[igt-dev] [PATCH i-g-t 0/3] Test configurable poll delay in perf OA

[igt-dev] [PATCH i-g-t 0/3] Test configurable poll delay in perf OA

[Umesh Nerlige Ramappa]

Add tests that verify the configurable poll delay in perf OA.

Lionel Landwerlin (2):
  include/drm-uapi: Update i915_drm.h for perf OA APIs
  tests/perf: new tests for parameterized OA buffer polling

Umesh Nerlige Ramappa (1):
  tools: Allow user to set poll delay in i915 perf recorder

 include/drm-uapi/i915_drm.h          |  13 +++
 tests/perf.c                         | 136 ++++++++++++++++++++-------
 tools/i915-perf/i915_perf_recorder.c |  37 +++++++-
 3 files changed, 149 insertions(+), 37 deletions(-)

-- 
2.20.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] [PATCH i-g-t 1/3] include/drm-uapi: Update i915_drm.h for perf OA APIs

[Umesh Nerlige Ramappa]

From: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

Add APIs to configure poll delay in perf OA.

v2: (Umesh)
- Remove interrupt and flush APIs
- Change commit message

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
---
 include/drm-uapi/i915_drm.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/include/drm-uapi/i915_drm.h b/include/drm-uapi/i915_drm.h
index 3794e768..813175c4 100644
--- a/include/drm-uapi/i915_drm.h
+++ b/include/drm-uapi/i915_drm.h
@@ -1969,6 +1969,19 @@ enum drm_i915_perf_property_id {
 	 */
 	DRM_I915_PERF_PROP_HOLD_PREEMPTION,
 
+	/**
+	 * This optional parameter specifies the timer interval in nanoseconds
+	 * at which the i915 driver will check the OA buffer for available data.
+	 * Minimum allowed value is 100 microseconds. A default value is used by
+	 * the driver if this parameter is not specified. Note that a large
+	 * value may reduce cpu consumption during OA perf captures, but it
+	 * would also potentially result in OA buffer overwrite as the captures
+	 * reach end of the OA buffer.
+	 *
+	 * This property is available in perf revision 4.
+	 */
+	DRM_I915_PERF_PROP_POLL_OA_DELAY,
+
 	DRM_I915_PERF_PROP_MAX /* non-ABI */
 };
 
-- 
2.20.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] [PATCH i-g-t 2/3] tests/perf: new tests for parameterized OA buffer polling

[Umesh Nerlige Ramappa]

From: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

2 new tests verifying that the OA buffer is properly checked at the
frequency specified by userspace.

v2: (Umesh)
- Capture start_times in test_polling
- Second parameterized test used a 500us hrtimer. Occassionally, this
  timing does not fall within the duration/100 requirement for the time
  spent in kernel. Change this value to 2ms to accommodate all
  platforms.

v3: (Lionel)
- Use NUM_PROPERTIES

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
---
 tests/perf.c | 136 ++++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 102 insertions(+), 34 deletions(-)

diff --git a/tests/perf.c b/tests/perf.c
index 5e818030..9dfa6ec5 100644
--- a/tests/perf.c
+++ b/tests/perf.c
@@ -234,6 +234,24 @@ get_oa_format(enum drm_i915_oa_format format)
 		return gen8_oa_formats[format];
 }
 
+static char *
+pretty_print_oa_period(uint64_t oa_period_ns)
+{
+	static char result[100];
+	static const char *units[4] = { "ns", "us", "ms", "s" };
+	double val = oa_period_ns;
+	int iter = 0;
+
+	while (iter < (ARRAY_SIZE(units) - 1) &&
+	       val >= 1000.0f) {
+		val /= 1000.0f;
+		iter++;
+	}
+
+	snprintf(result, sizeof(result), "%.3f%s", val, units[iter]);
+	return result;
+}
+
 static void
 __perf_close(int fd)
 {
@@ -1921,15 +1939,9 @@ get_time(void)
  * kernelspace.
  */
 static void
-test_blocking(void)
+test_blocking(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t kernel_hrtimer)
 {
-	/* ~40 milliseconds
-	 *
-	 * Having a period somewhat > sysconf(_SC_CLK_TCK) helps to stop
-	 * scheduling (liable to kick in when we make blocking poll()s/reads)
-	 * from interfering with the test.
-	 */
-	int oa_exponent = max_oa_exponent_for_period_lte(40000000);
+	int oa_exponent = max_oa_exponent_for_period_lte(requested_oa_period);
 	uint64_t oa_period = oa_exponent_to_ns(oa_exponent);
 	uint64_t properties[] = {
 		/* Include OA reports in samples */
@@ -1939,11 +1951,16 @@ test_blocking(void)
 		DRM_I915_PERF_PROP_OA_METRICS_SET, test_set->perf_oa_metrics_set,
 		DRM_I915_PERF_PROP_OA_FORMAT, test_set->perf_oa_format,
 		DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
+
+		/* Kernel configuration (optional) */
+		DRM_I915_PERF_PROP_POLL_OA_DELAY, kernel_hrtimer,
 	};
 	struct drm_i915_perf_open_param param = {
 		.flags = I915_PERF_FLAG_FD_CLOEXEC |
 			I915_PERF_FLAG_DISABLED,
-		.num_properties = sizeof(properties) / 16,
+		.num_properties = set_kernel_hrtimer ?
+				  NUM_PROPERTIES(properties) :
+				  NUM_PROPERTIES(properties) - 1,
 		.properties_ptr = to_user_pointer(properties),
 	};
 	uint8_t buf[1024 * 1024];
@@ -1965,7 +1982,7 @@ test_blocking(void)
 	 * the knowledge that that the driver uses a 200Hz hrtimer (5ms period)
 	 * to check for data and giving some time to read().
 	 */
-	int min_iterations = (test_duration_ns / (oa_period + 6000000ull));
+	int min_iterations = (test_duration_ns / (oa_period + kernel_hrtimer + kernel_hrtimer / 5));
 
 	int64_t start, end;
 	int n = 0;
@@ -1975,9 +1992,10 @@ test_blocking(void)
 	times(&start_times);
 
 	igt_debug("tick length = %dns, test duration = %"PRIu64"ns, min iter. = %d,"
-		  " estimated max iter. = %d, oa_period = %"PRIu64"ns\n",
+		  " estimated max iter. = %d, oa_period = %s\n",
 		  (int)tick_ns, test_duration_ns,
-		  min_iterations, max_iterations, oa_period);
+		  min_iterations, max_iterations,
+		  pretty_print_oa_period(oa_period));
 
 	/* In the loop we perform blocking polls while the HW is sampling at
 	 * ~25Hz, with the expectation that we spend most of our time blocked
@@ -2079,15 +2097,9 @@ test_blocking(void)
 }
 
 static void
-test_polling(void)
+test_polling(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t kernel_hrtimer)
 {
-	/* ~40 milliseconds
-	 *
-	 * Having a period somewhat > sysconf(_SC_CLK_TCK) helps to stop
-	 * scheduling (liable to kick in when we make blocking poll()s/reads)
-	 * from interfering with the test.
-	 */
-	int oa_exponent = max_oa_exponent_for_period_lte(40000000);
+	int oa_exponent = max_oa_exponent_for_period_lte(requested_oa_period);
 	uint64_t oa_period = oa_exponent_to_ns(oa_exponent);
 	uint64_t properties[] = {
 		/* Include OA reports in samples */
@@ -2097,12 +2109,17 @@ test_polling(void)
 		DRM_I915_PERF_PROP_OA_METRICS_SET, test_set->perf_oa_metrics_set,
 		DRM_I915_PERF_PROP_OA_FORMAT, test_set->perf_oa_format,
 		DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
+
+		/* Kernel configuration (optional) */
+		DRM_I915_PERF_PROP_POLL_OA_DELAY, kernel_hrtimer,
 	};
 	struct drm_i915_perf_open_param param = {
 		.flags = I915_PERF_FLAG_FD_CLOEXEC |
 			I915_PERF_FLAG_DISABLED |
 			I915_PERF_FLAG_FD_NONBLOCK,
-		.num_properties = sizeof(properties) / 16,
+		.num_properties = set_kernel_hrtimer ?
+				  NUM_PROPERTIES(properties) :
+				  NUM_PROPERTIES(properties) - 1,
 		.properties_ptr = to_user_pointer(properties),
 	};
 	uint8_t buf[1024 * 1024];
@@ -2116,15 +2133,16 @@ test_polling(void)
 	int n_extra_iterations = 0;
 
