* [PATCH] selinux-testsuite: Add SCTP test support
@ 2018-03-20 17:48 Richard Haines
2018-05-30 20:42 ` Paul Moore
0 siblings, 1 reply; 3+ messages in thread
From: Richard Haines @ 2018-03-20 17:48 UTC (permalink / raw)
To: selinux
The sctp testsuite tests all new sctp SELinux functionality.
Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
---
policy/Makefile | 4 +
policy/test_sctp.te | 159 +++++++
tests/Makefile | 4 +
tests/sctp/Makefile | 13 +
tests/sctp/calipso-flush | 5 +
tests/sctp/calipso-load | 7 +
tests/sctp/cipso-fl-flush | 5 +
tests/sctp/cipso-fl-load | 7 +
tests/sctp/cipso-flush | 5 +
tests/sctp/cipso-load-t1 | 7 +
tests/sctp/cipso-load-t2 | 7 +
tests/sctp/cipso-load-t5 | 7 +
tests/sctp/fb-deny-label-flush | 6 +
tests/sctp/fb-deny-label-load | 7 +
tests/sctp/fb-label-flush | 6 +
tests/sctp/fb-label-load | 8 +
tests/sctp/iptables-flush | 4 +
tests/sctp/iptables-load | 27 ++
tests/sctp/sctp_asconf_params_client.c | 298 +++++++++++++
tests/sctp/sctp_asconf_params_server.c | 236 ++++++++++
tests/sctp/sctp_bind.c | 61 +++
tests/sctp/sctp_bindx.c | 116 +++++
tests/sctp/sctp_client.c | 220 +++++++++
tests/sctp/sctp_common.c | 101 +++++
tests/sctp/sctp_common.h | 27 ++
tests/sctp/sctp_connectx.c | 124 ++++++
tests/sctp/sctp_peeloff_server.c | 260 +++++++++++
tests/sctp/sctp_server.c | 335 ++++++++++++++
tests/sctp/sctp_set_params.c | 205 +++++++++
tests/sctp/sctp_set_peer_addr.c | 414 +++++++++++++++++
tests/sctp/sctp_set_pri_addr.c | 135 ++++++
tests/sctp/test | 791 +++++++++++++++++++++++++++++++++
32 files changed, 3611 insertions(+)
create mode 100644 policy/test_sctp.te
create mode 100644 tests/sctp/Makefile
create mode 100644 tests/sctp/calipso-flush
create mode 100644 tests/sctp/calipso-load
create mode 100644 tests/sctp/cipso-fl-flush
create mode 100644 tests/sctp/cipso-fl-load
create mode 100644 tests/sctp/cipso-flush
create mode 100644 tests/sctp/cipso-load-t1
create mode 100644 tests/sctp/cipso-load-t2
create mode 100644 tests/sctp/cipso-load-t5
create mode 100644 tests/sctp/fb-deny-label-flush
create mode 100644 tests/sctp/fb-deny-label-load
create mode 100644 tests/sctp/fb-label-flush
create mode 100644 tests/sctp/fb-label-load
create mode 100644 tests/sctp/iptables-flush
create mode 100644 tests/sctp/iptables-load
create mode 100644 tests/sctp/sctp_asconf_params_client.c
create mode 100644 tests/sctp/sctp_asconf_params_server.c
create mode 100644 tests/sctp/sctp_bind.c
create mode 100644 tests/sctp/sctp_bindx.c
create mode 100644 tests/sctp/sctp_client.c
create mode 100644 tests/sctp/sctp_common.c
create mode 100644 tests/sctp/sctp_common.h
create mode 100644 tests/sctp/sctp_connectx.c
create mode 100644 tests/sctp/sctp_peeloff_server.c
create mode 100644 tests/sctp/sctp_server.c
create mode 100644 tests/sctp/sctp_set_params.c
create mode 100644 tests/sctp/sctp_set_peer_addr.c
create mode 100644 tests/sctp/sctp_set_pri_addr.c
create mode 100644 tests/sctp/test
diff --git a/policy/Makefile b/policy/Makefile
index 8ed5e46..031429a 100644
--- a/policy/Makefile
+++ b/policy/Makefile
@@ -63,6 +63,10 @@ ifeq ($(shell grep -q nnp_transition $(POLDEV)/include/support/all_perms.spt &&
export M4PARAM += -Dnnp_nosuid_transition_permission_defined
endif
+ifeq ($(shell grep -q corenet_sctp_bind_all_nodes $(POLDEV)/include/kernel/corenetwork.if && echo true),true)
+TARGETS += test_sctp.te
+endif
+
ifeq (x$(DISTRO),$(filter x$(DISTRO),xRHEL4 xRHEL5 xRHEL6))
TARGETS:=$(filter-out test_overlayfs.te test_mqueue.te, $(TARGETS))
endif
diff --git a/policy/test_sctp.te b/policy/test_sctp.te
new file mode 100644
index 0000000..6d43208
--- /dev/null
+++ b/policy/test_sctp.te
@@ -0,0 +1,159 @@
+#
+################# SCTP selinux-testsuite policy module ######################
+#
+
+attribute sctpsocketdomain;
+
+#
+######################## NetLabel labels ############################
+#
+# Fall-back labeling label:
+type netlabel_sctp_peer_t;
+corenet_in_generic_node(netlabel_sctp_peer_t)
+corenet_in_generic_if(netlabel_sctp_peer_t)
+
+# Default label for CIPSO/CALIPSO:
+gen_require(`
+ type netlabel_peer_t;
+')
+
+#
+############### Declare an attribute that will hold all peers ###############
+############### allowed an association ###############
+#
+attribute sctp_assoc_peers;
+
+typeattribute netlabel_peer_t sctp_assoc_peers;
+typeattribute netlabel_sctp_peer_t sctp_assoc_peers;
+allow sctp_assoc_peers sctp_assoc_peers:sctp_socket { association };
+
+#
+##################### SCTP portcon for ports 1024-65535 ######################
+#
+corenet_sctp_bind_all_unreserved_ports(sctpsocketdomain)
+corenet_sctp_connect_all_unreserved_ports(sctpsocketdomain)
+
+#
+################################## Server ###################################
+#
+type test_sctp_server_t;
+domain_type(test_sctp_server_t)
+unconfined_runs_test(test_sctp_server_t)
+typeattribute test_sctp_server_t testdomain;
+typeattribute test_sctp_server_t sctpsocketdomain;
+allow test_sctp_server_t self:sctp_socket create_stream_socket_perms;
+allow test_sctp_server_t netlabel_sctp_peer_t:peer { recv };
+corenet_sctp_bind_all_nodes(test_sctp_server_t)
+corenet_inout_generic_node(test_sctp_server_t)
+corenet_inout_generic_if(test_sctp_server_t)
+
+#
+############################### Client #################################
+#
+type test_sctp_client_t;
+domain_type(test_sctp_client_t)
+unconfined_runs_test(test_sctp_client_t)
+typeattribute test_sctp_client_t testdomain;
+typeattribute test_sctp_client_t sctpsocketdomain;
+allow test_sctp_client_t self:sctp_socket create_stream_socket_perms;
+allow test_sctp_server_t test_sctp_client_t:peer { recv };
+allow test_sctp_client_t test_sctp_server_t:peer { recv };
+allow test_sctp_client_t netlabel_sctp_peer_t:peer { recv };
+corenet_inout_generic_node(test_sctp_client_t)
+corenet_inout_generic_if(test_sctp_client_t)
+
+#
+#################### Deny peer recv permission Client ########################
+#
+type test_sctp_deny_peer_client_t;
+domain_type(test_sctp_deny_peer_client_t)
+unconfined_runs_test(test_sctp_deny_peer_client_t)
+typeattribute test_sctp_deny_peer_client_t testdomain;
+typeattribute test_sctp_deny_peer_client_t sctpsocketdomain;
+allow test_sctp_deny_peer_client_t self:sctp_socket create_stream_socket_perms;
+corenet_inout_generic_node(test_sctp_deny_peer_client_t)
+corenet_inout_generic_if(deny_assoc_sctp_peer_t)
+
+#
+####################### Deny association permission #########################
+#
+
+# Declare this type for NetLabel etc. to allow the packet through the system,
+# however do not allow an association:
+type deny_assoc_sctp_peer_t;
+allow test_sctp_server_t deny_assoc_sctp_peer_t:peer { recv };
+allow test_sctp_client_t deny_assoc_sctp_peer_t:peer {recv };
+corenet_inout_generic_node(deny_assoc_sctp_peer_t)
+corenet_inout_generic_if(deny_assoc_sctp_peer_t)
+
+#
+############################# Connectx #################################
+#
+type test_sctp_connectx_t;
+domain_type(test_sctp_connectx_t)
+unconfined_runs_test(test_sctp_connectx_t)
+typeattribute test_sctp_connectx_t testdomain;
+typeattribute test_sctp_connectx_t sctpsocketdomain;
+allow test_sctp_connectx_t self:sctp_socket create_stream_socket_perms;
+allow test_sctp_server_t test_sctp_connectx_t:peer { recv };
+allow test_sctp_connectx_t test_sctp_server_t:peer { recv };
+corenet_sctp_bind_all_nodes(test_sctp_connectx_t)
+corenet_inout_generic_node(test_sctp_connectx_t)
+corenet_inout_generic_if(test_sctp_connectx_t)
+
+#
+############################## Bindx #####################################
+#
+type test_sctp_bindx_t;
+domain_type(test_sctp_bindx_t)
+unconfined_runs_test(test_sctp_bindx_t)
+typeattribute test_sctp_bindx_t testdomain;
+typeattribute test_sctp_bindx_t sctpsocketdomain;
+allow test_sctp_bindx_t self:sctp_socket create_stream_socket_perms;
+allow test_sctp_server_t test_sctp_bindx_t:peer { recv };
+allow test_sctp_bindx_t test_sctp_server_t:peer { recv };
+corenet_sctp_bind_all_nodes(test_sctp_bindx_t)
+corenet_inout_generic_node(test_sctp_bindx_t)
+corenet_inout_generic_if(test_sctp_bindx_t)
+
+#
+########## SET_PRI_ADDR + SET_PEER ADDR for ASCONF process testing ##########
+#
+type test_sctp_set_peer_addr_t;
+domain_type(test_sctp_set_peer_addr_t)
+unconfined_runs_test(test_sctp_set_peer_addr_t)
+typeattribute test_sctp_set_peer_addr_t testdomain;
+typeattribute test_sctp_set_peer_addr_t sctpsocketdomain;
+allow test_sctp_set_peer_addr_t self:sctp_socket create_stream_socket_perms;
+allow test_sctp_server_t test_sctp_set_peer_addr_t:peer { recv };
+allow test_sctp_set_peer_addr_t test_sctp_server_t:peer { recv };
+corenet_sctp_bind_all_nodes(test_sctp_set_peer_addr_t)
+corenet_inout_generic_node(test_sctp_set_peer_addr_t)
+corenet_inout_generic_if(test_sctp_set_peer_addr_t)
+
+#
+######################### SECMARK-specific policy ############################
+#
+type test_sctp_server_packet_t;
+allow unconfined_t test_sctp_server_packet_t:packet { relabelto };
+allow test_sctp_server_t test_sctp_server_packet_t:packet { send recv };
+allow test_sctp_client_t test_sctp_server_packet_t:packet { send recv };
+
+#
+####### Required for getaddrinfo(3), if_nametoindex(3) type functions ########
+########## when resolving IPv6 link local addresses e.g. addr%<if> ###########
+#
+gen_require(`
+ type sysctl_net_t;
+')
+
+allow sctpsocketdomain proc_net_t:file { read };
+allow sctpsocketdomain sysctl_net_t:dir { search };
+allow sctpsocketdomain self:udp_socket { create };
+allow sctpsocketdomain self:unix_dgram_socket { create ioctl };
+
+#
+############ Allow these domains to be entered from sysadm domain ############
+#
+miscfiles_domain_entry_test_files(sctpsocketdomain)
+userdom_sysadm_entry_spec_domtrans_to(sctpsocketdomain)
diff --git a/tests/Makefile b/tests/Makefile
index f2291b2..4f5a1af 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -23,6 +23,10 @@ ifeq ($(shell grep -q icmp_socket $(POLDEV)/include/support/all_perms.spt && gre
SUBDIRS += extended_socket_class
endif
+ifeq ($(shell grep -q corenet_sctp_bind_all_nodes $(POLDEV)/include/kernel/corenetwork.if && grep -q 1 /sys/fs/selinux/policy_capabilities/extended_socket_class && echo true),true)
+SUBDIRS += sctp
+endif
+
ifeq ($(shell grep -q netlink_iscsi_socket $(POLDEV)/include/support/all_perms.spt && echo true),true)
SUBDIRS += netlink_socket
endif
diff --git a/tests/sctp/Makefile b/tests/sctp/Makefile
new file mode 100644
index 0000000..1debf82
--- /dev/null
+++ b/tests/sctp/Makefile
@@ -0,0 +1,13 @@
+TARGETS = sctp_client sctp_server sctp_bind sctp_bindx sctp_connectx sctp_set_params sctp_set_peer_addr sctp_set_pri_addr sctp_asconf_params_client sctp_asconf_params_server sctp_peeloff_server
+
+DEPS = sctp_common.c sctp_common.h
+CFLAGS ?= -Wall
+
+LDLIBS += -lselinux -lsctp
+
+all: $(TARGETS)
+
+clean:
+ rm -f $(TARGETS)
+
+$(TARGETS): $(DEPS)
diff --git a/tests/sctp/calipso-flush b/tests/sctp/calipso-flush
new file mode 100644
index 0000000..5143962
--- /dev/null
+++ b/tests/sctp/calipso-flush
@@ -0,0 +1,5 @@
+#!/bin/sh
+# Reset NetLabel configuration to unlabeled after CALIPSO/IPv6 tests.
+netlabelctl map del default
+netlabelctl calipso del doi:16
+netlabelctl map add default protocol:unlbl
diff --git a/tests/sctp/calipso-load b/tests/sctp/calipso-load
new file mode 100644
index 0000000..4bb9c7f
--- /dev/null
+++ b/tests/sctp/calipso-load
@@ -0,0 +1,7 @@
+#!/bin/sh
+# Define a doi for testing loopback for CALIPSO/IPv6.
+netlabelctl calipso add pass doi:16
+netlabelctl map del default
+netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
+netlabelctl map add default address:::/0 protocol:unlbl
+netlabelctl map add default address:::1 protocol:calipso,16
diff --git a/tests/sctp/cipso-fl-flush b/tests/sctp/cipso-fl-flush
new file mode 100644
index 0000000..032960d
--- /dev/null
+++ b/tests/sctp/cipso-fl-flush
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+netlabelctl map del default
+netlabelctl cipsov4 del doi:1
+netlabelctl map add default protocol:unlbl
diff --git a/tests/sctp/cipso-fl-load b/tests/sctp/cipso-fl-load
new file mode 100644
index 0000000..3ef85b4
--- /dev/null
+++ b/tests/sctp/cipso-fl-load
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+netlabelctl cipsov4 add local doi:1
+netlabelctl map del default
+netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
+netlabelctl map add default address:::/0 protocol:unlbl
+netlabelctl map add default address:127.0.0.1 protocol:cipsov4,1
diff --git a/tests/sctp/cipso-flush b/tests/sctp/cipso-flush
new file mode 100644
index 0000000..6da5b05
--- /dev/null
+++ b/tests/sctp/cipso-flush
@@ -0,0 +1,5 @@
+#!/bin/sh
+# Reset NetLabel configuration to unlabeled for all after CIPSO/IPv4 tests.
