work, enc424j600_restart_work_handler);
+ dev_set_drvdata(&spi->dev, priv); /* spi to priv reference */
+ SET_NETDEV_DEV(dev, &spi->dev);
+ /*TODO: chip DMA features to be utilized */
+ /* If requested, allocate DMA buffers */
+ if (enc424j600_enable_dma) {
+ spi->dev.coherent_dma_mask = ~0;
+
+ /*
+ * Minimum coherent DMA allocation is PAGE_SIZE, so allocate
+ * that much and share it between Tx and Rx DMA buffers.
+ */
+#if SPI_TRANSFER_BUF_LEN > PAGE_SIZE / 2
+#error "A problem in DMA buffer allocation"
+#endif
+ priv->spi_tx_buf = dma_alloc_coherent(&spi->dev,
+ PAGE_SIZE,
+ &priv->spi_tx_dma,
+ GFP_DMA);
+
+ if (priv->spi_tx_buf) {
+ priv->spi_rx_buf = (u8 *) (priv->spi_tx_buf +
+ (PAGE_SIZE / 2));
+ priv->spi_rx_dma = (dma_addr_t) (priv->spi_tx_dma +
+ (PAGE_SIZE / 2));
+ } else {
+ /* Fall back to non-DMA */
+ enc424j600_enable_dma = 0;
+ }
+ }
+
+ /* Allocate non-DMA buffers */
+ if (!enc424j600_enable_dma) {
+ priv->spi_tx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_tx_buf) {
+ ret = -ENOMEM;
+ goto error_tx_buf;
+ }
+ priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_rx_buf) {
+ ret = -ENOMEM;
+ goto error_rx_buf;
+ }
+ }
+
+ if (!enc424j600_chipset_init(dev)) {
+ if (netif_msg_probe(priv))
+ dev_info(&spi->dev, DRV_NAME " chip not found\n");
+ ret = -EIO;
+ goto error_irq;
+ }
+
+ /* Board setup must set the relevant edge trigger type;
+ * level triggers won't currently work.
+ */
+ ret = request_irq(spi->irq, enc424j600_irq, 0, DRV_NAME, priv);
+ if (ret < 0) {
+ if (netif_msg_probe(priv))
+ dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
+ "(ret = %d)\n", spi->irq, ret);
+ goto error_irq;
+ }
+
+ dev->if_port = IF_PORT_10BASET;
+ dev->irq = spi->irq;
+ dev->netdev_ops = &enc424j600_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ SET_ETHTOOL_OPS(dev, &enc424j600_ethtool_ops);
+
+ enc424j600_lowpower(priv, true);
+
+ ret = register_netdev(dev);
+ if (ret) {
+ if (netif_msg_probe(priv))
+ dev_err(&spi->dev, "register netdev " DRV_NAME
+ " failed (ret = %d)\n", ret);
+ goto error_register;
+ }
+ dev_info(&dev->dev, DRV_NAME " driver registered\n");
+
+ return 0;
+
+error_register:
+ free_irq(spi->irq, priv);
+error_irq:
+ free_netdev(dev);
+ if (!enc424j600_enable_dma)
+ kfree(priv->spi_rx_buf);
+error_rx_buf:
+ if (!enc424j600_enable_dma)
+ kfree(priv->spi_tx_buf);
+error_tx_buf:
+ if (enc424j600_enable_dma) {
+ dma_free_coherent(&spi->dev, PAGE_SIZE,
+ priv->spi_tx_buf, priv->spi_tx_dma);
+ }
+error_alloc:
+ return ret;
+}
+
+static int __devexit enc424j600_remove(struct spi_device *spi)
+{
+ struct enc424j600_net *priv = dev_get_drvdata(&spi->dev);
+
+ if (netif_msg_drv(priv))
+ printk(KERN_DEBUG DRV_NAME ": remove\n");
+
+ unregister_netdev(priv->netdev);
+ free_irq(spi->irq, priv);
+ free_netdev(priv->netdev);
+
+ return 0;
+}
+
+static struct spi_driver enc424j600_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = enc424j600_probe,
+ .remove = __devexit_p(enc424j600_remove),
+};
+
+static int __init enc424j600_init(void)
+{
+ msec20_to_jiffies = msecs_to_jiffies(20);
+ /*autoneg works from 1600ms */
