* arm64: dts: sm8150: start populating qups @ 2021-03-10 16:31 Caleb Connolly 2021-03-10 16:31 ` [PATCH 1/3] arm64: dts: qcom: sm8150: add other QUP nodes Caleb Connolly ` (2 more replies) 0 siblings, 3 replies; 11+ messages in thread From: Caleb Connolly @ 2021-03-10 16:31 UTC (permalink / raw) To: caleb; +Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm The QUPs are rather sparse, lets add the zero-th and second qup nodes, the iommus properties for all of them and the i2c nodes. With this it's now possible to bringup the touchscreen on my device, and without crashing! Derived from OnePlus 7 Pro downstream kernel sources. *Caleb --- Of note, I'm only able to properly test i2c17, as that's what my touchscreen is attached to. Enabling i2c18 causes my device to lockup during probe, I suspect those pins are used for some other purpose on my device. Caleb Connolly (3): arm64: dts: qcom: sm8150: add other QUP nodes arm64: dts: qcom: sm8150: add iommus to qups arm64: dts: qcom: sm8150: add i2c nodes arch/arm64/boot/dts/qcom/sm8150.dtsi | 549 +++++++++++++++++++++++++++++++++++ 1 file changed, 549 insertions(+) ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 1/3] arm64: dts: qcom: sm8150: add other QUP nodes 2021-03-10 16:31 arm64: dts: sm8150: start populating qups Caleb Connolly @ 2021-03-10 16:31 ` Caleb Connolly 2021-03-15 19:17 ` Bhupesh Sharma 2021-03-10 16:31 ` [PATCH 2/3] arm64: dts: qcom: sm8150: add iommus to qups Caleb Connolly 2021-03-10 16:31 ` [PATCH 3/3] arm64: dts: qcom: sm8150: add i2c nodes Caleb Connolly 2 siblings, 1 reply; 11+ messages in thread From: Caleb Connolly @ 2021-03-10 16:31 UTC (permalink / raw) To: caleb, Andy Gross, Bjorn Andersson, Rob Herring Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm, devicetree, linux-kernel Add the first and third qupv3 nodes used to hook up peripherals on some devices. Signed-off-by: Caleb Connolly <caleb@connolly.tech> --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index e5bb17bc2f46..03e05d98daf2 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -577,6 +577,18 @@ gcc: clock-controller@100000 { <&sleep_clk>; }; + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; @@ -598,6 +610,19 @@ uart2: serial@a90000 { }; }; + qupv3_id_2: geniqup@cc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00cc0000 0x0 0x6000>; + + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + }; + config_noc: interconnect@1500000 { compatible = "qcom,sm8150-config-noc"; reg = <0 0x01500000 0 0x7400>; -- 2.29.2 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 1/3] arm64: dts: qcom: sm8150: add other QUP nodes 2021-03-10 16:31 ` [PATCH 1/3] arm64: dts: qcom: sm8150: add other QUP nodes Caleb Connolly @ 2021-03-15 19:17 ` Bhupesh Sharma 0 siblings, 0 replies; 11+ messages in thread From: Bhupesh Sharma @ 2021-03-15 19:17 UTC (permalink / raw) To: Caleb Connolly Cc: Andy Gross, Bjorn Andersson, Rob Herring, ~postmarketos/upstreaming, phone-devel, linux-arm-msm, devicetree, linux-kernel Hello Caleb, On Wed, 10 Mar 2021 at 22:02, Caleb Connolly <caleb@connolly.tech> wrote: > > Add the first and third qupv3 nodes used to hook > up peripherals on some devices. > > Signed-off-by: Caleb Connolly <caleb@connolly.tech> > --- > arch/arm64/boot/dts/qcom/sm8150.dtsi | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index e5bb17bc2f46..03e05d98daf2 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -577,6 +577,18 @@ gcc: clock-controller@100000 { > <&sleep_clk>; > }; > > + qupv3_id_0: geniqup@8c0000 { > + compatible = "qcom,geni-se-qup"; > + reg = <0x0 0x008c0000 0x0 0x6000>; > + clock-names = "m-ahb", "s-ahb"; > + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, > + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + status = "disabled"; > + }; > + > qupv3_id_1: geniqup@ac0000 { > compatible = "qcom,geni-se-qup"; > reg = <0x0 0x00ac0000 0x0 0x6000>; > @@ -598,6 +610,19 @@ uart2: serial@a90000 { > }; > }; > > + qupv3_id_2: geniqup@cc0000 { > + compatible = "qcom,geni-se-qup"; > + reg = <0x0 0x00cc0000 0x0 0x6000>; > + > + clock-names = "m-ahb", "s-ahb"; > + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, > + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + status = "disabled"; > + }; > + > config_noc: interconnect@1500000 { > compatible = "qcom,sm8150-config-noc"; > reg = <0 0x01500000 0 0x7400>; LGTM, so: Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 2/3] arm64: dts: qcom: sm8150: add iommus to qups 2021-03-10 16:31 arm64: dts: sm8150: start populating qups Caleb Connolly 2021-03-10 16:31 ` [PATCH 1/3] arm64: dts: qcom: sm8150: add other QUP nodes Caleb Connolly @ 2021-03-10 16:31 ` Caleb Connolly 2021-03-15 19:07 ` Bhupesh Sharma 2021-03-16 6:15 ` Vinod Koul 2021-03-10 16:31 ` [PATCH 3/3] arm64: dts: qcom: sm8150: add i2c nodes Caleb Connolly 2 siblings, 2 replies; 11+ messages in thread From: Caleb Connolly @ 2021-03-10 16:31 UTC (permalink / raw) To: caleb, Andy Gross, Bjorn Andersson, Rob Herring Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm, devicetree, linux-kernel