From: Jiri Slaby <jslaby@suse.cz>
To: mingo@redhat.com
Cc: linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org,
Jiri Slaby <jslaby@suse.cz>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
x86@kernel.org, Boris Ostrovsky <boris.ostrovsky@oracle.com>,
Juergen Gross <jgross@suse.com>,
xen-devel@lists.xenproject.org
Subject: [PATCH -resend 22/27] x86_64: assembly, change all ENTRY+END to SYM_CODE_*
Date: Thu, 10 May 2018 10:06:39 +0200 [thread overview]
Message-ID: <20180510080644.19752-23-jslaby@suse.cz> (raw)
In-Reply-To: <20180510080644.19752-1-jslaby@suse.cz>
Here, we change all code which is not marked as functions. In other
words, this code has been using END, not ENDPROC. So switch all of this
to appropriate new markings SYM_CODE_START and SYM_CODE_END.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen bits]
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: xen-devel@lists.xenproject.org
---
arch/x86/entry/entry_64.S | 56 ++++++++++++++++++++--------------------
arch/x86/entry/entry_64_compat.S | 8 +++---
arch/x86/kernel/ftrace_64.S | 4 +--
arch/x86/xen/xen-asm_64.S | 8 +++---
arch/x86/xen/xen-head.S | 8 +++---
5 files changed, 42 insertions(+), 42 deletions(-)
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index c6841c038170..1b0631971dde 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -46,11 +46,11 @@
.section .entry.text, "ax"
#ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret64)
+SYM_CODE_START(native_usergs_sysret64)
UNWIND_HINT_EMPTY
swapgs
sysretq
-END(native_usergs_sysret64)
+SYM_CODE_END(native_usergs_sysret64)
#endif /* CONFIG_PARAVIRT */
.macro TRACE_IRQS_FLAGS flags:req
@@ -163,7 +163,7 @@ END(native_usergs_sysret64)
#define RSP_SCRATCH CPU_ENTRY_AREA_entry_stack + \
SIZEOF_entry_stack - 8 + CPU_ENTRY_AREA
-ENTRY(entry_SYSCALL_64_trampoline)
+SYM_CODE_START(entry_SYSCALL_64_trampoline)
UNWIND_HINT_EMPTY
swapgs
@@ -193,17 +193,17 @@ ENTRY(entry_SYSCALL_64_trampoline)
pushq %rdi
movq $entry_SYSCALL_64_stage2, %rdi
JMP_NOSPEC %rdi
-END(entry_SYSCALL_64_trampoline)
+SYM_CODE_END(entry_SYSCALL_64_trampoline)
.popsection
-ENTRY(entry_SYSCALL_64_stage2)
+SYM_CODE_START(entry_SYSCALL_64_stage2)
UNWIND_HINT_EMPTY
popq %rdi
jmp entry_SYSCALL_64_after_hwframe
-END(entry_SYSCALL_64_stage2)
+SYM_CODE_END(entry_SYSCALL_64_stage2)
-ENTRY(entry_SYSCALL_64)
+SYM_CODE_START(entry_SYSCALL_64)
UNWIND_HINT_EMPTY
/*
* Interrupts are off on entry.
@@ -336,13 +336,13 @@ syscall_return_via_sysret:
popq %rdi
popq %rsp
USERGS_SYSRET64
-END(entry_SYSCALL_64)
+SYM_CODE_END(entry_SYSCALL_64)
/*
* %rdi: prev task
* %rsi: next task
*/
-ENTRY(__switch_to_asm)
+SYM_CODE_START(__switch_to_asm)
UNWIND_HINT_FUNC
/*
* Save callee-saved registers
@@ -384,7 +384,7 @@ ENTRY(__switch_to_asm)
popq %rbp
jmp __switch_to
-END(__switch_to_asm)
+SYM_CODE_END(__switch_to_asm)
/*
* A newly forked process directly context switches into this address.
@@ -393,7 +393,7 @@ END(__switch_to_asm)
* rbx: kernel thread func (NULL for user thread)
* r12: kernel thread arg
*/
-ENTRY(ret_from_fork)
+SYM_CODE_START(ret_from_fork)
UNWIND_HINT_EMPTY
movq %rax, %rdi
call schedule_tail /* rdi: 'prev' task parameter */
@@ -419,14 +419,14 @@ ENTRY(ret_from_fork)
*/
movq $0, RAX(%rsp)
jmp 2b
-END(ret_from_fork)
+SYM_CODE_END(ret_from_fork)
/*
* Build the entry stubs with some assembler magic.