+netlabelctl map del default
+netlabelctl cipsov4 del doi:16
+netlabelctl map add default protocol:unlbl
diff --git a/tests/sctp/cipso-load-t1 b/tests/sctp/cipso-load-t1
new file mode 100644
index 0000000..6e9a161
--- /dev/null
+++ b/tests/sctp/cipso-load-t1
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+netlabelctl cipsov4 add pass doi:16 tags:1
+netlabelctl map del default
+netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
+netlabelctl map add default address:::/0 protocol:unlbl
+netlabelctl map add default address:127.0.0.1 protocol:cipsov4,16
diff --git a/tests/sctp/cipso-load-t2 b/tests/sctp/cipso-load-t2
new file mode 100644
index 0000000..3227ba5
--- /dev/null
+++ b/tests/sctp/cipso-load-t2
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+netlabelctl cipsov4 add pass doi:16 tags:2
+netlabelctl map del default
+netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
+netlabelctl map add default address:::/0 protocol:unlbl
+netlabelctl map add default address:127.0.0.1 protocol:cipsov4,16
diff --git a/tests/sctp/cipso-load-t5 b/tests/sctp/cipso-load-t5
new file mode 100644
index 0000000..661afb8
--- /dev/null
+++ b/tests/sctp/cipso-load-t5
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+netlabelctl cipsov4 add pass doi:16 tags:5
+netlabelctl map del default
+netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
+netlabelctl map add default address:::/0 protocol:unlbl
+netlabelctl map add default address:127.0.0.1 protocol:cipsov4,16
diff --git a/tests/sctp/fb-deny-label-flush b/tests/sctp/fb-deny-label-flush
new file mode 100644
index 0000000..059e0b7
--- /dev/null
+++ b/tests/sctp/fb-deny-label-flush
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+netlabelctl map del default
+netlabelctl map add default protocol:unlbl
+netlabelctl unlbl del interface:lo address:127.0.0.0/8 label:system_u:object_r:netlabel_sctp_peer_t:s0
+netlabelctl unlbl del interface:lo address:::1/128 label:system_u:object_r:deny_assoc_sctp_peer_t:s0
diff --git a/tests/sctp/fb-deny-label-load b/tests/sctp/fb-deny-label-load
new file mode 100644
index 0000000..7c0bd87
--- /dev/null
+++ b/tests/sctp/fb-deny-label-load
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+netlabelctl map del default
+netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
+netlabelctl map add default address:::/0 protocol:unlbl
+netlabelctl unlbl add interface:lo address:127.0.0.0/8 label:system_u:object_r:netlabel_sctp_peer_t:s0
+netlabelctl unlbl add interface:lo address:::1/128 label:system_u:object_r:deny_assoc_sctp_peer_t:s0
diff --git a/tests/sctp/fb-label-flush b/tests/sctp/fb-label-flush
new file mode 100644
index 0000000..13573a8
--- /dev/null
+++ b/tests/sctp/fb-label-flush
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+netlabelctl map del default
+netlabelctl map add default protocol:unlbl
+netlabelctl unlbl del interface:lo address:127.0.0.0/8 label:system_u:object_r:netlabel_sctp_peer_t:s0
+netlabelctl unlbl del interface:lo address:::1/128 label:system_u:object_r:netlabel_sctp_peer_t:s0
diff --git a/tests/sctp/fb-label-load b/tests/sctp/fb-label-load
new file mode 100644
index 0000000..a501515
--- /dev/null
+++ b/tests/sctp/fb-label-load
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+netlabelctl map del default
+netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
+netlabelctl map add default address:::/0 protocol:unlbl
+netlabelctl unlbl add interface:lo address:127.0.0.0/8 label:system_u:object_r:netlabel_sctp_peer_t:s0
+netlabelctl unlbl add interface:lo address:::1/128 label:system_u:object_r:netlabel_sctp_peer_t:s0
+#netlabelctl -p unlbl list
diff --git a/tests/sctp/iptables-flush b/tests/sctp/iptables-flush
new file mode 100644
index 0000000..e74271a
--- /dev/null
+++ b/tests/sctp/iptables-flush
@@ -0,0 +1,4 @@
+#!/bin/sh
+# Flush the security table after IPv4 and IPv6 tests.
+iptables -t security -F
+ip6tables -t security -F
diff --git a/tests/sctp/iptables-load b/tests/sctp/iptables-load
new file mode 100644
index 0000000..9dac576
--- /dev/null
+++ b/tests/sctp/iptables-load
@@ -0,0 +1,27 @@
+#!/bin/sh
+############################ SECMARK IPTABLE ENTRIES ########################
+#
+# Flush the security table first:
+iptables -t security -F
+ip6tables -t security -F
+
+#-------------- INPUT IP Stream --------------------#
+# These rules will replace the above context if sctp ports 1024:1035 are found in the packets:
+iptables -t security -A INPUT -i lo -p sctp -m multiport --port 1024:1035 -j SECMARK --selctx system_u:object_r:test_sctp_server_packet_t:s0
+
+iptables -t security -A INPUT -m state --state ESTABLISHED,RELATED -j CONNSECMARK --save
+
+ip6tables -t security -A INPUT -i lo -p sctp -m multiport --port 1024:1035 -j SECMARK --selctx system_u:object_r:test_sctp_server_packet_t:s0
+
+ip6tables -t security -A INPUT -m state --state ESTABLISHED,RELATED -j CONNSECMARK --save
+
+#-------------- OUTPUT IP Stream --------------------#
+# These rules will replace the above context if sctp ports 1024:1035 are found in the packets:
+iptables -t security -A OUTPUT -o lo -p sctp -m multiport --port 1024:1035 -j SECMARK --selctx system_u:object_r:test_sctp_server_packet_t:s0
+
+iptables -t security -A OUTPUT -m state --state ESTABLISHED,RELATED -j CONNSECMARK --save
+
+ip6tables -t security -A OUTPUT -o lo -p sctp -m multiport --port 1024:1035 -j SECMARK --selctx system_u:object_r:test_sctp_server_packet_t:s0
+
+ip6tables -t security -A OUTPUT -m state --state ESTABLISHED,RELATED -j CONNSECMARK --save
+
diff --git a/tests/sctp/sctp_asconf_params_client.c b/tests/sctp/sctp_asconf_params_client.c
new file mode 100644
index 0000000..2e5acdc
--- /dev/null
+++ b/tests/sctp/sctp_asconf_params_client.c
@@ -0,0 +1,298 @@
+/* This test will allow the server side to add/remove bindx addresses and
+ * inform the client side via ASCONF chunks. It will also allow the server
+ * side to inform the client that the peer primary address is being updated.
+ * The code for checking these parameters are in net/sctp/sm_make_chunk.c
+ * sctp_process_asconf_param().
+ *
+ * To enable the processing of these incoming ASCONF parameters for:
+ * SCTP_PARAM_SET_PRIMARY, SCTP_PARAM_ADD_IP and SCTP_PARAM_DEL_IP
+ * the following options must be enabled:
+ * echo 1 > /proc/sys/net/sctp/addip_enable
+ * echo 1 > /proc/sys/net/sctp/addip_noauth_enable
+ *
+ * If these are not enabled the SCTP_SET_PEER_PRIMARY_ADDR setsockopt
+ * fails with EPERM "Operation not permitted", however the bindx calls
+ * will complete but the client side will not be informed.
+ *
+ * NOTES:
+ * 1) SCTP_SET_PEER_PRIMARY_ADDR requires a non-loopback IP address.
+ * 2) Both addresses used by the client/server MUST be the same type
+ * (i.e. IPv4 or IPv6).
+ * 3) The iptables default for Fedora does not allow SCTP remote traffic.
+ * To allow this set the following:
+ * iptables -I INPUT 1 -p sctp -j ACCEPT
+ * ip6tables -I INPUT 1 -p sctp -j ACCEPT
+ */
+
+#include "sctp_common.h"
+
+static void usage(char *progname)
+{
+ fprintf(stderr,
+ "usage: %s [-v] [-n] addr port\n"
+ "\nWhere:\n\t"
+ "-v Print status information.\n\t"
+ "-n No bindx_rem will be received from server. This happens\n\t"
+ " when the client and server are on different systems.\n\t"
+ "addr IPv4 or IPv6 address (MUST NOT be loopback address).\n\t"
+ "port port.\n", progname);
+
+ fprintf(stderr,
+ "Notes:\n\t"
+ "1) addr and the server side new_pri_addr address MUST be\n\t"
+ " same type (IPv4 or IPv6).\n\t"
+ "2) IPv6 link-local addresses require the %%<if_name> to\n\t"
+ " obtain scopeid. e.g. fe80::7629:afff:fe0f:8e5d%%wlp6s0\n");
+ exit(1);
+}
+
+static int peer_count, peer_count_err;
+static void getpaddrs_alarm(int sig)
+{
+ fprintf(stderr,
+ "Get peer address count timer expired - carry on test\n");
+ peer_count += 1;
+ peer_count_err = true;
+}
+
+static void getprimaddr_alarm(int sig)
+{
+ fprintf(stderr, "Get primary address timer expired - end test.\n");
+ exit(1);
+}
+
+static void get_primaddr(char *addr_buf, int socket)
+{
+ int result;
+ struct sctp_prim prim;
+ struct sockaddr_in *in_addr;
+ struct sockaddr_in6 *in6_addr;
+ struct sockaddr *paddr;
+ socklen_t prim_len;
+ const char *addr_ptr = NULL;
+
+ memset(&prim, 0, sizeof(struct sctp_prim));
+ prim_len = sizeof(struct sctp_prim);
+
+ result = getsockopt(socket, IPPROTO_SCTP, SCTP_PRIMARY_ADDR,
+ &prim, &prim_len);
+ if (result < 0) {
+ perror("getsockopt: SCTP_PRIMARY_ADDR");
+ exit(1);
+ }
+
+ paddr = (struct sockaddr *)&prim.ssp_addr;
+ if (paddr->sa_family == AF_INET) {
+ in_addr = (struct sockaddr_in *)&prim.ssp_addr;
+ addr_ptr = inet_ntop(AF_INET, &in_addr->sin_addr, addr_buf,
+ INET6_ADDRSTRLEN);
+ } else if (paddr->sa_family == AF_INET6) {
+ in6_addr = (struct sockaddr_in6 *)&prim.ssp_addr;
+ addr_ptr = inet_ntop(AF_INET6, &in6_addr->sin6_addr, addr_buf,
+ INET6_ADDRSTRLEN);
+ }
+ if (!addr_ptr) {
+ perror("inet_ntop");
+ exit(1);
+ }
+}
+
+int main(int argc, char **argv)
+{
+ int opt, client_sock, result, len;
+ struct addrinfo client_hints, *client_res;
+ struct sockaddr *paddrs;
+ bool verbose = false, no_bindx_rem = false;
+ char client_prim_addr1[INET6_ADDRSTRLEN];
+ char client_prim_addr2[INET6_ADDRSTRLEN];
+ char buffer[128];
+
+ while ((opt = getopt(argc, argv, "vn")) != -1) {
+ switch (opt) {
+ case 'v':
+ verbose = true;
+ break;
+ case 'n':
+ no_bindx_rem = true;
+ break;
+ default:
+ usage(argv[0]);
+ }
+ }
+
+ if ((argc - optind) != 2)
+ usage(argv[0]);
+
+ /* Set up client side and connect */
+ memset(&client_hints, 0, sizeof(struct addrinfo));
+ client_hints.ai_socktype = SOCK_STREAM;
+ client_hints.ai_protocol = IPPROTO_SCTP;
+ result = getaddrinfo(argv[optind], argv[optind + 1],
+ &client_hints, &client_res);
+ if (result < 0) {
+ fprintf(stderr, "getaddrinfo - client: %s\n",
+ gai_strerror(result));
+ exit(1);
+ }
+
+
+ /* printf("Client scopeID: %d\n",
+ * ((struct sockaddr_in6 *)client_res->ai_addr)->sin6_scope_id);
+ */
+
+ client_sock = socket(client_res->ai_family, client_res->ai_socktype,
+ client_res->ai_protocol);
+ if (client_sock < 0) {
+ perror("socket");
+ exit(1);
+ }
+
+ result = connect(client_sock, client_res->ai_addr,
+ client_res->ai_addrlen);
+ if (result < 0) {
+ if (errno != EINPROGRESS)
+ perror("connect");
+ else
+ fprintf(stderr, "connect timeout\n");
+
+ close(client_sock);
+ exit(1);
+ }
+
+ /* Get number of peer addresses on CLIENT (should be 1) for a check
+ * later as sctp_bindx SERVER -> CLIENT is non-blocking.
+ */
+ peer_count = sctp_getpaddrs(client_sock, 0, &paddrs);
+ sctp_freepaddrs(paddrs);
+ len = sprintf(buffer, "Client peer address count: %d", peer_count);
+ if (verbose)
+ printf("%s\n", buffer);
+
+
+ /* Get initial CLIENT primary address (that should be ADDR1). */
+ get_primaddr(client_prim_addr1, client_sock);
+
+ /* server waiting for write before sending BINDX_ADD */
+ result = write(client_sock, buffer, len);
+ if (result < 0) {
+ perror("write");
+ close(client_sock);
+ exit(1);
+ }
+
+ /* Sleep a while as server pings us the new address */
+ sleep(1);
+ /* then set an alarm and check number of peer addresses for CLIENT */
+ signal(SIGALRM, getpaddrs_alarm);
+ alarm(2);
+ peer_count_err = false;
+ result = 0;
+
+ while (result != peer_count + 1) {
+ result = sctp_getpaddrs(client_sock, 0, &paddrs);
+ if (result > 0)
+ sctp_freepaddrs(paddrs);
+
+ if (peer_count_err)
+ break;
+ }
+ alarm(0);
+ peer_count = result;
+
+ len = sprintf(buffer, "Client peer address count: %d", result);
+ if (verbose)
+ printf("%s\n", buffer);
+
+ /* server waiting for write before send SCTP_SET_PEER_PRIMARY_ADDR */
+ result = write(client_sock, buffer, len);
+ if (result < 0) {
+ perror("write");
+ close(client_sock);
+ exit(1);
+ }
+
+ /* Now get the new primary address from the client */
+ signal(SIGALRM, getprimaddr_alarm);
+ alarm(2);
+ memcpy(client_prim_addr2, client_prim_addr1, INET6_ADDRSTRLEN);
+
+ while (!strcmp(client_prim_addr1, client_prim_addr2))
+ get_primaddr(client_prim_addr2, client_sock);
+
+ alarm(0);
+ len = sprintf(buffer,
+ "Client initial SCTP_PRIMARY_ADDR: %s\nClient current SCTP_PRIMARY_ADDR: %s",
+ client_prim_addr1, client_prim_addr2);
+ if (verbose)
+ printf("%s\n", buffer);
+
+ if (!no_bindx_rem) {
+ /* Let server send bindx_rem */
+ result = write(client_sock, buffer, len);
+ if (result < 0) {
+ perror("write");
+ close(client_sock);
+ exit(1);
+ }
+
+ /* Then delete addr that checks ASCONF - SCTP_PARAM_DEL_IP */
+ if (!peer_count_err) {
+ signal(SIGALRM, getprimaddr_alarm);
+ alarm(2);
+ result = 0;
+ while (result != peer_count - 1) {
+ result = sctp_getpaddrs(client_sock,
+ 0, &paddrs);
+ if (result > 0)
+ sctp_freepaddrs(paddrs);
+
+ if (peer_count_err)
+ break;
+ }
+ alarm(0);
+ sprintf(buffer, "Client peer address count: %d",
+ result);
+ if (verbose)
+ printf("%s\n", buffer);
+ }
+ }
+
+ /* server waiting for client peer address count */
+ result = write(client_sock, buffer, len);
+ if (result < 0) {
+ perror("write");
+ close(client_sock);
+ exit(1);
+ }
+
+ /* Compare the client primary addresses, they should be different. */
+ if (!strcmp(client_prim_addr1, client_prim_addr2)) {
+ len = sprintf(buffer,
+ "Client ADDR1: %s same as ADDR2: %s - SCTP_SET_PEER_PRIMARY_ADDR failed",
+ client_prim_addr1, client_prim_addr2);
+ fprintf(stderr, "%s\n", buffer);
+
+ /* server waiting for write to finish */
+ result = write(client_sock, buffer, len);
+ if (result < 0) {
+ perror("write");
+ close(client_sock);
+ }
+ exit(1);
+ }
+
+ len = sprintf(buffer, "Client primary address changed successfully\n");
+ if (verbose)
+ printf("%s\n", buffer);
+
+ /* server waiting for write to finish */
+ result = write(client_sock, buffer, len);
+ if (result < 0) {
+ perror("write");
+ close(client_sock);
+ exit(1);
+ }
+
+ close(client_sock);
+ exit(0);
+}
diff --git a/tests/sctp/sctp_asconf_params_server.c b/tests/sctp/sctp_asconf_params_server.c
new file mode 100644
index 0000000..f710097
--- /dev/null
+++ b/tests/sctp/sctp_asconf_params_server.c
@@ -0,0 +1,236 @@
+#include "sctp_common.h"
+
+static void usage(char *progname)
+{
+ fprintf(stderr,
+ "usage: %s -v addr new_pri_addr port\n"
+ "\nWhere:\n\t"
+ "-v Print status information.\n\t"
+ "addr IPv4/IPv6 address for initial connection.\n\t"
+ "new_pri_addr IPv4/IPv6 address that the server will bindx\n\t"
+ " then set to the new SCTP_PRIMARY_ADDR.\n\t"
+ "port port.\n", progname);
+ fprintf(stderr,
+ "Notes:\n\t"
+ "1) addr and new_pri_addr MUST NOT be loopback addresses.\n\t"
+ "2) addr and new_pri_addr MUST be same type (IPv4 or IPv6).\n\t"
+ "3) IPv6 link-local addresses require the %%<if_name> to\n\t"
+ " obtain scopeid. e.g. fe80::7629:afff:fe0f:8e5d%%wlp6s0\n");
+ exit(1);
+}
+
+int main(int argc, char **argv)
+{
+ int opt, srv_sock, new_sock, result, on = 1;
+ struct addrinfo srv_hints, *srv_res;
+ struct addrinfo *new_pri_addr_res;
+ struct sockaddr *sa_ptr;
+ socklen_t sinlen;
+ struct sockaddr_storage sin;
+ struct sctp_setpeerprim setpeerprim;
+ bool verbose = false, is_ipv6 = false;
+ char buffer[128];
+
+ while ((opt = getopt(argc, argv, "v")) != -1) {
+ switch (opt) {
+ case 'v':
+ verbose = true;
+ break;
+ default:
+ usage(argv[0]);
+ }
+ }
+
+ if ((argc - optind) != 3)
+ usage(argv[0]);
+
+ if (strchr(argv[optind], ':') && strchr(argv[optind + 1], ':')) {
+ is_ipv6 = true;
+ srv_hints.ai_family = AF_INET6;
+ } else if (strchr(argv[optind], '.') &&
+ strchr(argv[optind + 1], '.')) {
+ is_ipv6 = false;
+ srv_hints.ai_family = AF_INET;
+ } else {
+ usage(argv[0]);
+ }
+
+ memset(&srv_hints, 0, sizeof(struct addrinfo));
+ srv_hints.ai_flags = AI_PASSIVE;
+ srv_hints.ai_socktype = SOCK_STREAM;
+ srv_hints.ai_protocol = IPPROTO_SCTP;
+
+ /* Set up server side */
+ result = getaddrinfo(argv[optind], argv[optind + 2],
+ &srv_hints, &srv_res);
+ if (result < 0) {
+ fprintf(stderr, "getaddrinfo - server: %s\n",
+ gai_strerror(result));
+ exit(1);
+ }
+ if (is_ipv6 && verbose)
+ printf("Server scopeID: %d\n",
+ ((struct sockaddr_in6 *)
+ srv_res->ai_addr)->sin6_scope_id);
+
+ srv_sock = socket(srv_res->ai_family, srv_res->ai_socktype,
+ srv_res->ai_protocol);
+ if (srv_sock < 0) {
+ perror("socket - server");
+ exit(1);
+ }
+
+ result = setsockopt(srv_sock, SOL_SOCKET, SO_REUSEADDR, &on,
+ sizeof(on));
+ if (result < 0) {
+ perror("setsockopt: SO_REUSEADDR");
+ close(srv_sock);
+ exit(1);
+ }
+
+ result = bind(srv_sock, srv_res->ai_addr, srv_res->ai_addrlen);
+ if (result < 0) {
+ perror("bind");
+ close(srv_sock);
+ exit(1);
+ }
+
+ listen(srv_sock, 1);
+
+ new_sock = accept(srv_sock, (struct sockaddr *)&sin, &sinlen);
+ if (new_sock < 0) {
+ perror("accept");
+ result = 1;
+ goto err2;
+ }
+
+ /* This waits for a client message before continuing. */
+ result = read(new_sock, &buffer, sizeof(buffer));
+ if (result < 0) {
+ perror("read");
+ exit(1);
+ }
+ buffer[result] = 0;
+ if (verbose)
+ printf("%s\n", buffer);
+
+ /* Obtain address info for the BINDX_ADD and new SCTP_PRIMARY_ADDR. */
+ result = getaddrinfo(argv[optind + 1], argv[optind + 2],
+ &srv_hints, &new_pri_addr_res);
+ if (result < 0) {
+ fprintf(stderr, "getaddrinfo - new SCTP_PRIMARY_ADDR: %s\n",
+ gai_strerror(result));
+ close(srv_sock);
+ exit(1);
+ }
+ if (is_ipv6 && verbose)
+ printf("new_pri_addr scopeID: %d\n",
+ ((struct sockaddr_in6 *)
+ new_pri_addr_res->ai_addr)->sin6_scope_id);
+
+
+ /* Now call sctp_bindx to add ADDR2, this will cause an
+ * ASCONF - SCTP_PARAM_ADD_IP chunk to be sent to the CLIENT.
