* [PATCH] mpt3sas: Add support for Non-secure Aero and Sea PCI IDs
@ 2020-07-30 8:28 Sreekanth Reddy
2020-08-13 2:39 ` Martin K. Petersen
0 siblings, 1 reply; 3+ messages in thread
From: Sreekanth Reddy @ 2020-07-30 8:28 UTC (permalink / raw)
To: martin.petersen
Cc: linux-scsi, suganath-prabu.subramani, sathya.prakash, Sreekanth Reddy
This patch will add support for Non-secure Aero & Sea adapters' PCI IDs.
Driver will throw an error message when a non-secure type controller
is detected. Purpose of this interface is to avoid interacting with
any firmware which is not secured/signed by Broadcom. Any tampering on
Firmware component will be detected by hardware and it will be
communicated to the driver to avoid any further interaction with
that component.
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 121 ++++++++++++++++++++++++++++++-----
1 file changed, 105 insertions(+), 16 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 08fc4b3..a19caf7 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -9889,6 +9889,34 @@ void mpt3sas_scsih_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc)
}
/**
+ * _scsih_get_shost_and_ioc - get shost and ioc
+ * and verify whether they are NULL or not
+ * @pdev: PCI device struct
+ * @shost: address of scsi host pointer
+ * @ioc: address of HBA adapter pointer
+ *
+ * Return zero if *shost and *ioc are not NULL otherwise return error number.
+ */
+static int
+_scsih_get_shost_and_ioc(struct pci_dev *pdev,
+ struct Scsi_Host **shost, struct MPT3SAS_ADAPTER **ioc)
+{
+ *shost = pci_get_drvdata(pdev);
+ if (*shost == NULL) {
+ dev_err(&pdev->dev, "pdev's driver data is null\n");
+ return -ENXIO;
+ }
+
+ *ioc = shost_priv(*shost);
+ if (*ioc == NULL) {
+ dev_err(&pdev->dev, "shost's private data is null\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+/**
* scsih_remove - detach and remove add host
* @pdev: PCI device struct
*
@@ -9896,8 +9924,8 @@ void mpt3sas_scsih_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc)
*/
static void scsih_remove(struct pci_dev *pdev)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+ struct Scsi_Host *shost;
+ struct MPT3SAS_ADAPTER *ioc;
struct _sas_port *mpt3sas_port, *next_port;
struct _raid_device *raid_device, *next;
struct MPT3SAS_TARGET *sas_target_priv_data;
@@ -9906,6 +9934,9 @@ static void scsih_remove(struct pci_dev *pdev)
unsigned long flags;
Mpi2ConfigReply_t mpi_reply;
+ if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc))
+ return;
+
ioc->remove_host = 1;
if (!pci_device_is_present(pdev))
@@ -9985,12 +10016,15 @@ static void scsih_remove(struct pci_dev *pdev)
static void
scsih_shutdown(struct pci_dev *pdev)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+ struct Scsi_Host *shost;
+ struct MPT3SAS_ADAPTER *ioc;
struct workqueue_struct *wq;
unsigned long flags;
Mpi2ConfigReply_t mpi_reply;
+ if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc))
+ return;
+
ioc->remove_host = 1;
if (!pci_device_is_present(pdev))
@@ -10560,6 +10594,10 @@ static void pcie_device_make_active(struct MPT3SAS_ADAPTER *ioc,
case MPI26_MFGPAGE_DEVID_HARD_SEC_3916:
case MPI26_MFGPAGE_DEVID_CFG_SEC_3816:
case MPI26_MFGPAGE_DEVID_HARD_SEC_3816:
+ case MPI26_MFGPAGE_DEVID_INVALID0_3916:
+ case MPI26_MFGPAGE_DEVID_INVALID1_3916:
+ case MPI26_MFGPAGE_DEVID_INVALID0_3816:
+ case MPI26_MFGPAGE_DEVID_INVALID1_3816:
return MPI26_VERSION;
}
return 0;
@@ -10649,6 +10687,20 @@ static void pcie_device_make_active(struct MPT3SAS_ADAPTER *ioc,
case MPI26_ATLAS_PCIe_SWITCH_DEVID:
ioc->is_gen35_ioc = 1;
break;
+ case MPI26_MFGPAGE_DEVID_INVALID0_3816:
+ case MPI26_MFGPAGE_DEVID_INVALID0_3916:
+ dev_err(&pdev->dev,
+ "HBA with DeviceId 0x%04x, sub VendorId 0x%04x, sub DeviceId 0x%04x is Invalid",
+ pdev->device, pdev->subsystem_vendor,
+ pdev->subsystem_device);
+ return 1;
+ case MPI26_MFGPAGE_DEVID_INVALID1_3816:
+ case MPI26_MFGPAGE_DEVID_INVALID1_3916:
+ dev_err(&pdev->dev,
+ "HBA with DeviceId 0x%04x, sub VendorId 0x%04x, sub DeviceId 0x%04x is Tampered",
+ pdev->device, pdev->subsystem_vendor,
+ pdev->subsystem_device);
+ return 1;
case MPI26_MFGPAGE_DEVID_CFG_SEC_3816:
case MPI26_MFGPAGE_DEVID_CFG_SEC_3916:
dev_info(&pdev->dev,
@@ -10840,9 +10892,14 @@ static void pcie_device_make_active(struct MPT3SAS_ADAPTER *ioc,
static int
scsih_suspend(struct pci_dev *pdev, pm_message_t state)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+ struct Scsi_Host *shost;
+ struct MPT3SAS_ADAPTER *ioc;
pci_power_t device_state;
+ int rc;
+
+ rc = _scsih_get_shost_and_ioc(pdev, &shost, &ioc);
+ if (rc)
+ return rc;
mpt3sas_base_stop_watchdog(ioc);
flush_scheduled_work();
@@ -10867,11 +10924,15 @@ static void pcie_device_make_active(struct MPT3SAS_ADAPTER *ioc,
static int
scsih_resume(struct pci_dev *pdev)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+ struct Scsi_Host *shost;
