From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: narmstrong@baylibre.com, jbrunet@baylibre.com,
robh+dt@kernel.org, mark.rutland@arm.com,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
khilman@baylibre.com
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH 0/5] provide the XTAL clock via OF on Meson8/8b/8m2
Date: Sat, 21 Sep 2019 17:12:18 +0200 [thread overview]
Message-ID: <20190921151223.768842-1-martin.blumenstingl@googlemail.com> (raw)
So far the HHI clock controller has been providing the XTAL clock on
Amlogic Meson8/Meson8b/Meson8m2 SoCs.
This is not correct because the XTAL is actually a crystal on the
boards and the SoC has a dedicated input for it.
This updates the dt-bindings of the HHI clock controller and defines
a fixed-clock in meson.dtsi (along with switching everything over to
use this clock).
The clock driver needs three updates to use this:
- patch #2 uses clk_hw_set_parent in the CPU clock notifier. This drops
the explicit reference to CLKID_XTAL while at the same time making
the code much easier (thanks to Neil for providing this new method
as part of the G12A CPU clock bringup!)
- patch #3 ensures that the clock driver doesn't rely on it's internal
XTAL clock while not losing support for older .dtbs that don't have
the XTAL clock input yet
- with patch #4 the clock controller's own XTAL clock is not registered
anymore when a clock input is provided via OF
This series is a functional no-op. It's main goal is to better represent
how the actual hardware looks like.
Martin Blumenstingl (5):
dt-bindings: clock: meson8b: add the clock inputs
clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier
clk: meson: meson8b: change references to the XTAL clock to use the
name
clk: meson: meson8b: don't register the XTAL clock when provided via
OF
ARM: dts: meson: provide the XTAL clock using a fixed-clock
.../bindings/clock/amlogic,meson8b-clkc.txt | 5 +
arch/arm/boot/dts/meson.dtsi | 7 ++
arch/arm/boot/dts/meson6.dtsi | 7 --
arch/arm/boot/dts/meson8.dtsi | 15 +--
arch/arm/boot/dts/meson8b-ec100.dts | 2 +-
arch/arm/boot/dts/meson8b-mxq.dts | 2 +-
arch/arm/boot/dts/meson8b-odroidc1.dts | 2 +-
arch/arm/boot/dts/meson8b.dtsi | 15 +--
drivers/clk/meson/meson8b.c | 106 +++++++++---------
9 files changed, 87 insertions(+), 74 deletions(-)
--
2.23.0
WARNING: multiple messages have this Message-ID (diff)
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: narmstrong@baylibre.com, jbrunet@baylibre.com,
robh+dt@kernel.org, mark.rutland@arm.com,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
khilman@baylibre.com
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org
Subject: [PATCH 0/5] provide the XTAL clock via OF on Meson8/8b/8m2
Date: Sat, 21 Sep 2019 17:12:18 +0200 [thread overview]
Message-ID: <20190921151223.768842-1-martin.blumenstingl@googlemail.com> (raw)
So far the HHI clock controller has been providing the XTAL clock on
Amlogic Meson8/Meson8b/Meson8m2 SoCs.
This is not correct because the XTAL is actually a crystal on the
boards and the SoC has a dedicated input for it.
This updates the dt-bindings of the HHI clock controller and defines
a fixed-clock in meson.dtsi (along with switching everything over to
use this clock).
The clock driver needs three updates to use this:
- patch #2 uses clk_hw_set_parent in the CPU clock notifier. This drops
the explicit reference to CLKID_XTAL while at the same time making
the code much easier (thanks to Neil for providing this new method
as part of the G12A CPU clock bringup!)
- patch #3 ensures that the clock driver doesn't rely on it's internal
XTAL clock while not losing support for older .dtbs that don't have
the XTAL clock input yet
- with patch #4 the clock controller's own XTAL clock is not registered
anymore when a clock input is provided via OF
This series is a functional no-op. It's main goal is to better represent
how the actual hardware looks like.