+ * This is non-blocking so there maybe a delay before the CLIENT
+ * receives the asconf chunk.
+ */
+ if (verbose)
+ printf("Calling sctp_bindx ADD: %s\n", argv[optind + 1]);
+
+ result = sctp_bindx(new_sock,
+ (struct sockaddr *)new_pri_addr_res->ai_addr,
+ 1, SCTP_BINDX_ADD_ADDR);
+ if (result < 0) {
+ if (errno == EACCES) {
+ perror("sctp_bindx ADD");
+ } else {
+ perror("sctp_bindx ADD");
+ result = 1;
+ goto err1;
+ }
+ }
+
+ /* This waits for a client message before continuing. */
+ result = read(new_sock, &buffer, sizeof(buffer));
+ if (result < 0) {
+ perror("read");
+ exit(1);
+ }
+ buffer[result] = 0;
+ if (verbose)
+ printf("%s\n", buffer);
+
+ /* Now that the CLIENT has the new primary address ensure they use
+ * it by SCTP_SET_PEER_PRIMARY_ADDR.
+ */
+ memset(&setpeerprim, 0, sizeof(struct sctp_setpeerprim));
+ sa_ptr = (struct sockaddr *)&setpeerprim.sspp_addr;
+ if (is_ipv6)
+ memcpy(sa_ptr, new_pri_addr_res->ai_addr,
+ sizeof(struct sockaddr_in6));
+ else
+ memcpy(sa_ptr, new_pri_addr_res->ai_addr,
+ sizeof(struct sockaddr_in));
+
+ if (verbose)
+ printf("Calling setsockopt SCTP_SET_PEER_PRIMARY_ADDR: %s\n",
+ argv[optind + 1]);
+
+ result = setsockopt(new_sock, IPPROTO_SCTP,
+ SCTP_SET_PEER_PRIMARY_ADDR,
+ &setpeerprim, sizeof(struct sctp_setpeerprim));
+ if (result < 0) {
+ perror("setsockopt: SCTP_SET_PEER_PRIMARY_ADDR");
+ result = 1;
+ goto err1;
+ }
+ /* Sleep a sec to ensure client get info. */
+ result = read(new_sock, &buffer, sizeof(buffer));
+ if (result < 0) {
+ perror("read");
+ exit(1);
+ }
+ buffer[result] = 0;
+ if (verbose)
+ printf("%s\n", buffer);
+
+ /* Then delete addr that checks ASCONF - SCTP_PARAM_DEL_IP. */
+ if (verbose)
+ printf("Calling sctp_bindx REM: %s\n", argv[optind]);
+
+ result = sctp_bindx(new_sock, (struct sockaddr *)srv_res->ai_addr,
+ 1, SCTP_BINDX_REM_ADDR);
+ if (result < 0) {
+ perror("sctp_bindx - REM");
+ result = 1;
+ goto err1;
+ }
+
+ result = read(new_sock, &buffer, sizeof(buffer));
+ if (result <= 0) {
+ if (errno != 0)
+ perror("read");
+ result = 1;
+ goto err1;
+ }
+ buffer[result] = 0;
+ if (verbose)
+ printf("%s\n", buffer);
+
+ result = read(new_sock, &buffer, sizeof(buffer));
+ if (result < 0) {
+ perror("read");
+ exit(1);
+ }
+ buffer[result] = 0;
+ if (verbose)
+ printf("%s\n", buffer);
+
+ result = 0;
+
+err1:
+ close(new_sock);
+err2:
+ close(srv_sock);
+ exit(result);
+}
diff --git a/tests/sctp/sctp_bind.c b/tests/sctp/sctp_bind.c
new file mode 100644
index 0000000..5ff00cc
--- /dev/null
+++ b/tests/sctp/sctp_bind.c
@@ -0,0 +1,61 @@
+#include "sctp_common.h"
+
+static void usage(char *progname)
+{
+ fprintf(stderr,
+ "usage: %s stream|seq port\n"
+ "\nWhere:\n\t"
+ "stream Use SCTP 1-to-1 style or:\n\t"
+ "seq use SCTP 1-to-Many style.\n\t"
+ "port Listening port.\n", progname);
+ exit(1);
+}
+
+int main(int argc, char **argv)
+{
+ int sock, result, on = 1;
+ struct addrinfo hints, *res;
+
+ if (argc != 3)
+ usage(argv[0]);
+
+ memset(&hints, 0, sizeof(struct addrinfo));
+ hints.ai_flags = AI_PASSIVE;
+ hints.ai_protocol = IPPROTO_SCTP;
+
+ if (!strcmp(argv[1], "stream"))
+ hints.ai_socktype = SOCK_STREAM;
+ else if (!strcmp(argv[1], "seq"))
+ hints.ai_socktype = SOCK_SEQPACKET;
+ else
+ usage(argv[0]);
+
+ result = getaddrinfo(NULL, argv[2], &hints, &res);
+ if (result < 0) {
+ printf("getaddrinfo: %s\n", gai_strerror(result));
+ exit(1);
+ }
+
+ sock = socket(res->ai_family, res->ai_socktype, res->ai_protocol);
+ if (sock < 0) {
+ perror("socket");
+ exit(1);
+ }
+
+ result = setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on));
+ if (result < 0) {
+ perror("setsockopt: SO_REUSEADDR");
+ close(sock);
+ exit(1);
+ }
+
+ result = bind(sock, res->ai_addr, res->ai_addrlen);
+ if (result < 0) {
+ perror("bind");
+ close(sock);
+ exit(1);
+ }
+
+ close(sock);
+ exit(0);
+}
diff --git a/tests/sctp/sctp_bindx.c b/tests/sctp/sctp_bindx.c
new file mode 100644
index 0000000..7634bab
--- /dev/null
+++ b/tests/sctp/sctp_bindx.c
@@ -0,0 +1,116 @@
+#include "sctp_common.h"
+
+static void usage(char *progname)
+{
+ fprintf(stderr,
+ "usage: %s [-r] [-v] stream|seq port\n"
+ "\nWhere:\n\t"
+ "-r After two bindx ADDs, remove one with bindx REM.\n\t"
+ "-v Print context information.\n\t"
+ " The default is to add IPv4 and IPv6 loopback addrs.\n\t"
+ "stream Use SCTP 1-to-1 style or:\n\t"
+ "seq use SCTP 1-to-Many style.\n\t"
+ "port port.\n", progname);
+ exit(1);
+}
+
+int main(int argc, char **argv)
+{
+ int opt, type, sock, result;
+ struct sockaddr_in ipv4;
+ struct sockaddr_in6 ipv6;
+ unsigned short port;
+ bool rem = false;
+ bool verbose = false;
+ char *context;
+
+ while ((opt = getopt(argc, argv, "rv")) != -1) {
+ switch (opt) {
+ case 'v':
+ verbose = true;
+ break;
+ case 'r':
+ rem = true;
+ break;
+ default:
+ usage(argv[0]);
+ }
+ }
+
+ if ((argc - optind) != 2)
+ usage(argv[0]);
+
+ if (!strcmp(argv[optind], "stream"))
+ type = SOCK_STREAM;
+ else if (!strcmp(argv[optind], "seq"))
+ type = SOCK_SEQPACKET;
+ else
+ usage(argv[0]);
+
+ port = atoi(argv[optind + 1]);
+ if (!port)
+ usage(argv[0]);
+
+ if (verbose) {
+ if (getcon(&context) < 0)
+ context = strdup("unavailable");
+ printf("Process context: %s\n", context);
+ free(context);
+ }
+
+ sock = socket(PF_INET6, type, IPPROTO_SCTP);
+ if (sock < 0) {
+ perror("socket");
+ exit(1);
+ }
+
+ if (verbose)
+ print_context(sock, "Server");
+
+ memset(&ipv4, 0, sizeof(struct sockaddr_in));
+ ipv4.sin_family = AF_INET;
+ ipv4.sin_port = htons(port);
+ ipv4.sin_addr.s_addr = htonl(0x7f000001);
+
+ result = sctp_bindx(sock, (struct sockaddr *)&ipv4, 1,
+ SCTP_BINDX_ADD_ADDR);
+ if (result < 0) {
+ perror("sctp_bindx ADD - ipv4");
+ close(sock);
+ exit(1);
+ }
+
+ if (verbose)
+ printf("sctp_bindx ADD - ipv4\n");
+
+ memset(&ipv6, 0, sizeof(struct sockaddr_in6));
+ ipv6.sin6_family = AF_INET6;
+ ipv6.sin6_port = htons(port);
+ ipv6.sin6_addr = in6addr_loopback;
+
+ result = sctp_bindx(sock, (struct sockaddr *)&ipv6, 1,
+ SCTP_BINDX_ADD_ADDR);
+ if (result < 0) {
+ perror("sctp_bindx ADD - ipv6");
+ close(sock);
+ exit(1);
+ }
+
+ if (verbose)
+ printf("sctp_bindx ADD - ipv6\n");
+
+ if (rem) {
+ result = sctp_bindx(sock, (struct sockaddr *)&ipv6, 1,
+ SCTP_BINDX_REM_ADDR);
+ if (result < 0) {
+ perror("sctp_bindx - REM");
+ close(sock);
+ exit(1);
+ }
+ if (verbose)
+ printf("sctp_bindx REM - ipv6\n");
+ }
+
+ close(sock);
+ exit(0);
+}
diff --git a/tests/sctp/sctp_client.c b/tests/sctp/sctp_client.c
new file mode 100644
index 0000000..595da75
--- /dev/null
+++ b/tests/sctp/sctp_client.c
@@ -0,0 +1,220 @@
+#include "sctp_common.h"
+
+static void usage(char *progname)
+{
+ fprintf(stderr,
+ "usage: %s [-e expected_msg] [-v] [-n] [-x] stream|seq addr port\n"
+ "\nWhere:\n\t"
+
+ "-e Optional expected message from server e.g. \"nopeer\".\n\t"
+ " If not present the client context will be used as a\n\t"
+ " comparison with the servers reply.\n\t"
+ "-n Do NOT call connect(3) or connectx(3).\n\t"
+ "-v Print context and ip options information.\n\t"
+ "-x Use sctp_connectx(3) instead of connect(3).\n\t"
+ "stream Use SCTP 1-to-1 style or:\n\t"
+ "seq use SCTP 1-to-Many style.\n\t"
+ "addr IPv4 or IPv6 address (e.g. 127.0.0.1 or ::1).\n\t"
+ "port Port for accessing server.\n", progname);
+ exit(1);
+}
+
+int main(int argc, char **argv)
+{
+ int opt, sock, result, save_errno;
+ socklen_t opt_len;
+ struct addrinfo hints, *serverinfo;
+ char byte = 0x41, label[1024], *expected = NULL;
+ bool verbose = false, connectx = false, no_connects = false;
+ bool ipv4 = false, expect_ipopt = false;
+ char *context;
+ struct timeval tm;
+
+ while ((opt = getopt(argc, argv, "e:vxmni")) != -1) {
+ switch (opt) {
+ case 'e':
+ expected = optarg;
+ break;
+ case 'i':
+ expect_ipopt = true;
+ break;
+ case 'v':
+ verbose = true;
+ break;
+ case 'n':
+ no_connects = true;
+ break;
+ case 'x':
+ connectx = true;
+ break;
+ default:
+ usage(argv[0]);
+ }
+ }
+
+ if ((argc - optind) != 3)
+ usage(argv[0]);
+
+ memset(&hints, 0, sizeof(struct addrinfo));
+ hints.ai_protocol = IPPROTO_SCTP;
+
+ if (!strcmp(argv[optind], "stream"))
+ hints.ai_socktype = SOCK_STREAM;
+ else if (!strcmp(argv[optind], "seq"))
+ hints.ai_socktype = SOCK_SEQPACKET;
+ else
+ usage(argv[0]);
+
+ if (verbose) {
+ if (getcon(&context) < 0)
+ context = strdup("unavailable");
+ printf("Client process context: %s\n", context);
+ free(context);
+ }
+
+ result = getaddrinfo(argv[optind + 1], argv[optind + 2], &hints,
+ &serverinfo);
+ if (result < 0) {
+ fprintf(stderr, "Client getaddrinfo: %s\n",
+ gai_strerror(result));
+ exit(2);
+ }
+
+ if (serverinfo->ai_family == AF_INET)
+ ipv4 = true;
+
+ sock = socket(serverinfo->ai_family, serverinfo->ai_socktype,
+ serverinfo->ai_protocol);
+ if (sock < 0) {
+ perror("Client socket");
+ exit(3);
+ }
+
+ /*
+ * These timeouts are set to test whether the peer { recv } completes
+ * or not when the permission is denied. These errors will be
+ * returned during testing:
+ * EINPROGRESS - Operation now in progress - SOCK_STREAM
+ * Uses SO_SNDTIMEO when using connect(2) or sctp_connectx(3)
+ * EAGAIN - Resource temporarily unavailable - SOCK_SEQPACKET
+ * Uses SO_RCVTIMEO when NO connects are called.
