From: Simon Wunderlich <sw@simonwunderlich.de> To: ath10k@lists.infradead.org, ath9k-devel@qca.qualcomm.com Cc: linux-wireless@vger.kernel.org, Ben Greear <greearb@candelatech.com>, Julian Calaby <julian.calaby@gmail.com>, Simon Wunderlich <sw@simonwunderlich.de>, Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Subject: [PATCHv2 1/3] ath9k: Support channels in licensed bands Date: Fri, 17 Mar 2017 17:00:20 +0100 [thread overview] Message-ID: <20170317160020.30991-1-sw@simonwunderlich.de> (raw) In-Reply-To: <096bcee2-a991-eac1-8f4f-d7cf7c34730d@neratec.com> From: Ben Greear <greearb@candelatech.com> Many chips support channels in licensed bands. Add support for those, along with a corresponding kernel config option to disable them by default. Note that these channels are not selectable even if the option has been compiled unless the user modifies the regulatory database to explicitly enable the corresponding channels. NOTE: These channels must not be used in most regulatory domains unless you have a license from the FCC or similar! Signed-off-by: Ben Greear <greearb@candelatech.com> [Hide this support behind a Kconfig option] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> [only use the 20 mhz channels, add 5 ghz, change to 4.9ghz to licensed bands, simplify] Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> --- Changes to PATCHv1: * fix bug reported by Zefir, and simplify patch more --- drivers/net/wireless/ath/ath9k/Kconfig | 20 ++++++++++++++++++++ drivers/net/wireless/ath/ath9k/common-init.c | 15 +++++++++++++++ drivers/net/wireless/ath/ath9k/hw.h | 4 ++++ 3 files changed, 39 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 783a38f1a626..23b8abf4449a 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -116,6 +116,26 @@ config ATH9K_DFS_CERTIFIED developed. At this point enabling this option won't do anything except increase code size. +config ATH9K_LICENSED_CHAN + bool "Support channels in licensed bands" + depends on ATH9K && CFG80211_CERTIFICATION_ONUS + default n + ---help--- + This option enables support for licensed channels on such as + 4.9 GHz (public safety). + + These are PUBLIC SAFETY CHANNELS and MUST NOT BE USED in most + regulatory domains UNLESS YOU HAVE A FULL LICENSE for their use from + your local radio regulator, e.g. the FCC or equivalent. Using these + channels without proper authorisation may result in serious legal + consequences. + + You will also have to build a regulatory database with these channels + enabled to actually use them. + + If you are a distro kernel builder or have any doubt whatsoever about + your legal ability to use these channels, say N. + config ATH9K_DYNACK bool "Atheros ath9k ACK timeout estimation algorithm (EXPERIMENTAL)" depends on ATH9K diff --git a/drivers/net/wireless/ath/ath9k/common-init.c b/drivers/net/wireless/ath/ath9k/common-init.c index 8b4f7fdabf58..3d65dce13048 100644 --- a/drivers/net/wireless/ath/ath9k/common-init.c +++ b/drivers/net/wireless/ath/ath9k/common-init.c @@ -86,6 +86,21 @@ static const struct ieee80211_channel ath9k_5ghz_chantable[] = { CHAN5G(5785, 35), /* Channel 157 */ CHAN5G(5805, 36), /* Channel 161 */ CHAN5G(5825, 37), /* Channel 165 */ + +#ifdef CONFIG_ATH9K_LICENSED_CHAN + /* 4.9Ghz channels, public safety channels, license is required in US + * and most other regulatory domains! + */ + /* 802.11j 4.9 GHz (20 MHz) */ + CHAN5G(4920, 38), /* channel 184 */ + CHAN5G(4940, 39), /* channel 188 */ + CHAN5G(4960, 40), /* channel 192 */ + CHAN5G(4980, 41), /* channel 196 */ + /* 802.11j 5.030 - 5.080 GHz (20 MHz) */ + CHAN5G(5040, 42), /* channel 8 */ + CHAN5G(5060, 43), /* channel 12 */ + CHAN5G(5080, 44), /* channel 16 */ +#endif }; /* Atheros hardware rate code addition for short premble */ diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 9cbca1229bac..2166f644599d 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -73,7 +73,11 @@ #define ATH9K_RSSI_BAD -128 +#ifdef CONFIG_ATH9K_LICENSED_CHAN +#define ATH9K_NUM_CHANNELS 45 +#else #define ATH9K_NUM_CHANNELS 38 +#endif /* Register read/write primitives */ #define REG_WRITE(_ah, _reg, _val) \ -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Simon Wunderlich <sw@simonwunderlich.de> To: ath10k@lists.infradead.org, ath9k-devel@qca.qualcomm.com Cc: Julian Calaby <julian.calaby@gmail.com>, Ben Greear <greearb@candelatech.com>, Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>, linux-wireless@vger.kernel.org, Simon Wunderlich <sw@simonwunderlich.de> Subject: [PATCHv2 1/3] ath9k: Support channels in licensed bands Date: Fri, 17 Mar 2017 17:00:20 +0100 [thread overview] Message-ID: <20170317160020.30991-1-sw@simonwunderlich.de> (raw) In-Reply-To: <096bcee2-a991-eac1-8f4f-d7cf7c34730d@neratec.com> From: Ben Greear <greearb@candelatech.com> Many chips support channels in licensed bands. Add support for those, along with a corresponding kernel config option to disable them by default. Note that these