* [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4
@ 2016-12-19 9:05 Holger Schranz
2016-12-19 17:30 ` John Snow
0 siblings, 1 reply; 12+ messages in thread
From: Holger Schranz @ 2016-12-19 9:05 UTC (permalink / raw)
To: qemu-devel; +Cc: mueller-ralf
# Strange/wrong behavior in QEMU 2.8.0-rc4
After update from QEMU 2.6.2 to 2.8.0-rc4 the tape devices
and the corresponding medium changer are no longer available
in the VM quest system.
The tape devices and the media changer are declared in the
xml-file for libvirt. Both, tape drives and medium changer
are avalilable via iSCSI.
In a first rough investigation the login in iSCSI runs well
but in QEMU, it seems the devices doesn't reported to the VM-Quest.
------------------
Best regards
Holger
=====================================================================
XML-Declration:
.
.
.
<!-- SCSI 2 -->
<controller type='scsi' model='virtio-scsi' index='1'>
<alias name='scsi1'/>
</controller>
<!-- 2 x LTO5 -->
<hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
<source protocol='iscsi'
name='iqn.2008-09.net.fsc:server.LT260_61003/4'>
<host name='etcsvms2.abg.fsc.net' port='3260'/>
</source>
<address type='drive' controller='1' bus='0' target='2' unit='1'/>
</hostdev>
<hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
<source protocol='iscsi'
name='iqn.2008-09.net.fsc:server.LT260_61003/5'>
<host name='etcsvms2.abg.fsc.net' port='3260'/>
</source>
<address type='drive' controller='1' bus='0' target='2' unit='2'/>
</hostdev>
<!-- Virtual media changer Fujitsu LT260 -->
<hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
<source protocol='iscsi'
name='iqn.2008-09.net.fsc:server.LT260_61003/6'>
<host name='etcsvms2.abg.fsc.net' port='3260'/>
</source>
<address type='drive' controller='1' bus='0' target='2' unit='3'/>
</hostdev>
<!-- 2 x LTO6 (via PLP(LAN-attached library)) -->
<hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
<source protocol='iscsi'
name='iqn.2008-09.net.fsc:server.LT60_61005/3'>
<host name='etcsvms2.abg.fsc.net' port='3260'/>
</source>
<address type='drive' controller='1' bus='0' target='2' unit='4'/>
</hostdev>
<hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
<source protocol='iscsi'
name='iqn.2008-09.net.fsc:server.LT60_61005/4'>
<host name='etcsvms2.abg.fsc.net' port='3260'/>
</source>
<address type='drive' controller='1' bus='0' target='2' unit='5'/>
</hostdev>
.
.
.
===============================================================================
correct behavior/Result inside the VM-Quest together with QEMU/KVM 2.6.2
/ 2.7.0
--
(VCSTCS82:A)IUP1:~ # lsscsi -g
[0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda /dev/sg0
[3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 /dev/sg1
[8:0:2:1] tape HP Ultrium 5-SCSI 0001 /dev/st3 /dev/sg6
[8:0:2:2] tape HP Ultrium 5-SCSI 0001 /dev/st2 /dev/sg5
[8:0:2:3] mediumx FUJITSU ETERNUS LT260 6.20 - /dev/sg4
[8:0:2:4] tape HP Ultrium 6-SCSI 23AB /dev/st1 /dev/sg3
[8:0:2:5] tape HP Ultrium 6-SCSI 23AB /dev/st0 /dev/sg2
[11:0:0:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdb /dev/sg7
[11:0:0:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdh /dev/sg13
[11:0:0:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdg /dev/sg12
[11:0:0:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdf /dev/sg11
[11:0:0:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sde /dev/sg10
[11:0:0:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdd /dev/sg9
[11:0:0:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdc /dev/sg8
[11:0:0:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdi /dev/sg14
(VCSTCS82:A)IUP1:~ #
Wrong behavior/Result inside the VM-Quest together with QEMU/KVM 2.8.0-RC4
--
(VCSTCS82:A)IUP1:~ # lsscsi -g
[0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda /dev/sg0
[3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 /dev/sg1
[11:0:1:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdj /dev/sg10
[11:0:1:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdp /dev/sg16
[11:0:1:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdo /dev/sg15
[11:0:1:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdn /dev/sg14
[11:0:1:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sdm /dev/sg13
[11:0:1:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdl /dev/sg12
[11:0:1:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdk /dev/sg11
[11:0:1:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdq /dev/sg17
(VCSTCS82:A)IUP1:~ #
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4
2016-12-19 9:05 [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4 Holger Schranz
@ 2016-12-19 17:30 ` John Snow
2016-12-20 16:53 ` Holger Schranz
0 siblings, 1 reply; 12+ messages in thread
From: John Snow @ 2016-12-19 17:30 UTC (permalink / raw)
To: Holger Schranz, qemu-devel; +Cc: mueller-ralf
On 12/19/2016 04:05 AM, Holger Schranz wrote:
> # Strange/wrong behavior in QEMU 2.8.0-rc4
>
> After update from QEMU 2.6.2 to 2.8.0-rc4 the tape devices
> and the corresponding medium changer are no longer available
> in the VM quest system.
>
> The tape devices and the media changer are declared in the
> xml-file for libvirt. Both, tape drives and medium changer
> are avalilable via iSCSI.
>
> In a first rough investigation the login in iSCSI runs well
> but in QEMU, it seems the devices doesn't reported to the VM-Quest.
>
> ------------------
>
> Best regards
>
> Holger
>
Hi, thanks for the report; do you have a QEMU command line that we can
use to help reproduce the problem? It's easiest if we can cut libvirt
out of the loop.
What is the architecture and version of the guest?
Lastly, it looks like this worked in our 2.7 release if I'm reading you
correctly, so this is a change for the 2.8 release as far as you can
tell, right?
--js
> =====================================================================
>
> XML-Declration:
>
> .
> .
> .
>
> <!-- SCSI 2 -->
> <controller type='scsi' model='virtio-scsi' index='1'>
> <alias name='scsi1'/>
> </controller>
>
> <!-- 2 x LTO5 -->
> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
> <source protocol='iscsi'
> name='iqn.2008-09.net.fsc:server.LT260_61003/4'>
> <host name='etcsvms2.abg.fsc.net' port='3260'/>
> </source>
> <address type='drive' controller='1' bus='0' target='2' unit='1'/>
> </hostdev>
>
> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
> <source protocol='iscsi'
> name='iqn.2008-09.net.fsc:server.LT260_61003/5'>
> <host name='etcsvms2.abg.fsc.net' port='3260'/>
> </source>
> <address type='drive' controller='1' bus='0' target='2' unit='2'/>
> </hostdev>
>
> <!-- Virtual media changer Fujitsu LT260 -->
> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
> <source protocol='iscsi'
> name='iqn.2008-09.net.fsc:server.LT260_61003/6'>
> <host name='etcsvms2.abg.fsc.net' port='3260'/>
> </source>
> <address type='drive' controller='1' bus='0' target='2' unit='3'/>
> </hostdev>
>
> <!-- 2 x LTO6 (via PLP(LAN-attached library)) -->
> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
> <source protocol='iscsi'
> name='iqn.2008-09.net.fsc:server.LT60_61005/3'>
> <host name='etcsvms2.abg.fsc.net' port='3260'/>
> </source>
> <address type='drive' controller='1' bus='0' target='2' unit='4'/>
> </hostdev>
>
> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
> <source protocol='iscsi'
> name='iqn.2008-09.net.fsc:server.LT60_61005/4'>
> <host name='etcsvms2.abg.fsc.net' port='3260'/>
> </source>
> <address type='drive' controller='1' bus='0' target='2' unit='5'/>
> </hostdev>
> .
> .
> .
>
> ===============================================================================
>
>
> correct behavior/Result inside the VM-Quest together with QEMU/KVM 2.6.2
> / 2.7.0
> --
> (VCSTCS82:A)IUP1:~ # lsscsi -g
> [0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda /dev/sg0
> [3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 /dev/sg1
> [8:0:2:1] tape HP Ultrium 5-SCSI 0001 /dev/st3 /dev/sg6
> [8:0:2:2] tape HP Ultrium 5-SCSI 0001 /dev/st2 /dev/sg5
> [8:0:2:3] mediumx FUJITSU ETERNUS LT260 6.20 - /dev/sg4
> [8:0:2:4] tape HP Ultrium 6-SCSI 23AB /dev/st1 /dev/sg3
> [8:0:2:5] tape HP Ultrium 6-SCSI 23AB /dev/st0 /dev/sg2
> [11:0:0:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdb /dev/sg7
> [11:0:0:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdh /dev/sg13
> [11:0:0:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdg /dev/sg12
> [11:0:0:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdf /dev/sg11
> [11:0:0:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sde /dev/sg10
> [11:0:0:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdd /dev/sg9
> [11:0:0:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdc /dev/sg8
> [11:0:0:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdi /dev/sg14
> (VCSTCS82:A)IUP1:~ #
>
>
>
> Wrong behavior/Result inside the VM-Quest together with QEMU/KVM 2.8.0-RC4
> --
> (VCSTCS82:A)IUP1:~ # lsscsi -g
> [0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda /dev/sg0
> [3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 /dev/sg1
> [11:0:1:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdj /dev/sg10
> [11:0:1:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdp /dev/sg16
> [11:0:1:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdo /dev/sg15
> [11:0:1:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdn /dev/sg14
> [11:0:1:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sdm /dev/sg13
> [11:0:1:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdl /dev/sg12
> [11:0:1:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdk /dev/sg11
> [11:0:1:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdq /dev/sg17
> (VCSTCS82:A)IUP1:~ #
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4
2016-12-19 17:30 ` John Snow
@ 2016-12-20 16:53 ` Holger Schranz
2016-12-20 23:47 ` Fam Zheng
0 siblings, 1 reply; 12+ messages in thread
From: Holger Schranz @ 2016-12-20 16:53 UTC (permalink / raw)
To: John Snow, qemu-devel; +Cc: mueller-ralf
Hi John,
sorry or late. I will reproduce it and send you the QEMU command line
instruction.
About the guest system: LINUX SuSE SLES11 SP4.
About 2.7.0 Release: it doesn't run without the patches for the issue:
[Qemu-devel] [PATCH] iscsi: Fix divide-by-zero regression on raw SG devices
(I can't find the issue number).
Best regards
Holger
Am 19.12.2016 um 18:30 schrieb John Snow:
>
> On 12/19/2016 04:05 AM, Holger Schranz wrote:
>> # Strange/wrong behavior in QEMU 2.8.0-rc4
>>
>> After update from QEMU 2.6.2 to 2.8.0-rc4 the tape devices
>> and the corresponding medium changer are no longer available
>> in the VM quest system.
>>
>> The tape devices and the media changer are declared in the
>> xml-file for libvirt. Both, tape drives and medium changer
>> are avalilable via iSCSI.
>>
>> In a first rough investigation the login in iSCSI runs well
>> but in QEMU, it seems the devices doesn't reported to the VM-Quest.
>>
>> ------------------
>>
>> Best regards
>>
>> Holger
>>
> Hi, thanks for the report; do you have a QEMU command line that we can
> use to help reproduce the problem? It's easiest if we can cut libvirt
> out of the loop.
>
> What is the architecture and version of the guest?
>
> Lastly, it looks like this worked in our 2.7 release if I'm reading you
> correctly, so this is a change for the 2.8 release as far as you can
> tell, right?
>
> --js
>
>> =====================================================================
>>
>> XML-Declration:
>>
>> .
>> .
>> .
>>
>> <!-- SCSI 2 -->
>> <controller type='scsi' model='virtio-scsi' index='1'>
>> <alias name='scsi1'/>
>> </controller>
>>
>> <!-- 2 x LTO5 -->
>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>> <source protocol='iscsi'
>> name='iqn.2008-09.net.fsc:server.LT260_61003/4'>
>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>> </source>
>> <address type='drive' controller='1' bus='0' target='2' unit='1'/>
>> </hostdev>
>>
>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>> <source protocol='iscsi'
>> name='iqn.2008-09.net.fsc:server.LT260_61003/5'>
>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>> </source>
>> <address type='drive' controller='1' bus='0' target='2' unit='2'/>
>> </hostdev>
>>
>> <!-- Virtual media changer Fujitsu LT260 -->
>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>> <source protocol='iscsi'
>> name='iqn.2008-09.net.fsc:server.LT260_61003/6'>
>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>> </source>
>> <address type='drive' controller='1' bus='0' target='2' unit='3'/>
>> </hostdev>
>>
>> <!-- 2 x LTO6 (via PLP(LAN-attached library)) -->
>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>> <source protocol='iscsi'
>> name='iqn.2008-09.net.fsc:server.LT60_61005/3'>
>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>> </source>
>> <address type='drive' controller='1' bus='0' target='2' unit='4'/>
>> </hostdev>
>>
>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>> <source protocol='iscsi'
>> name='iqn.2008-09.net.fsc:server.LT60_61005/4'>
>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>> </source>
>> <address type='drive' controller='1' bus='0' target='2' unit='5'/>
>> </hostdev>
>> .
>> .
>> .
>>
>> ===============================================================================
>>
>>
>> correct behavior/Result inside the VM-Quest together with QEMU/KVM 2.6.2
>> / 2.7.0
>> --
>> (VCSTCS82:A)IUP1:~ # lsscsi -g
>> [0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda /dev/sg0
>> [3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 /dev/sg1
>> [8:0:2:1] tape HP Ultrium 5-SCSI 0001 /dev/st3 /dev/sg6
>> [8:0:2:2] tape HP Ultrium 5-SCSI 0001 /dev/st2 /dev/sg5
>> [8:0:2:3] mediumx FUJITSU ETERNUS LT260 6.20 - /dev/sg4
>> [8:0:2:4] tape HP Ultrium 6-SCSI 23AB /dev/st1 /dev/sg3
>> [8:0:2:5] tape HP Ultrium 6-SCSI 23AB /dev/st0 /dev/sg2
>> [11:0:0:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdb /dev/sg7
>> [11:0:0:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdh /dev/sg13
>> [11:0:0:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdg /dev/sg12
>> [11:0:0:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdf /dev/sg11
>> [11:0:0:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sde /dev/sg10
>> [11:0:0:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdd /dev/sg9
>> [11:0:0:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdc /dev/sg8
>> [11:0:0:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdi /dev/sg14
>> (VCSTCS82:A)IUP1:~ #
>>
>>
>>
>> Wrong behavior/Result inside the VM-Quest together with QEMU/KVM 2.8.0-RC4
>> --
>> (VCSTCS82:A)IUP1:~ # lsscsi -g
>> [0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda /dev/sg0
>> [3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 /dev/sg1
>> [11:0:1:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdj /dev/sg10
>> [11:0:1:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdp /dev/sg16
>> [11:0:1:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdo /dev/sg15
>> [11:0:1:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdn /dev/sg14
>> [11:0:1:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sdm /dev/sg13
>> [11:0:1:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdl /dev/sg12
>> [11:0:1:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdk /dev/sg11
>> [11:0:1:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdq /dev/sg17
>> (VCSTCS82:A)IUP1:~ #
>>
---
Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
https://www.avast.com/antivirus
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4
2016-12-20 16:53 ` Holger Schranz
@ 2016-12-20 23:47 ` Fam Zheng
2016-12-21 4:44 ` Holger Schranz
0 siblings, 1 reply; 12+ messages in thread
From: Fam Zheng @ 2016-12-20 23:47 UTC (permalink / raw)
To: Holger Schranz; +Cc: John Snow, qemu-devel, mueller-ralf
On Tue, 12/20 17:53, Holger Schranz wrote:
> Hi John,
>
> sorry or late. I will reproduce it and send you the QEMU command line
> instruction.
>
> About the guest system: LINUX SuSE SLES11 SP4.
>
> About 2.7.0 Release: it doesn't run without the patches for the issue:
> [Qemu-devel] [PATCH] iscsi: Fix divide-by-zero regression on raw SG devices
>
> (I can't find the issue number).
Are there any related message showing up in guest dmesg?
Is it possible to do a git bisect?
Also, does it work if you login with host side iscsi client (iscsiadm) and pass
the /dev/sgX to QEMU?
Fam
>
> Best regards
>
> Holger
>
> Am 19.12.2016 um 18:30 schrieb John Snow:
> >
> > On 12/19/2016 04:05 AM, Holger Schranz wrote:
> > > # Strange/wrong behavior in QEMU 2.8.0-rc4
> > >
> > > After update from QEMU 2.6.2 to 2.8.0-rc4 the tape devices
> > > and the corresponding medium changer are no longer available
> > > in the VM quest system.
> > >
> > > The tape devices and the media changer are declared in the
> > > xml-file for libvirt. Both, tape drives and medium changer
> > > are avalilable via iSCSI.
> > >
> > > In a first rough investigation the login in iSCSI runs well
> > > but in QEMU, it seems the devices doesn't reported to the VM-Quest.
> > >
> > > ------------------
> > >
> > > Best regards
> > >
> > > Holger
> > >
> > Hi, thanks for the report; do you have a QEMU command line that we can
> > use to help reproduce the problem? It's easiest if we can cut libvirt
> > out of the loop.
> >
> > What is the architecture and version of the guest?
> >
> > Lastly, it looks like this worked in our 2.7 release if I'm reading you
> > correctly, so this is a change for the 2.8 release as far as you can
> > tell, right?
> >
> > --js
> >
> > > =====================================================================
> > >
> > > XML-Declration:
> > >
> > > .
> > > .
> > > .
> > >
> > > <!-- SCSI 2 -->
> > > <controller type='scsi' model='virtio-scsi' index='1'>
> > > <alias name='scsi1'/>
> > > </controller>
> > >
> > > <!-- 2 x LTO5 -->
> > > <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
> > > <source protocol='iscsi'
> > > name='iqn.2008-09.net.fsc:server.LT260_61003/4'>
> > > <host name='etcsvms2.abg.fsc.net' port='3260'/>
> > > </source>
> > > <address type='drive' controller='1' bus='0' target='2' unit='1'/>
> > > </hostdev>
> > >
> > > <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
> > > <source protocol='iscsi'
> > > name='iqn.2008-09.net.fsc:server.LT260_61003/5'>
> > > <host name='etcsvms2.abg.fsc.net' port='3260'/>
> > > </source>
> > > <address type='drive' controller='1' bus='0' target='2' unit='2'/>
> > > </hostdev>
> > >
> > > <!-- Virtual media changer Fujitsu LT260 -->
> > > <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
> > > <source protocol='iscsi'
> > > name='iqn.2008-09.net.fsc:server.LT260_61003/6'>
> > > <host name='etcsvms2.abg.fsc.net' port='3260'/>
> > > </source>
> > > <address type='drive' controller='1' bus='0' target='2' unit='3'/>
> > > </hostdev>
> > >
> > > <!-- 2 x LTO6 (via PLP(LAN-attached library)) -->
> > > <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
> > > <source protocol='iscsi'
> > > name='iqn.2008-09.net.fsc:server.LT60_61005/3'>
> > > <host name='etcsvms2.abg.fsc.net' port='3260'/>
> > > </source>
> > > <address type='drive' controller='1' bus='0' target='2' unit='4'/>
> > > </hostdev>
> > >
> > > <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
> > > <source protocol='iscsi'
> > > name='iqn.2008-09.net.fsc:server.LT60_61005/4'>
> > > <host name='etcsvms2.abg.fsc.net' port='3260'/>
> > > </source>
> > > <address type='drive' controller='1' bus='0' target='2' unit='5'/>
> > > </hostdev>
> > > .
> > > .
> > > .
> > >
> > > ===============================================================================
> > >
> > >
> > > correct behavior/Result inside the VM-Quest together with QEMU/KVM 2.6.2
> > > / 2.7.0
> > > --
> > > (VCSTCS82:A)IUP1:~ # lsscsi -g
> > > [0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda /dev/sg0
> > > [3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 /dev/sg1
> > > [8:0:2:1] tape HP Ultrium 5-SCSI 0001 /dev/st3 /dev/sg6
> > > [8:0:2:2] tape HP Ultrium 5-SCSI 0001 /dev/st2 /dev/sg5
> > > [8:0:2:3] mediumx FUJITSU ETERNUS LT260 6.20 - /dev/sg4
> > > [8:0:2:4] tape HP Ultrium 6-SCSI 23AB /dev/st1 /dev/sg3
> > > [8:0:2:5] tape HP Ultrium 6-SCSI 23AB /dev/st0 /dev/sg2
> > > [11:0:0:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdb /dev/sg7
> > > [11:0:0:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdh /dev/sg13
> > > [11:0:0:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdg /dev/sg12
> > > [11:0:0:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdf /dev/sg11
> > > [11:0:0:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sde /dev/sg10
> > > [11:0:0:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdd /dev/sg9
> > > [11:0:0:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdc /dev/sg8
> > > [11:0:0:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdi /dev/sg14
> > > (VCSTCS82:A)IUP1:~ #
> > >
> > >
> > >
> > > Wrong behavior/Result inside the VM-Quest together with QEMU/KVM 2.8.0-RC4
> > > --
> > > (VCSTCS82:A)IUP1:~ # lsscsi -g
> > > [0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda /dev/sg0
> > > [3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 /dev/sg1
> > > [11:0:1:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdj /dev/sg10
> > > [11:0:1:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdp /dev/sg16
> > > [11:0:1:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdo /dev/sg15
> > > [11:0:1:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdn /dev/sg14
> > > [11:0:1:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sdm /dev/sg13
> > > [11:0:1:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdl /dev/sg12
> > > [11:0:1:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdk /dev/sg11
> > > [11:0:1:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdq /dev/sg17
> > > (VCSTCS82:A)IUP1:~ #
> > >
>
>
> ---
> Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
> https://www.avast.com/antivirus
>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4
2016-12-20 23:47 ` Fam Zheng
@ 2016-12-21 4:44 ` Holger Schranz
2016-12-21 11:51 ` Holger Schranz
2016-12-22 6:22 ` Fam Zheng
0 siblings, 2 replies; 12+ messages in thread
From: Holger Schranz @ 2016-12-21 4:44 UTC (permalink / raw)
To: Fam Zheng; +Cc: mueller-ralf, John Snow, qemu-devel
Hi Fam,
meanwhile I have sent the requested QEMU CLI direct to John. Your request
I will try after the reinstall with the released version.So please wait
for a while.
Best regards
Holger
Am 21.12.2016 um 00:47 schrieb Fam Zheng:
> On Tue, 12/20 17:53, Holger Schranz wrote:
>> Hi John,
>>
>> sorry or late. I will reproduce it and send you the QEMU command line
>> instruction.
>>
>> About the guest system: LINUX SuSE SLES11 SP4.
>>
>> About 2.7.0 Release: it doesn't run without the patches for the issue:
>> [Qemu-devel] [PATCH] iscsi: Fix divide-by-zero regression on raw SG devices
>>
>> (I can't find the issue number).
