All of lore.kernel.org
 help / color / mirror / Atom feed
From: Petr Mladek <pmladek@suse.com>
To: John Ogness <john.ogness@linutronix.de>
Cc: linux-kernel@vger.kernel.org,
	Peter Zijlstra <peterz@infradead.org>,
	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>,
	Steven Rostedt <rostedt@goodmis.org>,
	Daniel Wang <wonderfly@google.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Alan Cox <gnomes@lxorguk.ukuu.org.uk>,
	Jiri Slaby <jslaby@suse.com>, Peter Feiner <pfeiner@google.com>,
	linux-serial@vger.kernel.org,
	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Subject: Re: [RFC PATCH v1 04/25] printk-rb: add writer interface
Date: Thu, 21 Feb 2019 14:51:40 +0100	[thread overview]
Message-ID: <20190221135140.enamunz6p54dt443@pathway.suse.cz> (raw)
In-Reply-To: <87d0nr5heh.fsf@linutronix.de>

On Sun 2019-02-17 02:32:22, John Ogness wrote:
> Hi Petr,
> 
> I've made changes to the patch that hopefully align with what you are
> looking for. I would appreciate it if you could go over it and see if
> the changes are in the right direction. And if so, you should decide
> whether I should make these kinds of changes for the whole series and
> submit a v2 before you continue with the review.
> 
> The list of changes:
> 
> - Added comments everywhere I think they could be useful. Is it too
>   much?

Some comments probably can get shortened. But I personally find
them really helpful.

I am not going to do a detailed review of this variant at the moment.
I would like to finish the review of the entire patchset first.

> - I tried moving calc_next() into prb_reserve(), but it was pure
>   insanity. I played with refactoring for a while until I found
>   something that I think looks nice. I moved the implementation of
>   calc_next() along with its containing loop into a new function
>   find_res_ptrs(). This function does what calc_next() and push_tail()
>   did. With this solution, I think prb_reserve() looks pretty
>   clean. However, the optimization of communicating about the wrap is
>   gone. So even though find_res_ptrs() knew if a wrap occurred,
>   prb_reserve() figures it out again for itself. If we want the
>   optimization, I still think the best approach is the -1,0,1 return
>   value of find_res_ptrs().

I still have to go more deeply into it. Anyway, the new code looks
much better than the previous one.

Best Regards,
Petr

  reply	other threads:[~2019-02-21 13:51 UTC|newest]

