From: Thierry Reding <thierry.reding@gmail.com> To: Mauro Carvalho Chehab <mchehab@kernel.org>, Thierry Reding <thierry.reding@gmail.com> Cc: devel@driverdev.osuosl.org, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Jonathan Hunter <jonathanh@nvidia.com>, linux-tegra@vger.kernel.org, Dmitry Osipenko <digetx@gmail.com>, linux-media@vger.kernel.org Subject: [PATCH 00/14] staging: media: tegra-vdea: Add Tegra124 support Date: Mon, 13 Aug 2018 16:50:13 +0200 [thread overview] Message-ID: <20180813145027.16346-1-thierry.reding@gmail.com> (raw) From: Thierry Reding <treding@nvidia.com> Hi, this set of patches perform a bit of cleanup and extend support to the VDE implementation found on Tegra114 and Tegra124. This requires adding handling for a clock and a reset for the BSEV block that is separate from the main VDE block. The new VDE revision also supports reference picture marking, which requires that the BSEV writes out some related data to a memory location. Since the supported tiling layouts have been changed in Tegra124, which supports only block-linear and no pitch- linear layouts, a new way is added to request a specific layout for the decoded frames. Both of the above changes require breaking the ABI to accomodate for the new data in the custom IOCTL. Finally this set also adds support for dealing with an IOMMU, which makes it more convenient to deal with imported buffers since they no longer need to be physically contiguous. Userspace changes for the updated ABI are available here: https://cgit.freedesktop.org/~tagr/libvdpau-tegra/commit/ Mauro, I'm sending the device tree changes as part of the series for completeness, but I expect to pick those up into the Tegra tree once this has been reviewed and you've applied the driver changes. Thanks, Thierry Thierry Reding (14): staging: media: tegra-vde: Support BSEV clock and reset staging: media: tegra-vde: Support reference picture marking staging: media: tegra-vde: Prepare for interlacing support staging: media: tegra-vde: Use DRM/KMS framebuffer modifiers staging: media: tegra-vde: Properly mark invalid entries staging: media: tegra-vde: Print out invalid FD staging: media: tegra-vde: Add some clarifying comments staging: media: tegra-vde: Track struct device * staging: media: tegra-vde: Add IOMMU support staging: media: tegra-vde: Keep VDE in reset when unused ARM: tegra: Enable VDE on Tegra124 ARM: tegra: Add BSEV clock and reset for VDE on Tegra20 ARM: tegra: Add BSEV clock and reset for VDE on Tegra30 ARM: tegra: Enable SMMU for VDE on Tegra124 arch/arm/boot/dts/tegra124.dtsi | 42 ++ arch/arm/boot/dts/tegra20.dtsi | 10 +- arch/arm/boot/dts/tegra30.dtsi | 10 +- drivers/staging/media/tegra-vde/tegra-vde.c | 528 +++++++++++++++++--- drivers/staging/media/tegra-vde/uapi.h | 6 +- 5 files changed, 511 insertions(+), 85 deletions(-) -- 2.17.0
WARNING: multiple messages have this Message-ID (diff)
From: Thierry Reding <thierry.reding@gmail.com> To: Mauro Carvalho Chehab <mchehab@kernel.org>, Thierry Reding <thierry.reding@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Dmitry Osipenko <digetx@gmail.com>, Jonathan Hunter <jonathanh@nvidia.com>, linux-media@vger.kernel.org, linux-tegra@vger.kernel.org, devel@driverdev.osuosl.org Subject: [PATCH 00/14] staging: media: tegra-vdea: Add Tegra124 support Date: Mon, 13 Aug 2018 16:50:13 +0200 [thread overview] Message-ID: <20180813145027.16346-1-thierry.reding@gmail.com> (raw) From: Thierry Reding <treding@nvidia.com> Hi, this set of patches perform a bit of cleanup and extend support to the VDE implementation found on Tegra114 and Tegra124. This requires adding handling for a clock and a reset for the BSEV block that is separate from the main VDE block. The new VDE revision also supports reference picture marking, which requires that the BSEV writes out some related data to a memory location. Since the supported tiling layouts have been changed in Tegra124, which supports only block-linear and no pitch- linear layouts, a new way is added to request a specific layout for the decoded frames. Both of the above changes require breaking the ABI to accomodate for the new data in the custom IOCTL. Finally this set also adds support for dealing with an IOMMU, which makes it more convenient to deal with imported buffers since they no longer need to be physically contiguous. Userspace changes for the updated ABI are available here: https://cgit.freedesktop.org/~tagr/libvdpau-tegra/commit/ Mauro, I'm sending the device tree changes as part of the series for completeness, but I expect to pick those up into the Tegra tree once this has been reviewed and you've applied the driver changes. Thanks, Thierry Thierry Reding (14): staging: media: tegra-vde: Support BSEV clock and reset staging: media: tegra-vde: Support reference picture marking staging: media: tegra-vde: Prepare for interlacing