All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages
@ 2018-09-06 15:33 Marek Marczykowski-Górecki
  2018-09-06 20:14 ` Boris Ostrovsky
                   ` (4 more replies)
  0 siblings, 5 replies; 12+ messages in thread
From: Marek Marczykowski-Górecki @ 2018-09-06 15:33 UTC (permalink / raw)
  To: xen-devel
  Cc: Marek Marczykowski-Górecki, Boris Ostrovsky, Juergen Gross,
	open list

Scrubbing pages on initial balloon down can take some time, especially
in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
started with memory= significantly lower than maxmem=, all the extra
pages will be scrubbed before returning to Xen. But since most of them
weren't used at all at that point, Xen needs to populate them first
(from populate-on-demand pool). In nested virt case (Xen inside KVM)
this slows down the guest boot by 15-30s with just 1.5GB needed to be
returned to Xen.

Add runtime parameter to enable/disable it, to allow initially disabling
scrubbing, then enable it back during boot (for example in initramfs).
Such usage relies on assumption that a) most pages ballooned out during
initial boot weren't used at all, and b) even if they were, very few
secrets are in the guest at that time (before any serious userspace
kicks in).

Default behaviour is unchanged.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

---
Is module_param() a good thing for this? Other xen-balloon parameters are
in /sys/devices/system/xen_memory, so maybe it would make sense to put
this one there too? But then, cmdline parameter would need to be added
separately and comment about core_param() suggests it shouldn't be used
if not absolutely necessary (is it?).
---
 drivers/xen/Kconfig           |  5 ++++-
 drivers/xen/mem-reservation.c |  7 +++++++
 include/xen/mem-reservation.h | 11 ++++++++---
 3 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index b459edfacff3..7b2c771e1813 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -87,7 +87,10 @@ config XEN_SCRUB_PAGES
 	  Scrub pages before returning them to the system for reuse by
 	  other domains.  This makes sure that any confidential data
 	  is not accidentally visible to other domains.  Is it more
-	  secure, but slightly less efficient.
+	  secure, but slightly less efficient. It can be disabled with
+	  mem_reservation.xen_scrub_pages=0 and also controlled at runtime with
+	  /sys/module/mem_reservation/parameters/xen_scrub_pages.
+
 	  If in doubt, say yes.
 
 config XEN_DEV_EVTCHN
diff --git a/drivers/xen/mem-reservation.c b/drivers/xen/mem-reservation.c
index 084799c6180e..5f08e19b6139 100644
--- a/drivers/xen/mem-reservation.c
+++ b/drivers/xen/mem-reservation.c
@@ -14,6 +14,13 @@
 
 #include <xen/interface/memory.h>
 #include <xen/mem-reservation.h>
+#include <linux/moduleparam.h>
+
+#ifdef CONFIG_XEN_SCRUB_PAGES
+bool __read_mostly xen_scrub_pages = true;
+module_param(xen_scrub_pages, bool, 0644);
+MODULE_PARM_DESC(xen_scrub_pages, "Scrub ballooned pages before giving them back to Xen");
+#endif
 
 /*
  * Use one extent per PAGE_SIZE to avoid to break down the page into
diff --git a/include/xen/mem-reservation.h b/include/xen/mem-reservation.h
index 80b52b4945e9..70c08f95bc84 100644
--- a/include/xen/mem-reservation.h
+++ b/include/xen/mem-reservation.h
@@ -17,12 +17,17 @@
 
 #include <xen/page.h>
 
+#ifdef CONFIG_XEN_SCRUB_PAGES
+extern bool xen_scrub_pages;
+
 static inline void xenmem_reservation_scrub_page(struct page *page)
 {
-#ifdef CONFIG_XEN_SCRUB_PAGES
-	clear_highpage(page);
-#endif
+	if (xen_scrub_pages)
+		clear_highpage(page);
 }
+#else
+static inline void xenmem_reservation_scrub_page(struct page *page) { }
+#endif
 
 #ifdef CONFIG_XEN_HAVE_PVMMU
 void __xenmem_reservation_va_mapping_update(unsigned long count,
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages
  2018-09-06 15:33 [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages Marek Marczykowski-Górecki
  2018-09-06 20:14 ` Boris Ostrovsky
@ 2018-09-06 20:14 ` Boris Ostrovsky
  2018-09-06 20:31   ` Marek Marczykowski-Górecki
                     ` (3 more replies)
  2018-09-07  6:51 ` [Xen-devel] " Jan Beulich
                   ` (2 subsequent siblings)
  4 siblings, 4 replies; 12+ messages in thread
From: Boris Ostrovsky @ 2018-09-06 20:14 UTC (permalink / raw)
  To: Marek Marczykowski-Górecki, xen-devel; +Cc: Juergen Gross, open list

