From: kbuild test robot <lkp@intel.com>
To: Rocky Liao <rjliao@codeaurora.org>
Cc: kbuild-all@lists.01.org, marcel@holtmann.org,
johan.hedberg@gmail.com, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Rocky Liao <rjliao@codeaurora.org>
Subject: Re: [PATCH v1 4/4] Bluetooth: hci_qca: Add HCI command timeout handling
Date: Fri, 27 Dec 2019 07:33:12 +0800 [thread overview]
Message-ID: <201912270755.L7a9SOof%lkp@intel.com> (raw)
In-Reply-To: <20191225060317.5258-4-rjliao@codeaurora.org>
Hi Rocky,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on bluetooth-next/master]
[also build test WARNING on linux/master linus/master v5.5-rc3 next-20191220]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Rocky-Liao/Bluetooth-hci_qca-Add-QCA-Rome-power-off-support-to-the-qca_power_off/20191226-050217
base: https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git master
reproduce:
# apt-get install sparse
# sparse version: v0.6.1-129-g341daf20-dirty
make ARCH=x86_64 allmodconfig
make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/bluetooth/hci_qca.c:1504:9: sparse: sparse: no member 'cmd_timeout_cnt' in struct qca_data
drivers/bluetooth/hci_qca.c:1506:16: sparse: sparse: no member 'cmd_timeout_cnt' in struct qca_data
>> drivers/bluetooth/hci_qca.c:1346:35: sparse: sparse: incorrect type in assignment (incompatible argument 1 (different base types))
>> drivers/bluetooth/hci_qca.c:1346:35: sparse: expected void ( *cmd_timeout )( ... )
>> drivers/bluetooth/hci_qca.c:1346:35: sparse: got void ( * )( ... )
drivers/bluetooth/hci_qca.c:1347:20: sparse: sparse: no member 'cmd_timeout_cnt' in struct qca_data
vim +1346 drivers/bluetooth/hci_qca.c
1264
1265 static int qca_setup(struct hci_uart *hu)
1266 {
1267 struct hci_dev *hdev = hu->hdev;
1268 struct qca_data *qca = hu->priv;
1269 struct qca_serdev *qcadev;
1270 unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
1271 unsigned int init_retry_count = 0;
1272 enum qca_btsoc_type soc_type = qca_soc_type(hu);
1273 const char *firmware_name = qca_get_firmware_name(hu);
1274 int ret;
1275 int soc_ver = 0;
1276
1277 ret = qca_check_speeds(hu);
1278 if (ret)
1279 return ret;
1280
1281 /* Patch downloading has to be done without IBS mode */
1282 clear_bit(QCA_IBS_ENABLED, &qca->flags);
1283
1284 /* Enable controller to do both LE scan and BR/EDR inquiry
1285 * simultaneously.
1286 */
1287 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
1288
1289 retry:
1290 if (qca_is_wcn399x(soc_type)) {
1291 bt_dev_info(hdev, "setting up wcn3990");
1292
1293 /* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
1294 * setup for every hci up.
1295 */
1296 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
1297 set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
1298 hu->hdev->shutdown = qca_power_off;
1299 ret = qca_wcn3990_init(hu);
1300 if (ret)
1301 return ret;
1302
1303 ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
1304 if (ret)
1305 return ret;
1306 } else {
1307 bt_dev_info(hdev, "ROME setup");
1308 if (hu->serdev) {
1309 /* Enable NON_PERSISTENT_SETUP QUIRK to ensure to
1310 * execute setup for every hci up.
