All of lore.kernel.org
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	Imre Kaloz <kaloz@openwrt.org>,
	Krzysztof Halasa <khalasa@piap.pl>
Cc: devicetree@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
	Tim Harvey <tharvey@gateworks.com>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Olof Johansson <olof@lixom.net>,
	Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 13/17 v1] gpio: ixp4xx: Add DT bindings
Date: Sun,  3 Feb 2019 22:42:01 +0100	[thread overview]
Message-ID: <20190203214205.13594-14-linus.walleij@linaro.org> (raw)
In-Reply-To: <20190203214205.13594-1-linus.walleij@linaro.org>

This adds DT bindings for the IXP4xx GPIO controller.

Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Bartosz: looking for your ACK on this, it'd be good if
the other GPIO maintainer is aligned with my ideas here.
I intend to merge this through the ARM SoC tree.
---
 .../bindings/gpio/intel,ixp4xx-gpio.txt       | 38 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt

diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
new file mode 100644
index 000000000000..8dc41ed99685
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
@@ -0,0 +1,38 @@
+Intel IXP4xx XScale Networking Processors GPIO
+
+This GPIO controller is found in the Intel IXP4xx processors.
+It supports 16 GPIO lines.
+
+The interrupt portions of the GPIO controller is hierarchical:
+the synchronous edge detector is part of the GPIO block, but the
+actual enabling/disabling of the interrupt line is done in the
+main IXP4xx interrupt controller which has a 1:1 mapping for
+the first 12 GPIO lines to 12 system interrupts.
+
+The remaining 4 GPIO lines can not be used for receiving
+interrupts.
+
+The interrupt parent of this GPIO controller must be the
+IXP4xx interrupt controller.
+
+Required properties:
+
+- compatible : Should be
+  "intel,ixp4xx-gpio"
+- reg : Should contain registers location and length
+- gpio-controller : marks this as a GPIO controller
+- #gpio-cells : Should be 2, see gpio/gpio.txt
+- interrupt-controller : marks this as an interrupt controller
+- #interrupt-cells : a standard two-cell interrupt, see
+  interrupt-controller/interrupts.txt
+
+Example:
+
+gpio0: gpio@c8004000 {
+	compatible = "intel,ixp4xx-gpio";
+	reg = <0xc8004000 0x1000>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 775a623dc91d..57d098b85523 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1650,6 +1650,7 @@ M:	Imre Kaloz <kaloz@openwrt.org>
 M:	Krzysztof Halasa <khalasa@piap.pl>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
 F:	Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.txt
 F:	Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.txt
 F:	arch/arm/mach-ixp4xx/
-- 
2.20.1

WARNING: multiple messages have this Message-ID (diff)
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	Imre Kaloz <kaloz@openwrt.org>,
	Krzysztof Halasa <khalasa@piap.pl>
Cc: devicetree@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
	Tim Harvey <tharvey@gateworks.com>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Olof Johansson <olof@lixom.net>,
	Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 13/17 v1] gpio: ixp4xx: Add DT bindings
Date: Sun,  3 Feb 2019 22:42:01 +0100	[thread overview]
Message-ID: <20190203214205.13594-14-linus.walleij@linaro.org> (raw)
In-Reply-To: <20190203214205.13594-1-linus.walleij@linaro.org>

This adds DT bindings for the IXP4xx GPIO controller.

Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Bartosz: looking for your ACK on this, it'd be good if
the other GPIO maintainer is aligned with my ideas here.
I intend to merge this through the ARM SoC tree.
---
 .../bindings/gpio/intel,ixp4xx-gpio.txt       | 38 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt

diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
new file mode 100644
index 000000000000..8dc41ed99685
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
@@ -0,0 +1,38 @@
+Intel IXP4xx XScale Networking Processors GPIO
+
+This GPIO controller is found in the Intel IXP4xx processors.
+It supports 16 GPIO lines.
+
+The interrupt portions of the GPIO controller is hierarchical:
+the synchronous edge detector is part of the GPIO block, but the
+actual enabling/disabling of the interrupt line is done in the
+main IXP4xx interrupt controller which has a 1:1 mapping for
+the first 12 GPIO lines to 12 system interrupts.
+
+The remaining 4 GPIO lines can not be used for receiving
+interrupts.
+
+The interrupt parent of this GPIO controller must be the
+IXP4xx interrupt controller.
+
+Required properties:
+
+- compatible : Should be
+  "intel,ixp4xx-gpio"
+- reg : Should contain registers location and length
+- gpio-controller : marks this as a GPIO controller
+- #gpio-cells : Should be 2, see gpio/gpio.txt
+- interrupt-controller : marks this as an interrupt controller
+- #interrupt-cells : a standard two-cell interrupt, see
+  interrupt-controller/interrupts.txt
+
+Example:
+
+gpio0: gpio@c8004000 {
+	compatible = "intel,ixp4xx-gpio";
+	reg = <0xc8004000 0x1000>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 775a623dc91d..57d098b85523 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1650,6 +1650,7 @@ M:	Imre Kaloz <kaloz@openwrt.org>
 M:	Krzysztof Halasa <khalasa@piap.pl>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
 F:	Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.txt
 F:	Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.txt
 F:	arch/arm/mach-ixp4xx/
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-02-03 21:42 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-03 21:41 [PATCH 00/17 v1] ARM: ixp4xx: Modernize and DT support Linus Walleij
2019-02-03 21:41 ` [PATCH 01/17 v1] ARM: ixp4xx: Convert to MULTI_IRQ_HANDLER Linus Walleij
2019-02-03 21:41 ` [PATCH 02/17 v1] ARM: ixp4xx: Pass IRQ resource to beeper Linus Walleij
2019-02-03 21:41 ` [PATCH 03/17 v1] ARM: ixp4xx: Convert to SPARSE_IRQ Linus Walleij
2019-02-03 21:41 ` [PATCH 04/17 v1] irqchip: Add driver for IXP4xx Linus Walleij
2019-02-11 15:30   ` Marc Zyngier
2019-02-11 20:58     ` Linus Walleij
2019-02-11 22:11       ` Marc Zyngier
2019-02-18  7:06         ` Krzysztof Hałasa
2019-02-18  7:16           ` Linus Walleij
2019-02-18  7:35             ` Krzysztof Hałasa
2019-02-18  9:40             ` Arnd Bergmann
2019-02-18 12:03               ` Krzysztof Hałasa
2019-02-18 12:44                 ` Arnd Bergmann
2019-02-19  6:51                   ` Krzysztof Hałasa
2019-02-19  9:46                     ` Arnd Bergmann
2019-02-20  7:35                       ` Krzysztof Hałasa
2019-02-18  9:18         ` Arnd Bergmann
2019-02-03 21:41 ` [PATCH 05/17 v1] gpio: ixp4xx: Add driver for the IXP4xx GPIO Linus Walleij
2019-02-06 16:03   ` Bartosz Golaszewski
2019-02-21  8:50     ` Linus Walleij
2019-02-03 21:41 ` [PATCH 06/17 v1] ARM: ixp4xx: Switch to use new IRQ+GPIO drivers Linus Walleij
2019-02-03 21:41 ` [PATCH 07/17 v1] clocksource/drivers/ixp4xx: Add driver Linus Walleij
2019-02-03 21:41 ` [PATCH 08/17 v1] ARM: ixp4xx: Switch to use new timer driver Linus Walleij
2019-02-03 21:41 ` [PATCH 09/17 v1] irqchip: ixp4xx: Add DT bindings Linus Walleij
2019-02-03 21:41   ` Linus Walleij
2019-02-18 21:25   ` Rob Herring
2019-02-18 21:25     ` Rob Herring
2019-02-03 21:41 ` [PATCH 10/17 v1] irqchip: ixp4xx: Add OF initialization support Linus Walleij
2019-02-03 21:41 ` [PATCH 11/17 v1] clocksource/drivers/ixp4xx: Add DT bindings Linus Walleij
2019-02-03 21:41   ` Linus Walleij
2019-02-18 21:26   ` Rob Herring
2019-02-18 21:26     ` Rob Herring
2019-02-18 22:10     ` Daniel Lezcano
2019-02-03 21:42 ` [PATCH 12/17 v1] clocksource/drivers/ixp4xx: Add OF initialization support Linus Walleij
2019-02-11 11:26   ` Daniel Lezcano
2019-02-03 21:42 ` Linus Walleij [this message]
2019-02-03 21:42   ` [PATCH 13/17 v1] gpio: ixp4xx: Add DT bindings Linus Walleij
2019-02-06 16:05   ` Bartosz Golaszewski
2019-02-18 21:27   ` Rob Herring
2019-02-18 21:27     ` Rob Herring
2019-02-03 21:42 ` [PATCH 14/17 v1] gpio: ixp4xx: Add OF probing support Linus Walleij
2019-02-06 16:13   ` Bartosz Golaszewski
2019-02-21  8:55     ` Linus Walleij
2019-02-03 21:42 ` [PATCH 15/17 v1] ARM: ixp4xx: Add DT bindings Linus Walleij
2019-02-03 21:42   ` Linus Walleij
2019-02-04 15:16   ` Rob Herring
2019-02-04 15:16     ` Rob Herring
2019-02-08 19:37     ` Linus Walleij
2019-02-08 19:37       ` Linus Walleij
2019-02-03 21:42 ` [PATCH 16/17 v1] ARM: ixp4xx: Add device tree boot support Linus Walleij
2019-02-03 21:42 ` [PATCH 17/17 v1] RFC: ARM: dts: Add some initial IXP4xx device trees Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190203214205.13594-14-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=arnd@arndb.de \
    --cc=bgolaszewski@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kaloz@openwrt.org \
    --cc=khalasa@piap.pl \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=olof@lixom.net \
    --cc=tharvey@gateworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.