[PATCH 0/3] remoteproc/davinci: common clock framework related fixes

[PATCH 0/3] remoteproc/davinci: common clock framework related fixes

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Hi Bjorn,

this series contains the patches from my previous remoteproc series[1]
which are safe to apply on top of 4.17-rc1. They contain fixes needed
for the driver to work once we're done converting to using the CCF for
DaVinci.

The last remoteproc patch will be sent later once the platform parts
are applied.

All the patches are reviewed and tested.

[1] https://lkml.org/lkml/2018/4/17/1000

Bartosz Golaszewski (3):
  remoteproc/davinci: add the missing retval check for clk_enable()
  remoteproc/davinci: prepare and unprepare the clock where needed
  remoteproc/davinci: use octal permissions for module_param()

 drivers/remoteproc/da8xx_remoteproc.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

-- 
2.17.0

[PATCH 1/3] remoteproc/davinci: add the missing retval check for clk_enable()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

The davinci platform is being switched to using the common clock
framework, where clk_enable() can fail. Add the return value check.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Suman Anna <s-anna@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
---
 drivers/remoteproc/da8xx_remoteproc.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index bf3b9034c319..2b24291337b7 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
 	struct device *dev = rproc->dev.parent;
 	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
 	struct clk *dsp_clk = drproc->dsp_clk;
+	int ret;
 
 	/* hw requires the start (boot) address be on 1KB boundary */
 	if (rproc->bootaddr & 0x3ff) {
@@ -148,7 +149,12 @@ static int da8xx_rproc_start(struct rproc *rproc)
 
 	writel(rproc->bootaddr, drproc->bootreg);
 
-	clk_enable(dsp_clk);
+	ret = clk_enable(dsp_clk);
+	if (ret) {
+		dev_err(dev, "clk_enable() failed: %d\n", ret);
+		return ret;
+	}
+
 	davinci_clk_reset_deassert(dsp_clk);
 
 	return 0;
-- 
2.17.0

[PATCH 2/3] remoteproc/davinci: prepare and unprepare the clock where needed

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We're currently switching the platform to using the common clock
framework. We need to explicitly prepare and unprepare the rproc
clock.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Suman Anna <s-anna@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
---
 drivers/remoteproc/da8xx_remoteproc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index 2b24291337b7..f134192922e0 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -149,9 +149,9 @@ static int da8xx_rproc_start(struct rproc *rproc)
 
 	writel(rproc->bootaddr, drproc->bootreg);
 
-	ret = clk_enable(dsp_clk);
+	ret = clk_prepare_enable(dsp_clk);
 	if (ret) {
-		dev_err(dev, "clk_enable() failed: %d\n", ret);
+		dev_err(dev, "clk_prepare_enable() failed: %d\n", ret);
 		return ret;
 	}
 
@@ -165,7 +165,7 @@ static int da8xx_rproc_stop(struct rproc *rproc)
 	struct da8xx_rproc *drproc = rproc->priv;
 
 	davinci_clk_reset_assert(drproc->dsp_clk);
-	clk_disable(drproc->dsp_clk);
+	clk_disable_unprepare(drproc->dsp_clk);
 
 	return 0;
 }
-- 
2.17.0

[PATCH 3/3] remoteproc/davinci: use octal permissions for module_param()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Checkpatch recommends to use octal perms instead of S_IRUGO.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
---
 drivers/remoteproc/da8xx_remoteproc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index f134192922e0..b668e32996e2 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -25,7 +25,7 @@
 #include "remoteproc_internal.h"
 
 static char *da8xx_fw_name;
-module_param(da8xx_fw_name, charp, S_IRUGO);
+module_param(da8xx_fw_name, charp, 0444);
 MODULE_PARM_DESC(da8xx_fw_name,
 		 "Name of DSP firmware file in /lib/firmware (if not specified defaults to 'rproc-dsp-fw')");
 
-- 
2.17.0

Re: [PATCH 1/3] remoteproc/davinci: add the missing retval check for clk_enable()

[Bjorn Andersson]

On Wed 02 May 02:56 PDT 2018, Bartosz Golaszewski wrote:

> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> The davinci platform is being switched to using the common clock
> framework, where clk_enable() can fail. Add the return value check.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> Acked-by: Suman Anna <s-anna@ti.com>
> Reviewed-by: David Lechner <david@lechnology.com>
> Reviewed-by: Sekhar Nori <nsekhar@ti.com>

Hi Bartosz,

All three patches applied to rproc-next.

Regards,
Bjorn

> ---
>  drivers/remoteproc/da8xx_remoteproc.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
> index bf3b9034c319..2b24291337b7 100644
> --- a/drivers/remoteproc/da8xx_remoteproc.c
> +++ b/drivers/remoteproc/da8xx_remoteproc.c
> @@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
>  	struct device *dev = rproc->dev.parent;
>  	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
>  	struct clk *dsp_clk = drproc->dsp_clk;
> +	int ret;
>  
>  	/* hw requires the start (boot) address be on 1KB boundary */
>  	if (rproc->bootaddr & 0x3ff) {
> @@ -148,7 +149,12 @@ static int da8xx_rproc_start(struct rproc *rproc)
>  
>  	writel(rproc->bootaddr, drproc->bootreg);
>  
> -	clk_enable(dsp_clk);
> +	ret = clk_enable(dsp_clk);
> +	if (ret) {
> +		dev_err(dev, "clk_enable() failed: %d\n", ret);
> +		return ret;
> +	}
> +
>  	davinci_clk_reset_deassert(dsp_clk);
>  
>  	return 0;
> -- 
> 2.17.0
>