* We pack 1 stub into every 8-byte block.
*/
.align 8
-ENTRY(irq_entries_start)
+SYM_CODE_START(irq_entries_start)
vector=FIRST_EXTERNAL_VECTOR
.rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
UNWIND_HINT_IRET_REGS
@@ -435,7 +435,7 @@ ENTRY(irq_entries_start)
.align 8
vector=vector+1
.endr
-END(irq_entries_start)
+SYM_CODE_END(irq_entries_start)
.macro DEBUG_ENTRY_ASSERT_IRQS_OFF
#ifdef CONFIG_DEBUG_ENTRY
@@ -561,7 +561,7 @@ END(irq_entries_start)
* | return address |
* +----------------------------------------------------+
*/
-ENTRY(interrupt_entry)
+SYM_CODE_START(interrupt_entry)
UNWIND_HINT_FUNC
ASM_CLAC
cld
@@ -627,7 +627,7 @@ ENTRY(interrupt_entry)
TRACE_IRQS_OFF
ret
-END(interrupt_entry)
+SYM_CODE_END(interrupt_entry)
/* Interrupt entry/exit. */
@@ -832,7 +832,7 @@ SYM_CODE_END(common_interrupt)
* APIC interrupts.
*/
.macro apicinterrupt3 num sym do_sym
-ENTRY(\sym)
+SYM_CODE_START(\sym)
UNWIND_HINT_IRET_REGS
pushq $~(\num)
.Lcommon_\sym:
@@ -840,7 +840,7 @@ ENTRY(\sym)
UNWIND_HINT_REGS indirect=1
call \do_sym /* rdi points to pt_regs */
jmp ret_from_intr
-END(\sym)
+SYM_CODE_END(\sym)
.endm
/* Make sure APIC interrupt handlers end up in the irqentry section: */
@@ -902,7 +902,7 @@ apicinterrupt IRQ_WORK_VECTOR irq_work_interrupt smp_irq_work_interrupt
#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + ((x) - 1) * 8)
.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
-ENTRY(\sym)
+SYM_CODE_START(\sym)
UNWIND_HINT_IRET_REGS offset=\has_error_code*8
/* Sanity check */
@@ -985,7 +985,7 @@ ENTRY(\sym)
jmp error_exit /* %ebx: no swapgs flag */
.endif
-END(\sym)
+SYM_CODE_END(\sym)
.endm
idtentry divide_error do_divide_error has_error_code=0
@@ -1102,7 +1102,7 @@ SYM_CODE_END(xen_do_hypervisor_callback)
* We distinguish between categories by comparing each saved segment register
* with its current contents: any discrepancy means we in category 1.
*/
-ENTRY(xen_failsafe_callback)
+SYM_CODE_START(xen_failsafe_callback)
UNWIND_HINT_EMPTY
movl %ds, %ecx
cmpw %cx, 0x10(%rsp)
@@ -1132,7 +1132,7 @@ ENTRY(xen_failsafe_callback)
PUSH_AND_CLEAR_REGS
ENCODE_FRAME_POINTER
jmp error_exit
-END(xen_failsafe_callback)
+SYM_CODE_END(xen_failsafe_callback)
apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
xen_hvm_callback_vector xen_evtchn_do_upcall
@@ -1340,7 +1340,7 @@ SYM_CODE_END(error_exit)
* %r14: Used to save/restore the CR3 of the interrupted context
* when PAGE_TABLE_ISOLATION is in use. Do not clobber.
*/
-ENTRY(nmi)
+SYM_CODE_START(nmi)
UNWIND_HINT_IRET_REGS
/*
@@ -1673,15 +1673,15 @@ nmi_restore:
* about espfix64 on the way back to kernel mode.