On 09/06/2018 11:33 AM, Marek Marczykowski-Górecki wrote:
> Scrubbing pages on initial balloon down can take some time, especially
> in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
> started with memory= significantly lower than maxmem=, all the extra
> pages will be scrubbed before returning to Xen. But since most of them
> weren't used at all at that point, Xen needs to populate them first
> (from populate-on-demand pool). In nested virt case (Xen inside KVM)
> this slows down the guest boot by 15-30s with just 1.5GB needed to be
> returned to Xen.
>
> Add runtime parameter to enable/disable it, to allow initially disabling
> scrubbing, then enable it back during boot (for example in initramfs).
> Such usage relies on assumption that a) most pages ballooned out during
> initial boot weren't used at all, and b) even if they were, very few
> secrets are in the guest at that time (before any serious userspace
> kicks in).
>
> Default behaviour is unchanged.
>
> Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
>
> ---
> Is module_param() a good thing for this? Other xen-balloon parameters are
> in /sys/devices/system/xen_memory, so maybe it would make sense to put
> this one there too? But then, cmdline parameter would need to be added
> separately and comment about core_param() suggests it shouldn't be used
> if not absolutely necessary (is it?).


You can also use cmdline_find_option() in the balloon driver.

I would prefer that all tunables for the balloon driver live in the same
place. (Note that in that case
Documentation/ABI/stable/sysfs-devices-system-xen_memory will need to be
updated).


-boris



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages
  2018-09-06 15:33 [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages Marek Marczykowski-Górecki
@ 2018-09-06 20:14 ` Boris Ostrovsky
  2018-09-06 20:14 ` Boris Ostrovsky
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 12+ messages in thread
From: Boris Ostrovsky @ 2018-09-06 20:14 UTC (permalink / raw)
  To: Marek Marczykowski-Górecki, xen-devel; +Cc: Juergen Gross, open list

On 09/06/2018 11:33 AM, Marek Marczykowski-Górecki wrote:
> Scrubbing pages on initial balloon down can take some time, especially
> in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
> started with memory= significantly lower than maxmem=, all the extra
> pages will be scrubbed before returning to Xen. But since most of them
> weren't used at all at that point, Xen needs to populate them first
> (from populate-on-demand pool). In nested virt case (Xen inside KVM)
> this slows down the guest boot by 15-30s with just 1.5GB needed to be
> returned to Xen.
>
> Add runtime parameter to enable/disable it, to allow initially disabling
> scrubbing, then enable it back during boot (for example in initramfs).
> Such usage relies on assumption that a) most pages ballooned out during
> initial boot weren't used at all, and b) even if they were, very few
> secrets are in the guest at that time (before any serious userspace
> kicks in).
>
> Default behaviour is unchanged.
>
> Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
>
> ---
> Is module_param() a good thing for this? Other xen-balloon parameters are
> in /sys/devices/system/xen_memory, so maybe it would make sense to put
> this one there too? But then, cmdline parameter would need to be added
> separately and comment about core_param() suggests it shouldn't be used
> if not absolutely necessary (is it?).


You can also use cmdline_find_option() in the balloon driver.

I would prefer that all tunables for the balloon driver live in the same
place. (Note that in that case
Documentation/ABI/stable/sysfs-devices-system-xen_memory will need to be
updated).


-boris



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages
  2018-09-06 20:14 ` Boris Ostrovsky
  2018-09-06 20:31   ` Marek Marczykowski-Górecki
@ 2018-09-06 20:31   ` Marek Marczykowski-Górecki
  2018-09-06 20:59   ` Marek Marczykowski-Górecki
  2018-09-06 20:59   ` Marek Marczykowski-Górecki
  3 siblings, 0 replies; 12+ messages in thread
From: Marek Marczykowski-Górecki @ 2018-09-06 20:31 UTC (permalink / raw)
  To: Boris Ostrovsky; +Cc: xen-devel, Juergen Gross, open list

[-- Attachment #1: Type: text/plain, Size: 2233 bytes --]

