All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>,
	kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org
Cc: Christoffer Dall <cdall@cs.columbia.edu>,
	Christoffer Dall <christoffer.dall@linaro.org>,
	Shunyong Yang <shunyong.yang@hxt-semitech.com>,
	Julien Thierry <julien.thierry@arm.com>,
	Andre Przywara <andre.przywara@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Shih-Wei Li <shihwei@cs.columbia.edu>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Dave Martin <Dave.Martin@arm.com>
Subject: [PATCH 16/85] KVM: arm64: Avoid storing the vcpu pointer on the stack
Date: Wed, 28 Mar 2018 13:51:45 +0100	[thread overview]
Message-ID: <20180328125254.31380-17-marc.zyngier@arm.com> (raw)
In-Reply-To: <20180328125254.31380-1-marc.zyngier@arm.com>

From: Christoffer Dall <christoffer.dall@linaro.org>

We already have the percpu area for the host cpu state, which points to
the VCPU, so there's no need to store the VCPU pointer on the stack on
every context switch.  We can be a little more clever and just use
tpidr_el2 for the percpu offset and load the VCPU pointer from the host
context.

This has the benefit of being able to retrieve the host context even
when our stack is corrupted, and it has a potential performance benefit
because we trade a store plus a load for an mrs and a load on a round
trip to the guest.

This does require us to calculate the percpu offset without including
the offset from the kernel mapping of the percpu array to the linear
mapping of the array (which is what we store in tpidr_el1), because a
PC-relative generated address in EL2 is already giving us the hyp alias
of the linear mapping of a kernel address.  We do this in
__cpu_init_hyp_mode() by using kvm_ksym_ref().

The code that accesses ESR_EL2 was previously using an alternative to
use the _EL1 accessor on VHE systems, but this was actually unnecessary
as the _EL1 accessor aliases the ESR_EL2 register on VHE, and the _EL2
accessor does the same thing on both systems.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm64/include/asm/kvm_asm.h  | 15 +++++++++++++++
 arch/arm64/include/asm/kvm_host.h | 15 +++++++++++++++
 arch/arm64/kernel/asm-offsets.c   |  1 +
 arch/arm64/kvm/hyp/entry.S        |  6 +-----
 arch/arm64/kvm/hyp/hyp-entry.S    | 28 ++++++++++------------------
 arch/arm64/kvm/hyp/switch.c       |  5 +----
 arch/arm64/kvm/hyp/sysreg-sr.c    |  5 +++++
 7 files changed, 48 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index 24961b732e65..7149f1520382 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -33,6 +33,7 @@
 #define KVM_ARM64_DEBUG_DIRTY_SHIFT	0
 #define KVM_ARM64_DEBUG_DIRTY		(1 << KVM_ARM64_DEBUG_DIRTY_SHIFT)
 
+/* Translate a kernel address of @sym into its equivalent linear mapping */
 #define kvm_ksym_ref(sym)						\
 	({								\
 		void *val = &sym;					\
@@ -70,6 +71,20 @@ extern u32 __init_stage2_translation(void);
 
 extern void __qcom_hyp_sanitize_btac_predictors(void);
 
+#else /* __ASSEMBLY__ */
+
+.macro get_host_ctxt reg, tmp
+	adr_l	\reg, kvm_host_cpu_state
+	mrs	\tmp, tpidr_el2
+	add	\reg, \reg, \tmp
+.endm
+
+.macro get_vcpu_ptr vcpu, ctxt
+	get_host_ctxt \ctxt, \vcpu
+	ldr	\vcpu, [\ctxt, #HOST_CONTEXT_VCPU]
+	kern_hyp_va	\vcpu
+.endm
+
 #endif
 
 #endif /* __ARM_KVM_ASM_H__ */
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 596f8e414a4c..618cfee7206a 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -358,10 +358,15 @@ int kvm_perf_teardown(void);
 
 struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
 
+void __kvm_set_tpidr_el2(u64 tpidr_el2);
+DECLARE_PER_CPU(kvm_cpu_context_t, kvm_host_cpu_state);
+
 static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
 				       unsigned long hyp_stack_ptr,
 				       unsigned long vector_ptr)
 {
+	u64 tpidr_el2;
+
 	/*
 	 * Call initialization code, and switch to the full blown HYP code.
 	 * If the cpucaps haven't been finalized yet, something has gone very
@@ -370,6 +375,16 @@ static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
 	 */
 	BUG_ON(!static_branch_likely(&arm64_const_caps_ready));
 	__kvm_call_hyp((void *)pgd_ptr, hyp_stack_ptr, vector_ptr);
+
+	/*
+	 * Calculate the raw per-cpu offset without a translation from the
+	 * kernel's mapping to the linear mapping, and store it in tpidr_el2
+	 * so that we can use adr_l to access per-cpu variables in EL2.
+	 */
+	tpidr_el2 = (u64)this_cpu_ptr(&kvm_host_cpu_state)
+		- (u64)kvm_ksym_ref(kvm_host_cpu_state);
+
+	kvm_call_hyp(__kvm_set_tpidr_el2, tpidr_el2);
 }
 
 static inline void kvm_arch_hardware_unsetup(void) {}
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 1303e04110cd..78e1b0a70aaf 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -138,6 +138,7 @@ int main(void)
   DEFINE(CPU_FP_REGS,		offsetof(struct kvm_regs, fp_regs));
   DEFINE(VCPU_FPEXC32_EL2,	offsetof(struct kvm_vcpu, arch.ctxt.sys_regs[FPEXC32_EL2]));
   DEFINE(VCPU_HOST_CONTEXT,	offsetof(struct kvm_vcpu, arch.host_cpu_context));
+  DEFINE(HOST_CONTEXT_VCPU,	offsetof(struct kvm_cpu_context, __hyp_running_vcpu));
 #endif
 #ifdef CONFIG_CPU_PM
   DEFINE(CPU_SUSPEND_SZ,	sizeof(struct cpu_suspend_ctx));
diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
index fdd1068ee3a5..1f458f7c3b44 100644
--- a/arch/arm64/kvm/hyp/entry.S
+++ b/arch/arm64/kvm/hyp/entry.S
@@ -62,9 +62,6 @@ ENTRY(__guest_enter)
 	// Store the host regs
 	save_callee_saved_regs x1
 
-	// Store host_ctxt and vcpu for use at exit time
-	stp	x1, x0, [sp, #-16]!
-
 	add	x18, x0, #VCPU_CONTEXT
 
 	// Restore guest regs x0-x17
@@ -118,8 +115,7 @@ ENTRY(__guest_exit)
 	// Store the guest regs x19-x29, lr
 	save_callee_saved_regs x1
 
-	// Restore the host_ctxt from the stack
-	ldr	x2, [sp], #16
+	get_host_ctxt	x2, x3
 
 	// Now restore the host regs
 	restore_callee_saved_regs x2
diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S
index f36464bd57c5..82fbc368f738 100644
--- a/arch/arm64/kvm/hyp/hyp-entry.S
+++ b/arch/arm64/kvm/hyp/hyp-entry.S
@@ -57,13 +57,8 @@ ENDPROC(__vhe_hyp_call)
 el1_sync:				// Guest trapped into EL2
 	stp	x0, x1, [sp, #-16]!
 
-alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
-	mrs	x1, esr_el2
-alternative_else
-	mrs	x1, esr_el1
-alternative_endif
-	lsr	x0, x1, #ESR_ELx_EC_SHIFT
-
+	mrs	x0, esr_el2
+	lsr	x0, x0, #ESR_ELx_EC_SHIFT
 	cmp	x0, #ESR_ELx_EC_HVC64
 	ccmp	x0, #ESR_ELx_EC_HVC32, #4, ne
 	b.ne	el1_trap
@@ -117,10 +112,14 @@ el1_hvc_guest:
 	eret
 
 el1_trap:
+	get_vcpu_ptr	x1, x0
+
+	mrs		x0, esr_el2
+	lsr		x0, x0, #ESR_ELx_EC_SHIFT
 	/*
 	 * x0: ESR_EC
+	 * x1: vcpu pointer
 	 */
-	ldr	x1, [sp, #16 + 8]	// vcpu stored by __guest_enter
 
 	/*
 	 * We trap the first access to the FP/SIMD to save the host context
@@ -138,13 +137,13 @@ alternative_else_nop_endif
 
 el1_irq:
 	stp     x0, x1, [sp, #-16]!
-	ldr	x1, [sp, #16 + 8]
+	get_vcpu_ptr	x1, x0
 	mov	x0, #ARM_EXCEPTION_IRQ
 	b	__guest_exit
 
 el1_error:
 	stp     x0, x1, [sp, #-16]!
-	ldr	x1, [sp, #16 + 8]
+	get_vcpu_ptr	x1, x0
 	mov	x0, #ARM_EXCEPTION_EL1_SERROR
 	b	__guest_exit
 