+ msec2000_to_jiffies = msecs_to_jiffies(2000);
+
+ return spi_register_driver(&enc424j600_driver);
+}
+
+module_init(enc424j600_init);
+
+static void __exit enc424j600_exit(void)
+{
+ spi_unregister_driver(&enc424j600_driver);
+}
+
+module_exit(enc424j600_exit);
+
+MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
+MODULE_AUTHOR("Balaji Venkatachalam <balaji.v@thotakaa.com>");
+MODULE_LICENSE("GPL");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");
+module_param(enc424j600_enable_dma, int, S_IRUGO);
+MODULE_PARM_DESC(enc424j600_enable_dma, "Enable SPI DMA. Default: 0 (Off)");
+MODULE_ALIAS("spi:" DRV_NAME);
diff -uprN -X a/Documentation/dontdiff a/drivers/net/enc424j600_hw.h
b/drivers/net/enc424j600_hw.h
--- a/drivers/net/enc424j600_hw.h 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/enc424j600_hw.h 2011-01-05 23:51:24.000000000 +0530
@@ -0,0 +1,460 @@
+/*
+* enc424j600_hw.h: Register definitions
+*
+*/
+
+#ifndef _ENC424J600_HW_H
+#define _ENC424J600_HW_H
+
+/*
+* ENC424J600 Control Registers
+* Control register definitions are a combination of address
+* and bank number
+* - Register address (bits 0-4)
+* - Bank number (bits 5-6)
+*/
+#define ADDR_MASK 0x1F
+#define BANK_MASK 0x60
+#define BANK_SHIFT 5
+
+/* All-bank registers */
+#define EUDASTL 0x16
+#define EUDASTH 0x17
+#define EUDANDL 0x18
+#define EUDANDH 0x19
+#define ESTATL 0x1A
+#define ESTATH 0x1B
+#define EIRL 0x1C
+#define EIRH 0x1D
+#define ECON1L 0x1E
+#define ECON1H 0x1F
+
+/* Bank 0 registers */
+#define ETXSTL (0x00 | 0x00)
+#define ETXSTH (0x01 | 0x00)
+#define ETXLENL (0x02 | 0x00)
+#define ETXLENH (0x03 | 0x00)
+#define ERXSTL (0x04 | 0x00)
+#define ERXSTH (0x05 | 0x00)
+#define ERXTAILL (0x06 | 0x00)
+#define ERXTAILH (0x07 | 0x00)
+#define ERXHEADL (0x08 | 0x00)
+#define ERXHEADH (0x09 | 0x00)
+#define EDMASTL (0x0A | 0x00)
+#define EDMASTH (0x0B | 0x00)
+#define EDMALENL (0x0C | 0x00)
+#define EDMALENH (0x0D | 0x00)
+#define EDMADSTL (0x0E | 0x00)
+#define EDMADSTH (0x0F | 0x00)
+#define EDMACSL (0x10 | 0x00)
+#define EDMACSH (0x11 | 0x00)
+#define ETXSTATL (0x12 | 0x00)
+#define ETXSTATH (0x13 | 0x00)
+#define ETXWIREL (0x14 | 0x00)
+#define ETXWIREH (0x15 | 0x00)
+
+/* Bank 1 registers */
+#define EHT1L (0x00 | 0x20)
+#define EHT1H (0x01 | 0x20)
+#define EHT2L (0x02 | 0x20)
+#define EHT2H (0x03 | 0x20)
+#define EHT3L (0x04 | 0x20)
+#define EHT3H (0x05 | 0x20)
+#define EHT4L (0x06 | 0x20)
+#define EHT4H (0x07 | 0x20)
+#define EPMM1L (0x08 | 0x20)
+#define EPMM1H (0x09 | 0x20)
+#define EPMM2L (0x0A | 0x20)
+#define EPMM2H (0x0B | 0x20)
+#define EPMM3L (0x0C | 0x20)
+#define EPMM3H (0x0D | 0x20)
+#define EPMM4L (0x0E | 0x20)
+#define EPMM4H (0x0F | 0x20)
+#define EPMCSL (0x10 | 0x20)
+#define EPMCSH (0x11 | 0x20)
+#define EPMOL (0x12 | 0x20)
+#define EPMOH (0x13 | 0x20)
+#define ERXFCONL (0x14 | 0x20)
+#define ERXFCONH (0x15 | 0x20)
+
+/* Bank 2 registers */
+#define MACON1L (0x00 | 0x40)
+#define MACON1H (0x01 | 0x40)
+#define MACON2L (0x02 | 0x40)
+#define MACON2H (0x03 | 0x40)
+#define MABBIPGL (0x04 | 0x40)
+#define MABBIPGH (0x05 | 0x40)
+#define MAIPGL (0x06 | 0x40)