On Thu, Sep 06, 2018 at 04:14:50PM -0400, Boris Ostrovsky wrote:
> On 09/06/2018 11:33 AM, Marek Marczykowski-Górecki wrote:
> > Scrubbing pages on initial balloon down can take some time, especially
> > in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
> > started with memory= significantly lower than maxmem=, all the extra
> > pages will be scrubbed before returning to Xen. But since most of them
> > weren't used at all at that point, Xen needs to populate them first
> > (from populate-on-demand pool). In nested virt case (Xen inside KVM)
> > this slows down the guest boot by 15-30s with just 1.5GB needed to be
> > returned to Xen.
> >
> > Add runtime parameter to enable/disable it, to allow initially disabling
> > scrubbing, then enable it back during boot (for example in initramfs).
> > Such usage relies on assumption that a) most pages ballooned out during
> > initial boot weren't used at all, and b) even if they were, very few
> > secrets are in the guest at that time (before any serious userspace
> > kicks in).
> >
> > Default behaviour is unchanged.
> >
> > Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
> >
> > ---
> > Is module_param() a good thing for this? Other xen-balloon parameters are
> > in /sys/devices/system/xen_memory, so maybe it would make sense to put
> > this one there too? But then, cmdline parameter would need to be added
> > separately and comment about core_param() suggests it shouldn't be used
> > if not absolutely necessary (is it?).
> 
> 
> You can also use cmdline_find_option() in the balloon driver.
> 
> I would prefer that all tunables for the balloon driver live in the same
> place. (Note that in that case
> Documentation/ABI/stable/sysfs-devices-system-xen_memory will need to be
> updated).

Ok, will move that. This will also mean that it will affect only balloon
driver, not other users of mem-reservation.c (grant allocator). But
given the reason for this tunable, I think that's fine.

-- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages
  2018-09-06 20:14 ` Boris Ostrovsky
@ 2018-09-06 20:31   ` Marek Marczykowski-Górecki
  2018-09-06 20:31   ` Marek Marczykowski-Górecki
                     ` (2 subsequent siblings)
  3 siblings, 0 replies; 12+ messages in thread
From: Marek Marczykowski-Górecki @ 2018-09-06 20:31 UTC (permalink / raw)
  To: Boris Ostrovsky; +Cc: Juergen Gross, xen-devel, open list


[-- Attachment #1.1: Type: text/plain, Size: 2233 bytes --]

On Thu, Sep 06, 2018 at 04:14:50PM -0400, Boris Ostrovsky wrote:
> On 09/06/2018 11:33 AM, Marek Marczykowski-Górecki wrote:
> > Scrubbing pages on initial balloon down can take some time, especially
> > in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
> > started with memory= significantly lower than maxmem=, all the extra
> > pages will be scrubbed before returning to Xen. But since most of them
> > weren't used at all at that point, Xen needs to populate them first
> > (from populate-on-demand pool). In nested virt case (Xen inside KVM)
> > this slows down the guest boot by 15-30s with just 1.5GB needed to be
> > returned to Xen.
> >
> > Add runtime parameter to enable/disable it, to allow initially disabling
> > scrubbing, then enable it back during boot (for example in initramfs).
> > Such usage relies on assumption that a) most pages ballooned out during
> > initial boot weren't used at all, and b) even if they were, very few
> > secrets are in the guest at that time (before any serious userspace
> > kicks in).
> >
> > Default behaviour is unchanged.
> >
> > Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
> >
> > ---
> > Is module_param() a good thing for this? Other xen-balloon parameters are
> > in /sys/devices/system/xen_memory, so maybe it would make sense to put
> > this one there too? But then, cmdline parameter would need to be added
> > separately and comment about core_param() suggests it shouldn't be used
> > if not absolutely necessary (is it?).
> 
> 
> You can also use cmdline_find_option() in the balloon driver.
> 
> I would prefer that all tunables for the balloon driver live in the same
> place. (Note that in that case
> Documentation/ABI/stable/sysfs-devices-system-xen_memory will need to be
> updated).

Ok, will move that. This will also mean that it will affect only balloon
driver, not other users of mem-reservation.c (grant allocator). But
given the reason for this tunable, I think that's fine.

-- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 157 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages
  2018-09-06 20:14 ` Boris Ostrovsky
  2018-09-06 20:31   ` Marek Marczykowski-Górecki
  2018-09-06 20:31   ` Marek Marczykowski-Górecki
@ 2018-09-06 20:59   ` Marek Marczykowski-Górecki
  2018-09-06 20:59   ` Marek Marczykowski-Górecki
  3 siblings, 0 replies; 12+ messages in thread
From: Marek Marczykowski-Górecki @ 2018-09-06 20:59 UTC (permalink / raw)
  To: Boris Ostrovsky; +Cc: xen-devel, Juergen Gross, open list

[-- Attachment #1: Type: text/plain, Size: 428 bytes --]

On Thu, Sep 06, 2018 at 04:14:50PM -0400, Boris Ostrovsky wrote:
> You can also use cmdline_find_option() in the balloon driver.

This looks to be x86 only (?!), which doesn't sound right in
drivers/xen/. I'll use core_param() for now...

-- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages
  2018-09-06 20:14 ` Boris Ostrovsky
                     ` (2 preceding siblings ...)
  2018-09-06 20:59   ` Marek Marczykowski-Górecki
@ 2018-09-06 20:59   ` Marek Marczykowski-Górecki
  3 siblings, 0 replies; 12+ messages in thread
From: Marek Marczykowski-Górecki @ 2018-09-06 20:59 UTC (permalink / raw)
  To: Boris Ostrovsky; +Cc: Juergen Gross, xen-devel, open list


[-- Attachment #1.1: Type: text/plain, Size: 428 bytes --]

On Thu, Sep 06, 2018 at 04:14:50PM -0400, Boris Ostrovsky wrote:
> You can also use cmdline_find_option() in the balloon driver.

This looks to be x86 only (?!), which doesn't sound right in
drivers/xen/. I'll use core_param() for now...

-- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 157 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [Xen-devel] [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages
  2018-09-06 15:33 [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages Marek Marczykowski-Górecki
  2018-09-06 20:14 ` Boris Ostrovsky
  2018-09-06 20:14 ` Boris Ostrovsky
@ 2018-09-07  6:51 ` Jan Beulich
  2018-09-07  6:51 ` Jan Beulich
       [not found] ` <5B921FEE02000078001E6258@suse.com>
  4 siblings, 0 replies; 12+ messages in thread
From: Jan Beulich @ 2018-09-07  6:51 UTC (permalink / raw)
  To: Marek Marczykowski
  Cc: xen-devel, Boris Ostrovsky, Juergen Gross, linux-kernel

>>> On 06.09.18 at 17:33, <marmarek@invisiblethingslab.com> wrote:
> --- a/include/xen/mem-reservation.h
> +++ b/include/xen/mem-reservation.h
> @@ -17,12 +17,17 @@
>  
>  #include <xen/page.h>
>  
> +#ifdef CONFIG_XEN_SCRUB_PAGES
> +extern bool xen_scrub_pages;
> +
>  static inline void xenmem_reservation_scrub_page(struct page *page)
>  {
> -#ifdef CONFIG_XEN_SCRUB_PAGES
> -	clear_highpage(page);
> -#endif
> +	if (xen_scrub_pages)
> +		clear_highpage(page);
>  }
> +#else
> +static inline void xenmem_reservation_scrub_page(struct page *page) { }
> +#endif

Wouldn't CONFIG_XEN_SCRUB_PAGES then better become
CONFIG_XEN_SCRUB_PAGES_DEFAULT, with the value used as
initializer of xen_scrub_pages?

Jan



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages
  2018-09-06 15:33 [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages Marek Marczykowski-Górecki
                   ` (2 preceding siblings ...)
  2018-09-07  6:51 ` [Xen-devel] " Jan Beulich
@ 2018-09-07  6:51 ` Jan Beulich
       [not found] ` <5B921FEE02000078001E6258@suse.com>
  4 siblings, 0 replies; 12+ messages in thread
From: Jan Beulich @ 2018-09-07  6:51 UTC (permalink / raw)
  To: Marek Marczykowski
  Cc: Juergen Gross, xen-devel, Boris Ostrovsky, linux-kernel

>>> On 06.09.18 at 17:33, <marmarek@invisiblethingslab.com> wrote:
> --- a/include/xen/mem-reservation.h
> +++ b/include/xen/mem-reservation.h
> @@ -17,12 +17,17 @@
>  
>  #include <xen/page.h>
>  
> +#ifdef CONFIG_XEN_SCRUB_PAGES
> +extern bool xen_scrub_pages;
> +
>  static inline void xenmem_reservation_scrub_page(struct page *page)
>  {
> -#ifdef CONFIG_XEN_SCRUB_PAGES
> -	clear_highpage(page);
> -#endif
> +	if (xen_scrub_pages)
> +		clear_highpage(page);
>  }
> +#else
> +static inline void xenmem_reservation_scrub_page(struct page *page) { }
> +#endif

Wouldn't CONFIG_XEN_SCRUB_PAGES then better become
CONFIG_XEN_SCRUB_PAGES_DEFAULT, with the value used as
initializer of xen_scrub_pages?