@@ -180,14 +179,7 @@ ENTRY(__hyp_do_panic)
 ENDPROC(__hyp_do_panic)
 
 ENTRY(__hyp_panic)
-	/*
-	 * '=kvm_host_cpu_state' is a host VA from the constant pool, it may
-	 * not be accessible by this address from EL2, hyp_panic() converts
-	 * it with kern_hyp_va() before use.
-	 */
-	ldr	x0, =kvm_host_cpu_state
-	mrs	x1, tpidr_el2
-	add	x0, x0, x1
+	get_host_ctxt x0, x1
 	b	hyp_panic
 ENDPROC(__hyp_panic)
 
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 24f52fedfb9e..46717da75643 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -469,7 +469,7 @@ static hyp_alternate_select(__hyp_call_panic,
 			    __hyp_call_panic_nvhe, __hyp_call_panic_vhe,
 			    ARM64_HAS_VIRT_HOST_EXTN);
 
-void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *__host_ctxt)
+void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *host_ctxt)
 {
 	struct kvm_vcpu *vcpu = NULL;
 
@@ -478,9 +478,6 @@ void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *__host_ctxt)
 	u64 par = read_sysreg(par_el1);
 
 	if (read_sysreg(vttbr_el2)) {
-		struct kvm_cpu_context *host_ctxt;
-
-		host_ctxt = kern_hyp_va(__host_ctxt);
 		vcpu = host_ctxt->__hyp_running_vcpu;
 		__timer_disable_traps(vcpu);
 		__deactivate_traps(vcpu);
diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c
index 2c17afd2be96..43b7dd65e3e6 100644
--- a/arch/arm64/kvm/hyp/sysreg-sr.c
+++ b/arch/arm64/kvm/hyp/sysreg-sr.c
@@ -189,3 +189,8 @@ void __hyp_text __sysreg32_restore_state(struct kvm_vcpu *vcpu)
 	if (vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
 		write_sysreg(sysreg[DBGVCR32_EL2], dbgvcr32_el2);
 }
+
+void __hyp_text __kvm_set_tpidr_el2(u64 tpidr_el2)
+{
+	asm("msr tpidr_el2, %0": : "r" (tpidr_el2));
+}
-- 
2.14.2

WARNING: multiple messages have this Message-ID (diff)
From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 16/85] KVM: arm64: Avoid storing the vcpu pointer on the stack
Date: Wed, 28 Mar 2018 13:51:45 +0100	[thread overview]
Message-ID: <20180328125254.31380-17-marc.zyngier@arm.com> (raw)
In-Reply-To: <20180328125254.31380-1-marc.zyngier@arm.com>

From: Christoffer Dall <christoffer.dall@linaro.org>

We already have the percpu area for the host cpu state, which points to
the VCPU, so there's no need to store the VCPU pointer on the stack on
every context switch.  We can be a little more clever and just use
tpidr_el2 for the percpu offset and load the VCPU pointer from the host
context.

This has the benefit of being able to retrieve the host context even
when our stack is corrupted, and it has a potential performance benefit
because we trade a store plus a load for an mrs and a load on a round
trip to the guest.

This does require us to calculate the percpu offset without including
the offset from the kernel mapping of the percpu array to the linear
mapping of the array (which is what we store in tpidr_el1), because a
PC-relative generated address in EL2 is already giving us the hyp alias
of the linear mapping of a kernel address.  We do this in
__cpu_init_hyp_mode() by using kvm_ksym_ref().

