All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jerry Hoemann <jerry.hoemann@hpe.com>
To: wim@linux-watchdog.org, linux@roeck-us.net
Cc: linux-watchdog@vger.kernel.org, linux-kernel@vger.kernel.org,
	rwright@hpe.com, maurice.a.saldivar@hpe.com, mingo@kernel.org,
	marcus.folkesson@gmail.com, Jerry Hoemann <jerry.hoemann@hpe.com>
Subject: [PATCH v3 08/11] watchdog/hpwdt: Programable Pretimeout NMI
Date: Thu, 15 Feb 2018 16:43:57 -0700	[thread overview]
Message-ID: <20180215234400.5022-9-jerry.hoemann@hpe.com> (raw)
In-Reply-To: <20180215234400.5022-1-jerry.hoemann@hpe.com>

Make whether or not the hpwdt watchdog delivers a pretimeout NMI
programable by the user.

The underlying iLO hardware is programmable as to whether or not
a pre-timeout NMI is delivered to the system before the iLO resets
the system.  However, the iLO does not allow for programming the
length of time that NMI is delivered before the system is reset.

Hence, in hpwdt_set_pretimeout, val == 0 disables the NMI. Any
non-zero value sets the pretimeout length to what the hardware
supports.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
---
 drivers/watchdog/hpwdt.c | 42 ++++++++++++++++++++++++++++++++++++------
 1 file changed, 36 insertions(+), 6 deletions(-)

diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index da9a04101814..dc0ad20738ed 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -28,12 +28,15 @@
 #define TICKS_TO_SECS(ticks)		((ticks) * 128 / 1000)
 #define HPWDT_MAX_TIMER			TICKS_TO_SECS(65535)
 #define DEFAULT_MARGIN			30
+#define PRETIMEOUT_SEC			9
 
 static unsigned int soft_margin = DEFAULT_MARGIN;	/* in seconds */
-static unsigned int reload;			/* the computed soft_margin */
 static bool nowayout = WATCHDOG_NOWAYOUT;
 #ifdef CONFIG_HPWDT_NMI_DECODING
 static unsigned int allow_kdump = 1;
+static bool pretimeout = 1;
+#else
+static bool pretimeout;
 #endif
 
 static void __iomem *pci_mem_addr;		/* the PCI-memory address */
@@ -55,10 +58,12 @@ static struct watchdog_device hpwdt_dev;
  */
 static int hpwdt_start(struct watchdog_device *dev)
 {
-	reload = SECS_TO_TICKS(dev->timeout);
+	int control = 0x81 | (pretimeout ? 0x4 : 0);
+	int reload = SECS_TO_TICKS(dev->timeout);
 
+	dev_dbg(dev->parent, "start watchdog 0x%08x:0x%02x\n", reload, control);
 	iowrite16(reload, hpwdt_timer_reg);
-	iowrite8(0x85, hpwdt_timer_con);
+	iowrite8(control, hpwdt_timer_con);
 
 	return 0;
 }
@@ -67,6 +72,8 @@ static int hpwdt_stop(struct watchdog_device *dev)
 {
 	unsigned long data;
 
+	dev_dbg(dev->parent, "stop  watchdog\n");
+
 	data = ioread8(hpwdt_timer_con);
 	data &= 0xFE;
 	iowrite8(data, hpwdt_timer_con);
@@ -75,8 +82,9 @@ static int hpwdt_stop(struct watchdog_device *dev)
 
 static int hpwdt_ping(struct watchdog_device *dev)
 {
-	reload = SECS_TO_TICKS(dev->timeout);
+	int reload = SECS_TO_TICKS(dev->timeout);
 
+	dev_dbg(dev->parent, "ping  watchdog 0x%08x\n", reload);
 	iowrite16(reload, hpwdt_timer_reg);
 
 	return 0;
@@ -98,12 +106,21 @@ static int hpwdt_settimeout(struct watchdog_device *dev, unsigned int val)
 }
 
 #ifdef CONFIG_HPWDT_NMI_DECODING	/* { */
+static int hpwdt_set_pretimeout(struct watchdog_device *dev, unsigned int val)
+{
+	if (val && (val != PRETIMEOUT_SEC)) {
+		dev_info(dev->parent, "Setting pretimeout to %d\n", PRETIMEOUT_SEC);
+		val = PRETIMEOUT_SEC;
+	}
+	dev->pretimeout = val;
+	pretimeout = val ? 1 : 0;
+	return 0;
+}
 
 static unsigned int hpwdt_my_nmi(void)
 {
 	return ioread8(hpwdt_nmistat) & 0x6;
 }
-
 /*
  *	NMI Handler
  */
@@ -123,6 +140,9 @@ static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs)
 
 	pr_debug("nmi: ulReason=%d, mynmi=0x%0x\n", ulReason, mynmi);
 
+	if (!pretimeout)
+		return NMI_DONE;
+
 	if (allow_kdump)
 		hpwdt_stop(&hpwdt_dev);
 