+ struct MPT3SAS_ADAPTER *ioc;
pci_power_t device_state = pdev->current_state;
int r;
+ r = _scsih_get_shost_and_ioc(pdev, &shost, &ioc);
+ if (r)
+ return r;
+
ioc_info(ioc, "pdev=0x%p, slot=%s, previous operating state [D%d]\n",
pdev, pci_name(pdev), device_state);
@@ -10902,8 +10963,11 @@ static void pcie_device_make_active(struct MPT3SAS_ADAPTER *ioc,
static pci_ers_result_t
scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+ struct Scsi_Host *shost;
+ struct MPT3SAS_ADAPTER *ioc;
+
+ if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc))
+ return PCI_ERS_RESULT_DISCONNECT;
ioc_info(ioc, "PCI error: detected callback, state(%d)!!\n", state);
@@ -10938,10 +11002,13 @@ static void pcie_device_make_active(struct MPT3SAS_ADAPTER *ioc,
static pci_ers_result_t
scsih_pci_slot_reset(struct pci_dev *pdev)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+ struct Scsi_Host *shost;
+ struct MPT3SAS_ADAPTER *ioc;
int rc;
+ if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc))
+ return PCI_ERS_RESULT_DISCONNECT;
+
ioc_info(ioc, "PCI error: slot reset callback!!\n");
ioc->pci_error_recovery = 0;
@@ -10974,8 +11041,11 @@ static void pcie_device_make_active(struct MPT3SAS_ADAPTER *ioc,
static void
scsih_pci_resume(struct pci_dev *pdev)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+ struct Scsi_Host *shost;
+ struct MPT3SAS_ADAPTER *ioc;
+
+ if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc))
+ return;
ioc_info(ioc, "PCI error: resume callback!!\n");
@@ -10990,8 +11060,11 @@ static void pcie_device_make_active(struct MPT3SAS_ADAPTER *ioc,
static pci_ers_result_t
scsih_pci_mmio_enabled(struct pci_dev *pdev)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+ struct Scsi_Host *shost;
+ struct MPT3SAS_ADAPTER *ioc;
+
+ if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc))
+ return PCI_ERS_RESULT_DISCONNECT;
ioc_info(ioc, "PCI error: mmio enabled callback!!\n");
@@ -11139,6 +11212,14 @@ bool scsih_ncq_prio_supp(struct scsi_device *sdev)
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_HARD_SEC_3916,
PCI_ANY_ID, PCI_ANY_ID },
+ /*
+ * Aero SI –> 0x00E0 Invalid, 0x00E3 Tampered
+ */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_INVALID0_3916,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_INVALID1_3916,
+ PCI_ANY_ID, PCI_ANY_ID },
+
/* Atlas PCIe Switch Management Port */
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_ATLAS_PCIe_SWITCH_DEVID,
PCI_ANY_ID, PCI_ANY_ID },
@@ -11151,6 +11232,14 @@ bool scsih_ncq_prio_supp(struct scsi_device *sdev)
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_HARD_SEC_3816,
PCI_ANY_ID, PCI_ANY_ID },
+ /*
+ * Sea SI –> 0x00E4 Invalid, 0x00E7 Tampered
+ */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_INVALID0_3816,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_INVALID1_3816,
+ PCI_ANY_ID, PCI_ANY_ID },
+
{0} /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, mpt3sas_pci_table);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] mpt3sas: Add support for Non-secure Aero and Sea PCI IDs
2020-07-30 8:28 [PATCH] mpt3sas: Add support for Non-secure Aero and Sea PCI IDs Sreekanth Reddy
@ 2020-08-13 2:39 ` Martin K. Petersen
2020-08-13 13:49 ` Sreekanth Reddy
0 siblings, 1 reply; 3+ messages in thread
From: Martin K. Petersen @ 2020-08-13 2:39 UTC (permalink / raw)
To: Sreekanth Reddy
Cc: martin.petersen, linux-scsi, suganath-prabu.subramani, sathya.prakash
Sreekanth,
> Driver will throw an error message when a non-secure type controller
> is detected. Purpose of this interface is to avoid interacting with
> any firmware which is not secured/signed by Broadcom.
Why not just print the warning?
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] mpt3sas: Add support for Non-secure Aero and Sea PCI IDs
2020-08-13 2:39 ` Martin K. Petersen
@ 2020-08-13 13:49 ` Sreekanth Reddy
0 siblings, 0 replies; 3+ messages in thread
From: Sreekanth Reddy @ 2020-08-13 13:49 UTC (permalink / raw)
To: Martin K. Petersen
Cc: linux-scsi, Suganath Prabu Subramani, Sathya Prakash Veerichetty
On Thu, Aug 13, 2020 at 8:09 AM Martin K. Petersen
<martin.petersen@oracle.com> wrote:
>
>
> Sreekanth,
>
> > Driver will throw an error message when a non-secure type controller
> > is detected. Purpose of this interface is to avoid interacting with
> > any firmware which is not secured/signed by Broadcom.
>
> Why not just print the warning?
Sure Martin, I will post the updated version patch with a warning message.
Thanks,
Sreekanth
>
> --
> Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-08-13 13:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-30 8:28 [PATCH] mpt3sas: Add support for Non-secure Aero and Sea PCI IDs Sreekanth Reddy
2020-08-13 2:39 ` Martin K. Petersen
2020-08-13 13:49 ` Sreekanth Reddy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.