+ */
+ tm.tv_sec = 2;
+ tm.tv_usec = 0;
+ result = setsockopt(sock, SOL_SOCKET, SO_SNDTIMEO, &tm, sizeof(tm));
+ if (result < 0) {
+ perror("Client setsockopt: SO_SNDTIMEO");
+ exit(4);
+ }
+
+ result = setsockopt(sock, SOL_SOCKET, SO_RCVTIMEO, &tm, sizeof(tm));
+ if (result < 0) {
+ perror("Client setsockopt: SO_RCVTIMEO");
+ exit(5);
+ }
+
+ if (!no_connects) {
+ if (connectx)
+ result = sctp_connectx(sock, serverinfo->ai_addr,
+ 1, NULL);
+ else
+ result = connect(sock, serverinfo->ai_addr,
+ serverinfo->ai_addrlen);
+ if (result < 0) {
+ save_errno = errno;
+ close(sock);
+ perror("Client connect");
+ switch (save_errno) {
+ case EINPROGRESS:
+ exit(6);
+ break;
+ case ENOSPC:
+ exit(7);
+ break;
+ case EACCES:
+ exit(8);
+ break;
+ default:
+ exit(9);
+ }
+ }
+ if (verbose) {
+ print_context(sock, "Client connect");
+ print_ip_option(sock, ipv4, "Client connect");
+ }
+ }
+
+ if (hints.ai_socktype == SOCK_STREAM) {
+
+ result = write(sock, &byte, 1);
+ if (result < 0) {
+ perror("Client write");
+ close(sock);
+ exit(10);
+ }
+ if (verbose)
+ print_context(sock, "Client STREAM write");
+
+ result = read(sock, label, sizeof(label));
+ if (result < 0) {
+ perror("Client read");
+ close(sock);
+ exit(11);
+ }
+ if (verbose) {
+ print_context(sock, "Client STREAM read");
+ print_ip_option(sock, ipv4, "Client STREAM read");
+ }
+ if (expect_ipopt)
+ expected = get_ip_option(sock, ipv4, &opt_len);
+
+ } else { /* hints.ai_socktype == SOCK_SEQPACKET */
+
+ result = sctp_sendmsg(sock, &byte, 1,
+ serverinfo->ai_addr,
+ serverinfo->ai_addrlen,
+ 0, 0, 0, 0, 0);
+ if (result < 0) {
+ perror("Client sctp_sendmsg");
+ close(sock);
+ exit(12);
+ }
+
+ if (verbose) {
+ print_context(sock, "Client SEQPACKET sctp_sendmsg");
+ print_ip_option(sock, ipv4,
+ "Client SEQPACKET sctp_sendmsg");
+ }
+
+ result = sctp_recvmsg(sock, label, sizeof(label),
+ NULL, 0, NULL, NULL);
+ if (result < 0) {
+ perror("Client sctp_recvmsg");
+ close(sock);
+ exit(13);
+ }
+ if (expect_ipopt)
+ expected = get_ip_option(sock, ipv4, &opt_len);
+ }
+
+ label[result] = 0;
+ close(sock);
+
+ if (!expected && !expect_ipopt) {
+ result = getcon(&expected);
+ if (result < 0) {
+ perror("Client getcon");
+ exit(14);
+ }
+ }
+
+ if (strcmp(expected, label)) {
+ fprintf(stderr, "Client expected %s, got %s\n",
+ expected, label);
+ exit(15);
+ } else if (verbose) {
+ printf("Client received %s\n", label);
+ }
+
+ exit(0);
+}
diff --git a/tests/sctp/sctp_common.c b/tests/sctp/sctp_common.c
new file mode 100644
index 0000000..100ab22
--- /dev/null
+++ b/tests/sctp/sctp_common.c
@@ -0,0 +1,101 @@
+#include "sctp_common.h"
+
+void print_context(int fd, char *text)
+{
+ char *context;
+
+ if (fgetfilecon(fd, &context) < 0)
+ context = strdup("unavailable");
+ printf("%s fd context: %s\n", text, context);
+ free(context);
+
+ if (getpeercon(fd, &context) < 0)
+ context = strdup("unavailable");
+ printf("%s peer context: %s\n", text, context);
+ free(context);
+}
+
+void print_addr_info(struct sockaddr *sin, char *text)
+{
+ struct sockaddr_in *addr4;
+ struct sockaddr_in6 *addr6;
+ char addr_str[INET6_ADDRSTRLEN + 1];
+
+ switch (sin->sa_family) {
+ case AF_INET:
+ addr4 = (struct sockaddr_in *)sin;
+ inet_ntop(sin->sa_family,
+ (void *)&addr4->sin_addr,
+ addr_str, INET6_ADDRSTRLEN + 1);
+ printf("%s IPv4 addr %s\n", text, addr_str);
+ break;
+ case AF_INET6:
+ addr6 = (struct sockaddr_in6 *)sin;
+ if (IN6_IS_ADDR_V4MAPPED(&addr6->sin6_addr)) {
+ inet_ntop(AF_INET,
+ (void *)&addr6->sin6_addr.s6_addr32[3],
+ addr_str, INET6_ADDRSTRLEN + 1);
+ printf("%s IPv6->IPv4 MAPPED addr %s\n",
+ text, addr_str);
+ } else {
+ inet_ntop(sin->sa_family,
+ (void *)&addr6->sin6_addr,
+ addr_str, INET6_ADDRSTRLEN + 1);
+ printf("%s IPv6 addr %s\n", text,
+ addr_str);
+ }
+ break;
+ }
+}
+
+char *get_ip_option(int fd, bool ipv4, socklen_t *opt_len)
+{
+ int result, i;
+ unsigned char ip_options[1024];
+ socklen_t len = sizeof(ip_options);
+ char *ip_optbuf;
+
+ if (ipv4)
+ result = getsockopt(fd, IPPROTO_IP, IP_OPTIONS,
+ ip_options, &len);
+ else
+ result = getsockopt(fd, IPPROTO_IPV6, IPV6_HOPOPTS,
+ ip_options, &len);
+
+ if (result < 0) {
+ perror("get ip options error");
+ return NULL;
+ }
+
+ ip_optbuf = calloc(1, len * 2 + 1);
+ if (!ip_optbuf) {
+ perror("get ip options malloc error");
+ return NULL;
+ }
+
+ if (len > 0) {
+ for (i = 0; i < len; i++)
+ sprintf(&ip_optbuf[i * 2], "%02x", ip_options[i]);
+
+ *opt_len = len;
+ return ip_optbuf;
+ }
+
+ return NULL;
+}
+
+void print_ip_option(int fd, bool ipv4, char *text)
+{
+ char *ip_options;
+ socklen_t len;
+
+ ip_options = get_ip_option(fd, ipv4, &len);
+
+ if (ip_options) {
+ printf("%s IP Options Family: %s Length: %d\n\tEntry: %s\n",
+ text, ipv4 ? "IPv4" : "IPv6", len, ip_options);
+ free(ip_options);
+ } else {
+ printf("%s No IP Options set\n", text);
+ }
+}
diff --git a/tests/sctp/sctp_common.h b/tests/sctp/sctp_common.h
new file mode 100644
index 0000000..d5c1397
--- /dev/null
+++ b/tests/sctp/sctp_common.h
@@ -0,0 +1,27 @@
+#ifndef _GNU_SOURCE
+#define _GNU_SOURCE /* For poll(2) POLLRDHUP - Detect client close(2) */
+#endif
+
+#include <arpa/inet.h>
+#include <sys/poll.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <net/if.h>
+#include <netdb.h>
+#include <netinet/in.h>
+#include <netinet/ip.h>
+#include <netinet/sctp.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <errno.h>
+#include <signal.h>
+#include <selinux/selinux.h>
+
+void print_context(int fd, char *text);
+void print_addr_info(struct sockaddr *sin, char *text);
+char *get_ip_option(int fd, bool ipv4, socklen_t *opt_len);
+void print_ip_option(int fd, bool ipv4, char *text);
diff --git a/tests/sctp/sctp_connectx.c b/tests/sctp/sctp_connectx.c
new file mode 100644
index 0000000..18d133d
--- /dev/null
+++ b/tests/sctp/sctp_connectx.c
@@ -0,0 +1,124 @@
+#include "sctp_common.h"
+
+static void usage(char *progname)
+{
+ fprintf(stderr,
+ "usage: %s [-v] stream|seq addr port\n"
+ "\nWhere:\n\t"
+ "-v Print context information.\n\t"
+ "stream Use SCTP 1-to-1 style or:\n\t"
+ "seq use SCTP 1-to-Many style.\n\t"
+ "addr Servers IPv4 or IPv6 address.\n\t"
+ "port port.\n", progname);
+ exit(1);
+}
+
+int main(int argc, char **argv)
+{
+ int opt, type, srv_sock, client_sock, result, on = 1;
+ struct addrinfo srv_hints, client_hints, *srv_res, *client_res;
+ bool verbose = false;
+ char *context;
+
+ while ((opt = getopt(argc, argv, "v")) != -1) {
+ switch (opt) {
+ case 'v':
+ verbose = true;
+ break;
+ default:
+ usage(argv[0]);
+ }
+ }
+
+ if ((argc - optind) != 3)
+ usage(argv[0]);
+
+ if (!strcmp(argv[optind], "stream"))
+ type = SOCK_STREAM;
+ else if (!strcmp(argv[optind], "seq"))
+ type = SOCK_SEQPACKET;
+ else
+ usage(argv[0]);
+
+ if (verbose) {
+ if (getcon(&context) < 0)
+ context = strdup("unavailable");
+ printf("Process context: %s\n", context);
+ free(context);
+ }
+
+ memset(&srv_hints, 0, sizeof(struct addrinfo));
+ srv_hints.ai_flags = AI_PASSIVE;
+ srv_hints.ai_family = AF_INET6;
+
+ srv_hints.ai_socktype = type;
+ srv_hints.ai_protocol = IPPROTO_SCTP;
+
+ /* Set up server side */
+ result = getaddrinfo(NULL, argv[optind + 2], &srv_hints, &srv_res);
+ if (result < 0) {
+ printf("getaddrinfo - server: %s\n", gai_strerror(result));
+ exit(1);
+ }
+
+ srv_sock = socket(srv_res->ai_family, srv_res->ai_socktype,
+ srv_res->ai_protocol);
+ if (srv_sock < 0) {
+ perror("socket - server");
+ exit(1);
+ }
+
+ if (verbose)
+ print_context(srv_sock, "Server");
+
+ result = setsockopt(srv_sock, SOL_SOCKET, SO_REUSEADDR, &on,
+ sizeof(on));
+ if (result < 0) {
+ perror("setsockopt: SO_REUSEADDR");
+ close(srv_sock);
+ exit(1);
+ }
+
+ result = bind(srv_sock, srv_res->ai_addr, srv_res->ai_addrlen);
+ if (result < 0) {
+ perror("bind");
+ close(srv_sock);
+ exit(1);
+ }
+
+ listen(srv_sock, 1);
+
+ /* Set up client side */
+ memset(&client_hints, 0, sizeof(struct addrinfo));
+ client_hints.ai_socktype = type;
+ client_hints.ai_protocol = IPPROTO_SCTP;
+ result = getaddrinfo(argv[optind + 1], argv[optind + 2],
+ &client_hints, &client_res);
+ if (result < 0) {
+ fprintf(stderr, "getaddrinfo - client: %s\n",
+ gai_strerror(result));
+ exit(1);
+ }
+
+ client_sock = socket(client_res->ai_family, client_res->ai_socktype,
+ client_res->ai_protocol);
+ if (client_sock < 0) {
+ perror("socket - client");
+ exit(1);
+ }
+
+ if (verbose)
+ print_context(client_sock, "Client");
+
+ result = sctp_connectx(client_sock, client_res->ai_addr, 1, NULL);
+ if (result < 0) {
+ perror("connectx");
+ close(srv_sock);
+ close(client_sock);
+ exit(1);
+ }
+
+ close(srv_sock);
+ close(client_sock);
+ exit(0);
+}
diff --git a/tests/sctp/sctp_peeloff_server.c b/tests/sctp/sctp_peeloff_server.c
new file mode 100644
index 0000000..eb198af
--- /dev/null
+++ b/tests/sctp/sctp_peeloff_server.c
@@ -0,0 +1,260 @@
+#include "sctp_common.h"
+
+static void usage(char *progname)
+{
+ fprintf(stderr,
+ "usage: %s [-4] [-i] [-n] [-v] port\n"
+ "\nWhere:\n\t"
+ "-4 Listen on IPv4 addresses only.\n\t"
+ "-i Send IP Options as msg (default is peer label).\n\t"
+ "-n No peer context will be available therefore send\n\t"
+ " \"nopeer\" message to client, otherwise the peer context\n\t"
+ " will be retrieved and sent to client.\n\t"
+ "-v Print context and ip options information.\n\t"
+ "port Listening port.\n", progname);
+ exit(1);
+}
+
+static void set_subscr_events(int fd, int value)
+{
+ int result;
+ struct sctp_event_subscribe subscr_events;
+
+ memset(&subscr_events, 0, sizeof(subscr_events));
+ subscr_events.sctp_association_event = value;
+ /* subscr_events.sctp_data_io_event = value; */
+
+ result = setsockopt(fd, IPPROTO_SCTP, SCTP_EVENTS,
+ &subscr_events, sizeof(subscr_events));
+ if (result < 0) {
+ perror("Server setsockopt: SCTP_EVENTS");
+ close(fd);
+ exit(1);
+ }
+}
+
+static sctp_assoc_t handle_event(void *buf)
+{
+ union sctp_notification *snp = buf;
+ struct sctp_assoc_change *sac;
+
+ switch (snp->sn_header.sn_type) {
+ case SCTP_ASSOC_CHANGE:
+ sac = &snp->sn_assoc_change;
+ return sac->sac_assoc_id;
+ case SCTP_PEER_ADDR_CHANGE:
+ case SCTP_SEND_FAILED:
+ case SCTP_REMOTE_ERROR:
+ case SCTP_SHUTDOWN_EVENT:
+ case SCTP_PARTIAL_DELIVERY_EVENT:
+ case SCTP_ADAPTATION_INDICATION:
+ case SCTP_AUTHENTICATION_INDICATION:
+ case SCTP_SENDER_DRY_EVENT:
+ printf("Unrequested event: %x\n", snp->sn_header.sn_type);
+ break;
+ default:
+ printf("Unknown event: %x\n", snp->sn_header.sn_type);
+ break;
+ }
+ return -1;
+}
+
+int main(int argc, char **argv)
+{
+ int opt, sock, result, peeloff_sk = 0, flags, on = 1;
+ sctp_assoc_t assoc_id;
+ socklen_t sinlen, opt_len;
+ struct sockaddr_storage sin;
+ struct addrinfo hints, *res;
+ char *peerlabel, *context, msglabel[256];
+ bool nopeer = false, verbose = false, ipv4 = false, snd_opt = false;
+ unsigned short port;
+
+ while ((opt = getopt(argc, argv, "4inv")) != -1) {
+ switch (opt) {
+ case '4':
+ ipv4 = true;
+ break;
+ case 'i':
+ snd_opt = true;
+ break;
+ case 'n':
+ nopeer = true;
+ break;
+ case 'v':
+ verbose = true;
+ break;
+ default:
+ usage(argv[0]);
+ }
+ }
+
+ if ((argc - optind) != 1)
+ usage(argv[0]);
+
+ port = atoi(argv[optind]);
+ if (!port)
+ usage(argv[0]);
+
+ memset(&hints, 0, sizeof(struct addrinfo));
+ hints.ai_flags = AI_PASSIVE;
+ hints.ai_protocol = IPPROTO_SCTP;
+
+ if (ipv4)
+ hints.ai_family = AF_INET;
+ else
+ hints.ai_family = AF_INET6;
+
+ /* sctp_peeloff(3) must be from 1 to Many style socket */
+ hints.ai_socktype = SOCK_SEQPACKET;
+
+ if (verbose) {
+ if (getcon(&context) < 0)
+ context = strdup("unavailable");
+ printf("Server process context: %s\n", context);
+ free(context);
+ }
+
+ result = getaddrinfo(NULL, argv[optind], &hints, &res);
+ if (result < 0) {
+ fprintf(stderr, "Server getaddrinfo: %s\n",
+ gai_strerror(result));
+ exit(1);
+ }
+
+ sock = socket(res->ai_family, res->ai_socktype, res->ai_protocol);
+ if (sock < 0) {
+ perror("Server socket");
+ exit(1);
+ }
+
+ result = setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on));
+ if (result < 0) {
+ perror("Server setsockopt: SO_REUSEADDR");
+ close(sock);
+ exit(1);
+ }
+
+ result = bind(sock, res->ai_addr, res->ai_addrlen);
+ if (result < 0) {
+ perror("Server bind");
+ close(sock);
+ exit(1);
+ }
+
+ if (verbose)
+ print_context(sock, "Server LISTEN sock");
+
+ if (listen(sock, SOMAXCONN)) {
+ perror("Server listen");
+ close(sock);
+ exit(1);
+ }
+
+ do {
+ set_subscr_events(sock, 1); /* Get assoc_id for sctp_peeloff() */
+ sinlen = sizeof(sin);
+ flags = 0;
+
+ result = sctp_recvmsg(sock, msglabel, sizeof(msglabel),
+ (struct sockaddr *)&sin, &sinlen,
+ NULL, &flags);
+ if (result < 0) {
+ perror("Server sctp_recvmsg-1");
+ close(sock);
+ exit(1);
+ }
+
+ if (verbose)
+ print_addr_info((struct sockaddr *)&sin,
+ "Server SEQPACKET recvmsg");
+
+ if (flags & MSG_NOTIFICATION && flags & MSG_EOR) {
+ assoc_id = handle_event(msglabel);
+ if (assoc_id <= 0) {
+ printf("Server Invalid association ID: %d\n",
+ assoc_id);
+ close(sock);
+ exit(1);
+ }
+ /* No more notifications */
+ set_subscr_events(sock, 0);
+
+ peeloff_sk = sctp_peeloff(sock, assoc_id);
+ if (peeloff_sk < 0) {
+ perror("Server sctp_peeloff");
+ close(sock);
+ exit(1);
+ }
+ if (verbose) {
+ printf("Server sctp_peeloff(3) on sk: %d with association ID: %d\n",
+ peeloff_sk, assoc_id);
+ print_context(peeloff_sk, "Server PEELOFF");
+ }
+
+ /* Now get the client msg on peeloff socket */
+ result = sctp_recvmsg(peeloff_sk, msglabel, sizeof(msglabel),
+ (struct sockaddr *)&sin, &sinlen,
+ NULL, &flags);
+ if (result < 0) {
+ perror("Server sctp_recvmsg-2");
+ close(peeloff_sk);
+ close(sock);
+ exit(1);
+ }
+
+ if (verbose)
+ print_addr_info((struct sockaddr *)&sin,
+ "Server SEQPACKET peeloff recvmsg");
+ } else {
+ printf("Invalid sctp_recvmsg response FLAGS: %x\n",
+ flags);
+ close(peeloff_sk);
+ close(sock);
+ exit(1);
+ }
+
+ if (nopeer) {
+ peerlabel = strdup("nopeer");
+ } else if (snd_opt) {
+ peerlabel = get_ip_option(sock, ipv4, &opt_len);
+
+ if (!peerlabel)