1311 */
1312 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
1313 hu->hdev->shutdown = qca_power_off;
1314 qcadev = serdev_device_get_drvdata(hu->serdev);
1315 gpiod_set_value_cansleep(qcadev->bt_en, 1);
1316 /* Controller needs time to bootup. */
1317 msleep(150);
1318 }
1319 qca_set_speed(hu, QCA_INIT_SPEED);
1320 }
1321
1322 /* Setup user speed if needed */
1323 speed = qca_get_speed(hu, QCA_OPER_SPEED);
1324 if (speed) {
1325 ret = qca_set_speed(hu, QCA_OPER_SPEED);
1326 if (ret)
1327 return ret;
1328
1329 qca_baudrate = qca_get_baudrate_value(speed);
1330 }
1331
1332 if (!qca_is_wcn399x(soc_type)) {
1333 /* Get QCA version information */
1334 ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
1335 if (ret)
1336 return ret;
1337 }
1338
1339 bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
1340 /* Setup patch / NVM configurations */
1341 ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver,
1342 firmware_name);
1343 if (!ret) {
1344 set_bit(QCA_IBS_ENABLED, &qca->flags);
1345 qca_debugfs_init(hdev);
> 1346 hdev->cmd_timeout = qca_cmd_timeout;
1347 qca->cmd_timeout_cnt = 0;
1348 } else if (ret == -ENOENT) {
1349 /* No patch/nvm-config found, run with original fw/config */
1350 ret = 0;
1351 } else if (ret == -EAGAIN) {
1352 /*
1353 * Userspace firmware loader will return -EAGAIN in case no
1354 * patch/nvm-config is found, so run with original fw/config.
1355 */
1356 ret = 0;
1357 } else {
1358 if (init_retry_count < QCA_MAX_INIT_RETRY_COUNT) {
1359 qca_power_off(hdev);
1360 if (hu->serdev) {
1361 serdev_device_close(hu->serdev);
1362 ret = serdev_device_open(hu->serdev);
1363 if (ret) {
1364 bt_dev_err(hu->hdev, "open port fail");
1365 return ret;
1366 }
1367 }
1368 init_retry_count++;
1369 goto retry;
1370 }
1371 }
1372
1373 /* Setup bdaddr */
1374 if (qca_is_wcn399x(soc_type))
1375 hu->hdev->set_bdaddr = qca_set_bdaddr;
1376 else
1377 hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
1378
1379 return ret;
1380 }
1381
1382 static const struct hci_uart_proto qca_proto = {
1383 .id = HCI_UART_QCA,
1384 .name = "QCA",
1385 .manufacturer = 29,
1386 .init_speed = 115200,
1387 .oper_speed = 3000000,
1388 .open = qca_open,
1389 .close = qca_close,
1390 .flush = qca_flush,
1391 .setup = qca_setup,
1392 .recv = qca_recv,
1393 .enqueue = qca_enqueue,
1394 .dequeue = qca_dequeue,
1395 };
1396
1397 static const struct qca_vreg_data qca_soc_data_wcn3990 = {
1398 .soc_type = QCA_WCN3990,
1399 .vregs = (struct qca_vreg []) {
1400 { "vddio", 15000 },
1401 { "vddxo", 80000 },
1402 { "vddrf", 300000 },
1403 { "vddch0", 450000 },
1404 },
1405 .num_vregs = 4,
1406 };
1407
1408 static const struct qca_vreg_data qca_soc_data_wcn3991 = {
1409 .soc_type = QCA_WCN3991,
1410 .vregs = (struct qca_vreg []) {
1411 { "vddio", 15000 },
1412 { "vddxo", 80000 },
1413 { "vddrf", 300000 },
1414 { "vddch0", 450000 },
1415 },
1416 .num_vregs = 4,
1417 };
1418
1419 static const struct qca_vreg_data qca_soc_data_wcn3998 = {
1420 .soc_type = QCA_WCN3998,
1421 .vregs = (struct qca_vreg []) {
1422 { "vddio", 10000 },
1423 { "vddxo", 80000 },
1424 { "vddrf", 300000 },
1425 { "vddch0", 450000 },
1426 },
1427 .num_vregs = 4,
1428 };
1429
1430 static void qca_power_shutdown(struct hci_uart *hu)
1431 {
1432 struct qca_serdev *qcadev;
1433 struct qca_data *qca = hu->priv;
1434 unsigned long flags;
1435
1436 qcadev = serdev_device_get_drvdata(hu->serdev);
1437
1438 /* From this point we go into power off state. But serial port is
1439 * still open, stop queueing the IBS data and flush all the buffered
1440 * data in skb's.