 	/* It's a bit tricky to put a lower limit here, but we expect a
-	 * relatively low latency for seeing reports, while we don't currently
-	 * give any control over this in the api.
+	 * relatively low latency for seeing reports.
 	 *
-	 * We assume a maximum latency of 6 millisecond to deliver a POLLIN and
-	 * read() after a new sample is written (46ms per iteration) considering
-	 * the knowledge that that the driver uses a 200Hz hrtimer (5ms period)
-	 * to check for data and giving some time to read().
+	 * We assume a maximum latency of kernel_hrtimer + some margin
+	 * to deliver a POLLIN and read() after a new sample is
+	 * written (40ms + hrtimer + margin per iteration) considering
+	 * the knowledge that that the driver uses a 200Hz hrtimer
+	 * (5ms period) to check for data and giving some time to
+	 * read().
 	 */
-	int min_iterations = (test_duration_ns / (oa_period + 6000000ull));
+	int min_iterations = (test_duration_ns / (oa_period + (kernel_hrtimer + kernel_hrtimer / 5)));
 	int64_t start, end;
 	int n = 0;
 
@@ -2132,8 +2150,9 @@ test_polling(void)
 
 	times(&start_times);
 
-	igt_debug("tick length = %dns, test duration = %"PRIu64"ns, min iter. = %d, max iter. = %d\n",
-		  (int)tick_ns, test_duration_ns,
+	igt_debug("tick length = %dns, oa period = %s, "
+		  "test duration = %"PRIu64"ns, min iter. = %d, max iter. = %d\n",
+		  (int)tick_ns, pretty_print_oa_period(oa_period), test_duration_ns,
 		  min_iterations, max_iterations);
 
 	/* In the loop we perform blocking polls while the HW is sampling at
@@ -4502,6 +4521,23 @@ test_sysctl_defaults(void)
 	igt_assert_eq(max_freq, 100000);
 }
 
+static int i915_perf_revision(int fd)
+{
+	drm_i915_getparam_t gp;
+	int value = 1, ret;
+
+	gp.param = I915_PARAM_PERF_REVISION;
+	gp.value = &value;
+	ret = igt_ioctl(drm_fd, DRM_IOCTL_I915_GETPARAM, &gp);
+	if (ret == -1) {
+		/* If the param is missing, consider version 1. */
+		igt_assert_eq(errno, EINVAL);
+		return 1;
+	}
+
+	return value;
+}
+
 igt_main
 {
 	igt_fixture {
@@ -4584,11 +4620,43 @@ igt_main
 	igt_subtest("enable-disable")
 		test_enable_disable();
 
-	igt_subtest("blocking")
-		test_blocking();
+	igt_describe("Test blocking read with default hrtimer frequency");
+	igt_subtest("blocking") {
+		test_blocking(40 * 1000 * 1000 /* 40ms oa period */,
+			      false /* set_kernel_hrtimer */,
+			      5 * 1000 * 1000 /* default 5ms/200Hz hrtimer */);
+	}
+
+	igt_describe("Test blocking read with different hrtimer frequencies");
+	igt_subtest("blocking-parameterized") {
+		igt_require(i915_perf_revision(drm_fd) >= 4);
+
+		test_blocking(10 * 1000 * 1000 /* 10ms oa period */,
+			      true /* set_kernel_hrtimer */,
+			      40 * 1000 * 1000 /* default 40ms hrtimer */);
+		test_blocking(500 * 1000 /* 500us oa period */,
+			      true /* set_kernel_hrtimer */,
+			      2 * 1000 * 1000 /* default 2ms hrtimer */);
+	}
 
-	igt_subtest("polling")
-		test_polling();
+	igt_describe("Test polled read with default hrtimer frequency");
+	igt_subtest("polling") {
+		test_polling(40 * 1000 * 1000 /* 40ms oa period */,
+			     false /* set_kernel_hrtimer */,
+			     5 * 1000 * 1000 /* default 5ms/200Hz hrtimer */);
+	}
+
+	igt_describe("Test polled read with different hrtimer frequencies");
+	igt_subtest("polling-parameterized") {
+		igt_require(i915_perf_revision(drm_fd) >= 4);
+
+		test_polling(10 * 1000 * 1000 /* 10ms oa period */,
+			     true /* set_kernel_hrtimer */,
+			     40 * 1000 * 1000 /* default 40ms hrtimer */);
+		test_polling(500 * 1000 /* 500us oa period */,
+			     true /* set_kernel_hrtimer */,
+			     2 * 1000 * 1000 /* default 2ms hrtimer */);
+	}
 
 	igt_subtest("short-reads")
 		test_short_reads();
-- 
2.20.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] [PATCH i-g-t 3/3] tools: Allow user to set poll delay in i915 perf recorder

[Umesh Nerlige Ramappa]

Add poll delay parameter to the i915-perf-recorder tool so that the user
can set the frequency of the poll timer that checks for available
reports in the OA buffer.

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
---
 tools/i915-perf/i915_perf_recorder.c | 37 +++++++++++++++++++++++++---
 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/tools/i915-perf/i915_perf_recorder.c b/tools/i915-perf/i915_perf_recorder.c
index 6bbc451e..60b7b732 100644
--- a/tools/i915-perf/i915_perf_recorder.c
+++ b/tools/i915-perf/i915_perf_recorder.c
@@ -353,14 +353,31 @@ struct recording_context {
 
 	const char *command_fifo;
 	int command_fifo_fd;
+
+	uint32_t poll_delay;
 };
 
+static int
+perf_revision(int drm_fd)
+{
+	drm_i915_getparam_t gp;
+	int value = 1;
+
+	gp.param = I915_PARAM_PERF_REVISION;
+	gp.value = &value;
+	perf_ioctl(drm_fd, DRM_IOCTL_I915_GETPARAM, &gp);
+
+	return value;
+}
+
 static int
 perf_open(struct recording_context *ctx)
 {
 	uint64_t properties[DRM_I915_PERF_PROP_MAX * 2];
 	struct drm_i915_perf_open_param param;
-	int p = 0, stream_fd;
+	int p = 0, stream_fd, revision;
+
+	revision = perf_revision(ctx->drm_fd);
 
 	properties[p++] = DRM_I915_PERF_PROP_SAMPLE_OA;
 	properties[p++] = true;
@@ -374,6 +391,11 @@ perf_open(struct recording_context *ctx)
 	properties[p++] = DRM_I915_PERF_PROP_OA_EXPONENT;
 	properties[p++] = ctx->oa_exponent;
 
+	if (revision >= 4) {
+		properties[p++] = DRM_I915_PERF_PROP_POLL_OA_DELAY;
+		properties[p++] = ctx->poll_delay;
+	}
+
 	memset(&param, 0, sizeof(param));
 	param.flags = 0;
 	param.flags |= I915_PERF_FLAG_FD_CLOEXEC | I915_PERF_FLAG_FD_NONBLOCK;
@@ -720,7 +742,10 @@ usage(const char *name)
 		"                                       (To use with i915-perf-control)\n"
 		"     --output,             -o <path>   Output file (default = i915_perf.record)\n"
 		"     --cpu-clock,          -k <path>   Cpu clock to use for correlations\n"
-		"                                       Values: boot, mono, mono_raw (default = mono)\n",
+		"                                       Values: boot, mono, mono_raw (default = mono)\n"
+		"     --poll-delay          -P <value>  Polling interval in microseconds used by a timer in the driver to query\n"
+		"                                       for OA reports periodically\n"
+		"                                       (default = 5000), Minimum = 100.\n",
 		name);
 }
 