*/
iretq
-END(nmi)
+SYM_CODE_END(nmi)
-ENTRY(ignore_sysret)
+SYM_CODE_START(ignore_sysret)
UNWIND_HINT_EMPTY
mov $-ENOSYS, %eax
sysret
-END(ignore_sysret)
+SYM_CODE_END(ignore_sysret)
-ENTRY(rewind_stack_do_exit)
+SYM_CODE_START(rewind_stack_do_exit)
UNWIND_HINT_FUNC
/* Prevent any naive code from trying to unwind to our caller. */
xorl %ebp, %ebp
@@ -1691,4 +1691,4 @@ ENTRY(rewind_stack_do_exit)
UNWIND_HINT_FUNC sp_offset=PTREGS_SIZE
call do_exit
-END(rewind_stack_do_exit)
+SYM_CODE_END(rewind_stack_do_exit)
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index 076659472d40..b4a2ee901899 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -196,7 +196,7 @@ ENDPROC(entry_SYSENTER_compat)
* esp user stack
* 0(%esp) arg6
*/
-ENTRY(entry_SYSCALL_compat)
+SYM_CODE_START(entry_SYSCALL_compat)
/* Interrupts are off on entry. */
swapgs
@@ -311,7 +311,7 @@ sysret32_from_system_call:
xorl %r10d, %r10d
swapgs
sysretl
-END(entry_SYSCALL_compat)
+SYM_CODE_END(entry_SYSCALL_compat)
/*
* 32-bit legacy system call entry.
@@ -339,7 +339,7 @@ END(entry_SYSCALL_compat)
* edi arg5
* ebp arg6
*/
-ENTRY(entry_INT80_compat)
+SYM_CODE_START(entry_INT80_compat)
/*
* Interrupts are off on entry.
*/
@@ -414,4 +414,4 @@ ENTRY(entry_INT80_compat)
/* Go back to user mode. */
TRACE_IRQS_ON
jmp swapgs_restore_regs_and_return_to_usermode
-END(entry_INT80_compat)
+SYM_CODE_END(entry_INT80_compat)
diff --git a/arch/x86/kernel/ftrace_64.S b/arch/x86/kernel/ftrace_64.S
index b50fbb405763..141341eaa267 100644
--- a/arch/x86/kernel/ftrace_64.S
+++ b/arch/x86/kernel/ftrace_64.S
@@ -319,7 +319,7 @@ ENTRY(ftrace_graph_caller)
retq
ENDPROC(ftrace_graph_caller)
-ENTRY(return_to_handler)
+SYM_CODE_START(return_to_handler)
UNWIND_HINT_EMPTY
subq $24, %rsp
@@ -335,5 +335,5 @@ ENTRY(return_to_handler)
movq (%rsp), %rax
addq $24, %rsp
JMP_NOSPEC %rdi
-END(return_to_handler)
+SYM_CODE_END(return_to_handler)
#endif
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index a69a171f7cea..5a3f5c18cd0c 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -19,11 +19,11 @@
#include <linux/linkage.h>
.macro xen_pv_trap name
-ENTRY(xen_\name)
+SYM_CODE_START(xen_\name)
pop %rcx
pop %r11
jmp \name
-END(xen_\name)
+SYM_CODE_END(xen_\name)
.endm
xen_pv_trap divide_error
@@ -56,7 +56,7 @@ xen_pv_trap entry_INT80_compat
xen_pv_trap hypervisor_callback
__INIT
-ENTRY(xen_early_idt_handler_array)
+SYM_CODE_START(xen_early_idt_handler_array)
i = 0
.rept NUM_EXCEPTION_VECTORS
pop %rcx
@@ -65,7 +65,7 @@ ENTRY(xen_early_idt_handler_array)
i = i + 1
.fill xen_early_idt_handler_array + i*XEN_EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
-END(xen_early_idt_handler_array)
+SYM_CODE_END(xen_early_idt_handler_array)
__FINIT
hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 5077ead5e59c..32606eeec053 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -22,7 +22,7 @@
#ifdef CONFIG_XEN_PV
__INIT
-ENTRY(startup_xen)
+SYM_CODE_START(startup_xen)
UNWIND_HINT_EMPTY
cld
@@ -52,13 +52,13 @@ ENTRY(startup_xen)
#endif
jmp xen_start_kernel
-END(startup_xen)
+SYM_CODE_END(startup_xen)
__FINIT
#endif
.pushsection .text
.balign PAGE_SIZE
-ENTRY(hypercall_page)
+SYM_CODE_START(hypercall_page)
.rept (PAGE_SIZE / 32)
UNWIND_HINT_EMPTY
.skip 32
@@ -69,7 +69,7 @@ ENTRY(hypercall_page)
