From: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
To: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Artem Bityutskiy
<artem.bityutskiy-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH] mtd/m25p80: add device tree probe support
Date: Tue, 26 Jun 2012 13:47:01 +0200 [thread overview]
Message-ID: <201206261347.01995.marex@denx.de> (raw)
In-Reply-To: <20120626081546.GB4928-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
Dear Shawn Guo,
> On Mon, Jun 25, 2012 at 06:50:10PM +0200, Marek Vasut wrote:
> > 116 ssp2: ssp@80014000 {
> > 117 #address-cells = <1>;
> > 118 #size-cells = <0>;
> > 119 compatible = "fsl,imx28-spi";
> > 120 pinctrl-names = "default";
> > 121 pinctrl-0 = <&spi2_pins_a>;
> > 122 status = "okay";
> > 123
> > 124 flash: m25p80@0 {
> > 125 #address-cells = <1>;
> > 126 #size-cells = <1>;
> > 127 compatible = "m25p80";
> > 128 spi-max-frequency =
> > <25000000>; 129 reg = <0>;
> > 130 };
> > 131 };
> >
> > I use this + my SPI patches I submitted recently.
>
> I do not have the flash on my imx28-evk board, but I just tested on
> imx6q-sabrelite, and yes, it can be probed without the patch. I'm
> fine then.
Good, let's discard this patch and close this issue :-)
Best regards,
Marek Vasut
WARNING: multiple messages have this Message-ID (diff)
From: Marek Vasut <marex@denx.de>
To: Shawn Guo <shawn.guo@linaro.org>
Cc: manu <manuel.pezzin@free.fr>,
patches@linaro.org, devicetree-discuss@lists.ozlabs.org,
Grant Likely <grant.likely@secretlab.ca>,
linux-mtd@lists.infradead.org,
Artem Bityutskiy <artem.bityutskiy@intel.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] mtd/m25p80: add device tree probe support
Date: Tue, 26 Jun 2012 13:47:01 +0200 [thread overview]
Message-ID: <201206261347.01995.marex@denx.de> (raw)
In-Reply-To: <20120626081546.GB4928@S2101-09.ap.freescale.net>
Dear Shawn Guo,
> On Mon, Jun 25, 2012 at 06:50:10PM +0200, Marek Vasut wrote:
> > 116 ssp2: ssp@80014000 {
> > 117 #address-cells = <1>;
> > 118 #size-cells = <0>;
> > 119 compatible = "fsl,imx28-spi";
> > 120 pinctrl-names = "default";
> > 121 pinctrl-0 = <&spi2_pins_a>;
> > 122 status = "okay";
> > 123
> > 124 flash: m25p80@0 {
> > 125 #address-cells = <1>;
> > 126 #size-cells = <1>;
> > 127 compatible = "m25p80";
> > 128 spi-max-frequency =
> > <25000000>; 129 reg = <0>;
> > 130 };
> > 131 };
> >
> > I use this + my SPI patches I submitted recently.
>
> I do not have the flash on my imx28-evk board, but I just tested on
> imx6q-sabrelite, and yes, it can be probed without the patch. I'm
> fine then.
Good, let's discard this patch and close this issue :-)
Best regards,
Marek Vasut
WARNING: multiple messages have this Message-ID (diff)
From: marex@denx.de (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mtd/m25p80: add device tree probe support
Date: Tue, 26 Jun 2012 13:47:01 +0200 [thread overview]
Message-ID: <201206261347.01995.marex@denx.de> (raw)
In-Reply-To: <20120626081546.GB4928@S2101-09.ap.freescale.net>
Dear Shawn Guo,
> On Mon, Jun 25, 2012 at 06:50:10PM +0200, Marek Vasut wrote:
> > 116 ssp2: ssp at 80014000 {
> > 117 #address-cells = <1>;
> > 118 #size-cells = <0>;
> > 119 compatible = "fsl,imx28-spi";
> > 120 pinctrl-names = "default";
> > 121 pinctrl-0 = <&spi2_pins_a>;
> > 122 status = "okay";
> > 123
> > 124 flash: m25p80 at 0 {
> > 125 #address-cells = <1>;
> > 126 #size-cells = <1>;
> > 127 compatible = "m25p80";
> > 128 spi-max-frequency =
> > <25000000>; 129 reg = <0>;
> > 130 };
> > 131 };
> >
> > I use this + my SPI patches I submitted recently.
>
> I do not have the flash on my imx28-evk board, but I just tested on
> imx6q-sabrelite, and yes, it can be probed without the patch. I'm
> fine then.
Good, let's discard this patch and close this issue :-)
Best regards,
Marek Vasut
next prev parent reply other threads:[~2012-06-26 11:47 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-25 13:37 [PATCH] mtd/m25p80: add device tree probe support Shawn Guo
2011-07-25 13:37 ` Shawn Guo
2011-07-25 13:37 ` Shawn Guo
[not found] ` <1311601063-16581-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-07-25 21:19 ` Grant Likely
2011-07-25 21:19 ` Grant Likely
2011-07-25 21:19 ` Grant Likely
2011-07-28 19:22 ` manu
2011-07-28 19:22 ` manu
2011-07-28 19:22 ` manu
[not found] ` <4E31B713.1030901-GANU6spQydw@public.gmane.org>
2011-07-28 21:45 ` Grant Likely
2011-07-28 21:45 ` Grant Likely
2011-07-28 21:45 ` Grant Likely
[not found] ` <20110728214521.GA4674-e0URQFbLeQY2iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2012-06-23 2:15 ` Marek Vasut
2012-06-23 2:15 ` Marek Vasut
2012-06-23 2:15 ` Marek Vasut
[not found] ` <201206230415.18833.marex-ynQEQJNshbs@public.gmane.org>
2012-06-25 15:40 ` Shawn Guo
2012-06-25 15:40 ` Shawn Guo
2012-06-25 15:40 ` Shawn Guo
[not found] ` <20120625154006.GB2342-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2012-06-25 16:01 ` Marek Vasut
2012-06-25 16:01 ` Marek Vasut
2012-06-25 16:01 ` Marek Vasut
2012-06-25 16:15 ` Shawn Guo
2012-06-25 16:15 ` Shawn Guo
[not found] ` <20120625161506.GH2342-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2012-06-25 16:50 ` Marek Vasut
2012-06-25 16:50 ` Marek Vasut
2012-06-25 16:50 ` Marek Vasut
[not found] ` <201206251850.10839.marex-ynQEQJNshbs@public.gmane.org>
2012-06-26 8:15 ` Shawn Guo
2012-06-26 8:15 ` Shawn Guo
2012-06-26 8:15 ` Shawn Guo
[not found] ` <20120626081546.GB4928-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2012-06-26 11:47 ` Marek Vasut [this message]
2012-06-26 11:47 ` Marek Vasut
2012-06-26 11:47 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201206261347.01995.marex@denx.de \
--to=marex-ynqeqjnshbs@public.gmane.org \
--cc=artem.bityutskiy-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.