> Are there any related message showing up in guest dmesg?
>
> Is it possible to do a git bisect?
>
> Also, does it work if you login with host side iscsi client (iscsiadm) and pass
> the /dev/sgX to QEMU?
>
> Fam
>
>> Best regards
>>
>> Holger
>>
>> Am 19.12.2016 um 18:30 schrieb John Snow:
>>> On 12/19/2016 04:05 AM, Holger Schranz wrote:
>>>> # Strange/wrong behavior in QEMU 2.8.0-rc4
>>>>
>>>> After update from QEMU 2.6.2 to 2.8.0-rc4 the tape devices
>>>> and the corresponding medium changer are no longer available
>>>> in the VM quest system.
>>>>
>>>> The tape devices and the media changer are declared in the
>>>> xml-file for libvirt. Both, tape drives and medium changer
>>>> are avalilable via iSCSI.
>>>>
>>>> In a first rough investigation the login in iSCSI runs well
>>>> but in QEMU, it seems the devices doesn't reported to the VM-Quest.
>>>>
>>>> ------------------
>>>>
>>>> Best regards
>>>>
>>>> Holger
>>>>
>>> Hi, thanks for the report; do you have a QEMU command line that we can
>>> use to help reproduce the problem? It's easiest if we can cut libvirt
>>> out of the loop.
>>>
>>> What is the architecture and version of the guest?
>>>
>>> Lastly, it looks like this worked in our 2.7 release if I'm reading you
>>> correctly, so this is a change for the 2.8 release as far as you can
>>> tell, right?
>>>
>>> --js
>>>
>>>> =====================================================================
>>>>
>>>> XML-Declration:
>>>>
>>>> .
>>>> .
>>>> .
>>>>
>>>> <!-- SCSI 2 -->
>>>> <controller type='scsi' model='virtio-scsi' index='1'>
>>>> <alias name='scsi1'/>
>>>> </controller>
>>>>
>>>> <!-- 2 x LTO5 -->
>>>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>>>> <source protocol='iscsi'
>>>> name='iqn.2008-09.net.fsc:server.LT260_61003/4'>
>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>> </source>
>>>> <address type='drive' controller='1' bus='0' target='2' unit='1'/>
>>>> </hostdev>
>>>>
>>>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>>>> <source protocol='iscsi'
>>>> name='iqn.2008-09.net.fsc:server.LT260_61003/5'>
>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>> </source>
>>>> <address type='drive' controller='1' bus='0' target='2' unit='2'/>
>>>> </hostdev>
>>>>
>>>> <!-- Virtual media changer Fujitsu LT260 -->
>>>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>>>> <source protocol='iscsi'
>>>> name='iqn.2008-09.net.fsc:server.LT260_61003/6'>
>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>> </source>
>>>> <address type='drive' controller='1' bus='0' target='2' unit='3'/>
>>>> </hostdev>
>>>>
>>>> <!-- 2 x LTO6 (via PLP(LAN-attached library)) -->
>>>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>>>> <source protocol='iscsi'
>>>> name='iqn.2008-09.net.fsc:server.LT60_61005/3'>
>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>> </source>
>>>> <address type='drive' controller='1' bus='0' target='2' unit='4'/>
>>>> </hostdev>
>>>>
>>>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>>>> <source protocol='iscsi'
>>>> name='iqn.2008-09.net.fsc:server.LT60_61005/4'>
>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>> </source>
>>>> <address type='drive' controller='1' bus='0' target='2' unit='5'/>
>>>> </hostdev>
>>>> .
>>>> .
>>>> .
>>>>
>>>> ===============================================================================
>>>>
>>>>
>>>> correct behavior/Result inside the VM-Quest together with QEMU/KVM 2.6.2
>>>> / 2.7.0
>>>> --
>>>> (VCSTCS82:A)IUP1:~ # lsscsi -g
>>>> [0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda /dev/sg0
>>>> [3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 /dev/sg1
>>>> [8:0:2:1] tape HP Ultrium 5-SCSI 0001 /dev/st3 /dev/sg6
>>>> [8:0:2:2] tape HP Ultrium 5-SCSI 0001 /dev/st2 /dev/sg5
>>>> [8:0:2:3] mediumx FUJITSU ETERNUS LT260 6.20 - /dev/sg4
>>>> [8:0:2:4] tape HP Ultrium 6-SCSI 23AB /dev/st1 /dev/sg3
>>>> [8:0:2:5] tape HP Ultrium 6-SCSI 23AB /dev/st0 /dev/sg2
>>>> [11:0:0:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdb /dev/sg7
>>>> [11:0:0:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdh /dev/sg13
>>>> [11:0:0:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdg /dev/sg12
>>>> [11:0:0:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdf /dev/sg11
>>>> [11:0:0:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sde /dev/sg10
>>>> [11:0:0:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdd /dev/sg9
>>>> [11:0:0:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdc /dev/sg8
>>>> [11:0:0:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdi /dev/sg14
>>>> (VCSTCS82:A)IUP1:~ #
>>>>
>>>>
>>>>
>>>> Wrong behavior/Result inside the VM-Quest together with QEMU/KVM 2.8.0-RC4
>>>> --
>>>> (VCSTCS82:A)IUP1:~ # lsscsi -g
>>>> [0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda /dev/sg0
>>>> [3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 /dev/sg1
>>>> [11:0:1:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdj /dev/sg10
>>>> [11:0:1:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdp /dev/sg16
>>>> [11:0:1:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdo /dev/sg15
>>>> [11:0:1:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdn /dev/sg14
>>>> [11:0:1:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sdm /dev/sg13
>>>> [11:0:1:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdl /dev/sg12
>>>> [11:0:1:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdk /dev/sg11
>>>> [11:0:1:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdq /dev/sg17
>>>> (VCSTCS82:A)IUP1:~ #
>>>>
>>
>> ---
>> Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
>> https://www.avast.com/antivirus
>>
>>
---
Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
https://www.avast.com/antivirus
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4
2016-12-21 4:44 ` Holger Schranz
@ 2016-12-21 11:51 ` Holger Schranz
2016-12-21 12:39 ` Holger Schranz
2016-12-22 6:22 ` Fam Zheng
1 sibling, 1 reply; 12+ messages in thread
From: Holger Schranz @ 2016-12-21 11:51 UTC (permalink / raw)
To: Fam Zheng; +Cc: mueller-ralf, John Snow, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 8063 bytes --]
Hi Fam, John,
meanwhile i have installed the 2.8.0 from the official wiki.qemu.org
(tarball says rc4 ??).
About dmesg, I have attached the dmesg from both version. In a short
view ... in 2.6.2 you see the target stx/sgx and the controller for
it. In the 2.8.0. nothing to see ... not controller nor devices.
"git bisect" isn't fit to me :(. I never use it.
The request for testing with iscsiadm host side to pass it to QEMU
I haven't done related to the fact a can't see the controller for the
iscsi devices in the VM guest. Should I do this in any cases?
Best regards
Holger
Am 21.12.2016 um 05:44 schrieb Holger Schranz:
> Hi Fam,
>
> meanwhile I have sent the requested QEMU CLI direct to John. Your request
> I will try after the reinstall with the released version.So please wait
> for a while.
>
> Best regards
>
> Holger
>
> Am 21.12.2016 um 00:47 schrieb Fam Zheng:
>> On Tue, 12/20 17:53, Holger Schranz wrote:
>>> Hi John,
>>>
>>> sorry or late. I will reproduce it and send you the QEMU command line
>>> instruction.
>>>
>>> About the guest system: LINUX SuSE SLES11 SP4.
>>>
>>> About 2.7.0 Release: it doesn't run without the patches for the issue:
>>> [Qemu-devel] [PATCH] iscsi: Fix divide-by-zero regression on raw SG
>>> devices
>>>
>>> (I can't find the issue number).
>> Are there any related message showing up in guest dmesg?
>>
>> Is it possible to do a git bisect?
>>
>> Also, does it work if you login with host side iscsi client
>> (iscsiadm) and pass
>> the /dev/sgX to QEMU?
>>
>> Fam
>>
>>> Best regards
>>>
>>> Holger
>>>
>>> Am 19.12.2016 um 18:30 schrieb John Snow:
>>>> On 12/19/2016 04:05 AM, Holger Schranz wrote:
>>>>> # Strange/wrong behavior in QEMU 2.8.0-rc4
>>>>>
>>>>> After update from QEMU 2.6.2 to 2.8.0-rc4 the tape devices
>>>>> and the corresponding medium changer are no longer available
>>>>> in the VM quest system.
>>>>>
>>>>> The tape devices and the media changer are declared in the
>>>>> xml-file for libvirt. Both, tape drives and medium changer
>>>>> are avalilable via iSCSI.
>>>>>
>>>>> In a first rough investigation the login in iSCSI runs well
>>>>> but in QEMU, it seems the devices doesn't reported to the VM-Quest.
>>>>>
>>>>> ------------------
>>>>>
>>>>> Best regards
>>>>>
>>>>> Holger
>>>>>
>>>> Hi, thanks for the report; do you have a QEMU command line that we can
>>>> use to help reproduce the problem? It's easiest if we can cut libvirt
>>>> out of the loop.
>>>>
>>>> What is the architecture and version of the guest?
>>>>
>>>> Lastly, it looks like this worked in our 2.7 release if I'm reading
>>>> you
>>>> correctly, so this is a change for the 2.8 release as far as you can
>>>> tell, right?
>>>>
>>>> --js
>>>>
>>>>> =====================================================================
>>>>>
>>>>> XML-Declration:
>>>>>
>>>>> .
>>>>> .
>>>>> .
>>>>>
>>>>> <!-- SCSI 2 -->
>>>>> <controller type='scsi' model='virtio-scsi' index='1'>
>>>>> <alias name='scsi1'/>
>>>>> </controller>
>>>>>
>>>>> <!-- 2 x LTO5 -->
>>>>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>>>>> <source protocol='iscsi'
>>>>> name='iqn.2008-09.net.fsc:server.LT260_61003/4'>
>>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>>> </source>
>>>>> <address type='drive' controller='1' bus='0' target='2'
>>>>> unit='1'/>
>>>>> </hostdev>
>>>>>
>>>>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>>>>> <source protocol='iscsi'
>>>>> name='iqn.2008-09.net.fsc:server.LT260_61003/5'>
>>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>>> </source>
>>>>> <address type='drive' controller='1' bus='0' target='2'
>>>>> unit='2'/>
>>>>> </hostdev>
>>>>>
>>>>> <!-- Virtual media changer Fujitsu LT260 -->
>>>>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>>>>> <source protocol='iscsi'
>>>>> name='iqn.2008-09.net.fsc:server.LT260_61003/6'>
>>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>>> </source>
>>>>> <address type='drive' controller='1' bus='0' target='2'
>>>>> unit='3'/>
>>>>> </hostdev>
>>>>>
>>>>> <!-- 2 x LTO6 (via PLP(LAN-attached library)) -->
>>>>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>>>>> <source protocol='iscsi'
>>>>> name='iqn.2008-09.net.fsc:server.LT60_61005/3'>
>>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>>> </source>
>>>>> <address type='drive' controller='1' bus='0' target='2'
>>>>> unit='4'/>
>>>>> </hostdev>
>>>>>
>>>>> <hostdev mode='subsystem' type='scsi' managed='no' rawio='yes'>
>>>>> <source protocol='iscsi'
>>>>> name='iqn.2008-09.net.fsc:server.LT60_61005/4'>
>>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>>> </source>
>>>>> <address type='drive' controller='1' bus='0' target='2'
>>>>> unit='5'/>
>>>>> </hostdev>
>>>>> .
>>>>> .
>>>>> .
>>>>>
>>>>> ===============================================================================
>>>>>
>>>>>
>>>>>
>>>>> correct behavior/Result inside the VM-Quest together with QEMU/KVM
>>>>> 2.6.2
>>>>> / 2.7.0
>>>>> --
>>>>> (VCSTCS82:A)IUP1:~ # lsscsi -g
>>>>> [0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda /dev/sg0
>>>>> [3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 /dev/sg1
>>>>> [8:0:2:1] tape HP Ultrium 5-SCSI 0001 /dev/st3 /dev/sg6
>>>>> [8:0:2:2] tape HP Ultrium 5-SCSI 0001 /dev/st2 /dev/sg5
>>>>> [8:0:2:3] mediumx FUJITSU ETERNUS LT260 6.20 - /dev/sg4
>>>>> [8:0:2:4] tape HP Ultrium 6-SCSI 23AB /dev/st1 /dev/sg3
>>>>> [8:0:2:5] tape HP Ultrium 6-SCSI 23AB /dev/st0 /dev/sg2
>>>>> [11:0:0:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdb /dev/sg7
>>>>> [11:0:0:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdh
>>>>> /dev/sg13
>>>>> [11:0:0:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdg
>>>>> /dev/sg12
>>>>> [11:0:0:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdf
>>>>> /dev/sg11
>>>>> [11:0:0:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sde
>>>>> /dev/sg10
>>>>> [11:0:0:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdd /dev/sg9
>>>>> [11:0:0:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdc /dev/sg8
>>>>> [11:0:0:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdi
>>>>> /dev/sg14
>>>>> (VCSTCS82:A)IUP1:~ #
>>>>>
>>>>>
>>>>>
>>>>> Wrong behavior/Result inside the VM-Quest together with QEMU/KVM
>>>>> 2.8.0-RC4
>>>>> --
>>>>> (VCSTCS82:A)IUP1:~ # lsscsi -g
>>>>> [0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda /dev/sg0
>>>>> [3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 /dev/sg1
>>>>> [11:0:1:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdj
>>>>> /dev/sg10
>>>>> [11:0:1:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdp
>>>>> /dev/sg16
>>>>> [11:0:1:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdo
>>>>> /dev/sg15
>>>>> [11:0:1:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdn
>>>>> /dev/sg14
>>>>> [11:0:1:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sdm
>>>>> /dev/sg13
>>>>> [11:0:1:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdl
>>>>> /dev/sg12
>>>>> [11:0:1:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdk
>>>>> /dev/sg11
>>>>> [11:0:1:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdq
>>>>> /dev/sg17
>>>>> (VCSTCS82:A)IUP1:~ #
>>>>>
>>>
>>> ---
>>> Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
>>> https://www.avast.com/antivirus
>>>
>>>
>
>
> ---
> Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
> https://www.avast.com/antivirus
>
>
---
Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
https://www.avast.com/antivirus
[-- Attachment #2: dmesg-2.6.2.txt --]
[-- Type: text/plain, Size: 68338 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.101-80-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Fri Jul 15 14:30:41 UTC 2016 (eb2ba81)
[ 0.000000] Command line: root=/dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part7 instmode=cd resume=/dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part5 splash=silent nmi_watchdog=0 audit=1 vga=0x318 crashkernel=128M@64M tsc=reliable elevator=noop
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffdf000 (usable)
[ 0.000000] BIOS-e820: 000000007ffdf000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000380000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.8 present.
[ 0.000000] DMI: FUJITSU PRIMERGY RX300 S8/D2939-B1, BIOS V4.6.5.4 R1.14.0 for D2939-B1x 10/13/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x380000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] last_pfn = 0x7ffdf max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6af0] f6af0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ffdf000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ffdf000 page 4k
[ 0.000000] kernel direct mapping tables up to 0x7ffdefff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] init_memory_mapping: 0000000100000000-0000000380000000
[ 0.000000] 0100000000 - 0380000000 page 2M
[ 0.000000] kernel direct mapping tables up to 0x37fffffff @ [mem 0x7ffd4000-0x7ffdefff]
[ 0.000000] nmi ring buffer: 262144
[ 0.000000] RAMDISK: 37a3d000 - 37ff0000
[ 0.000000] Reserving 128MB of memory at 64MB for crashkernel (System RAM: 14336MB)
[ 0.000000] ACPI: RSDP 00000000000f6aa0 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000007ffe1f09 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000007ffe1da1 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000007ffdfc00 021A1 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 000000007ffdfbc0 00040
[ 0.000000] ACPI: APIC 000000007ffe1e15 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000007ffe1e95 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: MCFG 000000007ffe1ecd 0003C (v01 BOCHS BXPCMCFG 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000380000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000380000000
[ 0.000000] NODE_DATA [000000037ff99000 - 000000037ffbffff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1bef801, boot clock
[ 0.000000] [ffffea0000000000-ffffea000c3fffff] PMD -> [ffff880373600000-ffff88037ddfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00380000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ffdf
[ 0.000000] 0: 0x00100000 -> 0x00380000
[ 0.000000] On node 0 totalpages: 3145582
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 505879 pages, LIFO batch:31
[ 0.000000] Normal zone: 35840 pages used for memmap
[ 0.000000] Normal zone: 2585600 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007ffdf000 - 0000000080000000
[ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000b0000000
[ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000feffc000
[ 0.000000] PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
[ 0.000000] PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ed1c000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88037fc00000 s71680 r8192 d22528 u1048576
[ 0.000000] pcpu-alloc: s71680 r8192 d22528 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] kvm-clock: cpu 0, msr 3:7fc10801, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095401
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part7 instmode=cd resume=/dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part5 splash=silent nmi_watchdog=0 audit=1 vga=0x318 crashkernel=128M@64M tsc=reliable elevator=noop
[ 0.000000] bootsplash: silent mode.
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 12190096k/14680064k available (4566k kernel code, 2097736k absent, 392232k reserved, 7581k data, 1360k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:262400 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 100663296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Detected 2593.990 MHz processor.
[ 0.008000] Calibrating delay loop (skipped) preset value.. 5187.98 BogoMIPS (lpj=10375960)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.008000] Security Framework initialized
[ 0.008000] AppArmor: AppArmor initialized
[ 0.008000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.008465] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009761] Mount-cache hash table entries: 256
[ 0.009837] Initializing cgroup subsys cpuacct
[ 0.009839] Initializing cgroup subsys memory
[ 0.009847] Initializing cgroup subsys devices
[ 0.009849] Initializing cgroup subsys freezer
[ 0.009850] Initializing cgroup subsys net_cls
[ 0.009852] Initializing cgroup subsys blkio
[ 0.009855] Initializing cgroup subsys perf_event
[ 0.009914] mce: CPU supports 10 MCE banks
[ 0.011421] ACPI: Core revision 20110413
[ 0.012406] Enabling x2apic
[ 0.012412] Enabled x2apic
[ 0.012576] Switched APIC routing to physical x2apic.
[ 0.013319] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.013321] CPU0: Intel QEMU Virtual CPU version 2.5+ stepping 03
[ 0.016000] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.016000] Failed to access perfctr msr (MSR c1 is 0)
[ 0.016000] Booting Node 0, Processors #1 Ok.
[ 0.024008] kvm-clock: cpu 1, msr 3:7fd10801, secondary cpu clock
[ 0.024016] Brought up 2 CPUs
[ 0.024019] Total of 2 processors activated (10375.96 BogoMIPS).
[ 0.024014] KVM setup async PF for cpu 1
[ 0.024298] devtmpfs: initialized
[ 0.029725] print_constraints: dummy:
[ 0.029725] Time: 11:10:12 Date: 12/21/16
[ 0.029725] NET: Registered protocol family 16
[ 0.029725] ACPI: bus type pci registered
[ 0.029725] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[ 0.029725] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[ 0.029870] PCI: Using configuration type 1 for base access
[ 0.032099] bio: create slab <bio-0> at 0
[ 0.032508] ACPI: EC: Look up EC in DSDT
[ 0.034762] ACPI: Interpreter enabled
[ 0.034766] ACPI: (supports S0 S3 S4 S5)
[ 0.034779] ACPI: Using IOAPIC for interrupt routing
[ 0.037021] ACPI: No dock devices found.