@@ -762,6 +787,7 @@ main(int argc, char *argv[])
 		{"size",                 required_argument, 0, 's'},
 		{"command-fifo",         required_argument, 0, 'f'},
 		{"cpu-clock",            required_argument, 0, 'k'},
+		{"poll-delay",           required_argument, 0, 'P'},
 		{0, 0, 0, 0}
 	};
 	const struct {
@@ -788,9 +814,11 @@ main(int argc, char *argv[])
 
 		.command_fifo = I915_PERF_RECORD_FIFO_PATH,
 		.command_fifo_fd = -1,
+
+		.poll_delay = 5 * 1000 * 1000,
 	};
 
-	while ((opt = getopt_long(argc, argv, "hc:p:m:Co:s:f:k:", long_options, NULL)) != -1) {
+	while ((opt = getopt_long(argc, argv, "hc:p:m:Co:s:f:k:P:", long_options, NULL)) != -1) {
 		switch (opt) {
 		case 'h':
 			usage(argv[0]);
@@ -832,6 +860,9 @@ main(int argc, char *argv[])
 			}
 			break;
 		}
+		case 'P':
+			ctx.poll_delay = MAX(100, atoi(optarg)) * 1000;
+			break;
 		default:
 			fprintf(stderr, "Internal error: "
 				"unexpected getopt value: %d\n", opt);
-- 
2.20.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

Re: [igt-dev] [PATCH i-g-t 3/3] tools: Allow user to set poll delay in i915 perf recorder

[Lionel Landwerlin]

On 13/03/2020 21:53, Umesh Nerlige Ramappa wrote:
> Add poll delay parameter to the i915-perf-recorder tool so that the user
> can set the frequency of the poll timer that checks for available
> reports in the OA buffer.
>
> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>

Couple of nits below.

Either way :

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>


Thanks!

> ---
>   tools/i915-perf/i915_perf_recorder.c | 37 +++++++++++++++++++++++++---
>   1 file changed, 34 insertions(+), 3 deletions(-)
>
> diff --git a/tools/i915-perf/i915_perf_recorder.c b/tools/i915-perf/i915_perf_recorder.c
> index 6bbc451e..60b7b732 100644
> --- a/tools/i915-perf/i915_perf_recorder.c
> +++ b/tools/i915-perf/i915_perf_recorder.c
> @@ -353,14 +353,31 @@ struct recording_context {
>   
>   	const char *command_fifo;
>   	int command_fifo_fd;
> +
> +	uint32_t poll_delay;
Maybe just use a uint64_t as it's the type used by the kernel interface.
>   };
>   
> +static int
> +perf_revision(int drm_fd)
> +{
> +	drm_i915_getparam_t gp;
> +	int value = 1;
> +
> +	gp.param = I915_PARAM_PERF_REVISION;
> +	gp.value = &value;
> +	perf_ioctl(drm_fd, DRM_IOCTL_I915_GETPARAM, &gp);
> +
> +	return value;
> +}
> +
>   static int
>   perf_open(struct recording_context *ctx)
>   {
>   	uint64_t properties[DRM_I915_PERF_PROP_MAX * 2];
>   	struct drm_i915_perf_open_param param;
> -	int p = 0, stream_fd;
> +	int p = 0, stream_fd, revision;
> +
> +	revision = perf_revision(ctx->drm_fd);
>   
>   	properties[p++] = DRM_I915_PERF_PROP_SAMPLE_OA;
>   	properties[p++] = true;
> @@ -374,6 +391,11 @@ perf_open(struct recording_context *ctx)
>   	properties[p++] = DRM_I915_PERF_PROP_OA_EXPONENT;
>   	properties[p++] = ctx->oa_exponent;
>   
> +	if (revision >= 4) {
> +		properties[p++] = DRM_I915_PERF_PROP_POLL_OA_DELAY;
> +		properties[p++] = ctx->poll_delay;
> +	}
> +
>   	memset(&param, 0, sizeof(param));
>   	param.flags = 0;
>   	param.flags |= I915_PERF_FLAG_FD_CLOEXEC | I915_PERF_FLAG_FD_NONBLOCK;
> @@ -720,7 +742,10 @@ usage(const char *name)
>   		"                                       (To use with i915-perf-control)\n"
>   		"     --output,             -o <path>   Output file (default = i915_perf.record)\n"
>   		"     --cpu-clock,          -k <path>   Cpu clock to use for correlations\n"
> -		"                                       Values: boot, mono, mono_raw (default = mono)\n",
> +		"                                       Values: boot, mono, mono_raw (default = mono)\n"
> +		"     --poll-delay          -P <value>  Polling interval in microseconds used by a timer in the driver to query\n"
> +		"                                       for OA reports periodically\n"
> +		"                                       (default = 5000), Minimum = 100.\n",
>   		name);
>   }
>   
> @@ -762,6 +787,7 @@ main(int argc, char *argv[])
>   		{"size",                 required_argument, 0, 's'},
>   		{"command-fifo",         required_argument, 0, 'f'},
>   		{"cpu-clock",            required_argument, 0, 'k'},
> +		{"poll-delay",           required_argument, 0, 'P'},
>   		{0, 0, 0, 0}
>   	};
>   	const struct {
> @@ -788,9 +814,11 @@ main(int argc, char *argv[])
>   
>   		.command_fifo = I915_PERF_RECORD_FIFO_PATH,
>   		.command_fifo_fd = -1,
> +
> +		.poll_delay = 5 * 1000 * 1000,
>   	};
>   
> -	while ((opt = getopt_long(argc, argv, "hc:p:m:Co:s:f:k:", long_options, NULL)) != -1) {
> +	while ((opt = getopt_long(argc, argv, "hc:p:m:Co:s:f:k:P:", long_options, NULL)) != -1) {
>   		switch (opt) {
>   		case 'h':
>   			usage(argv[0]);
> @@ -832,6 +860,9 @@ main(int argc, char *argv[])
>   			}
>   			break;
>   		}
> +		case 'P':
> +			ctx.poll_delay = MAX(100, atoi(optarg)) * 1000;
atol() just to be sure?
> +			break;
>   		default:
>   			fprintf(stderr, "Internal error: "
>   				"unexpected getopt value: %d\n", opt);


_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] ✗ GitLab.Pipeline: warning for Test configurable poll delay in perf OA (rev2)

[Patchwork]

== Series Details ==

Series: Test configurable poll delay in perf OA (rev2)
URL   : https://patchwork.freedesktop.org/series/74655/
State : warning

== Summary ==

Did not get list of undocumented tests for this run, something is wrong!

Other than that, pipeline status: FAILED.

see https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/pipelines/120135 for the overview.

build:tests-debian-meson-mips has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/1941150):
  Running with gitlab-runner 12.5.0 (577f813d)
    on gst-gitlab-htz-runner2 sGiTXgBC
  section_start:1584361515:prepare_executor
  Using Docker executor with image registry.freedesktop.org/gfx-ci/igt-ci-tags/build-debian-mips:commit-2c9542abda7cdbd05b695c6287974c8f51cc2a55 ...
  Authenticating with credentials from job payload (GitLab Registry)
  Pulling docker image registry.freedesktop.org/gfx-ci/igt-ci-tags/build-debian-mips:commit-2c9542abda7cdbd05b695c6287974c8f51cc2a55 ...
  Using docker image sha256:20ce37ce0dd99e42a1a28192a10ddd453c0dc2ae3056621938b8ec4221e3cf3c for registry.freedesktop.org/gfx-ci/igt-ci-tags/build-debian-mips:commit-2c9542abda7cdbd05b695c6287974c8f51cc2a55 ...
  section_end:1584361518:prepare_executor
  section_start:1584361518:prepare_script
  Running on runner-sGiTXgBC-project-3185-concurrent-0 via gst-gitlab-htz-runner2...
  section_end:1584361520:prepare_script
  section_start:1584361520:get_sources
  section_end:1584361520:get_sources
  section_start:1584361520:upload_artifacts_on_failure
  section_end:1584361522:upload_artifacts_on_failure
  ERROR: Job failed (system failure): Error response from daemon: error creating overlay mount to /var/lib/docker/overlay2/945d3c854bf186a8f4d3e9c7ec964f6393595815de03e96745c2b99f42134acf/merged: device or resource busy (executor_docker.go:740:0s)

