Re: [PATCH v2 05/12] usb: phy: add the Berlin USB PHY driver

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 9164 bytes --]

On Tue, Jun 24, 2014 at 12:35:14PM +0200, Antoine Ténart wrote:
> Add the driver driving the Marvell Berlin USB PHY. This allows to
> initialize the PHY and to use it from the USB driver later.
> 
> Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>

since this is a brand new driver, it should go to drivers/phy instead.

> ---
>  drivers/usb/phy/Kconfig          |   9 ++
>  drivers/usb/phy/Makefile         |   1 +
>  drivers/usb/phy/phy-berlin-usb.c | 211 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 221 insertions(+)
>  create mode 100644 drivers/usb/phy/phy-berlin-usb.c
> 
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index e253fa05be68..9a47cc1c73fe 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -18,6 +18,15 @@ config AB8500_USB
>  	  This transceiver supports high and full speed devices plus,
>  	  in host mode, low speed.
>  
> +config BERLIN_USBPHY
> +	tristate "Marvell Berlin USB Transceiver Driver"
> +	depends on ARCH_BERLIN
> +	select USB_PHY
> +	help
> +	  Enable this to support the USB tranceiver on Marvell Berlin
> +	  SoCs.
> +
> +
>  config FSL_USB2_OTG
>  	bool "Freescale USB OTG Transceiver Driver"
>  	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM_RUNTIME
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index 24a91332d4ad..450ac91c5e20 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_OF)			+= of.o
>  # transceiver drivers, keep the list sorted
>  
>  obj-$(CONFIG_AB8500_USB)		+= phy-ab8500-usb.o
> +obj-$(CONFIG_BERLIN_USBPHY)		+= phy-berlin-usb.o
>  obj-$(CONFIG_FSL_USB2_OTG)		+= phy-fsl-usb.o
>  obj-$(CONFIG_ISP1301_OMAP)		+= phy-isp1301-omap.o
>  obj-$(CONFIG_NOP_USB_XCEIV)		+= phy-generic.o
> diff --git a/drivers/usb/phy/phy-berlin-usb.c b/drivers/usb/phy/phy-berlin-usb.c
> new file mode 100644
> index 000000000000..276d28f5cb83
> --- /dev/null
> +++ b/drivers/usb/phy/phy-berlin-usb.c
> @@ -0,0 +1,211 @@
> +/*
> + * Copyright (C) 2014 Marvell Technology Group Ltd.
> + *
> + * Antoine Ténart <antoine.tenart@free-electrons.com>
> + * Jisheng Zhang <jszhang@marvell.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/usb/phy.h>
> +
> +#define USB_PHY_PLL		0x04
> +#define USB_PHY_PLL_CONTROL	0x08
> +#define USB_PHY_TX_CTRL0	0x10
> +#define USB_PHY_TX_CTRL1	0x14
> +#define USB_PHY_TX_CTRL2	0x18
> +#define USB_PHY_RX_CTRL		0x20
> +#define USB_PHY_ANALOG		0x34
> +
> +/* USB_PHY_PLL */
> +#define CLK_REF_DIV(x)		((x) << 4)
> +#define FEEDBACK_CLK_DIV(x)	((x) << 8)
> +
> +/* USB_PHY_PLL_CONTROL */
> +#define CLK_STABLE		BIT(0)
> +#define PLL_CTRL_PIN		BIT(1)
> +#define PLL_CTRL_REG		BIT(2)
> +#define PLL_ON			BIT(3)
> +#define PHASE_OFF_TOL_125	(0x0 << 5)