[ 0.037025] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.037082] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.037112] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.037114] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.037116] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.037118] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.037148] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[ 0.037354] pci 0000:00:01.0: [8086:3420] type 1 class 0x000604
[ 0.044292] pci 0000:00:02.0: [8086:3420] type 1 class 0x000604
[ 0.053551] pci 0000:00:03.0: [8086:3420] type 1 class 0x000604
[ 0.062069] pci 0000:00:04.0: [8086:100f] type 0 class 0x000200
[ 0.064026] pci 0000:00:04.0: reg 10: [mem 0xfe980000-0xfe99ffff]
[ 0.068029] pci 0000:00:04.0: reg 14: [io 0xb100-0xb13f]
[ 0.094132] pci 0000:00:04.0: reg 30: [mem 0xfe800000-0xfe83ffff pref]
[ 0.096084] pci 0000:00:05.0: [8086:3420] type 1 class 0x000604
[ 0.106446] pci 0000:00:06.0: [1000:0079] type 0 class 0x000104
[ 0.108026] pci 0000:00:06.0: reg 10: [io 0xb000-0xb0ff]
[ 0.116050] pci 0000:00:06.0: reg 14: [mem 0xfea30000-0xfea33fff 64bit]
[ 0.123417] pci 0000:00:06.0: reg 1c: [mem 0xfe840000-0xfe87ffff 64bit]
[ 0.140312] pci 0000:00:0b.0: [1af4:1050] type 0 class 0x000300
[ 0.144030] pci 0000:00:0b.0: reg 10: [mem 0xfa800000-0xfaffffff pref]
[ 0.157862] pci 0000:00:0b.0: reg 18: [mem 0xfb000000-0xfb7fffff 64bit pref]
[ 0.164034] pci 0000:00:0b.0: reg 20: [mem 0xfea34000-0xfea34fff]
[ 0.176037] pci 0000:00:0b.0: reg 30: [mem 0xfea20000-0xfea2ffff pref]
[ 0.180358] pci 0000:00:10.0: [8086:100f] type 0 class 0x000200
[ 0.185686] pci 0000:00:10.0: reg 10: [mem 0xfe9a0000-0xfe9bffff]
[ 0.188031] pci 0000:00:10.0: reg 14: [io 0xb140-0xb17f]
[ 0.212037] pci 0000:00:10.0: reg 30: [mem 0xfe880000-0xfe8bffff pref]
[ 0.214177] pci 0000:00:11.0: [8086:100f] type 0 class 0x000200
[ 0.216034] pci 0000:00:11.0: reg 10: [mem 0xfe9c0000-0xfe9dffff]
[ 0.221781] pci 0000:00:11.0: reg 14: [io 0xb180-0xb1bf]
[ 0.246338] pci 0000:00:11.0: reg 30: [mem 0xfe8c0000-0xfe8fffff pref]
[ 0.252580] pci 0000:00:12.0: [8086:100f] type 0 class 0x000200
[ 0.256048] pci 0000:00:12.0: reg 10: [mem 0xfe9e0000-0xfe9fffff]
[ 0.265462] pci 0000:00:12.0: reg 14: [io 0xb1c0-0xb1ff]
[ 0.289423] pci 0000:00:12.0: reg 30: [mem 0xfe900000-0xfe93ffff pref]
[ 0.292084] pci 0000:00:13.0: [8086:100f] type 0 class 0x000200
[ 0.294136] pci 0000:00:13.0: reg 10: [mem 0xfea00000-0xfea1ffff]
[ 0.297957] pci 0000:00:13.0: reg 14: [io 0xb200-0xb23f]
[ 0.322076] pci 0000:00:13.0: reg 30: [mem 0xfe940000-0xfe97ffff pref]
[ 0.324137] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.332157] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
[ 0.332442] pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106
[ 0.354133] pci 0000:00:1f.2: reg 20: [io 0xb280-0xb29f]
[ 0.358005] pci 0000:00:1f.2: reg 24: [mem 0xfea35000-0xfea35fff]
[ 0.365807] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.376043] pci 0000:00:1f.3: reg 20: [io 0x0700-0x073f]
[ 0.384176] pci 0000:01:00.0: [1af4:1004] type 0 class 0x000100
[ 0.386060] pci 0000:01:00.0: reg 10: [io 0xa000-0xa03f]
[ 0.391544] pci 0000:01:00.0: reg 14: [mem 0xfe600000-0xfe600fff]
[ 0.416186] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.416213] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.416223] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff]
[ 0.416241] pci 0000:00:01.0: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref]
[ 0.419044] pci 0000:02:00.0: [1000:0012] type 0 class 0x000100
[ 0.420052] pci 0000:02:00.0: reg 10: [io 0x9000-0x90ff]
[ 0.430007] pci 0000:02:00.0: reg 14: [mem 0xfe402000-0xfe4023ff]
[ 0.436053] pci 0000:02:00.0: reg 18: [mem 0xfe400000-0xfe401fff]
[ 0.468093] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.468107] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
[ 0.468116] pci 0000:00:02.0: bridge window [mem 0xfe400000-0xfe5fffff]
[ 0.468133] pci 0000:00:02.0: bridge window [mem 0xfc800000-0xfc9fffff 64bit pref]
[ 0.472178] pci 0000:03:00.0: [1af4:1003] type 0 class 0x000780
[ 0.474328] pci 0000:03:00.0: reg 10: [io 0x8000-0x801f]
[ 0.477960] pci 0000:03:00.0: reg 14: [mem 0xfe200000-0xfe200fff]
[ 0.504169] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.504183] pci 0000:00:03.0: bridge window [io 0x8000-0x8fff]
[ 0.504192] pci 0000:00:03.0: bridge window [mem 0xfe200000-0xfe3fffff]
[ 0.504209] pci 0000:00:03.0: bridge window [mem 0xfc600000-0xfc7fffff 64bit pref]
[ 0.506344] pci 0000:04:00.0: [1af4:1002] type 0 class 0x0000ff
[ 0.508033] pci 0000:04:00.0: reg 10: [io 0x7000-0x701f]
[ 0.523862] pci 0000:00:05.0: PCI bridge to [bus 04-04]
[ 0.523878] pci 0000:00:05.0: bridge window [io 0x7000-0x7fff]
[ 0.523889] pci 0000:00:05.0: bridge window [mem 0xfe000000-0xfe1fffff]
[ 0.523908] pci 0000:00:05.0: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref]
[ 0.528182] pci 0000:05:00.0: [1b36:0001] type 1 class 0x000604
[ 0.530682] pci 0000:05:00.0: reg 10: [mem 0xfde00000-0xfde000ff 64bit]
[ 0.537733] pci 0000:05:01.0: [1b36:0001] type 1 class 0x000604
[ 0.540075] pci 0000:05:01.0: reg 10: [mem 0xfde01000-0xfde010ff 64bit]
[ 0.548319] pci 0000:05:02.0: [1b36:0001] type 1 class 0x000604
[ 0.551890] pci 0000:05:02.0: reg 10: [mem 0xfde02000-0xfde020ff 64bit]
[ 0.556321] pci 0000:05:03.0: [1b36:0001] type 1 class 0x000604
[ 0.560075] pci 0000:05:03.0: reg 10: [mem 0xfde03000-0xfde030ff 64bit]
[ 0.568281] pci 0000:05:04.0: [1b36:0001] type 1 class 0x000604
[ 0.570183] pci 0000:05:04.0: reg 10: [mem 0xfde04000-0xfde040ff 64bit]
[ 0.577590] pci 0000:05:05.0: [1b36:0001] type 1 class 0x000604
[ 0.579812] pci 0000:05:05.0: reg 10: [mem 0xfde05000-0xfde050ff 64bit]
[ 0.584355] pci 0000:00:1e.0: PCI bridge to [bus 05-0b] (subtractive decode)
[ 0.584368] pci 0000:00:1e.0: bridge window [io 0x1000-0x6fff]
[ 0.584377] pci 0000:00:1e.0: bridge window [mem 0xfd200000-0xfdffffff]
[ 0.584394] pci 0000:00:1e.0: bridge window [mem 0xfb800000-0xfc3fffff 64bit pref]
[ 0.584396] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.584397] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.584399] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.584400] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.585720] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[ 0.585731] pci 0000:05:00.0: bridge window [io 0x6000-0x6fff]
[ 0.585740] pci 0000:05:00.0: bridge window [mem 0xfdc00000-0xfddfffff]
[ 0.585764] pci 0000:05:00.0: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
[ 0.590832] pci 0000:05:01.0: PCI bridge to [bus 07-07]
[ 0.590844] pci 0000:05:01.0: bridge window [io 0x5000-0x5fff]
[ 0.590853] pci 0000:05:01.0: bridge window [mem 0xfda00000-0xfdbfffff]
[ 0.590870] pci 0000:05:01.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
[ 0.593201] pci 0000:08:01.0: [8086:100f] type 0 class 0x000200
[ 0.595130] pci 0000:08:01.0: reg 10: [mem 0xfd840000-0xfd85ffff]
[ 0.598008] pci 0000:08:01.0: reg 14: [io 0x4000-0x403f]
[ 0.624064] pci 0000:08:01.0: reg 30: [mem 0xfd800000-0xfd83ffff pref]
[ 0.626125] pci 0000:05:02.0: PCI bridge to [bus 08-08]
[ 0.626138] pci 0000:05:02.0: bridge window [io 0x4000-0x4fff]
[ 0.626164] pci 0000:05:02.0: bridge window [mem 0xfd800000-0xfd9fffff]
[ 0.626183] pci 0000:05:02.0: bridge window [mem 0xfbe00000-0xfbffffff 64bit pref]
[ 0.628330] pci 0000:05:03.0: PCI bridge to [bus 09-09]
[ 0.628342] pci 0000:05:03.0: bridge window [io 0x3000-0x3fff]
[ 0.628352] pci 0000:05:03.0: bridge window [mem 0xfd600000-0xfd7fffff]
[ 0.628370] pci 0000:05:03.0: bridge window [mem 0xfbc00000-0xfbdfffff 64bit pref]
[ 0.632310] pci 0000:0a:01.0: [8086:100f] type 0 class 0x000200
[ 0.634256] pci 0000:0a:01.0: reg 10: [mem 0xfd440000-0xfd45ffff]
[ 0.637899] pci 0000:0a:01.0: reg 14: [io 0x2000-0x203f]
[ 0.664070] pci 0000:0a:01.0: reg 30: [mem 0xfd400000-0xfd43ffff pref]
[ 0.669690] pci 0000:05:04.0: PCI bridge to [bus 0a-0a]
[ 0.669706] pci 0000:05:04.0: bridge window [io 0x2000-0x2fff]
[ 0.669718] pci 0000:05:04.0: bridge window [mem 0xfd400000-0xfd5fffff]
[ 0.669738] pci 0000:05:04.0: bridge window [mem 0xfba00000-0xfbbfffff 64bit pref]
[ 0.672248] pci 0000:0b:01.0: [8086:100f] type 0 class 0x000200
[ 0.674690] pci 0000:0b:01.0: reg 10: [mem 0xfd240000-0xfd25ffff]
[ 0.680063] pci 0000:0b:01.0: reg 14: [io 0x1000-0x103f]
[ 0.708054] pci 0000:0b:01.0: reg 30: [mem 0xfd200000-0xfd23ffff pref]
[ 0.710569] pci 0000:05:05.0: PCI bridge to [bus 0b-0b]
[ 0.710583] pci 0000:05:05.0: bridge window [io 0x1000-0x1fff]
[ 0.710593] pci 0000:05:05.0: bridge window [mem 0xfd200000-0xfd3fffff]
[ 0.710612] pci 0000:05:05.0: bridge window [mem 0xfb800000-0xfb9fffff 64bit pref]
[ 0.742533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.744178] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.744265] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.747392] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.747510] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.747595] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.747695] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.747783] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11)
[ 0.747874] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11)
[ 0.747954] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11)
[ 0.748065] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11)
[ 0.748125] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
[ 0.748144] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
[ 0.748155] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
[ 0.748184] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
[ 0.748202] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
[ 0.748212] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
[ 0.748226] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
[ 0.748236] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
[ 0.748344] vgaarb: device added: PCI:0000:00:0b.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.748353] vgaarb: loaded
[ 0.748486] PCI: Using ACPI for IRQ routing
[ 0.788738] PCI: pci_cache_line_size set to 64 bytes
[ 0.788997] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.788999] reserve RAM buffer: 000000007ffdf000 - 000000007fffffff
[ 0.789064] NetLabel: Initializing
[ 0.789066] NetLabel: domain hash size = 128
[ 0.789067] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.789074] NetLabel: unlabeled traffic allowed by default
[ 0.789091] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.789101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.789105] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.792064] Switching to clocksource kvm-clock
[ 0.792861] AppArmor: AppArmor Filesystem Enabled
[ 0.792877] pnp: PnP ACPI init
[ 0.792886] ACPI: bus type pnp registered
[ 0.792904] pnp 00:00: [bus 00-ff]
[ 0.792905] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.792907] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.792908] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.792909] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.792910] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.792939] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.792946] pnp 00:01: [io 0x0070-0x0071]
[ 0.792967] pnp 00:01: [irq 8]
[ 0.792968] pnp 00:01: [io 0x0072-0x0077]
[ 0.792983] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.792999] pnp 00:02: [io 0x0060]
[ 0.793000] pnp 00:02: [io 0x0064]
[ 0.793010] pnp 00:02: [irq 1]
[ 0.793025] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.793044] pnp 00:03: [irq 12]
[ 0.793057] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.793107] pnp 00:04: [io 0x03f8-0x03ff]
[ 0.793129] pnp 00:04: [irq 4]
[ 0.793144] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.793175] pnp 00:05: [io 0x0620-0x062f]
[ 0.793188] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 0.793195] pnp 00:06: [io 0x0cd8-0x0cf7]
[ 0.793207] pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 0.793258] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.793274] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.793405] pnp: PnP ACPI: found 8 devices
[ 0.793407] ACPI: ACPI bus type pnp unregistered
[ 0.798596] PCI: max bus depth: 2 pci_try_num: 3
[ 0.830503] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.830516] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.834909] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff]
[ 0.838155] pci 0000:00:01.0: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref]
[ 0.844453] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.844466] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
[ 0.847820] pci 0000:00:02.0: bridge window [mem 0xfe400000-0xfe5fffff]
[ 0.850032] pci 0000:00:02.0: bridge window [mem 0xfc800000-0xfc9fffff 64bit pref]
[ 0.855521] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.855535] pci 0000:00:03.0: bridge window [io 0x8000-0x8fff]
[ 0.858729] pci 0000:00:03.0: bridge window [mem 0xfe200000-0xfe3fffff]
[ 0.861119] pci 0000:00:03.0: bridge window [mem 0xfc600000-0xfc7fffff 64bit pref]
[ 0.866598] pci 0000:00:05.0: PCI bridge to [bus 04-04]
[ 0.868770] pci 0000:00:05.0: bridge window [io 0x7000-0x7fff]
[ 0.872222] pci 0000:00:05.0: bridge window [mem 0xfe000000-0xfe1fffff]
[ 0.874420] pci 0000:00:05.0: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref]
[ 0.878957] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[ 0.880159] pci 0000:05:00.0: bridge window [io 0x6000-0x6fff]
[ 0.883457] pci 0000:05:00.0: bridge window [mem 0xfdc00000-0xfddfffff]
[ 0.885602] pci 0000:05:00.0: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
[ 0.889921] pci 0000:05:01.0: PCI bridge to [bus 07-07]
[ 0.889932] pci 0000:05:01.0: bridge window [io 0x5000-0x5fff]
[ 0.894641] pci 0000:05:01.0: bridge window [mem 0xfda00000-0xfdbfffff]
[ 0.896820] pci 0000:05:01.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
[ 0.901200] pci 0000:05:02.0: PCI bridge to [bus 08-08]
[ 0.902238] pci 0000:05:02.0: bridge window [io 0x4000-0x4fff]
[ 0.905483] pci 0000:05:02.0: bridge window [mem 0xfd800000-0xfd9fffff]
[ 0.907563] pci 0000:05:02.0: bridge window [mem 0xfbe00000-0xfbffffff 64bit pref]
[ 0.911984] pci 0000:05:03.0: PCI bridge to [bus 09-09]
[ 0.912094] pci 0000:05:03.0: bridge window [io 0x3000-0x3fff]
[ 0.915520] pci 0000:05:03.0: bridge window [mem 0xfd600000-0xfd7fffff]
[ 0.918135] pci 0000:05:03.0: bridge window [mem 0xfbc00000-0xfbdfffff 64bit pref]
[ 0.924476] pci 0000:05:04.0: PCI bridge to [bus 0a-0a]
[ 0.925505] pci 0000:05:04.0: bridge window [io 0x2000-0x2fff]
[ 0.929230] pci 0000:05:04.0: bridge window [mem 0xfd400000-0xfd5fffff]
[ 0.931443] pci 0000:05:04.0: bridge window [mem 0xfba00000-0xfbbfffff 64bit pref]
[ 0.935712] pci 0000:05:05.0: PCI bridge to [bus 0b-0b]
[ 0.935725] pci 0000:05:05.0: bridge window [io 0x1000-0x1fff]
[ 0.939153] pci 0000:05:05.0: bridge window [mem 0xfd200000-0xfd3fffff]
[ 0.943067] pci 0000:05:05.0: bridge window [mem 0xfb800000-0xfb9fffff 64bit pref]
[ 0.947390] pci 0000:00:1e.0: PCI bridge to [bus 05-0b]
[ 0.947403] pci 0000:00:1e.0: bridge window [io 0x1000-0x6fff]
[ 0.950524] pci 0000:00:1e.0: bridge window [mem 0xfd200000-0xfdffffff]
[ 0.952767] pci 0000:00:1e.0: bridge window [mem 0xfb800000-0xfc3fffff 64bit pref]
[ 0.962573] pci 0000:00:01.0: setting latency timer to 64
[ 0.965259] pci 0000:00:02.0: setting latency timer to 64
[ 0.968218] pci 0000:00:03.0: setting latency timer to 64
[ 0.972594] pci 0000:00:05.0: setting latency timer to 64
[ 0.976335] pci 0000:00:1e.0: setting latency timer to 64
[ 0.976375] ACPI: PCI Interrupt Link [GSIE] enabled at IRQ 20
[ 0.976402] pci 0000:05:00.0: PCI INT A -> Link[GSIE] -> GSI 20 (level, high) -> IRQ 20
[ 0.979964] pci 0000:05:00.0: setting latency timer to 64
[ 0.979991] ACPI: PCI Interrupt Link [GSIF] enabled at IRQ 21
[ 0.980024] pci 0000:05:01.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21
[ 0.985441] pci 0000:05:01.0: setting latency timer to 64
[ 0.985685] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
[ 0.985704] pci 0000:05:02.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22
[ 0.989866] pci 0000:05:02.0: setting latency timer to 64
[ 0.989891] ACPI: PCI Interrupt Link [GSIH] enabled at IRQ 23
[ 0.989909] pci 0000:05:03.0: PCI INT A -> Link[GSIH] -> GSI 23 (level, high) -> IRQ 23
[ 0.994178] pci 0000:05:03.0: setting latency timer to 64
[ 0.994193] pci 0000:05:04.0: PCI INT A -> Link[GSIE] -> GSI 20 (level, high) -> IRQ 20
[ 0.999002] pci 0000:05:04.0: setting latency timer to 64
[ 1.000885] pci 0000:05:05.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21
[ 1.007087] pci 0000:05:05.0: setting latency timer to 64
[ 1.007098] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.007101] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.007103] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.007105] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[ 1.007107] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 1.007109] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff]
[ 1.007111] pci_bus 0000:01: resource 2 [mem 0xfca00000-0xfcbfffff 64bit pref]
[ 1.007114] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 1.007116] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe5fffff]
[ 1.007118] pci_bus 0000:02: resource 2 [mem 0xfc800000-0xfc9fffff 64bit pref]
[ 1.007120] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
[ 1.007122] pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe3fffff]
[ 1.007124] pci_bus 0000:03: resource 2 [mem 0xfc600000-0xfc7fffff 64bit pref]
[ 1.007127] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 1.007129] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe1fffff]
[ 1.007131] pci_bus 0000:04: resource 2 [mem 0xfc400000-0xfc5fffff 64bit pref]
[ 1.007133] pci_bus 0000:05: resource 0 [io 0x1000-0x6fff]
[ 1.007135] pci_bus 0000:05: resource 1 [mem 0xfd200000-0xfdffffff]
[ 1.007137] pci_bus 0000:05: resource 2 [mem 0xfb800000-0xfc3fffff 64bit pref]
[ 1.007139] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 1.007141] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 1.007143] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.007145] pci_bus 0000:05: resource 7 [mem 0xc0000000-0xfebfffff]
[ 1.007147] pci_bus 0000:06: resource 0 [io 0x6000-0x6fff]
[ 1.007149] pci_bus 0000:06: resource 1 [mem 0xfdc00000-0xfddfffff]
[ 1.007151] pci_bus 0000:06: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
[ 1.007154] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
[ 1.007155] pci_bus 0000:07: resource 1 [mem 0xfda00000-0xfdbfffff]
[ 1.007157] pci_bus 0000:07: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
[ 1.007160] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 1.007162] pci_bus 0000:08: resource 1 [mem 0xfd800000-0xfd9fffff]
[ 1.007164] pci_bus 0000:08: resource 2 [mem 0xfbe00000-0xfbffffff 64bit pref]
[ 1.007166] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
[ 1.007168] pci_bus 0000:09: resource 1 [mem 0xfd600000-0xfd7fffff]
[ 1.007170] pci_bus 0000:09: resource 2 [mem 0xfbc00000-0xfbdfffff 64bit pref]
[ 1.007172] pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
[ 1.007174] pci_bus 0000:0a: resource 1 [mem 0xfd400000-0xfd5fffff]
[ 1.007176] pci_bus 0000:0a: resource 2 [mem 0xfba00000-0xfbbfffff 64bit pref]
[ 1.007178] pci_bus 0000:0b: resource 0 [io 0x1000-0x1fff]
[ 1.007180] pci_bus 0000:0b: resource 1 [mem 0xfd200000-0xfd3fffff]
[ 1.007182] pci_bus 0000:0b: resource 2 [mem 0xfb800000-0xfb9fffff 64bit pref]
[ 1.007463] NET: Registered protocol family 2
[ 1.007971] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.009183] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.010512] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.010597] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.010601] TCP reno registered
[ 1.010621] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.010838] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.010963] NET: Registered protocol family 1
[ 1.012125] pci 0000:00:0b.0: Boot video device
[ 1.012297] PCI: CLS 0 bytes, default 64
[ 1.012333] Unpacking initramfs...
[ 1.097704] Freeing initrd memory: 5836k freed
[ 1.098224] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.098228] Placing 64MB software IO TLB between ffff88007bfd4000 - ffff88007ffd4000
[ 1.098230] software IO TLB at phys 0x7bfd4000 - 0x7ffd4000
[ 1.098507] futex hash table entries: 512 (order: 4, 65536 bytes)
[ 1.098515] Initialise module verification
[ 1.098580] audit: initializing netlink socket (enabled)
[ 1.098588] type=2000 audit(1482315013.092:1): initialized
[ 1.114263] bounce pool size: 64 pages
[ 1.114270] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.115177] VFS: Disk quotas dquot_6.5.2
[ 1.115206] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.115456] msgmni has been set to 5955
[ 1.115590] alg: No test for stdrng (krng)
[ 1.115597] Asymmetric key parser 'x509' registered
[ 1.115619] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.115636] io scheduler noop registered (default)
[ 1.115638] io scheduler deadline registered
[ 1.115658] io scheduler cfq registered
[ 1.115815] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.115980] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.119118] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.119282] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
[ 1.122249] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.122405] pcieport 0000:00:03.0: irq 42 for MSI/MSI-X
[ 1.125292] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.125460] pcieport 0000:00:05.0: irq 43 for MSI/MSI-X
[ 1.130351] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 1.130438] aer 0000:00:02.0:pcie02: service driver aer loaded
[ 1.130522] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 1.130605] aer 0000:00:05.0:pcie02: service driver aer loaded
[ 1.130633] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 1.130636] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.130647] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 1.130670] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.130672] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.130683] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.130704] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 1.130706] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.130717] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 1.130739] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 1.130741] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.130752] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 1.130800] vesafb: mode is 1024x768x24, linelength=3072, pages=2
[ 1.130802] vesafb: scrolling: redraw
[ 1.130804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.130843] vesafb: framebuffer at 0xfa800000, mapped to 0xffffc90012680000, using 4608k, total 8192k
[ 1.130928] bootsplash 3.2.0-2010/03/31: looking for picture...
[ 1.130929] bootsplash: silentjpeg size 59221 bytes
[ 1.136811] bootsplash: ...found (1024x768, 31358 bytes, v3).
[ 1.136860] bootsplash: silentjpeg size 62784 bytes
[ 1.151964] Console: switching to colour frame buffer device 124x44
[ 1.162357] fb0: VESA VGA frame buffer device
[ 1.162391] GHES: HEST is not enabled!
[ 1.162434] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.162606] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.392267] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.428233] Non-volatile memory driver v1.3
[ 1.428236] Linux agpgart interface v0.103
[ 1.428281] Fixed MDIO Bus: probed
[ 1.428310] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.428763] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.428769] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.428803] mousedev: PS/2 mouse device common for all mice
[ 1.428949] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.429239] cpuidle: using governor ladder
[ 1.429241] cpuidle: using governor menu
[ 1.429270] EFI Variables Facility v0.08 2004-May-17
[ 1.429403] TCP cubic registered
[ 1.429433] Registering the dns_resolver key type
[ 1.429502] Loading module verification certificates
[ 1.429540] MODSIGN: Loaded cert 'SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7'
[ 1.429572] MODSIGN: Loaded cert 'SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7'
[ 1.429596] PM: Checking hibernation image partition /dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part5
[ 1.429598] PM: Hibernation image not present or could not be loaded.
