From: srinivas.kandagatla@linaro.org To: andy.gross@linaro.org, broonie@kernel.org, linux-arm-msm@vger.kernel.org, alsa-devel@alsa-project.org, robh+dt@kernel.org, bgoswami@codeaurora.org Cc: gregkh@linuxfoundation.org, david.brown@linaro.org, mark.rutland@arm.com, lgirdwood@gmail.com, plai@codeaurora.org, tiwai@suse.com, perex@perex.cz, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, rohkumar@qti.qualcomm.com, spatakok@qti.qualcomm.com, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Subject: [PATCH v6 10/24] ASoC: qdsp6: qdafe: Add SLIMBus port Support Date: Thu, 26 Apr 2018 10:45:52 +0100 [thread overview] Message-ID: <20180426094606.4775-11-srinivas.kandagatla@linaro.org> (raw) In-Reply-To: <20180426094606.4775-1-srinivas.kandagatla@linaro.org> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> This patch adds support to 6 SLIMBus AFE ports, which are used as backend dais. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org> --- sound/soc/qcom/qdsp6/q6afe.c | 129 +++++++++++++++++++++++++++++++++++++++++++ sound/soc/qcom/qdsp6/q6afe.h | 14 +++++ 2 files changed, 143 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c index 31a4e2683e35..d8ba2d5dc724 100644 --- a/sound/soc/qcom/qdsp6/q6afe.c +++ b/sound/soc/qcom/qdsp6/q6afe.c @@ -26,9 +26,45 @@ #define AFE_PARAM_ID_HDMI_CONFIG 0x00010210 #define AFE_MODULE_AUDIO_DEV_INTERFACE 0x0001020C +#define AFE_PARAM_ID_CDC_SLIMBUS_SLAVE_CFG 0x00010235 + +#define AFE_PARAM_ID_SLIMBUS_CONFIG 0x00010212 + /* Port IDs */ #define AFE_API_VERSION_HDMI_CONFIG 0x1 #define AFE_PORT_ID_MULTICHAN_HDMI_RX 0x100E + +#define AFE_API_VERSION_SLIMBUS_CONFIG 0x1 + +/* SLIMbus Rx port on channel 0. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX 0x4000 +/* SLIMbus Tx port on channel 0. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_TX 0x4001 +/* SLIMbus Rx port on channel 1. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_RX 0x4002 +/* SLIMbus Tx port on channel 1. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_TX 0x4003 +/* SLIMbus Rx port on channel 2. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_RX 0x4004 +/* SLIMbus Tx port on channel 2. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_TX 0x4005 +/* SLIMbus Rx port on channel 3. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_RX 0x4006 +/* SLIMbus Tx port on channel 3. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_TX 0x4007 +/* SLIMbus Rx port on channel 4. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_RX 0x4008 +/* SLIMbus Tx port on channel 4. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_TX 0x4009 +/* SLIMbus Rx port on channel 5. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_RX 0x400a +/* SLIMbus Tx port on channel 5. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_TX 0x400b +/* SLIMbus Rx port on channel 6. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX 0x400c +/* SLIMbus Tx port on channel 6. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX 0x400d + #define TIMEOUT_MS 1000 #define AFE_CMD_RESP_AVAIL 0 #define AFE_CMD_RESP_NONE 1 @@ -81,8 +117,53 @@ struct afe_param_id_hdmi_multi_chan_audio_cfg { u16 reserved; } __packed; +struct afe_param_id_slimbus_cfg { + u32 sb_cfg_minor_version; +/* Minor version used for tracking the version of the SLIMBUS + * configuration interface. + * Supported values: #AFE_API_VERSION_SLIMBUS_CONFIG + */ + + u16 slimbus_dev_id; +/* SLIMbus hardware device ID, which is required to handle + * multiple SLIMbus hardware blocks. + * Supported values: - #AFE_SLIMBUS_DEVICE_1 - #AFE_SLIMBUS_DEVICE_2 + */ + u16 bit_width; +/* Bit width of the sample. + * Supported values: 16, 24 + */ + u16 data_format; +/* Data format supported by the SLIMbus hardware. The default is + * 0 (#AFE_SB_DATA_FORMAT_NOT_INDICATED), which indicates the + * hardware does not perform any format conversions before the data + * transfer. + */ + u16 num_channels; +/* Number of channels. + * Supported values: 1 to #AFE_PORT_MAX_AUDIO_CHAN_CNT + */ + u8 shared_ch_mapping[AFE_PORT_MAX_AUDIO_CHAN_CNT]; +/* Mapping of shared channel IDs (128 to 255) to which the + * master port is to be connected. + * Shared_channel_mapping[i] represents the shared channel assigned + * for audio channel i in multichannel audio data. + */ + u32 sample_rate; +/* Sampling rate of the port. + * Supported values: + * - #AFE_PORT_SAMPLE_RATE_8K + * - #AFE_PORT_SAMPLE_RATE_16K + * - #AFE_PORT_SAMPLE_RATE_48K + * - #AFE_PORT_SAMPLE_RATE_96K + * - #AFE_PORT_SAMPLE_RATE_192K + */ +} __packed; + + union afe_port_config { struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch; + struct afe_param_id_slimbus_cfg slim_cfg; } __packed; struct q6afe_port { @@ -118,6 +199,20 @@ struct afe_port_map { static struct afe_port_map port_maps[AFE_PORT_MAX] = { [HDMI_RX] = { AFE_PORT_ID_MULTICHAN_HDMI_RX, HDMI_RX, 1, 1}, + [SLIMBUS_0_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX, + SLIMBUS_0_RX, 1, 1}, + [SLIMBUS_1_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_RX, + SLIMBUS_1_RX, 1, 1}, + [SLIMBUS_2_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_RX, + SLIMBUS_2_RX, 1, 1}, + [SLIMBUS_3_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_RX, + SLIMBUS_3_RX, 1, 1}, + [SLIMBUS_4_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_RX, + SLIMBUS_4_RX, 1, 1}, + [SLIMBUS_5_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_RX, + SLIMBUS_5_RX, 1, 1}, + [SLIMBUS_6_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX, + SLIMBUS_6_RX, 1, 1}, }; static struct q6afe_port *afe_find_port(struct q6afe *afe, int token) @@ -311,6 +406,31 @@ int q6afe_port_stop(struct q6afe_port *port) } EXPORT_SYMBOL_GPL(q6afe_port_stop); +/** + * q6afe_slim_port_prepare() - Prepare slim afe port. + * + * @port: Instance of afe port + * @cfg: SLIM configuration for the afe port + * + */ +void q6afe_slim_port_prepare(struct q6afe_port *port, + struct q6afe_slim_cfg *cfg) +{ + union afe_port_config *pcfg = &port->port_cfg; + + pcfg->slim_cfg.sb_cfg_minor_version = AFE_API_VERSION_SLIMBUS_CONFIG; + pcfg->slim_cfg.sample_rate = cfg->sample_rate; + pcfg->slim_cfg.bit_width = cfg->bit_width; + pcfg->slim_cfg.num_channels = cfg->num_channels; + pcfg->slim_cfg.data_format = cfg->data_format; + pcfg->slim_cfg.shared_ch_mapping[0] = cfg->ch_mapping[0]; + pcfg->slim_cfg.shared_ch_mapping[1] = cfg->ch_mapping[1]; + pcfg->slim_cfg.shared_ch_mapping[2] = cfg->ch_mapping[2]; + pcfg->slim_cfg.shared_ch_mapping[3] = cfg->ch_mapping[3]; + +} +EXPORT_SYMBOL_GPL(q6afe_slim_port_prepare); + /** * q6afe_hdmi_port_prepare() - Prepare hdmi afe port. * @@ -404,6 +524,15 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id) case AFE_PORT_ID_MULTICHAN_HDMI_RX: cfg_type = AFE_PARAM_ID_HDMI_CONFIG; break; + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_RX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_RX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_RX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_RX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_RX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX: + cfg_type = AFE_PARAM_ID_SLIMBUS_CONFIG; + break; default: dev_err(dev, "Invalid port id 0x%x\n", port_id); return ERR_PTR(-EINVAL); diff --git a/sound/soc/qcom/qdsp6/q6afe.h b/sound/soc/qcom/qdsp6/q6afe.h index 3bd991a7c42d..5659966c6b1e 100644 --- a/sound/soc/qcom/qdsp6/q6afe.h +++ b/sound/soc/qcom/qdsp6/q6afe.h @@ -11,6 +11,9 @@ #define MSM_AFE_PORT_TYPE_TX 1 #define AFE_MAX_PORTS AFE_PORT_MAX +#define AFE_MAX_CHAN_COUNT 8 +#define AFE_PORT_MAX_AUDIO_CHAN_CNT 0x8 + struct q6afe_hdmi_cfg { u16 datatype; u16 channel_allocation; @@ -18,8 +21,17 @@ struct q6afe_hdmi_cfg { u16 bit_width; }; +struct q6afe_slim_cfg { + u32 sample_rate; + u16 bit_width; + u16 data_format; + u16 num_channels; + u8 ch_mapping[AFE_MAX_CHAN_COUNT]; +}; + struct q6afe_port_config { struct q6afe_hdmi_cfg hdmi; + struct q6afe_slim_cfg slim; }; struct q6afe_port; @@ -31,5 +43,7 @@ void q6afe_port_put(struct q6afe_port *port); int q6afe_get_port_id(int index); void q6afe_hdmi_port_prepare(struct q6afe_port *port, struct q6afe_hdmi_cfg *cfg); +void q6afe_slim_port_prepare(struct q6afe_port *port, + struct q6afe_slim_cfg *cfg); #endif /* __Q6AFE_H__ */ -- 2.16.2
WARNING: multiple messages have this Message-ID (diff)
From: srinivas.kandagatla@linaro.org (srinivas.kandagatla at linaro.org) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 10/24] ASoC: qdsp6: qdafe: Add SLIMBus port Support Date: Thu, 26 Apr 2018 10:45:52 +0100 [thread overview] Message-ID: <20180426094606.4775-11-srinivas.kandagatla@linaro.org> (raw) In-Reply-To: <20180426094606.4775-1-srinivas.kandagatla@linaro.org> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> This patch adds support to 6 SLIMBus AFE ports, which are used as backend dais. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org> --- sound/soc/qcom/qdsp6/q6afe.c | 129 +++++++++++++++++++++++++++++++++++++++++++ sound/soc/qcom/qdsp6/q6afe.h | 14 +++++ 2 files changed, 143 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c index 31a4e2683e35..d8ba2d5dc724 100644 --- a/sound/soc/qcom/qdsp6/q6afe.c +++ b/sound/soc/qcom/qdsp6/q6afe.c @@ -26,9 +26,45 @@ #define AFE_PARAM_ID_HDMI_CONFIG 0x00010210 #define AFE_MODULE_AUDIO_DEV_INTERFACE 0x0001020C +#define AFE_PARAM_ID_CDC_SLIMBUS_SLAVE_CFG 0x00010235 + +#define AFE_PARAM_ID_SLIMBUS_CONFIG 0x00010212 + /* Port IDs */ #define AFE_API_VERSION_HDMI_CONFIG 0x1 #define AFE_PORT_ID_MULTICHAN_HDMI_RX 0x100E + +#define AFE_API_VERSION_SLIMBUS_CONFIG 0x1 + +/* SLIMbus Rx port on channel 0. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX 0x4000 +/* SLIMbus Tx port on channel 0. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_TX 0x4001 +/* SLIMbus Rx port on channel 1. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_RX 0x4002 +/* SLIMbus Tx port on channel 1. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_TX 0x4003 +/* SLIMbus Rx port on channel 2. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_RX 0x4004 +/* SLIMbus Tx port on channel 2. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_TX 0x4005 +/* SLIMbus Rx port on channel 3. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_RX 0x4006 +/* SLIMbus Tx port on channel 3. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_TX 0x4007 +/* SLIMbus Rx port on channel 4. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_RX 0x4008 +/* SLIMbus Tx port on channel 4. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_TX 0x4009 +/* SLIMbus Rx port on channel 5. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_RX 0x400a +/* SLIMbus Tx port on channel 5. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_TX 0x400b +/* SLIMbus Rx port on channel 6. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX 0x400c +/* SLIMbus Tx port on channel 6. */ +#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX 0x400d + #define TIMEOUT_MS 1000 #define AFE_CMD_RESP_AVAIL 0 #define AFE_CMD_RESP_NONE 1 @@ -81,8 +117,53 @@ struct afe_param_id_hdmi_multi_chan_audio_cfg { u16 reserved; } __packed; +struct afe_param_id_slimbus_cfg { + u32 sb_cfg_minor_version; +/* Minor version used for tracking the version of the SLIMBUS + * configuration interface. + * Supported values: #AFE_API_VERSION_SLIMBUS_CONFIG + */ + + u16 slimbus_dev_id; +/* SLIMbus hardware device ID, which is required to handle + * multiple SLIMbus hardware blocks. + * Supported values: - #AFE_SLIMBUS_DEVICE_1 - #AFE_SLIMBUS_DEVICE_2 + */ + u16 bit_width; +/* Bit width of the sample. + * Supported values: 16, 24 + */ + u16 data_format; +/* Data format supported by the SLIMbus hardware. The default is + * 0 (#AFE_SB_DATA_FORMAT_NOT_INDICATED), which indicates the + * hardware does not perform any format conversions before the data + * transfer. + */ + u16 num_channels; +/* Number of channels. + * Supported values: 1 to #AFE_PORT_MAX_AUDIO_CHAN_CNT + */ + u8 shared_ch_mapping[AFE_PORT_MAX_AUDIO_CHAN_CNT]; +/* Mapping of shared channel IDs (128 to 255) to which the + * master port is to be connected. + * Shared_channel_mapping[i] represents the shared channel assigned + * for audio channel i in multichannel audio data. + */ + u32 sample_rate; +/* Sampling rate of the port. + * Supported values: + * - #AFE_PORT_SAMPLE_RATE_8K + * - #AFE_PORT_SAMPLE_RATE_16K + * - #AFE_PORT_SAMPLE_RATE_48K + * - #AFE_PORT_SAMPLE_RATE_96K + * - #AFE_PORT_SAMPLE_RATE_192K + */ +} __packed; + + union afe_port_config { struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch; + struct afe_param_id_slimbus_cfg slim_cfg; } __packed; struct q6afe_port { @@ -118,6 +199,20 @@ struct afe_port_map { static struct afe_port_map port_maps[AFE_PORT_MAX] = { [HDMI_RX] = { AFE_PORT_ID_MULTICHAN_HDMI_RX, HDMI_RX, 1, 