From: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> To: linux-gpio@vger.kernel.org, Linus Walleij <linus.walleij@linaro.org>, Masahiro Yamada <yamada.masahiro@socionext.com>, linux-arm-kernel@lists.infradead.org Cc: Masami Hiramatsu <masami.hiramatsu@linaro.org>, Jassi Brar <jaswinder.singh@linaro.org>, linux-kernel@vger.kernel.org, Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Subject: [PATCH v2 1/2] pinctrl: uniphier: add LD20 MPEG2-TS I/O pin-mux settings Date: Fri, 27 Apr 2018 10:49:04 +0900 [thread overview] Message-ID: <20180427014905.19520-1-suzuki.katsuhiro@socionext.com> (raw) The MPEG2-TS input/output core both accepts serial TS and parallel TS. The serial TS interface uses following pins: hscin0_s : HS0DOUT[0-3] hscin1_s : HS0DOUT[4-7] hscin2_s : HS1BCLKIN, HS1SYNCIN, HS1VALIN, HS1DIN0 hscin3_s : HS1DIN[2-5] hscout0_s: HS0DOUT[0-3] hscout1_s: HS0DOUT[4-7] And the parallel TS interface uses following pins: hscin0_p : HS0BCLKIN, HS0SYNCIN, HS0VALIN, HS0DIN[0-7] hscin1_p : HS1BCLKIN, HS1SYNCIN, HS1VALIN, HS1DIN[0-7] hscout0_p: HS0BCLKOUT, HS0SYNCOUT, HS0VALOUT, HS0DOUT[0-7] Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> --- Changes in v2: - Fix indent - Sort alphabetically - Fix wrong grouping - Fix hsc'out'0_ci -> hsc'in'0_ci of hscin0 group - Fix hscin'0'_s -> hscin'1'_s of hscin1 group --- .../pinctrl/uniphier/pinctrl-uniphier-ld20.c | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c index bf8f0c3bea5e..9f449b35e300 100644 --- a/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c +++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c @@ -566,6 +566,33 @@ static const int ether_rgmii_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, static const unsigned ether_rmii_pins[] = {30, 31, 32, 33, 34, 35, 36, 37, 39, 41, 42, 45}; static const int ether_rmii_muxvals[] = {0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1}; +static const unsigned hscin0_ci_pins[] = {102, 103, 104, 105, 106, 107, 108, + 109, 110, 111, 112}; +static const int hscin0_ci_muxvals[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}; +static const unsigned hscin0_p_pins[] = {102, 103, 104, 105, 106, 107, 108, 109, + 110, 111, 112}; +static const int hscin0_p_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; +static const unsigned hscin0_s_pins[] = {116, 117, 118, 119}; +static const int hscin0_s_muxvals[] = {3, 3, 3, 3}; +static const unsigned hscin1_p_pins[] = {124, 125, 126, 127, 128, 129, 130, 131, + 132, 133, 134}; +static const int hscin1_p_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; +static const unsigned hscin1_s_pins[] = {120, 121, 122, 123}; +static const int hscin1_s_muxvals[] = {3, 3, 3, 3}; +static const unsigned hscin2_s_pins[] = {124, 125, 126, 127}; +static const int hscin2_s_muxvals[] = {3, 3, 3, 3}; +static const unsigned hscin3_s_pins[] = {129, 130, 131, 132}; +static const int hscin3_s_muxvals[] = {3, 3, 3, 3}; +static const unsigned hscout0_ci_pins[] = {113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123}; +static const int