[ 1.429606] registered taskstats version 1
[ 1.430607] Magic number: 12:397:176
[ 1.430656] acpi device:0c: hash matches
[ 1.431880] Freeing unused kernel memory: 1360k freed
[ 1.432039] Write protecting the kernel read-only data: 10240k
[ 1.434365] Freeing unused kernel memory: 1560k freed
[ 1.435933] Freeing unused kernel memory: 900k freed
[ 1.463108] SCSI subsystem initialized
[ 1.463624] megasas: 06.806.08.00-rc1 Thu. Sep. 4 17:00:00 PDT 2014
[ 1.463660] megasas: 0x1000:0x0079:0x1000:0x9261: bus 0:slot 6:func 0
[ 1.463717] megaraid_sas 0000:00:06.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22
[ 1.463754] megaraid_sas 0000:00:06.0: setting latency timer to 64
[ 1.464054] megasas: FW now in Ready state
[ 1.464204] megaraid_sas 0000:00:06.0: irq 44 for MSI/MSI-X
[ 1.464239] megaraid_sas 0000:00:06.0: [scsi0]: FW supports<0> MSIX vector,Online CPUs: <2>,Current MSIX <1>
[ 1.464735] megasas_init_mfi: fw_support_ieee=67108864
[ 1.464738] megasas: INIT adapter done
[ 1.464826] megaraid_sas 0000:00:06.0: Controller type: MR,Memory size is: 512MB
[ 1.464885] scsi0 : LSI SAS based MegaRAID driver
[ 1.466549] scsi 0:2:0:0: Direct-Access FTS PRAID EP420i 4.25 PQ: 0 ANSI: 5
[ 1.475523] libata version 3.00 loaded.
[ 1.475942] ahci 0000:00:1f.2: version 3.0
[ 1.475984] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
[ 1.476034] ahci 0000:00:1f.2: PCI INT A -> Link[GSIA] -> GSI 16 (level, high) -> IRQ 16
[ 1.476154] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.476385] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[ 1.476414] ahci 0000:00:1f.2: flags: ncq only
[ 1.476463] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.476990] scsi1 : ahci
[ 1.477072] scsi2 : ahci
[ 1.477135] scsi3 : ahci
[ 1.477196] scsi4 : ahci
[ 1.477256] scsi5 : ahci
[ 1.477312] scsi6 : ahci
[ 1.477367] ata2: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35100 irq 45
[ 1.477398] ata3: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35180 irq 45
[ 1.477429] ata4: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35200 irq 45
[ 1.477458] ata5: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35280 irq 45
[ 1.477488] ata6: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35300 irq 45
[ 1.477517] ata7: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35380 irq 45
[ 1.796097] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.796260] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.796363] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.796461] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.796567] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.796616] ata4.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.796645] ata4.00: applying bridge limits
[ 1.796814] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.796933] ata4.00: configured for UDMA/100
[ 1.797100] scsi 3:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.801016] sym53c8xx 0000:02:00.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22
[ 1.801996] sym0: <895a> rev 0x0 at pci 0000:02:00.0 irq 22
[ 1.804128] sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
[ 1.808004] sym0: SCSI BUS has been reset.
[ 1.812118] scsi7 : sym-2.2.3
[ 2.068643] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
[ 2.112101] Refined TSC clocksource calibration: 2594.052 MHz.
[ 4.817405] virtio-pci 0000:01:00.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21
[ 4.817478] virtio-pci 0000:01:00.0: setting latency timer to 64
[ 4.817661] virtio-pci 0000:03:00.0: PCI INT A -> Link[GSIH] -> GSI 23 (level, high) -> IRQ 23
[ 4.821655] virtio-pci 0000:03:00.0: setting latency timer to 64
[ 4.821759] virtio-pci 0000:04:00.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21
[ 4.825775] virtio-pci 0000:04:00.0: setting latency timer to 64
[ 4.829969] alua: device handler registered
[ 4.833339] rdac: device handler registered
[ 4.836626] emc: device handler registered
[ 4.839934] hp_sw: device handler registered
[ 4.842360] udev: starting version 147
[ 4.873682] ACPI: acpi_idle registered with cpuidle
[ 4.880289] sd 0:2:0:0: [sda] 629145600 512-byte logical blocks: (322 GB/300 GiB)
[ 4.880418] sd 0:2:0:0: [sda] Write Protect is off
[ 4.880447] sd 0:2:0:0: [sda] Mode Sense: 63 00 00 08
[ 4.880481] sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.910195] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 4.910559] sd 0:2:0:0: [sda] Attached SCSI disk
[ 6.920272] kjournald starting. Commit interval 15 seconds
[ 6.920385] EXT3-fs (sda7): using internal journal
[ 6.920418] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 15.584838] udev: starting version 147
[ 16.806942] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 16.807001] ACPI: Power Button [PWRF]
[ 17.086736] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 17.177774] iTCO_vendor_support: vendor-support=0
[ 17.215722] rtc_cmos 00:01: RTC can wake from S4
[ 17.215878] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 17.216069] rtc0: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[ 17.217618] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.219668] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.220924] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 17.221083] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
[ 17.221159] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.445163] virtio-pci 0000:03:00.0: irq 46 for MSI/MSI-X
[ 17.445175] virtio-pci 0000:03:00.0: irq 47 for MSI/MSI-X
[ 17.505757] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 17.505789] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 17.505848] e1000 0000:00:04.0: PCI INT A -> Link[GSIE] -> GSI 20 (level, high) -> IRQ 20
[ 17.509079] e1000 0000:00:04.0: setting latency timer to 64
[ 17.523187] virtio-pci 0000:01:00.0: irq 48 for MSI/MSI-X
[ 17.523199] virtio-pci 0000:01:00.0: irq 49 for MSI/MSI-X
[ 17.523209] virtio-pci 0000:01:00.0: irq 50 for MSI/MSI-X
[ 17.523219] virtio-pci 0000:01:00.0: irq 51 for MSI/MSI-X
[ 17.523626] scsi8 : Virtio SCSI HBA
[ 17.524618] scsi 8:0:2:5: Sequential-Access HP Ultrium 6-SCSI 23AB PQ: 0 ANSI: 5
[ 17.524913] scsi 8:0:2:4: Sequential-Access HP Ultrium 6-SCSI 23AB PQ: 0 ANSI: 5
[ 17.525190] scsi 8:0:2:3: Sequential-Access HP Ultrium 5-SCSI 0001 PQ: 0 ANSI: 5
[ 17.525448] scsi 8:0:2:2: Sequential-Access HP Ultrium 5-SCSI 0001 PQ: 0 ANSI: 5
[ 17.525707] scsi 8:0:2:1: Sequential-Access HP Ultrium 5-SCSI 0001 PQ: 0 ANSI: 5
[ 17.694117] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 17.694150] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 17.694246] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 17.696178] sd 0:2:0:0: Attached scsi generic sg0 type 0
[ 17.696223] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 17.696264] scsi 8:0:2:5: Attached scsi generic sg2 type 1
[ 17.696303] scsi 8:0:2:4: Attached scsi generic sg3 type 1
[ 17.696341] scsi 8:0:2:3: Attached scsi generic sg4 type 1
[ 17.696386] scsi 8:0:2:2: Attached scsi generic sg5 type 1
[ 17.696424] scsi 8:0:2:1: Attached scsi generic sg6 type 1
[ 17.825189] e1000 0000:00:04.0: eth0: (PCI:33MHz:32-bit) 00:82:67:84:01:01
[ 17.825251] e1000 0000:00:04.0: eth0: Intel(R) PRO/1000 Network Connection
[ 17.825339] e1000 0000:00:10.0: PCI INT A -> Link[GSIE] -> GSI 20 (level, high) -> IRQ 20
[ 17.829441] e1000 0000:00:10.0: setting latency timer to 64
[ 18.013995] osst :I: Tape driver with OnStream support version 0.99.4
[ 18.013996] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 18.143843] e1000 0000:00:10.0: eth1: (PCI:33MHz:32-bit) 00:82:67:84:01:02
[ 18.143872] e1000 0000:00:10.0: eth1: Intel(R) PRO/1000 Network Connection
[ 18.143938] e1000 0000:00:11.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21
[ 18.147050] e1000 0000:00:11.0: setting latency timer to 64
[ 18.462674] e1000 0000:00:11.0: eth2: (PCI:33MHz:32-bit) 00:fc:61:69:00:01
[ 18.462707] e1000 0000:00:11.0: eth2: Intel(R) PRO/1000 Network Connection
[ 18.462771] e1000 0000:00:12.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22
[ 18.465913] e1000 0000:00:12.0: setting latency timer to 64
[ 18.511555] Disabling lock debugging due to kernel taint
[ 18.511825] st: Version 20110511, fixed bufsize 32768, s/g segs 256
[ 18.511966] st 8:0:2:5: Attached scsi tape st0
[ 18.512014] st 8:0:2:5: st0: try direct i/o: yes (alignment 4 B)
[ 18.512121] st 8:0:2:4: Attached scsi tape st1
[ 18.512146] st 8:0:2:4: st1: try direct i/o: yes (alignment 4 B)
[ 18.512248] st 8:0:2:3: Attached scsi tape st2
[ 18.512273] st 8:0:2:3: st2: try direct i/o: yes (alignment 4 B)
[ 18.512375] st 8:0:2:2: Attached scsi tape st3
[ 18.512400] st 8:0:2:2: st3: try direct i/o: yes (alignment 4 B)
[ 18.512504] st 8:0:2:1: Attached scsi tape st4
[ 18.512529] st 8:0:2:1: st4: try direct i/o: yes (alignment 4 B)
[ 18.776302] e1000 0000:00:12.0: eth3: (PCI:33MHz:32-bit) 00:fc:61:69:00:02
[ 18.776337] e1000 0000:00:12.0: eth3: Intel(R) PRO/1000 Network Connection
[ 18.776405] e1000 0000:00:13.0: PCI INT A -> Link[GSIH] -> GSI 23 (level, high) -> IRQ 23
[ 18.780058] e1000 0000:00:13.0: setting latency timer to 64
[ 19.095319] e1000 0000:00:13.0: eth4: (PCI:33MHz:32-bit) 00:fc:61:69:00:05
[ 19.095366] e1000 0000:00:13.0: eth4: Intel(R) PRO/1000 Network Connection
[ 19.095453] e1000 0000:08:01.0: PCI INT A -> Link[GSIH] -> GSI 23 (level, high) -> IRQ 23
[ 19.095463] i801_smbus 0000:00:1f.3: PCI INT A -> Link[GSIA] -> GSI 16 (level, high) -> IRQ 16
[ 19.099313] e1000 0000:08:01.0: setting latency timer to 64
[ 19.411991] e1000 0000:08:01.0: eth5: (PCI:33MHz:32-bit) 00:86:67:84:01:06
[ 19.412049] e1000 0000:08:01.0: eth5: Intel(R) PRO/1000 Network Connection
[ 19.412109] e1000 0000:0a:01.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21
[ 19.415932] e1000 0000:0a:01.0: setting latency timer to 64
[ 19.728016] e1000 0000:0a:01.0: eth6: (PCI:33MHz:32-bit) 00:82:67:84:01:04
[ 19.728054] e1000 0000:0a:01.0: eth6: Intel(R) PRO/1000 Network Connection
[ 19.728111] e1000 0000:0b:01.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22
[ 19.732396] e1000 0000:0b:01.0: setting latency timer to 64
[ 20.043914] e1000 0000:0b:01.0: eth7: (PCI:33MHz:32-bit) 00:82:67:84:01:05
[ 20.043945] e1000 0000:0b:01.0: eth7: Intel(R) PRO/1000 Network Connection
[ 20.133906] Adding 12585980k swap on /dev/sda5. Priority:-1 extents:1 across:12585980k
[ 20.483489] type=1111 audit(1482315032.480:2): user pid=1029 uid=0 auid=4294967295 ses=4294967295 msg='changing system time: exe="/sbin/hwclock" (hostname=?, addr=?, terminal=console res=success)'
[ 20.512821] device-mapper: uevent: version 1.0.3
[ 20.512909] device-mapper: ioctl: 4.25.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 20.573217] pps_core: LinuxPPS API ver. 1 registered
[ 20.573250] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 20.573671] PTP clock support registered
[ 22.173232] loop: module loaded
[ 22.567651] kjournald starting. Commit interval 15 seconds
[ 22.567799] EXT3-fs (sda6): using internal journal
[ 22.567831] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 25.707938] fuse init (API version 7.16)
[ 28.470827] ipmi message handler version 39.2
[ 28.478390] ipmi device interface
[ 28.480175] IPMI System Interface driver.
[ 28.480196] ipmi_si: probing via SMBIOS
[ 28.480198] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 28.480200] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 28.480203] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 28.480216] ipmi_si: Interface detection failed
[ 50.826472] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 51.208985] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 51.214329] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 51.239140] type=1325 audit(1482315063.236:3): table=filter family=2 entries=0
[ 51.239344] type=1300 audit(1482315063.236:3): arch=c000003e syscall=175 success=yes exit=0 a0=7fc2e7110000 a1=1ea7 a2=61e440 a3=7fffd86f1450 items=0 ppid=1838 pid=1839 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/sbin/modprobe" key=(null)
[ 51.266801] type=1325 audit(1482315063.260:4): table=raw family=2 entries=0
[ 51.267095] type=1300 audit(1482315063.260:4): arch=c000003e syscall=175 success=yes exit=0 a0=7efc422a1000 a1=1a1f a2=61e440 a3=7fff6ce4cdb0 items=0 ppid=1844 pid=1845 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/sbin/modprobe" key=(null)
[ 51.293522] type=1325 audit(1482315063.288:5): table=filter family=2 entries=4
[ 51.293532] type=1300 audit(1482315063.288:5): arch=c000003e syscall=54 success=yes exit=0 a0=5 a1=0 a2=40 a3=60fa90 items=0 ppid=1810 pid=1837 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-batch" exe="/usr/sbin/iptables-batch" key=(null)
[ 51.294670] type=1325 audit(1482315063.288:6): table=raw family=2 entries=3
[ 51.294680] type=1300 audit(1482315063.288:6): arch=c000003e syscall=54 success=yes exit=0 a0=7 a1=0 a2=40 a3=60b320 items=0 ppid=1810 pid=1837 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-batch" exe="/usr/sbin/iptables-batch" key=(null)
[ 75.445434] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 75.648765] device eth2 entered promiscuous mode
[ 75.648771] type=1700 audit(1482315087.640:7): dev=eth2 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[ 75.650085] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 75.651762] type=1300 audit(1482315087.640:7): arch=c000003e syscall=46 success=yes exit=32 a0=3 a1=7ffe0dee6da0 a2=0 a3=7ffe0dee6b10 items=0 ppid=3782 pid=3960 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip" exe="/sbin/ip" key=(null)
[ 75.821745] device eth3 entered promiscuous mode
[ 75.821750] type=1700 audit(1482315087.812:8): dev=eth3 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[ 75.823481] type=1300 audit(1482315087.812:8): arch=c000003e syscall=46 success=yes exit=32 a0=3 a1=7ffdcda3c8a0 a2=0 a3=7ffdcda3c610 items=0 ppid=4013 pid=4191 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip" exe="/sbin/ip" key=(null)
[ 75.825441] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 75.983641] device eth4 entered promiscuous mode
[ 75.983647] type=1700 audit(1482315087.976:9): dev=eth4 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[ 75.985424] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 75.986851] type=1300 audit(1482315087.976:9): arch=c000003e syscall=46 success=yes exit=32 a0=3 a1=7ffcea7f6a70 a2=0 a3=7ffcea7f67e0 items=0 ppid=4244 pid=4422 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip" exe="/sbin/ip" key=(null)
[ 77.328187] 802.1Q VLAN Support v1.8
[ 77.328200] 8021q: adding VLAN 0 to HW filter on device eth0
[ 77.328276] 8021q: adding VLAN 0 to HW filter on device eth2
[ 77.328349] 8021q: adding VLAN 0 to HW filter on device eth3
[ 77.328384] 8021q: adding VLAN 0 to HW filter on device eth4
[ 77.330204] NET: Registered protocol family 17
[ 77.532547] scsi9 : FCoE Driver
[ 77.532688] fcoe: No FDMI support.
[ 77.532818] host9: libfc: Link up on port (000000)
[ 77.534158] scsi10 : FCoE Driver
[ 77.534296] fcoe: No FDMI support.
[ 77.534375] host10: libfc: Link up on port (000000)
[ 77.535633] scsi11 : FCoE Driver
[ 77.535772] fcoe: No FDMI support.
[ 77.535852] host11: libfc: Link up on port (000000)
[ 78.052601] host11: Assigned Port ID 000002
[ 78.080543] host10: Assigned Port ID 000001
[ 78.112603] host9: Assigned Port ID 000005
[ 81.132045] scsi 10:0:0:0: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 81.132156] sd 10:0:0:0: Attached scsi generic sg7 type 0
[ 81.133259] sd 10:0:0:0: [sdb] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 81.133403] scsi 10:0:0:7: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 81.133478] sd 10:0:0:7: Attached scsi generic sg8 type 0
[ 81.134151] sd 10:0:0:7: [sdc] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 81.134279] scsi 10:0:0:6: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 81.134396] sd 10:0:0:6: Attached scsi generic sg9 type 0
[ 81.134871] sd 10:0:0:0: [sdb] Write Protect is off
[ 81.134875] sd 10:0:0:0: [sdb] Mode Sense: 69 00 00 08
[ 81.135425] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 81.135562] sd 10:0:0:7: [sdc] Write Protect is off
[ 81.135566] sd 10:0:0:7: [sdc] Mode Sense: 69 00 00 08
[ 81.135586] sd 10:0:0:6: [sdd] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 81.136114] scsi 10:0:0:5: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 81.136125] sd 10:0:0:7: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 81.136228] sd 10:0:0:5: Attached scsi generic sg10 type 0
[ 81.136966] sd 10:0:0:6: [sdd] Write Protect is off
[ 81.136970] sd 10:0:0:6: [sdd] Mode Sense: 69 00 00 08
[ 81.137139] scsi 10:0:0:4: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 81.137237] sd 10:0:0:4: Attached scsi generic sg11 type 0
[ 81.137409] sd 10:0:0:5: [sde] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 81.137723] sd 10:0:0:6: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 81.139115] scsi 10:0:0:3: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 81.139214] sd 10:0:0:3: Attached scsi generic sg12 type 0
[ 81.139961] sd 10:0:0:5: [sde] Write Protect is off
[ 81.139966] sd 10:0:0:5: [sde] Mode Sense: 69 00 00 08
[ 81.140040] scsi 10:0:0:2: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 81.140140] sd 10:0:0:2: Attached scsi generic sg13 type 0
[ 81.141186] sd 10:0:0:5: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 81.141377] scsi 10:0:0:15: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 81.141476] sd 10:0:0:15: Attached scsi generic sg14 type 0
[ 81.142989] sd 10:0:0:4: [sdf] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 81.143224] sdb: sdb1
[ 81.144462] sdc: sdc1
[ 81.145161] sd 10:0:0:4: [sdf] Write Protect is off
[ 81.145165] sd 10:0:0:4: [sdf] Mode Sense: 69 00 00 08
[ 81.145604] sdd: sdd1
[ 81.146596] sd 10:0:0:4: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 81.146747] sd 10:0:0:3: [sdg] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 81.146775] sd 10:0:0:0: [sdb] Attached SCSI disk
[ 81.147745] sd 10:0:0:7: [sdc] Attached SCSI disk
[ 81.148132] sd 10:0:0:2: [sdh] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 81.148451] sd 10:0:0:3: [sdg] Write Protect is off
[ 81.148455] sd 10:0:0:3: [sdg] Mode Sense: 69 00 00 08
[ 81.148671] sd 10:0:0:15: [sdi] 268435456 512-byte logical blocks: (137 GB/128 GiB)
[ 81.149135] sd 10:0:0:3: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 81.149535] sd 10:0:0:2: [sdh] Write Protect is off
[ 81.149539] sd 10:0:0:2: [sdh] Mode Sense: 69 00 00 08
[ 81.149557] sd 10:0:0:6: [sdd] Attached SCSI disk
[ 81.149823] sd 10:0:0:15: [sdi] Write Protect is off
[ 81.149827] sd 10:0:0:15: [sdi] Mode Sense: 69 00 00 08
[ 81.150220] sde: sde1
[ 81.150397] sd 10:0:0:2: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 81.150543] sd 10:0:0:15: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 81.152696] sd 10:0:0:5: [sde] Attached SCSI disk
[ 81.153696] sdi: sdi1 sdi2
[ 81.155018] sdf: sdf1
[ 81.156046] sdg: sdg1
[ 81.156625] sd 10:0:0:15: [sdi] Attached SCSI disk
[ 81.157323] sdh: sdh1
[ 81.157476] sd 10:0:0:4: [sdf] Attached SCSI disk
[ 81.159273] sd 10:0:0:3: [sdg] Attached SCSI disk
[ 81.160147] sd 10:0:0:2: [sdh] Attached SCSI disk
[ 93.185554] scsi 11:0:1:0: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 93.185690] sd 11:0:1:0: Attached scsi generic sg15 type 0
[ 93.186866] scsi 11:0:1:7: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 93.186958] sd 11:0:1:7: Attached scsi generic sg16 type 0
[ 93.187029] sd 11:0:1:0: [sdj] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 93.187513] scsi 11:0:1:6: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 93.187594] sd 11:0:1:6: Attached scsi generic sg17 type 0
[ 93.187797] sd 11:0:1:7: [sdk] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 93.188254] scsi 11:0:1:5: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 93.188335] sd 11:0:1:5: Attached scsi generic sg18 type 0
[ 93.188559] sd 11:0:1:0: [sdj] Write Protect is off
[ 93.188563] sd 11:0:1:0: [sdj] Mode Sense: 69 00 00 08
[ 93.188575] sd 11:0:1:6: [sdl] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 93.189030] scsi 11:0:1:4: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 93.189158] sd 11:0:1:4: Attached scsi generic sg19 type 0
[ 93.189559] sd 11:0:1:7: [sdk] Write Protect is off
[ 93.189563] sd 11:0:1:7: [sdk] Mode Sense: 69 00 00 08
[ 93.189778] sd 11:0:1:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 93.190242] sd 11:0:1:7: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 93.190581] sd 11:0:1:5: [sdm] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 93.190593] scsi 11:0:1:3: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 93.190679] sd 11:0:1:3: Attached scsi generic sg20 type 0
[ 93.191534] sd 11:0:1:6: [sdl] Write Protect is off
[ 93.191538] sd 11:0:1:6: [sdl] Mode Sense: 69 00 00 08
[ 93.191564] sd 11:0:1:4: [sdn] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 93.191663] scsi 11:0:1:2: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 93.191742] sd 11:0:1:2: Attached scsi generic sg21 type 0
[ 93.192079] sd 11:0:1:5: [sdm] Write Protect is off
[ 93.192083] sd 11:0:1:5: [sdm] Mode Sense: 69 00 00 08
[ 93.192402] sd 11:0:1:6: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 93.192672] scsi 11:0:1:15: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 93.192754] sd 11:0:1:15: Attached scsi generic sg22 type 0
[ 93.192939] sd 11:0:1:5: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 93.193086] sd 11:0:1:4: [sdn] Write Protect is off
[ 93.193090] sd 11:0:1:4: [sdn] Mode Sense: 69 00 00 08
[ 93.193768] sd 11:0:1:4: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 93.194166] sd 11:0:1:3: [sdo] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 93.196035] sd 11:0:1:3: [sdo] Write Protect is off
[ 93.196040] sd 11:0:1:3: [sdo] Mode Sense: 69 00 00 08
[ 93.196677] sd 11:0:1:2: [sdp] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 93.196951] sd 11:0:1:3: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 93.198547] sdk: sdk1
[ 93.198680] sd 11:0:1:2: [sdp] Write Protect is off
[ 93.198684] sd 11:0:1:2: [sdp] Mode Sense: 69 00 00 08
[ 93.200247] sd 11:0:1:2: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 93.201373] sdj: sdj1
[ 93.202162] sd 11:0:1:15: [sdq] 268435456 512-byte logical blocks: (137 GB/128 GiB)
[ 93.202811] sd 11:0:1:7: [sdk] Attached SCSI disk
[ 93.203804] sdm: sdm1
[ 93.204079] sdl: sdl1
[ 93.204260] sd 11:0:1:15: [sdq] Write Protect is off
[ 93.204264] sd 11:0:1:15: [sdq] Mode Sense: 69 00 00 08
[ 93.205413] sd 11:0:1:15: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 93.206188] sdn: sdn1
[ 93.206733] sd 11:0:1:0: [sdj] Attached SCSI disk
[ 93.207435] sdo: sdo1
[ 93.208232] sd 11:0:1:6: [sdl] Attached SCSI disk
[ 93.208393] sd 11:0:1:5: [sdm] Attached SCSI disk
[ 93.209666] sdq: sdq1 sdq2
[ 93.209915] sdp: sdp1
[ 93.210554] sd 11:0:1:3: [sdo] Attached SCSI disk
[ 93.211224] sd 11:0:1:4: [sdn] Attached SCSI disk
[ 93.213350] sd 11:0:1:15: [sdq] Attached SCSI disk
[ 93.213450] sd 11:0:1:2: [sdp] Attached SCSI disk
[ 95.981911] type=1305 audit(1482315107.980:10): audit_pid=5513 old=0 auid=4294967295 ses=4294967295 res=1
[ 108.021320] RPC: Registered named UNIX socket transport module.