.type xen_hypercall_##n, @function; .size xen_hypercall_##n, 32
#include <asm/xen-hypercalls.h>
#undef HYPERCALL
-END(hypercall_page)
+SYM_CODE_END(hypercall_page)
.popsection
ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS, .asciz "linux")
--
2.16.3
WARNING: multiple messages have this Message-ID (diff)
From: Jiri Slaby <jslaby@suse.cz>
To: mingo@redhat.com
Cc: linux-arch@vger.kernel.org, Juergen Gross <jgross@suse.com>,
x86@kernel.org, linux-kernel@vger.kernel.org,
"H. Peter Anvin" <hpa@zytor.com>,
xen-devel@lists.xenproject.org,
Thomas Gleixner <tglx@linutronix.de>, Jiri Slaby <jslaby@suse.cz>,
Boris Ostrovsky <boris.ostrovsky@oracle.com>
Subject: [PATCH -resend 22/27] x86_64: assembly, change all ENTRY+END to SYM_CODE_*
Date: Thu, 10 May 2018 10:06:39 +0200 [thread overview]
Message-ID: <20180510080644.19752-23-jslaby@suse.cz> (raw)
In-Reply-To: <20180510080644.19752-1-jslaby@suse.cz>
Here, we change all code which is not marked as functions. In other
words, this code has been using END, not ENDPROC. So switch all of this
to appropriate new markings SYM_CODE_START and SYM_CODE_END.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen bits]
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: xen-devel@lists.xenproject.org
---
arch/x86/entry/entry_64.S | 56 ++++++++++++++++++++--------------------
arch/x86/entry/entry_64_compat.S | 8 +++---
arch/x86/kernel/ftrace_64.S | 4 +--
arch/x86/xen/xen-asm_64.S | 8 +++---
arch/x86/xen/xen-head.S | 8 +++---
5 files changed, 42 insertions(+), 42 deletions(-)
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index c6841c038170..1b0631971dde 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -46,11 +46,11 @@
.section .entry.text, "ax"
#ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret64)
+SYM_CODE_START(native_usergs_sysret64)
UNWIND_HINT_EMPTY
swapgs
sysretq
-END(native_usergs_sysret64)
+SYM_CODE_END(native_usergs_sysret64)
#endif /* CONFIG_PARAVIRT */
.macro TRACE_IRQS_FLAGS flags:req
@@ -163,7 +163,7 @@ END(native_usergs_sysret64)
#define RSP_SCRATCH CPU_ENTRY_AREA_entry_stack + \
SIZEOF_entry_stack - 8 + CPU_ENTRY_AREA
-ENTRY(entry_SYSCALL_64_trampoline)
+SYM_CODE_START(entry_SYSCALL_64_trampoline)
UNWIND_HINT_EMPTY
swapgs
@@ -193,17 +193,17 @@ ENTRY(entry_SYSCALL_64_trampoline)
pushq %rdi
movq $entry_SYSCALL_64_stage2, %rdi
JMP_NOSPEC %rdi
-END(entry_SYSCALL_64_trampoline)
+SYM_CODE_END(entry_SYSCALL_64_trampoline)
.popsection
-ENTRY(entry_SYSCALL_64_stage2)
+SYM_CODE_START(entry_SYSCALL_64_stage2)
UNWIND_HINT_EMPTY
popq %rdi
jmp entry_SYSCALL_64_after_hwframe
-END(entry_SYSCALL_64_stage2)
+SYM_CODE_END(entry_SYSCALL_64_stage2)
-ENTRY(entry_SYSCALL_64)
+SYM_CODE_START(entry_SYSCALL_64)
UNWIND_HINT_EMPTY
/*
* Interrupts are off on entry.
@@ -336,13 +336,13 @@ syscall_return_via_sysret:
popq %rdi
popq %rsp
USERGS_SYSRET64
-END(entry_SYSCALL_64)
+SYM_CODE_END(entry_SYSCALL_64)
/*
* %rdi: prev task
* %rsi: next task
*/
-ENTRY(__switch_to_asm)
+SYM_CODE_START(__switch_to_asm)
UNWIND_HINT_FUNC
/*
* Save callee-saved registers
@@ -384,7 +384,7 @@ ENTRY(__switch_to_asm)
popq %rbp
jmp __switch_to
-END(__switch_to_asm)
+SYM_CODE_END(__switch_to_asm)
/*
* A newly forked process directly context switches into this address.