== Logs ==

For more details see: https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/pipelines/120135
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] ✓ Fi.CI.BAT: success for Test configurable poll delay in perf OA (rev2)

[Patchwork]

== Series Details ==

Series: Test configurable poll delay in perf OA (rev2)
URL   : https://patchwork.freedesktop.org/series/74655/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_8137 -> IGTPW_4304
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/index.html

Known issues
------------

  Here are the changes found in IGTPW_4304 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@i915_selftest@live@gem_contexts:
    - fi-cfl-8700k:       [PASS][1] -> [INCOMPLETE][2] ([i915#424])
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/fi-cfl-8700k/igt@i915_selftest@live@gem_contexts.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/fi-cfl-8700k/igt@i915_selftest@live@gem_contexts.html

  * igt@i915_selftest@live@hangcheck:
    - fi-icl-dsi:         [PASS][3] -> [INCOMPLETE][4] ([fdo#108569])
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/fi-icl-dsi/igt@i915_selftest@live@hangcheck.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/fi-icl-dsi/igt@i915_selftest@live@hangcheck.html

  
#### Possible fixes ####

  * igt@kms_chamelium@hdmi-hpd-fast:
    - fi-icl-u2:          [FAIL][5] ([i915#217]) -> [PASS][6]
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/fi-icl-u2/igt@kms_chamelium@hdmi-hpd-fast.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/fi-icl-u2/igt@kms_chamelium@hdmi-hpd-fast.html
    - fi-kbl-7500u:       [FAIL][7] ([i915#323]) -> [PASS][8]
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/fi-kbl-7500u/igt@kms_chamelium@hdmi-hpd-fast.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/fi-kbl-7500u/igt@kms_chamelium@hdmi-hpd-fast.html

  
  [fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
  [i915#217]: https://gitlab.freedesktop.org/drm/intel/issues/217
  [i915#323]: https://gitlab.freedesktop.org/drm/intel/issues/323
  [i915#424]: https://gitlab.freedesktop.org/drm/intel/issues/424


Participating hosts (48 -> 44)
------------------------------

  Additional (1): fi-tgl-dsi 
  Missing    (5): fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-byt-clapper fi-bdw-samus 


Build changes
-------------

  * CI: CI-20190529 -> None
  * IGT: IGT_5510 -> IGTPW_4304

  CI-20190529: 20190529
  CI_DRM_8137: 5786b5e77cc17a1b494b9bdf3c3f29eedc2e2e7d @ git://anongit.freedesktop.org/gfx-ci/linux
  IGTPW_4304: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/index.html
  IGT_5510: e100092d50105463f58db531fa953c70cc58bb10 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools



== Testlist changes ==

+igt@perf@blocking-parameterized
+igt@perf@polling-parameterized

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/index.html
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] ✗ Fi.CI.IGT: failure for Test configurable poll delay in perf OA (rev2)

[Patchwork]

== Series Details ==

Series: Test configurable poll delay in perf OA (rev2)
URL   : https://patchwork.freedesktop.org/series/74655/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_8137_full -> IGTPW_4304_full
====================================================

Summary
-------

  **FAILURE**

  Serious unknown changes coming with IGTPW_4304_full absolutely need to be
  verified manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in IGTPW_4304_full, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/index.html

Possible new issues
-------------------

  Here are the unknown changes that may have been introduced in IGTPW_4304_full:

### IGT changes ###

#### Possible regressions ####

  * igt@gem_ctx_shared@single-timeline:
    - shard-snb:          NOTRUN -> [FAIL][1]
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb2/igt@gem_ctx_shared@single-timeline.html
    - shard-hsw:          NOTRUN -> [FAIL][2]
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw2/igt@gem_ctx_shared@single-timeline.html

  * {igt@perf@blocking-parameterized} (NEW):
    - shard-iclb:         NOTRUN -> [SKIP][3] +1 similar issue
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb1/igt@perf@blocking-parameterized.html

  * {igt@perf@polling-parameterized} (NEW):
    - shard-tglb:         NOTRUN -> [SKIP][4] +1 similar issue
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb7/igt@perf@polling-parameterized.html

  * igt@perf_pmu@busy-no-semaphores-vcs0:
    - shard-apl:          [PASS][5] -> [FAIL][6]
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl4/igt@perf_pmu@busy-no-semaphores-vcs0.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl4/igt@perf_pmu@busy-no-semaphores-vcs0.html

  
New tests
---------

  New tests have been introduced between CI_DRM_8137_full and IGTPW_4304_full:

### New IGT tests (12) ###

  * igt@perf@blocking-parameterized:
    - Statuses : 7 skip(s)
    - Exec time: [0.0] s

  * igt@perf@polling-parameterized:
    - Statuses : 7 skip(s)
    - Exec time: [0.0] s

  * igt@sysfs_heartbeat_interval@idempotent:
    - Statuses :
    - Exec time: [None] s

  * igt@sysfs_heartbeat_interval@invalid:
    - Statuses :
    - Exec time: [None] s

  * igt@sysfs_heartbeat_interval@nopreempt:
    - Statuses :
    - Exec time: [None] s

  * igt@sysfs_heartbeat_interval@off:
    - Statuses :
    - Exec time: [None] s

  * igt@sysfs_heartbeat_interval@precise:
    - Statuses :
    - Exec time: [None] s

  * igt@sysfs_preempt_timeout@idempotent:
    - Statuses :
    - Exec time: [None] s

  * igt@sysfs_preempt_timeout@invalid:
    - Statuses :
    - Exec time: [None] s

  * igt@sysfs_timeslice_duration@duration:
    - Statuses :
    - Exec time: [None] s

  * igt@sysfs_timeslice_duration@idempotent:
    - Statuses :
    - Exec time: [None] s

  * igt@sysfs_timeslice_duration@timeout:
    - Statuses :
    - Exec time: [None] s

  

Known issues
------------

  Here are the changes found in IGTPW_4304_full that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@gem_ctx_persistence@close-replace-race:
    - shard-kbl:          [PASS][7] -> [INCOMPLETE][8] ([i915#1402])
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl6/igt@gem_ctx_persistence@close-replace-race.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl2/igt@gem_ctx_persistence@close-replace-race.html
    - shard-glk:          [PASS][9] -> [INCOMPLETE][10] ([i915#1402] / [i915#58] / [k.org#198133])
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk3/igt@gem_ctx_persistence@close-replace-race.html
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk5/igt@gem_ctx_persistence@close-replace-race.html

  * igt@gem_ctx_shared@exec-single-timeline-bsd:
    - shard-iclb:         [PASS][11] -> [SKIP][12] ([fdo#110841])
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb5/igt@gem_ctx_shared@exec-single-timeline-bsd.html
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb1/igt@gem_ctx_shared@exec-single-timeline-bsd.html

  * igt@gem_exec_schedule@implicit-both-bsd1:
    - shard-iclb:         [PASS][13] -> [SKIP][14] ([fdo#109276] / [i915#677])
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb4/igt@gem_exec_schedule@implicit-both-bsd1.html
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb6/igt@gem_exec_schedule@implicit-both-bsd1.html

  * igt@gem_exec_schedule@pi-userfault-bsd:
    - shard-iclb:         [PASS][15] -> [SKIP][16] ([i915#677])
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb7/igt@gem_exec_schedule@pi-userfault-bsd.html
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb2/igt@gem_exec_schedule@pi-userfault-bsd.html

  * igt@gem_exec_schedule@preempt-other-chain-bsd:
    - shard-iclb:         [PASS][17] -> [SKIP][18] ([fdo#112146]) +3 similar issues
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb6/igt@gem_exec_schedule@preempt-other-chain-bsd.html
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb2/igt@gem_exec_schedule@preempt-other-chain-bsd.html

  * igt@gem_userptr_blits@dmabuf-unsync:
    - shard-snb:          [PASS][19] -> [DMESG-WARN][20] ([fdo#111870] / [i915#478])
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb6/igt@gem_userptr_blits@dmabuf-unsync.html
   [20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb5/igt@gem_userptr_blits@dmabuf-unsync.html