@@ -137,7 +157,8 @@ static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs)
 static const struct watchdog_info hpwdt_info = {
 	.options	= WDIOF_SETTIMEOUT    |
 			  WDIOF_KEEPALIVEPING |
-			  WDIOF_MAGICCLOSE,
+			  WDIOF_MAGICCLOSE    |
+			  WDIOF_PRETIMEOUT,
 	.identity	= "HPE iLO2+ HW Watchdog Timer",
 };
 
@@ -291,6 +312,9 @@ static const struct watchdog_ops hpwdt_ops = {
 	.ping		= hpwdt_ping,
 	.set_timeout	= hpwdt_settimeout,
 	.get_timeleft	= hpwdt_gettimeleft,
+#ifdef CONFIG_HPWDT_NMI_DECODING	/* { */
+	.set_pretimeout	= hpwdt_set_pretimeout,
+#endif					/* } */
 };
 
 static struct watchdog_device hpwdt_dev = {
@@ -299,6 +323,9 @@ static struct watchdog_device hpwdt_dev = {
 	.min_timeout	= 1,
 	.max_timeout	= HPWDT_MAX_TIMER,
 	.timeout	= DEFAULT_MARGIN,
+#ifdef CONFIG_HPWDT_NMI_DECODING	/* { */
+	.pretimeout	= PRETIMEOUT_SEC,
+#endif					/* } */
 };
 
 
@@ -317,6 +344,9 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 #ifdef CONFIG_HPWDT_NMI_DECODING	/* { */
 module_param(allow_kdump, int, 0);
 MODULE_PARM_DESC(allow_kdump, "Start a kernel dump after NMI occurs");
+
+module_param(pretimeout, bool, 0);
+MODULE_PARM_DESC(pretimeout, "Watchdog pretimeout enabled");
 #endif					/* } */
 
 module_pci_driver(hpwdt_driver);
-- 
2.13.6

  parent reply	other threads:[~2018-02-15 23:46 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-15 23:43 [PATCH v3 00/11] watchdog/hpwdt: Update driver to use watchdog core Jerry Hoemann
2018-02-15 23:43 ` [PATCH v3 01/11] watchdog/hpwdt: Remove legacy NMI sourcing Jerry Hoemann
2018-02-16  7:22   ` Ingo Molnar
2018-02-17 16:08   ` [v3,01/11] " Guenter Roeck
2018-02-15 23:43 ` [PATCH v3 02/11] watchdog/hpwdt: remove include files no longer needed Jerry Hoemann
2018-02-17 16:10   ` [v3,02/11] " Guenter Roeck
2018-02-15 23:43 ` [PATCH v3 03/11] watchdog/hpwdt: Update nmi_panic message Jerry Hoemann
2018-02-17 16:14   ` [v3,03/11] " Guenter Roeck
2018-02-15 23:43 ` [PATCH v3 04/11] watchdog/hpwdt: white space changes Jerry Hoemann
2018-02-17 16:17   ` [v3,04/11] " Guenter Roeck
2018-02-17 19:32     ` Jerry Hoemann
2018-02-17 20:27       ` Marcus Folkesson
2018-02-17 20:33         ` Jerry Hoemann
2018-02-19 16:46       ` Guenter Roeck
2018-02-20  7:31     ` Philippe Ombredanne
2018-02-15 23:43 ` [PATCH v3 05/11] watchdog/hpwdt: Update Module info Jerry Hoemann
2018-02-17 16:19   ` [v3,05/11] " Guenter Roeck
2018-02-17 20:39     ` Jerry Hoemann
2018-02-15 23:43 ` [PATCH v3 06/11] watchdog/hpwdt: Select WATCHDOG_CORE Jerry Hoemann
2018-02-17 16:21   ` [v3,06/11] " Guenter Roeck
2018-02-17 20:08     ` Jerry Hoemann
2018-02-15 23:43 ` [PATCH v3 07/11] watchdog/hpwdt: Modify to use watchdog core Jerry Hoemann
2018-02-17 16:49   ` [v3,07/11] " Guenter Roeck
2018-02-17 20:51     ` Jerry Hoemann
2018-02-15 23:43 ` Jerry Hoemann [this message]
2018-02-16 20:34   ` [PATCH v3 08/11] watchdog/hpwdt: Programable Pretimeout NMI Guenter Roeck
2018-02-16 23:46     ` Jerry Hoemann
2018-02-16 23:55       ` Guenter Roeck
2018-02-17  1:56         ` Jerry Hoemann
2018-02-17  2:29           ` Guenter Roeck
2018-02-15 23:43 ` [PATCH v3 09/11] watchdog/hpwdt: condition early return of NMI handler on iLO5 Jerry Hoemann
2018-02-15 23:43 ` [PATCH v3 10/11] watchdog/hpwdt: remove allow_kdump module parameter Jerry Hoemann
2018-02-15 23:44 ` [PATCH v3 11/11] watchdog/hpwdt: Update driver version Jerry Hoemann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180215234400.5022-9-jerry.hoemann@hpe.com \
    --to=jerry.hoemann@hpe.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=marcus.folkesson@gmail.com \
    --cc=maurice.a.saldivar@hpe.com \
    --cc=mingo@kernel.org \
    --cc=rwright@hpe.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.