Jan



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [Xen-devel] [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages
       [not found] ` <5B921FEE02000078001E6258@suse.com>
  2018-09-07 13:16   ` Juergen Gross
@ 2018-09-07 13:16   ` Juergen Gross
  1 sibling, 0 replies; 12+ messages in thread
From: Juergen Gross @ 2018-09-07 13:16 UTC (permalink / raw)
  To: Jan Beulich, Marek Marczykowski; +Cc: xen-devel, Boris Ostrovsky, lkml

On 07/09/18 08:51, Jan Beulich wrote:
>>>> On 06.09.18 at 17:33, <marmarek@invisiblethingslab.com> wrote:
>> --- a/include/xen/mem-reservation.h
>> +++ b/include/xen/mem-reservation.h
>> @@ -17,12 +17,17 @@
>>  
>>  #include <xen/page.h>
>>  
>> +#ifdef CONFIG_XEN_SCRUB_PAGES
>> +extern bool xen_scrub_pages;
>> +
>>  static inline void xenmem_reservation_scrub_page(struct page *page)
>>  {
>> -#ifdef CONFIG_XEN_SCRUB_PAGES
>> -	clear_highpage(page);
>> -#endif
>> +	if (xen_scrub_pages)
>> +		clear_highpage(page);
>>  }
>> +#else
>> +static inline void xenmem_reservation_scrub_page(struct page *page) { }
>> +#endif
> 
> Wouldn't CONFIG_XEN_SCRUB_PAGES then better become
> CONFIG_XEN_SCRUB_PAGES_DEFAULT, with the value used as
> initializer of xen_scrub_pages?

Yes, I'd like that better.


Juergen

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages
       [not found] ` <5B921FEE02000078001E6258@suse.com>
@ 2018-09-07 13:16   ` Juergen Gross
  2018-09-07 13:16   ` [Xen-devel] " Juergen Gross
  1 sibling, 0 replies; 12+ messages in thread
From: Juergen Gross @ 2018-09-07 13:16 UTC (permalink / raw)
  To: Jan Beulich, Marek Marczykowski; +Cc: xen-devel, Boris Ostrovsky, lkml

On 07/09/18 08:51, Jan Beulich wrote:
>>>> On 06.09.18 at 17:33, <marmarek@invisiblethingslab.com> wrote:
>> --- a/include/xen/mem-reservation.h
>> +++ b/include/xen/mem-reservation.h
>> @@ -17,12 +17,17 @@
>>  
>>  #include <xen/page.h>
>>  
>> +#ifdef CONFIG_XEN_SCRUB_PAGES
>> +extern bool xen_scrub_pages;
>> +
>>  static inline void xenmem_reservation_scrub_page(struct page *page)
>>  {
>> -#ifdef CONFIG_XEN_SCRUB_PAGES
>> -	clear_highpage(page);
>> -#endif
>> +	if (xen_scrub_pages)
>> +		clear_highpage(page);
>>  }
>> +#else
>> +static inline void xenmem_reservation_scrub_page(struct page *page) { }
>> +#endif
> 
> Wouldn't CONFIG_XEN_SCRUB_PAGES then better become
> CONFIG_XEN_SCRUB_PAGES_DEFAULT, with the value used as
> initializer of xen_scrub_pages?

Yes, I'd like that better.


Juergen

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages
@ 2018-09-06 15:33 Marek Marczykowski-Górecki
  0 siblings, 0 replies; 12+ messages in thread
From: Marek Marczykowski-Górecki @ 2018-09-06 15:33 UTC (permalink / raw)
  To: xen-devel
  Cc: Juergen Gross, Boris Ostrovsky, Marek Marczykowski-Górecki,
	open list

Scrubbing pages on initial balloon down can take some time, especially
in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
started with memory= significantly lower than maxmem=, all the extra
pages will be scrubbed before returning to Xen. But since most of them
weren't used at all at that point, Xen needs to populate them first
(from populate-on-demand pool). In nested virt case (Xen inside KVM)
this slows down the guest boot by 15-30s with just 1.5GB needed to be
returned to Xen.