+ peerlabel = strdup("no_ip_options");
+ } else {
+ result = getpeercon(peeloff_sk, &peerlabel);
+ if (result < 0) {
+ perror("Server getpeercon");
+ close(sock);
+ close(peeloff_sk);
+ exit(1);
+ }
+ }
+
+ printf("Server PEELOFF %s: %s\n",
+ snd_opt ? "sock_opt" : "peer label", peerlabel);
+
+ result = sctp_sendmsg(peeloff_sk, peerlabel,
+ strlen(peerlabel),
+ (struct sockaddr *)&sin,
+ sinlen, 0, 0, 0, 0, 0);
+ if (result < 0) {
+ perror("Server sctp_sendmsg");
+ close(peeloff_sk);
+ close(sock);
+ exit(1);
+ }
+
+ if (verbose)
+ printf("Server PEELOFF sent: %s\n", peerlabel);
+
+ free(peerlabel);
+
+
+
+ close(peeloff_sk);
+ } while (1);
+
+ close(sock);
+ exit(0);
+}
diff --git a/tests/sctp/sctp_server.c b/tests/sctp/sctp_server.c
new file mode 100644
index 0000000..a119f2d
--- /dev/null
+++ b/tests/sctp/sctp_server.c
@@ -0,0 +1,335 @@
+#include "sctp_common.h"
+
+static void usage(char *progname)
+{
+ fprintf(stderr,
+ "usage: %s [-4] [-b ipv4_addr] [-h addr] [-i] [-n] [-v] stream|seq port\n"
+ "\nWhere:\n\t"
+ "-4 Listen on IPv4 addresses only (used for CIPSO tests).\n\t"
+ "-b Call sctp_bindx(3) with the supplied IPv4 address.\n\t"
+ "-h IPv4 or IPv6 listen address. If IPv6 link-local address,\n\t"
+ " then requires the %%<if_name> to obtain scopeid. e.g.\n\t"
+ " fe80::7629:afff:fe0f:8e5d%%wlp6s0\n\t"
+ "-i Send IP Options as msg (default is peer label).\n\t"
+ "-n No peer label or IP option will be available therefore\n\t"
+ " send \"nopeer\" message to client.\n\t"
+ "-v Print context and ip options information.\n\t"
+ "stream Use SCTP 1-to-1 style or:\n\t"
+ "seq use SCTP 1-to-Many style.\n\t"
+ "port Listening port.\n", progname);
+ exit(1);
+}
+
+int main(int argc, char **argv)
+{
+ int opt, sock, newsock, result, flags, if_index = 0, on = 1;
+ socklen_t sinlen, opt_len;
+ struct sockaddr_storage sin;
+ struct addrinfo hints, *res;
+ struct sctp_sndrcvinfo sinfo;
+ struct pollfd poll_fd;
+ char getsockopt_peerlabel[1024];
+ char byte, *peerlabel, msglabel[1024], if_name[30];
+ bool nopeer = false, verbose = false, ipv4 = false, snd_opt = false;
+ char *context, *host_addr = NULL, *bindx_addr = NULL;
+ struct sockaddr_in ipv4_addr;
+ unsigned short port;
+
+ while ((opt = getopt(argc, argv, "4b:h:inv")) != -1) {
+ switch (opt) {
+ case '4':
+ ipv4 = true;
+ break;
+ case 'b':
+ bindx_addr = optarg;
+ break;
+ case 'h':
+ host_addr = optarg;
+ break;
+ case 'i':
+ snd_opt = true;
+ break;
+ case 'n':
+ nopeer = true;
+ break;
+ case 'v':
+ verbose = true;
+ break;
+ default:
+ usage(argv[0]);
+ }
+ }
+
+ if ((argc - optind) != 2)
+ usage(argv[0]);
+
+ port = atoi(argv[optind + 1]);
+ if (!port)
+ usage(argv[0]);
+
+ memset(&hints, 0, sizeof(struct addrinfo));
+ hints.ai_flags = AI_PASSIVE;
+ hints.ai_protocol = IPPROTO_SCTP;
+
+ if (ipv4)
+ hints.ai_family = AF_INET;
+ else
+ hints.ai_family = AF_INET6;
+
+ if (!strcmp(argv[optind], "stream"))
+ hints.ai_socktype = SOCK_STREAM;
+ else if (!strcmp(argv[optind], "seq"))
+ hints.ai_socktype = SOCK_SEQPACKET;
+ else
+ usage(argv[0]);
+
+ if (verbose) {
+ if (getcon(&context) < 0)
+ context = strdup("unavailable");
+ printf("Server process context: %s\n", context);
+ free(context);
+ }
+
+ if (host_addr) {
+ char *ptr;
+
+ ptr = strpbrk(host_addr, "%");
+ if (ptr)
+ strcpy(if_name, ptr + 1);
+
+ if_index = if_nametoindex(if_name);
+ if (!if_index) {
+ perror("Server if_nametoindex");
+ exit(1);
+ }
+
+ result = getaddrinfo(host_addr, argv[optind + 1],
+ &hints, &res);
+
+ } else {
+ result = getaddrinfo(NULL, argv[optind + 1], &hints, &res);
+ }
+
+ if (result < 0) {
+ fprintf(stderr, "Server getaddrinfo: %s\n",
+ gai_strerror(result));
+ exit(1);
+ }
+
+ sock = socket(res->ai_family, res->ai_socktype, res->ai_protocol);
+ if (sock < 0) {
+ perror("Server socket");
+ exit(1);
+ }
+
+ result = setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on));
+ if (result < 0) {
+ perror("Server setsockopt: SO_REUSEADDR");
+ close(sock);
+ exit(1);
+ }
+
+ /* Enables sctp_data_io_events for sctp_recvmsg(3) for assoc_id. */
+ result = setsockopt(sock, SOL_SCTP, SCTP_EVENTS, &on, sizeof(on));
+ if (result < 0) {
+ perror("Server setsockopt: SCTP_EVENTS");
+ close(sock);
+ exit(1);
+ }
+
+ if (bindx_addr) {
+ memset(&ipv4_addr, 0, sizeof(struct sockaddr_in));
+ ipv4_addr.sin_family = AF_INET;
+ ipv4_addr.sin_port = htons(port);
+ ipv4_addr.sin_addr.s_addr = inet_addr(bindx_addr);
+
+ result = sctp_bindx(sock, (struct sockaddr *)&ipv4_addr, 1,
+ SCTP_BINDX_ADD_ADDR);
+ if (result < 0) {
+ perror("Server sctp_bindx ADD - ipv4");
+ close(sock);
+ exit(1);
+ }
+ } else {
+ result = bind(sock, res->ai_addr, res->ai_addrlen);
+ if (result < 0) {
+ perror("Server bind");
+ close(sock);
+ exit(1);
+ }
+ }
+
+ if (verbose) {
+ print_context(sock, "Server LISTEN");
+ print_ip_option(sock, ipv4, "Server LISTEN");
+ }
+
+ if (listen(sock, SOMAXCONN)) {
+ perror("Server listen");
+ close(sock);
+ exit(1);
+ }
+
+ if (hints.ai_socktype == SOCK_STREAM) {
+ if (verbose)
+ print_context(sock, "Server STREAM");
+
+ do {
+ socklen_t labellen = sizeof(getsockopt_peerlabel);
+
+ sinlen = sizeof(sin);
+
+ newsock = accept(sock, (struct sockaddr *)&sin,
+ &sinlen);
+ if (newsock < 0) {
+ perror("Server accept");
+ close(sock);
+ exit(1);
+ }
+
+ if (verbose) {
+ print_context(newsock,
+ "Server STREAM accept on newsock");
+ print_addr_info((struct sockaddr *)&sin,
+ "Server connected to Client");
+ print_ip_option(newsock, ipv4,
+ "Server STREAM accept on newsock");
+ }
+
+ if (nopeer) {
+ peerlabel = strdup("nopeer");
+ } else if (snd_opt) {
+ peerlabel = get_ip_option(newsock, ipv4,
+ &opt_len);
+ if (!peerlabel)
+ peerlabel = strdup("no_ip_options");
+ } else {
+ result = getpeercon(newsock, &peerlabel);
+ if (result < 0) {
+ perror("Server getpeercon");
+ close(sock);
+ close(newsock);
+ exit(1);
+ }
+
+ /* Also test the getsockopt version */
+ result = getsockopt(newsock, SOL_SOCKET,
+ SO_PEERSEC,
+ getsockopt_peerlabel,
+ &labellen);
+ if (result < 0) {
+ perror("Server getsockopt: SO_PEERSEC");
+ close(sock);
+ close(newsock);
+ exit(1);
+ }
+ if (verbose)
+ printf("Server STREAM SO_PEERSEC peer label: %s\n",
+ getsockopt_peerlabel);
+ }
+ printf("Server STREAM %s: %s\n",
+ snd_opt ? "sock_opt" : "peer label", peerlabel);
+
+ result = read(newsock, &byte, 1);
+ if (result < 0) {
+ perror("Server read");
+ close(sock);
+ close(newsock);
+ exit(1);
+ }
+
+ result = write(newsock, peerlabel, strlen(peerlabel));
+ if (result < 0) {
+ perror("Server write");
+ close(sock);
+ close(newsock);
+ exit(1);
+ }
+
+ if (verbose)
+ printf("Server STREAM sent: %s\n", peerlabel);
+
+ free(peerlabel);
+
+ /* Let the client close the connection first as this
+ * will stop OOTB chunks if newsock closed early.
+ */
+ poll_fd.fd = newsock;
+ poll_fd.events = POLLRDHUP;
+ poll_fd.revents = 1;
+ result = poll(&poll_fd, 1, 1000);
+ if (verbose && result == 1)
+ printf("Server STREAM: Client closed connection\n");
+ else if (verbose && result == 0)
+ printf("Server: poll(2) timed out - OKAY\n");
+ else if (result < 0)
+ perror("Server - poll");
+
+ close(newsock);
+ } while (1);
+ } else { /* hints.ai_socktype == SOCK_SEQPACKET */
+ if (verbose)
+ print_context(sock, "Server SEQPACKET sock");
+
+ do {
+ sinlen = sizeof(sin);
+
+ result = sctp_recvmsg(sock, msglabel, sizeof(msglabel),
+ (struct sockaddr *)&sin, &sinlen,
+ &sinfo, &flags);
+ if (result < 0) {
+ perror("Server sctp_recvmsg");
+ close(sock);
+ exit(1);
+ }
+
+ if (verbose) {
+ print_context(sock, "Server SEQPACKET recvmsg");
+ print_addr_info((struct sockaddr *)&sin,
+ "Server SEQPACKET recvmsg");
+ print_ip_option(sock, ipv4,
+ "Server SEQPACKET recvmsg");
+ }
+
+ if (nopeer) {
+ peerlabel = strdup("nopeer");
+ } else if (snd_opt) {
+ peerlabel = get_ip_option(sock, ipv4, &opt_len);
+
+ if (!peerlabel)
+ peerlabel = strdup("no_ip_options");
+ } else {
+ result = getpeercon(sock, &peerlabel);
+ if (result < 0) {
+ perror("Server getpeercon");
+ close(sock);
+ exit(1);
+ }
+ }
+ printf("Server SEQPACKET %s: %s\n",
+ snd_opt ? "sock_opt" : "peer label", peerlabel);
+
+ if (sin.ss_family == AF_INET6 && host_addr)
+ ((struct sockaddr_in6 *)&sin)->sin6_scope_id = if_index;
+
+ result = sctp_sendmsg(sock, peerlabel,
+ strlen(peerlabel),
+ (struct sockaddr *)&sin,
+ sinlen, 0, 0, 0, 0, 0);
+ if (result < 0) {
+ perror("Server sctp_sendmsg");
+ close(sock);
+ exit(1);
+ }
+
+ if (verbose)
+ printf("Server SEQPACKET sent: %s\n",
+ peerlabel);
+
+ free(peerlabel);
+ } while (1);
+ }
+
+ close(sock);
+ exit(0);
+}
diff --git a/tests/sctp/sctp_set_params.c b/tests/sctp/sctp_set_params.c
new file mode 100644
index 0000000..d4914bb
--- /dev/null
+++ b/tests/sctp/sctp_set_params.c
@@ -0,0 +1,205 @@
+#include "sctp_common.h"
+
+static void usage(char *progname)
+{
+ fprintf(stderr,
+ "usage: %s [-v] [-o aci|pap|pat] stream|seq addr port\n"
+ "\nWhere:\n\t"
+ "-v Print information.\n\t"
+ "-o Test setsockoption(3) using one of the following\n\t"
+ " options:\n\t\t"
+ " aci = SCTP_ASSOCINFO\n\t\t"
+ " pap = SCTP_PEER_ADDR_PARAMS\n\t\t"
+ " pat = SCTP_PEER_ADDR_THLDS\n\t\t"
+ "stream SCTP 1-to-1 style or:\n\t"
+ "seq SCTP 1-to-Many style.\n\t"
+ "addr Servers IPv4 or IPv6 address.\n\t"
+ "port port.\n", progname);
+ exit(1);
+}
+
+/* Test set_param permission for SCTP_ASSOCINFO */
+static void sctp_associnfo(int sk, int option)
+{
+ int result;
+ socklen_t len;
+ struct sctp_assocparams assocparams;
+
+ memset(&assocparams, 0, sizeof(struct sctp_assocparams));
+
+ len = sizeof(struct sctp_assocparams);
+ result = getsockopt(sk, IPPROTO_SCTP, option, &assocparams, &len);
+ if (result < 0) {
+ perror("getsockopt: SCTP_ASSOCINFO");
+ close(sk);
+ exit(1);
+ }
+
+ assocparams.sasoc_asocmaxrxt += 5;
+ assocparams.sasoc_cookie_life += 15;
+
+ result = setsockopt(sk, IPPROTO_SCTP, option, &assocparams, len);
+ if (result < 0) {
+ perror("setsockopt: SCTP_ASSOCINFO");
+ close(sk);
+ exit(1);
+ }
+}
+
+
+/* Test set_param permission for SCTP_PEER_ADDR_PARAMS */
+static void sctp_peer_addr_params(int sk, int option)
+{
+ int result;
+ struct sctp_paddrparams heartbeat;
+
+ memset(&heartbeat, 0, sizeof(struct sctp_paddrparams));
+ heartbeat.spp_flags = SPP_HB_ENABLE;
+ heartbeat.spp_hbinterval = 100;
+ heartbeat.spp_pathmaxrxt = 1;
+
+ result = setsockopt(sk, IPPROTO_SCTP, option,
+ &heartbeat, sizeof(heartbeat));
+ if (result < 0) {
+ perror("setsockopt: SCTP_PEER_ADDR_PARAMS");
+ close(sk);
+ exit(1);
+ }
+}
+
+int main(int argc, char **argv)
+{
+ int opt, type, srv_sock, client_sock, result, sockoption = 0;
+ struct addrinfo srv_hints, client_hints, *srv_res, *client_res;
+ bool verbose = false;
+ char *context;
+
+ while ((opt = getopt(argc, argv, "o:v")) != -1) {
+ switch (opt) {
+ case 'o':
+ if (!strcmp(optarg, "aci"))
+ sockoption = SCTP_ASSOCINFO;
+ else if (!strcmp(optarg, "pap"))
+ sockoption = SCTP_PEER_ADDR_PARAMS;
+ else if (!strcmp(optarg, "pat")) {
+ printf("SCTP_PEER_ADDR_THLDS not currently supported by userspace\n");
+ exit(1);
+ } else
+ usage(argv[0]);
+ break;
+ case 'v':
+ verbose = true;
+ break;
+ default:
+ usage(argv[0]);
+ }
+ }
+
+ if ((argc - optind) != 3)
+ usage(argv[0]);
+
+ if (!strcmp(argv[optind], "stream"))
+ type = SOCK_STREAM;
+ else if (!strcmp(argv[optind], "seq"))
+ type = SOCK_SEQPACKET;
+ else
+ usage(argv[0]);
+
+ if (verbose) {
+ if (getcon(&context) < 0)
+ context = strdup("unavailable");
+
+ printf("Process context: %s\n", context);
+ free(context);
+ }
+
+ memset(&srv_hints, 0, sizeof(struct addrinfo));
+ srv_hints.ai_flags = AI_PASSIVE;
+ srv_hints.ai_family = AF_INET6;
+
+ srv_hints.ai_socktype = type;
+ srv_hints.ai_protocol = IPPROTO_SCTP;
+
+ /* Set up server side */
+ result = getaddrinfo(NULL, argv[optind + 2], &srv_hints, &srv_res);
+ if (result < 0) {
+ printf("getaddrinfo - server: %s\n", gai_strerror(result));
+ exit(1);
+ }
+
+ srv_sock = socket(srv_res->ai_family, srv_res->ai_socktype,
+ srv_res->ai_protocol);
+ if (srv_sock < 0) {
+ perror("socket - server");
+ exit(1);
+ }
+
+ if (verbose)
+ print_context(srv_sock, "Server");
+
+ if (bind(srv_sock, srv_res->ai_addr, srv_res->ai_addrlen) < 0) {
+ perror("bind");
+ close(srv_sock);
+ exit(1);
+ }
+
+ listen(srv_sock, 1);
+
+ /* Set up client side */
+ memset(&client_hints, 0, sizeof(struct addrinfo));
+ client_hints.ai_socktype = type;
+ client_hints.ai_protocol = IPPROTO_SCTP;
+ result = getaddrinfo(argv[optind + 1], argv[optind + 2],
+ &client_hints, &client_res);
+ if (result < 0) {
+ fprintf(stderr, "getaddrinfo - client: %s\n",
+ gai_strerror(result));
+ exit(1);
+ }
+
+ client_sock = socket(client_res->ai_family, client_res->ai_socktype,
+ client_res->ai_protocol);
+ if (client_sock < 0) {
+ perror("socket - client");
+ exit(1);
+ }
+
+ if (verbose)
+ print_context(client_sock, "Client");
+
+ result = sctp_connectx(client_sock, client_res->ai_addr, 1, NULL);
+ if (result < 0) {
+ perror("connectx");
+ close(client_sock);
+ exit(1);
+ }
+
+ if (sockoption) {
+ switch (sockoption) {
+ case SCTP_ASSOCINFO:
+ if (verbose)
+ printf("Testing: SCTP_ASSOCINFO\n");
+ sctp_associnfo(srv_sock, sockoption);
+ break;
+ case SCTP_PEER_ADDR_PARAMS:
+ if (verbose)
+ printf("Testing: SCTP_PEER_ADDR_PARAMS\n");
+ sctp_peer_addr_params(client_sock, sockoption);
+ break;
+ }
+ } else {
+
+ if (verbose)
+ printf("Testing: SCTP_ASSOCINFO\n");
+ sctp_associnfo(srv_sock, SCTP_ASSOCINFO);
+
+ if (verbose)
+ printf("Testing: SCTP_PEER_ADDR_PARAMS\n");
+ sctp_peer_addr_params(client_sock, SCTP_PEER_ADDR_PARAMS);
+
+ }
+
+ close(srv_sock);
+ close(client_sock);
+ exit(0);
+}
diff --git a/tests/sctp/sctp_set_peer_addr.c b/tests/sctp/sctp_set_peer_addr.c
new file mode 100644
index 0000000..61a3a44
--- /dev/null
+++ b/tests/sctp/sctp_set_peer_addr.c
@@ -0,0 +1,414 @@
+/*
+ * This test will allow the server side to add/remove bindx addresses and
+ * inform the client side via ASCONF chunks. It will also allow the server
+ * side to inform the client that the peer primary address is being updated.