The code that accesses ESR_EL2 was previously using an alternative to
use the _EL1 accessor on VHE systems, but this was actually unnecessary
as the _EL1 accessor aliases the ESR_EL2 register on VHE, and the _EL2
accessor does the same thing on both systems.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm64/include/asm/kvm_asm.h  | 15 +++++++++++++++
 arch/arm64/include/asm/kvm_host.h | 15 +++++++++++++++
 arch/arm64/kernel/asm-offsets.c   |  1 +
 arch/arm64/kvm/hyp/entry.S        |  6 +-----
 arch/arm64/kvm/hyp/hyp-entry.S    | 28 ++++++++++------------------
 arch/arm64/kvm/hyp/switch.c       |  5 +----
 arch/arm64/kvm/hyp/sysreg-sr.c    |  5 +++++
 7 files changed, 48 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index 24961b732e65..7149f1520382 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -33,6 +33,7 @@
 #define KVM_ARM64_DEBUG_DIRTY_SHIFT	0
 #define KVM_ARM64_DEBUG_DIRTY		(1 << KVM_ARM64_DEBUG_DIRTY_SHIFT)
 
+/* Translate a kernel address of @sym into its equivalent linear mapping */
 #define kvm_ksym_ref(sym)						\
 	({								\
 		void *val = &sym;					\
@@ -70,6 +71,20 @@ extern u32 __init_stage2_translation(void);
 
 extern void __qcom_hyp_sanitize_btac_predictors(void);
 
+#else /* __ASSEMBLY__ */
+
+.macro get_host_ctxt reg, tmp
+	adr_l	\reg, kvm_host_cpu_state
+	mrs	\tmp, tpidr_el2
+	add	\reg, \reg, \tmp
+.endm
+
+.macro get_vcpu_ptr vcpu, ctxt
+	get_host_ctxt \ctxt, \vcpu
+	ldr	\vcpu, [\ctxt, #HOST_CONTEXT_VCPU]
+	kern_hyp_va	\vcpu
+.endm
+
 #endif
 
 #endif /* __ARM_KVM_ASM_H__ */
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 596f8e414a4c..618cfee7206a 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -358,10 +358,15 @@ int kvm_perf_teardown(void);
 
 struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
 
+void __kvm_set_tpidr_el2(u64 tpidr_el2);
+DECLARE_PER_CPU(kvm_cpu_context_t, kvm_host_cpu_state);
+
 static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
 				       unsigned long hyp_stack_ptr,
 				       unsigned long vector_ptr)
 {
+	u64 tpidr_el2;
+
 	/*
 	 * Call initialization code, and switch to the full blown HYP code.
 	 * If the cpucaps haven't been finalized yet, something has gone very
@@ -370,6 +375,16 @@ static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
 	 */
 	BUG_ON(!static_branch_likely(&arm64_const_caps_ready));
 	__kvm_call_hyp((void *)pgd_ptr, hyp_stack_ptr, vector_ptr);
+
+	/*
+	 * Calculate the raw per-cpu offset without a translation from the
+	 * kernel's mapping to the linear mapping, and store it in tpidr_el2
+	 * so that we can use adr_l to access per-cpu variables in EL2.
+	 */
+	tpidr_el2 = (u64)this_cpu_ptr(&kvm_host_cpu_state)
+		- (u64)kvm_ksym_ref(kvm_host_cpu_state);
+
+	kvm_call_hyp(__kvm_set_tpidr_el2, tpidr_el2);
 }
 
 static inline void kvm_arch_hardware_unsetup(void) {}
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 1303e04110cd..78e1b0a70aaf 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -138,6 +138,7 @@ int main(void)
   DEFINE(CPU_FP_REGS,		offsetof(struct kvm_regs, fp_regs));
   DEFINE(VCPU_FPEXC32_EL2,	offsetof(struct kvm_vcpu, arch.ctxt.sys_regs[FPEXC32_EL2]));
   DEFINE(VCPU_HOST_CONTEXT,	offsetof(struct kvm_vcpu, arch.host_cpu_context));
+  DEFINE(HOST_CONTEXT_VCPU,	offsetof(struct kvm_cpu_context, __hyp_running_vcpu));
 #endif
 #ifdef CONFIG_CPU_PM
   DEFINE(CPU_SUSPEND_SZ,	sizeof(struct cpu_suspend_ctx));
diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
index fdd1068ee3a5..1f458f7c3b44 100644
--- a/arch/arm64/kvm/hyp/entry.S
+++ b/arch/arm64/kvm/hyp/entry.S
@@ -62,9 +62,6 @@ ENTRY(__guest_enter)
 	// Store the host regs
 	save_callee_saved_regs x1
 
-	// Store host_ctxt and vcpu for use@exit time
-	stp	x1, x0, [sp, #-16]!
-
 	add	x18, x0, #VCPU_CONTEXT
 