1}, + [SLIMBUS_0_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX, + SLIMBUS_0_RX, 1, 1}, + [SLIMBUS_1_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_RX, + SLIMBUS_1_RX, 1, 1}, + [SLIMBUS_2_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_RX, + SLIMBUS_2_RX, 1, 1}, + [SLIMBUS_3_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_RX, + SLIMBUS_3_RX, 1, 1}, + [SLIMBUS_4_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_RX, + SLIMBUS_4_RX, 1, 1}, + [SLIMBUS_5_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_RX, + SLIMBUS_5_RX, 1, 1}, + [SLIMBUS_6_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX, + SLIMBUS_6_RX, 1, 1}, }; static struct q6afe_port *afe_find_port(struct q6afe *afe, int token) @@ -311,6 +406,31 @@ int q6afe_port_stop(struct q6afe_port *port) } EXPORT_SYMBOL_GPL(q6afe_port_stop); +/** + * q6afe_slim_port_prepare() - Prepare slim afe port. + * + * @port: Instance of afe port + * @cfg: SLIM configuration for the afe port + * + */ +void q6afe_slim_port_prepare(struct q6afe_port *port, + struct q6afe_slim_cfg *cfg) +{ + union afe_port_config *pcfg = &port->port_cfg; + + pcfg->slim_cfg.sb_cfg_minor_version = AFE_API_VERSION_SLIMBUS_CONFIG; + pcfg->slim_cfg.sample_rate = cfg->sample_rate; + pcfg->slim_cfg.bit_width = cfg->bit_width; + pcfg->slim_cfg.num_channels = cfg->num_channels; + pcfg->slim_cfg.data_format = cfg->data_format; + pcfg->slim_cfg.shared_ch_mapping[0] = cfg->ch_mapping[0]; + pcfg->slim_cfg.shared_ch_mapping[1] = cfg->ch_mapping[1]; + pcfg->slim_cfg.shared_ch_mapping[2] = cfg->ch_mapping[2]; + pcfg->slim_cfg.shared_ch_mapping[3] = cfg->ch_mapping[3]; + +} +EXPORT_SYMBOL_GPL(q6afe_slim_port_prepare); + /** * q6afe_hdmi_port_prepare() - Prepare hdmi afe port. * @@ -404,6 +524,15 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id) case AFE_PORT_ID_MULTICHAN_HDMI_RX: cfg_type = AFE_PARAM_ID_HDMI_CONFIG; break; + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_RX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_RX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_RX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_RX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_RX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX: + cfg_type = AFE_PARAM_ID_SLIMBUS_CONFIG; + break; default: dev_err(dev, "Invalid port id 0x%x\n", port_id); return ERR_PTR(-EINVAL); diff --git a/sound/soc/qcom/qdsp6/q6afe.h b/sound/soc/qcom/qdsp6/q6afe.h index 3bd991a7c42d..5659966c6b1e 100644 --- a/sound/soc/qcom/qdsp6/q6afe.h +++ b/sound/soc/qcom/qdsp6/q6afe.h @@ -11,6 +11,9 @@ #define MSM_AFE_PORT_TYPE_TX 1 #define AFE_MAX_PORTS AFE_PORT_MAX +#define AFE_MAX_CHAN_COUNT 8 +#define AFE_PORT_MAX_AUDIO_CHAN_CNT 0x8 + struct q6afe_hdmi_cfg { u16 datatype; u16 channel_allocation; @@ -18,8 +21,17 @@ struct q6afe_hdmi_cfg { u16 bit_width; }; +struct q6afe_slim_cfg { + u32 sample_rate; + u16 bit_width; + u16 data_format; + u16 num_channels; + u8 ch_mapping[AFE_MAX_CHAN_COUNT]; +}; + struct q6afe_port_config { struct q6afe_hdmi_cfg hdmi; + struct q6afe_slim_cfg slim; }; struct q6afe_port; @@ -31,5 +43,7 @@ void q6afe_port_put(struct q6afe_port *port); int q6afe_get_port_id(int index); void q6afe_hdmi_port_prepare(struct q6afe_port *port, struct q6afe_hdmi_cfg *cfg); +void q6afe_slim_port_prepare(struct q6afe_port *port, + struct q6afe_slim_cfg *cfg); #endif /* __Q6AFE_H__ */ -- 2.16.2
