All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>, Stephen Boyd <swboyd@chromium.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] phy: qmp: Provide unique clock names for DP clocks
Date: Wed, 21 Jul 2021 20:07:38 -0700	[thread overview]
Message-ID: <20210722030738.3385821-1-bjorn.andersson@linaro.org> (raw)

The USB/DP combo PHY exposes the "qmp_dp_phy_pll_link_clk" and
"qmp_dp_phy_pll_vco_div_clk" clocks, that are consumed by the display
clock controller. But for boards with multiple enabled QMP USB/DP combo
instances the hard coded names collides - and hence only the first
probed device is allowed to register.

Given that clocks are no longer reference globally by name and it's
possible to replace the hard coded names by something unique, but still
user friendly.

The two new clock names are based on dev_name() and results in names
such as "88ee000.phy::link_clk" and "88ee000.phy::vco_div_clk".

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index b7f2e36d7960..61707d99a9eb 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -5213,6 +5213,7 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
 {
 	struct clk_init_data init = { };
 	struct qmp_phy_dp_clks *dp_clks;
+	char name[64];
 	int ret;
 
 	dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
@@ -5222,15 +5223,17 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
 	dp_clks->qphy = qphy;
 	qphy->dp_clks = dp_clks;
 
+	snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
 	init.ops = &qcom_qmp_dp_link_clk_ops;
-	init.name = "qmp_dp_phy_pll_link_clk";
+	init.name = name;
 	dp_clks->dp_link_hw.init = &init;
 	ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
 	if (ret)
 		return ret;
 
+	snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev));
 	init.ops = &qcom_qmp_dp_pixel_clk_ops;
-	init.name = "qmp_dp_phy_pll_vco_div_clk";
+	init.name = name;
 	dp_clks->dp_pixel_hw.init = &init;
 	ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
 	if (ret)
-- 
2.29.2


WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>, Stephen Boyd <swboyd@chromium.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] phy: qmp: Provide unique clock names for DP clocks
Date: Wed, 21 Jul 2021 20:07:38 -0700	[thread overview]
Message-ID: <20210722030738.3385821-1-bjorn.andersson@linaro.org> (raw)

The USB/DP combo PHY exposes the "qmp_dp_phy_pll_link_clk" and
"qmp_dp_phy_pll_vco_div_clk" clocks, that are consumed by the display
clock controller. But for boards with multiple enabled QMP USB/DP combo
instances the hard coded names collides - and hence only the first
probed device is allowed to register.

Given that clocks are no longer reference globally by name and it's
possible to replace the hard coded names by something unique, but still
user friendly.

The two new clock names are based on dev_name() and results in names
such as "88ee000.phy::link_clk" and "88ee000.phy::vco_div_clk".

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index b7f2e36d7960..61707d99a9eb 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -5213,6 +5213,7 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
 {
 	struct clk_init_data init = { };
 	struct qmp_phy_dp_clks *dp_clks;
+	char name[64];
 	int ret;
 
 	dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
@@ -5222,15 +5223,17 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
 	dp_clks->qphy = qphy;
 	qphy->dp_clks = dp_clks;
 
+	snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
 	init.ops = &qcom_qmp_dp_link_clk_ops;
-	init.name = "qmp_dp_phy_pll_link_clk";
+	init.name = name;
 	dp_clks->dp_link_hw.init = &init;
 	ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
 	if (ret)
 		return ret;
 
+	snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev));
 	init.ops = &qcom_qmp_dp_pixel_clk_ops;
-	init.name = "qmp_dp_phy_pll_vco_div_clk";
+	init.name = name;
 	dp_clks->dp_pixel_hw.init = &init;
 	ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
 	if (ret)
-- 
2.29.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

             reply	other threads:[~2021-07-22  3:09 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-22  3:07 Bjorn Andersson [this message]
2021-07-22  3:07 ` [PATCH] phy: qmp: Provide unique clock names for DP clocks Bjorn Andersson
2021-07-22 19:31 ` Stephen Boyd
2021-07-22 19:31   ` Stephen Boyd
2021-08-06 11:44 ` Vinod Koul
2021-08-06 11:44   ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210722030738.3385821-1-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=swboyd@chromium.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.