hscout0_ci_muxvals[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}; +static const unsigned hscout0_p_pins[] = {113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123}; +static const int hscout0_p_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; +static const unsigned hscout0_s_pins[] = {116, 117, 118, 119}; +static const int hscout0_s_muxvals[] = {4, 4, 4, 4}; +static const unsigned hscout1_s_pins[] = {120, 121, 122, 123}; +static const int hscout1_s_muxvals[] = {4, 4, 4, 4}; static const unsigned i2c0_pins[] = {63, 64}; static const int i2c0_muxvals[] = {0, 0}; static const unsigned i2c1_pins[] = {65, 66}; @@ -641,6 +668,17 @@ static const struct uniphier_pinctrl_group uniphier_ld20_groups[] = { UNIPHIER_PINCTRL_GROUP(emmc_dat8), UNIPHIER_PINCTRL_GROUP(ether_rgmii), UNIPHIER_PINCTRL_GROUP(ether_rmii), + UNIPHIER_PINCTRL_GROUP(hscin0_ci), + UNIPHIER_PINCTRL_GROUP(hscin0_p), + UNIPHIER_PINCTRL_GROUP(hscin0_s), + UNIPHIER_PINCTRL_GROUP(hscin1_p), + UNIPHIER_PINCTRL_GROUP(hscin1_s), + UNIPHIER_PINCTRL_GROUP(hscin2_s), + UNIPHIER_PINCTRL_GROUP(hscin3_s), + UNIPHIER_PINCTRL_GROUP(hscout0_ci), + UNIPHIER_PINCTRL_GROUP(hscout0_p), + UNIPHIER_PINCTRL_GROUP(hscout0_s), + UNIPHIER_PINCTRL_GROUP(hscout1_s), UNIPHIER_PINCTRL_GROUP(i2c0), UNIPHIER_PINCTRL_GROUP(i2c1), UNIPHIER_PINCTRL_GROUP(i2c3), @@ -668,6 +706,16 @@ static const char * const aoutiec1_groups[] = {"aoutiec1"}; static const char * const emmc_groups[] = {"emmc", "emmc_dat8"}; static const char * const ether_rgmii_groups[] = {"ether_rgmii"}; static const char * const ether_rmii_groups[] = {"ether_rmii"}; +static const char * const hscin0_groups[] = {"hscin0_ci", + "hscin0_p", + "hscin0_s"}; +static const char * const hscin1_groups[] = {"hscin1_p", "hscin1_s"}; +static const char * const hscin2_groups[] = {"hscin2_s"}; +static const char * const hscin3_groups[] = {"hscin3_s"}; +static const char * const hscout0_groups[] = {"hscout0_ci", + "hscout0_p", + "hscout0_s"}; +static const char * const hscout1_groups[] = {"hscout1_s"}; static const char * const i2c0_groups[] = {"i2c0"}; static const char * const i2c1_groups[] = {"i2c1"}; static const char * const i2c3_groups[] = {"i2c3"}; @@ -691,6 +739,12 @@ static const struct uniphier_pinmux_function uniphier_ld20_functions[] = { UNIPHIER_PINMUX_FUNCTION(emmc), UNIPHIER_PINMUX_FUNCTION(ether_rgmii), UNIPHIER_PINMUX_FUNCTION(ether_rmii), + UNIPHIER_PINMUX_FUNCTION(hscin0), + UNIPHIER_PINMUX_FUNCTION(hscin1), + UNIPHIER_PINMUX_FUNCTION(hscin2), + UNIPHIER_PINMUX_FUNCTION(hscin3), + UNIPHIER_PINMUX_FUNCTION(hscout0), + UNIPHIER_PINMUX_FUNCTION(hscout1), UNIPHIER_PINMUX_FUNCTION(i2c0), UNIPHIER_PINMUX_FUNCTION(i2c1), UNIPHIER_PINMUX_FUNCTION(i2c3), -- 2.17.0
WARNING: multiple messages have this Message-ID (diff)
