All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Horman <horms@verge.net.au>
To: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org,
	Chris Paterson <chris.paterson2@renesas.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Biju Das <biju.das@bp.renesas.com>,
	linux-renesas-soc@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
Date: Tue, 11 Sep 2018 15:32:21 +0200	[thread overview]
Message-ID: <20180911133220.3kjx5dqp65drx3qs@verge.net.au> (raw)
In-Reply-To: <1536576195-11520-4-git-send-email-fabrizio.castro@bp.renesas.com>

On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> From: Chris Paterson <chris.paterson2@renesas.com>
> 
> Add the device nodes for both RZ/G2M CAN channels.
> 
> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> 
> v1->v2:
> * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
>   Geert's comment.
> 
> This patch applies on top of renesas-devel-20180906-v4.19-rc2.

Thanks Fabrizio,

I would like to waif for the bindings to be accepted before accepting this
patch.

> 
>  arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> index 046fc93..867e875 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> @@ -874,6 +874,30 @@
>  			status = "disabled";
>  		};
>  
> +		can0: can@e6c30000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c30000 0 0x1000>;
> +			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 916>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 916>;
> +			status = "disabled";
> +		};
> +
> +		can1: can@e6c38000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c38000 0 0x1000>;
> +			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 915>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 915>;
> +			status = "disabled";
> +		};
> +
>  		pwm0: pwm@e6e30000 {
>  			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
>  			reg = <0 0xe6e30000 0 0x8>;
> -- 
> 2.7.4
> 

WARNING: multiple messages have this Message-ID (diff)
From: Simon Horman <horms@verge.net.au>
To: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Chris Paterson <chris.paterson2@renesas.com>,
	Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-renesas-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Biju Das <biju.das@bp.renesas.com>
Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
Date: Tue, 11 Sep 2018 15:32:21 +0200	[thread overview]
Message-ID: <20180911133220.3kjx5dqp65drx3qs@verge.net.au> (raw)
In-Reply-To: <1536576195-11520-4-git-send-email-fabrizio.castro@bp.renesas.com>

On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> From: Chris Paterson <chris.paterson2@renesas.com>
> 
> Add the device nodes for both RZ/G2M CAN channels.
> 
> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> 
> v1->v2:
> * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
>   Geert's comment.
> 
> This patch applies on top of renesas-devel-20180906-v4.19-rc2.

Thanks Fabrizio,

I would like to waif for the bindings to be accepted before accepting this
patch.

> 
>  arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> index 046fc93..867e875 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> @@ -874,6 +874,30 @@
>  			status = "disabled";
>  		};
>  
> +		can0: can@e6c30000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c30000 0 0x1000>;
> +			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 916>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 916>;
> +			status = "disabled";
> +		};
> +
> +		can1: can@e6c38000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c38000 0 0x1000>;
> +			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 915>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 915>;
> +			status = "disabled";
> +		};
> +
>  		pwm0: pwm@e6e30000 {
>  			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
>  			reg = <0 0xe6e30000 0 0x8>;
> -- 
> 2.7.4
> 

WARNING: multiple messages have this Message-ID (diff)
From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
Date: Tue, 11 Sep 2018 15:32:21 +0200	[thread overview]
Message-ID: <20180911133220.3kjx5dqp65drx3qs@verge.net.au> (raw)
In-Reply-To: <1536576195-11520-4-git-send-email-fabrizio.castro@bp.renesas.com>

On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> From: Chris Paterson <chris.paterson2@renesas.com>
> 
> Add the device nodes for both RZ/G2M CAN channels.
> 
> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> 
> v1->v2:
> * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
>   Geert's comment.
> 
> This patch applies on top of renesas-devel-20180906-v4.19-rc2.

Thanks Fabrizio,

I would like to waif for the bindings to be accepted before accepting this
patch.

> 
>  arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> index 046fc93..867e875 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> @@ -874,6 +874,30 @@
>  			status = "disabled";
>  		};
>  
> +		can0: can at e6c30000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c30000 0 0x1000>;
> +			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 916>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 916>;
> +			status = "disabled";
> +		};
> +
> +		can1: can at e6c38000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c38000 0 0x1000>;
> +			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 915>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 915>;
> +			status = "disabled";
> +		};
> +
>  		pwm0: pwm at e6e30000 {
>  			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
>  			reg = <0 0xe6e30000 0 0x8>;
> -- 
> 2.7.4
> 

  reply	other threads:[~2018-09-11 13:32 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-10 10:43 [PATCH v2 0/3] Add can support to RZ/G2M Fabrizio Castro
2018-09-10 10:43 ` [PATCH v2 1/3][can-next] can: rcar_can: Fix erroneous registration Fabrizio Castro
2018-09-11 13:31   ` Simon Horman
2018-11-08 12:39   ` Fabrizio Castro
2018-11-08 13:20     ` Simon Horman
2018-09-10 10:43 ` [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support Fabrizio Castro
2018-09-11 13:31   ` Simon Horman
2018-09-24 16:17   ` Rob Herring
2018-11-08 11:25   ` Fabrizio Castro
2018-11-08 11:25     ` Fabrizio Castro
2018-11-08 12:46     ` Simon Horman
2018-11-08 12:46       ` Simon Horman
2018-11-08 14:05       ` Fabrizio Castro
2018-11-08 14:05         ` Fabrizio Castro
2018-09-10 10:43 ` [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes Fabrizio Castro
2018-09-10 10:43   ` Fabrizio Castro
2018-09-10 10:43   ` Fabrizio Castro
2018-09-11 13:32   ` Simon Horman [this message]
2018-09-11 13:32     ` Simon Horman
2018-09-11 13:32     ` Simon Horman
2018-09-27 10:53     ` Fabrizio Castro
2018-09-27 10:53       ` Fabrizio Castro
2018-09-27 10:53       ` Fabrizio Castro
2018-10-01 12:44       ` Simon Horman
2018-10-01 12:44         ` Simon Horman
2018-10-01 12:44         ` Simon Horman
2018-10-18 13:18       ` Simon Horman
2018-10-18 13:18         ` Simon Horman
2018-10-18 13:18         ` Simon Horman
2018-09-27 10:45 ` [PATCH v2 0/3] Add can support to RZ/G2M Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180911133220.3kjx5dqp65drx3qs@verge.net.au \
    --to=horms@verge.net.au \
    --cc=biju.das@bp.renesas.com \
    --cc=catalin.marinas@arm.com \
    --cc=chris.paterson2@renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabrizio.castro@bp.renesas.com \
    --cc=geert+renesas@glider.be \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.