From: John Crispin <john@phrozen.org> To: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org, ath11k@lists.infradead.org, John Crispin <john@phrozen.org> Subject: [PATCH V3 9/9] ath11k: set the multiple bssid hw flags and capabilities Date: Wed, 12 Aug 2020 17:00:50 +0200 [thread overview] Message-ID: <20200812150050.2683396-10-john@phrozen.org> (raw) In-Reply-To: <20200812150050.2683396-1-john@phrozen.org> This wraps up the support for multiple bssid and actually makes the feature available. Signed-off-by: John Crispin <john@phrozen.org> --- drivers/net/wireless/ath/ath11k/mac.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index 306f123c09a7..c4bd6b1a48c3 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -5999,19 +5999,23 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar, static const u8 ath11k_if_types_ext_capa[] = { [0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING, + [2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT, [7] = WLAN_EXT_CAPA8_OPMODE_NOTIF, }; static const u8 ath11k_if_types_ext_capa_sta[] = { [0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING, + [2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT, [7] = WLAN_EXT_CAPA8_OPMODE_NOTIF, [9] = WLAN_EXT_CAPA10_TWT_REQUESTER_SUPPORT, }; static const u8 ath11k_if_types_ext_capa_ap[] = { [0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING, + [2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT, [7] = WLAN_EXT_CAPA8_OPMODE_NOTIF, [9] = WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT, + [11] = WLAN_EXT_CAPA11_EMA_SUPPORT, }; static const struct wiphy_iftype_ext_capab ath11k_iftypes_ext_capa[] = { @@ -6121,6 +6125,8 @@ static int __ath11k_mac_register(struct ath11k *ar) ieee80211_hw_set(ar->hw, QUEUE_CONTROL); ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG); ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK); + ieee80211_hw_set(ar->hw, SUPPORTS_MULTI_BSSID); + ieee80211_hw_set(ar->hw, SUPPORTS_MULTI_BSSID_AP); if (ht_cap & WMI_HT_CAP_ENABLED) { ieee80211_hw_set(ar->hw, AMPDU_AGGREGATION); ieee80211_hw_set(ar->hw, TX_AMPDU_SETUP_IN_HW); -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: John Crispin <john@phrozen.org> To: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org, ath11k@lists.infradead.org, John Crispin <john@phrozen.org> Subject: [PATCH V3 9/9] ath11k: set the multiple bssid hw flags and capabilities Date: Wed, 12 Aug 2020 17:00:50 +0200 [thread overview] Message-ID: <20200812150050.2683396-10-john@phrozen.org> (raw) In-Reply-To: <20200812150050.2683396-1-john@phrozen.org> This wraps up the support for multiple bssid and actually makes the feature available. Signed-off-by: John Crispin <john@phrozen.org> --- drivers/net/wireless/ath/ath11k/mac.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index 306f123c09a7..c4bd6b1a48c3 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -5999,19 +5999,23 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar, static const u8 ath11k_if_types_ext_capa[] = { [0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING, + [2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT, [7] = WLAN_EXT_CAPA8_OPMODE_NOTIF, }; static const u8 ath11k_if_types_ext_capa_sta[] = { [0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING, + [2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT, [7] = WLAN_EXT_CAPA8_OPMODE_NOTIF, [9] = WLAN_EXT_CAPA10_TWT_REQUESTER_SUPPORT, }; static const u8 ath11k_if_types_ext_capa_ap[] = { [0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING, + [2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT, [7] = WLAN_EXT_CAPA8_OPMODE_NOTIF, [9] = WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT, + [11] = WLAN_EXT_CAPA11_EMA_SUPPORT, }; static const struct wiphy_iftype_ext_capab ath11k_iftypes_ext_capa[] = { @@ -6121,6 +6125,8 @@ static int __ath11k_mac_register(struct ath11k *ar) ieee80211_hw_set(ar->hw, QUEUE_CONTROL); ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG); ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK); + ieee80211_hw_set(ar->hw, SUPPORTS_MULTI_BSSID); + ieee80211_hw_set(ar->hw, SUPPORTS_MULTI_BSSID_AP); if (ht_cap & WMI_HT_CAP_ENABLED) { ieee80211_hw_set(ar->hw, AMPDU_AGGREGATION); ieee80211_hw_set(ar->hw, TX_AMPDU_SETUP_IN_HW); -- 2.25.1 -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2020-08-12 15:01 UTC|newest] Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-08-12 15:00 [PATCH V3 0/9] mac80211: add multiple bssid / EMA John Crispin 2020-08-12 15:00 ` John Crispin 2020-08-12 15:00 ` [PATCH V3 1/9] nl80211: add basic multiple bssid support John Crispin 2020-08-12 15:00 ` John Crispin 2020-08-19 2:48 ` Aloka Dixit 2020-08-19 2:48 ` Aloka Dixit 2020-08-19 4:32 ` John Crispin 2020-08-27 12:58 ` Johannes Berg 2020-08-27 12:58 ` Johannes Berg 2020-08-12 15:00 ` [PATCH V3 2/9] mac80211: add multiple bssid support to interface handling John Crispin 2020-08-12 15:00 ` John Crispin 2020-08-27 13:03 ` Johannes Berg 2020-08-27 13:03 ` Johannes Berg 2020-08-27 13:08 ` Johannes Berg 2020-08-27 13:08 ` Johannes Berg 2020-10-08 0:33 ` Pradeep Kumar Chitrapu 2020-10-08 0:33 ` Pradeep Kumar Chitrapu 2020-10-08 8:06 ` John Crispin 2020-10-08 8:06 ` John Crispin 2020-10-08 17:21 ` Pradeep Kumar Chitrapu 2020-10-08 17:21 ` Pradeep Kumar Chitrapu 2020-10-08 19:42 ` John Crispin 2020-10-08 19:42 ` John Crispin 2020-08-12 15:00 ` [PATCH V3 3/9] mac80211: add multiple bssid support to beacon handling John Crispin 2020-08-12 15:00 ` John Crispin 2020-08-12 15:00 ` [PATCH V3 4/9] mac80211: add multiple bssid/ema support to bcn templating John Crispin 2020-08-12 15:00 ` John Crispin 2020-08-27 13:10 ` Johannes Berg 2020-08-27 13:10 ` Johannes Berg 2020-08-28 3:20 ` Aloka Dixit 2020-08-28 3:20 ` Aloka Dixit 2020-08-12 15:00 ` [PATCH V3 5/9] ath11k: add a struct to pass parameters into ath11k_wmi_vdev_up John Crispin 2020-08-12 15:00 ` John Crispin 2020-08-12 15:00 ` [PATCH V3 6/9] ath11k: add the multiple bssid WMI commands John Crispin 2020-08-12 15:00 ` John Crispin 2020-08-12 15:00 ` [PATCH V3 7/9] ath11k: add multiple bssid support to device creation John Crispin 2020-08-12 15:00 ` John Crispin 2020-08-12 15:00 ` [PATCH V3 8/9] ath11k: add EMA beacon support John Crispin 2020-08-12 15:00 ` John Crispin 2020-08-12 15:00 ` John Crispin [this message] 2020-08-12 15:00 ` [PATCH V3 9/9] ath11k: set the multiple bssid hw flags and capabilities John Crispin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200812150050.2683396-10-john@phrozen.org \ --to=john@phrozen.org \ --cc=ath11k@lists.infradead.org \ --cc=johannes@sipsolutions.net \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.