From: suzuki.katsuhiro@socionext.com (Katsuhiro Suzuki) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 1/2] pinctrl: uniphier: add LD20 MPEG2-TS I/O pin-mux settings Date: Fri, 27 Apr 2018 10:49:04 +0900 [thread overview] Message-ID: <20180427014905.19520-1-suzuki.katsuhiro@socionext.com> (raw) The MPEG2-TS input/output core both accepts serial TS and parallel TS. The serial TS interface uses following pins: hscin0_s : HS0DOUT[0-3] hscin1_s : HS0DOUT[4-7] hscin2_s : HS1BCLKIN, HS1SYNCIN, HS1VALIN, HS1DIN0 hscin3_s : HS1DIN[2-5] hscout0_s: HS0DOUT[0-3] hscout1_s: HS0DOUT[4-7] And the parallel TS interface uses following pins: hscin0_p : HS0BCLKIN, HS0SYNCIN, HS0VALIN, HS0DIN[0-7] hscin1_p : HS1BCLKIN, HS1SYNCIN, HS1VALIN, HS1DIN[0-7] hscout0_p: HS0BCLKOUT, HS0SYNCOUT, HS0VALOUT, HS0DOUT[0-7] Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> --- Changes in v2: - Fix indent - Sort alphabetically - Fix wrong grouping - Fix hsc'out'0_ci -> hsc'in'0_ci of hscin0 group - Fix hscin'0'_s -> hscin'1'_s of hscin1 group --- .../pinctrl/uniphier/pinctrl-uniphier-ld20.c | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c index bf8f0c3bea5e..9f449b35e300 100644 --- a/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c +++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c @@ -566,6 +566,33 @@ static const int ether_rgmii_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, static const unsigned ether_rmii_pins[] = {30, 31, 32, 33, 34, 35, 36, 37, 39, 41, 42, 45}; static const int ether_rmii_muxvals[] = {0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1}; +static const unsigned hscin0_ci_pins[] = {102, 103, 104, 105, 106, 107, 108, + 109, 110, 111, 112}; +static const int hscin0_ci_muxvals[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}; +static const unsigned hscin0_p_pins[] = {102, 103, 104, 105, 106, 107, 108, 109, + 110, 111, 112}; +static const int hscin0_p_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; +static const unsigned hscin0_s_pins[] = {116, 117, 118, 119}; +static const int hscin0_s_muxvals[] = {3, 3, 3, 3}; +static const unsigned hscin1_p_pins[] = {124, 125, 126, 127, 128, 129, 130, 131, + 132, 133, 134}; +static const int hscin1_p_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; +static const unsigned hscin1_s_pins[] = {120, 121, 122, 123}; +static const int hscin1_s_muxvals[] = {3, 3, 3, 3}; +static const unsigned hscin2_s_pins[] = {124, 125, 126, 127}; +static const int hscin2_s_muxvals[] = {3, 3, 3, 3}; +static const unsigned hscin3_s_pins[] = {129, 130, 131, 132}; +static const int hscin3_s_muxvals[] = {3, 3, 3, 3}; +static const unsigned hscout0_ci_pins[] = {113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123}; +static const int hscout0_ci_muxvals[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}; +static const unsigned hscout0_p_pins[] = {113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123}; +static const int hscout0_p_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; +static const unsigned hscout0_s_pins[] = {116, 117, 118, 119}; +static const int hscout0_s_muxvals[] = {4, 4, 4, 4}; +static const unsigned hscout1_s_pins[] = {120, 121, 122, 123}; +static const int hscout1_s_muxvals[] = {4, 4, 4, 4}; static const unsigned i2c0_pins[] = {63, 64}; static const int i2c0_muxvals[] = {0, 0}; static const unsigned i2c1_pins[] = {65, 66}; @@ -641,6 +668,17 @@ static const struct uniphier_pinctrl_group uniphier_ld20_groups[] = { UNIPHIER_PINCTRL_GROUP(emmc_dat8), UNIPHIER_PINCTRL_GROUP(ether_rgmii), UNIPHIER_PINCTRL_GROUP(ether_rmii), + UNIPHIER_PINCTRL_GROUP(hscin0_ci), + UNIPHIER_PINCTRL_GROUP(hscin0_p), + UNIPHIER_PINCTRL_GROUP(hscin0_s), + UNIPHIER_PINCTRL_GROUP(hscin1_p), + UNIPHIER_PINCTRL_GROUP(hscin1_s), + UNIPHIER_PINCTRL_GROUP(hscin2_s), + UNIPHIER_PINCTRL_GROUP(hscin3_s), + UNIPHIER_PINCTRL_GROUP(hscout0_ci), + UNIPHIER_PINCTRL_GROUP(hscout0_p), + UNIPHIER_PINCTRL_GROUP(hscout0_s), + UNIPHIER_PINCTRL_GROUP(hscout1_s), UNIPHIER_PINCTRL_GROUP(i2c0), UNIPHIER_PINCTRL_GROUP(i2c1), UNIPHIER_PINCTRL_GROUP(i2c3), @@ -668,6 +706,16 @@ static const char * const aoutiec1_groups[] = {"aoutiec1"}; static const char * const emmc_groups[] = {"emmc", "emmc_dat8"}; static const char * const ether_rgmii_groups[] = {"ether_rgmii"}; static const char * const ether_rmii_groups[] = {"ether_rmii"}; +static const char * const hscin0_groups[] = {"hscin0_ci", + "hscin0_p", + "hscin0_s"}; +static const char * const hscin1_groups[] = {"hscin1_p", "hscin1_s"}; +static const char * const hscin2_groups[] = {"hscin2_s"}; +static const char * const hscin3_groups[] = {"hscin3_s"}; +static const char * const hscout0_groups[] = {"hscout0_ci", + "hscout0_p", + "hscout0_s"}; +static const char * const hscout1_groups[] = {"hscout1_s"}; static const char * const i2c0_groups[] = {"i2c0"}; static const char * const i2c1_groups[] = {"i2c1"}; static const char * const i2c3_groups[] = {"i2c3"}; @@ -691,6 +739,12 @@ static const struct uniphier_pinmux_function uniphier_ld20_functions[] = { UNIPHIER_PINMUX_FUNCTION(emmc), UNIPHIER_PINMUX_FUNCTION(ether_rgmii), UNIPHIER_PINMUX_FUNCTION(ether_rmii), + UNIPHIER_PINMUX_FUNCTION(hscin0), + UNIPHIER_PINMUX_FUNCTION(hscin1), + UNIPHIER_PINMUX_FUNCTION(hscin2), + UNIPHIER_PINMUX_FUNCTION(hscin3), + UNIPHIER_PINMUX_FUNCTION(hscout0), + UNIPHIER_PINMUX_FUNCTION(hscout1), UNIPHIER_PINMUX_FUNCTION(i2c0), UNIPHIER_PINMUX_FUNCTION(i2c1), UNIPHIER_PINMUX_FUNCTION(i2c3), -- 2.17.0
next reply other threads:[~2018-04-27 1:49 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-27 1:49 Katsuhiro Suzuki [this message] 2018-04-27 1:49 ` [PATCH v2 1/2] pinctrl: uniphier: add LD20 MPEG2-TS I/O pin-mux settings Katsuhiro Suzuki 2018-04-27 1:49 ` [PATCH v2 2/2] pinctrl: uniphier: add LD11 " Katsuhiro Suzuki 2018-04-27 1:49 ` Katsuhiro Suzuki 2018-04-27 3:11 ` Masahiro Yamada 2018-04-27 3:11 ` Masahiro Yamada 2018-05-02 12:18 ` Linus Walleij 2018-05-02 12:18 ` Linus Walleij 2018-04-27 3:11 ` [PATCH v2 1/2] pinctrl: uniphier: add LD20 " Masahiro Yamada 2018-04-27 3:11 ` Masahiro Yamada 2018-05-02 12:16 ` Linus Walleij 2018-05-02 12:16 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180427014905.19520-1-suzuki.katsuhiro@socionext.com \ --to=suzuki.katsuhiro@socionext.com \ --cc=jaswinder.singh@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=masami.hiramatsu@linaro.org \ --cc=yamada.masahiro@socionext.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.