Hook up the SMMU for doing DMA over i2c. Some peripherals like touchscreens easily exceed 32-bytes per transfer, causing errors and lockups without this. Signed-off-by: Caleb Connolly <caleb@connolly.tech> --- Fixes i2c on the OnePlus 7, without this touching the screen with more than 4 fingers causes the device to lock up and reboot. --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 03e05d98daf2..543417d74216 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -583,6 +583,7 @@ qupv3_id_0: geniqup@8c0000 { clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0xc3 0x0>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -595,6 +596,7 @@ qupv3_id_1: geniqup@ac0000 { clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x603 0x0>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -617,6 +619,7 @@ qupv3_id_2: geniqup@cc0000 { clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x7a3 0x0>; #address-cells = <2>; #size-cells = <2>; ranges; -- 2.29.2 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] arm64: dts: qcom: sm8150: add iommus to qups 2021-03-10 16:31 ` [PATCH 2/3] arm64: dts: qcom: sm8150: add iommus to qups Caleb Connolly @ 2021-03-15 19:07 ` Bhupesh Sharma 2021-03-16 6:15 ` Vinod Koul 1 sibling, 0 replies; 11+ messages in thread From: Bhupesh Sharma @ 2021-03-15 19:07 UTC (permalink / raw) To: Caleb Connolly Cc: Andy Gross, Bjorn Andersson, Rob Herring, ~postmarketos/upstreaming, phone-devel, linux-arm-msm, devicetree, linux-kernel Hello Caleb, Thanks for the patch. Some nitpicks inline: On Wed, 10 Mar 2021 at 22:02, Caleb Connolly <caleb@connolly.tech> wrote: > > Hook up the SMMU for doing DMA over i2c. Some peripherals like > touchscreens easily exceed 32-bytes per transfer, causing errors and > lockups without this. > > Signed-off-by: Caleb Connolly <caleb@connolly.tech> > --- > Fixes i2c on the OnePlus 7, without this touching the screen with more > than 4 fingers causes the device to lock up and reboot. > --- > arch/arm64/boot/dts/qcom/sm8150.dtsi | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index 03e05d98daf2..543417d74216 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -583,6 +583,7 @@ qupv3_id_0: geniqup@8c0000 { > clock-names = "m-ahb", "s-ahb"; > clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, > <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; > + iommus = <&apps_smmu 0xc3 0x0>; I think we also need to add the new iommu property to the binding documentation? <https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/soc/qcom/qcom%2Cgeni-se.yaml> Thanks, Bhupesh > #address-cells = <2>; > #size-cells = <2>; > ranges; > @@ -595,6 +596,7 @@ qupv3_id_1: geniqup@ac0000 { > clock-names = "m-ahb", "s-ahb"; > clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, > <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; > + iommus = <&apps_smmu 0x603 0x0>; > #address-cells = <2>; > #size-cells = <2>; > ranges; > @@ -617,6 +619,7 @@ qupv3_id_2: geniqup@cc0000 { > clock-names = "m-ahb", "s-ahb"; > clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, > <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; > + iommus = <&apps_smmu 0x7a3 0x0>; > #address-cells = <2>; > #size-cells = <2>; > ranges; > -- > 2.29.2 > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] arm64: dts: qcom: sm8150: add iommus to qups 2021-03-10 16:31 ` [PATCH 2/3] arm64: dts: qcom: sm8150: add iommus to qups Caleb Connolly 2021-03-15 19:07 ` Bhupesh Sharma @ 2021-03-16 6:15 ` Vinod Koul 2021-03-20 17:16 ` Caleb Connolly 1 sibling, 1 reply; 11+ messages in thread From: Vinod Koul @ 2021-03-16 6:15 UTC (permalink / raw) To: Caleb Connolly Cc: Andy Gross, Bjorn Andersson, Rob Herring, ~postmarketos/upstreaming, phone-devel, linux-arm-msm, devicetree, linux-kernel On 10-03-21, 16:31, Caleb Connolly wrote: > Hook up the SMMU for doing DMA over i2c. Some peripherals like > touchscreens easily exceed 32-bytes per transfer, causing errors and > lockups without this. Why not squash this to patch 1..? > > Signed-off-by: Caleb Connolly <caleb@connolly.tech> > --- > Fixes i2c on the OnePlus 7, without this touching the screen with more > than 4 fingers causes the device to lock up and reboot. > --- > arch/arm64/boot/dts/qcom/sm8150.dtsi | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index 03e05d98daf2..543417d74216 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -583,6 +583,7 @@ qupv3_id_0: geniqup@8c0000 { > clock-names = "m-ahb", "s-ahb"; > clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, > <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; > + iommus = <&apps_smmu 0xc3 0x0>; > #address-cells = <2>; > #size-cells = <2>; > ranges; > @@ -595,6 +596,7 @@ qupv3_id_1: geniqup@ac0000 { > clock-names = "m-ahb", "s-ahb"; > clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, > <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; > + iommus = <&apps_smmu 0x603 0x0>; > #address-cells = <2>; > #size-cells = <2>; > ranges; > @@ -617,6 +619,7 @@ qupv3_id_2: geniqup@cc0000 { > clock-names = "m-ahb", "s-ahb"; > clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, > <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; > + iommus = <&apps_smmu 0x7a3 0x0>; > #address-cells = <2>; > #size-cells = <2>; > ranges; > -- > 2.29.2 > -- ~Vinod ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] arm64: dts: qcom: sm8150: add iommus to qups 2021-03-16 6:15 ` Vinod Koul @ 2021-03-20 17:16 ` Caleb Connolly 2021-03-22 6:01 ` Vinod Koul 0 siblings, 1 reply; 11+ messages in thread From: Caleb Connolly @ 2021-03-20 17:16 UTC (permalink / raw) To: Vinod Koul Cc: Andy Gross, Bjorn Andersson, Rob Herring, ~postmarketos/upstreaming, phone-devel, linux-arm-msm, devicetree, linux-kernel Hi Vinod, On 16/03/2021 6:15 am, Vinod Koul wrote: > On 10-03-21, 16:31, Caleb Connolly wrote: >> Hook up the SMMU for doing DMA over i2c. Some peripherals like >> touchscreens easily exceed 32-bytes per transfer, causing errors and >> lockups without this. > Why not squash this to patch 1..? I thought it made more sense to separate these patches to keep the history a bit cleaner. I can squash them if you'd prefer. Caleb > >> Signed-off-by: Caleb Connolly <caleb@connolly.tech> >> --- >> Fixes i2c on the OnePlus 7, without this touching the screen with more >> than 4 fingers causes the device to lock up and reboot. >> --- >> arch/arm64/boot/dts/qcom/sm8150.dtsi | 3 +++ >> 1 file changed, 3 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi >> index 03e05d98daf2..543417d74216 100644 >> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi >> @@ -583,6 +583,7 @@ qupv3_id_0: geniqup@8c0000 { >> clock-names = "m-ahb", "s-ahb"; >> clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, >> <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; >> + iommus = <&apps_smmu 0xc3 0x0>; >> #address-cells = <2>; >> #size-cells = <2>; >> ranges; >> @@ -595,6 +596,7 @@ qupv3_id_1: geniqup@ac0000 { >> clock-names = "m-ahb", "s-ahb"; >> clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, >> <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; >> + iommus = <&apps_smmu 0x603 0x0>; >> #address-cells = <2>; >> #size-cells = <2>; >> ranges; >> @@ -617,6 +619,7 @@ qupv3_id_2: geniqup@cc0000 { >> clock-names = "m-ahb", "s-ahb"; >> clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, >> <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; >> + iommus = <&apps_smmu 0x7a3 0x0>; >> #address-cells = <2>; >> #size-cells = <2>; >> ranges; >> -- >> 2.29.2 >> > -- > ~Vinod ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] arm64: dts: qcom: sm8150: add iommus to qups 2021-03-20 17:16 ` Caleb Connolly @ 2021-03-22 6:01 ` Vinod Koul 0 siblings, 0 replies; 11+ messages in thread From: Vinod Koul @ 2021-03-22 6:01 UTC (permalink / raw) To: Caleb Connolly Cc: Andy Gross, Bjorn Andersson, Rob Herring, ~postmarketos/upstreaming, phone-devel, linux-arm-msm, devicetree, linux-kernel On 20-03-21, 17:16, Caleb Connolly wrote: > Hi Vinod, > > On 16/03/2021 6:15 am, Vinod Koul wrote: > > On 10-03-21, 16:31, Caleb Connolly wrote: > >> Hook up the SMMU for doing DMA over i2c. Some peripherals like > >> touchscreens easily exceed 32-bytes per transfer, causing errors and > >> lockups without this. > > Why not squash this to patch 1..? > > I thought it made more sense to separate these patches to keep the > history a bit cleaner. I can squash them if you'd prefer. The nodes should be typically added in a single patch, maybe Bjorn is fine with this ;-) -- ~Vinod ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 3/3] arm64: dts: qcom: sm8150: add i2c nodes 2021-03-10 16:31 arm64: dts: sm8150: start populating qups Caleb Connolly 2021-03-10 16:31 ` [PATCH 1/3] arm64: dts: qcom: sm8150: add other QUP nodes Caleb Connolly 2021-03-10 16:31 ` [PATCH 2/3] arm64: dts: qcom: sm8150: add iommus to qups Caleb Connolly @ 2021-03-10 16:31 ` Caleb Connolly 2021-03-15 19:16 ` Bhupesh Sharma 2021-03-16 6:16 ` Vinod Koul 2 siblings, 2 replies; 11+ messages in thread From: Caleb Connolly @ 2021-03-10 16:31 UTC (permalink / raw) To: caleb, Andy Gross, Bjorn Andersson, Rob Herring Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm, devicetree, linux-kernel Tested on the OnePlus 7 Pro (including DMA). Signed-off-by: Caleb Connolly <caleb@connolly.tech> --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 521 +++++++++++++++++++++++++++ 1 file changed, 521 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 543417d74216..0a38ad54c715 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -588,6 +588,111 @@ qupv3_id_0: geniqup@8c0000 { #size-cells = <2>; ranges; status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; qupv3_id_1: geniqup@ac0000 { @@ -602,6 +707,58 @@ qupv3_id_1: geniqup@ac0000 { ranges; status = "disabled"; + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart2: serial@a90000 { compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00a90000 0x0 0x4000>; @@ -610,6 +767,32 @@ uart2: serial@a90000 { interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0094000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; qupv3_id_2: geniqup@cc0000 { @@ -624,6 +807,84 @@ qupv3_id_2: geniqup@cc0000 { #size-cells = <2>; ranges; status = "disabled"; + + i2c17: i2c@c80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_default>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c18: i2c@c84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c18_default>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c19: i2c@c88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_default>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; + + i2c13: i2c@c8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@c90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@c94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; config_noc: interconnect@1500000 { @@ -947,6 +1208,266 @@ tlmm: pinctrl@3100000 { #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default { + mux { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + config { + pins = "gpio0", "gpio1"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c1_default: qup-i2c1-default { + mux { + pins = "gpio114", "gpio115"; + function = "qup1"; + }; + + config { + pins = "gpio114", "gpio115"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c2_default: qup-i2c2-default { + mux { + pins = "gpio126", "gpio127"; + function = "qup2"; + }; + + config { + pins = "gpio126", "gpio127"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c3_default: qup-i2c3-default { + mux { + pins = "gpio144", "gpio145"; + function = "qup3"; + }; + + config { + pins = "gpio144", "gpio145"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c4_default: qup-i2c4-default { + mux { + pins = "gpio51", "gpio52"; + function = "qup4"; + }; + + config { + pins = "gpio51", "gpio52"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c5_default: qup-i2c5-default { + mux { + pins = "gpio121", "gpio122"; + function = "qup5"; + }; + + config { + pins = "gpio121", "gpio122"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c6_default: qup-i2c6-default { + mux { + pins = "gpio6", "gpio7"; + function = "qup6"; + }; + + config { + pins = "gpio6", "gpio7"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + mux { + pins = "gpio98", "gpio99"; + function = "qup7"; + }; + + config { + pins = "gpio98", "gpio99"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + mux { + pins = "gpio88", "gpio89"; + function = "qup8"; + }; + + config { + pins = "gpio88", "gpio89"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + mux { + pins = "gpio39", "gpio40"; + function = "qup9"; + }; + + config { + pins = "gpio39", "gpio40"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + mux { + pins = "gpio9", "gpio10"; + function = "qup10"; + }; + + config { + pins = "gpio9", "gpio10"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + mux { + pins = "gpio94", "gpio95"; + function = "qup11"; + }; + + config { + pins = "gpio94", "gpio95"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c12_default: qup-i2c12-default { + mux { + pins = "gpio83", "gpio84"; + function = "qup12"; + }; + + config { + pins = "gpio83", "gpio84"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c13_default: qup-i2c13-default { + mux { + pins = "gpio43", "gpio44"; + function = "qup13"; + }; + + config { + pins = "gpio43", "gpio44"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c14_default: qup-i2c14-default { + mux { + pins = "gpio47", "gpio48"; + function = "qup14"; + }; + + config { + pins = "gpio47", "gpio48"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c15_default: qup-i2c15-default { + mux { + pins = "gpio27", "gpio28"; + function = "qup15"; + }; + + config { + pins = "gpio27", "gpio28"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c16_default: qup-i2c16-default { + mux { + pins = "gpio86", "gpio85"; + function = "qup16"; + }; + + config { + pins = "gpio86", "gpio85"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c17_default: qup-i2c17-default { + mux { + pins = "gpio55", "gpio56"; + function = "qup17"; + }; + + config { + pins = "gpio55", "gpio56"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c18_default: qup-i2c18-default { + mux { + pins = "gpio23", "gpio24"; + function = "qup18"; + }; + + config { + pins = "gpio23", "gpio24"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c19_default: qup-i2c19-default { + mux { + pins = "gpio57", "gpio58"; + function = "qup19"; + }; + + config { + pins = "gpio57", "gpio58"; + drive-strength = <0x02>; + bias-disable; + }; + }; }; remoteproc_mpss: remoteproc@4080000 { -- 2.29.2 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 3/3] arm64: dts: qcom: sm8150: add i2c nodes 2021-03-10 16:31 ` [PATCH 3/3] arm64: dts: qcom: sm8150: add i2c nodes Caleb Connolly @ 2021-03-15 19:16 ` Bhupesh Sharma 2021-03-16 6:16 ` Vinod Koul 1 sibling, 0 replies; 11+ messages in thread From: Bhupesh Sharma @ 2021-03-15 19:16 UTC (permalink / raw) To: Caleb Connolly Cc: Andy Gross, Bjorn Andersson, Rob