All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org, tiwai@suse.de, broonie@kernel.org,
	vkoul@kernel.org, gregkh@linuxfoundation.org, jank@cadence.com,
	srinivas.kandagatla@linaro.org, slawomir.blauciak@intel.com,
	Bard liao <yung-chuan.liao@linux.intel.com>,
	Rander Wang <rander.wang@linux.intel.com>,
	Ranjani Sridharan <ranjani.sridharan@linux.intel.com>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	Sanyog Kale <sanyog.r.kale@intel.com>
Subject: [PATCH v2 07/19] soundwire: intel: add pm_runtime support
Date: Wed,  6 Nov 2019 13:22:11 -0600	[thread overview]
Message-ID: <20191106192223.6003-8-pierre-louis.bossart@linux.intel.com> (raw)
In-Reply-To: <20191106192223.6003-1-pierre-louis.bossart@linux.intel.com>

Add basic hooks in DAI .startup and .shutdown callbacks.

The SoundWire IP should be powered between those two calls. The power
dependencies between SoundWire and DSP are handled with the
parent/child relationship, before the SoundWire master device becomes
active the parent device will become active and power-up the shared
rails.

For now the strategy is to rely on complete enumeration when the
device becomes active, so the code is a copy/paste of the sequence for
system suspend/resume. In future patches, the strategy will optionally
be to rely on clock stop if the enumeration time is prohibitive or
when the devices connected to a link can signal a wake.

A module parameter is added to make integration of new Slave devices
easier, to e.g. keep the device active or prevent clock-stop.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 drivers/soundwire/intel.c | 108 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 104 insertions(+), 4 deletions(-)

diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index aeef0c0fc443..650581348732 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
@@ -21,6 +22,20 @@
 #include "bus.h"
 #include "intel.h"
 
+/*
+ * debug/config flags for the Intel SoundWire Master.
+ *
+ * Since we may have multiple masters active, we can have up to 8
+ * flags reused in each byte, with master0 using the ls-byte, etc.
+ */
+
+#define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME BIT(0)
+#define SDW_INTEL_MASTER_DISABLE_CLOCK_STOP BIT(1)
+
+static int md_flags;
+module_param_named(sdw_md_flags, md_flags, int, 0444);
+MODULE_PARM_DESC(sdw_md_flags, "SoundWire Intel Master device flags (0x0 all off)");
+
 /* Intel SHIM Registers Definition */
 #define SDW_SHIM_LCAP			0x0
 #define SDW_SHIM_LCTL			0x4
@@ -742,10 +757,16 @@ static int sdw_stream_setup(struct snd_pcm_substream *substream,
 static int intel_startup(struct snd_pcm_substream *substream,
 			 struct snd_soc_dai *dai)
 {
-	/*
-	 * TODO: add pm_runtime support here, the startup callback
-	 * will make sure the IP is 'active'
-	 */
+	struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
+	int ret;
+
+	ret = pm_runtime_get_sync(cdns->dev);
+	if (ret < 0 && ret != -EACCES) {
+		dev_err_ratelimited(cdns->dev,
+				    "pm_runtime_get_sync failed in %s, ret %d\n",
+				    __func__, ret);
+		pm_runtime_put_noidle(cdns->dev);
+	}
 
 	return sdw_stream_setup(substream, dai);
 }
@@ -924,6 +945,7 @@ static void intel_shutdown(struct snd_pcm_substream *substream,
 			   struct snd_soc_dai *dai)
 {
 	struct sdw_cdns_dma_data *dma;
+	struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
 
 	dma = snd_soc_dai_get_dma_data(dai, substream);
 	if (!dma)
@@ -931,6 +953,9 @@ static void intel_shutdown(struct snd_pcm_substream *substream,
 
 	snd_soc_dai_set_dma_data(dai, substream, NULL);
 	kfree(dma);
+
+	pm_runtime_mark_last_busy(cdns->dev);
+	pm_runtime_put_autosuspend(cdns->dev);
 }
 
 static int intel_pcm_set_sdw_stream(struct snd_soc_dai *dai,
@@ -1180,6 +1205,7 @@ static int intel_master_startup(struct sdw_master_device *md)
 {
 	struct sdw_cdns_stream_config config;
 	struct sdw_intel *sdw;
+	int link_flags;
 	int ret;
 
 	sdw = md->pdata;
@@ -1225,6 +1251,17 @@ static int intel_master_startup(struct sdw_master_device *md)
 
 	intel_debugfs_init(sdw);
 