+#define MAIPGH (0x07 | 0x40)
+#define MACLCONL (0x08 | 0x40)
+#define MACLCONH (0x09 | 0x40)
+#define MAMXFLL (0x0A | 0x40)
+#define MAMXFLH (0x0B | 0x40)
+#define MICMDL (0x12 | 0x40)
+#define MICMDH (0x13 | 0x40)
+#define MIREGADRL (0x14 | 0x40)
+#define MIREGADRH (0x15 | 0x40)
+
+/* Bank 3 registers */
+#define MAADR3L (0x00 | 0x60)
+#define MAADR3H (0x01 | 0x60)
+#define MAADR2L (0x02 | 0x60)
+#define MAADR2H (0x03 | 0x60)
+#define MAADR1L (0x04 | 0x60)
+#define MAADR1H (0x05 | 0x60)
+#define MIWRL (0x06 | 0x60)
+#define MIWRH (0x07 | 0x60)
+#define MIRDL (0x08 | 0x60)
+#define MIRDH (0x09 | 0x60)
+#define MISTATL (0x0A | 0x60)
+#define MISTATH (0x0B | 0x60)
+#define EPAUSL (0x0C | 0x60)
+#define EPAUSH (0x0D | 0x60)
+#define ECON2L (0x0E | 0x60)
+#define ECON2H (0x0F | 0x60)
+#define ERXWML (0x10 | 0x60)
+#define ERXWMH (0x11 | 0x60)
+#define EIEL (0x12 | 0x60)
+#define EIEH (0x13 | 0x60)
+#define EIDLEDL (0x14 | 0x60)
+#define EIDLEDH (0x15 | 0x60)
+
+/* Unbanked registers */
+#define EGPDATA (0x00 | 0x80)
+#define ERXDATA (0x02 | 0x80)
+#define EUDADATA (0x04 | 0x80)
+#define EGPRDPTL (0x06 | 0x80)
+#define EGPRDPTH (0x07 | 0x80)
+#define EGPWRPTL (0x08 | 0x80)
+#define EGPWRPTH (0x09 | 0x80)
+#define ERXRDPTL (0x0A | 0x80)
+#define ERXRDPTH (0x0B | 0x80)
+#define ERXWRPTL (0x0C | 0x80)
+#define ERXWRPTH (0x0D | 0x80)
+#define EUDARDPTL (0x0E | 0x80)
+#define EUDARDPTH (0x0F | 0x80)
+#define EUDAWRPTL (0x10 | 0x80)
+#define EUDAWRPTH (0x11 | 0x80)
+
+/* PHY registers */
+#define PHCON1 0x00
+#define PHSTAT1 0x01
+#define PHANA 0x04
+#define PHANLPA 0x05
+#define PHANE 0x06
+#define PHCON2 0x11
+#define PHSTAT2 0x1B
+#define PHSTAT3 0x1F
+
+/* Single-byte instructions */
+#define BXSEL(bank) (0xC0 + (bank & (BANK_MASK >> BANK_SHIFT)) * 2)
+/* Bank X Select */
+#define B0SEL 0xC0 /* Bank 0 Select */
+#define B1SEL 0xC2 /* Bank 1 Select */
+#define B2SEL 0xC4 /* Bank 2 Select */
+#define B3SEL 0xC6 /* Bank 3 Select */
+#define SETETHRST 0xCA /* System Reset */
+#define FCDISABLE 0xE0 /* Flow Control Disable */
+#define FCSINGLE 0xE2 /* Flow Control Single */
+#define FCMULTIPLE 0xE4 /* Flow Control Multiple */
+#define FCCLEAR 0xE6 /* Flow Control Clear */
+#define SETPKTDEC 0xCC /* Decrement Packet Counter */
+#define DMASTOP 0xD2 /* DMA Stop */
+#define DMACKSUM 0xD8 /* DMA Start Checksum */
+#define DMACKSUMS 0xDA /* DMA Start Checksum with Seed */
+#define DMACOPY 0xDC /* DMA Start Copy */
+#define DMACOPYS 0xDE /* DMA Start Copy and Checksum with Seed */
+#define SETTXRTS 0xD4 /* Request Packet Transmission */
+#define ENABLERX 0xE8 /* Enable RX */
+#define DISABLERX 0xEA /* Disable RX */
+#define SETEIE 0xEC /* Enable Interrupts */
+#define CLREIE 0xEE /* Disable Interrupts */
+
+/* Two byte instructions */
+#define RBSEL 0xC8 /* Read Bank Select */
+
+/* Three byte instructions */
+#define WGPRDPT 0x60 /* Write EGPRDPT */
+#define RGPRDPT 0x62 /* Read EGPRDPT */
+#define WRXRDPT 0x64 /* Write ERXRDPT */
+#define RRXRDPT 0x66 /* Read ERXRDPT */
+#define WUDARDPT 0x68 /* Write EUDARDPT */
+#define RUDARDPT 0x6A /* Read EUDARDPT */
+#define WGPWRPT 0x6C /* Write EGPWRPT */
