From: Sam Ravnborg <sam@ravnborg.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>,
Rob Clark <robdclark@gmail.com>,
devicetree@vger.kernel.org,
Jernej Skrabec <jernej.skrabec@siol.net>,
Neil Armstrong <narmstrong@baylibre.com>,
linux-arm-msm@vger.kernel.org, Jonas Karlman <jonas@kwiboo.se>,
Emil Velikov <emil.l.velikov@gmail.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Andrzej Hajda <a.hajda@samsung.com>,
Rob Herring <robh+dt@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Subject: Re: [PATCH v6 0/3] Add LT9611 DSI to HDMI bridge
Date: Sun, 26 Jul 2020 17:05:15 +0200 [thread overview]
Message-ID: <20200726150515.GA2170375@ravnborg.org> (raw)
In-Reply-To: <20200723163442.1280414-1-vkoul@kernel.org>
Hi Vinod.
On Thu, Jul 23, 2020 at 10:04:39PM +0530, Vinod Koul wrote:
> Hi,
>
> This series adds driver and bindings for Lontium LT9611 bridge chip which
> takes MIPI DSI as input and HDMI as output.
>
> This chip can be found in 96boards RB3 platform [1] commonly called DB845c.
>
> [1]: https://www.96boards.org/product/rb3-platform/
>
> Changes in v6:
> - Drop msm/dsi patch as we need to get more bridges fixed before we add that
> - Bring back support for DRM_BRIDGE_ATTACH_NO_CONNECTOR not set, now driver
> supports both
> - Fix nits found by Sam
>
> Changes in v5:
> - make symbol static, reported by kbuild-bot
>
> Changes in v4:
> - Add msm/dsi patch to create connector and support DRM_BRIDGE_ATTACH_NO_CONNECTOR
> - Fix comments provided by Sam
>
> Changes in v3:
> - fix kbuild reported error
> - rebase on v5.8-rc1
>
> Changes in v2:
> - Add acks by Rob
> - Fix comments reported by Emil and rename the file to lontium-lt9611.c
> - Fix comments reported by Laurent on binding and driver
> - Add HDMI audio support
>
> Vinod Koul (3):
> dt-bindings: vendor-prefixes: Add Lontium vendor prefix
> dt-bindings: display: bridge: Add documentation for LT9611
> drm/bridge: Introduce LT9611 DSI to HDMI bridge
Fixed prototype for lt9611_bridge_mode_valid() and applied the
series to drm-misc-next.
Sam
>
> .../display/bridge/lontium,lt9611.yaml | 176 +++
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> drivers/gpu/drm/bridge/Kconfig | 13 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/lontium-lt9611.c | 1229 +++++++++++++++++
> 5 files changed, 1421 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> create mode 100644 drivers/gpu/drm/bridge/lontium-lt9611.c
>
> --
> 2.26.2
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Sam Ravnborg <sam@ravnborg.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: devicetree@vger.kernel.org,
Jernej Skrabec <jernej.skrabec@siol.net>,
Neil Armstrong <narmstrong@baylibre.com>,
David Airlie <airlied@linux.ie>,
linux-arm-msm@vger.kernel.org, Jonas Karlman <jonas@kwiboo.se>,
Emil Velikov <emil.l.velikov@gmail.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Andrzej Hajda <a.hajda@samsung.com>,
Rob Herring <robh+dt@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Subject: Re: [PATCH v6 0/3] Add LT9611 DSI to HDMI bridge
Date: Sun, 26 Jul 2020 17:05:15 +0200 [thread overview]
Message-ID: <20200726150515.GA2170375@ravnborg.org> (raw)
In-Reply-To: <20200723163442.1280414-1-vkoul@kernel.org>
Hi Vinod.
On Thu, Jul 23, 2020 at 10:04:39PM +0530, Vinod Koul wrote:
> Hi,
>
> This series adds driver and bindings for Lontium LT9611 bridge chip which
> takes MIPI DSI as input and HDMI as output.
>
> This chip can be found in 96boards RB3 platform [1] commonly called DB845c.
>
> [1]: https://www.96boards.org/product/rb3-platform/
>
> Changes in v6:
> - Drop msm/dsi patch as we need to get more bridges fixed before we add that
> - Bring back support for DRM_BRIDGE_ATTACH_NO_CONNECTOR not set, now driver
> supports both
> - Fix nits found by Sam
>
> Changes in v5:
> - make symbol static, reported by kbuild-bot
>
> Changes in v4:
> - Add msm/dsi patch to create connector and support DRM_BRIDGE_ATTACH_NO_CONNECTOR
> - Fix comments provided by Sam
>
> Changes in v3:
> - fix kbuild reported error
> - rebase on v5.8-rc1
>
> Changes in v2:
> - Add acks by Rob
> - Fix comments reported by Emil and rename the file to lontium-lt9611.c
> - Fix comments reported by Laurent on binding and driver
> - Add HDMI audio support
>
> Vinod Koul (3):
> dt-bindings: vendor-prefixes: Add Lontium vendor prefix
> dt-bindings: display: bridge: Add documentation for LT9611
> drm/bridge: Introduce LT9611 DSI to HDMI bridge
Fixed prototype for lt9611_bridge_mode_valid() and applied the
series to drm-misc-next.
Sam
>
> .../display/bridge/lontium,lt9611.yaml | 176 +++
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> drivers/gpu/drm/bridge/Kconfig | 13 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/lontium-lt9611.c | 1229 +++++++++++++++++
> 5 files changed, 1421 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> create mode 100644 drivers/gpu/drm/bridge/lontium-lt9611.c
>
> --
> 2.26.2
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-07-26 15:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-23 16:34 [PATCH v6 0/3] Add LT9611 DSI to HDMI bridge Vinod Koul
2020-07-23 16:34 ` Vinod Koul
2020-07-23 16:34 ` [PATCH v6 1/3] dt-bindings: vendor-prefixes: Add Lontium vendor prefix Vinod Koul
2020-07-23 16:34 ` Vinod Koul
2020-07-23 16:34 ` [PATCH v6 2/3] dt-bindings: display: bridge: Add documentation for LT9611 Vinod Koul
2020-07-23 16:34 ` Vinod Koul
2020-07-23 16:34 ` [PATCH v6 3/3] drm/bridge: Introduce LT9611 DSI to HDMI bridge Vinod Koul
2020-07-23 16:34 ` Vinod Koul
2020-07-26 15:05 ` Sam Ravnborg [this message]
2020-07-26 15:05 ` [PATCH v6 0/3] Add " Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200726150515.GA2170375@ravnborg.org \
--to=sam@ravnborg.org \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=airlied@linux.ie \
--cc=bjorn.andersson@linaro.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=emil.l.velikov@gmail.com \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=robdclark@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.