> +#define PHASE_OFF_TOL_250	BIT(5)
> +#define KVC0_CALIB		(0x0 << 9)
> +#define KVC0_REG_CTRL		BIT(9)
> +#define KVC0_HIGH		(0x0 << 10)
> +#define KVC0_LOW		(0x3 << 10)
> +#define CLK_BLK_EN		BIT(13)
> +
> +/* USB_PHY_TX_CTRL0 */
> +#define EXT_HS_RCAL_EN		BIT(3)
> +#define EXT_FS_RCAL_EN		BIT(4)
> +#define IMPCAL_VTH_DIV(x)	((x) << 5)
> +#define EXT_RS_RCAL_DIV(x)	((x) << 8)
> +#define EXT_FS_RCAL_DIV(x)	((x) << 12)
> +
> +/* USB_PHY_TX_CTRL1 */
> +#define TX_VDD15_14		(0x0 << 4)
> +#define TX_VDD15_15		BIT(4)
> +#define TX_VDD15_16		(0x2 << 4)
> +#define TX_VDD15_17		(0x3 << 4)
> +#define TX_VDD12_VDD		(0x0 << 6)
> +#define TX_VDD12_11		BIT(6)
> +#define TX_VDD12_12		(0x2 << 6)
> +#define TX_VDD12_13		(0x3 << 6)
> +#define LOW_VDD_EN		BIT(8)
> +#define TX_OUT_AMP(x)		((x) << 9)
> +
> +/* USB_PHY_TX_CTRL2 */
> +#define TX_CHAN_CTRL_REG(x)	((x) << 0)
> +#define DRV_SLEWRATE(x)		((x) << 4)
> +#define IMP_CAL_FS_HS_DLY_0	(0x0 << 6)
> +#define IMP_CAL_FS_HS_DLY_1	BIT(6)
> +#define IMP_CAL_FS_HS_DLY_2	(0x2 << 6)
> +#define IMP_CAL_FS_HS_DLY_3	(0x3 << 6)
> +#define FS_DRV_EN_MASK(x)	((x) << 8)
> +#define HS_DRV_EN_MASK(x)	((x) << 12)
> +
> +/* USB_PHY_RX_CTRL */
> +#define PHASE_FREEZE_DLY_2_CL	(0x0 << 0)
> +#define PHASE_FREEZE_DLY_4_CL	BIT(0)
> +#define ACK_LENGTH_8_CL		(0x0 << 2)
> +#define ACK_LENGTH_12_CL	BIT(2)
> +#define ACK_LENGTH_16_CL	(0x2 << 2)
> +#define ACK_LENGTH_20_CL	(0x3 << 2)
> +#define SQ_LENGTH_3		(0x0 << 4)
> +#define SQ_LENGTH_6		BIT(4)
> +#define SQ_LENGTH_9		(0x2 << 4)
> +#define SQ_LENGTH_12		(0x3 << 4)
> +#define DISCON_THRESHOLD_260	(0x0 << 6)
> +#define DISCON_THRESHOLD_270	BIT(6)
> +#define DISCON_THRESHOLD_280	(0x2 << 6)
> +#define DISCON_THRESHOLD_290	(0x3 << 6)
> +#define SQ_THRESHOLD(x)		((x) << 8)
> +#define LPF_COEF(x)		((x) << 12)
> +#define INTPL_CUR_10		(0x0 << 14)
> +#define INTPL_CUR_20		BIT(14)
> +#define INTPL_CUR_30		(0x2 << 14)
> +#define INTPL_CUR_40		(0x3 << 14)
> +
> +/* USB_PHY_ANALOG */
> +#define ANA_PWR_UP		BIT(1)
> +#define ANA_PWR_DOWN		BIT(2)
> +#define V2I_VCO_RATIO(x)	((x) << 7)
> +#define R_ROTATE_90		(0x0 << 10)
> +#define R_ROTATE_0		BIT(10)
> +#define MODE_TEST_EN		BIT(11)
> +#define ANA_TEST_DC_CTRL(x)	((x) << 12)
> +
> +#define to_berlin_phy_priv(p)	container_of((p), struct berlin_phy_priv, phy)
> +
> +static const u32 phy_berlin_pll_dividers[] = {
> +	/* Berlin 2 */
> +	CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
> +	/* Berlin 2CD */
> +	CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55),
> +};
> +
> +struct berlin_phy_priv {
> +	void __iomem		*base;
> +	struct usb_phy		phy;
> +	struct reset_control	*rst_ctrl;
> +	u32			pll_divider;
> +};
> +
> +static int berlin_phy_init(struct usb_phy *phy)
> +{
> +	struct berlin_phy_priv *priv = to_berlin_phy_priv(phy);
> +