+#define RGPWRPT 0x6E /* Read EGPWRPT */
+#define WRXWRPT 0x70 /* Write ERXWRPT */
+#define RRXWRPT 0x72 /* Read ERXWRPT */
+#define WUDAWRPT 0x74 /* Write EUDAWRPT */
+#define RUDAWRPT 0x76 /* Read EUDAWRPT */
+
+/* n byte instructions */
+#define RCR(addr) (0x00 | (addr & ADDR_MASK)) /* Read Control Register */
+#define WCR(addr) (0x40 | (addr & ADDR_MASK)) /* Write Control Register */
+#define RCRU 0x20 /* Read Control Register Unbanked */
+#define WCRU 0x22 /* Write Control Register Unbanked */
+#define BFS(addr) (0x80 | (addr & ADDR_MASK)) /* Bit Field Set */
+#define BFC(addr) (0xA0 | (addr & ADDR_MASK)) /* Bit Field Clear */
+#define BFSU 0x24 /* Bit Field Set Unbanked */
+#define BFCU 0x26 /* Bit Field Clear Unbanked */
+#define RGPDATA 0x28 /* Read EGPDATA */
+#define WGPDATA 0x2A /* Write EGPDATA */
+#define RRXDATA 0x2C /* Read ERXDATA */
+#define WRXDATA 0x2E /* Write ERXDATA */
+#define RUDADATA 0x30 /* Read EUDADATA */
+#define WUDADATA 0x32 /* Write EUDADATA */
+
+/* Register bit definitions */
+/* ESTATH */
+#define INT (1 << 7)
+#define FCIDLE (1 << 6)
+#define RXBUSY (1 << 5)
+#define CLKRDY (1 << 4)
+#define PHYDPX (1 << 2)
+#define PHYLNK (1 << 0)
+
+/* EIRH */
+/*for ease of use lets access it as a word*/
+#define CRYPTEN (1 << 15)
+#define MODEXIF (1 << 14)
+#define HASHIF (1 << 13)
+#define AESIF (1 << 12)
+#define LINKIF (1 << 11)
+
+/* EIRL */
+#define PKTIF (1 << 6)
+#define DMAIF (1 << 5)
+#define TXIF (1 << 3)
+#define TXABTIF (1 << 2)
+#define RXABTIF (1 << 1)
+#define PCFULIF (1 << 0)
+
+/* ECON1H */
+#define MODEXST (1 << 7)
+#define HASHEN (1 << 6)
+#define HASHOP (1 << 5)
+#define HASHLST (1 << 4)
+#define AESST (1 << 3)
+#define AESOP1 (1 << 2)
+#define AESOP0 (1 << 1)
+#define PKTDEC (1 << 0)
+
+/* ECON1L */
+#define FCOP1 (1 << 7)
+#define FCOP0 (1 << 6)
+#define DMAST (1 << 5)
+#define DMACPY (1 << 4)
+#define DMACSSD (1 << 3)
+#define DMANOCS (1 << 2)
+#define TXRTS (1 << 1)
+#define RXEN (1 << 0)
+
+/* ETXSTATH */
+#define LATECOL (1 << 2)
+#define MAXCOL (1 << 1)
+#define EXDEFER (1 << 0)
+
+/* ETXSTATL */
+#define ETXSTATL_DEFER (1 << 7)
+#define CRCBAD (1 << 4)
+#define COLCNT_MASK 0xF
+
+/* ERXFCONH */
+#define HTEN (1 << 7)
+#define MPEN (1 << 6)
+#define NOTPM (1 << 4)
+#define PMEN3 (1 << 3)
+#define PMEN2 (1 << 2)
+#define PMEN1 (1 << 1)
+#define PMEN0 (1 << 0)
+
+/* ERXFCONL */
+#define CRCEEN (1 << 7)
+#define CRCEN (1 << 6)
+#define RUNTEEN (1 << 5)
+#define RUNTEN (1 << 4)
+#define UCEN (1 << 3)
+#define NOTMEEN (1 << 2)
+#define MCEN (1 << 1)
+#define BCEN (1 << 0)
+/*no bytewise access*/
+/* MACON1L */
+#define LOOPBK (1 << 4)
+#define RXPAUS (1 << 2)
+#define PASSALL (1 << 1)
+
+/* MACON2 */
+#define MACON2_DEFER (1 << 14)
+#define BPEN (1 << 13)
+#define NOBKOFF (1 << 12)
+#define PADCFG2 (1 << 7)
+#define PADCFG1 (1 << 6)
+#define PADCFG0 (1 << 5)
+#define TXCRCEN (1 << 4)
+#define PHDREN (1 << 3)
+#define HFRMEN (1 << 2)
+#define FULDPX (1 << 0)
+
+/* MAIPG */
+/* value of the high byte is given by the reserved bits,
+* value of the low byte is recomended setting of the
+* IPG parameter.