  * igt@gem_workarounds@suspend-resume-fd:
    - shard-apl:          [PASS][21] -> [DMESG-WARN][22] ([i915#180])
   [21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl6/igt@gem_workarounds@suspend-resume-fd.html
   [22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl6/igt@gem_workarounds@suspend-resume-fd.html

  * igt@kms_frontbuffer_tracking@fbc-1p-primscrn-indfb-plflip-blt:
    - shard-snb:          [PASS][23] -> [SKIP][24] ([fdo#109271]) +1 similar issue
   [23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb5/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-indfb-plflip-blt.html
   [24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb6/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-indfb-plflip-blt.html

  * igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-indfb-msflip-blt:
    - shard-glk:          [PASS][25] -> [FAIL][26] ([i915#49])
   [25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk1/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-indfb-msflip-blt.html
   [26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk2/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-indfb-msflip-blt.html

  * igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes:
    - shard-kbl:          [PASS][27] -> [DMESG-WARN][28] ([i915#180]) +2 similar issues
   [27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl4/igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes.html
   [28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl2/igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes.html

  * igt@kms_plane_lowres@pipe-a-tiling-x:
    - shard-glk:          [PASS][29] -> [FAIL][30] ([i915#899])
   [29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk6/igt@kms_plane_lowres@pipe-a-tiling-x.html
   [30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk3/igt@kms_plane_lowres@pipe-a-tiling-x.html

  * igt@kms_psr@psr2_sprite_plane_move:
    - shard-iclb:         [PASS][31] -> [SKIP][32] ([fdo#109441]) +2 similar issues
   [31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html
   [32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb4/igt@kms_psr@psr2_sprite_plane_move.html

  * igt@kms_setmode@basic:
    - shard-glk:          [PASS][33] -> [FAIL][34] ([i915#31])
   [33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk2/igt@kms_setmode@basic.html
   [34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk1/igt@kms_setmode@basic.html
    - shard-kbl:          [PASS][35] -> [FAIL][36] ([i915#31])
   [35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl7/igt@kms_setmode@basic.html
   [36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl6/igt@kms_setmode@basic.html

  * igt@kms_vblank@pipe-d-ts-continuation-dpms-rpm:
    - shard-tglb:         [PASS][37] -> [SKIP][38] ([fdo#112015])
   [37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb8/igt@kms_vblank@pipe-d-ts-continuation-dpms-rpm.html
   [38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb7/igt@kms_vblank@pipe-d-ts-continuation-dpms-rpm.html

  * igt@perf_pmu@init-busy-vcs1:
    - shard-iclb:         [PASS][39] -> [SKIP][40] ([fdo#112080]) +6 similar issues
   [39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb1/igt@perf_pmu@init-busy-vcs1.html
   [40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb5/igt@perf_pmu@init-busy-vcs1.html

  * igt@prime_vgem@fence-wait-bsd2:
    - shard-iclb:         [PASS][41] -> [SKIP][42] ([fdo#109276]) +16 similar issues
   [41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb1/igt@prime_vgem@fence-wait-bsd2.html
   [42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb3/igt@prime_vgem@fence-wait-bsd2.html

  
#### Possible fixes ####

  * igt@gem_ctx_isolation@rcs0-s3:
    - shard-snb:          [FAIL][43] -> [PASS][44] +1 similar issue
   [43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb4/igt@gem_ctx_isolation@rcs0-s3.html
   [44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb2/igt@gem_ctx_isolation@rcs0-s3.html

  * igt@gem_ctx_isolation@vcs1-dirty-create:
    - shard-iclb:         [SKIP][45] ([fdo#112080]) -> [PASS][46] +11 similar issues
   [45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb6/igt@gem_ctx_isolation@vcs1-dirty-create.html
   [46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb4/igt@gem_ctx_isolation@vcs1-dirty-create.html

  * igt@gem_ctx_persistence@close-replace-race:
    - shard-tglb:         [INCOMPLETE][47] ([i915#1402]) -> [PASS][48]
   [47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb2/igt@gem_ctx_persistence@close-replace-race.html
   [48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb6/igt@gem_ctx_persistence@close-replace-race.html
    - shard-apl:          [INCOMPLETE][49] ([fdo#103927] / [i915#1402]) -> [PASS][50]
   [49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl1/igt@gem_ctx_persistence@close-replace-race.html
   [50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl2/igt@gem_ctx_persistence@close-replace-race.html

  * igt@gem_exec_balancer@smoke:
    - shard-iclb:         [SKIP][51] ([fdo#110854]) -> [PASS][52]
   [51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb8/igt@gem_exec_balancer@smoke.html
   [52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb1/igt@gem_exec_balancer@smoke.html

  * igt@gem_exec_parallel@bcs0-fds:
    - shard-apl:          [FAIL][53] -> [PASS][54]
   [53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl6/igt@gem_exec_parallel@bcs0-fds.html
   [54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl8/igt@gem_exec_parallel@bcs0-fds.html
    - shard-iclb:         [FAIL][55] -> [PASS][56]
   [55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb2/igt@gem_exec_parallel@bcs0-fds.html
   [56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb1/igt@gem_exec_parallel@bcs0-fds.html
    - shard-tglb:         [FAIL][57] -> [PASS][58]
   [57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb3/igt@gem_exec_parallel@bcs0-fds.html
   [58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb1/igt@gem_exec_parallel@bcs0-fds.html
    - shard-glk:          [FAIL][59] -> [PASS][60]
   [59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk8/igt@gem_exec_parallel@bcs0-fds.html
   [60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk9/igt@gem_exec_parallel@bcs0-fds.html

  * igt@gem_exec_schedule@implicit-read-write-bsd1:
    - shard-iclb:         [SKIP][61] ([fdo#109276] / [i915#677]) -> [PASS][62] +2 similar issues
   [61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb5/igt@gem_exec_schedule@implicit-read-write-bsd1.html
   [62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb2/igt@gem_exec_schedule@implicit-read-write-bsd1.html

  * igt@gem_exec_schedule@pi-distinct-iova-bsd:
    - shard-iclb:         [SKIP][63] ([i915#677]) -> [PASS][64] +1 similar issue
   [63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb1/igt@gem_exec_schedule@pi-distinct-iova-bsd.html
   [64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb3/igt@gem_exec_schedule@pi-distinct-iova-bsd.html

  * igt@gem_exec_schedule@preempt-contexts-bsd2:
    - shard-iclb:         [SKIP][65] ([fdo#109276]) -> [PASS][66] +17 similar issues
   [65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb8/igt@gem_exec_schedule@preempt-contexts-bsd2.html
   [66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb1/igt@gem_exec_schedule@preempt-contexts-bsd2.html

  * igt@gem_exec_schedule@preempt-hang-render:
    - shard-apl:          [SKIP][67] ([fdo#109271]) -> [PASS][68]
   [67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl6/igt@gem_exec_schedule@preempt-hang-render.html
   [68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl8/igt@gem_exec_schedule@preempt-hang-render.html
    - shard-glk:          [SKIP][69] ([fdo#109271]) -> [PASS][70] +1 similar issue
   [69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk8/igt@gem_exec_schedule@preempt-hang-render.html
   [70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk1/igt@gem_exec_schedule@preempt-hang-render.html
    - shard-iclb:         [SKIP][71] -> [PASS][72]
   [71]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb2/igt@gem_exec_schedule@preempt-hang-render.html
   [72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb4/igt@gem_exec_schedule@preempt-hang-render.html
    - shard-tglb:         [SKIP][73] -> [PASS][74]
   [73]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb3/igt@gem_exec_schedule@preempt-hang-render.html
   [74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb3/igt@gem_exec_schedule@preempt-hang-render.html
    - shard-kbl:          [SKIP][75] ([fdo#109271]) -> [PASS][76]
   [75]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl7/igt@gem_exec_schedule@preempt-hang-render.html
   [76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl3/igt@gem_exec_schedule@preempt-hang-render.html