+ * The code for checking these parameters are in net/sctp/sm_make_chunk.c
+ * sctp_process_asconf_param().
+ *
+ * To enable the processing of these incoming ASCONF parameters for:
+ * SCTP_PARAM_SET_PRIMARY, SCTP_PARAM_ADD_IP and SCTP_PARAM_DEL_IP
+ * the following options must be enabled:
+ * echo 1 > /proc/sys/net/sctp/addip_enable
+ * echo 1 > /proc/sys/net/sctp/addip_noauth_enable
+ *
+ * If these are not enabled the SCTP_SET_PEER_PRIMARY_ADDR setsockopt
+ * fails with EPERM "Operation not permitted", however the bindx calls
+ * will complete but the client side will not be informed.
+ *
+ * NOTES:
+ * 1) SCTP_SET_PEER_PRIMARY_ADDR requires a non-loopback IP address.
+ * 2) Both addresses MUST be the same type (i.e. IPv4 or IPv6).
+ */
+
+#include "sctp_common.h"
+
+static void usage(char *progname)
+{
+ fprintf(stderr,
+ "usage: %s -v addr new_pri_addr port\n"
+ "\nWhere:\n\t"
+ "-v Print status information.\n\t"
+ "addr IPv4/IPv6 address for initial connection.\n\t"
+ "new_pri_addr IPv4/IPv6 address that the server will bindx\n\t"
+ " then set to the new SCTP_PRIMARY_ADDR.\n\t"
+ "port port.\n", progname);
+ fprintf(stderr,
+ "Notes:\n\t"
+ "1) addr and new_pri_addr MUST NOT be loopback addresses.\n\t"
+ "2) addr and new_pri_addr MUST be same type (IPv4 or IPv6).\n\t"
+ "3) IPv6 link-local addresses require the %%<if_name> to\n\t"
+ " obtain scopeid. e.g. fe80::7629:afff:fe0f:8e5d%%wlp6s0\n");
+ exit(1);
+}
+
+static int peer_count, peer_count_err;
+
+static void getpaddrs_alarm(int sig)
+{
+ fprintf(stderr, "Get peer address count timer expired - carry on test\n");
+ peer_count += 1;
+ peer_count_err = true;
+}
+
+static void getprimaddr_alarm(int sig)
+{
+ fprintf(stderr, "Get primary address timer expired - end test.\n");
+ exit(1);
+}
+
+static void print_primaddr(char *msg, int socket)
+{
+ int result;
+ struct sctp_prim prim;
+ struct sockaddr_in *in_addr;
+ struct sockaddr_in6 *in6_addr;
+ struct sockaddr *paddr;
+ socklen_t prim_len;
+ char addr_buf[INET6_ADDRSTRLEN];
+ const char *addr_ptr = NULL;
+
+ memset(&prim, 0, sizeof(struct sctp_prim));
+
+ prim_len = sizeof(struct sctp_prim);
+ result = getsockopt(socket, IPPROTO_SCTP, SCTP_PRIMARY_ADDR,
+ &prim, &prim_len);
+ if (result < 0) {
+ perror("getsockopt: SCTP_PRIMARY_ADDR");
+ exit(1);
+ }
+
+ paddr = (struct sockaddr *)&prim.ssp_addr;
+ if (paddr->sa_family == AF_INET) {
+ in_addr = (struct sockaddr_in *)&prim.ssp_addr;
+ addr_ptr = inet_ntop(AF_INET, &in_addr->sin_addr, addr_buf,
+ INET6_ADDRSTRLEN);
+ } else if (paddr->sa_family == AF_INET6) {
+ in6_addr = (struct sockaddr_in6 *)&prim.ssp_addr;
+ addr_ptr = inet_ntop(AF_INET6, &in6_addr->sin6_addr, addr_buf,
+ INET6_ADDRSTRLEN);
+ }
+
+ if (!addr_ptr) {
+ perror("inet_ntop");
+ exit(1);
+ }
+
+ printf("%s SCTP_PRIMARY_ADDR: %s\n", msg, addr_ptr);
+}
+
+static void get_primaddr(char *addr_buf, int socket)
+{
+ int result;
+ struct sctp_prim prim;
+ struct sockaddr_in *in_addr;
+ struct sockaddr_in6 *in6_addr;
+ struct sockaddr *paddr;
+ socklen_t prim_len;
+ const char *addr_ptr = NULL;
+
+ memset(&prim, 0, sizeof(struct sctp_prim));
+ prim_len = sizeof(struct sctp_prim);
+ result = getsockopt(socket, IPPROTO_SCTP, SCTP_PRIMARY_ADDR,
+ &prim, &prim_len);
+ if (result < 0) {
+ perror("getsockopt: SCTP_PRIMARY_ADDR");
+ exit(1);
+ }
+
+ paddr = (struct sockaddr *)&prim.ssp_addr;
+ if (paddr->sa_family == AF_INET) {
+ in_addr = (struct sockaddr_in *)&prim.ssp_addr;
+ addr_ptr = inet_ntop(AF_INET, &in_addr->sin_addr, addr_buf,
+ INET6_ADDRSTRLEN);
+ } else if (paddr->sa_family == AF_INET6) {
+ in6_addr = (struct sockaddr_in6 *)&prim.ssp_addr;
+ addr_ptr = inet_ntop(AF_INET6, &in6_addr->sin6_addr, addr_buf,
+ INET6_ADDRSTRLEN);
+ }
+ if (!addr_ptr) {
+ perror("inet_ntop");
+ exit(1);
+ }
+}
+
+int main(int argc, char **argv)
+{
+ int opt, srv_sock, client_sock, new_sock, result, on = 1;
+ struct addrinfo srv_hints, client_hints, *srv_res, *client_res;
+ struct addrinfo *new_pri_addr_res;
+ struct sockaddr *sa_ptr, *paddrs;
+ socklen_t sinlen;
+ struct sockaddr_storage sin;
+ struct sctp_setpeerprim setpeerprim;
+ bool verbose = false, is_ipv6 = false;
+ char client_prim_addr[INET6_ADDRSTRLEN];
+ char client_prim_new_pri_addr[INET6_ADDRSTRLEN];
+
+ while ((opt = getopt(argc, argv, "v")) != -1) {
+ switch (opt) {
+ case 'v':
+ verbose = true;
+ break;
+ default:
+ usage(argv[0]);
+ }
+ }
+
+ if ((argc - optind) != 3)
+ usage(argv[0]);
+
+ if (strchr(argv[optind], ':') && strchr(argv[optind + 1], ':')) {
+ is_ipv6 = true;
+ srv_hints.ai_family = AF_INET6;
+ } else if (strchr(argv[optind], '.') &&
+ strchr(argv[optind + 1], '.')) {
+ is_ipv6 = false;
+ srv_hints.ai_family = AF_INET;
+ } else {
+ usage(argv[0]);
+ }
+
+ memset(&srv_hints, 0, sizeof(struct addrinfo));
+ srv_hints.ai_flags = AI_PASSIVE;
+ srv_hints.ai_socktype = SOCK_STREAM;
+ srv_hints.ai_protocol = IPPROTO_SCTP;
+
+ /* Set up server side */
+ result = getaddrinfo(argv[optind], argv[optind + 2],
+ &srv_hints, &srv_res);
+ if (result < 0) {
+ fprintf(stderr, "getaddrinfo - server: %s\n",
+ gai_strerror(result));
+ exit(1);
+ }
+
+ result = getaddrinfo(argv[optind], argv[optind + 2],
+ &srv_hints, &srv_res);
+ if (result < 0) {
+ fprintf(stderr, "getaddrinfo - server: %s\n",
+ gai_strerror(result));
+ exit(1);
+ }
+ if (is_ipv6 && verbose)
+ printf("Server scopeID: %d\n",
+ ((struct sockaddr_in6 *)
+ srv_res->ai_addr)->sin6_scope_id);
+
+ srv_sock = socket(srv_res->ai_family, srv_res->ai_socktype,
+ srv_res->ai_protocol);
+ if (srv_sock < 0) {
+ perror("socket - server");
+ exit(1);
+ }
+
+ result = setsockopt(srv_sock, SOL_SOCKET, SO_REUSEADDR,
+ &on, sizeof(on));
+ if (result < 0) {
+ perror("setsockopt: SO_REUSEADDR");
+ close(srv_sock);
+ exit(1);
+ }
+
+ result = bind(srv_sock, srv_res->ai_addr, srv_res->ai_addrlen);
+ if (result < 0) {
+ perror("bind");
+ close(srv_sock);
+ exit(1);
+ }
+
+ listen(srv_sock, 1);
+
+ /* Set up client side and connect */
+ memset(&client_hints, 0, sizeof(struct addrinfo));
+ client_hints.ai_socktype = SOCK_STREAM;
+ client_hints.ai_protocol = IPPROTO_SCTP;
+ result = getaddrinfo(argv[optind], argv[optind + 2],
+ &client_hints, &client_res);
+ if (result < 0) {
+ fprintf(stderr, "getaddrinfo - client: %s\n",
+ gai_strerror(result));
+ close(srv_sock);
+ exit(1);
+ }
+ if (is_ipv6 && verbose)
+ printf("Client scopeID: %d\n",
+ ((struct sockaddr_in6 *)
+ client_res->ai_addr)->sin6_scope_id);
+
+ client_sock = socket(client_res->ai_family, client_res->ai_socktype,
+ client_res->ai_protocol);
+ if (client_sock < 0) {
+ perror("socket - client");
+ close(srv_sock);
+ exit(1);
+ }
+
+ result = connect(client_sock, client_res->ai_addr,
+ client_res->ai_addrlen);
+ if (result < 0) {
+ if (errno != EINPROGRESS)
+ perror("connect");
+ else
+ fprintf(stderr, "connect timeout\n");
+ result = 1;
+ goto err2;
+ }
+
+ /* Obtain address info for the BINDX_ADD and new SCTP_PRIMARY_ADDR. */
+ result = getaddrinfo(argv[optind + 1], argv[optind + 2],
+ &client_hints, &new_pri_addr_res);
+ if (result < 0) {
+ fprintf(stderr, "getaddrinfo - new SCTP_PRIMARY_ADDR: %s\n",
+ gai_strerror(result));
+ close(srv_sock);
+ exit(1);
+ }
+ if (is_ipv6 && verbose)
+ printf("new_pri_addr scopeID: %d\n",
+ ((struct sockaddr_in6 *)
+ new_pri_addr_res->ai_addr)->sin6_scope_id);
+
+ /* Get number of peer addresses on CLIENT (should be 1) for a check
+ * later as sctp_bindx SERVER -> CLIENT is non-blocking.
+ */
+ peer_count = sctp_getpaddrs(client_sock, 0, &paddrs);
+ sctp_freepaddrs(paddrs);
+ if (verbose)
+ printf("Client peer address count: %d\n", peer_count);
+
+ /* Client and server now set so accept new socket on server side. */
+ new_sock = accept(srv_sock, (struct sockaddr *)&sin, &sinlen);
+ if (new_sock < 0) {
+ perror("accept");
+ result = 1;
+ goto err2;
+ }
+
+ /* Get initial CLIENT primary address (that should be ADDR1). */
+ get_primaddr(client_prim_addr, client_sock);
+
+ /* Now call sctp_bindx to add new_pri_addr, this will cause an
+ * ASCONF - SCTP_PARAM_ADD_IP chunk to be sent to the CLIENT.
+ * This is non-blocking so there maybe a delay before the CLIENT
+ * receives the asconf chunk.
+ */
+ if (verbose)
+ printf("Calling sctp_bindx ADD: %s\n", argv[optind + 1]);
+
+ result = sctp_bindx(new_sock,
+ (struct sockaddr *)new_pri_addr_res->ai_addr,
+ 1, SCTP_BINDX_ADD_ADDR);
+ if (result < 0) {
+ if (errno == EACCES) {
+ perror("sctp_bindx ADD");
+ } else {
+ perror("sctp_bindx ADD");
+ result = 1;
+ goto err1;
+ }
+ }
+ /* so set an alarm and check number of peer addresses for CLIENT. */
+ signal(SIGALRM, getpaddrs_alarm);
+ alarm(2);
+ peer_count_err = false;
+ result = 0;
+
+ while (result != peer_count + 1) {
+ result = sctp_getpaddrs(client_sock, 0, &paddrs);
+ sctp_freepaddrs(paddrs);
+
+ if (peer_count_err)
+ break;
+ }
+ peer_count = result;
+
+ if (verbose)
+ printf("Client peer address count: %d\n", result);
+
+ /* Now that the CLIENT has the new primary address ensure they use
+ * it by SCTP_SET_PEER_PRIMARY_ADDR.