[ 108.021321] RPC: Registered udp transport module.
[ 108.021322] RPC: Registered tcp transport module.
[ 108.021323] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 108.056519] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 108.736177] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 108.736429] NFSD: starting 90-second grace period
[ 110.346242] Fusion MPT base driver 4.28.00.01suse
[ 110.346244] Copyright (c) 1999-2010 LSI Corporation
[ 110.347304] Fusion MPT misc device (ioctl) driver 4.28.00.01suse
[ 110.347334] mptctl: Registered with Fusion MPT base driver
[ 110.347336] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 128.184307] st0: Block limits 4 - 1048576 bytes.
[ 128.184891] st1: Block limits 4 - 1048576 bytes.
[ 128.186614] st2: Block limits 4 - 1048576 bytes.
[ 128.187098] st3: Block limits 4 - 1048576 bytes.
[ 128.187589] st4: Block limits 4 - 1048576 bytes.
[ 134.812165] st: Unloaded.
[ 136.915083] st: Version 20110511, fixed bufsize 32768, s/g segs 256
[ 136.915206] st 8:0:2:5: Attached scsi tape st0
[ 136.915207] st 8:0:2:5: st0: try direct i/o: yes (alignment 4 B)
[ 136.915297] st 8:0:2:4: Attached scsi tape st1
[ 136.915298] st 8:0:2:4: st1: try direct i/o: yes (alignment 4 B)
[ 136.915388] st 8:0:2:3: Attached scsi tape st2
[ 136.915389] st 8:0:2:3: st2: try direct i/o: yes (alignment 4 B)
[ 136.915480] st 8:0:2:2: Attached scsi tape st3
[ 136.915481] st 8:0:2:2: st3: try direct i/o: yes (alignment 4 B)
[ 136.915570] st 8:0:2:1: Attached scsi tape st4
[ 136.915571] st 8:0:2:1: st4: try direct i/o: yes (alignment 4 B)
[ 136.938347] licDriver: module loaded (major: 245)
[ 139.272516] device-mapper: multipath: version 1.6.0 loaded
[ 139.663173] device-mapper: multipath service-time: version 0.2.0 loaded
[ 164.197569] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 203.855452] Emulex LightPulse Fibre Channel SCSI driver 10.6.193.12.6fts
[ 203.855454] Copyright(c) 2004-2015 Emulex. All rights reserved.
[ 203.878824] trc_m: kernel trace driver, version 0.0.1, numeric time zone 01 (1)
[ 205.678380] fct4: ---vvv------------------ fct4_init ------------------vvv---
[ 205.678652] fct4: Fibre Channel SLI4 series SCSI target-mode low level driver 0.0.3
[ 205.678654] fct4: Copyright(c) 2004-2015 Emulex. All rights reserved.
[ 205.678655] fct4: Copyright(c) 2013-2015 Fujitsu Technology Solutions.
[ 205.678656] fct4: operation mode selected: fcp_initiator [ fcp_target ] ficon
[ 255.690797] st0: Block limits 4 - 1048576 bytes.
[ 255.691163] st1: Block limits 4 - 1048576 bytes.
[ 255.691492] st2: Block limits 4 - 1048576 bytes.
[ 255.691816] st3: Block limits 4 - 1048576 bytes.
[ 255.692148] st4: Block limits 4 - 1048576 bytes.
[ 348.819335] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 348.820183] bonding: SLAN00 is being created...
[ 348.820854] bonding: SLAN00: Setting MII monitoring interval to 100.
[ 348.822274] bonding: SLAN00: Setting up delay to 30000.
[ 348.822642] bonding: SLAN00: setting mode to active-backup (1).
[ 348.829327] bonding: SLAN00: Adding slave eth5.
[ 348.832784] 8021q: adding VLAN 0 to HW filter on device eth5
[ 348.832847] bonding: SLAN00: enslaving eth5 as a backup interface with a down link.
[ 348.833590] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 348.881372] bonding: SLAN00: link status up for interface eth5, enabling it in 0 ms.
[ 348.882105] 8021q: adding VLAN 0 to HW filter on device SLAN00
[ 348.885120] bonding: SLAN00: link status definitely up for interface eth5, 1000 Mbps full duplex.
[ 348.885122] bonding: SLAN00: making interface eth5 the new active one.
[ 348.885628] bonding: SLAN00: first active interface up!
[ 349.625395] 8021q: adding VLAN 0 to HW filter on device eth1
[ 351.628467] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 352.415719] 8021q: adding VLAN 0 to HW filter on device eth6
[ 354.420657] e1000: eth6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 355.175484] 8021q: adding VLAN 0 to HW filter on device eth7
[ 357.180512] e1000: eth7 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 385.572635] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36632 PROTO=2
[ 514.220441] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36633 PROTO=2
[ 523.456757] e1000: eth7 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 555.564071] stg4: Fibre Channel SLI4 series SCSI target-mode emulation interface driver 0.0.1
[ 602.838775] bootsplash: status on console 0 changed to on
[ 642.866544] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36634 PROTO=2
[-- Attachment #3: dmesg-2.8.0.txt --]
[-- Type: text/plain, Size: 74283 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.101-80-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Fri Jul 15 14:30:41 UTC 2016 (eb2ba81)
[ 0.000000] Command line: root=/dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part7 linux_x86_64 nmi_watchdog=0 resume=/dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part5 splash=silent audit=1 vga=0x318 crashkernel=128M@64M tsc=reliable elevator=noop
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffdf000 (usable)
[ 0.000000] BIOS-e820: 000000007ffdf000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000380000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.8 present.
[ 0.000000] DMI: FUJITSU PRIMERGY RX300 S8/D2939-B1, BIOS V4.6.5.4 R1.14.0 for D2939-B1x 10/13/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x380000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] last_pfn = 0x7ffdf max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6ad0] f6ad0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ffdf000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ffdf000 page 4k
[ 0.000000] kernel direct mapping tables up to 0x7ffdefff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] init_memory_mapping: 0000000100000000-0000000380000000
[ 0.000000] 0100000000 - 0380000000 page 2M
[ 0.000000] kernel direct mapping tables up to 0x37fffffff @ [mem 0x7ffd4000-0x7ffdefff]
[ 0.000000] nmi ring buffer: 262144
[ 0.000000] RAMDISK: 37a51000 - 37ff0000
[ 0.000000] Reserving 128MB of memory at 64MB for crashkernel (System RAM: 14336MB)
[ 0.000000] ACPI: RSDP 00000000000f6a80 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000007ffe20b7 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000007ffe1f4f 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000007ffdfc00 0234F (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 000000007ffdfbc0 00040
[ 0.000000] ACPI: APIC 000000007ffe1fc3 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000007ffe2043 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: MCFG 000000007ffe207b 0003C (v01 BOCHS BXPCMCFG 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000380000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000380000000
[ 0.000000] NODE_DATA [000000037ff99000 - 000000037ffbffff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1bef801, boot clock
[ 0.000000] [ffffea0000000000-ffffea000c3fffff] PMD -> [ffff880373600000-ffff88037ddfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00380000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ffdf
[ 0.000000] 0: 0x00100000 -> 0x00380000
[ 0.000000] On node 0 totalpages: 3145582
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 505879 pages, LIFO batch:31
[ 0.000000] Normal zone: 35840 pages used for memmap
[ 0.000000] Normal zone: 2585600 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007ffdf000 - 0000000080000000
[ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000b0000000
[ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000feffc000
[ 0.000000] PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
[ 0.000000] PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ed1c000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88037fc00000 s71680 r8192 d22528 u1048576
[ 0.000000] pcpu-alloc: s71680 r8192 d22528 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] kvm-clock: cpu 0, msr 3:7fc10801, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095401
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part7 linux_x86_64 nmi_watchdog=0 resume=/dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part5 splash=silent audit=1 vga=0x318 crashkernel=128M@64M tsc=reliable elevator=noop
[ 0.000000] bootsplash: silent mode.
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 12190176k/14680064k available (4566k kernel code, 2097736k absent, 392152k reserved, 7581k data, 1360k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:262400 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 100663296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Detected 2594.014 MHz processor.
[ 0.008000] Calibrating delay loop (skipped) preset value.. 5188.02 BogoMIPS (lpj=10376056)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.008000] Security Framework initialized
[ 0.008000] AppArmor: AppArmor initialized
[ 0.008000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.008210] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009498] Mount-cache hash table entries: 256
[ 0.009584] Initializing cgroup subsys cpuacct
[ 0.009587] Initializing cgroup subsys memory
[ 0.009594] Initializing cgroup subsys devices
[ 0.009596] Initializing cgroup subsys freezer
[ 0.009597] Initializing cgroup subsys net_cls
[ 0.009599] Initializing cgroup subsys blkio
[ 0.009602] Initializing cgroup subsys perf_event
[ 0.009659] CPU: Physical Processor ID: 0
[ 0.009669] mce: CPU supports 10 MCE banks
[ 0.011306] ACPI: Core revision 20110413
[ 0.012226] Enabling x2apic
[ 0.012233] Enabled x2apic
[ 0.012441] Switched APIC routing to physical x2apic.
[ 0.013212] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.013214] CPU0: Intel QEMU Virtual CPU version 2.5+ stepping 03
[ 0.016000] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.016000] Failed to access perfctr msr (MSR c1 is 0)
[ 0.016000] Booting Node 0, Processors #1 Ok.
[ 0.024005] kvm-clock: cpu 1, msr 3:7fd10801, secondary cpu clock
[ 0.024017] Brought up 2 CPUs
[ 0.024015] KVM setup async PF for cpu 1
[ 0.024023] Total of 2 processors activated (10376.05 BogoMIPS).
[ 0.024342] devtmpfs: initialized
[ 0.030473] print_constraints: dummy:
[ 0.030473] Time: 6:44:40 Date: 12/21/16
[ 0.030473] NET: Registered protocol family 16
[ 0.030473] ACPI: bus type pci registered
[ 0.030473] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[ 0.030473] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[ 0.033065] PCI: Using configuration type 1 for base access
[ 0.033712] bio: create slab <bio-0> at 0
[ 0.033712] ACPI: EC: Look up EC in DSDT
[ 0.040191] ACPI: Interpreter enabled
[ 0.040196] ACPI: (supports S0 S3 S4 S5)
[ 0.040214] ACPI: Using IOAPIC for interrupt routing
[ 0.042725] ACPI: No dock devices found.
[ 0.042730] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.042800] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.042837] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.042840] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.042843] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.042846] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.042883] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[ 0.043215] pci 0000:00:01.0: [8086:3420] type 1 class 0x000604
[ 0.052442] pci 0000:00:02.0: [8086:3420] type 1 class 0x000604
[ 0.062689] pci 0000:00:03.0: [8086:3420] type 1 class 0x000604
[ 0.069744] pci 0000:00:04.0: [8086:100f] type 0 class 0x000200
[ 0.073449] pci 0000:00:04.0: reg 10: [mem 0xfe980000-0xfe99ffff]
[ 0.080033] pci 0000:00:04.0: reg 14: [io 0xb100-0xb13f]
[ 0.113881] pci 0000:00:04.0: reg 30: [mem 0xfe800000-0xfe83ffff pref]
[ 0.116119] pci 0000:00:05.0: [8086:3420] type 1 class 0x000604
[ 0.122206] pci 0000:00:06.0: [1000:0079] type 0 class 0x000104
[ 0.125627] pci 0000:00:06.0: reg 10: [io 0xb000-0xb0ff]
[ 0.132047] pci 0000:00:06.0: reg 14: [mem 0xfea30000-0xfea33fff 64bit]
[ 0.140037] pci 0000:00:06.0: reg 1c: [mem 0xfe840000-0xfe87ffff 64bit]
[ 0.154913] pci 0000:00:0b.0: [1af4:1050] type 0 class 0x000300
[ 0.156036] pci 0000:00:0b.0: reg 10: [mem 0xfb000000-0xfb7fffff pref]
[ 0.170655] pci 0000:00:0b.0: reg 18: [mem 0xfcc00000-0xfcc03fff 64bit pref]
[ 0.177541] pci 0000:00:0b.0: reg 20: [mem 0xfea34000-0xfea34fff]
[ 0.189638] pci 0000:00:0b.0: reg 30: [mem 0xfea20000-0xfea2ffff pref]
[ 0.192480] pci 0000:00:10.0: [8086:100f] type 0 class 0x000200
[ 0.194252] pci 0000:00:10.0: reg 10: [mem 0xfe9a0000-0xfe9bffff]
[ 0.197741] pci 0000:00:10.0: reg 14: [io 0xb140-0xb17f]
[ 0.217809] pci 0000:00:10.0: reg 30: [mem 0xfe880000-0xfe8bffff pref]
[ 0.220113] pci 0000:00:11.0: [8086:100f] type 0 class 0x000200
[ 0.221926] pci 0000:00:11.0: reg 10: [mem 0xfe9c0000-0xfe9dffff]
[ 0.228381] pci 0000:00:11.0: reg 14: [io 0xb180-0xb1bf]
[ 0.248039] pci 0000:00:11.0: reg 30: [mem 0xfe8c0000-0xfe8fffff pref]
[ 0.250017] pci 0000:00:12.0: [8086:100f] type 0 class 0x000200
[ 0.253737] pci 0000:00:12.0: reg 10: [mem 0xfe9e0000-0xfe9fffff]
[ 0.257938] pci 0000:00:12.0: reg 14: [io 0xb1c0-0xb1ff]
[ 0.280028] pci 0000:00:12.0: reg 30: [mem 0xfe900000-0xfe93ffff pref]
[ 0.281967] pci 0000:00:13.0: [8086:100f] type 0 class 0x000200
[ 0.284038] pci 0000:00:13.0: reg 10: [mem 0xfea00000-0xfea1ffff]
[ 0.288037] pci 0000:00:13.0: reg 14: [io 0xb200-0xb23f]
[ 0.310039] pci 0000:00:13.0: reg 30: [mem 0xfe940000-0xfe97ffff pref]
[ 0.312162] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.320191] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
[ 0.320522] pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106
[ 0.337890] pci 0000:00:1f.2: reg 20: [io 0xb280-0xb29f]
[ 0.344030] pci 0000:00:1f.2: reg 24: [mem 0xfea35000-0xfea35fff]
[ 0.350095] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.360046] pci 0000:00:1f.3: reg 20: [io 0x0700-0x073f]
[ 0.366216] pci 0000:01:00.0: [1af4:1048] type 0 class 0x000100
[ 0.372048] pci 0000:01:00.0: reg 14: [mem 0xfe600000-0xfe600fff]
[ 0.385830] pci 0000:01:00.0: reg 20: [mem 0xfca00000-0xfca03fff 64bit pref]
[ 0.392259] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.392279] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.392290] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff]
[ 0.392320] pci 0000:00:01.0: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref]
[ 0.396043] pci 0000:02:00.0: [1000:0012] type 0 class 0x000100
[ 0.398657] pci 0000:02:00.0: reg 10: [io 0x9000-0x90ff]
[ 0.404047] pci 0000:02:00.0: reg 14: [mem 0xfe402000-0xfe4023ff]
[ 0.412043] pci 0000:02:00.0: reg 18: [mem 0xfe400000-0xfe401fff]
[ 0.438732] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.438749] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
[ 0.438758] pci 0000:00:02.0: bridge window [mem 0xfe400000-0xfe5fffff]
[ 0.438776] pci 0000:00:02.0: bridge window [mem 0xfc800000-0xfc9fffff 64bit pref]
[ 0.441289] pci 0000:03:00.0: [1af4:1043] type 0 class 0x000780
[ 0.445667] pci 0000:03:00.0: reg 14: [mem 0xfe200000-0xfe200fff]
[ 0.459414] pci 0000:03:00.0: reg 20: [mem 0xfc600000-0xfc603fff 64bit pref]
[ 0.468658] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.468685] pci 0000:00:03.0: bridge window [io 0x8000-0x8fff]
[ 0.468696] pci 0000:00:03.0: bridge window [mem 0xfe200000-0xfe3fffff]
[ 0.468729] pci 0000:00:03.0: bridge window [mem 0xfc600000-0xfc7fffff 64bit pref]
[ 0.471320] pci 0000:04:00.0: [1af4:1045] type 0 class 0x0000ff
[ 0.482206] pci 0000:04:00.0: reg 20: [mem 0xfc400000-0xfc403fff 64bit pref]
[ 0.485681] pci 0000:00:05.0: PCI bridge to [bus 04-04]
[ 0.485696] pci 0000:00:05.0: bridge window [io 0x7000-0x7fff]
[ 0.485707] pci 0000:00:05.0: bridge window [mem 0xfe000000-0xfe1fffff]
[ 0.485728] pci 0000:00:05.0: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref]
[ 0.489441] pci 0000:05:00.0: [1b36:0001] type 1 class 0x000604
[ 0.492075] pci 0000:05:00.0: reg 10: [mem 0xfde00000-0xfde000ff 64bit]
[ 0.498544] pci 0000:05:01.0: [1b36:0001] type 1 class 0x000604
[ 0.501523] pci 0000:05:01.0: reg 10: [mem 0xfde01000-0xfde010ff 64bit]
[ 0.508394] pci 0000:05:02.0: [1b36:0001] type 1 class 0x000604
[ 0.510626] pci 0000:05:02.0: reg 10: [mem 0xfde02000-0xfde020ff 64bit]
[ 0.518467] pci 0000:05:03.0: [1b36:0001] type 1 class 0x000604
[ 0.520077] pci 0000:05:03.0: reg 10: [mem 0xfde03000-0xfde030ff 64bit]
[ 0.528389] pci 0000:05:04.0: [1b36:0001] type 1 class 0x000604
[ 0.532077] pci 0000:05:04.0: reg 10: [mem 0xfde04000-0xfde040ff 64bit]
[ 0.540239] pci 0000:05:05.0: [1b36:0001] type 1 class 0x000604
[ 0.542322] pci 0000:05:05.0: reg 10: [mem 0xfde05000-0xfde050ff 64bit]
[ 0.548448] pci 0000:00:1e.0: PCI bridge to [bus 05-0b] (subtractive decode)
[ 0.548464] pci 0000:00:1e.0: bridge window [io 0x1000-0x6fff]
[ 0.548475] pci 0000:00:1e.0: bridge window [mem 0xfd200000-0xfdffffff]
[ 0.548496] pci 0000:00:1e.0: bridge window [mem 0xfb800000-0xfc3fffff 64bit pref]
[ 0.548499] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.548500] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.548502] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.548504] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.551370] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[ 0.551384] pci 0000:05:00.0: bridge window [io 0x6000-0x6fff]
[ 0.551409] pci 0000:05:00.0: bridge window [mem 0xfdc00000-0xfddfffff]
[ 0.551430] pci 0000:05:00.0: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
[ 0.553517] pci 0000:05:01.0: PCI bridge to [bus 07-07]
[ 0.553531] pci 0000:05:01.0: bridge window [io 0x5000-0x5fff]
[ 0.553543] pci 0000:05:01.0: bridge window [mem 0xfda00000-0xfdbfffff]
[ 0.553565] pci 0000:05:01.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
[ 0.556243] pci 0000:08:01.0: [8086:100f] type 0 class 0x000200
[ 0.558311] pci 0000:08:01.0: reg 10: [mem 0xfd840000-0xfd85ffff]
[ 0.564276] pci 0000:08:01.0: reg 14: [io 0x4000-0x403f]
[ 0.589873] pci 0000:08:01.0: reg 30: [mem 0xfd800000-0xfd83ffff pref]
[ 0.592452] pci 0000:05:02.0: PCI bridge to [bus 08-08]
[ 0.592493] pci 0000:05:02.0: bridge window [io 0x4000-0x4fff]
[ 0.592521] pci 0000:05:02.0: bridge window [mem 0xfd800000-0xfd9fffff]
[ 0.592555] pci 0000:05:02.0: bridge window [mem 0xfbe00000-0xfbffffff 64bit pref]
[ 0.596607] pci 0000:05:03.0: PCI bridge to [bus 09-09]
[ 0.596619] pci 0000:05:03.0: bridge window [io 0x3000-0x3fff]
[ 0.596641] pci 0000:05:03.0: bridge window [mem 0xfd600000-0xfd7fffff]
[ 0.596668] pci 0000:05:03.0: bridge window [mem 0xfbc00000-0xfbdfffff 64bit pref]
[ 0.601936] pci 0000:0a:01.0: [8086:100f] type 0 class 0x000200
[ 0.604088] pci 0000:0a:01.0: reg 10: [mem 0xfd440000-0xfd45ffff]
[ 0.612066] pci 0000:0a:01.0: reg 14: [io 0x2000-0x203f]
[ 0.633912] pci 0000:0a:01.0: reg 30: [mem 0xfd400000-0xfd43ffff pref]
[ 0.636213] pci 0000:05:04.0: PCI bridge to [bus 0a-0a]
[ 0.636226] pci 0000:05:04.0: bridge window [io 0x2000-0x2fff]
[ 0.636236] pci 0000:05:04.0: bridge window [mem 0xfd400000-0xfd5fffff]
[ 0.636254] pci 0000:05:04.0: bridge window [mem 0xfba00000-0xfbbfffff 64bit pref]
[ 0.638454] pci 0000:0b:01.0: [8086:100f] type 0 class 0x000200
[ 0.641528] pci 0000:0b:01.0: reg 10: [mem 0xfd240000-0xfd25ffff]
[ 0.645854] pci 0000:0b:01.0: reg 14: [io 0x1000-0x103f]
[ 0.667521] pci 0000:0b:01.0: reg 30: [mem 0xfd200000-0xfd23ffff pref]
[ 0.668264] pci 0000:05:05.0: PCI bridge to [bus 0b-0b]
[ 0.668280] pci 0000:05:05.0: bridge window [io 0x1000-0x1fff]
[ 0.668292] pci 0000:05:05.0: bridge window [mem 0xfd200000-0xfd3fffff]
[ 0.668314] pci 0000:05:05.0: bridge window [mem 0xfb800000-0xfb9fffff 64bit pref]
[ 0.699445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.700487] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.700564] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.704353] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.704432] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.704491] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.704547] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.704602] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11)
[ 0.704657] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11)
[ 0.704712] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11)
[ 0.704773] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11)
[ 0.704804] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
[ 0.704814] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
[ 0.704824] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
[ 0.704833] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
[ 0.704854] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
[ 0.704863] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
[ 0.704873] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
[ 0.704883] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
[ 0.704953] vgaarb: device added: PCI:0000:00:0b.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.704961] vgaarb: loaded
[ 0.705044] PCI: Using ACPI for IRQ routing
[ 0.740685] PCI: pci_cache_line_size set to 64 bytes
[ 0.740955] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.740957] reserve RAM buffer: 000000007ffdf000 - 000000007fffffff
[ 0.741021] NetLabel: Initializing
[ 0.741023] NetLabel: domain hash size = 128
[ 0.741024] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.741032] NetLabel: unlabeled traffic allowed by default
[ 0.741048] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.741059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.741062] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.748062] Switching to clocksource kvm-clock
[ 0.748856] AppArmor: AppArmor Filesystem Enabled
[ 0.748872] pnp: PnP ACPI init
[ 0.748881] ACPI: bus type pnp registered
[ 0.748897] pnp 00:00: [bus 00-ff]
[ 0.748899] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.748900] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.748901] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.748902] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.748904] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.748932] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.748940] pnp 00:01: [io 0x0070-0x0071]
[ 0.748961] pnp 00:01: [irq 8]
[ 0.748963] pnp 00:01: [io 0x0072-0x0077]