Herring, ~postmarketos/upstreaming, phone-devel, linux-arm-msm, devicetree, linux-kernel Hi Caleb, Thanks for the patch. On Wed, 10 Mar 2021 at 22:02, Caleb Connolly <caleb@connolly.tech> wrote: > > Tested on the OnePlus 7 Pro (including DMA). > > Signed-off-by: Caleb Connolly <caleb@connolly.tech> > --- > arch/arm64/boot/dts/qcom/sm8150.dtsi | 521 +++++++++++++++++++++++++++ > 1 file changed, 521 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index 543417d74216..0a38ad54c715 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -588,6 +588,111 @@ qupv3_id_0: geniqup@8c0000 { > #size-cells = <2>; > ranges; > status = "disabled"; > + > + i2c0: i2c@880000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00880000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c0_default>; > + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@884000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00884000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c1_default>; > + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c2: i2c@888000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00888000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c2_default>; > + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c3: i2c@88c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x0088c000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c3_default>; > + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c4: i2c@890000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00890000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c4_default>; > + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c5: i2c@894000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00894000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c5_default>; > + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c6: i2c@898000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00898000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c6_default>; > + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c7: i2c@89c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x0089c000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c7_default>; > + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > }; > > qupv3_id_1: geniqup@ac0000 { > @@ -602,6 +707,58 @@ qupv3_id_1: geniqup@ac0000 { > ranges; > status = "disabled"; > > + i2c8: i2c@a80000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00a80000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c8_default>; > + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c9: i2c@a84000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00a84000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c9_default>; > + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c10: i2c@a88000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00a88000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c10_default>; > + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c11: i2c@a8c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00a8c000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c11_default>; > + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > uart2: serial@a90000 { > compatible = "qcom,geni-debug-uart"; > reg = <0x0 0x00a90000 0x0 0x4000>; > @@ -610,6 +767,32 @@ uart2: serial@a90000 { > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > status = "disabled"; > }; > + > + i2c12: i2c@a90000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00a90000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c12_default>; > + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c16: i2c@94000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x0094000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c16_default>; > + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > }; > > qupv3_id_2: geniqup@cc0000 { > @@ -624,6 +807,84 @@ qupv3_id_2: geniqup@cc0000 { > #size-cells = <2>; > ranges; > status = "disabled"; > + > + i2c17: i2c@c80000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00c80000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c17_default>; > + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c18: i2c@c84000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00c84000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c18_default>; > + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c19: i2c@c88000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00c88000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c19_default>; > + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + }; > + > + i2c13: i2c@c8c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00c8c000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c13_default>; > + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c14: i2c@c90000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00c90000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c14_default>; > + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c15: i2c@c94000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00c94000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c15_default>; > + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > }; > > config_noc: interconnect@1500000 { > @@ -947,6 +1208,266 @@ tlmm: pinctrl@3100000 { > #gpio-cells = <2>; > interrupt-controller; > #interrupt-cells = <2>; > + > + qup_i2c0_default: qup-i2c0-default { > + mux { > + pins = "gpio0", "gpio1"; > + function = "qup0"; > + }; > + > + config { > + pins = "gpio0", "gpio1"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c1_default: qup-i2c1-default { > + mux { > + pins = "gpio114", "gpio115"; > + function = "qup1"; > + }; > + > + config { > + pins = "gpio114", "gpio115"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c2_default: qup-i2c2-default { > + mux { > + pins = "gpio126", "gpio127"; > + function = "qup2"; > + }; > + > + config { > + pins = "gpio126", "gpio127"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c3_default: qup-i2c3-default { > + mux { > + pins = "gpio144", "gpio145"; > + function = "qup3"; > + }; > + > + config { > + pins = "gpio144", "gpio145"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c4_default: qup-i2c4-default { > + mux { > + pins = "gpio51", "gpio52"; > + function = "qup4"; > + }; > + > + config { > + pins = "gpio51", "gpio52"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c5_default: qup-i2c5-default { > + mux { > + pins = "gpio121", "gpio122"; > + function = "qup5"; > + }; > + > + config { > + pins = "gpio121", "gpio122"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c6_default: qup-i2c6-default { > + mux { > + pins = "gpio6", "gpio7"; > + function = "qup6"; > + }; > + > + config { > + pins = "gpio6", "gpio7"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c7_default: qup-i2c7-default { > + mux { > + pins = "gpio98", "gpio99"; > + function = "qup7"; > + }; > + > + config { > + pins = "gpio98", "gpio99"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c8_default: qup-i2c8-default { > + mux { > + pins = "gpio88", "gpio89"; > + function = "qup8"; > + }; > + > + config { > + pins = "gpio88", "gpio89"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c9_default: qup-i2c9-default { > + mux { > + pins = "gpio39", "gpio40"; > + function = "qup9"; > + }; > + > + config { > + pins = "gpio39", "gpio40"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c10_default: qup-i2c10-default { > + mux { > + pins = "gpio9", "gpio10"; > + function = "qup10"; > + }; > + > + config { > + pins = "gpio9", "gpio10"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c11_default: qup-i2c11-default { > + mux { > + pins = "gpio94", "gpio95"; > + function = "qup11"; > + }; > + > + config { > + pins = "gpio94", "gpio95"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c12_default: qup-i2c12-default { > + mux { > + pins = "gpio83", "gpio84"; > + function = "qup12"; > + }; > + > + config { > + pins = "gpio83", "gpio84"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c13_default: qup-i2c13-default { > + mux { > + pins = "gpio43", "gpio44"; > + function = "qup13"; > + }; > + > + config { > + pins = "gpio43", "gpio44"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c14_default: qup-i2c14-default { > + mux { > + pins = "gpio47", "gpio48"; > + function = "qup14"; > + }; > + > + config { > + pins = "gpio47", "gpio48"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c15_default: qup-i2c15-default { > + mux { > + pins = "gpio27", "gpio28"; > + function = "qup15"; > + }; > + > + config { > + pins = "gpio27", "gpio28"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c16_default: qup-i2c16-default { > + mux { > + pins = "gpio86", "gpio85"; > + function = "qup16"; > + }; > + > + config { > + pins = "gpio86", "gpio85"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c17_default: qup-i2c17-default { > + mux { > + pins = "gpio55", "gpio56"; > + function = "qup17"; > + }; > + > + config { > + pins = "gpio55", "gpio56"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c18_default: qup-i2c18-default { > + mux { > + pins = "gpio23", "gpio24"; > + function = "qup18"; > + }; > + > + config { > + pins = "gpio23", "gpio24"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c19_default: qup-i2c19-default { > + mux { > + pins = "gpio57", "gpio58"; > + function = "qup19"; > + }; > + > + config { > + pins = "gpio57", "gpio58"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > }; > > remoteproc_mpss: remoteproc@4080000 { LGTM, so: Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 3/3] arm64: dts: qcom: sm8150: add i2c nodes 2021-03-10 16:31 ` [PATCH 3/3] arm64: dts: qcom: sm8150: add i2c nodes Caleb Connolly 2021-03-15 19:16 ` Bhupesh Sharma @ 2021-03-16 6:16 ` Vinod Koul 1 sibling, 0 replies; 11+ messages in thread From: Vinod Koul @ 2021-03-16 6:16 UTC (permalink / raw) To: Caleb Connolly Cc: Andy Gross, Bjorn Andersson, Rob Herring, ~postmarketos/upstreaming, phone-devel, linux-arm-msm, devicetree, linux-kernel On 10-03-21, 16:31, Caleb Connolly wrote: > Tested on the OnePlus 7 Pro (including DMA). Lgtm: Reviewed-by: Vinod