From: Vasily Khoruzhick <anarsoul@gmail.com> To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Maxime Ripard <maxime.ripard@bootlin.com>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>, Marcus Cooper <codekipper@gmail.com>, Mylene JOSSERAND <mylene.josserand@free-electrons.com>, alsa-devel@alsa-project.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Jerome Brunet <jbrunet@baylibre.com> Cc: Vasily Khoruzhick <anarsoul@gmail.com> Subject: [PATCH v5 0/9] Add support for audiocodec in Allwinner A64 Date: Wed, 17 Oct 2018 00:38:04 -0700 [thread overview] Message-ID: <20181017073813.14127-1-anarsoul@gmail.com> (raw) This series adds Allwinner A64 audiocodec support into sun4i-i2s, sun8i-codec drivers, introduces new sun50i-codec-analog driver and enables sound on Pine64, SoPine boards and Pinebook. I2S for audiocodec in A64 is different from other 3 I2S modules but similar to one in A10, digital part of codec is compatible with A33 and analog controls part is completely different from other SoCs - it shares only few bits in few registers, so adding support for it into existing sun8i-codec-analog would mean duplicating all the widgets, controls and some routes and making it hard to read. Therefore it makes sense to introduce new driver. v2: - Use simple-amplifier for speaker amp on Pinebook - Rename sun50i-a64-i2s to sun50i-a64-codec-i2s to preserve compatible string for other 3 I2S modules in A64 in case if there's any incompatibility with H3 v3: - renamed sunxi-adda-pr-regmap to sun8i-adda-pr-regmap - use ilog2() to calculate reg value for LRCK div instead of using a table v4: - dts: don't use 'Mic' and 'Headset Mic' widgets from sun8i-codec, define our board-level widgets instead. v5: - collect all the tags - drop the change to sun8i_codec_clk_div Marcus Cooper (1): ASoC: sun4i-i2s: Add compatibility with A64 codec I2S Vasily Khoruzhick (8): ASoC: sun8i-codec: Don't hardcode BCLK / LRCK ratio ASoC: sun8i-codec-analog: split regmap code into separate driver ASoC: dt-binding: Add bindings for Allwinner A64 codec's analog path controls ASoC: sunxi: Add new driver for Allwinner A64 codec's analog path controls ASoC: sunxi: allow the sun8i-codec driver to be built on ARM64 arm64: dts: allwinner: a64: add nodes necessary for analog sound support arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine arm64: dts: allwinner: a64: enable sound on Pinebook .../devicetree/bindings/sound/sun4i-i2s.txt | 2 + .../bindings/sound/sun50i-codec-analog.txt | 12 + .../boot/dts/allwinner/sun50i-a64-pine64.dts | 29 ++ .../dts/allwinner/sun50i-a64-pinebook.dts | 42 ++ .../allwinner/sun50i-a64-sopine-baseboard.dts | 29 ++ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 58 +++ sound/soc/sunxi/Kconfig | 17 +- sound/soc/sunxi/Makefile | 2 + sound/soc/sunxi/sun4i-i2s.c | 21 + sound/soc/sunxi/sun50i-codec-analog.c | 444 ++++++++++++++++++ sound/soc/sunxi/sun8i-adda-pr-regmap.c | 102 ++++ sound/soc/sunxi/sun8i-adda-pr-regmap.h | 7 + sound/soc/sunxi/sun8i-codec-analog.c | 79 +--- sound/soc/sunxi/sun8i-codec.c | 22 +- 14 files changed, 785 insertions(+), 81 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt create mode 100644 sound/soc/sunxi/sun50i-codec-analog.c create mode 100644 sound/soc/sunxi/sun8i-adda-pr-regmap.c create mode 100644 sound/soc/sunxi/sun8i-adda-pr-regmap.h -- 2.19.0
WARNING: multiple messages have this Message-ID (diff)
From: anarsoul@gmail.com (Vasily Khoruzhick) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v5 0/9] Add support for audiocodec in Allwinner A64 Date: Wed, 17 Oct 2018 00:38:04 -0700 [thread overview] Message-ID: <20181017073813.14127-1-anarsoul@gmail.com> (raw) This series adds Allwinner A64 audiocodec support into sun4i-i2s, sun8i-codec drivers, introduces new sun50i-codec-analog driver and enables sound on Pine64, SoPine boards and Pinebook. I2S for audiocodec in A64 is different from other 3 I2S modules but similar to one in A10, digital part of codec is compatible with A33 and analog controls part is completely different from other SoCs - it shares only few bits in few registers, so adding support for it into existing sun8i-codec-analog would mean duplicating all the widgets, controls and some routes and making it hard to read. Therefore it makes sense to introduce new driver. v2: - Use simple-amplifier for speaker amp on Pinebook - Rename sun50i-a64-i2s to sun50i-a64-codec-i2s to preserve compatible string for other 3 I2S modules in A64 in case if there's any incompatibility with H3 v3: - renamed sunxi-adda-pr-regmap to sun8i-adda-pr-regmap - use ilog2() to calculate reg value for LRCK div instead of using a table v4: - dts: don't use 'Mic' and 'Headset Mic' widgets from sun8i-codec, define our board-level widgets instead. v5: - collect all the tags - drop the change to sun8i_codec_clk_div Marcus Cooper (1): ASoC: sun4i-i2s: Add compatibility with A64 codec I2S Vasily Khoruzhick (8): ASoC: sun8i-codec: Don't hardcode BCLK / LRCK ratio ASoC: sun8i-codec-analog: split regmap code into separate driver ASoC: dt-binding: Add bindings for Allwinner A64 codec's analog path controls ASoC: sunxi: Add new driver for Allwinner A64 codec's analog path controls ASoC: sunxi: allow the sun8i-codec driver to be built on ARM64 arm64: dts: allwinner: a64: add nodes necessary for analog sound support arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine arm64: dts: allwinner: a64: enable sound on Pinebook .../devicetree/bindings/sound/sun4i-i2s.txt | 2 + .../bindings/sound/sun50i-codec-analog.txt | 12 + .../boot/dts/allwinner/sun50i-a64-pine64.dts | 29 ++ .../dts/allwinner/sun50i-a64-pinebook.dts | 42 ++ .../allwinner/sun50i-a64-sopine-baseboard.dts | 29 ++ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 58 +++ sound/soc/sunxi/Kconfig | 17 +- sound/soc/sunxi/Makefile | 2 + sound/soc/sunxi/sun4i-i2s.c | 21 + sound/soc/sunxi/sun50i-codec-analog.c | 444 ++++++++++++++++++ sound/soc/sunxi/sun8i-adda-pr-regmap.c | 102 ++++ sound/soc/sunxi/sun8i-adda-pr-regmap.h | 7 + sound/soc/sunxi/sun8i-codec-analog.c | 79 +--- sound/soc/sunxi/sun8i-codec.c | 22 +- 14 files changed, 785 insertions(+), 81 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt create mode 100644 sound/soc/sunxi/sun50i-codec-analog.c create mode 100644 sound/soc/sunxi/sun8i-adda-pr-regmap.c create mode 100644 sound/soc/sunxi/sun8i-adda-pr-regmap.h -- 2.19.0
next reply other threads:[~2018-10-17 7:38 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-17 7:38 Vasily Khoruzhick [this message] 2018-10-17 7:38 ` [PATCH v5 0/9] Add support for audiocodec in Allwinner A64 Vasily Khoruzhick 2018-10-17 7:38 ` [PATCH v5 1/9] ASoC: sun4i-i2s: Add compatibility with A64 codec I2S Vasily Khoruzhick 2018-10-17 7:38 ` Vasily Khoruzhick 2018-10-17 7:38 ` [PATCH v5 2/9] ASoC: sun8i-codec: Don't hardcode BCLK / LRCK ratio Vasily Khoruzhick 2018-10-17 7:38 ` Vasily Khoruzhick 2018-10-17 8:38 ` Maxime Ripard 2018-10-17 8:38 ` Maxime Ripard 2018-10-17 11:53 ` Applied "ASoC: sun8i-codec: Don't hardcode BCLK / LRCK ratio" to the asoc tree Mark Brown 2018-10-17 11:53 ` Mark Brown 2018-10-17 7:38 ` [PATCH v5 3/9] ASoC: sun8i-codec-analog: split regmap code into separate driver Vasily Khoruzhick 2018-10-17 7:38 ` Vasily Khoruzhick 2018-10-17 7:38 ` [PATCH v5 4/9] ASoC: dt-binding: Add bindings for Allwinner A64 codec's analog path controls Vasily Khoruzhick 2018-10-17 7:38 ` Vasily Khoruzhick 2018-10-17 7:38 ` [PATCH v5 5/9] ASoC: sunxi: Add new driver " Vasily Khoruzhick 2018-10-17 7:38 ` Vasily Khoruzhick 2018-10-17 7:38 ` [PATCH v5 6/9] ASoC: sunxi: allow the sun8i-codec driver to be built on ARM64 Vasily Khoruzhick 2018-10-17 7:38 ` Vasily Khoruzhick 2018-10-17 7:38 ` [PATCH v5 7/9] arm64: dts: allwinner: a64: add nodes necessary for analog sound support Vasily Khoruzhick 2018-10-17 7:38 ` Vasily Khoruzhick 2018-10-17 7:38 ` [PATCH v5 8/9] arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine Vasily Khoruzhick 2018-10-17 7:38 ` Vasily Khoruzhick 2018-10-17 7:38 ` [PATCH v5 9/9] arm64: dts: allwinner: a64: enable sound on Pinebook Vasily Khoruzhick 2018-10-17 7:38 ` Vasily Khoruzhick
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181017073813.14127-1-anarsoul@gmail.com \ --to=anarsoul@gmail.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=codekipper@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=jbrunet@baylibre.com \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=maxime.ripard@bootlin.com \ --cc=mylene.josserand@free-electrons.com \ --cc=perex@perex.cz \ --cc=robh+dt@kernel.org \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.