Martin Blumenstingl (5):
dt-bindings: clock: meson8b: add the clock inputs
clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier
clk: meson: meson8b: change references to the XTAL clock to use the
name
clk: meson: meson8b: don't register the XTAL clock when provided via
OF
ARM: dts: meson: provide the XTAL clock using a fixed-clock
.../bindings/clock/amlogic,meson8b-clkc.txt | 5 +
arch/arm/boot/dts/meson.dtsi | 7 ++
arch/arm/boot/dts/meson6.dtsi | 7 --
arch/arm/boot/dts/meson8.dtsi | 15 +--
arch/arm/boot/dts/meson8b-ec100.dts | 2 +-
arch/arm/boot/dts/meson8b-mxq.dts | 2 +-
arch/arm/boot/dts/meson8b-odroidc1.dts | 2 +-
arch/arm/boot/dts/meson8b.dtsi | 15 +--
drivers/clk/meson/meson8b.c | 106 +++++++++---------
9 files changed, 87 insertions(+), 74 deletions(-)
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: narmstrong@baylibre.com, jbrunet@baylibre.com,
robh+dt@kernel.org, mark.rutland@arm.com,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
khilman@baylibre.com
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org
Subject: [PATCH 0/5] provide the XTAL clock via OF on Meson8/8b/8m2
Date: Sat, 21 Sep 2019 17:12:18 +0200 [thread overview]
Message-ID: <20190921151223.768842-1-martin.blumenstingl@googlemail.com> (raw)
So far the HHI clock controller has been providing the XTAL clock on
Amlogic Meson8/Meson8b/Meson8m2 SoCs.
This is not correct because the XTAL is actually a crystal on the
boards and the SoC has a dedicated input for it.
This updates the dt-bindings of the HHI clock controller and defines
a fixed-clock in meson.dtsi (along with switching everything over to
use this clock).
The clock driver needs three updates to use this:
- patch #2 uses clk_hw_set_parent in the CPU clock notifier. This drops
the explicit reference to CLKID_XTAL while at the same time making
the code much easier (thanks to Neil for providing this new method
as part of the G12A CPU clock bringup!)
- patch #3 ensures that the clock driver doesn't rely on it's internal
XTAL clock while not losing support for older .dtbs that don't have
the XTAL clock input yet
- with patch #4 the clock controller's own XTAL clock is not registered
anymore when a clock input is provided via OF
This series is a functional no-op. It's main goal is to better represent
how the actual hardware looks like.
Martin Blumenstingl (5):
dt-bindings: clock: meson8b: add the clock inputs
clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier
clk: meson: meson8b: change references to the XTAL clock to use the
name
clk: meson: meson8b: don't register the XTAL clock when provided via
OF
ARM: dts: meson: provide the XTAL clock using a fixed-clock
.../bindings/clock/amlogic,meson8b-clkc.txt | 5 +
arch/arm/boot/dts/meson.dtsi | 7 ++
arch/arm/boot/dts/meson6.dtsi | 7 --
arch/arm/boot/dts/meson8.dtsi | 15 +--
arch/arm/boot/dts/meson8b-ec100.dts | 2 +-
arch/arm/boot/dts/meson8b-mxq.dts | 2 +-
arch/arm/boot/dts/meson8b-odroidc1.dts | 2 +-
arch/arm/boot/dts/meson8b.dtsi | 15 +--
drivers/clk/meson/meson8b.c | 106 +++++++++---------
9 files changed, 87 insertions(+), 74 deletions(-)
--
2.23.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2019-09-21 15:12 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-21 15:12 Martin Blumenstingl [this message]
2019-09-21 15:12 ` [PATCH 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-09-21 15:12 ` [PATCH 1/5] dt-bindings: clock: meson8b: add the clock inputs Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-10-02 14:19 ` Rob Herring
2019-10-02 14:19 ` Rob Herring
2019-10-02 14:19 ` Rob Herring
2019-10-02 14:19 ` Rob Herring
2019-09-21 15:12 ` [PATCH 2/5] clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-09-21 15:12 ` [PATCH 3/5] clk: meson: meson8b: change references to the XTAL clock to use the name Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-09-21 15:12 ` [PATCH 4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-09-23 9:31 ` Jerome Brunet
2019-09-23 9:31 ` Jerome Brunet
2019-09-23 9:31 ` Jerome Brunet
2019-09-23 9:31 ` Jerome Brunet
2019-09-23 20:57 ` Martin Blumenstingl
2019-09-23 20:57 ` Martin Blumenstingl
2019-09-23 20:57 ` Martin Blumenstingl
2019-09-21 15:12 ` [PATCH 5/5] ARM: dts: meson: provide the XTAL clock using a fixed-clock Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-09-23 9:29 ` [PATCH 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Jerome Brunet
2019-09-23 9:29 ` Jerome Brunet
2019-09-23 9:29 ` Jerome Brunet
2019-09-23 9:29 ` Jerome Brunet
2019-09-23 20:56 ` Martin Blumenstingl
2019-09-23 20:56 ` Martin Blumenstingl
2019-09-23 20:56 ` Martin Blumenstingl
2019-09-25 22:47 ` Kevin Hilman
2019-09-25 22:47 ` Kevin Hilman
2019-09-25 22:47 ` Kevin Hilman
2019-09-26 18:34 ` Martin Blumenstingl
2019-09-26 18:34 ` Martin Blumenstingl
2019-09-26 18:34 ` Martin Blumenstingl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190921151223.768842-1-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.