All of lore.kernel.org
 help / color / mirror / Atom feed
From: Li Wei <liwei213@huawei.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<catalin.marinas@arm.com>, <will.deacon@arm.com>,
	<vinholikatti@gmail.com>, <jejb@linux.vnet.ibm.com>,
	<martin.petersen@oracle.com>, <khilman@baylibre.com>,
	<arnd@arndb.de>, <gregory.clement@free-electrons.com>,
	<thomas.petazzoni@free-electrons.com>,
	<yamada.masahiro@socionext.com>, <riku.voipio@linaro.org>,
	<treding@nvidia.com>, <krzk@kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-scsi@vger.kernel.org>
Cc: <zangleigang@hisilicon.com>, <gengjianfeng@hisilicon.com>,
	<guodong.xu@linaro.org>, <puck.chen@hisilicon.com>,
	<john.stultz@linaro.org>, <liwei213@huawei.com>,
	<fengbaopeng@hisilicon.com>
Subject: [PATCH v10 3/5] arm64: dts: add ufs dts node
Date: Fri, 25 May 2018 17:17:10 +0800	[thread overview]
Message-ID: <20180525091712.37227-4-liwei213@huawei.com> (raw)
In-Reply-To: <20180525091712.37227-1-liwei213@huawei.com>

arm64: dts: add ufs node for Hisilicon.

Signed-off-by: Li Wei <liwei213@huawei.com>
---
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index ec3eb8e33a3a..04438621c6c3 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -892,6 +892,24 @@
 			reset-gpios = <&gpio11 1 0 >;
 		};
 
+		/* UFS */
+		ufs: ufs@ff3b0000 {
+			compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3b0000 0x0 0x1000>,
+				<0x0 0xff3b1000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+				<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+			clock-names = "ref_clk", "phy_clk";
+			freq-table-hz = <0 0>, <0 0>;
+			/* offset: 0x84; bit: 12 */
+			resets = <&crg_rst 0x84 12>;
+			reset-names = "rst";
+		};
+
 		/* SD */
 		dwmmc1: dwmmc1@ff37f000 {
 			#address-cells = <1>;
-- 
2.15.0

WARNING: multiple messages have this Message-ID (diff)
From: Li Wei <liwei213@huawei.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
	catalin.marinas@arm.com, will.deacon@arm.com,
	vinholikatti@gmail.com, jejb@linux.vnet.ibm.com,
	martin.petersen@oracle.com, khilman@baylibre.com, arnd@arndb.de,
	gregory.clement@free-electrons.com,
	thomas.petazzoni@free-electrons.com,
	yamada.masahiro@socionext.com, riku.voipio@linaro.org,
	treding@nvidia.com, krzk@kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-scsi@vger.kernel.org
Cc: zangleigang@hisilicon.com, gengjianfeng@hisilicon.com,
	guodong.xu@linaro.org, puck.chen@hisilicon.com,
	john.stultz@linaro.org, liwei213@huawei.com,
	fengbaopeng@hisilicon.com
Subject: [PATCH v10 3/5] arm64: dts: add ufs dts node
Date: Fri, 25 May 2018 17:17:10 +0800	[thread overview]
Message-ID: <20180525091712.37227-4-liwei213@huawei.com> (raw)
In-Reply-To: <20180525091712.37227-1-liwei213@huawei.com>

arm64: dts: add ufs node for Hisilicon.

Signed-off-by: Li Wei <liwei213@huawei.com>
---
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index ec3eb8e33a3a..04438621c6c3 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -892,6 +892,24 @@
 			reset-gpios = <&gpio11 1 0 >;
 		};
 
+		/* UFS */
+		ufs: ufs@ff3b0000 {
+			compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3b0000 0x0 0x1000>,
+				<0x0 0xff3b1000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+				<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+			clock-names = "ref_clk", "phy_clk";
+			freq-table-hz = <0 0>, <0 0>;
+			/* offset: 0x84; bit: 12 */
+			resets = <&crg_rst 0x84 12>;
+			reset-names = "rst";
+		};
+
 		/* SD */
 		dwmmc1: dwmmc1@ff37f000 {
 			#address-cells = <1>;
-- 
2.15.0

WARNING: multiple messages have this Message-ID (diff)
From: liwei213@huawei.com (Li Wei)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 3/5] arm64: dts: add ufs dts node
Date: Fri, 25 May 2018 17:17:10 +0800	[thread overview]
Message-ID: <20180525091712.37227-4-liwei213@huawei.com> (raw)
In-Reply-To: <20180525091712.37227-1-liwei213@huawei.com>

arm64: dts: add ufs node for Hisilicon.