+*/
+#define MAIPGH_VAL 0x0C
+#define MAIPGL_VAL 0x12
+
+/* MIREGADRH */
+#define MIREGADRH_VAL 0x01
+
+/* MIREGADRL */
+#define PHREG_MASK 0x1F
+
+/* MICMDL */
+#define MIISCAN (1 << 1)
+#define MIIRD (1 << 0)
+
+/* MISTATL */
+#define NVALID (1 << 2)
+#define SCAN (1 << 1)
+#define BUSY (1 << 0)
+
+/* ECON2H */
+#define ETHEN (1 << 7)
+#define STRCH (1 << 6)
+#define TXMAC (1 << 5)
+#define SHA1MD5 (1 << 4)
+#define COCON3 (1 << 3)
+#define COCON2 (1 << 2)
+#define COCON1 (1 << 1)
+#define COCON0 (1 << 0)
+
+/* ECON2L */
+#define AUTOFC (1 << 7)
+#define TXRST (1 << 6)
+#define RXRST (1 << 5)
+#define ETHRST (1 << 4)
+#define MODLEN1 (1 << 3)
+#define MODLEN0 (1 << 2)
+#define AESLEN1 (1 << 1)
+#define AESLEN0 (1 << 0)
+
+/* EIEH */
+#define INTIE (1 << 7)
+#define MODEXIE (1 << 6)
+#define HASHIE (1 << 5)
+#define AESIE (1 << 4)
+#define LINKIE (1 << 3)
+
+/* EIEL */
+#define PKTIE (1 << 6)
+#define DMAIE (1 << 5)
+#define TXIE (1 << 3)
+#define TXABTIE (1 << 2)
+#define RXABTIE (1 << 1)
+#define PCFULIE (1 << 0)
+
+/* EIDLEDH */
+#define LACFG3 (1 << 7)
+#define LACFG2 (1 << 6)
+#define LACFG1 (1 << 5)
+#define LACFG0 (1 << 4)
+#define LBCFG3 (1 << 3)
+#define LBCFG2 (1 << 2)
+#define LBCFG1 (1 << 1)
+#define LBCFG0 (1 << 0)
+
+/* EIDLEDL */
+#define DEVID_SHIFT 5
+#define DEVID_MASK (0x7 << DEVID_SHIFT)
+#define REVID_SHIFT 0
+#define REVID_MASK (0x1F << REVID_SHIFT)
+
+/* PHANA */
+/* Default value for PHY initialization*/
+#define PHANA_DEFAULT 0x05E1
+
+/* PHCON1 */
+#define PRST (1 << 15)
+#define PLOOPBK (1 << 14)
+#define SPD100 (1 << 13)
+#define ANEN (1 << 12)
+#define PSLEEP (1 << 11)
+#define RENEG (1 << 9)
+#define PFULDPX (1 << 8)
+
+/* PHSTAT */
+#define FULL100 (1 << 14)
+#define HALF100 (1 << 13)
+#define FULL10 (1 << 12)
+#define HALF10 (1 << 11)
+#define ANDONE (1 << 5)
+#define LRFAULT (1 << 4)
+#define ANABLE (1 << 3)
+#define LLSTAT (1 << 2)
+#define EXTREGS (1 << 0)
+
+#define EUDAST_TEST_VAL 0x1234
+
+#define TSV_SIZE 7
+
+#define ENC424J600_DEV_ID 0x1
+
+/* Configuration */
+
+/* Led is on when the link is present and driven low
+* temporarily when packet is TX'd or RX'd */
+#define LED_A_SETTINGS 0xC
+
+/* Led is on if the link is in 100 Mbps mode */
+#define LED_B_SETTINGS 0x8
+
+/* maximum ethernet frame length
+* Currently not used as a limit anywhere
+* (we're using the "huge frame enable" feature of
+* enc424j600). */
+#define MAX_FRAMELEN 1518
+
+/* Size in bytes of the receive buffer in enc424j600.