@@ -393,7 +393,7 @@ END(__switch_to_asm)
* rbx: kernel thread func (NULL for user thread)
* r12: kernel thread arg
*/
-ENTRY(ret_from_fork)
+SYM_CODE_START(ret_from_fork)
UNWIND_HINT_EMPTY
movq %rax, %rdi
call schedule_tail /* rdi: 'prev' task parameter */
@@ -419,14 +419,14 @@ ENTRY(ret_from_fork)
*/
movq $0, RAX(%rsp)
jmp 2b
-END(ret_from_fork)
+SYM_CODE_END(ret_from_fork)
/*
* Build the entry stubs with some assembler magic.
* We pack 1 stub into every 8-byte block.
*/
.align 8
-ENTRY(irq_entries_start)
+SYM_CODE_START(irq_entries_start)
vector=FIRST_EXTERNAL_VECTOR
.rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
UNWIND_HINT_IRET_REGS
@@ -435,7 +435,7 @@ ENTRY(irq_entries_start)
.align 8
vector=vector+1
.endr
-END(irq_entries_start)
+SYM_CODE_END(irq_entries_start)
.macro DEBUG_ENTRY_ASSERT_IRQS_OFF
#ifdef CONFIG_DEBUG_ENTRY
@@ -561,7 +561,7 @@ END(irq_entries_start)
* | return address |
* +----------------------------------------------------+
*/
-ENTRY(interrupt_entry)
+SYM_CODE_START(interrupt_entry)
UNWIND_HINT_FUNC
ASM_CLAC
cld
@@ -627,7 +627,7 @@ ENTRY(interrupt_entry)
TRACE_IRQS_OFF
ret
-END(interrupt_entry)
+SYM_CODE_END(interrupt_entry)
/* Interrupt entry/exit. */
@@ -832,7 +832,7 @@ SYM_CODE_END(common_interrupt)
* APIC interrupts.
*/
.macro apicinterrupt3 num sym do_sym
-ENTRY(\sym)
+SYM_CODE_START(\sym)
UNWIND_HINT_IRET_REGS
pushq $~(\num)
.Lcommon_\sym:
@@ -840,7 +840,7 @@ ENTRY(\sym)
UNWIND_HINT_REGS indirect=1
call \do_sym /* rdi points to pt_regs */
jmp ret_from_intr
-END(\sym)
+SYM_CODE_END(\sym)
.endm
/* Make sure APIC interrupt handlers end up in the irqentry section: */
@@ -902,7 +902,7 @@ apicinterrupt IRQ_WORK_VECTOR irq_work_interrupt smp_irq_work_interrupt
#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + ((x) - 1) * 8)
.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
-ENTRY(\sym)
+SYM_CODE_START(\sym)
UNWIND_HINT_IRET_REGS offset=\has_error_code*8
/* Sanity check */
@@ -985,7 +985,7 @@ ENTRY(\sym)
jmp error_exit /* %ebx: no swapgs flag */
.endif
-END(\sym)
+SYM_CODE_END(\sym)
.endm
idtentry divide_error do_divide_error has_error_code=0
@@ -1102,7 +1102,7 @@ SYM_CODE_END(xen_do_hypervisor_callback)
* We distinguish between categories by comparing each saved segment register
* with its current contents: any discrepancy means we in category 1.
*/
-ENTRY(xen_failsafe_callback)
+SYM_CODE_START(xen_failsafe_callback)
UNWIND_HINT_EMPTY
movl %ds, %ecx
cmpw %cx, 0x10(%rsp)
@@ -1132,7 +1132,7 @@ ENTRY(xen_failsafe_callback)
PUSH_AND_CLEAR_REGS
ENCODE_FRAME_POINTER
jmp error_exit
-END(xen_failsafe_callback)
+SYM_CODE_END(xen_failsafe_callback)
apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
xen_hvm_callback_vector xen_evtchn_do_upcall
@@ -1340,7 +1340,7 @@ SYM_CODE_END(error_exit)
* %r14: Used to save/restore the CR3 of the interrupted context
* when PAGE_TABLE_ISOLATION is in use. Do not clobber.