 	// Restore guest regs x0-x17
@@ -118,8 +115,7 @@ ENTRY(__guest_exit)
 	// Store the guest regs x19-x29, lr
 	save_callee_saved_regs x1
 
-	// Restore the host_ctxt from the stack
-	ldr	x2, [sp], #16
+	get_host_ctxt	x2, x3
 
 	// Now restore the host regs
 	restore_callee_saved_regs x2
diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S
index f36464bd57c5..82fbc368f738 100644
--- a/arch/arm64/kvm/hyp/hyp-entry.S
+++ b/arch/arm64/kvm/hyp/hyp-entry.S
@@ -57,13 +57,8 @@ ENDPROC(__vhe_hyp_call)
 el1_sync:				// Guest trapped into EL2
 	stp	x0, x1, [sp, #-16]!
 
-alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
-	mrs	x1, esr_el2
-alternative_else
-	mrs	x1, esr_el1
-alternative_endif
-	lsr	x0, x1, #ESR_ELx_EC_SHIFT
-
+	mrs	x0, esr_el2
+	lsr	x0, x0, #ESR_ELx_EC_SHIFT
 	cmp	x0, #ESR_ELx_EC_HVC64
 	ccmp	x0, #ESR_ELx_EC_HVC32, #4, ne
 	b.ne	el1_trap
@@ -117,10 +112,14 @@ el1_hvc_guest:
 	eret
 
 el1_trap:
+	get_vcpu_ptr	x1, x0
+
+	mrs		x0, esr_el2
+	lsr		x0, x0, #ESR_ELx_EC_SHIFT
 	/*
 	 * x0: ESR_EC
+	 * x1: vcpu pointer
 	 */
-	ldr	x1, [sp, #16 + 8]	// vcpu stored by __guest_enter
 
 	/*
 	 * We trap the first access to the FP/SIMD to save the host context
@@ -138,13 +137,13 @@ alternative_else_nop_endif
 
 el1_irq:
 	stp     x0, x1, [sp, #-16]!
-	ldr	x1, [sp, #16 + 8]
+	get_vcpu_ptr	x1, x0
 	mov	x0, #ARM_EXCEPTION_IRQ
 	b	__guest_exit
 
 el1_error:
 	stp     x0, x1, [sp, #-16]!
-	ldr	x1, [sp, #16 + 8]
+	get_vcpu_ptr	x1, x0
 	mov	x0, #ARM_EXCEPTION_EL1_SERROR
 	b	__guest_exit
 
@@ -180,14 +179,7 @@ ENTRY(__hyp_do_panic)
 ENDPROC(__hyp_do_panic)
 
 ENTRY(__hyp_panic)
-	/*
-	 * '=kvm_host_cpu_state' is a host VA from the constant pool, it may
-	 * not be accessible by this address from EL2, hyp_panic() converts
-	 * it with kern_hyp_va() before use.
-	 */
-	ldr	x0, =kvm_host_cpu_state
-	mrs	x1, tpidr_el2
-	add	x0, x0, x1
+	get_host_ctxt x0, x1
 	b	hyp_panic
 ENDPROC(__hyp_panic)
 
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 24f52fedfb9e..46717da75643 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -469,7 +469,7 @@ static hyp_alternate_select(__hyp_call_panic,
 			    __hyp_call_panic_nvhe, __hyp_call_panic_vhe,
 			    ARM64_HAS_VIRT_HOST_EXTN);
 
-void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *__host_ctxt)
+void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *host_ctxt)
 {
 	struct kvm_vcpu *vcpu = NULL;
 
@@ -478,9 +478,6 @@ void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *__host_ctxt)
 	u64 par = read_sysreg(par_el1);
 
 	if (read_sysreg(vttbr_el2)) {
-		struct kvm_cpu_context *host_ctxt;
-
-		host_ctxt = kern_hyp_va(__host_ctxt);
 		vcpu = host_ctxt->__hyp_running_vcpu;
 		__timer_disable_traps(vcpu);
 		__deactivate_traps(vcpu);
diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c
index 2c17afd2be96..43b7dd65e3e6 100644
--- a/arch/arm64/kvm/hyp/sysreg-sr.c
+++ b/arch/arm64/kvm/hyp/sysreg-sr.c
@@ -189,3 +189,8 @@ void __hyp_text __sysreg32_restore_state(struct kvm_vcpu *vcpu)
 	if (vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
 		write_sysreg(sysreg[DBGVCR32_EL2], dbgvcr32_el2);
 }
+
+void __hyp_text __kvm_set_tpidr_el2(u64 tpidr_el2)
+{
+	asm("msr tpidr_el2, %0": : "r" (tpidr_el2));
+}
-- 
2.14.2

  parent reply	other threads:[~2018-03-28 12:51 UTC|newest]