Thread overview: 149+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-12 14:29 [RFC PATCH v1 00/25] printk: new implementation John Ogness
2019-02-12 14:29 ` [RFC PATCH v1 01/25] printk-rb: add printk ring buffer documentation John Ogness
2019-02-12 14:45   ` Greg Kroah-Hartman
2019-02-12 14:29 ` [RFC PATCH v1 02/25] printk-rb: add prb locking functions John Ogness
2019-02-13 15:45   ` Petr Mladek
2019-02-13 21:39     ` John Ogness
2019-02-14 10:33       ` Petr Mladek
2019-02-14 12:10         ` John Ogness
2019-02-15 10:26           ` Petr Mladek
2019-02-15 10:56             ` John Ogness
2019-03-07  2:12   ` Sergey Senozhatsky
2019-02-12 14:29 ` [RFC PATCH v1 03/25] printk-rb: define ring buffer struct and initializer John Ogness
2019-02-12 14:46   ` Greg Kroah-Hartman
2019-02-14 12:46     ` Petr Mladek
2019-02-12 14:29 ` [RFC PATCH v1 04/25] printk-rb: add writer interface John Ogness
2019-02-14 15:16   ` Petr Mladek
2019-02-14 23:36     ` John Ogness
2019-02-15  1:19       ` John Ogness
2019-02-15 13:47       ` Petr Mladek
2019-02-17  1:32         ` John Ogness
2019-02-21 13:51           ` Petr Mladek [this message]
2019-02-12 14:29 ` [RFC PATCH v1 05/25] printk-rb: add basic non-blocking reading interface John Ogness
2019-02-18 12:54   ` Petr Mladek
2019-02-19 21:44     ` John Ogness
2019-02-21 16:22       ` Petr Mladek
2019-02-12 14:29 ` [RFC PATCH v1 06/25] printk-rb: add blocking reader support John Ogness
2019-02-18 14:05   ` Petr Mladek
2019-02-19 21:47     ` John Ogness
2019-02-12 14:29 ` [RFC PATCH v1 07/25] printk-rb: add functionality required by printk John Ogness
2019-02-12 17:15   ` Linus Torvalds
2019-02-13  9:20     ` John Ogness
2019-02-18 15:59   ` Petr Mladek
2019-02-19 22:08     ` John Ogness
2019-02-22  9:58       ` Petr Mladek
2019-02-12 14:29 ` [RFC PATCH v1 08/25] printk: add ring buffer and kthread John Ogness
2019-02-12 15:47   ` Sergey Senozhatsky
2019-02-19 13:54   ` Petr Mladek
2019-03-04  7:38   ` Sergey Senozhatsky
2019-03-04 10:00     ` Sergey Senozhatsky
2019-03-04 11:07       ` Sergey Senozhatsky
2019-03-05 21:00         ` John Ogness
2019-03-06 15:57           ` Petr Mladek
2019-03-06 21:17             ` John Ogness
2019-03-06 22:22               ` John Ogness
2019-03-07  6:41                 ` Sergey Senozhatsky
2019-03-07  6:51                   ` Sergey Senozhatsky
2019-03-07 12:50               ` Petr Mladek
2019-03-07  5:15           ` Sergey Senozhatsky
2019-03-11 10:51             ` John Ogness
2019-03-12  9:58               ` Sergey Senozhatsky
2019-03-12 10:30               ` Petr Mladek
2019-03-07 12:06     ` John Ogness
2019-03-08  1:31       ` Sergey Senozhatsky
2019-03-08 10:04         ` Petr Mladek
2019-02-12 14:29 ` [RFC PATCH v1 09/25] printk: remove exclusive console hack John Ogness
2019-02-19 14:03   ` Petr Mladek
2019-02-12 14:29 ` [RFC PATCH v1 10/25] printk: redirect emit/store to new ringbuffer John Ogness
2019-02-20  9:01   ` Petr Mladek
2019-02-20 21:25     ` John Ogness
2019-02-22 14:43       ` Petr Mladek
2019-02-22 15:06         ` John Ogness
2019-02-22 15:25           ` Petr Mladek
2019-02-25 12:11       ` Petr Mladek
2019-02-25 16:41         ` John Ogness
2019-02-26  9:45           ` Petr Mladek
2019-02-12 14:29 ` [RFC PATCH v1 11/25] printk_safe: remove printk safe code John Ogness
2019-02-22 10:37   ` Petr Mladek
2019-02-22 10:37     ` Petr Mladek
2019-02-22 13:38     ` John Ogness
2019-02-22 15:15       ` Petr Mladek
2019-02-12 14:29 ` [RFC PATCH v1 12/25] printk: minimize console locking implementation John Ogness
2019-02-25 13:44   ` Petr Mladek
2019-02-12 14:29 ` [RFC PATCH v1 13/25] printk: track seq per console John Ogness
2019-02-25 14:59   ` Petr Mladek
2019-02-26  8:45     ` John Ogness
2019-02-26 13:11       ` Petr Mladek
2019-02-12 14:29 ` [RFC PATCH v1 14/25] printk: do boot_delay_msec inside printk_delay John Ogness
2019-02-12 14:29 ` [RFC PATCH v1 15/25] printk: print history for new consoles John Ogness
2019-02-26 14:58   ` Petr Mladek