  * igt@gem_exec_schedule@reorder-wide-bsd:
    - shard-iclb:         [SKIP][77] ([fdo#112146]) -> [PASS][78] +4 similar issues
   [77]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb2/igt@gem_exec_schedule@reorder-wide-bsd.html
   [78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb8/igt@gem_exec_schedule@reorder-wide-bsd.html

  * igt@gem_userptr_blits@sync-unmap-after-close:
    - shard-snb:          [DMESG-WARN][79] ([fdo#111870] / [i915#478]) -> [PASS][80]
   [79]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb5/igt@gem_userptr_blits@sync-unmap-after-close.html
   [80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb4/igt@gem_userptr_blits@sync-unmap-after-close.html

  * igt@gem_workarounds@suspend-resume-fd:
    - shard-kbl:          [DMESG-WARN][81] ([i915#180]) -> [PASS][82] +2 similar issues
   [81]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl2/igt@gem_workarounds@suspend-resume-fd.html
   [82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl4/igt@gem_workarounds@suspend-resume-fd.html

  * igt@i915_pm_dc@dc5-dpms:
    - shard-iclb:         [FAIL][83] ([i915#447]) -> [PASS][84]
   [83]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb3/igt@i915_pm_dc@dc5-dpms.html
   [84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb1/igt@i915_pm_dc@dc5-dpms.html

  * igt@i915_pm_rpm@system-suspend-devices:
    - shard-iclb:         [SKIP][85] ([i915#1316]) -> [PASS][86]
   [85]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb1/igt@i915_pm_rpm@system-suspend-devices.html
   [86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb6/igt@i915_pm_rpm@system-suspend-devices.html
    - shard-hsw:          [SKIP][87] ([fdo#109271]) -> [PASS][88]
   [87]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw4/igt@i915_pm_rpm@system-suspend-devices.html
   [88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw7/igt@i915_pm_rpm@system-suspend-devices.html
    - shard-tglb:         [SKIP][89] ([i915#1316]) -> [PASS][90]
   [89]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb6/igt@i915_pm_rpm@system-suspend-devices.html
   [90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb5/igt@i915_pm_rpm@system-suspend-devices.html

  * igt@i915_pm_rps@waitboost:
    - shard-tglb:         [FAIL][91] ([i915#413]) -> [PASS][92]
   [91]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb7/igt@i915_pm_rps@waitboost.html
   [92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb6/igt@i915_pm_rps@waitboost.html

  * igt@kms_cursor_legacy@2x-long-flip-vs-cursor-legacy:
    - shard-glk:          [FAIL][93] ([i915#72]) -> [PASS][94]
   [93]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk1/igt@kms_cursor_legacy@2x-long-flip-vs-cursor-legacy.html
   [94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk4/igt@kms_cursor_legacy@2x-long-flip-vs-cursor-legacy.html

  * igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render:
    - shard-kbl:          [FAIL][95] ([i915#49]) -> [PASS][96]
   [95]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl2/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render.html
   [96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl7/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render.html
    - shard-glk:          [FAIL][97] ([i915#49]) -> [PASS][98]
   [97]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk2/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render.html
   [98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk9/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render.html
    - shard-apl:          [FAIL][99] ([i915#49]) -> [PASS][100]
   [99]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl6/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render.html
   [100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl4/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render.html

  * igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
    - shard-snb:          [DMESG-WARN][101] ([i915#478]) -> [PASS][102]
   [101]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb6/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite.html
   [102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb4/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite.html

  * igt@kms_psr@psr2_no_drrs:
    - shard-iclb:         [SKIP][103] ([fdo#109441]) -> [PASS][104] +1 similar issue
   [103]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb8/igt@kms_psr@psr2_no_drrs.html
   [104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb2/igt@kms_psr@psr2_no_drrs.html

  * igt@kms_vblank@pipe-d-ts-continuation-modeset-hang:
    - shard-tglb:         [SKIP][105] ([fdo#112015]) -> [PASS][106]
   [105]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb3/igt@kms_vblank@pipe-d-ts-continuation-modeset-hang.html
   [106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb3/igt@kms_vblank@pipe-d-ts-continuation-modeset-hang.html

  * igt@perf_pmu@most-busy-idle-check-all-bcs0:
    - shard-hsw:          [FAIL][107] -> [PASS][108] +1 similar issue
   [107]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw5/igt@perf_pmu@most-busy-idle-check-all-bcs0.html
   [108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw7/igt@perf_pmu@most-busy-idle-check-all-bcs0.html

  
#### Warnings ####

  * igt@gem_userptr_blits@map-fixed-invalidate-busy@gtt:
    - shard-hsw:          [DMESG-WARN][109] ([fdo#110789] / [i915#478]) -> [DMESG-WARN][110] ([i915#478])
   [109]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw5/igt@gem_userptr_blits@map-fixed-invalidate-busy@gtt.html
   [110]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw2/igt@gem_userptr_blits@map-fixed-invalidate-busy@gtt.html

  * igt@i915_pm_dc@dc6-dpms:
    - shard-tglb:         [SKIP][111] ([i915#468]) -> [FAIL][112] ([i915#454])
   [111]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb2/igt@i915_pm_dc@dc6-dpms.html
   [112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb1/igt@i915_pm_dc@dc6-dpms.html

  * igt@runner@aborted:
    - shard-hsw:          ([FAIL][113], [FAIL][114], [FAIL][115], [FAIL][116], [FAIL][117], [FAIL][118], [FAIL][119], [FAIL][120]) ([fdo#111870]) -> ([FAIL][121], [FAIL][122], [FAIL][123], [FAIL][124], [FAIL][125], [FAIL][126], [FAIL][127]) ([fdo#109271] / [fdo#111870])
   [113]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw6/igt@runner@aborted.html
   [114]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw7/igt@runner@aborted.html
   [115]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw6/igt@runner@aborted.html
   [116]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw2/igt@runner@aborted.html
   [117]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw1/igt@runner@aborted.html
   [118]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw5/igt@runner@aborted.html
   [119]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw5/igt@runner@aborted.html
   [120]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw2/igt@runner@aborted.html
   [121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw6/igt@runner@aborted.html
   [122]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw2/igt@runner@aborted.html
   [123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw5/igt@runner@aborted.html
   [124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw2/igt@runner@aborted.html
   [125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw7/igt@runner@aborted.html
   [126]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw1/igt@runner@aborted.html
   [127]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw4/igt@runner@aborted.html
    - shard-kbl:          [FAIL][128] ([i915#92]) -> ([FAIL][129], [FAIL][130]) ([i915#1389] / [i915#1402] / [i915#92])
   [128]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl3/igt@runner@aborted.html
   [129]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl7/igt@runner@aborted.html
   [130]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl2/igt@runner@aborted.html
    - shard-apl:          ([FAIL][131], [FAIL][132]) ([fdo#103927] / [i915#1402]) -> [FAIL][133] ([fdo#103927])
   [131]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl3/igt@runner@aborted.html
   [132]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl1/igt@runner@aborted.html
   [133]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl4/igt@runner@aborted.html
    - shard-snb:          ([FAIL][134], [FAIL][135], [FAIL][136], [FAIL][137], [FAIL][138], [FAIL][139], [FAIL][140], [FAIL][141], [FAIL][142]) ([fdo#111870] / [i915#1077] / [i915#698]) -> ([FAIL][143], [FAIL][144], [FAIL][145], [FAIL][146], [FAIL][147], [FAIL][148], [FAIL][149], [FAIL][150]) ([fdo#111870] / [i915#1077])
   [134]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb4/igt@runner@aborted.html
   [135]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb5/igt@runner@aborted.html
   [136]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb4/igt@runner@aborted.html
   [137]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb4/igt@runner@aborted.html
   [138]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb4/igt@runner@aborted.html
   [139]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb5/igt@runner@aborted.html
   [140]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb2/igt@runner@aborted.html
   [141]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb5/igt@runner@aborted.html
   [142]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb6/igt@runner@aborted.html
   [143]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb6/igt@runner@aborted.html
   [144]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb5/igt@runner@aborted.html
   [145]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb4/igt@runner@aborted.html
   [146]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb5/igt@runner@aborted.html
   [147]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb4/igt@runner@aborted.html
   [148]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb2/igt@runner@aborted.html
   [149]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb6/igt@runner@aborted.html
   [150]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb4/igt@runner@aborted.html