*/
-ENTRY(nmi)
+SYM_CODE_START(nmi)
UNWIND_HINT_IRET_REGS
/*
@@ -1673,15 +1673,15 @@ nmi_restore:
* about espfix64 on the way back to kernel mode.
*/
iretq
-END(nmi)
+SYM_CODE_END(nmi)
-ENTRY(ignore_sysret)
+SYM_CODE_START(ignore_sysret)
UNWIND_HINT_EMPTY
mov $-ENOSYS, %eax
sysret
-END(ignore_sysret)
+SYM_CODE_END(ignore_sysret)
-ENTRY(rewind_stack_do_exit)
+SYM_CODE_START(rewind_stack_do_exit)
UNWIND_HINT_FUNC
/* Prevent any naive code from trying to unwind to our caller. */
xorl %ebp, %ebp
@@ -1691,4 +1691,4 @@ ENTRY(rewind_stack_do_exit)
UNWIND_HINT_FUNC sp_offset=PTREGS_SIZE
call do_exit
-END(rewind_stack_do_exit)
+SYM_CODE_END(rewind_stack_do_exit)
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index 076659472d40..b4a2ee901899 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -196,7 +196,7 @@ ENDPROC(entry_SYSENTER_compat)
* esp user stack
* 0(%esp) arg6
*/
-ENTRY(entry_SYSCALL_compat)
+SYM_CODE_START(entry_SYSCALL_compat)
/* Interrupts are off on entry. */
swapgs
@@ -311,7 +311,7 @@ sysret32_from_system_call:
xorl %r10d, %r10d
swapgs
sysretl
-END(entry_SYSCALL_compat)
+SYM_CODE_END(entry_SYSCALL_compat)
/*
* 32-bit legacy system call entry.
@@ -339,7 +339,7 @@ END(entry_SYSCALL_compat)
* edi arg5
* ebp arg6
*/
-ENTRY(entry_INT80_compat)
+SYM_CODE_START(entry_INT80_compat)
/*
* Interrupts are off on entry.
*/
@@ -414,4 +414,4 @@ ENTRY(entry_INT80_compat)
/* Go back to user mode. */
TRACE_IRQS_ON
jmp swapgs_restore_regs_and_return_to_usermode
-END(entry_INT80_compat)
+SYM_CODE_END(entry_INT80_compat)
diff --git a/arch/x86/kernel/ftrace_64.S b/arch/x86/kernel/ftrace_64.S
index b50fbb405763..141341eaa267 100644
--- a/arch/x86/kernel/ftrace_64.S
+++ b/arch/x86/kernel/ftrace_64.S
@@ -319,7 +319,7 @@ ENTRY(ftrace_graph_caller)
retq
ENDPROC(ftrace_graph_caller)
-ENTRY(return_to_handler)
+SYM_CODE_START(return_to_handler)
UNWIND_HINT_EMPTY
subq $24, %rsp
@@ -335,5 +335,5 @@ ENTRY(return_to_handler)
movq (%rsp), %rax
addq $24, %rsp
JMP_NOSPEC %rdi
-END(return_to_handler)
+SYM_CODE_END(return_to_handler)
#endif
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index a69a171f7cea..5a3f5c18cd0c 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -19,11 +19,11 @@
#include <linux/linkage.h>
.macro xen_pv_trap name
-ENTRY(xen_\name)
+SYM_CODE_START(xen_\name)
pop %rcx
pop %r11
jmp \name
-END(xen_\name)
+SYM_CODE_END(xen_\name)
.endm
xen_pv_trap divide_error
@@ -56,7 +56,7 @@ xen_pv_trap entry_INT80_compat
xen_pv_trap hypervisor_callback
__INIT
-ENTRY(xen_early_idt_handler_array)
+SYM_CODE_START(xen_early_idt_handler_array)
i = 0
.rept NUM_EXCEPTION_VECTORS
pop %rcx
@@ -65,7 +65,7 @@ ENTRY(xen_early_idt_handler_array)
i = i + 1
.fill xen_early_idt_handler_array + i*XEN_EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
-END(xen_early_idt_handler_array)
+SYM_CODE_END(xen_early_idt_handler_array)
__FINIT
hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 5077ead5e59c..32606eeec053 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -22,7 +22,7 @@
#ifdef CONFIG_XEN_PV
__INIT
-ENTRY(startup_xen)
+SYM_CODE_START(startup_xen)
UNWIND_HINT_EMPTY
cld
@@ -52,13 +52,13 @@ ENTRY(startup_xen)
#endif
jmp xen_start_kernel
-END(startup_xen)
+SYM_CODE_END(startup_xen)
__FINIT
#endif
.pushsection .text
.balign PAGE_SIZE
-ENTRY(hypercall_page)
+SYM_CODE_START(hypercall_page)
.rept (PAGE_SIZE / 32)
UNWIND_HINT_EMPTY
.skip 32
@@ -69,7 +69,7 @@ ENTRY(hypercall_page)
.type xen_hypercall_##n, @function; .size xen_hypercall_##n, 32
#include <asm/xen-hypercalls.h>
#undef HYPERCALL
-END(hypercall_page)
+SYM_CODE_END(hypercall_page)
.popsection
ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS, .asciz "linux")
--
2.16.3
