From: Miquel Raynal <miquel.raynal@bootlin.com> To: Rob Herring <robh+dt@kernel.org>, <devicetree@vger.kernel.org> Cc: Richard Weinberger <richard@nod.at>, Vignesh Raghavendra <vigneshr@ti.com>, Tudor Ambarus <Tudor.Ambarus@microchip.com>, <linux-mtd@lists.infradead.org>, Naga Sureshkumar Relli <nagasure@xilinx.com>, Michal Simek <monstr@monstr.eu>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Miquel Raynal <miquel.raynal@bootlin.com> Subject: [PATCH v2 2/5] mtd: rawnand: Move struct gpio_desc declaration to the top Date: Mon, 10 May 2021 12:40:48 +0200 [thread overview] Message-ID: <20210510104051.9701-3-miquel.raynal@bootlin.com> (raw) In-Reply-To: <20210510104051.9701-1-miquel.raynal@bootlin.com> The struct gpio_desc is declared in the middle of the rawnand.h header, right before the first function using it (nand_gpio_waitrdy). Before adding a new function and to make it clear: move the declaration to the top of the file. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- include/linux/mtd/rawnand.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index 29df2f43dcb5..93f5c0196a09 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -24,6 +24,7 @@ #include <linux/types.h> struct nand_chip; +struct gpio_desc; /* The maximum number of NAND chips in an array */ #define NAND_MAX_CHIPS 8 @@ -1413,7 +1414,6 @@ void nand_cleanup(struct nand_chip *chip); * instruction and have no physical pin to check it. */ int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms); -struct gpio_desc; int nand_gpio_waitrdy(struct nand_chip *chip, struct gpio_desc *gpiod, unsigned long timeout_ms); -- 2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com> To: Rob Herring <robh+dt@kernel.org>, <devicetree@vger.kernel.org> Cc: Richard Weinberger <richard@nod.at>, Vignesh Raghavendra <vigneshr@ti.com>, Tudor Ambarus <Tudor.Ambarus@microchip.com>, <linux-mtd@lists.infradead.org>, Naga Sureshkumar Relli <nagasure@xilinx.com>, Michal Simek <monstr@monstr.eu>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Miquel Raynal <miquel.raynal@bootlin.com> Subject: [PATCH v2 2/5] mtd: rawnand: Move struct gpio_desc declaration to the top Date: Mon, 10 May 2021 12:40:48 +0200 [thread overview] Message-ID: <20210510104051.9701-3-miquel.raynal@bootlin.com> (raw) In-Reply-To: <20210510104051.9701-1-miquel.raynal@bootlin.com> The struct gpio_desc is declared in the middle of the rawnand.h header, right before the first function using it (nand_gpio_waitrdy). Before adding a new function and to make it clear: move the declaration to the top of the file. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- include/linux/mtd/rawnand.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index 29df2f43dcb5..93f5c0196a09 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -24,6 +24,7 @@ #include <linux/types.h> struct nand_chip; +struct gpio_desc; /* The maximum number of NAND chips in an array */ #define NAND_MAX_CHIPS 8 @@ -1413,7 +1414,6 @@ void nand_cleanup(struct nand_chip *chip); * instruction and have no physical pin to check it. */ int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms); -struct gpio_desc; int nand_gpio_waitrdy(struct nand_chip *chip, struct gpio_desc *gpiod, unsigned long timeout_ms); -- 2.27.0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2021-05-10 10:42 UTC|newest] Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-10 10:40 [PATCH v2 0/5] Bring GPIO CS support to the Arasan controller driver Miquel Raynal 2021-05-10 10:40 ` Miquel Raynal 2021-05-10 10:40 ` [PATCH v2 1/5] dt-binding: mtd: nand: Document gpio-cs property Miquel Raynal 2021-05-10 10:40 ` Miquel Raynal 2021-05-10 16:51 ` Rob Herring 2021-05-10 16:51 ` Rob Herring 2021-05-10 17:00 ` Miquel Raynal 2021-05-10 17:00 ` Miquel Raynal 2021-05-10 10:40 ` Miquel Raynal [this message] 2021-05-10 10:40 ` [PATCH v2 2/5] mtd: rawnand: Move struct gpio_desc declaration to the top Miquel Raynal 2021-05-26 9:03 ` Miquel Raynal 2021-05-26 9:03 ` Miquel Raynal 2021-05-26 9:34 ` Miquel Raynal 2021-05-26 9:34 ` Miquel Raynal 2021-05-10 10:40 ` [PATCH v2 3/5] mtd: rawnand: Add a helper to parse the gpio-cs DT property Miquel Raynal 2021-05-10 10:40 ` Miquel Raynal 2021-05-26 9:03 ` Miquel Raynal 2021-05-26 9:03 ` Miquel Raynal 2021-05-10 10:40 ` [PATCH v2 4/5] mtd: rawnand: arasan: Ensure proper configuration for the asserted target Miquel Raynal 2021-05-10 10:40 ` Miquel Raynal 2021-05-26 9:03 ` Miquel Raynal 2021-05-26 9:03 ` Miquel Raynal 2021-05-10 10:40 ` [PATCH v2 5/5] mtd: rawnand: arasan: Leverage additional GPIO CS Miquel Raynal 2021-05-10 10:40 ` Miquel Raynal 2021-05-10 16:00 ` kernel test robot 2021-05-10 16:00 ` kernel test robot 2021-05-10 16:00 ` kernel test robot 2021-05-26 9:03 ` Miquel Raynal 2021-05-26 9:03 ` Miquel Raynal
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210510104051.9701-3-miquel.raynal@bootlin.com \ --to=miquel.raynal@bootlin.com \ --cc=Tudor.Ambarus@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-mtd@lists.infradead.org \ --cc=monstr@monstr.eu \ --cc=nagasure@xilinx.com \ --cc=richard@nod.at \ --cc=robh+dt@kernel.org \ --cc=thomas.petazzoni@bootlin.com \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.