Koul <vkoul@kernel.org> But missing enabling nodes in board dts ..? > > Signed-off-by: Caleb Connolly <caleb@connolly.tech> > --- > arch/arm64/boot/dts/qcom/sm8150.dtsi | 521 +++++++++++++++++++++++++++ > 1 file changed, 521 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index 543417d74216..0a38ad54c715 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -588,6 +588,111 @@ qupv3_id_0: geniqup@8c0000 { > #size-cells = <2>; > ranges; > status = "disabled"; > + > + i2c0: i2c@880000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00880000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c0_default>; > + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@884000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00884000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c1_default>; > + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c2: i2c@888000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00888000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c2_default>; > + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c3: i2c@88c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x0088c000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c3_default>; > + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c4: i2c@890000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00890000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c4_default>; > + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c5: i2c@894000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00894000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c5_default>; > + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c6: i2c@898000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00898000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c6_default>; > + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c7: i2c@89c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x0089c000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c7_default>; > + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > }; > > qupv3_id_1: geniqup@ac0000 { > @@ -602,6 +707,58 @@ qupv3_id_1: geniqup@ac0000 { > ranges; > status = "disabled"; > > + i2c8: i2c@a80000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00a80000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c8_default>; > + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c9: i2c@a84000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00a84000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c9_default>; > + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c10: i2c@a88000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00a88000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c10_default>; > + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c11: i2c@a8c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00a8c000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c11_default>; > + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > uart2: serial@a90000 { > compatible = "qcom,geni-debug-uart"; > reg = <0x0 0x00a90000 0x0 0x4000>; > @@ -610,6 +767,32 @@ uart2: serial@a90000 { > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > status = "disabled"; > }; > + > + i2c12: i2c@a90000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00a90000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c12_default>; > + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c16: i2c@94000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x0094000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c16_default>; > + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > }; > > qupv3_id_2: geniqup@cc0000 { > @@ -624,6 +807,84 @@ qupv3_id_2: geniqup@cc0000 { > #size-cells = <2>; > ranges; > status = "disabled"; > + > + i2c17: i2c@c80000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00c80000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c17_default>; > + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c18: i2c@c84000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00c84000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c18_default>; > + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c19: i2c@c88000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00c88000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c19_default>; > + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + }; > + > + i2c13: i2c@c8c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00c8c000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c13_default>; > + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c14: i2c@c90000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00c90000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c14_default>; > + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c15: i2c@c94000 { > + compatible = "qcom,geni-i2c"; > + reg = <0 0x00c94000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_i2c15_default>; > + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > }; > > config_noc: interconnect@1500000 { > @@ -947,6 +1208,266 @@ tlmm: pinctrl@3100000 { > #gpio-cells = <2>; > interrupt-controller; > #interrupt-cells = <2>; > + > + qup_i2c0_default: qup-i2c0-default { > + mux { > + pins = "gpio0", "gpio1"; > + function = "qup0"; > + }; > + > + config { > + pins = "gpio0", "gpio1"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c1_default: qup-i2c1-default { > + mux { > + pins = "gpio114", "gpio115"; > + function = "qup1"; > + }; > + > + config { > + pins = "gpio114", "gpio115"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c2_default: qup-i2c2-default { > + mux { > + pins = "gpio126", "gpio127"; > + function = "qup2"; > + }; > + > + config { > + pins = "gpio126", "gpio127"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c3_default: qup-i2c3-default { > + mux { > + pins = "gpio144", "gpio145"; > + function = "qup3"; > + }; > + > + config { > + pins = "gpio144", "gpio145"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c4_default: qup-i2c4-default { > + mux { > + pins = "gpio51", "gpio52"; > + function = "qup4"; > + }; > + > + config { > + pins = "gpio51", "gpio52"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c5_default: qup-i2c5-default { > + mux { > + pins = "gpio121", "gpio122"; > + function = "qup5"; > + }; > + > + config { > + pins = "gpio121", "gpio122"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c6_default: qup-i2c6-default { > + mux { > + pins = "gpio6", "gpio7"; > + function = "qup6"; > + }; > + > + config { > + pins = "gpio6", "gpio7"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c7_default: qup-i2c7-default { > + mux { > + pins = "gpio98", "gpio99"; > + function = "qup7"; > + }; > + > + config { > + pins = "gpio98", "gpio99"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c8_default: qup-i2c8-default { > + mux { > + pins = "gpio88", "gpio89"; > + function = "qup8"; > + }; > + > + config { > + pins = "gpio88", "gpio89"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c9_default: qup-i2c9-default { > + mux { > + pins = "gpio39", "gpio40"; > + function = "qup9"; > + }; > + > + config { > + pins = "gpio39", "gpio40"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c10_default: qup-i2c10-default { > + mux { > + pins = "gpio9", "gpio10"; > + function = "qup10"; > + }; > + > + config { > + pins = "gpio9", "gpio10"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c11_default: qup-i2c11-default { > + mux { > + pins = "gpio94", "gpio95"; > + function = "qup11"; > + }; > + > + config { > + pins = "gpio94", "gpio95"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c12_default: qup-i2c12-default { > + mux { > + pins = "gpio83", "gpio84"; > + function = "qup12"; > + }; > + > + config { > + pins = "gpio83", "gpio84"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c13_default: qup-i2c13-default { > + mux { > + pins = "gpio43", "gpio44"; > + function = "qup13"; > + }; > + > + config { > + pins = "gpio43", "gpio44"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c14_default: qup-i2c14-default { > + mux { > + pins = "gpio47", "gpio48"; > + function = "qup14"; > + }; > + > + config { > + pins = "gpio47", "gpio48"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c15_default: qup-i2c15-default { > + mux { > + pins = "gpio27", "gpio28"; > + function = "qup15"; > + }; > + > + config { > + pins = "gpio27", "gpio28"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c16_default: qup-i2c16-default { > + mux { > + pins = "gpio86", "gpio85"; > + function = "qup16"; > + }; > + > + config { > + pins = "gpio86", "gpio85"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c17_default: qup-i2c17-default { > + mux { > + pins = "gpio55", "gpio56"; > + function = "qup17"; > + }; > + > + config { > + pins = "gpio55", "gpio56"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c18_default: qup-i2c18-default { > + mux { > + pins = "gpio23", "gpio24"; > + function = "qup18"; > + }; > + > + config { > + pins = "gpio23", "gpio24"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > + > + qup_i2c19_default: qup-i2c19-default { > + mux { > + pins = "gpio57", "gpio58"; > + function = "qup19"; > + }; > + > + config { > + pins = "gpio57", "gpio58"; > + drive-strength = <0x02>; > + bias-disable; > + }; > + }; > }; > > remoteproc_mpss: remoteproc@4080000 { > -- > 2.29.2 > -- ~Vinod ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2021-03-22 6:02 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-03-10 16:31 arm64: dts: sm8150: start populating qups Caleb Connolly 2021-03-10 16:31 ` [PATCH 1/3] arm64: dts: qcom: sm8150: add other QUP nodes Caleb Connolly 2021-03-15 19:17 ` Bhupesh Sharma 2021-03-10 16:31 ` [PATCH 2/3] arm64: dts: qcom: sm8150: add iommus to qups Caleb Connolly 2021-03-15 19:07 ` Bhupesh Sharma 2021-03-16 6:15 ` Vinod Koul 2021-03-20 17:16 ` Caleb Connolly 2021-03-22 6:01 ` Vinod Koul 2021-03-10 16:31 ` [PATCH 3/3] arm64: dts: qcom: sm8150: add i2c nodes Caleb Connolly 2021-03-15 19:16 ` Bhupesh Sharma 2021-03-16 6:16 ` Vinod Koul
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.