1441 */
1442 spin_lock_irqsave(&qca->hci_ibs_lock, flags);
1443 clear_bit(QCA_IBS_ENABLED, &qca->flags);
1444 qca_flush(hu);
1445 spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
1446
1447 host_set_baudrate(hu, 2400);
1448 qca_send_power_pulse(hu, false);
1449 qca_regulator_disable(qcadev);
1450 }
1451
1452 static int qca_power_off(struct hci_dev *hdev)
1453 {
1454 struct hci_uart *hu = hci_get_drvdata(hdev);
1455 struct qca_serdev *qcadev;
1456 enum qca_btsoc_type soc_type = qca_soc_type(hu);
1457
1458 if (qca_is_wcn399x(soc_type)) {
1459 /* Perform pre shutdown command */
1460 qca_send_pre_shutdown_cmd(hdev);
1461
1462 usleep_range(8000, 10000);
1463
1464 qca_power_shutdown(hu);
1465 } else {
1466 if (hu->serdev) {
1467 qcadev = serdev_device_get_drvdata(hu->serdev);
1468
1469 gpiod_set_value_cansleep(qcadev->bt_en, 0);
1470
1471 usleep_range(8000, 10000);
1472 }
1473 }
1474
1475 return 0;
1476 }
1477
1478 static int qca_send_btsoc_dump_cmd(struct hci_uart *hu)
1479 {
1480 int err = 0;
1481 struct sk_buff *skb = NULL;
1482 struct qca_data *qca = hu->priv;
1483
1484 BT_DBG("hu %p sending btsoc dump command", hu);
1485
1486 skb = bt_skb_alloc(1, GFP_ATOMIC);
1487 if (!skb) {
1488 BT_ERR("Failed to allocate memory for qca dump command");
1489 return -ENOMEM;
1490 }
1491
1492 skb_put_u8(skb, QCA_BTSOC_DUMP_CMD);
1493
1494 skb_queue_tail(&qca->txq, skb);
1495
1496 return err;
1497 }
1498
1499
1500 static void qca_cmd_timeout(struct hci_uart *hu)
1501 {
1502 struct qca_data *qca = hu->priv;
1503
> 1504 BT_ERR("hu %p hci cmd timeout count=0x%x", hu, ++qca->cmd_timeout_cnt);
1505
1506 if (qca->cmd_timeout_cnt >= QCA_MAX_CMD_TIMEOUT_COUNT)
1507 qca_send_btsoc_dump_cmd(hu);
1508 }
1509
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org Intel Corporation
WARNING: multiple messages have this Message-ID (diff)
From: kbuild test robot <lkp@intel.com>
To: kbuild-all@lists.01.org
Subject: Re: [PATCH v1 4/4] Bluetooth: hci_qca: Add HCI command timeout handling
Date: Fri, 27 Dec 2019 07:33:12 +0800 [thread overview]
Message-ID: <201912270755.L7a9SOof%lkp@intel.com> (raw)
In-Reply-To: <20191225060317.5258-4-rjliao@codeaurora.org>
[-- Attachment #1: Type: text/plain, Size: 9692 bytes --]
Hi Rocky,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on bluetooth-next/master]
[also build test WARNING on linux/master linus/master v5.5-rc3 next-20191220]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Rocky-Liao/Bluetooth-hci_qca-Add-QCA-Rome-power-off-support-to-the-qca_power_off/20191226-050217
base: https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git master
reproduce:
# apt-get install sparse
# sparse version: v0.6.1-129-g341daf20-dirty
make ARCH=x86_64 allmodconfig
make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/bluetooth/hci_qca.c:1504:9: sparse: sparse: no member 'cmd_timeout_cnt' in struct qca_data
drivers/bluetooth/hci_qca.c:1506:16: sparse: sparse: no member 'cmd_timeout_cnt' in struct qca_data
>> drivers/bluetooth/hci_qca.c:1346:35: sparse: sparse: incorrect type in assignment (incompatible argument 1 (different base types))
>> drivers/bluetooth/hci_qca.c:1346:35: sparse: expected void ( *cmd_timeout )( ... )
>> drivers/bluetooth/hci_qca.c:1346:35: sparse: got void ( * )( ... )
drivers/bluetooth/hci_qca.c:1347:20: sparse: sparse: no member 'cmd_timeout_cnt' in struct qca_data
vim +1346 drivers/bluetooth/hci_qca.c
1264
1265 static int qca_setup(struct hci_uart *hu)
1266 {
1267 struct hci_dev *hdev = hu->hdev;
1268 struct qca_data *qca = hu->priv;
1269 struct qca_serdev *qcadev;
1270 unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
1271 unsigned int init_retry_count = 0;
1272 enum qca_btsoc_type soc_type = qca_soc_type(hu);
1273 const char *firmware_name = qca_get_firmware_name(hu);
1274 int ret;
1275 int soc_ver = 0;
1276
1277 ret = qca_check_speeds(hu);
1278 if (ret)
1279 return ret;
1280
1281 /* Patch downloading has to be done without IBS mode */
1282 clear_bit(QCA_IBS_ENABLED, &qca->flags);
1283
1284 /* Enable controller to do both LE scan and BR/EDR inquiry
1285 * simultaneously.