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2018-05-10 8:09 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-10 8:06 [PATCH -resend 00/27] New macros for assembler symbols Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 01/27] linkage: new " Jiri Slaby
2018-05-10 8:06 ` Jiri Slaby
2018-05-14 3:04 ` Randy Dunlap
2018-05-14 3:04 ` Randy Dunlap
2018-05-14 12:54 ` Jiri Slaby
2018-05-14 12:54 ` Jiri Slaby
2018-05-14 8:03 ` Ingo Molnar
2018-05-14 8:03 ` Ingo Molnar
2018-05-10 8:06 ` [PATCH -resend 02/27] x86: assembly, use SYM_DATA for data Jiri Slaby
2018-05-14 8:05 ` Ingo Molnar
2018-05-15 6:39 ` Ingo Molnar
2018-05-18 9:17 ` Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 03/27] x86: assembly, annotate relocate_kernel Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 04/27] x86: entry, annotate THUNKs Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 05/27] x86: assembly, annotate local pseudo-functions Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 06/27] x86: crypto, annotate local functions Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 07/27] x86: boot, " Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 08/27] x86: assembly, annotate aliases Jiri Slaby
2018-05-10 8:06 ` Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 09/27] x86: entry, annotate interrupt symbols properly Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 10/27] x86: head, annotate data appropriatelly Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 11/27] x86: boot, " Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 12/27] x86: um, " Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 13/27] x86: xen-pvh, " Jiri Slaby
2018-05-10 8:06 ` Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 14/27] x86: purgatory, start using annotations Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 15/27] x86: assembly, do not annotate functions by GLOBAL Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 16/27] x86: assembly, use SYM_CODE_INNER_LABEL instead of GLOBAL Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 17/27] x86: realmode, use SYM_DATA_* " Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 18/27] x86: assembly, remove GLOBAL macro Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 19/27] x86: assembly, make some functions local Jiri Slaby
2018-05-10 8:06 ` Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 20/27] x86: ftrace, mark function_hook as function Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 21/27] x86_64: assembly, add ENDs to some functions and relabel with SYM_CODE_* Jiri Slaby
2018-05-10 8:06 ` Jiri Slaby
2018-05-10 8:06 ` Jiri Slaby [this message]
2018-05-10 8:06 ` [PATCH -resend 22/27] x86_64: assembly, change all ENTRY+END to SYM_CODE_* Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 23/27] x86_64: assembly, change all ENTRY+ENDPROC to SYM_FUNC_* Jiri Slaby
2018-05-10 8:06 ` Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 24/27] x86_32: assembly, add ENDs to some functions and relabel with SYM_CODE_* Jiri Slaby
2018-05-10 8:06 ` Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 25/27] x86_32: assembly, change all ENTRY+END to SYM_CODE_* Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 26/27] x86_32: assembly, change all ENTRY+ENDPROC to SYM_FUNC_* Jiri Slaby
2018-05-10 8:06 ` [PATCH -resend 27/27] x86: assembly, replace WEAK uses Jiri Slaby
2018-05-14 8:10 ` [PATCH -resend 00/27] New macros for assembler symbols Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180510080644.19752-23-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=boris.ostrovsky@oracle.com \
--cc=hpa@zytor.com \
--cc=jgross@suse.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.