2019-02-26 15:22     ` John Ogness
2019-02-27  9:02       ` Petr Mladek
2019-02-27 10:02         ` John Ogness
2019-02-27 13:12           ` Petr Mladek
2019-03-04  9:24       ` Sergey Senozhatsky
2019-02-12 14:29 ` [RFC PATCH v1 16/25] printk: implement CON_PRINTBUFFER John Ogness
2019-02-26 15:38   ` Petr Mladek
2019-02-12 14:29 ` [RFC PATCH v1 17/25] printk: add processor number to output John Ogness
2019-02-13 22:29   ` John Ogness
2019-02-12 14:29 ` [RFC PATCH v1 18/25] console: add write_atomic interface John Ogness
2019-02-12 14:29 ` [RFC PATCH v1 19/25] printk: introduce emergency messages John Ogness
2019-03-07  7:30   ` Sergey Senozhatsky
2019-03-08 10:31     ` Petr Mladek
2019-03-11 12:04       ` John Ogness
2019-03-12  2:51         ` Sergey Senozhatsky
2019-03-12  2:58       ` Sergey Senozhatsky
2019-02-12 14:29 ` [RFC PATCH v1 20/25] serial: 8250: implement write_atomic John Ogness
2019-02-27  9:46   ` Petr Mladek
2019-02-27 10:32     ` John Ogness
2019-02-27 13:55       ` Petr Mladek
2019-03-08  4:05         ` John Ogness
2019-03-08  4:17           ` John Ogness
2019-03-08 10:28           ` Petr Mladek
2019-02-12 14:29 ` [RFC PATCH v1 21/25] printk: implement KERN_CONT John Ogness
2019-02-12 14:30 ` [RFC PATCH v1 22/25] printk: implement /dev/kmsg John Ogness
2019-02-12 14:30 ` [RFC PATCH v1 23/25] printk: implement syslog John Ogness
2019-02-12 14:30 ` [RFC PATCH v1 24/25] printk: implement kmsg_dump John Ogness
2019-02-12 14:30 ` [RFC PATCH v1 25/25] printk: remove unused code John Ogness
2019-03-08 14:02   ` Sebastian Andrzej Siewior
2019-03-11  2:46     ` Sergey Senozhatsky
2019-03-11  8:18       ` Sebastian Andrzej Siewior
2019-03-12  9:38         ` Petr Mladek
2019-02-13  1:31 ` [RFC PATCH v1 00/25] printk: new implementation Sergey Senozhatsky
2019-02-13 13:43   ` John Ogness
2019-03-04  6:39     ` Sergey Senozhatsky
2019-02-13  1:41 ` Sergey Senozhatsky
2019-02-13 14:15   ` John Ogness
2019-03-04  5:31     ` Sergey Senozhatsky
2019-02-13  2:55 ` Sergey Senozhatsky
2019-02-13 14:43   ` John Ogness
2019-03-04  5:23     ` Sergey Senozhatsky
2019-03-07  9:53       ` John Ogness
2019-03-08 10:00         ` Petr Mladek
2019-03-11 10:54         ` Sergey Senozhatsky
2019-03-12 12:38           ` Petr Mladek
2019-03-12 15:15             ` John Ogness
2019-03-13  2:15               ` Sergey Senozhatsky
2019-03-13  8:19                 ` John Ogness
2019-03-13  8:40                   ` Sebastian Siewior
2019-03-13  9:27                     ` Sergey Senozhatsky
2019-03-13 10:06                       ` Sergey Senozhatsky
2019-03-14  9:27                       ` Petr Mladek
2019-03-13  8:46                   ` Sergey Senozhatsky
2019-03-14  9:14               ` Petr Mladek
2019-03-14  9:35                 ` John Ogness
2019-03-13  2:00             ` Sergey Senozhatsky
2019-02-13 16:54 ` David Laight
2019-02-13 22:20   ` John Ogness
2019-02-13 22:20     ` John Ogness
2020-01-20 23:05 ` Eugeniu Rosca
2020-01-21 23:56   ` John Ogness
2020-01-22  2:34     ` Eugeniu Rosca
2020-01-22  7:31       ` Geert Uytterhoeven
2020-01-22 16:58         ` Eugeniu Rosca
2020-01-22 19:48           ` Geert Uytterhoeven
2020-01-24 16:09             ` Eugeniu Rosca
2020-01-27 12:32               ` Petr Mladek
2020-01-27 13:45                 ` Eugeniu Rosca
2020-01-22 10:33       ` John Ogness
2020-01-24 12:13         ` Eugeniu Rosca

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190221135140.enamunz6p54dt443@pathway.suse.cz \
    --to=pmladek@suse.com \
    --cc=akpm@linux-foundation.org \
    --cc=gnomes@lxorguk.ukuu.org.uk \
    --cc=gregkh@linuxfoundation.org \
    --cc=john.ogness@linutronix.de \
    --cc=jslaby@suse.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=pfeiner@google.com \
    --cc=rostedt@goodmis.org \
    --cc=sergey.senozhatsky.work@gmail.com \
    --cc=sergey.senozhatsky@gmail.com \
    --cc=torvalds@linux-foundation.org \
    --cc=wonderfly@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.