1286 */
1287 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
1288
1289 retry:
1290 if (qca_is_wcn399x(soc_type)) {
1291 bt_dev_info(hdev, "setting up wcn3990");
1292
1293 /* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
1294 * setup for every hci up.
1295 */
1296 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
1297 set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
1298 hu->hdev->shutdown = qca_power_off;
1299 ret = qca_wcn3990_init(hu);
1300 if (ret)
1301 return ret;
1302
1303 ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
1304 if (ret)
1305 return ret;
1306 } else {
1307 bt_dev_info(hdev, "ROME setup");
1308 if (hu->serdev) {
1309 /* Enable NON_PERSISTENT_SETUP QUIRK to ensure to
1310 * execute setup for every hci up.
1311 */
1312 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
1313 hu->hdev->shutdown = qca_power_off;
1314 qcadev = serdev_device_get_drvdata(hu->serdev);
1315 gpiod_set_value_cansleep(qcadev->bt_en, 1);
1316 /* Controller needs time to bootup. */
1317 msleep(150);
1318 }
1319 qca_set_speed(hu, QCA_INIT_SPEED);
1320 }
1321
1322 /* Setup user speed if needed */
1323 speed = qca_get_speed(hu, QCA_OPER_SPEED);
1324 if (speed) {
1325 ret = qca_set_speed(hu, QCA_OPER_SPEED);
1326 if (ret)
1327 return ret;
1328
1329 qca_baudrate = qca_get_baudrate_value(speed);
1330 }
1331
1332 if (!qca_is_wcn399x(soc_type)) {
1333 /* Get QCA version information */
1334 ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
1335 if (ret)
1336 return ret;
1337 }
1338
1339 bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
1340 /* Setup patch / NVM configurations */
1341 ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver,
1342 firmware_name);
1343 if (!ret) {
1344 set_bit(QCA_IBS_ENABLED, &qca->flags);
1345 qca_debugfs_init(hdev);
> 1346 hdev->cmd_timeout = qca_cmd_timeout;
1347 qca->cmd_timeout_cnt = 0;
1348 } else if (ret == -ENOENT) {
1349 /* No patch/nvm-config found, run with original fw/config */
1350 ret = 0;
1351 } else if (ret == -EAGAIN) {
1352 /*
1353 * Userspace firmware loader will return -EAGAIN in case no
1354 * patch/nvm-config is found, so run with original fw/config.