[ 0.748977] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.748993] pnp 00:02: [io 0x0060]
[ 0.748994] pnp 00:02: [io 0x0064]
[ 0.749005] pnp 00:02: [irq 1]
[ 0.749020] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.749039] pnp 00:03: [irq 12]
[ 0.749051] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.749103] pnp 00:04: [io 0x03f8-0x03ff]
[ 0.749124] pnp 00:04: [irq 4]
[ 0.749139] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.749163] pnp 00:05: [io 0x0cd8-0x0ce3]
[ 0.749175] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 0.749200] pnp 00:06: [io 0x0620-0x062f]
[ 0.749214] pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 0.749271] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.749288] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.749434] pnp: PnP ACPI: found 8 devices
[ 0.749436] ACPI: ACPI bus type pnp unregistered
[ 0.754677] PCI: max bus depth: 2 pci_try_num: 3
[ 0.784319] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.784331] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.787172] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff]
[ 0.789881] pci 0000:00:01.0: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref]
[ 0.794876] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.794888] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
[ 0.797674] pci 0000:00:02.0: bridge window [mem 0xfe400000-0xfe5fffff]
[ 0.799722] pci 0000:00:02.0: bridge window [mem 0xfc800000-0xfc9fffff 64bit pref]
[ 0.805616] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.805632] pci 0000:00:03.0: bridge window [io 0x8000-0x8fff]
[ 0.808795] pci 0000:00:03.0: bridge window [mem 0xfe200000-0xfe3fffff]
[ 0.810937] pci 0000:00:03.0: bridge window [mem 0xfc600000-0xfc7fffff 64bit pref]
[ 0.815292] pci 0000:00:05.0: PCI bridge to [bus 04-04]
[ 0.815315] pci 0000:00:05.0: bridge window [io 0x7000-0x7fff]
[ 0.819725] pci 0000:00:05.0: bridge window [mem 0xfe000000-0xfe1fffff]
[ 0.821595] pci 0000:00:05.0: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref]
[ 0.825467] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[ 0.825480] pci 0000:05:00.0: bridge window [io 0x6000-0x6fff]
[ 0.829061] pci 0000:05:00.0: bridge window [mem 0xfdc00000-0xfddfffff]
[ 0.832554] pci 0000:05:00.0: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
[ 0.836455] pci 0000:05:01.0: PCI bridge to [bus 07-07]
[ 0.836468] pci 0000:05:01.0: bridge window [io 0x5000-0x5fff]
[ 0.839439] pci 0000:05:01.0: bridge window [mem 0xfda00000-0xfdbfffff]
[ 0.841390] pci 0000:05:01.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
[ 0.846546] pci 0000:05:02.0: PCI bridge to [bus 08-08]
[ 0.846559] pci 0000:05:02.0: bridge window [io 0x4000-0x4fff]
[ 0.849218] pci 0000:05:02.0: bridge window [mem 0xfd800000-0xfd9fffff]
[ 0.851026] pci 0000:05:02.0: bridge window [mem 0xfbe00000-0xfbffffff 64bit pref]
[ 0.855970] pci 0000:05:03.0: PCI bridge to [bus 09-09]
[ 0.855983] pci 0000:05:03.0: bridge window [io 0x3000-0x3fff]
[ 0.858800] pci 0000:05:03.0: bridge window [mem 0xfd600000-0xfd7fffff]
[ 0.860601] pci 0000:05:03.0: bridge window [mem 0xfbc00000-0xfbdfffff 64bit pref]
[ 0.864690] pci 0000:05:04.0: PCI bridge to [bus 0a-0a]
[ 0.864716] pci 0000:05:04.0: bridge window [io 0x2000-0x2fff]
[ 0.869253] pci 0000:05:04.0: bridge window [mem 0xfd400000-0xfd5fffff]
[ 0.871121] pci 0000:05:04.0: bridge window [mem 0xfba00000-0xfbbfffff 64bit pref]
[ 0.874685] pci 0000:05:05.0: PCI bridge to [bus 0b-0b]
[ 0.874697] pci 0000:05:05.0: bridge window [io 0x1000-0x1fff]
[ 0.877806] pci 0000:05:05.0: bridge window [mem 0xfd200000-0xfd3fffff]
[ 0.881138] pci 0000:05:05.0: bridge window [mem 0xfb800000-0xfb9fffff 64bit pref]
[ 0.884715] pci 0000:00:1e.0: PCI bridge to [bus 05-0b]
[ 0.884728] pci 0000:00:1e.0: bridge window [io 0x1000-0x6fff]
[ 0.887539] pci 0000:00:1e.0: bridge window [mem 0xfd200000-0xfdffffff]
[ 0.889363] pci 0000:00:1e.0: bridge window [mem 0xfb800000-0xfc3fffff 64bit pref]
[ 0.894287] ACPI: PCI Interrupt Link [GSIF] enabled at IRQ 21
[ 0.894313] pci 0000:00:01.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21
[ 0.896267] pci 0000:00:01.0: setting latency timer to 64
[ 0.896292] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
[ 0.896310] pci 0000:00:02.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22
[ 0.898534] pci 0000:00:02.0: setting latency timer to 64
[ 0.898557] ACPI: PCI Interrupt Link [GSIH] enabled at IRQ 23
[ 0.898572] pci 0000:00:03.0: PCI INT A -> Link[GSIH] -> GSI 23 (level, high) -> IRQ 23
[ 0.902299] pci 0000:00:03.0: setting latency timer to 64
[ 0.902316] pci 0000:00:05.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21
[ 0.904968] pci 0000:00:05.0: setting latency timer to 64
[ 0.907883] pci 0000:00:1e.0: setting latency timer to 64
[ 0.907912] ACPI: PCI Interrupt Link [GSIE] enabled at IRQ 20
[ 0.907931] pci 0000:05:00.0: PCI INT A -> Link[GSIE] -> GSI 20 (level, high) -> IRQ 20
[ 0.911001] pci 0000:05:00.0: setting latency timer to 64
[ 0.911016] pci 0000:05:01.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21
[ 0.914849] pci 0000:05:01.0: setting latency timer to 64
[ 0.916543] pci 0000:05:02.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22
[ 0.920011] pci 0000:05:02.0: setting latency timer to 64
[ 0.920025] pci 0000:05:03.0: PCI INT A -> Link[GSIH] -> GSI 23 (level, high) -> IRQ 23
[ 0.924148] pci 0000:05:03.0: setting latency timer to 64
[ 0.924162] pci 0000:05:04.0: PCI INT A -> Link[GSIE] -> GSI 20 (level, high) -> IRQ 20
[ 0.928087] pci 0000:05:04.0: setting latency timer to 64
[ 0.929779] pci 0000:05:05.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21
[ 0.933839] pci 0000:05:05.0: setting latency timer to 64
[ 0.933847] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.933848] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.933849] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.933850] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.933852] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.933853] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff]
[ 0.933854] pci_bus 0000:01: resource 2 [mem 0xfca00000-0xfcbfffff 64bit pref]
[ 0.933855] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.933857] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe5fffff]
[ 0.933858] pci_bus 0000:02: resource 2 [mem 0xfc800000-0xfc9fffff 64bit pref]
[ 0.933859] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
[ 0.933860] pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe3fffff]
[ 0.933861] pci_bus 0000:03: resource 2 [mem 0xfc600000-0xfc7fffff 64bit pref]
[ 0.933863] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 0.933864] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe1fffff]
[ 0.933865] pci_bus 0000:04: resource 2 [mem 0xfc400000-0xfc5fffff 64bit pref]
[ 0.933867] pci_bus 0000:05: resource 0 [io 0x1000-0x6fff]
[ 0.933868] pci_bus 0000:05: resource 1 [mem 0xfd200000-0xfdffffff]
[ 0.933869] pci_bus 0000:05: resource 2 [mem 0xfb800000-0xfc3fffff 64bit pref]
[ 0.933870] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.933871] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.933872] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.933873] pci_bus 0000:05: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.933874] pci_bus 0000:06: resource 0 [io 0x6000-0x6fff]
[ 0.933875] pci_bus 0000:06: resource 1 [mem 0xfdc00000-0xfddfffff]
[ 0.933877] pci_bus 0000:06: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
[ 0.933878] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
[ 0.933879] pci_bus 0000:07: resource 1 [mem 0xfda00000-0xfdbfffff]
[ 0.933880] pci_bus 0000:07: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
[ 0.933881] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.933882] pci_bus 0000:08: resource 1 [mem 0xfd800000-0xfd9fffff]
[ 0.933883] pci_bus 0000:08: resource 2 [mem 0xfbe00000-0xfbffffff 64bit pref]
[ 0.933885] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
[ 0.933886] pci_bus 0000:09: resource 1 [mem 0xfd600000-0xfd7fffff]
[ 0.933887] pci_bus 0000:09: resource 2 [mem 0xfbc00000-0xfbdfffff 64bit pref]
[ 0.933888] pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
[ 0.933889] pci_bus 0000:0a: resource 1 [mem 0xfd400000-0xfd5fffff]
[ 0.933890] pci_bus 0000:0a: resource 2 [mem 0xfba00000-0xfbbfffff 64bit pref]
[ 0.933891] pci_bus 0000:0b: resource 0 [io 0x1000-0x1fff]
[ 0.933892] pci_bus 0000:0b: resource 1 [mem 0xfd200000-0xfd3fffff]
[ 0.933893] pci_bus 0000:0b: resource 2 [mem 0xfb800000-0xfb9fffff 64bit pref]
[ 0.934137] NET: Registered protocol family 2
[ 0.934476] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.935335] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.936309] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.936366] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.936368] TCP reno registered
[ 0.936379] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.936578] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.936663] NET: Registered protocol family 1
[ 0.936722] pci 0000:00:0b.0: Boot video device
[ 0.936835] PCI: CLS 0 bytes, default 64
[ 0.936860] Unpacking initramfs...
[ 1.008998] Freeing initrd memory: 5756k freed
[ 1.009506] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.009511] Placing 64MB software IO TLB between ffff88007bfd4000 - ffff88007ffd4000
[ 1.009514] software IO TLB at phys 0x7bfd4000 - 0x7ffd4000
[ 1.010012] futex hash table entries: 512 (order: 4, 65536 bytes)
[ 1.010021] Initialise module verification
[ 1.010110] audit: initializing netlink socket (enabled)
[ 1.010120] type=2000 audit(1482299081.004:1): initialized
[ 1.027465] bounce pool size: 64 pages
[ 1.027472] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.028795] VFS: Disk quotas dquot_6.5.2
[ 1.028828] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.029085] msgmni has been set to 5955
[ 1.029234] alg: No test for stdrng (krng)
[ 1.029242] Asymmetric key parser 'x509' registered
[ 1.029266] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.029286] io scheduler noop registered (default)
[ 1.029289] io scheduler deadline registered
[ 1.029313] io scheduler cfq registered
[ 1.029511] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.029746] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.033431] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.033607] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
[ 1.036247] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.036403] pcieport 0000:00:03.0: irq 42 for MSI/MSI-X
[ 1.038964] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.039133] pcieport 0000:00:05.0: irq 43 for MSI/MSI-X
[ 1.043027] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 1.043110] aer 0000:00:02.0:pcie02: service driver aer loaded
[ 1.043192] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 1.043273] aer 0000:00:05.0:pcie02: service driver aer loaded
[ 1.043300] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 1.043304] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.043314] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 1.043335] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.043337] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.043348] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.043368] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 1.043370] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.043381] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 1.043401] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 1.043403] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.043413] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 1.043455] vesafb: mode is 1024x768x24, linelength=3072, pages=2
[ 1.043457] vesafb: scrolling: redraw
[ 1.043459] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.043494] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90012680000, using 4608k, total 8192k
[ 1.043581] bootsplash 3.2.0-2010/03/31: looking for picture...
[ 1.043582] bootsplash: silentjpeg size 59221 bytes
[ 1.049326] bootsplash: ...found (1024x768, 31358 bytes, v3).
[ 1.060316] Console: switching to colour frame buffer device 124x44
[ 1.070587] fb0: VESA VGA frame buffer device
[ 1.070612] GHES: HEST is not enabled!
[ 1.070645] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.070813] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.168279] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.180215] Non-volatile memory driver v1.3
[ 1.180219] Linux agpgart interface v0.103
[ 1.180278] Fixed MDIO Bus: probed
[ 1.180306] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.180798] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.180804] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.180839] mousedev: PS/2 mouse device common for all mice
[ 1.181015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.181281] cpuidle: using governor ladder
[ 1.181283] cpuidle: using governor menu
[ 1.181286] EFI Variables Facility v0.08 2004-May-17
[ 1.181445] TCP cubic registered
[ 1.181493] Registering the dns_resolver key type
[ 1.181569] Loading module verification certificates
[ 1.181608] MODSIGN: Loaded cert 'SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7'
[ 1.181653] MODSIGN: Loaded cert 'SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7'
[ 1.181678] PM: Checking hibernation image partition /dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part5
[ 1.181679] PM: Hibernation image not present or could not be loaded.
[ 1.181685] registered taskstats version 1
[ 1.182960] Magic number: 12:932:721
[ 1.184178] Freeing unused kernel memory: 1360k freed
[ 1.184324] Write protecting the kernel read-only data: 10240k
[ 1.186647] Freeing unused kernel memory: 1560k freed
[ 1.188104] Freeing unused kernel memory: 900k freed
[ 1.215730] SCSI subsystem initialized
[ 1.216262] megasas: 06.806.08.00-rc1 Thu. Sep. 4 17:00:00 PDT 2014
[ 1.216299] megasas: 0x1000:0x0079:0x1000:0x9261: bus 0:slot 6:func 0
[ 1.216353] megaraid_sas 0000:00:06.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22
[ 1.216405] megaraid_sas 0000:00:06.0: setting latency timer to 64
[ 1.216537] megasas: FW now in Ready state
[ 1.216685] megaraid_sas 0000:00:06.0: irq 44 for MSI/MSI-X
[ 1.216722] megaraid_sas 0000:00:06.0: [scsi0]: FW supports<0> MSIX vector,Online CPUs: <2>,Current MSIX <1>
[ 1.217229] megasas_init_mfi: fw_support_ieee=67108864
[ 1.217231] megasas: INIT adapter done
[ 1.217296] megaraid_sas 0000:00:06.0: Controller type: MR,Memory size is: 512MB
[ 1.217356] scsi0 : LSI SAS based MegaRAID driver
[ 1.219078] scsi 0:2:0:0: Direct-Access FTS PRAID EP420i 4.25 PQ: 0 ANSI: 5
[ 1.227812] libata version 3.00 loaded.
[ 1.228224] ahci 0000:00:1f.2: version 3.0
[ 1.228262] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
[ 1.228305] ahci 0000:00:1f.2: PCI INT A -> Link[GSIA] -> GSI 16 (level, high) -> IRQ 16
[ 1.228418] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.228644] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[ 1.228671] ahci 0000:00:1f.2: flags: ncq only
[ 1.228705] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.229202] scsi1 : ahci
[ 1.229274] scsi2 : ahci
[ 1.229332] scsi3 : ahci
[ 1.229388] scsi4 : ahci
[ 1.229443] scsi5 : ahci
[ 1.229498] scsi6 : ahci
[ 1.229555] ata2: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35100 irq 45
[ 1.229584] ata3: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35180 irq 45
[ 1.229612] ata4: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35200 irq 45
[ 1.229639] ata5: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35280 irq 45
[ 1.229666] ata6: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35300 irq 45
[ 1.229693] ata7: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35380 irq 45
[ 1.548118] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.548228] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.548325] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.548423] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.548516] ata4.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.548542] ata4.00: applying bridge limits
[ 1.548630] ata4.00: configured for UDMA/100
[ 1.548738] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.548831] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.548952] scsi 3:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.552265] sym53c8xx 0000:02:00.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22
[ 1.553199] sym0: <895a> rev 0x0 at pci 0000:02:00.0 irq 22
[ 1.555289] sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
[ 1.557244] sym0: SCSI BUS has been reset.
[ 1.563253] scsi7 : sym-2.2.3
[ 1.820736] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
[ 2.024140] Refined TSC clocksource calibration: 2594.035 MHz.
[ 4.568761] emc: device handler registered
[ 4.572107] hp_sw: device handler registered
[ 4.575053] alua: device handler registered
[ 4.577947] rdac: device handler registered
[ 4.580012] udev: starting version 147
[ 4.621894] sd 0:2:0:0: [sda] 629145600 512-byte logical blocks: (322 GB/300 GiB)
[ 4.622012] sd 0:2:0:0: [sda] Write Protect is off
[ 4.622037] sd 0:2:0:0: [sda] Mode Sense: 63 00 00 08
[ 4.622068] sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.177415] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 6.177954] sd 0:2:0:0: [sda] Attached SCSI disk
[ 6.178544] ACPI: acpi_idle registered with cpuidle
[ 8.071851] kjournald starting. Commit interval 15 seconds
[ 8.072032] EXT3-fs (sda7): using internal journal
[ 8.072073] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 15.057055] udev: starting version 147
[ 15.863470] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 15.863526] ACPI: Power Button [PWRF]
[ 15.870506] iTCO_vendor_support: vendor-support=0
[ 15.892591] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 16.165060] i801_smbus 0000:00:1f.3: PCI INT A -> Link[GSIA] -> GSI 16 (level, high) -> IRQ 16
[ 16.201401] rtc_cmos 00:01: RTC can wake from S4
[ 16.201625] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 16.201770] rtc0: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[ 16.241804] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.243779] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.248718] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 16.248857] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
[ 16.248950] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.468604] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 16.468636] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 16.468701] e1000 0000:00:04.0: PCI INT A -> Link[GSIE] -> GSI 20 (level, high) -> IRQ 20
[ 16.471476] e1000 0000:00:04.0: setting latency timer to 64
[ 16.600104] sd 0:2:0:0: Attached scsi generic sg0 type 0
[ 16.600169] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 16.608541] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 16.608597] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 16.608711] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 16.787041] e1000 0000:00:04.0: eth0: (PCI:33MHz:32-bit) 00:82:67:84:02:01
[ 16.787072] e1000 0000:00:04.0: eth0: Intel(R) PRO/1000 Network Connection
[ 16.787122] e1000 0000:00:10.0: PCI INT A -> Link[GSIE] -> GSI 20 (level, high) -> IRQ 20
[ 16.789816] e1000 0000:00:10.0: setting latency timer to 64
[ 17.106385] e1000 0000:00:10.0: eth1: (PCI:33MHz:32-bit) 00:82:67:84:02:02
[ 17.106445] e1000 0000:00:10.0: eth1: Intel(R) PRO/1000 Network Connection
[ 17.106520] e1000 0000:00:11.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21
[ 17.110519] e1000 0000:00:11.0: setting latency timer to 64
[ 17.427333] e1000 0000:00:11.0: eth2: (PCI:33MHz:32-bit) 00:fc:61:69:00:03
[ 17.427366] e1000 0000:00:11.0: eth2: Intel(R) PRO/1000 Network Connection
[ 17.427417] e1000 0000:00:12.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22
[ 17.430085] e1000 0000:00:12.0: setting latency timer to 64
[ 17.744008] e1000 0000:00:12.0: eth3: (PCI:33MHz:32-bit) 00:fc:61:69:00:04
[ 17.744042] e1000 0000:00:12.0: eth3: Intel(R) PRO/1000 Network Connection
[ 17.744093] e1000 0000:00:13.0: PCI INT A -> Link[GSIH] -> GSI 23 (level, high) -> IRQ 23
[ 17.747050] e1000 0000:00:13.0: setting latency timer to 64
[ 18.060185] e1000 0000:00:13.0: eth4: (PCI:33MHz:32-bit) 00:fc:61:69:00:06
[ 18.060219] e1000 0000:00:13.0: eth4: Intel(R) PRO/1000 Network Connection
[ 18.060291] e1000 0000:08:01.0: PCI INT A -> Link[GSIH] -> GSI 23 (level, high) -> IRQ 23
[ 18.063400] e1000 0000:08:01.0: setting latency timer to 64
[ 18.381713] e1000 0000:08:01.0: eth5: (PCI:33MHz:32-bit) 00:86:67:84:02:06
[ 18.381769] e1000 0000:08:01.0: eth5: Intel(R) PRO/1000 Network Connection
[ 18.381865] e1000 0000:0a:01.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21
[ 18.386815] e1000 0000:0a:01.0: setting latency timer to 64
[ 18.708057] e1000 0000:0a:01.0: eth6: (PCI:33MHz:32-bit) 00:82:67:84:02:04
[ 18.708103] e1000 0000:0a:01.0: eth6: Intel(R) PRO/1000 Network Connection
[ 18.708161] e1000 0000:0b:01.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22
[ 18.711324] e1000 0000:0b:01.0: setting latency timer to 64
[ 19.032168] e1000 0000:0b:01.0: eth7: (PCI:33MHz:32-bit) 00:82:67:84:02:05
[ 19.032216] e1000 0000:0b:01.0: eth7: Intel(R) PRO/1000 Network Connection
[ 19.133896] Adding 12585980k swap on /dev/sda5. Priority:-1 extents:1 across:12585980k
[ 19.854883] type=1111 audit(1482299099.852:2): user pid=973 uid=0 auid=4294967295 ses=4294967295 msg='changing system time: exe="/sbin/hwclock" (hostname=?, addr=?, terminal=console res=success)'
[ 19.897235] device-mapper: uevent: version 1.0.3
[ 19.897320] device-mapper: ioctl: 4.25.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 19.957908] pps_core: LinuxPPS API ver. 1 registered
[ 19.957950] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 20.026615] PTP clock support registered
[ 22.537127] loop: module loaded
[ 23.594293] kjournald starting. Commit interval 15 seconds
[ 23.594444] EXT3-fs (sda6): using internal journal
[ 23.594522] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 26.384954] fuse init (API version 7.16)
[ 30.092813] ipmi message handler version 39.2
[ 30.129583] ipmi device interface
[ 30.131273] IPMI System Interface driver.