+	/* Enable runtime PM */
+	link_flags = md_flags >> (sdw->cdns.bus.link_id * 8);
+	if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME)) {
+		pm_runtime_set_autosuspend_delay(&md->dev, 3000);
+		pm_runtime_use_autosuspend(&md->dev);
+		pm_runtime_mark_last_busy(&md->dev);
+
+		pm_runtime_set_active(&md->dev);
+		pm_runtime_enable(&md->dev);
+	}
+
 	return 0;
 
 err_interrupt:
@@ -1288,6 +1325,35 @@ static int intel_suspend(struct device *dev)
 	return 0;
 }
 
+static int intel_suspend_runtime(struct device *dev)
+{
+	struct sdw_cdns *cdns = dev_get_drvdata(dev);
+	struct sdw_intel *sdw = cdns_to_intel(cdns);
+	int ret;
+
+	if (cdns->bus.prop.hw_disabled) {
+		dev_dbg(dev, "SoundWire master %d is disabled, ignoring\n",
+			cdns->bus.link_id);
+		return 0;
+	}
+
+	ret = sdw_cdns_enable_interrupt(cdns, false);
+	if (ret < 0) {
+		dev_err(dev, "cannot disable interrupts on suspend\n");
+		return ret;
+	}
+
+	ret = intel_link_power_down(sdw);
+	if (ret) {
+		dev_err(dev, "Link power down failed: %d", ret);
+		return ret;
+	}
+
+	intel_shim_wake(sdw, false);
+
+	return 0;
+}
+
 static int intel_resume(struct device *dev)
 {
 	struct sdw_cdns *cdns = dev_get_drvdata(dev);
@@ -1321,10 +1387,44 @@ static int intel_resume(struct device *dev)
 	return ret;
 }
 
+static int intel_resume_runtime(struct device *dev)
+{
+	struct sdw_cdns *cdns = dev_get_drvdata(dev);
+	struct sdw_intel *sdw = cdns_to_intel(cdns);
+	int ret;
+
+	if (cdns->bus.prop.hw_disabled) {
+		dev_dbg(dev, "SoundWire master %d is disabled, ignoring\n",
+			cdns->bus.link_id);
+		return 0;
+	}
+
+	ret = intel_init(sdw);
+	if (ret) {
+		dev_err(dev, "%s failed: %d", __func__, ret);
+		return ret;
+	}
+
+	ret = sdw_cdns_enable_interrupt(cdns, true);
+	if (ret < 0) {
+		dev_err(dev, "cannot enable interrupts during resume\n");
+		return ret;
+	}
+
+	ret = sdw_cdns_exit_reset(cdns);
+	if (ret < 0) {
+		dev_err(dev, "unable to exit bus reset sequence during resume\n");
+		return ret;
+	}
+
+	return ret;
+}
+
 #endif
 
 static const struct dev_pm_ops intel_pm = {
 	SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume)
+	SET_RUNTIME_PM_OPS(intel_suspend_runtime, intel_resume_runtime, NULL)
 };
 
 struct sdw_md_driver intel_sdw_driver = {
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	tiwai@suse.de, gregkh@linuxfoundation.org,
	linux-kernel@vger.kernel.org,
	Ranjani Sridharan <ranjani.sridharan@linux.intel.com>,
	vkoul@kernel.org, broonie@kernel.org,
	srinivas.kandagatla@linaro.org, jank@cadence.com,
	slawomir.blauciak@intel.com,
	Sanyog Kale <sanyog.r.kale@intel.com>,
	Bard liao <yung-chuan.liao@linux.intel.com>,
	Rander Wang <rander.wang@linux.intel.com>
Subject: [alsa-devel] [PATCH v2 07/19] soundwire: intel: add pm_runtime support
Date: Wed,  6 Nov 2019 13:22:11 -0600	[thread overview]
Message-ID: <20191106192223.6003-8-pierre-louis.bossart@linux.intel.com> (raw)
In-Reply-To: <20191106192223.6003-1-pierre-louis.bossart@linux.intel.com>

Add basic hooks in DAI .startup and .shutdown callbacks.