+ */
+ memset(&setpeerprim, 0, sizeof(struct sctp_setpeerprim));
+ sa_ptr = (struct sockaddr *)&setpeerprim.sspp_addr;
+ if (is_ipv6)
+ memcpy(sa_ptr, new_pri_addr_res->ai_addr,
+ sizeof(struct sockaddr_in6));
+ else
+ memcpy(sa_ptr, new_pri_addr_res->ai_addr,
+ sizeof(struct sockaddr_in));
+
+ if (verbose)
+ printf("Calling setsockopt SCTP_SET_PEER_PRIMARY_ADDR: %s\n",
+ argv[optind + 1]);
+
+ result = setsockopt(new_sock, IPPROTO_SCTP,
+ SCTP_SET_PEER_PRIMARY_ADDR,
+ &setpeerprim, sizeof(struct sctp_setpeerprim));
+ if (result < 0) {
+ perror("setsockopt: SCTP_SET_PEER_PRIMARY_ADDR");
+ result = 1;
+ goto err1;
+ }
+
+ /* Now get the new primary address from the client */
+ signal(SIGALRM, getprimaddr_alarm);
+ alarm(2);
+ memcpy(client_prim_new_pri_addr, client_prim_addr, INET6_ADDRSTRLEN);
+
+ while (!strcmp(client_prim_addr, client_prim_new_pri_addr))
+ get_primaddr(client_prim_new_pri_addr, client_sock);
+
+ if (verbose) {
+ printf("Client initial SCTP_PRIMARY_ADDR: %s\n",
+ client_prim_addr);
+ print_primaddr("Server", new_sock);
+ printf("Client current SCTP_PRIMARY_ADDR: %s\n",
+ client_prim_new_pri_addr);
+ }
+
+ /* Then delete addr1 that checks ASCONF - SCTP_PARAM_DEL_IP. */
+ if (verbose)
+ printf("Calling sctp_bindx REM: %s\n", argv[optind]);
+
+ result = sctp_bindx(new_sock, (struct sockaddr *)client_res->ai_addr,
+ 1, SCTP_BINDX_REM_ADDR);
+ if (result < 0) {
+ perror("sctp_bindx - REM");
+ result = 1;
+ goto err1;
+ }
+
+ if (!peer_count_err) {
+ alarm(2);
+ result = 0;
+
+ while (result != peer_count - 1) {
+ result = sctp_getpaddrs(client_sock, 0, &paddrs);
+ sctp_freepaddrs(paddrs);
+ }
+
+ if (verbose)
+ printf("Client peer address count: %d\n", result);
+ }
+
+ /* Compare the client primary addresses, they should be different. */
+ if (!strcmp(client_prim_addr, client_prim_new_pri_addr)) {
+ fprintf(stderr,
+ "Client addr: %s same as new_pri_addr: %s - SCTP_SET_PEER_PRIMARY_ADDR failed\n",
+ client_prim_addr, client_prim_new_pri_addr);
+ result = 1;
+ goto err1;
+ }
+
+ if (verbose)
+ printf("Client primary address changed successfully.\n");
+
+ result = 0;
+
+err1:
+ close(new_sock);
+err2:
+ close(srv_sock);
+ close(client_sock);
+ exit(result);
+}
diff --git a/tests/sctp/sctp_set_pri_addr.c b/tests/sctp/sctp_set_pri_addr.c
new file mode 100644
index 0000000..5122001
--- /dev/null
+++ b/tests/sctp/sctp_set_pri_addr.c
@@ -0,0 +1,135 @@
+#include "sctp_common.h"
+
+static void usage(char *progname)
+{
+ fprintf(stderr,
+ "usage: %s [-v] addr port\n"
+ "\nWhere:\n\t"
+ "-v Print information.\n\t"
+ "addr Servers IPv4 or IPv6 address.\n\t"
+ "port port.\n", progname);
+ exit(1);
+}
+
+static void sctp_primary_addr(int sk, int option)
+{
+ int result;
+ socklen_t len;
+ struct sctp_prim primaddr;
+
+ memset(&primaddr, 0, sizeof(struct sctp_prim));
+
+ len = sizeof(struct sctp_prim);
+ result = getsockopt(sk, IPPROTO_SCTP, option,
+ &primaddr, &len);
+ if (result < 0) {
+ perror("getsockopt: SCTP_PRIMARY_ADDR");
+ close(sk);
+ exit(1);
+ }
+
+ result = setsockopt(sk, IPPROTO_SCTP, option, &primaddr, len);
+ if (result < 0) {
+ perror("setsockopt: SCTP_PRIMARY_ADDR");
+ close(sk);
+ exit(1);
+ }
+}
+
+int main(int argc, char **argv)
+{
+ int opt, srv_sock, client_sock, result;
+ struct addrinfo srv_hints, client_hints, *srv_res, *client_res;
+ bool verbose = false;
+ char *context;
+
+ while ((opt = getopt(argc, argv, "v")) != -1) {
+ switch (opt) {
+ case 'v':
+ verbose = true;
+ break;
+ default:
+ usage(argv[0]);
+ }
+ }
+
+ if ((argc - optind) != 2)
+ usage(argv[0]);
+
+ if (verbose) {
+ if (getcon(&context) < 0)
+ context = strdup("unavailable");
+
+ printf("Process context: %s\n", context);
+ free(context);
+ }
+
+ memset(&srv_hints, 0, sizeof(struct addrinfo));
+ srv_hints.ai_flags = AI_PASSIVE;
+ srv_hints.ai_family = AF_INET6;
+
+ srv_hints.ai_socktype = SOCK_STREAM;
+ srv_hints.ai_protocol = IPPROTO_SCTP;
+
+ /* Set up server side */
+ result = getaddrinfo(NULL, argv[optind + 1], &srv_hints, &srv_res);
+ if (result < 0) {
+ printf("getaddrinfo - server: %s\n", gai_strerror(result));
+ exit(1);
+ }
+
+ srv_sock = socket(srv_res->ai_family, srv_res->ai_socktype,
+ srv_res->ai_protocol);
+ if (srv_sock < 0) {
+ perror("socket - server");
+ exit(1);
+ }
+
+ if (verbose)
+ print_context(srv_sock, "Server");
+
+ if (bind(srv_sock, srv_res->ai_addr, srv_res->ai_addrlen) < 0) {
+ perror("bind");
+ close(srv_sock);
+ exit(1);
+ }
+
+ listen(srv_sock, 1);
+
+ /* Set up client side */
+ memset(&client_hints, 0, sizeof(struct addrinfo));
+ client_hints.ai_socktype = SOCK_STREAM;
+ client_hints.ai_protocol = IPPROTO_SCTP;
+ result = getaddrinfo(argv[optind], argv[optind + 1], &client_hints,
+ &client_res);
+ if (result < 0) {
+ fprintf(stderr, "getaddrinfo - client: %s\n",
+ gai_strerror(result));
+ exit(1);
+ }
+
+ client_sock = socket(client_res->ai_family, client_res->ai_socktype,
+ client_res->ai_protocol);
+ if (client_sock < 0) {
+ perror("socket - client");
+ exit(1);
+ }
+
+ if (verbose)
+ print_context(client_sock, "Client");
+
+ result = sctp_connectx(client_sock, client_res->ai_addr, 1, NULL);
+ if (result < 0) {
+ perror("connectx");
+ close(client_sock);
+ exit(1);
+ }
+
+ if (verbose)
+ printf("Testing: SCTP_PRIMARY_ADDR\n");
+ sctp_primary_addr(client_sock, SCTP_PRIMARY_ADDR);
+
+ close(srv_sock);
+ close(client_sock);
+ exit(0);
+}
diff --git a/tests/sctp/test b/tests/sctp/test
new file mode 100644
index 0000000..c694453
--- /dev/null
+++ b/tests/sctp/test
@@ -0,0 +1,791 @@
+#!/usr/bin/perl
+use Test::More;
+
+BEGIN {
+ $basedir = $0;
+ $basedir =~ s|(.*)/[^/]*|$1|;
+
+ # check if sctp enabled
+ if ( system("checksctp 2> /dev/null") != 0 ) {
+ plan skip_all => "SCTP not supported";
+ }
+ else {
+ $test_count = 71;
+
+ # asconf parameter tests require two local non-loopback addresses.
+ $test_asconf = 0;
+ $ipaddress_list = `hostname -I`;
+ @ipaddress = split /\s+/, $ipaddress_list;
+
+ if ( $ipaddress[1] ) {
+ $test_count += 2;
+ $test_asconf = 1;
+ }
+
+ # Determine if CALIPSO supported by netlabelctl(8) and kernel.
+ $test_calipso = 0;
+ $netlabelctl = `netlabelctl -V`;
+ $netlabelctl =~ s/\D//g;
+ $kvercur = `uname -r`;
+ chomp($kvercur);
+ $kvermincalipso = "4.8";
+
+ $rc = `$basedir/../kvercmp $kvercur $kvermincalipso`;
+ if ( $netlabelctl gt "021" && $rc > 0 ) {
+ $test_count += 13;
+ $test_calipso = 1;
+ }
+
+ plan tests => $test_count;
+ }
+}
+
+#
+# NOTE: direction flow is given as Client->Server (STREAM->SEQ)
+#
+
+#
+########################## Test base configuration ##########################
+#
+print "# Testing base configuration.\n";
+
+# Start the stream server.
+if ( ( $pid = fork() ) == 0 ) {
+ exec "runcon -t test_sctp_server_t $basedir/sctp_server -n stream 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize.
+
+# Verify that authorized client can communicate with the server STREAM->STREAM with client using connect(2).
+$result = system
+"runcon -t test_sctp_client_t $basedir/sctp_client -e nopeer stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server STREAM->STREAM with client using sctp_connectx(3).
+$result = system
+"runcon -t test_sctp_client_t $basedir/sctp_client -x -e nopeer stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server SEQ->STREAM with no client connect(2).
+$result = system
+"runcon -t test_sctp_client_t $basedir/sctp_client -n -e nopeer seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server SEQ->STREAM.
+$result = system
+ "runcon -t test_sctp_client_t $basedir/sctp_client -e nopeer seq ::1 1035";
+ok( $result eq 0 );
+
+######## This test requires setting a portcon statement in policy ###########
+# Verify that the client cannot communicate with server when using port not allowed STREAM->STREAM.
+# Note that the sctp_test policy only allows ports 1024-65535
+$result = system
+"runcon -t test_sctp_client_t -- $basedir/sctp_client -e nopeer stream ::1 1023 2>&1";
+ok( $result >> 8 eq 8 );
+
+# Kill the stream server.
+kill TERM, $pid;
+
+######## This test requires setting a portcon statement in policy ###########
+# Verify that the server cannot start when using port not allowed STREAM->STREAM.
+# Note that the sctp_test policy only allows ports 1024-65535
+$result =
+ system "runcon -t test_sctp_server_t -- $basedir/sctp_bind stream 80 2>&1";
+ok($result);
+
+#
+############################### CONNECTX #####################################
+#
+print "# Testing connectx.\n";
+
+$result = system
+ "runcon -t test_sctp_connectx_t $basedir/sctp_connectx stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+$result =
+ system "runcon -t test_sctp_connectx_t $basedir/sctp_connectx seq ::1 1035";
+ok( $result eq 0 );
+
+#
+################################ BINDX #######################################
+#
+print "# Testing bindx.\n";
+
+$result =
+ system "runcon -t test_sctp_bindx_t $basedir/sctp_bindx -r stream 1035";
+ok( $result eq 0 );
+
+$result = system "runcon -t test_sctp_bindx_t $basedir/sctp_bindx -r seq 1035";
+ok( $result eq 0 );
+
+#
+######################### SET_PRI_ADDR SET_PEER_ADDR ########################
+#
+
+# These tests require two local non-loopback addresses.
+if ($test_asconf) {
+ print "# Testing asconf parameter chunk processing.\n";
+
+ # To enable processing of incoming ASCONF parameters:
+ # SCTP_PARAM_SET_PRIMARY, SCTP_PARAM_ADD_IP and SCTP_PARAM_DEL_IP,
+ # need to set:
+ system("echo 1 > /proc/sys/net/sctp/addip_enable");
+ system("echo 1 > /proc/sys/net/sctp/addip_noauth_enable");
+
+ # Verify ASCONF params.
+ $result = system
+"runcon -t test_sctp_set_peer_addr_t $basedir/sctp_set_peer_addr $ipaddress[0] $ipaddress[1] 1035";
+ ok( $result eq 0 );
+
+ # Start the asconf server.
+ if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_set_peer_addr_t $basedir/sctp_asconf_params_server $ipaddress[0] $ipaddress[1] 1035";
+ }
+ select( undef, undef, undef, 0.25 ); # Give it a moment to initialize.
+
+# This should fail connect permission attempting to send SCTP_PARAM_ADD_IP to client.
+ $result = system
+"runcon -t test_sctp_client_t -- $basedir/sctp_asconf_params_client $ipaddress[0] 1035 2>&1";
+ ok($result);
+
+ # The server should automatically exit.
+ kill TERM, $pid;
+
+ system("echo 0 > /proc/sys/net/sctp/addip_enable");
+ system("echo 0 > /proc/sys/net/sctp/addip_noauth_enable");
+}
+
+#
+######################## Test NetLabel Configurations #######################
+#
+########################## Fallback peer Labeling ############################
+#
+
+# Load NetLabel configuration using "netlabel_sctp_peer_t" as the label.
+print "# Testing NetLabel fallback peer labeling.\n";
+system "/bin/sh $basedir/fb-label-load";
+
+# Start stream server.
+if ( ( $pid = fork() ) == 0 ) {
+ exec "runcon -t test_sctp_server_t $basedir/sctp_server stream 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize.
+
+# Verify that authorized client can communicate with the server STREAM->STREAM.
+$result = system
+"runcon -t test_sctp_client_t $basedir/sctp_client -e system_u:object_r:netlabel_sctp_peer_t:s0 stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server SEQ->STREAM.
+$result = system
+"runcon -t test_sctp_client_t $basedir/sctp_client -e system_u:object_r:netlabel_sctp_peer_t:s0 seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that a client without peer { recv } permission cannot communicate with the server STREAM->STREAM.
+$result = system
+"runcon -t test_sctp_deny_peer_client_t -- $basedir/sctp_client -e system_u:object_r:netlabel_sctp_peer_t:s0 stream 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Kill the stream server.
+kill TERM, $pid;
+
+# Start seq server.
+if ( ( $pid = fork() ) == 0 ) {
+ exec "runcon -t test_sctp_server_t $basedir/sctp_server seq 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize
+
+# Verify that authorized client can communicate with the server SEQ->SEQ.
+$result = system
+"runcon -t test_sctp_client_t $basedir/sctp_client -e system_u:object_r:netlabel_sctp_peer_t:s0 seq ::1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server STREAM->SEQ.
+$result = system
+"runcon -t test_sctp_client_t $basedir/sctp_client -e system_u:object_r:netlabel_sctp_peer_t:s0 stream ::1 1035";
+ok( $result eq 0 );
+
+# Verify that a client using connect(2) without peer { recv } permission cannot communicate with the server SEQ->SEQ.
+$result = system
+"runcon -t test_sctp_deny_peer_client_t -- $basedir/sctp_client -e system_u:object_r:netlabel_sctp_peer_t:s0 seq ::1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Verify that a client using sctp_connectx(3) without peer { recv } permission cannot communicate with the server SEQ->SEQ.
+$result = system
+"runcon -t test_sctp_deny_peer_client_t -- $basedir/sctp_client -x -e system_u:object_r:netlabel_sctp_peer_t:s0 seq ::1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Verify that a client not using any connect without peer { recv } permission cannot communicate with the server SEQ->SEQ.
+$result = system
+"runcon -t test_sctp_deny_peer_client_t -- $basedir/sctp_client -n -e system_u:object_r:netlabel_sctp_peer_t:s0 seq ::1 1035 2>&1";
+ok( $result >> 8 eq 13 );
+
+# Kill the seq server.
+kill TERM, $pid;
+
+system "/bin/sh $basedir/fb-label-flush";
+
+#
+#################### Test deny association permission ########################
+#
+print "# Testing deny association.\n";
+system "/bin/sh $basedir/fb-deny-label-load";
+
+if ( ( $pid = fork() ) == 0 ) {
+ exec "runcon -t test_sctp_server_t $basedir/sctp_server stream 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize
+
+# Verify that authorized client can communicate with the server STREAM->STREAM.
+# This sets the servers initial peer context to netlabel_sctp_peer_t:s0
+$result = system
+"runcon -t test_sctp_client_t $basedir/sctp_client -e system_u:object_r:netlabel_sctp_peer_t:s0 stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that the server is denied this association as the client will timeout on connect.
+$result = system
+"runcon -t test_sctp_client_t -- $basedir/sctp_client -e system_u:object_r:deny_assoc_sctp_peer_t:s0 stream ::1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Kill the seq server.
+kill TERM, $pid;
+
+system "/bin/sh $basedir/fb-deny-label-flush";
+
+#
+############################## CIPSO/IPv4 TAG 1 ###############################
+#
+print "# Testing CIPSO/IPv4 - TAG 1 using socket ip_option data\n";
+system "/bin/sh $basedir/cipso-load-t1";
+
+# Start the stream server for IPv4 only.
+if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_server_t -l s0:c182.c192 $basedir/sctp_server -4 -i stream 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize.
+
+# Verify that authorized client can communicate with the server STREAM->STREAM with client using sctp_connectx(3).
+$result = system
+"runcon -t test_sctp_client_t -l s0:c182.c192 $basedir/sctp_client -x -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server STREAM->STREAM with client using connect(2).
+$result = system
+"runcon -t test_sctp_client_t -l s0:c182.c192 $basedir/sctp_client -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using different valid level STREAM->STREAM.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c182,c187,c190 $basedir/sctp_client -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using different valid level SEQ->STREAM
+$result = system
+"runcon -t test_sctp_client_t -l s0:c189,c192 $basedir/sctp_client -i seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client cannot communicate with the server using invalid level STREAM->STREAM.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c182.c193 -- $basedir/sctp_client stream 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Kill the stream server.
+kill TERM, $pid;
+
+# Start the seq server.
+if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_server_t -l s0:c20.c300 $basedir/sctp_server -i -4 seq 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize
+
+# Verify that authorized client can communicate with the server. SEQ->SEQ
+$result = system
+"runcon -t test_sctp_client_t -l s0:c27.c28 $basedir/sctp_client -i seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using STREAM->SEQ.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c20.c30 $basedir/sctp_client -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using SEQ->SEQ with diff valid level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c20.c24,c26,c27.c29 $basedir/sctp_client -i seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that client cannot communicate with the server using SEQ->SEQ with invalid level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c19.c100 -- $basedir/sctp_client -i seq 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# TAG 1 allows categories 0 to 239 to be sent, if greater then ENOSPC (No space left on device)
+$result = system
+"runcon -t test_sctp_client_t -l s0:c20.c300 -- $basedir/sctp_client -i seq 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 7 );
+
+# Kill server.
+kill TERM, $pid;
+
+print "# Testing CIPSO/IPv4 - TAG 1 PEELOFF using socket ip_option data\n";
+
+# Test sctp_peeloff(3) using 1 to Many SOCK_SEQPACKET
+if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_server_t -l s0:c0.c10 $basedir/sctp_peeloff_server -4 -i 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize
+
+# Verify that authorized client can communicate with the server using SEQ->SEQ->Peeloff with same level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client -i seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using STREAM->SEQ->peeloff with same level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client -x -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that client cannot communicate with the server using STREAM->SEQ->peeloff with invalid level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c0.c11 -- $basedir/sctp_client -x -i stream 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Kill the seq server.