Thread overview: 174+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-28 12:51 [GIT PULL] KVM/ARM updates for v4.17 Marc Zyngier
2018-03-28 12:51 ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 01/85] KVM: arm/arm64: Fix arch timers with userspace irqchips Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 02/85] ARM: kvm: fix building with gcc-8 Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 03/85] arm64/kvm: Prohibit guest LOR accesses Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 04/85] arm64: KVM: Move CPU ID reg trap setup off the world switch path Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 05/85] KVM: arm64: Enable the EL1 physical timer for AArch32 guests Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 06/85] KVM: arm: Enable emulation of the physical timer Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 07/85] KVM: arm/arm64: No need to zero CNTVOFF in kvm_timer_vcpu_put() for VHE Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 08/85] KVM: arm/arm64: vgic: Add missing irq_lock to vgic_mmio_read_pending Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 09/85] KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUN Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 10/85] KVM: arm/arm64: Reset mapped IRQs on VM reset Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 11/85] KVM: arm/arm64: Reduce verbosity of KVM init log Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 12/85] KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 13/85] kvm: arm/arm64: vgic-v3: Tighten synchronization for guests using v2 on v3 Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 14/85] KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUN Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 15/85] KVM: arm/arm64: Move vcpu_load call after kvm_vcpu_first_run_init Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` Marc Zyngier [this message]
2018-03-28 12:51   ` [PATCH 16/85] KVM: arm64: Avoid storing the vcpu pointer on the stack Marc Zyngier
2018-03-28 12:51 ` [PATCH 17/85] KVM: arm64: Rework hyp_panic for VHE and non-VHE Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 18/85] KVM: arm64: Move HCR_INT_OVERRIDE to default HCR_EL2 guest flag Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 19/85] KVM: arm/arm64: Get rid of vcpu->arch.irq_lines Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 20/85] KVM: arm/arm64: Add kvm_vcpu_load_sysregs and kvm_vcpu_put_sysregs Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 21/85] KVM: arm/arm64: Introduce vcpu_el1_is_32bit Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 22/85] KVM: arm64: Move debug dirty flag calculation out of world switch Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 23/85] KVM: arm64: Slightly improve debug save/restore functions Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 24/85] KVM: arm64: Improve debug register save/restore flow Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 25/85] KVM: arm64: Factor out fault info population and gic workarounds Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 26/85] KVM: arm64: Introduce VHE-specific kvm_vcpu_run Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 27/85] KVM: arm64: Remove kern_hyp_va() use in VHE switch function Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 28/85] KVM: arm64: Don't deactivate VM on VHE systems Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 29/85] KVM: arm64: Remove noop calls to timer save/restore from VHE switch Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:51 ` [PATCH 30/85] KVM: arm64: Move userspace system registers into separate function Marc Zyngier
2018-03-28 12:51   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 31/85] KVM: arm64: Rewrite sysreg alternatives to static keys Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 32/85] KVM: arm64: Introduce separate VHE/non-VHE sysreg save/restore functions Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 33/85] KVM: arm/arm64: Remove leftover comment from kvm_vcpu_run_vhe Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 34/85] KVM: arm64: Unify non-VHE host/guest sysreg save and restore functions Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 35/85] KVM: arm64: Don't save the host ELR_EL2 and SPSR_EL2 on VHE systems Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 36/85] KVM: arm64: Change 32-bit handling of VM system registers Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 37/85] KVM: arm64: Rewrite system register accessors to read/write functions Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 38/85] KVM: arm64: Introduce framework for accessing deferred sysregs Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 39/85] KVM: arm/arm64: Prepare to handle deferred save/restore of SPSR_EL1 Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 40/85] KVM: arm64: Prepare to handle deferred save/restore of ELR_EL1 Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 41/85] KVM: arm64: Defer saving/restoring 64-bit sysregs to vcpu load/put on VHE Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 42/85] KVM: arm64: Prepare to handle deferred save/restore of 32-bit registers Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 43/85] KVM: arm64: Defer saving/restoring 32-bit sysregs to vcpu load/put Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 44/85] KVM: arm64: Move common VHE/non-VHE trap config in separate functions Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 45/85] KVM: arm64: Directly call VHE and non-VHE FPSIMD enabled functions Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 46/85] KVM: arm64: Configure c15, PMU, and debug register traps on cpu load/put for VHE Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 47/85] KVM: arm64: Cleanup __activate_traps and __deactive_traps for VHE and non-VHE Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 48/85] KVM: arm/arm64: Get rid of vgic_elrsr Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 49/85] KVM: arm/arm64: Handle VGICv2 save/restore from the main VGIC code Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 50/85] KVM: arm/arm64: Move arm64-only vgic-v2-sr.c file to arm64 Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 51/85] KVM: arm/arm64: Handle VGICv3 save/restore from the main VGIC code on VHE Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 52/85] KVM: arm/arm64: Move VGIC APR save/restore to vgic put/load Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 53/85] KVM: arm/arm64: Avoid VGICv3 save/restore on VHE with no IRQs Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 54/85] arm64: alternatives: Add dynamic patching feature Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 55/85] arm64: insn: Add N immediate encoding Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 56/85] arm64: insn: Add encoder for bitwise operations using literals Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 57/85] arm64: KVM: Dynamically patch the kernel/hyp VA mask Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 58/85] arm64: cpufeatures: Drop the ARM64_HYP_OFFSET_LOW feature flag Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 59/85] KVM: arm/arm64: Do not use kern_hyp_va() with kvm_vgic_global_state Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 60/85] KVM: arm/arm64: Demote HYP VA range display to being a debug feature Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 61/85] KVM: arm/arm64: Move ioremap calls to create_hyp_io_mappings Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 62/85] KVM: arm/arm64: Keep GICv2 HYP VAs in kvm_vgic_global_state Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 63/85] KVM: arm/arm64: Fix idmap size and alignment Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 64/85] KVM: arm64: Fix HYP idmap unmap when using 52bit PA Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 65/85] KVM: arm/arm64: Move HYP IO VAs to the "idmap" range Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 66/85] arm64; insn: Add encoder for the EXTR instruction Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 67/85] arm64: insn: Allow ADD/SUB (immediate) with LSL #12 Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 68/85] arm64: KVM: Dynamically compute the HYP VA mask Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 69/85] arm64: KVM: Introduce EL2 VA randomisation Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 70/85] arm64: Update the KVM memory map documentation Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 71/85] arm64: KVM: Move vector offsetting from hyp-init.S to kvm_get_hyp_vector Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 72/85] arm64: KVM: Move stashing of x0/x1 into the vector code itself Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 73/85] arm64: KVM: Move BP hardening vectors into .hyp.text section Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 74/85] arm64: KVM: Reserve 4 additional instructions in the BPI template Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 75/85] arm64: KVM: Allow far branches from vector slots to the main vectors Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 76/85] arm/arm64: KVM: Introduce EL2-specific executable mappings Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 77/85] arm64: Make BP hardening slot counter available Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 78/85] arm64: KVM: Allow mapping of vectors outside of the RAM region Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 79/85] arm64: Enable ARM64_HARDEN_EL2_VECTORS on Cortex-A57 and A72 Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 80/85] KVM: arm: Reserve bit in KVM_REG_ARM encoding for secure/nonsecure Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 81/85] arm64: KVM: Use SMCCC_ARCH_WORKAROUND_1 for Falkor BP hardening Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 82/85] KVM: arm/arm64: vgic: Disallow Active+Pending for level interrupts Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 83/85] KVM: arm/arm64: vgic-its: Fix potential overrun in vgic_copy_lpi_list Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 84/85] Revert "arm64: KVM: Use SMCCC_ARCH_WORKAROUND_1 for Falkor BP hardening" Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 12:52 ` [PATCH 85/85] arm64: Add temporary ERRATA_MIDR_ALL_VERSIONS compatibility macro Marc Zyngier
2018-03-28 12:52   ` Marc Zyngier
2018-03-28 20:00 ` [GIT PULL] KVM/ARM updates for v4.17 Radim Krčmář
2018-03-28 20:00   ` Radim Krčmář

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180328125254.31380-17-marc.zyngier@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=Dave.Martin@arm.com \
    --cc=andre.przywara@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=cdall@cs.columbia.edu \
    --cc=christoffer.dall@linaro.org \
    --cc=julien.thierry@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    --cc=shihwei@cs.columbia.edu \
    --cc=shunyong.yang@hxt-semitech.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.