From: Lokesh Vutla <lokeshvutla@ti.com> To: Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>, Rob Herring <robh+dt@kernel.org> Cc: <linux-kernel@vger.kernel.org>, Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>, Sekhar Nori <nsekhar@ti.com>, Kishon Vijay Abraham I <kishon@ti.com>, Suman Anna <s-anna@ti.com>, Grygorii Strashko <grygorii.strashko@ti.com>, Lokesh Vutla <lokeshvutla@ti.com> Subject: [PATCH 0/4] arm64: Initial support for Texas Instrument's J7200 Platform Date: Thu, 23 Jul 2020 14:16:24 +0530 [thread overview] Message-ID: <20200723084628.19241-1-lokeshvutla@ti.com> (raw) This series adds initial support for latest new SoC, J7200, from Texas Instruments. The J7200 SoC is a part of the K3 Multicore SoC architecture platform. It is targeted for for automotive gateway, vehicle compute systems, Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications. The SoC aims to meet the complex processing needs of modern embedded products. See J7200 Technical Reference Manual (SPRUIU1, June 2020) for further details: https://www.ti.com/lit/pdf/spruiu1 Testing: - Boot log: https://pastebin.ubuntu.com/p/FvpzWjf7tw/ - ./scripts/checkpatch --strict - Few warningns about Line length exceeding 100 columns. But these are corresponding to comments - v8make dtbs_check - DT_SCHEMA_FLAGS="-u" DT_SCHEMA_FILES="Documentation/devicetree/bindings/arm/ti/k3.yaml" v8make dtbs_check - DT_SCHEMA_FLAGS="-u" DT_SCHEMA_FILES="Documentation/devicetree/bindings/arm/ti/k3.yaml" v8make dt_binding_check Lokesh Vutla (4): dt-bindings: arm: ti: Add bindings for J7200 SoC dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema arm64: dts: ti: Add support for J7200 SoC arm64: dts: ti: Add support for J7200 Common Processor Board .../devicetree/bindings/arm/ti/k3.txt | 26 --- .../devicetree/bindings/arm/ti/k3.yaml | 28 +++ MAINTAINERS | 2 +- arch/arm64/boot/dts/ti/Makefile | 3 +- .../dts/ti/k3-j7200-common-proc-board.dts | 64 ++++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 199 ++++++++++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 84 ++++++++ arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 29 +++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 165 +++++++++++++++ 9 files changed, 572 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi -- 2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Lokesh Vutla <lokeshvutla@ti.com> To: Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>, Rob Herring <robh+dt@kernel.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com>, Lokesh Vutla <lokeshvutla@ti.com>, Sekhar Nori <nsekhar@ti.com>, linux-kernel@vger.kernel.org, Kishon Vijay Abraham I <kishon@ti.com>, Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org> Subject: [PATCH 0/4] arm64: Initial support for Texas Instrument's J7200 Platform Date: Thu, 23 Jul 2020 14:16:24 +0530 [thread overview] Message-ID: <20200723084628.19241-1-lokeshvutla@ti.com> (raw) This series adds initial support for latest new SoC, J7200, from Texas Instruments. The J7200 SoC is a part of the K3 Multicore SoC architecture platform. It is targeted for for automotive gateway, vehicle compute systems, Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications. The SoC aims to meet the complex processing needs of modern embedded products. See J7200 Technical Reference Manual (SPRUIU1, June 2020) for further details: https://www.ti.com/lit/pdf/spruiu1 Testing: - Boot log: https://pastebin.ubuntu.com/p/FvpzWjf7tw/ - ./scripts/checkpatch --strict - Few warningns about Line length exceeding 100 columns. But these are corresponding to comments - v8make dtbs_check - DT_SCHEMA_FLAGS="-u" DT_SCHEMA_FILES="Documentation/devicetree/bindings/arm/ti/k3.yaml" v8make dtbs_check - DT_SCHEMA_FLAGS="-u" DT_SCHEMA_FILES="Documentation/devicetree/bindings/arm/ti/k3.yaml" v8make dt_binding_check Lokesh Vutla (4): dt-bindings: arm: ti: Add bindings for J7200 SoC dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema arm64: dts: ti: Add support for J7200 SoC arm64: dts: ti: Add support for J7200 Common Processor Board .../devicetree/bindings/arm/ti/k3.txt | 26 --- .../devicetree/bindings/arm/ti/k3.yaml | 28 +++ MAINTAINERS | 2 +- arch/arm64/boot/dts/ti/Makefile | 3 +- .../dts/ti/k3-j7200-common-proc-board.dts | 64 ++++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 199 ++++++++++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 84 ++++++++ arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 29 +++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 165 +++++++++++++++ 9 files changed, 572 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi -- 2.27.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-07-23 8:46 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-23 8:46 Lokesh Vutla [this message] 2020-07-23 8:46 ` [PATCH 0/4] arm64: Initial support for Texas Instrument's J7200 Platform Lokesh Vutla 2020-07-23 8:46 ` [PATCH 1/4] dt-bindings: arm: ti: Add bindings for J7200 SoC Lokesh Vutla 2020-07-23 8:46 ` Lokesh Vutla 2020-08-27 0:23 ` Nishanth Menon 2020-08-27 0:23 ` Nishanth Menon 2020-08-27 4:40 ` Lokesh Vutla 2020-08-27 4:40 ` Lokesh Vutla 2020-07-23 8:46 ` [PATCH 2/4] dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema Lokesh Vutla 2020-07-23 8:46 ` Lokesh Vutla 2020-07-23 8:46 ` [PATCH 3/4] arm64: dts: ti: Add support for J7200 SoC Lokesh Vutla 2020-07-23 8:46 ` Lokesh Vutla 2020-07-23 20:39 ` Suman Anna 2020-07-23 20:39 ` Suman Anna 2020-07-28 19:16 ` Grygorii Strashko 2020-07-28 19:16 ` Grygorii Strashko 2020-07-28 19:50 ` Suman Anna 2020-07-28 19:50 ` Suman Anna 2020-07-23 8:46 ` [PATCH 4/4] arm64: dts: ti: Add support for J7200 Common Processor Board Lokesh Vutla 2020-07-23 8:46 ` Lokesh Vutla 2020-07-23 20:39 ` Suman Anna 2020-07-23 20:39 ` Suman Anna 2020-07-28 19:19 ` [PATCH 0/4] arm64: Initial support for Texas Instrument's J7200 Platform Grygorii Strashko 2020-07-28 19:19 ` Grygorii Strashko 2020-07-28 19:50 ` Grygorii Strashko 2020-07-28 19:50 ` Grygorii Strashko
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200723084628.19241-1-lokeshvutla@ti.com \ --to=lokeshvutla@ti.com \ --cc=grygorii.strashko@ti.com \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=nsekhar@ti.com \ --cc=robh+dt@kernel.org \ --cc=s-anna@ti.com \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.