+kill TERM, $pid;
+
+system "/bin/sh $basedir/cipso-flush";
+
+#
+############################## CIPSO/IPv4 TAG 2 ###############################
+#
+print "# Testing CIPSO/IPv4 - TAG 2 using socket ip_option data\n";
+system "/bin/sh $basedir/cipso-load-t2";
+
+# Start the stream server for IPv4 only.
+if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_server_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_server -4 -i stream 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize.
+
+# Verify that authorized client can communicate with the server STREAM->STREAM with client using sctp_connectx(3).
+$result = system
+"runcon -t test_sctp_client_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_client -x -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server STREAM->STREAM with client using connect(2).
+$result = system
+"runcon -t test_sctp_client_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_client -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using different valid level STREAM->STREAM.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c769,c788,c803,c842,c864 $basedir/sctp_client -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using different valid level SEQ->STREAM
+$result = system
+"runcon -t test_sctp_client_t -l s0:c769,c788,c803 $basedir/sctp_client -i seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client cannot communicate with the server using invalid level STREAM->STREAM.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c1023 -- $basedir/sctp_client stream 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Kill the stream server.
+kill TERM, $pid;
+
+# Start the seq server.
+if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_server_t -l s0:c20.c335 $basedir/sctp_server -i -4 seq 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize
+
+# Verify that authorized client can communicate with the server. SEQ->SEQ
+$result = system
+"runcon -t test_sctp_client_t -l s0:c328.c333 $basedir/sctp_client -i seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using STREAM->SEQ.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c20.c34 $basedir/sctp_client -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using SEQ->SEQ with diff valid level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c20.c30,c31,c335 $basedir/sctp_client -i seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that client cannot communicate with the server using SEQ->SEQ with invalid level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c19.c30 -- $basedir/sctp_client -i seq 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# TAG 2 allows a maximum of 15 categories in exchange, if greater then ENOSPC (No space left on device)
+$result = system
+"runcon -t test_sctp_client_t -l s0:c200.c216 -- $basedir/sctp_client -i seq 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 7 );
+
+# Kill server.
+kill TERM, $pid;
+
+print "# Testing CIPSO/IPv4 - TAG 2 PEELOFF using socket ip_option data\n";
+
+# Test sctp_peeloff(3) using 1 to Many SOCK_SEQPACKET
+if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_server_t -l s0:c0.c10 $basedir/sctp_peeloff_server -4 -i 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize
+
+# Verify that authorized client can communicate with the server using SEQ->SEQ->Peeloff with same level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client -i seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using STREAM->SEQ->peeloff with same level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client -x -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that client cannot communicate with the server using STREAM->SEQ->peeloff with invalid level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c0.c11 -- $basedir/sctp_client -x -i stream 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Kill the seq server.
+kill TERM, $pid;
+
+system "/bin/sh $basedir/cipso-flush";
+
+#
+############################## CIPSO/IPv4 TAG 5 ###############################
+#
+print "# Testing CIPSO/IPv4 - TAG 5 using socket ip_option data\n";
+system "/bin/sh $basedir/cipso-load-t5";
+
+# Start the stream server for IPv4 only.
+if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_server_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_server -4 -i stream 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize.
+
+# Verify that authorized client can communicate with the server STREAM->STREAM with client using sctp_connectx(3).
+$result = system
+"runcon -t test_sctp_client_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_client -x -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server STREAM->STREAM with client using connect(2).
+$result = system
+"runcon -t test_sctp_client_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_client -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using different valid level STREAM->STREAM.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c769,c788,c803,c842,c864 $basedir/sctp_client -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using different valid level SEQ->STREAM
+$result = system
+"runcon -t test_sctp_client_t -l s0:c769,c788,c803 $basedir/sctp_client -i seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client cannot communicate with the server using invalid level STREAM->STREAM.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c1023 -- $basedir/sctp_client stream 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Kill the stream server.
+kill TERM, $pid;
+
+# Start the seq server.
+if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_server_t -l s0:c20.c50 $basedir/sctp_server -i -4 seq 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize
+
+# Verify that authorized client can communicate with the server. SEQ->SEQ
+$result = system
+"runcon -t test_sctp_client_t -l s0:c28.c48 $basedir/sctp_client -i seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using STREAM->SEQ.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c20.c50 $basedir/sctp_client -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using SEQ->SEQ with diff valid level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c20.c30,c31,c35,c40.c45 $basedir/sctp_client -i seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that client cannot communicate with the server using SEQ->SEQ with invalid level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c20.c51 -- $basedir/sctp_client -i seq 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# TAG 2 allows a maximum of 7 ranges in exchange, if greater then ENOSPC (No space left on device)
+$result = system
+"runcon -t test_sctp_client_t -l s0:c20,c22,c24,c30.c33,c38,c42.c45,c48,c50 -- $basedir/sctp_client -i seq 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 7 );
+
+# Kill server.
+kill TERM, $pid;
+
+print "# Testing CIPSO/IPv4 - TAG 5 PEELOFF using socket ip_option data\n";
+
+# Test sctp_peeloff(3) using 1 to Many SOCK_SEQPACKET
+if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_server_t -l s0:c0.c10 $basedir/sctp_peeloff_server -4 -i 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize
+
+# Verify that authorized client can communicate with the server using SEQ->SEQ->Peeloff with same level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client -i seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using STREAM->SEQ->peeloff with same level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client -x -i stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that client cannot communicate with the server using STREAM->SEQ->peeloff with invalid level.
+$result = system
+"runcon -t test_sctp_client_t -l s0:c0.c11 -- $basedir/sctp_client -x -i stream 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Kill the seq server.
+kill TERM, $pid;
+
+system "/bin/sh $basedir/cipso-flush";
+
+#
+################## CIPSO/IPv4 Full Labeling over Loopback ####################
+#
+
+print "# Testing CIPSO/IPv4 full labeling over loopback.\n";
+system "/bin/sh $basedir/cipso-fl-load";
+
+# Start the stream server for IPv4 only.
+if ( ( $pid = fork() ) == 0 ) {
+ exec "runcon -t test_sctp_server_t $basedir/sctp_server -4 stream 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize.
+
+# Verify that authorized client can communicate with the server STREAM->STREAM.
+$result = system
+ "runcon -t test_sctp_client_t $basedir/sctp_client stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify a client without peer { recv } for client/server process cannot communicate with server STREAM->STREAM.
+$result = system
+"runcon -t test_sctp_deny_peer_client_t -- $basedir/sctp_client stream 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Kill the stream server.
+kill TERM, $pid;
+
+# Start the seq server for IPv4 only.
+if ( ( $pid = fork() ) == 0 ) {
+ exec "runcon -t test_sctp_server_t $basedir/sctp_server -4 seq 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize
+
+# Verify that authorized client can communicate with the server SEQ->STREAM.
+$result =
+ system "runcon -t test_sctp_client_t $basedir/sctp_client seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that a client without peer { recv } permission cannot communicate with the server SEQ->SEQ.
+$result = system
+"runcon -t test_sctp_deny_peer_client_t -- $basedir/sctp_client seq 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Kill the seq server.
+kill TERM, $pid;
+
+system "/bin/sh $basedir/cipso-fl-flush";
+
+#
+############################### CALIPSO/IPv6 #################################
+#
+
+if ($test_calipso) {
+ print "# Testing CALIPSO/IPv6 using socket ip_option data\n";
+ system "/bin/sh $basedir/calipso-load";
+
+ # Start the stream server.
+ if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_server_t -l s0:c0,c12,c24,c36,c28,c610,c712,c414,c516,c318,c820,c622,c924,c726,c128,c330,c832,c534,c936,c138,c740,c42,c44,c246,c648,c950,c152,c354,c856,c158,c960,c662,c634,c686,c368,c570,c782,c714,c769,c788,c803,c842,c864,c986,c788,c290,c392,c594,c896,c698,c1023 $basedir/sctp_server -i stream 1035";
+ }
+ select( undef, undef, undef, 0.25 ); # Give it a moment to initialize.
+
+# Verify that authorized client can communicate with the server STREAM->STREAM with client using sctp_connectx(3).
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c0,c12,c24,c36,c28,c610,c712,c414,c516,c318,c820,c622,c924,c726,c128,c330,c832,c534,c936,c138,c740,c42,c44,c246,c648,c950,c152,c354,c856,c158,c960,c662,c634,c686,c368,c570,c782,c714,c769,c788,c803,c842,c864,c986,c788,c290,c392,c594,c896,c698,c1023 $basedir/sctp_client -x -i stream ::1 1035";
+ ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server STREAM->STREAM with client using connect(2).
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c0,c12,c24,c36,c28,c610,c712,c414,c516,c318,c820,c622,c924,c726,c128,c330,c832,c534,c936,c138,c740,c42,c44,c246,c648,c950,c152,c354,c856,c158,c960,c662,c634,c686,c368,c570,c782,c714,c769,c788,c803,c842,c864,c986,c788,c290,c392,c594,c896,c698,c1023 $basedir/sctp_client -i stream ::1 1035";
+ ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using different valid level STREAM->STREAM.
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c924,c726,c128,c330,c832,c534,c936,c138,c740,c42 $basedir/sctp_client -i stream ::1 1035";
+ ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using different valid level SEQ->STREAM
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c924,c726,c128,c330,c832,c534,c936,c138,c740,c42 $basedir/sctp_client -i seq ::1 1035";
+ ok( $result eq 0 );
+
+# Verify that authorized client cannot communicate with the server using invalid level STREAM->STREAM.
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c8.c12 -- $basedir/sctp_client -i stream ::1 1035 2>&1";
+ ok( $result >> 8 eq 6 );
+
+ # Kill the stream server.
+ kill TERM, $pid;
+
+ # Start the seq server.
+ if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_server_t -l s0:c20.c50 $basedir/sctp_server -i seq 1035";
+ }
+ select( undef, undef, undef, 0.25 ); # Give it a moment to initialize
+
+ # Verify that authorized client can communicate with the server. SEQ->SEQ
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c28.c48 $basedir/sctp_client -i seq ::1 1035";
+ ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using STREAM->SEQ.
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c20.c50 $basedir/sctp_client -i stream ::1 1035";
+ ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using SEQ->SEQ with diff valid level.
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c20.c30,c31,c35,c40.c45 $basedir/sctp_client -i seq ::1 1035";
+ ok( $result eq 0 );
+
+# Verify that client cannot communicate with the server using SEQ->SEQ with invalid level.
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c20.c51 $basedir/sctp_client -i seq ::1 1035 2>&1";
+ ok( $result >> 8 eq 6 );
+
+# Verify that client cannot communicate with the server using SEQ->SEQ with invalid level.
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c19.c50 -- $basedir/sctp_client -i seq ::1 1035 2>&1";
+ ok( $result >> 8 eq 6 );
+
+ # Kill server.
+ kill TERM, $pid;
+
+ print "# Testing CALIPSO/IPv6 PEELOFF using socket ip_option data\n";
+
+ # Test sctp_peeloff(3) using 1 to Many SOCK_SEQPACKET
+ if ( ( $pid = fork() ) == 0 ) {
+ exec
+"runcon -t test_sctp_server_t -l s0:c0.c10 $basedir/sctp_peeloff_server -i 1035";
+ }
+ select( undef, undef, undef, 0.25 ); # Give it a moment to initialize
+
+# Verify that authorized client can communicate with the server using SEQ->SEQ->Peeloff with same level.
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client -i seq ::1 1035";
+ ok( $result eq 0 );
+
+# Verify that authorized client can communicate with the server using STREAM->SEQ->peeloff with same level.
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client -x -i stream ::1 1035";
+ ok( $result eq 0 );
+
+# Verify that client cannot communicate with the server using STREAM->SEQ->peeloff with invalid level.
+ $result = system
+"runcon -t test_sctp_client_t -l s0:c0.c11 -- $basedir/sctp_client -x -i stream ::1 1035 2>&1";
+ ok( $result >> 8 eq 6 );
+
+ # Kill the seq server.
+ kill TERM, $pid;
+
+ system "/bin/sh $basedir/calipso-flush";
+}
+
+#
+##################### Test iptables configuration ############################
+#
+print "# Testing iptables (IPv4/IPv6).\n";
+system "/bin/sh $basedir/iptables-load";
+
+# Start the stream server.
+if ( ( $pid = fork() ) == 0 ) {
+ exec "runcon -t test_sctp_server_t $basedir/sctp_server -n stream 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize.
+
+# Verify that authorized client can communicate with the server STREAM->STREAM.
+$result = system
+"runcon -t test_sctp_client_t $basedir/sctp_client -e nopeer stream 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that a client without peer { recv } permission cannot communicate with the server STREAM->STREAM.
+$result = system
+"runcon -t test_sctp_deny_peer_client_t -- $basedir/sctp_client -e nopeer stream 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Verify that authorized client can communicate with the server STREAM->STREAM.
+$result = system
+ "runcon -t test_sctp_client_t $basedir/sctp_client -e nopeer stream ::1 1035";
+ok( $result eq 0 );
+
+# Verify that a client without peer { recv } permission cannot communicate with the server STREAM->STREAM.
+$result = system
+"runcon -t test_sctp_deny_peer_client_t -- $basedir/sctp_client -e nopeer stream ::1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Kill the stream server.
+kill TERM, $pid;
+
+# Start the seq server.
+if ( ( $pid = fork() ) == 0 ) {
+ exec "runcon -t test_sctp_server_t $basedir/sctp_server -n seq 1035";
+}
+select( undef, undef, undef, 0.25 ); # Give it a moment to initialize.
+
+# Verify that authorized client can communicate with the server SEQ->SEQ.
+$result = system
+"runcon -t test_sctp_client_t $basedir/sctp_client -e nopeer seq 127.0.0.1 1035";
+ok( $result eq 0 );
+
+# Verify that a client without peer { recv } permission cannot communicate with the server SEQ->SEQ.
+$result = system
+"runcon -t test_sctp_deny_peer_client_t -- $basedir/sctp_client -e nopeer seq 127.0.0.1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Verify that authorized client can communicate with the server SEQ->SEQ.
+$result = system
+ "runcon -t test_sctp_client_t $basedir/sctp_client -e nopeer seq ::1 1035";
+ok( $result eq 0 );
+
+# Verify that a client without peer { recv } permission cannot communicate with the server SEQ->SEQ.
+$result = system
+"runcon -t test_sctp_deny_peer_client_t -- $basedir/sctp_client -e nopeer seq ::1 1035 2>&1";
+ok( $result >> 8 eq 6 );
+
+# Kill the seq server.
+kill TERM, $pid;
+
+system "/bin/sh $basedir/iptables-flush";
+
+exit;
--
2.14.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] selinux-testsuite: Add SCTP test support
2018-03-20 17:48 [PATCH] selinux-testsuite: Add SCTP test support Richard Haines
@ 2018-05-30 20:42 ` Paul Moore
2018-05-31 20:26 ` Richard Haines
0 siblings, 1 reply; 3+ messages in thread
From: Paul Moore @ 2018-05-30 20:42 UTC (permalink / raw)
To: Richard Haines; +Cc: selinux
On Tue, Mar 20, 2018 at 1:48 PM, Richard Haines via Selinux
<selinux@tycho.nsa.gov> wrote:
> The sctp testsuite tests all new sctp SELinux functionality.
>
> Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
Now that the new SELinux userspace is out, I applied this to my test
tree and noticed two problems at the start (both easily fixed):
* We need to list the lksctp-tools-devel package as a dependency in README.md
* Minor merge conflict in policy/Makefile
... actually running the test went rather well, but there was one test
failure: test #11, the "asconf parameter chunk processing". Looking a
bit closer at the failure, it appears that the address detection code
at the top of tests/sctp/test needs to be a bit more robust as
'hostname -I' returns multiple addresses, but they are a mix of IPv4
and IPv6 - all on one interface.
I would suggest taking a look at parsing the output of 'ip -o addr
show up scope global' and using that instead of 'hostname -I'.
--
paul moore
www.paul-moore.com
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] selinux-testsuite: Add SCTP test support
2018-05-30 20:42 ` Paul Moore
@ 2018-05-31 20:26 ` Richard Haines
0 siblings, 0 replies; 3+ messages in thread
From: Richard Haines @ 2018-05-31 20:26 UTC (permalink / raw)
To: Paul Moore; +Cc: selinux
On Wed, 2018-05-30 at 16:42 -0400, Paul Moore wrote:
> On Tue, Mar 20, 2018 at 1:48 PM, Richard Haines via Selinux
> <selinux@tycho.nsa.gov> wrote:
> > The sctp testsuite tests all new sctp SELinux functionality.
> >
> > Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
>
> Now that the new SELinux userspace is out, I applied this to my test
> tree and noticed two problems at the start (both easily fixed):
>
> * We need to list the lksctp-tools-devel package as a dependency in
> README.md
> * Minor merge conflict in policy/Makefile
>
> ... actually running the test went rather well, but there was one
> test
> failure: test #11, the "asconf parameter chunk processing". Looking
> a
> bit closer at the failure, it appears that the address detection code
> at the top of tests/sctp/test needs to be a bit more robust as
> 'hostname -I' returns multiple addresses, but they are a mix of IPv4
> and IPv6 - all on one interface.
>
> I would suggest taking a look at parsing the output of 'ip -o addr
> show up scope global' and using that instead of 'hostname -I'.
>
Thanks for the feedback, I'll fix these and post a new patch in a few
days.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-05-31 20:26 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-20 17:48 [PATCH] selinux-testsuite: Add SCTP test support Richard Haines
2018-05-30 20:42 ` Paul Moore
2018-05-31 20:26 ` Richard Haines
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.