> +	reset_control_reset(priv->rst_ctrl);
> +
> +	writel(priv->pll_divider,
> +	       priv->base + USB_PHY_PLL);
> +	writel(CLK_STABLE | PLL_CTRL_REG | PHASE_OFF_TOL_250 | KVC0_REG_CTRL |
> +	       CLK_BLK_EN, priv->base + USB_PHY_PLL_CONTROL);
> +	writel(V2I_VCO_RATIO(0x5) | R_ROTATE_0 | ANA_TEST_DC_CTRL(0x5),
> +	       priv->base + USB_PHY_ANALOG);
> +	writel(PHASE_FREEZE_DLY_4_CL | ACK_LENGTH_16_CL | SQ_LENGTH_12 |
> +	       DISCON_THRESHOLD_260 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) |
> +	       INTPL_CUR_30, priv->base + USB_PHY_RX_CTRL);
> +
> +	writel(TX_VDD12_13 | TX_OUT_AMP(0x3), priv->base + USB_PHY_TX_CTRL1);
> +	writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
> +	       priv->base + USB_PHY_TX_CTRL0);
> +
> +	writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4) |
> +	       EXT_FS_RCAL_DIV(0x2), priv->base + USB_PHY_TX_CTRL0);
> +
> +	writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
> +	       priv->base + USB_PHY_TX_CTRL0);
> +	writel(TX_CHAN_CTRL_REG(0xf) | DRV_SLEWRATE(0x3) | IMP_CAL_FS_HS_DLY_3 |
> +	       FS_DRV_EN_MASK(0xd), priv->base + USB_PHY_TX_CTRL2);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id phy_berlin_sata_of_match[] = {
> +	{
> +		.compatible = "marvell,berlin2-usb-phy",
> +		.data = &phy_berlin_pll_dividers[0],
> +	},
> +	{
> +		.compatible = "marvell,berlin2cd-usb-phy",
> +		.data = &phy_berlin_pll_dividers[1],
> +	},
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match);
> +
> +static int berlin_phy_probe(struct platform_device *pdev)
> +{
> +	const struct of_device_id *match =
> +		of_match_device(phy_berlin_sata_of_match, &pdev->dev);
> +	struct berlin_phy_priv *priv;
> +	struct resource *res;
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(priv->base))
> +		return PTR_ERR(priv->base);
> +
> +	priv->rst_ctrl = devm_reset_control_get(&pdev->dev, NULL);
> +	if (IS_ERR(priv->rst_ctrl))
> +		return PTR_ERR(priv->rst_ctrl);
> +
> +	priv->pll_divider = *((u32 *)match->data);
> +
> +	priv->phy.io_priv = priv->base;
> +	priv->phy.dev = &pdev->dev;
> +	priv->phy.label = "phy-berlin-usb";
> +	priv->phy.init = berlin_phy_init;
> +	priv->phy.type = USB_PHY_TYPE_USB2;
> +
> +	platform_set_drvdata(pdev, priv);
> +
> +	return usb_add_phy_dev(&priv->phy);
> +}
> +
> +static struct platform_driver phy_berlin_usb_driver = {
> +	.probe	= berlin_phy_probe,
> +	.driver	= {
> +		.name		= "phy-berlin-usb",
> +		.owner		= THIS_MODULE,
> +		.of_match_table	= phy_berlin_sata_of_match,
> +	 },
> +};
> +module_platform_driver(phy_berlin_usb_driver);
> +
> +MODULE_AUTHOR("Antoine Ténart <antoine.tenart@free-electrons.com>");
> +MODULE_DESCRIPTION("Marvell Berlin USB PHY driver");
> +MODULE_LICENSE("GPL");
> -- 
> 1.9.1
> 

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]