1355 */
1356 ret = 0;
1357 } else {
1358 if (init_retry_count < QCA_MAX_INIT_RETRY_COUNT) {
1359 qca_power_off(hdev);
1360 if (hu->serdev) {
1361 serdev_device_close(hu->serdev);
1362 ret = serdev_device_open(hu->serdev);
1363 if (ret) {
1364 bt_dev_err(hu->hdev, "open port fail");
1365 return ret;
1366 }
1367 }
1368 init_retry_count++;
1369 goto retry;
1370 }
1371 }
1372
1373 /* Setup bdaddr */
1374 if (qca_is_wcn399x(soc_type))
1375 hu->hdev->set_bdaddr = qca_set_bdaddr;
1376 else
1377 hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
1378
1379 return ret;
1380 }
1381
1382 static const struct hci_uart_proto qca_proto = {
1383 .id = HCI_UART_QCA,
1384 .name = "QCA",
1385 .manufacturer = 29,
1386 .init_speed = 115200,
1387 .oper_speed = 3000000,
1388 .open = qca_open,
1389 .close = qca_close,
1390 .flush = qca_flush,
1391 .setup = qca_setup,
1392 .recv = qca_recv,
1393 .enqueue = qca_enqueue,
1394 .dequeue = qca_dequeue,
1395 };
1396
1397 static const struct qca_vreg_data qca_soc_data_wcn3990 = {
1398 .soc_type = QCA_WCN3990,
1399 .vregs = (struct qca_vreg []) {
1400 { "vddio", 15000 },
1401 { "vddxo", 80000 },
1402 { "vddrf", 300000 },
1403 { "vddch0", 450000 },
1404 },
1405 .num_vregs = 4,
1406 };
1407
1408 static const struct qca_vreg_data qca_soc_data_wcn3991 = {
1409 .soc_type = QCA_WCN3991,
1410 .vregs = (struct qca_vreg []) {
1411 { "vddio", 15000 },
1412 { "vddxo", 80000 },
1413 { "vddrf", 300000 },
1414 { "vddch0", 450000 },
1415 },
1416 .num_vregs = 4,
1417 };
1418
1419 static const struct qca_vreg_data qca_soc_data_wcn3998 = {
1420 .soc_type = QCA_WCN3998,
1421 .vregs = (struct qca_vreg []) {
1422 { "vddio", 10000 },
1423 { "vddxo", 80000 },
1424 { "vddrf", 300000 },
1425 { "vddch0", 450000 },
1426 },
1427 .num_vregs = 4,
1428 };
1429
1430 static void qca_power_shutdown(struct hci_uart *hu)
1431 {
1432 struct qca_serdev *qcadev;
1433 struct qca_data *qca = hu->priv;
1434 unsigned long flags;
1435
1436 qcadev = serdev_device_get_drvdata(hu->serdev);
1437
1438 /* From this point we go into power off state. But serial port is
1439 * still open, stop queueing the IBS data and flush all the buffered
1440 * data in skb's.
1441 */
1442 spin_lock_irqsave(&qca->hci_ibs_lock, flags);
1443 clear_bit(QCA_IBS_ENABLED, &qca->flags);
1444 qca_flush(hu);
1445 spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
1446
1447 host_set_baudrate(hu, 2400);
1448 qca_send_power_pulse(hu, false);
1449 qca_regulator_disable(qcadev);
1450 }
1451
1452 static int qca_power_off(struct hci_dev *hdev)
1453 {
1454 struct hci_uart *hu = hci_get_drvdata(hdev);
1455 struct qca_serdev *qcadev;
1456 enum qca_btsoc_type soc_type = qca_soc_type(hu);
1457
1458 if (qca_is_wcn399x(soc_type)) {
1459 /* Perform pre shutdown command */
1460 qca_send_pre_shutdown_cmd(hdev);
1461
1462 usleep_range(8000, 10000);
1463
1464 qca_power_shutdown(hu);
1465 } else {
1466 if (hu->serdev) {
1467 qcadev = serdev_device_get_drvdata(hu->serdev);
1468
1469 gpiod_set_value_cansleep(qcadev->bt_en, 0);
1470
1471 usleep_range(8000, 10000);
1472 }
1473 }
1474
1475 return 0;
1476 }
1477
1478 static int qca_send_btsoc_dump_cmd(struct hci_uart *hu)
1479 {
1480 int err = 0;
1481 struct sk_buff *skb = NULL;
1482 struct qca_data *qca = hu->priv;
1483
1484 BT_DBG("hu %p sending btsoc dump command", hu);
1485
1486 skb = bt_skb_alloc(1, GFP_ATOMIC);
1487 if (!skb) {
1488 BT_ERR("Failed to allocate memory for qca dump command");