support staging: media: tegra-vde: Use DRM/KMS framebuffer modifiers staging: media: tegra-vde: Properly mark invalid entries staging: media: tegra-vde: Print out invalid FD staging: media: tegra-vde: Add some clarifying comments staging: media: tegra-vde: Track struct device * staging: media: tegra-vde: Add IOMMU support staging: media: tegra-vde: Keep VDE in reset when unused ARM: tegra: Enable VDE on Tegra124 ARM: tegra: Add BSEV clock and reset for VDE on Tegra20 ARM: tegra: Add BSEV clock and reset for VDE on Tegra30 ARM: tegra: Enable SMMU for VDE on Tegra124 arch/arm/boot/dts/tegra124.dtsi | 42 ++ arch/arm/boot/dts/tegra20.dtsi | 10 +- arch/arm/boot/dts/tegra30.dtsi | 10 +- drivers/staging/media/tegra-vde/tegra-vde.c | 528 +++++++++++++++++--- drivers/staging/media/tegra-vde/uapi.h | 6 +- 5 files changed, 511 insertions(+), 85 deletions(-) -- 2.17.0
next reply other threads:[~2018-08-13 14:50 UTC|newest] Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-08-13 14:50 Thierry Reding [this message] 2018-08-13 14:50 ` [PATCH 00/14] staging: media: tegra-vdea: Add Tegra124 support Thierry Reding 2018-08-13 14:50 ` [PATCH 01/14] staging: media: tegra-vde: Support BSEV clock and reset Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-13 15:09 ` Dmitry Osipenko 2018-08-13 15:09 ` Dmitry Osipenko 2018-08-14 14:21 ` Thierry Reding 2018-08-14 14:21 ` Thierry Reding 2018-08-14 15:05 ` Dmitry Osipenko 2018-08-14 15:05 ` Dmitry Osipenko 2018-08-14 15:16 ` Dmitry Osipenko 2018-08-14 15:16 ` Dmitry Osipenko 2018-08-13 14:50 ` [PATCH 02/14] staging: media: tegra-vde: Support reference picture marking Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-18 12:48 ` Dmitry Osipenko 2018-08-18 12:48 ` Dmitry Osipenko 2018-08-13 14:50 ` [PATCH 03/14] staging: media: tegra-vde: Prepare for interlacing support Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-18 12:48 ` Dmitry Osipenko 2018-08-18 12:48 ` Dmitry Osipenko 2018-08-30 8:56 ` Dan Carpenter 2018-08-30 8:56 ` Dan Carpenter 2018-08-13 14:50 ` [PATCH 04/14] staging: media: tegra-vde: Use DRM/KMS framebuffer modifiers Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-18 12:53 ` Dmitry Osipenko 2018-08-18 12:53 ` Dmitry Osipenko 2018-08-13 14:50 ` [PATCH 05/14] staging: media: tegra-vde: Properly mark invalid entries Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-18 12:45 ` Dmitry Osipenko 2018-08-18 12:45 ` Dmitry Osipenko 2018-08-13 14:50 ` [PATCH 06/14] staging: media: tegra-vde: Print out invalid FD Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-18 12:45 ` Dmitry Osipenko 2018-08-18 12:45 ` Dmitry Osipenko 2018-08-13 14:50 ` [PATCH 07/14] staging: media: tegra-vde: Add some clarifying comments Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-18 12:50 ` Dmitry Osipenko 2018-08-18 12:50 ` Dmitry Osipenko 2018-08-13 14:50 ` [PATCH 08/14] staging: media: tegra-vde: Track struct device * Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-18 12:49 ` Dmitry Osipenko 2018-08-18 12:49 ` Dmitry Osipenko 2018-08-18 15:39 ` Dmitry Osipenko 2018-08-18 15:39 ` Dmitry Osipenko 2018-08-13 14:50 ` [PATCH 09/14] staging: media: tegra-vde: Add IOMMU support Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-18 12:50 ` Dmitry Osipenko 2018-08-18 12:50 ` Dmitry Osipenko 2018-08-18 13:07 ` Dmitry Osipenko 2018-08-18 13:07 ` Dmitry Osipenko 2018-08-18 13:29 ` Dmitry Osipenko 2018-08-18 13:29 ` Dmitry Osipenko 2018-08-13 14:50 ` [PATCH 10/14] staging: media: tegra-vde: Keep VDE in reset when unused Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-18 12:50 ` Dmitry Osipenko 2018-08-18 12:50 ` Dmitry Osipenko 2018-08-13 14:50 ` [PATCH 11/14] ARM: tegra: Enable VDE on Tegra124 Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-18 12:45 ` Dmitry Osipenko 2018-08-18 12:45 ` Dmitry Osipenko 2018-08-13 14:50 ` [PATCH 12/14] ARM: tegra: Add BSEV clock and reset for VDE on Tegra20 Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-13 14:50 ` [PATCH 13/14] ARM: tegra: Add BSEV clock and reset for VDE on Tegra30 Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-13 14:50 ` [PATCH 14/14] ARM: tegra: Enable SMMU for VDE on Tegra124 Thierry Reding 2018-08-13 14:50 ` Thierry Reding 2018-08-18 12:45 ` Dmitry Osipenko 2018-08-18 12:45 ` Dmitry Osipenko 2018-09-03 12:18 ` [PATCH 00/14] staging: media: tegra-vdea: Add Tegra124 support Hans Verkuil 2018-09-03 12:18 ` Hans Verkuil 2018-09-03 13:12 ` Thierry Reding 2018-09-03 13:12 ` Thierry Reding
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180813145027.16346-1-thierry.reding@gmail.com \ --to=thierry.reding@gmail.com \ --cc=devel@driverdev.osuosl.org \ --cc=digetx@gmail.com \ --cc=gregkh@linuxfoundation.org \ --cc=jonathanh@nvidia.com \ --cc=linux-media@vger.kernel.org \ --cc=linux-tegra@vger.kernel.org \ --cc=mchehab@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.