Add runtime parameter to enable/disable it, to allow initially disabling
scrubbing, then enable it back during boot (for example in initramfs).
Such usage relies on assumption that a) most pages ballooned out during
initial boot weren't used at all, and b) even if they were, very few
secrets are in the guest at that time (before any serious userspace
kicks in).

Default behaviour is unchanged.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

---
Is module_param() a good thing for this? Other xen-balloon parameters are
in /sys/devices/system/xen_memory, so maybe it would make sense to put
this one there too? But then, cmdline parameter would need to be added
separately and comment about core_param() suggests it shouldn't be used
if not absolutely necessary (is it?).
---
 drivers/xen/Kconfig           |  5 ++++-
 drivers/xen/mem-reservation.c |  7 +++++++
 include/xen/mem-reservation.h | 11 ++++++++---
 3 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index b459edfacff3..7b2c771e1813 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -87,7 +87,10 @@ config XEN_SCRUB_PAGES
 	  Scrub pages before returning them to the system for reuse by
 	  other domains.  This makes sure that any confidential data
 	  is not accidentally visible to other domains.  Is it more
-	  secure, but slightly less efficient.
+	  secure, but slightly less efficient. It can be disabled with
+	  mem_reservation.xen_scrub_pages=0 and also controlled at runtime with
+	  /sys/module/mem_reservation/parameters/xen_scrub_pages.
+
 	  If in doubt, say yes.
 
 config XEN_DEV_EVTCHN
diff --git a/drivers/xen/mem-reservation.c b/drivers/xen/mem-reservation.c
index 084799c6180e..5f08e19b6139 100644
--- a/drivers/xen/mem-reservation.c
+++ b/drivers/xen/mem-reservation.c
@@ -14,6 +14,13 @@
 
 #include <xen/interface/memory.h>
 #include <xen/mem-reservation.h>
+#include <linux/moduleparam.h>
+
+#ifdef CONFIG_XEN_SCRUB_PAGES
+bool __read_mostly xen_scrub_pages = true;
+module_param(xen_scrub_pages, bool, 0644);
+MODULE_PARM_DESC(xen_scrub_pages, "Scrub ballooned pages before giving them back to Xen");
+#endif
 
 /*
  * Use one extent per PAGE_SIZE to avoid to break down the page into
diff --git a/include/xen/mem-reservation.h b/include/xen/mem-reservation.h
index 80b52b4945e9..70c08f95bc84 100644
--- a/include/xen/mem-reservation.h
+++ b/include/xen/mem-reservation.h
@@ -17,12 +17,17 @@
 
 #include <xen/page.h>
 
+#ifdef CONFIG_XEN_SCRUB_PAGES
+extern bool xen_scrub_pages;
+
 static inline void xenmem_reservation_scrub_page(struct page *page)
 {
-#ifdef CONFIG_XEN_SCRUB_PAGES
-	clear_highpage(page);
-#endif
+	if (xen_scrub_pages)
+		clear_highpage(page);
 }
+#else
+static inline void xenmem_reservation_scrub_page(struct page *page) { }
+#endif
 
 #ifdef CONFIG_XEN_HAVE_PVMMU
 void __xenmem_reservation_va_mapping_update(unsigned long count,
-- 
2.17.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

^ permalink raw reply related	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2018-09-07 13:16 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-06 15:33 [PATCH] xen/balloon: add runtime control for scrubbing ballooned out pages Marek Marczykowski-Górecki
2018-09-06 20:14 ` Boris Ostrovsky
2018-09-06 20:14 ` Boris Ostrovsky
2018-09-06 20:31   ` Marek Marczykowski-Górecki
2018-09-06 20:31   ` Marek Marczykowski-Górecki
2018-09-06 20:59   ` Marek Marczykowski-Górecki
2018-09-06 20:59   ` Marek Marczykowski-Górecki
2018-09-07  6:51 ` [Xen-devel] " Jan Beulich
2018-09-07  6:51 ` Jan Beulich
     [not found] ` <5B921FEE02000078001E6258@suse.com>
2018-09-07 13:16   ` Juergen Gross
2018-09-07 13:16   ` [Xen-devel] " Juergen Gross
2018-09-06 15:33 Marek Marczykowski-Górecki

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.