channels are not selectable even if the option has been compiled unless the user modifies the regulatory database to explicitly enable the corresponding channels. NOTE: These channels must not be used in most regulatory domains unless you have a license from the FCC or similar! Signed-off-by: Ben Greear <greearb@candelatech.com> [Hide this support behind a Kconfig option] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> [only use the 20 mhz channels, add 5 ghz, change to 4.9ghz to licensed bands, simplify] Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> --- Changes to PATCHv1: * fix bug reported by Zefir, and simplify patch more --- drivers/net/wireless/ath/ath9k/Kconfig | 20 ++++++++++++++++++++ drivers/net/wireless/ath/ath9k/common-init.c | 15 +++++++++++++++ drivers/net/wireless/ath/ath9k/hw.h | 4 ++++ 3 files changed, 39 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 783a38f1a626..23b8abf4449a 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -116,6 +116,26 @@ config ATH9K_DFS_CERTIFIED developed. At this point enabling this option won't do anything except increase code size. +config ATH9K_LICENSED_CHAN + bool "Support channels in licensed bands" + depends on ATH9K && CFG80211_CERTIFICATION_ONUS + default n + ---help--- + This option enables support for licensed channels on such as + 4.9 GHz (public safety). + + These are PUBLIC SAFETY CHANNELS and MUST NOT BE USED in most + regulatory domains UNLESS YOU HAVE A FULL LICENSE for their use from + your local radio regulator, e.g. the FCC or equivalent. Using these + channels without proper authorisation may result in serious legal + consequences. + + You will also have to build a regulatory database with these channels + enabled to actually use them. + + If you are a distro kernel builder or have any doubt whatsoever about + your legal ability to use these channels, say N. + config ATH9K_DYNACK bool "Atheros ath9k ACK timeout estimation algorithm (EXPERIMENTAL)" depends on ATH9K diff --git a/drivers/net/wireless/ath/ath9k/common-init.c b/drivers/net/wireless/ath/ath9k/common-init.c index 8b4f7fdabf58..3d65dce13048 100644 --- a/drivers/net/wireless/ath/ath9k/common-init.c +++ b/drivers/net/wireless/ath/ath9k/common-init.c @@ -86,6 +86,21 @@ static const struct ieee80211_channel ath9k_5ghz_chantable[] = { CHAN5G(5785, 35), /* Channel 157 */ CHAN5G(5805, 36), /* Channel 161 */ CHAN5G(5825, 37), /* Channel 165 */ + +#ifdef CONFIG_ATH9K_LICENSED_CHAN + /* 4.9Ghz channels, public safety channels, license is required in US + * and most other regulatory domains! + */ + /* 802.11j 4.9 GHz (20 MHz) */ + CHAN5G(4920, 38), /* channel 184 */ + CHAN5G(4940, 39), /* channel 188 */ + CHAN5G(4960, 40), /* channel 192 */ + CHAN5G(4980, 41), /* channel 196 */ + /* 802.11j 5.030 - 5.080 GHz (20 MHz) */ + CHAN5G(5040, 42), /* channel 8 */ + CHAN5G(5060, 43), /* channel 12 */ + CHAN5G(5080, 44), /* channel 16 */ +#endif }; /* Atheros hardware rate code addition for short premble */ diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 9cbca1229bac..2166f644599d 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -73,7 +73,11 @@ #define ATH9K_RSSI_BAD -128 +#ifdef CONFIG_ATH9K_LICENSED_CHAN +#define ATH9K_NUM_CHANNELS 45 +#else #define ATH9K_NUM_CHANNELS 38 +#endif /* Register read/write primitives */ #define REG_WRITE(_ah, _reg, _val) \ -- 2.11.0 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2017-03-17 16:02 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-03-16 15:13 [PATCH 0/3] Channels in licensed bands, noise floor override Simon Wunderlich 2017-03-16 15:13 ` Simon Wunderlich 2017-03-16 15:13 ` [PATCH 1/3] ath9k: Support channels in licensed bands Simon Wunderlich 2017-03-16 15:13 ` Simon Wunderlich 2017-03-17 13:40 ` Zefir Kurtisi 2017-03-17 13:40 ` Zefir Kurtisi 2017-03-17 14:02 ` Simon Wunderlich 2017-03-17 14:02 ` Simon Wunderlich 2017-03-17 16:00 ` Simon Wunderlich [this message] 2017-03-17 16:00 ` [PATCHv2 " Simon Wunderlich 2017-03-16 15:13 ` [PATCH 2/3] ath10k: add support for " Simon Wunderlich 2017-03-16 15:13 ` Simon Wunderlich 2017-03-17 18:49 ` Sebastian Gottschall 2017-03-17 18:49 ` Sebastian Gottschall 2017-03-23 9:00 ` Simon Wunderlich 2017-03-23 9:00 ` Simon Wunderlich 2017-03-16 15:13 ` [PATCH 3/3] ath9k: add noise floor override option Simon Wunderlich 2017-03-16 15:13 ` Simon Wunderlich 2017-03-17 8:48 ` Janusz Dziedzic 2017-03-17 8:48 ` Janusz Dziedzic 2017-03-17 8:55 ` Simon Wunderlich 2017-03-17 8:55 ` Simon Wunderlich 2017-03-17 12:44 ` Janusz Dziedzic 2017-03-17 12:44 ` Janusz Dziedzic
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170317160020.30991-1-sw@simonwunderlich.de \ --to=sw@simonwunderlich.de \ --cc=ath10k@lists.infradead.org \ --cc=ath9k-devel@qca.qualcomm.com \ --cc=greearb@candelatech.com \ --cc=julian.calaby@gmail.com \ --cc=linux-wireless@vger.kernel.org \ --cc=mathias.kretschmer@fit.fraunhofer.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.