From: Quentin Schulz <quentin.schulz@bootlin.com> To: Oskari Lemmela <oskari@lemmela.net> Cc: Sebastian Reichel <sre@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Chen-Yu Tsai <wens@csie.org>, Maxime Ripard <maxime.ripard@bootlin.com>, Lee Jones <lee.jones@linaro.org>, Quentin Schulz <quentin.schulz@free-electrons.com>, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH v2 5/6] mfd: axp20x: add support AXP803 AC and battery power supplies Date: Mon, 8 Oct 2018 09:33:12 +0200 [thread overview] Message-ID: <20181008073312.otdz25ttvew6fzk2@qschulz> (raw) In-Reply-To: <20181006211836.28253-6-oskari@lemmela.net> [-- Attachment #1: Type: text/plain, Size: 2678 bytes --] Hi Oskari, On Sun, Oct 07, 2018 at 12:18:35AM +0300, Oskari Lemmela wrote: > AXP803 is compatible with AXP813. > Adding needed cells for AC and battery power supplies. > > AXP813 AC power supply cell added. > > Signed-off-by: Oskari Lemmela <oskari@lemmela.net> > --- > drivers/mfd/axp20x.c | 22 +++++++++++++++++++++- > include/linux/mfd/axp20x.h | 1 + > 2 files changed, 22 insertions(+), 1 deletion(-) > > diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c > index 0be511dd93d0..215f0b009728 100644 > --- a/drivers/mfd/axp20x.c > +++ b/drivers/mfd/axp20x.c > @@ -731,8 +731,23 @@ static const struct mfd_cell axp803_cells[] = { > .name = "axp221-pek", > .num_resources = ARRAY_SIZE(axp803_pek_resources), > .resources = axp803_pek_resources, > + }, { > + .name = "axp20x-regulator" > + }, { > + .name = "axp20x-gpio", > + .of_compatible = "x-powers,axp813-gpio", > + }, { > + .name = "axp813-adc", > + .of_compatible = "x-powers,axp813-adc", > + }, { > + .name = "axp20x-battery-power-supply", > + .of_compatible = "x-powers,axp813-battery-power-supply", > + }, { > + .name = "axp20x-ac-power-supply", > + .of_compatible = "x-powers,axp813-ac-power-supply", > + .num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), > + .resources = axp20x_ac_power_supply_resources, > }, > - { .name = "axp20x-regulator" }, > }; > > static const struct mfd_cell axp806_self_working_cells[] = { > @@ -778,6 +793,11 @@ static const struct mfd_cell axp813_cells[] = { > }, { > .name = "axp20x-battery-power-supply", > .of_compatible = "x-powers,axp813-battery-power-supply", > + }, { > + .name = "axp20x-ac-power-supply", > + .of_compatible = "x-powers,axp813-ac-power-supply", > + .num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), > + .resources = axp20x_ac_power_supply_resources, I'll let Maxime or Chen-Yu tell you what they want but I think we could have two different commits, one for AXP803 and one for AXP813. I don't think we care about having one commit per added resource for the axp803 though. > }, > }; > > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h > index 517e60eecbcb..2302b620d238 100644 > --- a/include/linux/mfd/axp20x.h > +++ b/include/linux/mfd/axp20x.h > @@ -266,6 +266,7 @@ enum axp20x_variants { > #define AXP288_RT_BATT_V_H 0xa0 > #define AXP288_RT_BATT_V_L 0xa1 > > +#define AXP813_ACIN_PATH_CTRL 0x3a You're not using it in this patch, please keep this change in the commit where its use is introduced. Thanks, Quentin [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: quentin.schulz@bootlin.com (Quentin Schulz) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 5/6] mfd: axp20x: add support AXP803 AC and battery power supplies Date: Mon, 8 Oct 2018 09:33:12 +0200 [thread overview] Message-ID: <20181008073312.otdz25ttvew6fzk2@qschulz> (raw) In-Reply-To: <20181006211836.28253-6-oskari@lemmela.net> Hi Oskari, On Sun, Oct 07, 2018 at 12:18:35AM +0300, Oskari Lemmela wrote: > AXP803 is compatible with AXP813. > Adding needed cells for AC and battery power supplies. > > AXP813 AC power supply cell added. > > Signed-off-by: Oskari Lemmela <oskari@lemmela.net> > --- > drivers/mfd/axp20x.c | 22 +++++++++++++++++++++- > include/linux/mfd/axp20x.h | 1 + > 2 files changed, 22 insertions(+), 1 deletion(-) > > diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c > index 0be511dd93d0..215f0b009728 100644 > --- a/drivers/mfd/axp20x.c > +++ b/drivers/mfd/axp20x.c > @@ -731,8 +731,23 @@ static const struct mfd_cell axp803_cells[] = { > .name = "axp221-pek", > .num_resources = ARRAY_SIZE(axp803_pek_resources), > .resources = axp803_pek_resources, > + }, { > + .name = "axp20x-regulator" > + }, { > + .name = "axp20x-gpio", > + .of_compatible = "x-powers,axp813-gpio", > + }, { > + .name = "axp813-adc", > + .of_compatible = "x-powers,axp813-adc", > + }, { > + .name = "axp20x-battery-power-supply", > + .of_compatible = "x-powers,axp813-battery-power-supply", > + }, { > + .name = "axp20x-ac-power-supply", > + .of_compatible = "x-powers,axp813-ac-power-supply", > + .num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), > + .resources = axp20x_ac_power_supply_resources, > }, > - { .name = "axp20x-regulator" }, > }; > > static const struct mfd_cell axp806_self_working_cells[] = { > @@ -778,6 +793,11 @@ static const struct mfd_cell axp813_cells[] = { > }, { > .name = "axp20x-battery-power-supply", > .of_compatible = "x-powers,axp813-battery-power-supply", > + }, { > + .name = "axp20x-ac-power-supply", > + .of_compatible = "x-powers,axp813-ac-power-supply", > + .num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), > + .resources = axp20x_ac_power_supply_resources, I'll let Maxime or Chen-Yu tell you what they want but I think we could have two different commits, one for AXP803 and one for AXP813. I don't think we care about having one commit per added resource for the axp803 though. > }, > }; > > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h > index 517e60eecbcb..2302b620d238 100644 > --- a/include/linux/mfd/axp20x.h > +++ b/include/linux/mfd/axp20x.h > @@ -266,6 +266,7 @@ enum axp20x_variants { > #define AXP288_RT_BATT_V_H 0xa0 > #define AXP288_RT_BATT_V_L 0xa1 > > +#define AXP813_ACIN_PATH_CTRL 0x3a You're not using it in this patch, please keep this change in the commit where its use is introduced. Thanks, Quentin -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181008/40abd802/attachment.sig>
next prev parent reply other threads:[~2018-10-08 7:33 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-04 19:34 [PATCH 0/4] AXP8x3 AC and battery power supply support Oskari Lemmela 2018-10-04 19:34 ` Oskari Lemmela 2018-10-04 19:34 ` Oskari Lemmela 2018-10-04 19:34 ` [PATCH 1/4] dt-bindings: add compatibles for AXP803 AC and battery power supplies Oskari Lemmela 2018-10-04 19:34 ` Oskari Lemmela 2018-10-04 19:34 ` Oskari Lemmela 2018-10-08 20:19 ` Jonathan Cameron 2018-10-08 20:19 ` Jonathan Cameron 2018-10-04 19:34 ` [PATCH 2/4] ARM: dtsi: axp81x: add AC power supply subnode Oskari Lemmela 2018-10-04 19:34 ` Oskari Lemmela 2018-10-04 19:34 ` Oskari Lemmela 2018-10-04 19:34 ` [PATCH 3/4] arm64: allwinner: a64: add battery and AC power supply support Oskari Lemmela 2018-10-04 19:34 ` Oskari Lemmela 2018-10-04 19:34 ` Oskari Lemmela 2018-10-04 19:34 ` [PATCH 4/4] power: supply: add AXP803/AXP813 AC and battery " Oskari Lemmela 2018-10-04 19:34 ` Oskari Lemmela 2018-10-04 19:34 ` Oskari Lemmela 2018-10-05 8:29 ` Quentin Schulz 2018-10-05 8:29 ` Quentin Schulz 2018-10-05 18:28 ` Oskari Lemmelä 2018-10-05 18:28 ` Oskari Lemmelä 2018-10-05 3:37 ` [PATCH 0/4] AXP8x3 " Chen-Yu Tsai 2018-10-05 3:37 ` Chen-Yu Tsai 2018-10-05 3:37 ` Chen-Yu Tsai 2018-10-06 21:18 ` [PATCH v2 0/6] " Oskari Lemmela 2018-10-06 21:18 ` Oskari Lemmela 2018-10-06 21:18 ` [PATCH v2 1/6] dt-bindings: power: supply: axp20x: add AXP813 AC power DT binding Oskari Lemmela 2018-10-06 21:18 ` Oskari Lemmela 2018-10-06 21:18 ` [PATCH v2 2/6] ARM: dts: axp81x: add AC power supply subnode Oskari Lemmela 2018-10-06 21:18 ` Oskari Lemmela 2018-10-08 7:27 ` Quentin Schulz 2018-10-08 7:27 ` Quentin Schulz 2018-10-06 21:18 ` [PATCH v2 3/6] arm64: dts: allwinner: axp803: add AC and battery power supplies Oskari Lemmela 2018-10-06 21:18 ` Oskari Lemmela 2018-10-08 7:28 ` Quentin Schulz 2018-10-08 7:28 ` Quentin Schulz 2018-10-06 21:18 ` [PATCH v2 4/6] arm64: dts: allwinner: a64: sopine: enable " Oskari Lemmela 2018-10-06 21:18 ` Oskari Lemmela 2018-10-06 21:18 ` [PATCH v2 5/6] mfd: axp20x: add support AXP803 AC and battery " Oskari Lemmela 2018-10-06 21:18 ` Oskari Lemmela 2018-10-08 7:33 ` Quentin Schulz [this message] 2018-10-08 7:33 ` Quentin Schulz 2018-10-06 21:18 ` [PATCH v2 6/6] power: supply: add AC power supply driver for AXP813 Oskari Lemmela 2018-10-06 21:18 ` Oskari Lemmela 2018-10-08 7:44 ` Quentin Schulz 2018-10-08 7:44 ` Quentin Schulz 2018-10-08 7:11 ` [PATCH v2 0/6] AXP8x3 AC and battery power supply support Quentin Schulz 2018-10-08 7:11 ` Quentin Schulz
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181008073312.otdz25ttvew6fzk2@qschulz \ --to=quentin.schulz@bootlin.com \ --cc=devicetree@vger.kernel.org \ --cc=lee.jones@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=maxime.ripard@bootlin.com \ --cc=oskari@lemmela.net \ --cc=quentin.schulz@free-electrons.com \ --cc=robh+dt@kernel.org \ --cc=sre@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.