+* Must be word aligned (even).
+*/
+#define RX_BUFFER_SIZE (15 * MAX_FRAMELEN)
+
+/* Start of the general purpose area in sram */
+#define SRAM_GP_START 0x0
+
+/* SRAM size */
+#define SRAM_SIZE 0x6000
+
+/* Start of the receive buffer */
+#define ERXST_VAL (SRAM_SIZE - RX_BUFFER_SIZE)
+
+#define RSV_RXLONGEVDROPEV 16
+#define RSV_CARRIEREV 18
+#define RSV_CRCERROR 20
+#define RSV_LENCHECKERR 21
+#define RSV_LENOUTOFRANGE 22
+#define RSV_RXOK 23
+#define RSV_RXMULTICAST 24
+#define RSV_RXBROADCAST 25
+#define RSV_DRIBBLENIBBLE 26
+#define RSV_RXCONTROLFRAME 27
+#define RSV_RXPAUSEFRAME 28
+#define RSV_RXUNKNOWNOPCODE 29
+#define RSV_RXTYPEVLAN 30
+
+#define RSV_RUNTFILTERMATCH 31
+#define RSV_NOTMEFILTERMATCH 32
+#define RSV_HASHFILTERMATCH 33
+#define RSV_MAGICPKTFILTERMATCH 34
+#define RSV_PTRNMTCHFILTERMATCH 35
+#define RSV_UNICASTFILTERMATCH 36
+
+#define RSV_SIZE 8
+#define RSV_BITMASK(x) (1 << ((x) - 16))
+#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0)
+
+/* Put RX buffer at 0 as suggested by the Errata datasheet */
+
+#define RXSTART_INIT ERXST_VAL
+#define RXEND_INIT 0x5FFF
+
+#endif
diff -uprN -X a/Documentation/dontdiff a/drivers/net/Kconfig
b/drivers/net/Kconfig
--- a/drivers/net/Kconfig 2010-07-05 22:41:43.000000000 +0530
+++ b/drivers/net/Kconfig 2011-01-16 15:26:16.000000000 +0530
@@ -973,6 +973,16 @@ config ENC28J60_WRITEVERIFY
Enable the verify after the buffer write useful for debugging purpose.
If unsure, say N.
+config ENC424J600
+ tristate "ENC424J600 support"
+ depends on EXPERIMENTAL && SPI && NET_ETHERNET
+ select CRC32
+ ---help---
+ Support for the Microchip EN424J600 ethernet chip.
+
+ To compile this driver as a module, choose M here. The module will be
+ called enc424j600.
+
config ETHOC
tristate "OpenCores 10/100 Mbps Ethernet MAC support"
depends on NET_ETHERNET && HAS_IOMEM
diff -uprN -X a/Documentation/dontdiff a/drivers/net/Makefile
b/drivers/net/Makefile
--- a/drivers/net/Makefile 2010-07-05 22:41:43.000000000 +0530
+++ b/drivers/net/Makefile 2011-01-05 21:46:57.000000000 +0530
@@ -240,6 +240,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_d
pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
+obj-$(CONFIG_ENC424J600) += enc424j600.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2011-02-23 6:00 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-01-06 6:43 [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus Balaji Venkatachalam
2011-01-06 14:56 ` Michał Mirosław
2011-01-09 9:00 ` Balaji Venkatachalam
2011-01-16 10:51 ` Balaji Venkatachalam
2011-01-24 23:04 ` David Miller
2011-01-29 8:24 ` Balaji Venkatachalam
2011-01-30 10:14 ` Balaji Venkatachalam
2011-01-30 11:55 ` Francois Romieu
2011-01-30 12:01 ` David Miller
[not found] ` <AANLkTimC3bsvT24cz4A+iJfjgL3LxBWxKzb182ocqbiL@mail.gmail.com>
2011-01-30 12:34 ` Balaji Venkatachalam
2011-02-08 14:48 ` Balaji Venkatachalam
2011-02-23 6:00 ` Balaji Venkatachalam
2011-01-29 8:03 Balaji Venkatachalam
2011-01-29 11:58 ` Francois Romieu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.