1489 return -ENOMEM;
1490 }
1491
1492 skb_put_u8(skb, QCA_BTSOC_DUMP_CMD);
1493
1494 skb_queue_tail(&qca->txq, skb);
1495
1496 return err;
1497 }
1498
1499
1500 static void qca_cmd_timeout(struct hci_uart *hu)
1501 {
1502 struct qca_data *qca = hu->priv;
1503
> 1504 BT_ERR("hu %p hci cmd timeout count=0x%x", hu, ++qca->cmd_timeout_cnt);
1505
1506 if (qca->cmd_timeout_cnt >= QCA_MAX_CMD_TIMEOUT_COUNT)
1507 qca_send_btsoc_dump_cmd(hu);
1508 }
1509
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org Intel Corporation
next prev parent reply other threads:[~2019-12-26 23:33 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-25 6:03 [PATCH v1 1/4] Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_off() Rocky Liao
2019-12-25 6:03 ` [PATCH v1 2/4] Bluetooth: hci_qca: Retry btsoc initialize when it fails Rocky Liao
2019-12-25 6:03 ` [PATCH v1 3/4] Bluetooth: hci_qca: Enable power off/on support during hci down/up for QCA Rome Rocky Liao
2019-12-25 6:03 ` [PATCH v1 4/4] Bluetooth: hci_qca: Add HCI command timeout handling Rocky Liao
2019-12-26 3:04 ` kbuild test robot
2019-12-26 3:04 ` kbuild test robot
2019-12-26 7:46 ` kbuild test robot
2019-12-26 7:46 ` kbuild test robot
2019-12-26 23:33 ` kbuild test robot [this message]
2019-12-26 23:33 ` kbuild test robot
2019-12-26 6:45 ` [PATCH v2 1/4] Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_off() Rocky Liao
2019-12-26 6:45 ` [PATCH v2 2/4] Bluetooth: hci_qca: Retry btsoc initialize when it fails Rocky Liao
2019-12-26 6:45 ` [PATCH v2 3/4] Bluetooth: hci_qca: Enable power off/on support during hci down/up for QCA Rome Rocky Liao
2019-12-26 20:30 ` Marcel Holtmann
2019-12-26 6:45 ` [PATCH v2 4/4] Bluetooth: hci_qca: Add HCI command timeout handling Rocky Liao
2019-12-26 20:29 ` Marcel Holtmann
2019-12-27 7:21 ` [PATCH v3 1/4] Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_off() Rocky Liao
2019-12-27 7:21 ` [PATCH v3 2/4] Bluetooth: hci_qca: Retry btsoc initialize when it fails Rocky Liao
2020-01-02 18:41 ` Matthias Kaehlcke
2020-01-03 6:31 ` rjliao
2020-01-03 16:27 ` Matthias Kaehlcke
2020-01-07 5:34 ` Rocky Liao
2019-12-27 7:21 ` [PATCH v3 3/4] Bluetooth: hci_qca: Enable power off/on support during hci down/up for QCA Rome Rocky Liao
2019-12-27 7:21 ` [PATCH v3 4/4] Bluetooth: hci_qca: Add HCI command timeout handling Rocky Liao
2020-01-02 19:07 ` Matthias Kaehlcke
2020-01-03 6:33 ` rjliao
2020-01-03 9:02 ` Rocky Liao
2020-01-15 8:55 ` [PATCH v4 1/3] Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_shutdown() Rocky Liao
2020-01-15 8:55 ` [PATCH v4 2/3] Bluetooth: hci_qca: Retry btsoc initialize when it fails Rocky Liao
2020-01-15 17:33 ` Matthias Kaehlcke
2020-01-15 21:37 ` Marcel Holtmann
2020-01-15 8:55 ` [PATCH v4 3/3] Bluetooth: hci_qca: Enable power off/on support during hci down/up for QCA Rome Rocky Liao
2020-01-15 18:02 ` Matthias Kaehlcke
2020-01-15 17:26 ` [PATCH v4 1/3] Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_shutdown() Matthias Kaehlcke
2020-01-15 21:37 ` Marcel Holtmann
2020-01-16 3:22 ` [PATCH v5] Bluetooth: hci_qca: Enable power off/on support during hci down/up for QCA Rome Rocky Liao
2020-01-16 5:31 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201912270755.L7a9SOof%lkp@intel.com \
--to=lkp@intel.com \
--cc=johan.hedberg@gmail.com \
--cc=kbuild-all@lists.01.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=rjliao@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.