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
  [fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
  [fdo#110789]: https://bugs.freedesktop.org/show_bug.cgi?id=110789
  [fdo#110841]: https://bugs.freedesktop.org/show_bug.cgi?id=110841
  [fdo#110854]: https://bugs.freedesktop.org/show_bug.cgi?id=110854
  [fdo#111870]: https://bugs.freedesktop.org/show_bug.cgi?id=111870
  [fdo#112015]: https://bugs.freedesktop.org/show_bug.cgi?id=112015
  [fdo#112080]: https://bugs.freedesktop.org/show_bug.cgi?id=112080
  [fdo#112146]: https://bugs.freedesktop.org/show_bug.cgi?id=112146
  [i915#1077]: https://gitlab.freedesktop.org/drm/intel/issues/1077
  [i915#1316]: https://gitlab.freedesktop.org/drm/intel/issues/1316
  [i915#1389]: https://gitlab.freedesktop.org/drm/intel/issues/1389
  [i915#1402]: https://gitlab.freedesktop.org/drm/intel/issues/1402
  [i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
  [i915#31]: https://gitlab.freedesktop.org/drm/intel/issues/31
  [i915#413]: https://gitlab.freedesktop.org/drm/intel/issues/413
  [i915#447]: https://gitlab.freedesktop.org/drm/intel/issues/447
  [i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
  [i915#468]: https://gitlab.freedesktop.org/drm/intel/issues/468
  [i915#478]: https://gitlab.freedesktop.org/drm/intel/issues/478
  [i915#49]: https://gitlab.freedesktop.org/drm/intel/issues/49
  [i915#58]: https://gitlab.freedesktop.org/drm/intel/issues/58
  [i915#677]: https://gitlab.freedesktop.org/drm/intel/issues/677
  [i915#698]: https://gitlab.freedesktop.org/drm/intel/issues/698
  [i915#72]: https://gitlab.freedesktop.org/drm/intel/issues/72
  [i915#899]: https://gitlab.freedesktop.org/drm/intel/issues/899
  [i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
  [k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133


Participating hosts (10 -> 8)
------------------------------

  Missing    (2): pig-skl-6260u pig-glk-j5005 


Build changes
-------------

  * CI: CI-20190529 -> None
  * IGT: IGT_5510 -> IGTPW_4304
  * Piglit: piglit_4509 -> None

  CI-20190529: 20190529
  CI_DRM_8137: 5786b5e77cc17a1b494b9bdf3c3f29eedc2e2e7d @ git://anongit.freedesktop.org/gfx-ci/linux
  IGTPW_4304: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/index.html
  IGT_5510: e100092d50105463f58db531fa953c70cc58bb10 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/index.html
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

Re: [igt-dev] [PATCH i-g-t 2/3] tests/perf: new tests for parameterized OA buffer polling

[Dixit, Ashutosh]

On Thu, 19 Mar 2020 15:52:53 -0700, Umesh Nerlige Ramappa wrote:
>
> From: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
>
> 2 new tests verifying that the OA buffer is properly checked at the
> frequency specified by userspace.
>
> v2: (Umesh)
> - Capture start_times in test_polling
> - Second parameterized test used a 500us hrtimer. Occassionally, this
>   timing does not fall within the duration/100 requirement for the time
>   spent in kernel. Change this value to 2ms to accommodate all
>   platforms.
>
> v3: (Lionel)
> - Use NUM_PROPERTIES
>
> v4: (Umesh)
> - Update poll parameter name
> - Update perf revision check to 5 in new tests
> - Fix oa sampling rate message in igt_debug prints

Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>

> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
> ---
>  tests/perf.c | 144 +++++++++++++++++++++++++++++++++++++--------------
>  1 file changed, 106 insertions(+), 38 deletions(-)
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] [PATCH i-g-t 2/3] tests/perf: new tests for parameterized OA buffer polling

[Umesh Nerlige Ramappa]

From: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

2 new tests verifying that the OA buffer is properly checked at the
frequency specified by userspace.

v2: (Umesh)
- Capture start_times in test_polling
- Second parameterized test used a 500us hrtimer. Occassionally, this
  timing does not fall within the duration/100 requirement for the time
  spent in kernel. Change this value to 2ms to accommodate all
  platforms.

v3: (Lionel)
- Use NUM_PROPERTIES

v4: (Umesh)
- Update poll parameter name
- Update perf revision check to 5 in new tests
- Fix oa sampling rate message in igt_debug prints

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
---
 tests/perf.c | 144 +++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 106 insertions(+), 38 deletions(-)

diff --git a/tests/perf.c b/tests/perf.c
index 724f6f80..8f6537d6 100644
--- a/tests/perf.c
+++ b/tests/perf.c
@@ -234,6 +234,24 @@ get_oa_format(enum drm_i915_oa_format format)
 		return gen8_oa_formats[format];
 }
 
+static char *
+pretty_print_oa_period(uint64_t oa_period_ns)
+{
+	static char result[100];
+	static const char *units[4] = { "ns", "us", "ms", "s" };
+	double val = oa_period_ns;
+	int iter = 0;
+
+	while (iter < (ARRAY_SIZE(units) - 1) &&
+	       val >= 1000.0f) {
+		val /= 1000.0f;
+		iter++;
+	}
+
+	snprintf(result, sizeof(result), "%.3f%s", val, units[iter]);
+	return result;
+}
+
 static void
 __perf_close(int fd)
 {
@@ -1921,15 +1939,9 @@ get_time(void)
  * kernelspace.
  */
 static void
-test_blocking(void)
+test_blocking(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t kernel_hrtimer)
 {
-	/* ~40 milliseconds
-	 *
-	 * Having a period somewhat > sysconf(_SC_CLK_TCK) helps to stop
-	 * scheduling (liable to kick in when we make blocking poll()s/reads)
-	 * from interfering with the test.
-	 */
-	int oa_exponent = max_oa_exponent_for_period_lte(40000000);
+	int oa_exponent = max_oa_exponent_for_period_lte(requested_oa_period);
 	uint64_t oa_period = oa_exponent_to_ns(oa_exponent);
 	uint64_t properties[] = {
 		/* Include OA reports in samples */
@@ -1939,11 +1951,16 @@ test_blocking(void)
 		DRM_I915_PERF_PROP_OA_METRICS_SET, test_set->perf_oa_metrics_set,
 		DRM_I915_PERF_PROP_OA_FORMAT, test_set->perf_oa_format,
 		DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
+
+		/* Kernel configuration (optional) */
+		DRM_I915_PERF_PROP_POLL_OA_PERIOD, kernel_hrtimer,
 	};
 	struct drm_i915_perf_open_param param = {
 		.flags = I915_PERF_FLAG_FD_CLOEXEC |
 			I915_PERF_FLAG_DISABLED,
-		.num_properties = sizeof(properties) / 16,
+		.num_properties = set_kernel_hrtimer ?
+				  NUM_PROPERTIES(properties) :
+				  NUM_PROPERTIES(properties) - 1,
 		.properties_ptr = to_user_pointer(properties),
 	};
 	uint8_t buf[1024 * 1024];
@@ -1965,7 +1982,7 @@ test_blocking(void)
 	 * the knowledge that that the driver uses a 200Hz hrtimer (5ms period)
 	 * to check for data and giving some time to read().
 	 */
-	int min_iterations = (test_duration_ns / (oa_period + 6000000ull));
+	int min_iterations = (test_duration_ns / (oa_period + kernel_hrtimer + kernel_hrtimer / 5));
 
 	int64_t start, end;
 	int n = 0;
@@ -1975,9 +1992,10 @@ test_blocking(void)
 	times(&start_times);
 
 	igt_debug("tick length = %dns, test duration = %"PRIu64"ns, min iter. = %d,"
-		  " estimated max iter. = %d, oa_period = %"PRIu64"ns\n",
+		  " estimated max iter. = %d, oa_period = %s\n",
 		  (int)tick_ns, test_duration_ns,
-		  min_iterations, max_iterations, oa_period);
+		  min_iterations, max_iterations,
+		  pretty_print_oa_period(oa_period));
 