The SoundWire IP should be powered between those two calls. The power
dependencies between SoundWire and DSP are handled with the
parent/child relationship, before the SoundWire master device becomes
active the parent device will become active and power-up the shared
rails.

For now the strategy is to rely on complete enumeration when the
device becomes active, so the code is a copy/paste of the sequence for
system suspend/resume. In future patches, the strategy will optionally
be to rely on clock stop if the enumeration time is prohibitive or
when the devices connected to a link can signal a wake.

A module parameter is added to make integration of new Slave devices
easier, to e.g. keep the device active or prevent clock-stop.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 drivers/soundwire/intel.c | 108 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 104 insertions(+), 4 deletions(-)

diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index aeef0c0fc443..650581348732 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
@@ -21,6 +22,20 @@
 #include "bus.h"
 #include "intel.h"
 
+/*
+ * debug/config flags for the Intel SoundWire Master.
+ *
+ * Since we may have multiple masters active, we can have up to 8
+ * flags reused in each byte, with master0 using the ls-byte, etc.
+ */
+
+#define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME BIT(0)
+#define SDW_INTEL_MASTER_DISABLE_CLOCK_STOP BIT(1)
+
+static int md_flags;
+module_param_named(sdw_md_flags, md_flags, int, 0444);
+MODULE_PARM_DESC(sdw_md_flags, "SoundWire Intel Master device flags (0x0 all off)");
+
 /* Intel SHIM Registers Definition */
 #define SDW_SHIM_LCAP			0x0
 #define SDW_SHIM_LCTL			0x4
@@ -742,10 +757,16 @@ static int sdw_stream_setup(struct snd_pcm_substream *substream,
 static int intel_startup(struct snd_pcm_substream *substream,
 			 struct snd_soc_dai *dai)
 {
-	/*
-	 * TODO: add pm_runtime support here, the startup callback
-	 * will make sure the IP is 'active'
-	 */
+	struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
+	int ret;
+
+	ret = pm_runtime_get_sync(cdns->dev);
+	if (ret < 0 && ret != -EACCES) {
+		dev_err_ratelimited(cdns->dev,
+				    "pm_runtime_get_sync failed in %s, ret %d\n",
+				    __func__, ret);
+		pm_runtime_put_noidle(cdns->dev);
+	}
 
 	return sdw_stream_setup(substream, dai);
 }
@@ -924,6 +945,7 @@ static void intel_shutdown(struct snd_pcm_substream *substream,
 			   struct snd_soc_dai *dai)
 {
 	struct sdw_cdns_dma_data *dma;
+	struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
 
 	dma = snd_soc_dai_get_dma_data(dai, substream);
 	if (!dma)
@@ -931,6 +953,9 @@ static void intel_shutdown(struct snd_pcm_substream *substream,
 
 	snd_soc_dai_set_dma_data(dai, substream, NULL);
 	kfree(dma);
+
+	pm_runtime_mark_last_busy(cdns->dev);
+	pm_runtime_put_autosuspend(cdns->dev);
 }
 
 static int intel_pcm_set_sdw_stream(struct snd_soc_dai *dai,
@@ -1180,6 +1205,7 @@ static int intel_master_startup(struct sdw_master_device *md)
 {
 	struct sdw_cdns_stream_config config;
 	struct sdw_intel *sdw;
+	int link_flags;
 	int ret;
 
 	sdw = md->pdata;
@@ -1225,6 +1251,17 @@ static int intel_master_startup(struct sdw_master_device *md)
 
 	intel_debugfs_init(sdw);
 
+	/* Enable runtime PM */
+	link_flags = md_flags >> (sdw->cdns.bus.link_id * 8);
+	if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME)) {
+		pm_runtime_set_autosuspend_delay(&md->dev, 3000);
+		pm_runtime_use_autosuspend(&md->dev);
+		pm_runtime_mark_last_busy(&md->dev);
+
+		pm_runtime_set_active(&md->dev);
+		pm_runtime_enable(&md->dev);
+	}
+
 	return 0;
 
 err_interrupt:
@@ -1288,6 +1325,35 @@ static int intel_suspend(struct device *dev)
 	return 0;
 }
 