next prev parent reply other threads:[~2018-04-26 9:45 UTC|newest] Thread overview: 115+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-26 9:45 [PATCH v6 00/24] ASoC: qcom: Add support to QDSP based Audio srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla 2018-04-26 9:45 ` [PATCH v6 01/24] soc: qcom dt-bindings: Add APR bus bindings srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla 2018-04-27 14:07 ` Rob Herring 2018-04-27 14:07 ` Rob Herring 2018-04-27 14:07 ` Rob Herring 2018-05-11 3:19 ` Applied "soc: qcom dt-bindings: Add APR bus bindings" to the asoc tree Mark Brown 2018-05-11 3:19 ` Mark Brown 2018-05-11 3:19 ` Mark Brown 2018-04-26 9:45 ` [PATCH v6 02/24] soc: qcom: Add APR bus driver srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 11:39 ` Mark Brown 2018-04-26 11:39 ` Mark Brown 2018-04-26 11:39 ` Mark Brown 2018-04-26 12:05 ` Srinivas Kandagatla 2018-04-26 12:05 ` Srinivas Kandagatla 2018-04-26 12:05 ` Srinivas Kandagatla 2018-04-26 21:17 ` Andy Gross 2018-04-26 21:17 ` Andy Gross 2018-04-27 11:06 ` Mark Brown 2018-04-27 11:06 ` Mark Brown 2018-04-27 11:06 ` Mark Brown 2018-04-26 21:16 ` Andy Gross 2018-04-26 21:16 ` Andy Gross 2018-04-28 4:51 ` Bjorn Andersson 2018-04-28 4:51 ` Bjorn Andersson 2018-04-28 11:12 ` Srinivas Kandagatla 2018-04-28 11:12 ` Srinivas Kandagatla 2018-04-28 11:12 ` Srinivas Kandagatla 2018-04-26 9:45 ` [PATCH v6 03/24] ASoC: qdsp6: dt-bindings: Add q6core dt bindings srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-27 14:10 ` Rob Herring 2018-04-27 14:10 ` Rob Herring 2018-04-27 14:10 ` Rob Herring 2018-04-26 9:45 ` [PATCH v6 04/24] ASoC: qdsp6: dt-bindings: Add q6afe " srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla 2018-04-27 14:13 ` Rob Herring 2018-04-27 14:13 ` Rob Herring 2018-04-27 14:13 ` Rob Herring 2018-04-27 14:58 ` Srinivas Kandagatla 2018-04-27 14:58 ` Srinivas Kandagatla 2018-04-27 18:32 ` Rob Herring 2018-04-27 18:32 ` Rob Herring 2018-04-27 19:16 ` Srinivas Kandagatla 2018-04-27 19:16 ` Srinivas Kandagatla 2018-04-26 9:45 ` [PATCH v6 05/24] ASoC: qdsp6: dt-bindings: Add q6adm " srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla 2018-04-27 14:14 ` Rob Herring 2018-04-27 14:14 ` Rob Herring 2018-05-11 3:17 ` Applied "ASoC: qdsp6: dt-bindings: Add q6adm dt bindings" to the asoc tree Mark Brown 2018-05-11 3:17 ` Mark Brown 2018-05-11 3:17 ` Mark Brown 2018-04-26 9:45 ` [PATCH v6 06/24] ASoC: qdsp6: dt-bindings: Add q6asm dt bindings srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla 2018-04-27 14:17 ` Rob Herring 2018-04-27 14:17 ` Rob Herring 2018-04-27 14:17 ` Rob Herring 2018-05-11 3:16 ` Applied "ASoC: qdsp6: dt-bindings: Add q6asm dt bindings" to the asoc tree Mark Brown 2018-05-11 3:16 ` Mark Brown 2018-05-11 3:16 ` Mark Brown 2018-04-26 9:45 ` [PATCH v6 07/24] ASoC: qdsp6: q6common: Add qdsp6 helper functions srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla 2018-04-26 9:45 ` [PATCH v6 08/24] ASoC: qdsp6: q6core: Add q6core driver srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla 2018-04-26 9:45 ` [PATCH v6 09/24] ASoC: qdsp6: q6afe: Add q6afe driver srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla [this message] 2018-04-26 9:45 ` [PATCH v6 10/24] ASoC: qdsp6: qdafe: Add SLIMBus port Support srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` [PATCH v6 11/24] ASoC: qdsp6: q6afe: Add support to MI2S ports srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` [PATCH v6 12/24] ASoC: qdsp6: q6afe: Add support to MI2S sysclks srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla 2018-04-26 9:45 ` [PATCH v6 13/24] ASoC: qdsp6: q6adm: Add q6adm driver srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla 2018-04-26 9:45 ` [PATCH v6 14/24] ASoC: qdsp6: q6asm: Add q6asm driver srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla 2018-04-26 9:45 ` [PATCH v6 15/24] ASoC: qdsp6: q6asm: Add support to memory map and unmap srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla 2018-04-26 9:45 ` [PATCH v6 16/24] ASoC: qdsp6: q6asm: Add support to audio stream apis srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:45 ` srinivas.kandagatla 2018-04-26 9:45 ` [PATCH v6 17/24] ASoC: qdsp6: q6routing: Add q6routing driver srinivas.kandagatla 2018-04-26 9:45 ` srinivas.kandagatla at linaro.org 2018-04-26 9:46 ` [PATCH v6 18/24] ASoC: qdsp6: q6routing: Add support to all SLIMBus Mixers srinivas.kandagatla 2018-04-26 9:46 ` srinivas.kandagatla at linaro.org 2018-04-26 9:46 ` [PATCH v6 19/24] ASoC: qdsp6: q6routing: Add support to MI2S Mixers srinivas.kandagatla 2018-04-26 9:46 ` srinivas.kandagatla at linaro.org 2018-04-26 9:46 ` [PATCH v6 20/24] ASoC: qdsp6: q6afe: Add q6afe dai driver srinivas.kandagatla 2018-04-26 9:46 ` srinivas.kandagatla at linaro.org 2018-04-26 9:46 ` [PATCH v6 21/24] ASoC: qdsp6: q6asm: Add q6asm " srinivas.kandagatla 2018-04-26 9:46 ` srinivas.kandagatla at linaro.org 2018-04-26 9:46 ` [PATCH v6 22/24] ASoC: qdsp6: dt-bindings: Add apq8096 machine bindings srinivas.kandagatla 2018-04-26 9:46 ` srinivas.kandagatla at linaro.org 2018-04-27 14:18 ` Rob Herring 2018-04-27 14:18 ` Rob Herring 2018-04-27 14:18 ` Rob Herring 2018-05-21 15:47 ` Applied "ASoC: qdsp6: dt-bindings: Add apq8096 machine bindings" to the asoc tree Mark Brown 2018-05-21 15:47 ` Mark Brown 2018-05-21 15:47 ` Mark Brown 2018-04-26 9:46 ` [PATCH v6 23/24] ASoC: qcom: apq8096: Add db820c machine driver srinivas.kandagatla 2018-04-26 9:46 ` srinivas.kandagatla at linaro.org 2018-04-26 9:46 ` [PATCH v6 24/24] MAINTAINERS: Add myself as co-maintainer of qcom audio srinivas.kandagatla 2018-04-26 9:46 ` srinivas.kandagatla at linaro.org
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180426094606.4775-11-srinivas.kandagatla@linaro.org \ --to=srinivas.kandagatla@linaro.org \ --cc=alsa-devel@alsa-project.org \ --cc=andy.gross@linaro.org \ --cc=bgoswami@codeaurora.org \ --cc=broonie@kernel.org \ --cc=david.brown@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=perex@perex.cz \ --cc=plai@codeaurora.org \ --cc=robh+dt@kernel.org \ --cc=rohkumar@qti.qualcomm.com \ --cc=spatakok@qti.qualcomm.com \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.