Signed-off-by: Li Wei <liwei213@huawei.com>
---
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index ec3eb8e33a3a..04438621c6c3 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -892,6 +892,24 @@
 			reset-gpios = <&gpio11 1 0 >;
 		};
 
+		/* UFS */
+		ufs: ufs at ff3b0000 {
+			compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3b0000 0x0 0x1000>,
+				<0x0 0xff3b1000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+				<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+			clock-names = "ref_clk", "phy_clk";
+			freq-table-hz = <0 0>, <0 0>;
+			/* offset: 0x84; bit: 12 */
+			resets = <&crg_rst 0x84 12>;
+			reset-names = "rst";
+		};
+
 		/* SD */
 		dwmmc1: dwmmc1 at ff37f000 {
 			#address-cells = <1>;
-- 
2.15.0

  parent reply	other threads:[~2018-05-25  9:17 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-25  9:17 [PATCH v10 0/5] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC Li Wei
2018-05-25  9:17 ` Li Wei
2018-05-25  9:17 ` Li Wei
2018-05-25  9:17 ` [PATCH v10 1/5] scsi: ufs: add Hisilicon ufs driver code Li Wei
2018-05-25  9:17   ` Li Wei
2018-05-25  9:17   ` Li Wei
2018-05-25  9:17 ` [PATCH v10 2/5] dt-bindings: scsi: ufs: add document for hisi-ufs Li Wei
2018-05-25  9:17   ` Li Wei
2018-05-25  9:17   ` Li Wei
2018-05-31  0:10   ` Rob Herring
2018-05-31  0:10     ` Rob Herring
2018-05-25  9:17 ` Li Wei [this message]
2018-05-25  9:17   ` [PATCH v10 3/5] arm64: dts: add ufs dts node Li Wei
2018-05-25  9:17   ` Li Wei
2018-05-25  9:17 ` [PATCH v10 4/5] arm64: defconfig: enable configs for Hisilicon ufs Li Wei
2018-05-25  9:17   ` Li Wei
2018-05-25  9:17   ` Li Wei
2018-05-25  9:17 ` [PATCH v10 5/5] arm64: defconfig: enable f2fs and squashfs Li Wei
2018-05-25  9:17   ` Li Wei
2018-05-25  9:17   ` Li Wei
2018-06-03  7:12 ` 答复: [PATCH v10 0/5] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC liwei (CM)
2018-06-03  7:12   ` liwei (CM)
2018-06-05 14:59 ` Valentin Schneider
2018-06-05 14:59   ` Valentin Schneider
2018-06-06  0:48   ` 答复: " liwei (CM)
2018-06-06  0:48     ` liwei (CM)
2018-06-06  0:48     ` liwei (CM)
2018-06-06  0:48   ` liwei (CM)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180525091712.37227-4-liwei213@huawei.com \
    --to=liwei213@huawei.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fengbaopeng@hisilicon.com \
    --cc=gengjianfeng@hisilicon.com \
    --cc=gregory.clement@free-electrons.com \
    --cc=guodong.xu@linaro.org \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=john.stultz@linaro.org \
    --cc=khilman@baylibre.com \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=martin.petersen@oracle.com \
    --cc=puck.chen@hisilicon.com \
    --cc=riku.voipio@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@free-electrons.com \
    --cc=treding@nvidia.com \
    --cc=vinholikatti@gmail.com \
    --cc=will.deacon@arm.com \
    --cc=yamada.masahiro@socionext.com \
    --cc=zangleigang@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.