[ 30.131360] ipmi_si: probing via SMBIOS
[ 30.131362] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 30.131364] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 30.131366] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 30.131378] ipmi_si: Interface detection failed
[ 63.909062] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 64.083821] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 64.109199] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 64.135567] type=1325 audit(1482299144.132:3): table=filter family=2 entries=0
[ 64.135612] type=1300 audit(1482299144.132:3): arch=c000003e syscall=175 success=yes exit=0 a0=7f46a948e000 a1=1ea7 a2=6276a0 a3=7ffcb132a1c0 items=0 ppid=1784 pid=1785 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/sbin/modprobe" key=(null)
[ 64.144395] type=1325 audit(1482299144.140:4): table=raw family=2 entries=0
[ 64.144434] type=1300 audit(1482299144.140:4): arch=c000003e syscall=175 success=yes exit=0 a0=7f00f3a0f000 a1=1a1f a2=6276a0 a3=7fffb525d110 items=0 ppid=1790 pid=1791 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/sbin/modprobe" key=(null)
[ 64.166964] type=1325 audit(1482299144.164:5): table=filter family=2 entries=4
[ 64.166975] type=1300 audit(1482299144.164:5): arch=c000003e syscall=54 success=yes exit=0 a0=5 a1=0 a2=40 a3=60fa90 items=0 ppid=1756 pid=1783 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-batch" exe="/usr/sbin/iptables-batch" key=(null)
[ 64.183076] type=1325 audit(1482299144.164:6): table=raw family=2 entries=3
[ 64.183097] type=1300 audit(1482299144.164:6): arch=c000003e syscall=54 success=yes exit=0 a0=7 a1=0 a2=40 a3=60b320 items=0 ppid=1756 pid=1783 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-batch" exe="/usr/sbin/iptables-batch" key=(null)
[ 85.237187] Disabling lock debugging due to kernel taint
[ 88.628459] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 88.841291] device eth2 entered promiscuous mode
[ 88.841307] type=1700 audit(1482299168.832:7): dev=eth2 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[ 88.843093] type=1300 audit(1482299168.832:7): arch=c000003e syscall=46 success=yes exit=32 a0=3 a1=7ffdf9457a60 a2=0 a3=7ffdf94577d0 items=0 ppid=3727 pid=3905 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip" exe="/sbin/ip" key=(null)
[ 88.844440] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 89.015266] device eth3 entered promiscuous mode
[ 89.015273] type=1700 audit(1482299169.008:8): dev=eth3 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[ 89.016822] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 89.018731] type=1300 audit(1482299169.008:8): arch=c000003e syscall=46 success=yes exit=32 a0=3 a1=7fff65a3e840 a2=0 a3=7fff65a3e5b0 items=0 ppid=3958 pid=4136 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip" exe="/sbin/ip" key=(null)
[ 89.202808] device eth4 entered promiscuous mode
[ 89.202814] type=1700 audit(1482299169.196:9): dev=eth4 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[ 89.204429] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 89.206188] type=1300 audit(1482299169.196:9): arch=c000003e syscall=46 success=yes exit=32 a0=3 a1=7fff62328c10 a2=0 a3=7fff62328980 items=0 ppid=4189 pid=4367 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip" exe="/sbin/ip" key=(null)
[ 91.960225] 802.1Q VLAN Support v1.8
[ 91.960243] 8021q: adding VLAN 0 to HW filter on device eth0
[ 91.960322] 8021q: adding VLAN 0 to HW filter on device eth2
[ 91.960393] 8021q: adding VLAN 0 to HW filter on device eth3
[ 91.960460] 8021q: adding VLAN 0 to HW filter on device eth4
[ 91.962160] NET: Registered protocol family 17
[ 92.130044] scsi8 : FCoE Driver
[ 92.130226] fcoe: No FDMI support.
[ 92.130375] host8: libfc: Link up on port (000000)
[ 92.132238] scsi9 : FCoE Driver
[ 92.132445] fcoe: No FDMI support.
[ 92.132564] host9: libfc: Link up on port (000000)
[ 92.134603] scsi10 : FCoE Driver
[ 92.134880] fcoe: No FDMI support.
[ 92.134987] host10: libfc: Link up on port (000000)
[ 92.632771] host8: Assigned Port ID 000006
[ 92.660737] host9: Assigned Port ID 000004
[ 92.716637] host10: Assigned Port ID 000003
[ 95.888479] scsi 10:0:0:0: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 95.888589] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 95.889364] scsi 10:0:0:7: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 95.889445] sd 10:0:0:7: Attached scsi generic sg3 type 0
[ 95.889660] sd 10:0:0:0: [sdb] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 95.890199] scsi 10:0:0:6: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 95.890316] sd 10:0:0:6: Attached scsi generic sg4 type 0
[ 95.890493] sd 10:0:0:7: [sdc] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 95.890851] sd 10:0:0:0: [sdb] Write Protect is off
[ 95.890854] sd 10:0:0:0: [sdb] Mode Sense: 69 00 00 08
[ 95.890986] scsi 10:0:0:5: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 95.891059] sd 10:0:0:5: Attached scsi generic sg5 type 0
[ 95.891728] sd 10:0:0:6: [sdd] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 95.891774] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 95.892210] sd 10:0:0:7: [sdc] Write Protect is off
[ 95.892214] sd 10:0:0:7: [sdc] Mode Sense: 69 00 00 08
[ 95.892239] scsi 10:0:0:4: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 95.892349] sd 10:0:0:4: Attached scsi generic sg6 type 0
[ 95.892461] sd 10:0:0:5: [sde] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 95.893003] sd 10:0:0:7: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 95.893128] scsi 10:0:0:3: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 95.893252] sd 10:0:0:4: [sdf] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 95.893266] sd 10:0:0:3: Attached scsi generic sg7 type 0
[ 95.893418] sd 10:0:0:6: [sdd] Write Protect is off
[ 95.893422] sd 10:0:0:6: [sdd] Mode Sense: 69 00 00 08
[ 95.893832] scsi 10:0:0:2: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 95.893970] sd 10:0:0:5: [sde] Write Protect is off
[ 95.893974] sd 10:0:0:5: [sde] Mode Sense: 69 00 00 08
[ 95.894059] sd 10:0:0:6: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 95.894163] sd 10:0:0:2: Attached scsi generic sg8 type 0
[ 95.894325] sd 10:0:0:4: [sdf] Write Protect is off
[ 95.894329] sd 10:0:0:4: [sdf] Mode Sense: 69 00 00 08
[ 95.894633] sd 10:0:0:5: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 95.894763] scsi 10:0:0:15: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 95.894845] sd 10:0:0:15: Attached scsi generic sg9 type 0
[ 95.895127] sd 10:0:0:4: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 95.897501] sd 10:0:0:3: [sdg] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 95.898100] sd 10:0:0:2: [sdh] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 95.899529] sd 10:0:0:3: [sdg] Write Protect is off
[ 95.899533] sd 10:0:0:3: [sdg] Mode Sense: 69 00 00 08
[ 95.899838] sdb: sdb1
[ 95.901241] sd 10:0:0:3: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 95.901518] sd 10:0:0:2: [sdh] Write Protect is off
[ 95.901522] sd 10:0:0:2: [sdh] Mode Sense: 69 00 00 08
[ 95.902206] sdc: sdc1
[ 95.902851] sd 10:0:0:2: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 95.903904] sdd: sdd1
[ 95.905098] sdf: sdf1
[ 95.905114] sde: sde1
[ 95.906022] sd 10:0:0:0: [sdb] Attached SCSI disk
[ 95.907726] sd 10:0:0:7: [sdc] Attached SCSI disk
[ 95.907733] sd 10:0:0:15: [sdi] 268435456 512-byte logical blocks: (137 GB/128 GiB)
[ 95.908755] sd 10:0:0:4: [sdf] Attached SCSI disk
[ 95.909330] sd 10:0:0:5: [sde] Attached SCSI disk
[ 95.909335] sd 10:0:0:6: [sdd] Attached SCSI disk
[ 95.909445] sd 10:0:0:15: [sdi] Write Protect is off
[ 95.909449] sd 10:0:0:15: [sdi] Mode Sense: 69 00 00 08
[ 95.910663] sdg: sdg1
[ 95.911406] sd 10:0:0:15: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 95.913191] sd 10:0:0:3: [sdg] Attached SCSI disk
[ 95.914314] sdh: sdh1
[ 95.915364] sdi: sdi1 sdi2
[ 95.917605] sd 10:0:0:2: [sdh] Attached SCSI disk
[ 95.920165] sd 10:0:0:15: [sdi] Attached SCSI disk
[ 107.936948] scsi 9:0:1:0: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 107.937099] sd 9:0:1:0: Attached scsi generic sg10 type 0
[ 107.938031] scsi 9:0:1:7: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 107.938121] sd 9:0:1:7: Attached scsi generic sg11 type 0
[ 107.938275] sd 9:0:1:0: [sdj] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 107.938704] scsi 9:0:1:6: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 107.938717] sd 9:0:1:7: [sdk] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 107.938811] sd 9:0:1:6: Attached scsi generic sg12 type 0
[ 107.939390] sd 9:0:1:0: [sdj] Write Protect is off
[ 107.939396] sd 9:0:1:0: [sdj] Mode Sense: 69 00 00 08
[ 107.939526] scsi 9:0:1:5: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 107.939629] sd 9:0:1:5: Attached scsi generic sg13 type 0
[ 107.939847] sd 9:0:1:7: [sdk] Write Protect is off
[ 107.939851] sd 9:0:1:7: [sdk] Mode Sense: 69 00 00 08
[ 107.939887] sd 9:0:1:6: [sdl] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 107.940152] sd 9:0:1:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 107.940434] scsi 9:0:1:4: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 107.940529] sd 9:0:1:4: Attached scsi generic sg14 type 0
[ 107.940549] sd 9:0:1:7: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 107.940939] sd 9:0:1:5: [sdm] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 107.941690] sd 9:0:1:4: [sdn] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 107.941737] sd 9:0:1:6: [sdl] Write Protect is off
[ 107.941741] sd 9:0:1:6: [sdl] Mode Sense: 69 00 00 08
[ 107.941861] scsi 9:0:1:3: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 107.941970] sd 9:0:1:3: Attached scsi generic sg15 type 0
[ 107.942543] sd 9:0:1:5: [sdm] Write Protect is off
[ 107.942548] sd 9:0:1:5: [sdm] Mode Sense: 69 00 00 08
[ 107.942584] sd 9:0:1:6: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 107.942872] scsi 9:0:1:2: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 107.942994] sd 9:0:1:2: Attached scsi generic sg16 type 0
[ 107.943080] sd 9:0:1:3: [sdo] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 107.943419] sd 9:0:1:4: [sdn] Write Protect is off
[ 107.943423] sd 9:0:1:4: [sdn] Mode Sense: 69 00 00 08
[ 107.943454] sd 9:0:1:5: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 107.944243] sd 9:0:1:4: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 107.944415] scsi 9:0:1:15: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5
[ 107.944502] sd 9:0:1:15: Attached scsi generic sg17 type 0
[ 107.944555] sd 9:0:1:3: [sdo] Write Protect is off
[ 107.944559] sd 9:0:1:3: [sdo] Mode Sense: 69 00 00 08
[ 107.945305] sd 9:0:1:3: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 107.946017] sd 9:0:1:2: [sdp] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 107.948170] sd 9:0:1:2: [sdp] Write Protect is off
[ 107.948174] sd 9:0:1:2: [sdp] Mode Sense: 69 00 00 08
[ 107.948960] sd 9:0:1:2: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 107.950163] sd 9:0:1:15: [sdq] 268435456 512-byte logical blocks: (137 GB/128 GiB)
[ 107.950351] sdj: sdj1
[ 107.951403] sdk: sdk1
[ 107.952134] sd 9:0:1:15: [sdq] Write Protect is off
[ 107.952239] sd 9:0:1:15: [sdq] Mode Sense: 69 00 00 08
[ 107.953446] sd 9:0:1:15: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 107.954143] sdm: sdm1
[ 107.955154] sdn: sdn1
[ 107.955822] sdl: sdl1
[ 107.956704] sd 9:0:1:7: [sdk] Attached SCSI disk
[ 107.957232] sdo: sdo1
[ 107.957810] sd 9:0:1:0: [sdj] Attached SCSI disk
[ 107.959769] sd 9:0:1:5: [sdm] Attached SCSI disk
[ 107.960235] sd 9:0:1:4: [sdn] Attached SCSI disk
[ 107.960367] sd 9:0:1:6: [sdl] Attached SCSI disk
[ 107.960821] sd 9:0:1:3: [sdo] Attached SCSI disk
[ 107.961275] sdp: sdp1
[ 107.962658] sdq: sdq1 sdq2
[ 107.965055] sd 9:0:1:2: [sdp] Attached SCSI disk
[ 107.965462] sd 9:0:1:15: [sdq] Attached SCSI disk
[ 110.732002] type=1305 audit(1482299190.728:10): audit_pid=5459 old=0 auid=4294967295 ses=4294967295 res=1
[ 119.896053] RPC: Registered named UNIX socket transport module.
[ 119.896055] RPC: Registered udp transport module.
[ 119.896056] RPC: Registered tcp transport module.
[ 119.896057] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 119.936822] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 120.786124] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 120.786319] NFSD: starting 90-second grace period
[ 122.670069] Fusion MPT base driver 4.28.00.01suse
[ 122.670071] Copyright (c) 1999-2010 LSI Corporation
[ 122.670894] Fusion MPT misc device (ioctl) driver 4.28.00.01suse
[ 122.670923] mptctl: Registered with Fusion MPT base driver
[ 122.670924] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 149.562895] FS-Cache: Loaded
[ 149.568351] FS-Cache: Netfs 'nfs' registered for caching
[ 150.786555] licDriver: module loaded (major: 246)
[ 154.005569] device-mapper: multipath: version 1.6.0 loaded
[ 154.077449] device-mapper: multipath service-time: version 0.2.0 loaded
[ 186.451782] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 203.464834] Emulex LightPulse Fibre Channel SCSI driver 10.6.193.12.6fts
[ 203.464836] Copyright(c) 2004-2015 Emulex. All rights reserved.
[ 203.487950] trc_m: kernel trace driver, version 0.0.1, numeric time zone 01 (1)
[ 204.415921] fct4: ---vvv------------------ fct4_init ------------------vvv---
[ 204.416099] fct4: Fibre Channel SLI4 series SCSI target-mode low level driver 0.0.3
[ 204.416101] fct4: Copyright(c) 2004-2015 Emulex. All rights reserved.
[ 204.416103] fct4: Copyright(c) 2013-2015 Fujitsu Technology Solutions.
[ 204.416104] fct4: operation mode selected: fcp_initiator [ fcp_target ] ficon
[ 304.958437] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 304.959359] bonding: SLAN00 is being created...
[ 304.960193] bonding: SLAN00: Setting MII monitoring interval to 100.
[ 304.960565] bonding: SLAN00: Setting up delay to 30000.
[ 304.960932] bonding: SLAN00: setting mode to active-backup (1).
[ 304.967536] bonding: SLAN00: Adding slave eth5.
[ 304.970978] 8021q: adding VLAN 0 to HW filter on device eth5
[ 304.971044] bonding: SLAN00: enslaving eth5 as a backup interface with a down link.
[ 304.973673] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 305.021450] bonding: SLAN00: link status up for interface eth5, enabling it in 0 ms.
[ 305.022203] 8021q: adding VLAN 0 to HW filter on device SLAN00
[ 305.028061] bonding: SLAN00: link status definitely up for interface eth5, 1000 Mbps full duplex.
[ 305.028064] bonding: SLAN00: making interface eth5 the new active one.
[ 305.028599] bonding: SLAN00: first active interface up!
[ 305.781783] 8021q: adding VLAN 0 to HW filter on device eth1
[ 307.785452] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 308.578641] 8021q: adding VLAN 0 to HW filter on device eth6
[ 310.580552] e1000: eth6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 311.371680] 8021q: adding VLAN 0 to HW filter on device eth7
[ 313.377061] e1000: eth7 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 341.388121] e1000: eth7 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 362.446525] stg4: Fibre Channel SLI4 series SCSI target-mode emulation interface driver 0.0.1
[ 365.219348] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36508 PROTO=2
[ 380.233852] bootsplash: status on console 0 changed to on
[ 493.865879] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36509 PROTO=2
[ 622.512732] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36510 PROTO=2
[ 751.159284] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36511 PROTO=2
[ 879.908301] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36512 PROTO=2
[ 1008.452629] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36513 PROTO=2
[ 1137.211392] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36514 PROTO=2
[ 1265.746245] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36515 PROTO=2
[ 1394.392855] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36516 PROTO=2
[ 1523.039698] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36517 PROTO=2
[ 1651.686362] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36518 PROTO=2
[ 1780.333137] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36519 PROTO=2
[ 1908.980154] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36520 PROTO=2
[ 2037.626674] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36521 PROTO=2
[ 2166.273406] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36522 PROTO=2
[ 2294.964138] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36523 PROTO=2
[ 2423.567323] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36524 PROTO=2
[ 2552.303841] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36525 PROTO=2
[ 2680.860868] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36526 PROTO=2
[ 2809.507369] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36527 PROTO=2
[ 2938.154314] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36528 PROTO=2
[ 3066.801270] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36529 PROTO=2
[ 3195.448035] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36530 PROTO=2
[ 3324.094812] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36531 PROTO=2
[ 3452.741551] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36532 PROTO=2
[ 3581.388298] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36533 PROTO=2
[ 3710.076648] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36534 PROTO=2
[ 3838.682046] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36535 PROTO=2
[ 3967.328830] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36536 PROTO=2
[ 4095.975762] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36537 PROTO=2
[ 4224.622479] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36538 PROTO=2
[ 4353.269140] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36539 PROTO=2
[ 4481.916172] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36540 PROTO=2
[ 4610.562758] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36541 PROTO=2
[ 4739.209599] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36542 PROTO=2
[ 4867.856389] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36543 PROTO=2
[ 4996.503241] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36544 PROTO=2
[ 5125.149921] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36545 PROTO=2
[ 5253.796905] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36546 PROTO=2
[ 5382.552956] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36547 PROTO=2
[ 5511.090612] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36548 PROTO=2
[ 5639.736972] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36549 PROTO=2
[ 5768.383854] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36550 PROTO=2
[ 5897.030603] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36551 PROTO=2
[ 6025.677430] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36552 PROTO=2
[ 6154.324130] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36553 PROTO=2
[ 6282.970960] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36554 PROTO=2
[ 6411.726350] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36555 PROTO=2
[ 6540.264482] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36556 PROTO=2
[ 6668.911452] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36557 PROTO=2
[ 6706.656015] rport-9:0-2: blocked FC remote port time out: removing rport
[ 6706.656019] rport-8:0-3: blocked FC remote port time out: removing rport
[ 6706.656021] rport-10:0-4: blocked FC remote port time out: removing rport
[ 6706.912013] rport-10:0-1: blocked FC remote port time out: removing rport
[ 6706.912017] rport-9:0-3: blocked FC remote port time out: removing rport
[ 6706.912018] rport-8:0-4: blocked FC remote port time out: removing rport
[ 6706.912019] rport-10:0-2: blocked FC remote port time out: removing rport
[ 6706.912021] rport-9:0-1: blocked FC remote port time out: removing rport
[ 6706.912022] rport-8:0-0: blocked FC remote port time out: removing rport
[ 6797.558083] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36558 PROTO=2
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4
2016-12-21 11:51 ` Holger Schranz
@ 2016-12-21 12:39 ` Holger Schranz
0 siblings, 0 replies; 12+ messages in thread
From: Holger Schranz @ 2016-12-21 12:39 UTC (permalink / raw)
To: Fam Zheng; +Cc: mueller-ralf, John Snow, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 8768 bytes --]
Hi,
sorry for an additional mail.
Attached is the iscsiadm information which Fam requested.
Best regards
Holger
Am 21.12.2016 um 12:51 schrieb Holger Schranz:
> Hi Fam, John,
>
> meanwhile i have installed the 2.8.0 from the official wiki.qemu.org
> (tarball says rc4 ??).
>
> About dmesg, I have attached the dmesg from both version. In a short
> view ... in 2.6.2 you see the target stx/sgx and the controller for
> it. In the 2.8.0. nothing to see ... not controller nor devices.
>
> "git bisect" isn't fit to me :(. I never use it.
>
> The request for testing with iscsiadm host side to pass it to QEMU
> I haven't done related to the fact a can't see the controller for the
> iscsi devices in the VM guest. Should I do this in any cases?
>
> Best regards
>
> Holger
>
> Am 21.12.2016 um 05:44 schrieb Holger Schranz:
>> Hi Fam,
>>
>> meanwhile I have sent the requested QEMU CLI direct to John. Your
>> request
>> I will try after the reinstall with the released version.So please wait
>> for a while.
>>
>> Best regards
>>
>> Holger
>>
>> Am 21.12.2016 um 00:47 schrieb Fam Zheng:
>>> On Tue, 12/20 17:53, Holger Schranz wrote:
>>>> Hi John,
>>>>
>>>> sorry or late. I will reproduce it and send you the QEMU command line
>>>> instruction.
>>>>
>>>> About the guest system: LINUX SuSE SLES11 SP4.
>>>>
>>>> About 2.7.0 Release: it doesn't run without the patches for the issue:
>>>> [Qemu-devel] [PATCH] iscsi: Fix divide-by-zero regression on raw SG
>>>> devices
>>>>
>>>> (I can't find the issue number).
>>> Are there any related message showing up in guest dmesg?
>>>
>>> Is it possible to do a git bisect?
>>>
>>> Also, does it work if you login with host side iscsi client
>>> (iscsiadm) and pass
>>> the /dev/sgX to QEMU?
>>>
>>> Fam
>>>
>>>> Best regards
>>>>
>>>> Holger
>>>>
>>>> Am 19.12.2016 um 18:30 schrieb John Snow:
>>>>> On 12/19/2016 04:05 AM, Holger Schranz wrote:
>>>>>> # Strange/wrong behavior in QEMU 2.8.0-rc4
>>>>>>
>>>>>> After update from QEMU 2.6.2 to 2.8.0-rc4 the tape devices
>>>>>> and the corresponding medium changer are no longer available
>>>>>> in the VM quest system.
>>>>>>
>>>>>> The tape devices and the media changer are declared in the
>>>>>> xml-file for libvirt. Both, tape drives and medium changer
>>>>>> are avalilable via iSCSI.
>>>>>>
>>>>>> In a first rough investigation the login in iSCSI runs well
>>>>>> but in QEMU, it seems the devices doesn't reported to the VM-Quest.
>>>>>>
>>>>>> ------------------
>>>>>>
>>>>>> Best regards
>>>>>>
>>>>>> Holger
>>>>>>
>>>>> Hi, thanks for the report; do you have a QEMU command line that we
>>>>> can
>>>>> use to help reproduce the problem? It's easiest if we can cut libvirt
>>>>> out of the loop.
>>>>>
>>>>> What is the architecture and version of the guest?
>>>>>
>>>>> Lastly, it looks like this worked in our 2.7 release if I'm
>>>>> reading you
>>>>> correctly, so this is a change for the 2.8 release as far as you can
>>>>> tell, right?
>>>>>
>>>>> --js
>>>>>
>>>>>> =====================================================================
>>>>>>
>>>>>>
>>>>>> XML-Declration:
>>>>>>
>>>>>> .
>>>>>> .
>>>>>> .
>>>>>>
>>>>>> <!-- SCSI 2 -->
>>>>>> <controller type='scsi' model='virtio-scsi' index='1'>
>>>>>> <alias name='scsi1'/>
>>>>>> </controller>
>>>>>>
>>>>>> <!-- 2 x LTO5 -->
>>>>>> <hostdev mode='subsystem' type='scsi' managed='no'
>>>>>> rawio='yes'>
>>>>>> <source protocol='iscsi'
>>>>>> name='iqn.2008-09.net.fsc:server.LT260_61003/4'>
>>>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>>>> </source>
>>>>>> <address type='drive' controller='1' bus='0' target='2'
>>>>>> unit='1'/>
>>>>>> </hostdev>
>>>>>>
>>>>>> <hostdev mode='subsystem' type='scsi' managed='no'
>>>>>> rawio='yes'>
>>>>>> <source protocol='iscsi'
>>>>>> name='iqn.2008-09.net.fsc:server.LT260_61003/5'>
>>>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>>>> </source>
>>>>>> <address type='drive' controller='1' bus='0' target='2'
>>>>>> unit='2'/>
>>>>>> </hostdev>
>>>>>>
>>>>>> <!-- Virtual media changer Fujitsu LT260 -->
>>>>>> <hostdev mode='subsystem' type='scsi' managed='no'
>>>>>> rawio='yes'>
>>>>>> <source protocol='iscsi'
>>>>>> name='iqn.2008-09.net.fsc:server.LT260_61003/6'>
>>>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>>>> </source>
>>>>>> <address type='drive' controller='1' bus='0' target='2'
>>>>>> unit='3'/>
>>>>>> </hostdev>
>>>>>>
>>>>>> <!-- 2 x LTO6 (via PLP(LAN-attached library)) -->
>>>>>> <hostdev mode='subsystem' type='scsi' managed='no'
>>>>>> rawio='yes'>
>>>>>> <source protocol='iscsi'
>>>>>> name='iqn.2008-09.net.fsc:server.LT60_61005/3'>
>>>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>>>> </source>
>>>>>> <address type='drive' controller='1' bus='0' target='2'
>>>>>> unit='4'/>
>>>>>> </hostdev>
>>>>>>
>>>>>> <hostdev mode='subsystem' type='scsi' managed='no'
>>>>>> rawio='yes'>
>>>>>> <source protocol='iscsi'
>>>>>> name='iqn.2008-09.net.fsc:server.LT60_61005/4'>
>>>>>> <host name='etcsvms2.abg.fsc.net' port='3260'/>
>>>>>> </source>
>>>>>> <address type='drive' controller='1' bus='0' target='2'
>>>>>> unit='5'/>
>>>>>> </hostdev>
>>>>>> .
>>>>>> .
>>>>>> .
>>>>>>
>>>>>> ===============================================================================
>>>>>>
>>>>>>
>>>>>>
>>>>>> correct behavior/Result inside the VM-Quest together with
>>>>>> QEMU/KVM 2.6.2
>>>>>> / 2.7.0
>>>>>> --
>>>>>> (VCSTCS82:A)IUP1:~ # lsscsi -g
>>>>>> [0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda
>>>>>> /dev/sg0
>>>>>> [3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0
>>>>>> /dev/sg1
>>>>>> [8:0:2:1] tape HP Ultrium 5-SCSI 0001 /dev/st3
>>>>>> /dev/sg6
>>>>>> [8:0:2:2] tape HP Ultrium 5-SCSI 0001 /dev/st2
>>>>>> /dev/sg5
>>>>>> [8:0:2:3] mediumx FUJITSU ETERNUS LT260 6.20 - /dev/sg4
>>>>>> [8:0:2:4] tape HP Ultrium 6-SCSI 23AB /dev/st1
>>>>>> /dev/sg3
>>>>>> [8:0:2:5] tape HP Ultrium 6-SCSI 23AB /dev/st0
>>>>>> /dev/sg2
>>>>>> [11:0:0:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdb
>>>>>> /dev/sg7
>>>>>> [11:0:0:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdh
>>>>>> /dev/sg13
>>>>>> [11:0:0:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdg
>>>>>> /dev/sg12
>>>>>> [11:0:0:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdf
>>>>>> /dev/sg11
>>>>>> [11:0:0:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sde
>>>>>> /dev/sg10
>>>>>> [11:0:0:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdd
>>>>>> /dev/sg9
>>>>>> [11:0:0:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdc
>>>>>> /dev/sg8
>>>>>> [11:0:0:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdi
>>>>>> /dev/sg14
>>>>>> (VCSTCS82:A)IUP1:~ #
>>>>>>
>>>>>>
>>>>>>
>>>>>> Wrong behavior/Result inside the VM-Quest together with QEMU/KVM
>>>>>> 2.8.0-RC4
>>>>>> --
>>>>>> (VCSTCS82:A)IUP1:~ # lsscsi -g
>>>>>> [0:2:0:0] disk FTS PRAID EP420i 4.25 /dev/sda
>>>>>> /dev/sg0
>>>>>> [3:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0
>>>>>> /dev/sg1
>>>>>> [11:0:1:0] disk FUJITSU ETERNUS_DXL 0000 /dev/sdj
>>>>>> /dev/sg10
>>>>>> [11:0:1:2] disk FUJITSU ETERNUS_DXL 0000 /dev/sdp
>>>>>> /dev/sg16
>>>>>> [11:0:1:3] disk FUJITSU ETERNUS_DXL 0000 /dev/sdo
>>>>>> /dev/sg15
>>>>>> [11:0:1:4] disk FUJITSU ETERNUS_DXL 0000 /dev/sdn
>>>>>> /dev/sg14
>>>>>> [11:0:1:5] disk FUJITSU ETERNUS_DXL 0000 /dev/sdm
>>>>>> /dev/sg13
>>>>>> [11:0:1:6] disk FUJITSU ETERNUS_DXL 0000 /dev/sdl
>>>>>> /dev/sg12
>>>>>> [11:0:1:7] disk FUJITSU ETERNUS_DXL 0000 /dev/sdk
>>>>>> /dev/sg11
>>>>>> [11:0:1:15] disk FUJITSU ETERNUS_DXL 0000 /dev/sdq
>>>>>> /dev/sg17
>>>>>> (VCSTCS82:A)IUP1:~ #
>>>>>>
>>>>
>>>> ---
>>>> Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
>>>> https://www.avast.com/antivirus
>>>>
>>>>
>>
>>
>> ---
>> Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
>> https://www.avast.com/antivirus
>>
>>
>
>
>
> ---
> Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
> https://www.avast.com/antivirus
---
Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
https://www.avast.com/antivirus
[-- Attachment #2: iscsi-show.txt --]
[-- Type: text/plain, Size: 8444 bytes --]
Target 61003: iqn.2008-09.net.fsc:server.LT260_61003
System information:
Driver: iscsi
State: ready
I_T nexus information:
I_T nexus: 2
Initiator: iqn.2008-11.org.linux-kvm:042b0268-43ad-4519-b9a4-18b68579c990 alias: none
Connection: 0
IP Address: 172.17.36.64
I_T nexus: 3
Initiator: iqn.2008-11.org.linux-kvm:042b0268-43ad-4519-b9a4-18b68579c990 alias: none
Connection: 0
IP Address: 172.17.36.64
I_T nexus: 4
Initiator: iqn.2008-11.org.linux-kvm:042b0268-43ad-4519-b9a4-18b68579c990 alias: none
Connection: 0
IP Address: 172.17.36.64
I_T nexus: 7
Initiator: iqn.2008-11.org.linux-kvm:042b0268-43ad-4519-b9a4-18b68579c991 alias: none
Connection: 0
IP Address: 172.17.36.64
I_T nexus: 8
Initiator: iqn.2008-11.org.linux-kvm:042b0268-43ad-4519-b9a4-18b68579c991 alias: none
Connection: 0
IP Address: 172.17.36.64
I_T nexus: 9
Initiator: iqn.2008-11.org.linux-kvm:042b0268-43ad-4519-b9a4-18b68579c991 alias: none
Connection: 0
IP Address: 172.17.36.64
LUN information:
LUN: 0
Type: controller
SCSI ID: IET ee4b0000
SCSI SN: beaf610030
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: null
Backing store path: None
Backing store flags:
LUN: 1
Type: tape
SCSI ID: HP Ultrium 5-SCSI
SCSI SN: 61003000
Size: 0 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: ssc
Backing store path: /kvm/CS8200/CST/TAPELIB/LT260_61003/PVs/notape1
Backing store flags:
LUN: 2
Type: tape
SCSI ID: HP Ultrium 5-SCSI
SCSI SN: 61003001
Size: 0 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: ssc
Backing store path: /kvm/CS8200/CST/TAPELIB/LT260_61003/PVs/notape2
Backing store flags:
LUN: 3
Type: tape
SCSI ID: HP Ultrium 5-SCSI
SCSI SN: 61003002
Size: 0 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: ssc
Backing store path: /kvm/CS8200/CST/TAPELIB/LT260_61003/PVs/notape3
Backing store flags:
LUN: 4
Type: tape
SCSI ID: HP Ultrium 5-SCSI
SCSI SN: 61003003
Size: 0 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: ssc
Backing store path: /kvm/CS8200/CST/TAPELIB/LT260_61003/PVs/notape4
Backing store flags:
LUN: 5
Type: tape
SCSI ID: HP Ultrium 5-SCSI
SCSI SN: 61003004
Size: 0 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: ssc
Backing store path: /kvm/CS8200/CST/TAPELIB/LT260_61003/PVs/notape5
Backing store flags:
LUN: 6
Type: changer
SCSI ID: FUJITSU ETERNUS LT260
SCSI SN: 4422
Size: 0 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: rdwr
Backing store path: /kvm/CS8200/CST/TAPELIB/LT260_61003/smc
Backing store flags:
Account information:
ACL information:
ALL
Target 61005: iqn.2008-09.net.fsc:server.LT60_61005
System information:
Driver: iscsi
State: ready
I_T nexus information:
I_T nexus: 1
Initiator: iqn.2008-11.org.linux-kvm:57c6456f-e538-4be9-aeeb-b3b32cd0cf13 alias: none
Connection: 0
IP Address: 172.17.36.64
I_T nexus: 5
Initiator: iqn.2008-11.org.linux-kvm:042b0268-43ad-4519-b9a4-18b68579c990 alias: none
Connection: 0
IP Address: 172.17.36.64
I_T nexus: 6
Initiator: iqn.2008-11.org.linux-kvm:042b0268-43ad-4519-b9a4-18b68579c990 alias: none
Connection: 0
IP Address: 172.17.36.64
I_T nexus: 10
Initiator: iqn.2008-11.org.linux-kvm:042b0268-43ad-4519-b9a4-18b68579c991 alias: none
Connection: 0
IP Address: 172.17.36.64
I_T nexus: 11
Initiator: iqn.2008-11.org.linux-kvm:042b0268-43ad-4519-b9a4-18b68579c991 alias: none
Connection: 0
IP Address: 172.17.36.64
LUN information:
LUN: 0
Type: controller
SCSI ID: IET ee4d0000
SCSI SN: beaf610050
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: null
Backing store path: None
Backing store flags:
LUN: 1
Type: tape
SCSI ID: HP Ultrium 6-SCSI
SCSI SN: HUJ610050
Size: 0 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: ssc
Backing store path: /kvm/CS8200/CST/TAPELIB/LT60_61005/PVs/notape1
Backing store flags:
LUN: 2
Type: tape
SCSI ID: HP Ultrium 6-SCSI
SCSI SN: HUJ610051
Size: 0 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: ssc
Backing store path: /kvm/CS8200/CST/TAPELIB/LT60_61005/PVs/notape2
Backing store flags:
LUN: 3
Type: tape
SCSI ID: HP Ultrium 6-SCSI
SCSI SN: HUJ610052
Size: 0 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: ssc
Backing store path: /kvm/CS8200/CST/TAPELIB/LT60_61005/PVs/notape3
Backing store flags:
LUN: 4
Type: tape
SCSI ID: HP Ultrium 6-SCSI
SCSI SN: HUJ610053
Size: 0 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: ssc
Backing store path: /kvm/CS8200/CST/TAPELIB/LT60_61005/PVs/notape4
Backing store flags:
LUN: 5
Type: changer
SCSI ID: IET ee4d0005
SCSI SN: LTDE65444982_LL0
Size: 0 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: rdwr
Backing store path: /kvm/CS8200/CST/TAPELIB/LT60_61005/smc
Backing store flags:
Account information:
ACL information:
ALL
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4
2016-12-21 4:44 ` Holger Schranz
2016-12-21 11:51 ` Holger Schranz
@ 2016-12-22 6:22 ` Fam Zheng
2016-12-22 12:33 ` Holger Schranz
1 sibling, 1 reply; 12+ messages in thread
From: Fam Zheng @ 2016-12-22 6:22 UTC (permalink / raw)
To: Holger Schranz; +Cc: mueller-ralf, John Snow, qemu-devel
On Wed, 12/21 05:44, Holger Schranz wrote:
> Hi Fam,
>
> meanwhile I have sent the requested QEMU CLI direct to John. Your request
> I will try after the reinstall with the released version.So please wait
> for a while.
I don't see the command line, but looking at the other info, the question to ask
is why guest cannot see the controller.. Maybe it's a driver issue? Do other
types of guest work for you?
Fam
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4
2016-12-22 6:22 ` Fam Zheng
@ 2016-12-22 12:33 ` Holger Schranz
2016-12-22 13:06 ` Fam Zheng
2016-12-22 16:47 ` Paolo Bonzini
0 siblings, 2 replies; 12+ messages in thread
From: Holger Schranz @ 2016-12-22 12:33 UTC (permalink / raw)
To: Fam Zheng; +Cc: mueller-ralf, John Snow, qemu-devel
Hi Fam,
You win !!!
I have installed an RH 7.7 based on kernel 3.10 and a SuSE LEAP 42.2 which
is based on kernel 4.4. Both system see the tape devices and can work.
Than I restart in the same session the VM with SLES11 SP4 (kernel 3.0.101)
and an older RH based on kernel 2.6. This both system can't see the tape
drives.
But all 5 VM guest systems are registered in iscsi and show the UUID of the
guest system.
Please, what should I do as a next step please?
Best regards
Holger
Am 22.12.2016 um 07:22 schrieb Fam Zheng:
> On Wed, 12/21 05:44, Holger Schranz wrote:
>> Hi Fam,
>>
>> meanwhile I have sent the requested QEMU CLI direct to John. Your request
>> I will try after the reinstall with the released version.So please wait
>> for a while.
> I don't see the command line, but looking at the other info, the question to ask
> is why guest cannot see the controller.. Maybe it's a driver issue? Do other
> types of guest work for you?
>
> Fam
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4
2016-12-22 12:33 ` Holger Schranz
@ 2016-12-22 13:06 ` Fam Zheng
2016-12-22 16:47 ` Paolo Bonzini
1 sibling, 0 replies; 12+ messages in thread
From: Fam Zheng @ 2016-12-22 13:06 UTC (permalink / raw)
To: Holger Schranz; +Cc: mueller-ralf, John Snow, qemu-devel
On Thu, 12/22 13:33, Holger Schranz wrote:
> Hi Fam,
>
> You win !!!
>
> I have installed an RH 7.7 based on kernel 3.10 and a SuSE LEAP 42.2 which
> is based on kernel 4.4. Both system see the tape devices and can work.
> Than I restart in the same session the VM with SLES11 SP4 (kernel 3.0.101)
> and an older RH based on kernel 2.6. This both system can't see the tape
> drives.
> But all 5 VM guest systems are registered in iscsi and show the UUID of the
> guest system.
>
> Please, what should I do as a next step please?
Could you post your full qemu command line?
Fam
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4
2016-12-22 12:33 ` Holger Schranz
2016-12-22 13:06 ` Fam Zheng
@ 2016-12-22 16:47 ` Paolo Bonzini
2016-12-22 18:21 ` Holger Schranz
1 sibling, 1 reply; 12+ messages in thread
From: Paolo Bonzini @ 2016-12-22 16:47 UTC (permalink / raw)
To: Holger Schranz, Fam Zheng; +Cc: mueller-ralf, John Snow, qemu-devel
On 22/12/2016 13:33, Holger Schranz wrote:
>
>
> I have installed an RH 7.7 based on kernel 3.10 and a SuSE LEAP 42.2 which
> is based on kernel 4.4. Both system see the tape devices and can work.
> Than I restart in the same session the VM with SLES11 SP4 (kernel 3.0.101)
> and an older RH based on kernel 2.6. This both system can't see the tape
> drives.
> But all 5 VM guest systems are registered in iscsi and show the UUID of the
> guest system.
Does SLES11SP4 support virtio-scsi at all? If they haven't backported
it, the first upstream Linux version with virtio-scsi was 3.4, I think.
Paolo
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4
2016-12-22 16:47 ` Paolo Bonzini
@ 2016-12-22 18:21 ` Holger Schranz
0 siblings, 0 replies; 12+ messages in thread
From: Holger Schranz @ 2016-12-22 18:21 UTC (permalink / raw)
To: Paolo Bonzini, Fam Zheng; +Cc: mueller-ralf, John Snow, qemu-devel
Hi Paolo,
thanks for the hint. In the SLES11 SP4 documentation
virtio-scsi is implemented, but this described SLES11SP4
as a host system not as a VM guest.
I'm totally confused. Why does the guest VM's runs until
version 2.7.0 without any problems (with older and newer
kernel versions)?
May be we have clear the configuration:
The host system we use is a SUSE LEAP 42.2. together with QEMU
2.8.0.
The guest systems are SLES10 - SLES12, RH 2.6.32-504 el6 up to 7.2,
and a lot of others (Debian, Fedora, ...).
Best regards
Holger
Am 22.12.2016 um 17:47 schrieb Paolo Bonzini:
>
> On 22/12/2016 13:33, Holger Schranz wrote:
>>
>> I have installed an RH 7.7 based on kernel 3.10 and a SuSE LEAP 42.2 which
>> is based on kernel 4.4. Both system see the tape devices and can work.
>> Than I restart in the same session the VM with SLES11 SP4 (kernel 3.0.101)
>> and an older RH based on kernel 2.6. This both system can't see the tape
>> drives.
>> But all 5 VM guest systems are registered in iscsi and show the UUID of the
>> guest system.
> Does SLES11SP4 support virtio-scsi at all? If they haven't backported
> it, the first upstream Linux version with virtio-scsi was 3.4, I think.
>
> Paolo
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2016-12-22 18:22 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-12-19 9:05 [Qemu-devel] Strange/wrong behavior with iSCSI Tape devices in QEMU 2.8.0-rc4 Holger Schranz
2016-12-19 17:30 ` John Snow
2016-12-20 16:53 ` Holger Schranz
2016-12-20 23:47 ` Fam Zheng
2016-12-21 4:44 ` Holger Schranz
2016-12-21 11:51 ` Holger Schranz
2016-12-21 12:39 ` Holger Schranz
2016-12-22 6:22 ` Fam Zheng
2016-12-22 12:33 ` Holger Schranz
2016-12-22 13:06 ` Fam Zheng
2016-12-22 16:47 ` Paolo Bonzini
2016-12-22 18:21 ` Holger Schranz
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.