+static int intel_suspend_runtime(struct device *dev)
+{
+	struct sdw_cdns *cdns = dev_get_drvdata(dev);
+	struct sdw_intel *sdw = cdns_to_intel(cdns);
+	int ret;
+
+	if (cdns->bus.prop.hw_disabled) {
+		dev_dbg(dev, "SoundWire master %d is disabled, ignoring\n",
+			cdns->bus.link_id);
+		return 0;
+	}
+
+	ret = sdw_cdns_enable_interrupt(cdns, false);
+	if (ret < 0) {
+		dev_err(dev, "cannot disable interrupts on suspend\n");
+		return ret;
+	}
+
+	ret = intel_link_power_down(sdw);
+	if (ret) {
+		dev_err(dev, "Link power down failed: %d", ret);
+		return ret;
+	}
+
+	intel_shim_wake(sdw, false);
+
+	return 0;
+}
+
 static int intel_resume(struct device *dev)
 {
 	struct sdw_cdns *cdns = dev_get_drvdata(dev);
@@ -1321,10 +1387,44 @@ static int intel_resume(struct device *dev)
 	return ret;
 }
 
+static int intel_resume_runtime(struct device *dev)
+{
+	struct sdw_cdns *cdns = dev_get_drvdata(dev);
+	struct sdw_intel *sdw = cdns_to_intel(cdns);
+	int ret;
+
+	if (cdns->bus.prop.hw_disabled) {
+		dev_dbg(dev, "SoundWire master %d is disabled, ignoring\n",
+			cdns->bus.link_id);
+		return 0;
+	}
+
+	ret = intel_init(sdw);
+	if (ret) {
+		dev_err(dev, "%s failed: %d", __func__, ret);
+		return ret;
+	}
+
+	ret = sdw_cdns_enable_interrupt(cdns, true);
+	if (ret < 0) {
+		dev_err(dev, "cannot enable interrupts during resume\n");
+		return ret;
+	}
+
+	ret = sdw_cdns_exit_reset(cdns);
+	if (ret < 0) {
+		dev_err(dev, "unable to exit bus reset sequence during resume\n");
+		return ret;
+	}
+
+	return ret;
+}
+
 #endif
 
 static const struct dev_pm_ops intel_pm = {
 	SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume)
+	SET_RUNTIME_PM_OPS(intel_suspend_runtime, intel_resume_runtime, NULL)
 };
 
 struct sdw_md_driver intel_sdw_driver = {
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  parent reply	other threads:[~2019-11-06 19:22 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-06 19:22 [PATCH v2 00/19] soundwire: code hardening and suspend-resume support Pierre-Louis Bossart
2019-11-06 19:22 ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 01/19] soundwire: intel/cadence: fix timeouts in MSI mode Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 02/19] soundwire: fix race between driver probe and update_status callback Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 03/19] soundwire: bus: add PM/no-PM versions of read/write functions Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 04/19] soundwire: bus: write Slave Device Number without runtime_pm Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 05/19] soundwire: intel: add helpers for link power down and shim wake Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 06/19] soundwire: intel: Add basic power management support Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` Pierre-Louis Bossart [this message]
2019-11-06 19:22   ` [alsa-devel] [PATCH v2 07/19] soundwire: intel: add pm_runtime support Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 08/19] soundwire: intel: reset pm_runtime status during system resume Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 09/19] soundwire: bus: add helper to reset Slave status to UNATTACHED Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 10/19] soundwire: intel: call helper to reset Slave states on resume Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 11/19] soundwire: bus: check first if Slaves become UNATTACHED Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 12/19] soundwire: add enumeration_complete signaling Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 13/19] soundwire: bus: add initialization_complete signaling Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 14/19] soundwire: intel: disable pm_runtime when removing a master Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 15/19] soundwire: bus: disable pm_runtime in sdw_slave_delete Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 16/19] soundwire: stream: update state machine and add state checks Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 17/19] soundwire: stream: only prepare stream when it is configured Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 18/19] soundwire: stream: do not update parameters during DISABLED-PREPARED transition Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 19/19] soundwire: intel: reinitialize IP+DSP in .prepare() Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191106192223.6003-8-pierre-louis.bossart@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jank@cadence.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rander.wang@linux.intel.com \
    --cc=ranjani.sridharan@linux.intel.com \
    --cc=sanyog.r.kale@intel.com \
    --cc=slawomir.blauciak@intel.com \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=tiwai@suse.de \
    --cc=vkoul@kernel.org \
    --cc=yung-chuan.liao@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.