 	/* In the loop we perform blocking polls while the HW is sampling at
 	 * ~25Hz, with the expectation that we spend most of our time blocked
@@ -2052,8 +2070,8 @@ test_blocking(void)
 	user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns;
 	kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns;
 
-	igt_debug("%d blocking reads during test with ~25Hz OA sampling (expect no more than %d)\n",
-		  n, max_iterations);
+	igt_debug("%d blocking reads during test with %lu Hz OA sampling (expect no more than %d)\n",
+		  n, NSEC_PER_SEC / oa_period, max_iterations);
 	igt_debug("%d extra iterations seen, not related to periodic sampling (e.g. context switches)\n",
 		  n_extra_iterations);
 	igt_debug("time in userspace = %"PRIu64"ns (+-%dns) (start utime = %d, end = %d)\n",
@@ -2079,15 +2097,9 @@ test_blocking(void)
 }
 
 static void
-test_polling(void)
+test_polling(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t kernel_hrtimer)
 {
-	/* ~40 milliseconds
-	 *
-	 * Having a period somewhat > sysconf(_SC_CLK_TCK) helps to stop
-	 * scheduling (liable to kick in when we make blocking poll()s/reads)
-	 * from interfering with the test.
-	 */
-	int oa_exponent = max_oa_exponent_for_period_lte(40000000);
+	int oa_exponent = max_oa_exponent_for_period_lte(requested_oa_period);
 	uint64_t oa_period = oa_exponent_to_ns(oa_exponent);
 	uint64_t properties[] = {
 		/* Include OA reports in samples */
@@ -2097,12 +2109,17 @@ test_polling(void)
 		DRM_I915_PERF_PROP_OA_METRICS_SET, test_set->perf_oa_metrics_set,
 		DRM_I915_PERF_PROP_OA_FORMAT, test_set->perf_oa_format,
 		DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
+
+		/* Kernel configuration (optional) */
+		DRM_I915_PERF_PROP_POLL_OA_PERIOD, kernel_hrtimer,
 	};
 	struct drm_i915_perf_open_param param = {
 		.flags = I915_PERF_FLAG_FD_CLOEXEC |
 			I915_PERF_FLAG_DISABLED |
 			I915_PERF_FLAG_FD_NONBLOCK,
-		.num_properties = sizeof(properties) / 16,
+		.num_properties = set_kernel_hrtimer ?
+				  NUM_PROPERTIES(properties) :
+				  NUM_PROPERTIES(properties) - 1,
 		.properties_ptr = to_user_pointer(properties),
 	};
 	uint8_t buf[1024 * 1024];
@@ -2116,15 +2133,16 @@ test_polling(void)
 	int n_extra_iterations = 0;
 
 	/* It's a bit tricky to put a lower limit here, but we expect a
-	 * relatively low latency for seeing reports, while we don't currently
-	 * give any control over this in the api.
+	 * relatively low latency for seeing reports.
 	 *
-	 * We assume a maximum latency of 6 millisecond to deliver a POLLIN and
-	 * read() after a new sample is written (46ms per iteration) considering
-	 * the knowledge that that the driver uses a 200Hz hrtimer (5ms period)
-	 * to check for data and giving some time to read().
+	 * We assume a maximum latency of kernel_hrtimer + some margin
+	 * to deliver a POLLIN and read() after a new sample is
+	 * written (40ms + hrtimer + margin per iteration) considering
+	 * the knowledge that that the driver uses a 200Hz hrtimer
+	 * (5ms period) to check for data and giving some time to
+	 * read().
 	 */
-	int min_iterations = (test_duration_ns / (oa_period + 6000000ull));
+	int min_iterations = (test_duration_ns / (oa_period + (kernel_hrtimer + kernel_hrtimer / 5)));
 	int64_t start, end;
 	int n = 0;
 
@@ -2132,8 +2150,9 @@ test_polling(void)
 
 	times(&start_times);
 
-	igt_debug("tick length = %dns, test duration = %"PRIu64"ns, min iter. = %d, max iter. = %d\n",
-		  (int)tick_ns, test_duration_ns,
+	igt_debug("tick length = %dns, oa period = %s, "
+		  "test duration = %"PRIu64"ns, min iter. = %d, max iter. = %d\n",
+		  (int)tick_ns, pretty_print_oa_period(oa_period), test_duration_ns,
 		  min_iterations, max_iterations);
 
 	/* In the loop we perform blocking polls while the HW is sampling at
@@ -2239,8 +2258,8 @@ test_polling(void)
 	user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns;
 	kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns;
 
-	igt_debug("%d blocking reads during test with ~25Hz OA sampling (expect no more than %d)\n",
-		  n, max_iterations);
+	igt_debug("%d non-blocking reads during test with %lu Hz OA sampling (expect no more than %d)\n",
+		  n, NSEC_PER_SEC / oa_period, max_iterations);
 	igt_debug("%d extra iterations seen, not related to periodic sampling (e.g. context switches)\n",
 		  n_extra_iterations);
 	igt_debug("time in userspace = %"PRIu64"ns (+-%dns) (start utime = %d, end = %d)\n",
@@ -4588,6 +4607,23 @@ test_sysctl_defaults(void)
 	igt_assert_eq(max_freq, 100000);
 }
 
+static int i915_perf_revision(int fd)
+{
+	drm_i915_getparam_t gp;
+	int value = 1, ret;
+
+	gp.param = I915_PARAM_PERF_REVISION;
+	gp.value = &value;
+	ret = igt_ioctl(drm_fd, DRM_IOCTL_I915_GETPARAM, &gp);
+	if (ret == -1) {
+		/* If the param is missing, consider version 1. */
+		igt_assert_eq(errno, EINVAL);
+		return 1;
+	}
+
+	return value;
+}
+
 igt_main
 {
 	igt_fixture {
@@ -4670,11 +4706,43 @@ igt_main
 	igt_subtest("enable-disable")
 		test_enable_disable();
 
-	igt_subtest("blocking")
-		test_blocking();
+	igt_describe("Test blocking read with default hrtimer frequency");
+	igt_subtest("blocking") {
+		test_blocking(40 * 1000 * 1000 /* 40ms oa period */,
+			      false /* set_kernel_hrtimer */,
+			      5 * 1000 * 1000 /* default 5ms/200Hz hrtimer */);
+	}
+
+	igt_describe("Test blocking read with different hrtimer frequencies");
+	igt_subtest("blocking-parameterized") {
+		igt_require(i915_perf_revision(drm_fd) >= 5);
+
+		test_blocking(10 * 1000 * 1000 /* 10ms oa period */,
+			      true /* set_kernel_hrtimer */,
+			      40 * 1000 * 1000 /* default 40ms hrtimer */);
+		test_blocking(500 * 1000 /* 500us oa period */,
+			      true /* set_kernel_hrtimer */,
+			      2 * 1000 * 1000 /* default 2ms hrtimer */);
+	}
 
-	igt_subtest("polling")
-		test_polling();
+	igt_describe("Test polled read with default hrtimer frequency");
+	igt_subtest("polling") {
+		test_polling(40 * 1000 * 1000 /* 40ms oa period */,
+			     false /* set_kernel_hrtimer */,
+			     5 * 1000 * 1000 /* default 5ms/200Hz hrtimer */);
+	}
+
+	igt_describe("Test polled read with different hrtimer frequencies");
+	igt_subtest("polling-parameterized") {
+		igt_require(i915_perf_revision(drm_fd) >= 5);
+
+		test_polling(10 * 1000 * 1000 /* 10ms oa period */,
+			     true /* set_kernel_hrtimer */,
+			     40 * 1000 * 1000 /* default 40ms hrtimer */);
+		test_polling(500 * 1000 /* 500us oa period */,
+			     true /* set_kernel_hrtimer */,
+			     2 * 1000 * 1000 /* default 2ms hrtimer */);
+	}
 
 	igt_subtest("short-reads")
 		test_short_reads();
-- 
2.20.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev