From: Jouni Malinen <jouni@codeaurora.org> To: Kalle Valo <kvalo@codeaurora.org> Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org, Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>, Jouni Malinen <jouni@codeaurora.org> Subject: [PATCH 2/3] ath11k: fix packet drops due to incorrect 6 GHz freq value in rx status Date: Thu, 22 Jul 2021 13:20:53 +0300 [thread overview] Message-ID: <20210722102054.43419-2-jouni@codeaurora.org> (raw) In-Reply-To: <20210722102054.43419-1-jouni@codeaurora.org> From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Frequency in rx status is being filled incorrectly in the 6 GHz band as channel number received is invalid in this case which is causing packet drops. So fix that. Fixes: 5dcf42f8b79d ("ath11k: Use freq instead of channel number in rx path") Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> --- drivers/net/wireless/ath/ath11k/dp_rx.c | 9 ++++++--- drivers/net/wireless/ath/ath11k/wmi.c | 10 +++++++--- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c index 9d9af6d65afd..90da56316e7e 100644 --- a/drivers/net/wireless/ath/ath11k/dp_rx.c +++ b/drivers/net/wireless/ath/ath11k/dp_rx.c @@ -2393,8 +2393,10 @@ static void ath11k_dp_rx_h_ppdu(struct ath11k *ar, struct hal_rx_desc *rx_desc, channel_num = meta_data; center_freq = meta_data >> 16; - if (center_freq >= 5935 && center_freq <= 7105) { + if (center_freq >= ATH11K_MIN_6G_FREQ && + center_freq <= ATH11K_MAX_6G_FREQ) { rx_status->band = NL80211_BAND_6GHZ; + rx_status->freq = center_freq; } else if (channel_num >= 1 && channel_num <= 14) { rx_status->band = NL80211_BAND_2GHZ; } else if (channel_num >= 36 && channel_num <= 173) { @@ -2412,8 +2414,9 @@ static void ath11k_dp_rx_h_ppdu(struct ath11k *ar, struct hal_rx_desc *rx_desc, rx_desc, sizeof(struct hal_rx_desc)); } - rx_status->freq = ieee80211_channel_to_frequency(channel_num, - rx_status->band); + if (rx_status->band != NL80211_BAND_6GHZ) + rx_status->freq = ieee80211_channel_to_frequency(channel_num, + rx_status->band); ath11k_dp_rx_h_rate(ar, rx_desc, rx_status); } diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c index 5e196829ecf3..e7429d17030b 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.c +++ b/drivers/net/wireless/ath/ath11k/wmi.c @@ -6184,8 +6184,10 @@ static void ath11k_mgmt_rx_event(struct ath11k_base *ab, struct sk_buff *skb) if (rx_ev.status & WMI_RX_STATUS_ERR_MIC) status->flag |= RX_FLAG_MMIC_ERROR; - if (rx_ev.chan_freq >= ATH11K_MIN_6G_FREQ) { + if (rx_ev.chan_freq >= ATH11K_MIN_6G_FREQ && + rx_ev.chan_freq <= ATH11K_MAX_6G_FREQ) { status->band = NL80211_BAND_6GHZ; + status->freq = rx_ev.chan_freq; } else if (rx_ev.channel >= 1 && rx_ev.channel <= 14) { status->band = NL80211_BAND_2GHZ; } else if (rx_ev.channel >= 36 && rx_ev.channel <= ATH11K_MAX_5G_CHAN) { @@ -6206,8 +6208,10 @@ static void ath11k_mgmt_rx_event(struct ath11k_base *ab, struct sk_buff *skb) sband = &ar->mac.sbands[status->band]; - status->freq = ieee80211_channel_to_frequency(rx_ev.channel, - status->band); + if (status->band != NL80211_BAND_6GHZ) + status->freq = ieee80211_channel_to_frequency(rx_ev.channel, + status->band); + status->signal = rx_ev.snr + ATH11K_DEFAULT_NOISE_FLOOR; status->rate_idx = ath11k_mac_bitrate_to_idx(sband, rx_ev.rate / 100); -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jouni Malinen <jouni@codeaurora.org> To: Kalle Valo <kvalo@codeaurora.org> Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org, Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>, Jouni Malinen <jouni@codeaurora.org> Subject: [PATCH 2/3] ath11k: fix packet drops due to incorrect 6 GHz freq value in rx status Date: Thu, 22 Jul 2021 13:20:53 +0300 [thread overview] Message-ID: <20210722102054.43419-2-jouni@codeaurora.org> (raw) In-Reply-To: <20210722102054.43419-1-jouni@codeaurora.org> From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Frequency in rx status is being filled incorrectly in the 6 GHz band as channel number received is invalid in this case which is causing packet drops. So fix that. Fixes: 5dcf42f8b79d ("ath11k: Use freq instead of channel number in rx path") Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> --- drivers/net/wireless/ath/ath11k/dp_rx.c | 9 ++++++--- drivers/net/wireless/ath/ath11k/wmi.c | 10 +++++++--- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c index 9d9af6d65afd..90da56316e7e 100644 --- a/drivers/net/wireless/ath/ath11k/dp_rx.c +++ b/drivers/net/wireless/ath/ath11k/dp_rx.c @@ -2393,8 +2393,10 @@ static void ath11k_dp_rx_h_ppdu(struct ath11k *ar, struct hal_rx_desc *rx_desc, channel_num = meta_data; center_freq = meta_data >> 16; - if (center_freq >= 5935 && center_freq <= 7105) { + if (center_freq >= ATH11K_MIN_6G_FREQ && + center_freq <= ATH11K_MAX_6G_FREQ) { rx_status->band = NL80211_BAND_6GHZ; + rx_status->freq = center_freq; } else if (channel_num >= 1 && channel_num <= 14) { rx_status->band = NL80211_BAND_2GHZ; } else if (channel_num >= 36 && channel_num <= 173) { @@ -2412,8 +2414,9 @@ static void ath11k_dp_rx_h_ppdu(struct ath11k *ar, struct hal_rx_desc *rx_desc, rx_desc, sizeof(struct hal_rx_desc)); } - rx_status->freq = ieee80211_channel_to_frequency(channel_num, - rx_status->band); + if (rx_status->band != NL80211_BAND_6GHZ) + rx_status->freq = ieee80211_channel_to_frequency(channel_num, + rx_status->band); ath11k_dp_rx_h_rate(ar, rx_desc, rx_status); } diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c index 5e196829ecf3..e7429d17030b 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.c +++ b/drivers/net/wireless/ath/ath11k/wmi.c @@ -6184,8 +6184,10 @@ static void ath11k_mgmt_rx_event(struct ath11k_base *ab, struct sk_buff *skb) if (rx_ev.status & WMI_RX_STATUS_ERR_MIC) status->flag |= RX_FLAG_MMIC_ERROR; - if (rx_ev.chan_freq >= ATH11K_MIN_6G_FREQ) { + if (rx_ev.chan_freq >= ATH11K_MIN_6G_FREQ && + rx_ev.chan_freq <= ATH11K_MAX_6G_FREQ) { status->band = NL80211_BAND_6GHZ; + status->freq = rx_ev.chan_freq; } else if (rx_ev.channel >= 1 && rx_ev.channel <= 14) { status->band = NL80211_BAND_2GHZ; } else if (rx_ev.channel >= 36 && rx_ev.channel <= ATH11K_MAX_5G_CHAN) { @@ -6206,8 +6208,10 @@ static void ath11k_mgmt_rx_event(struct ath11k_base *ab, struct sk_buff *skb) sband = &ar->mac.sbands[status->band]; - status->freq = ieee80211_channel_to_frequency(rx_ev.channel, - status->band); + if (status->band != NL80211_BAND_6GHZ) + status->freq = ieee80211_channel_to_frequency(rx_ev.channel, + status->band); + status->signal = rx_ev.snr + ATH11K_DEFAULT_NOISE_FLOOR; status->rate_idx = ath11k_mac_bitrate_to_idx(sband, rx_ev.rate / 100); -- 2.25.1 -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2021-07-22 10:21 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-22 10:20 [PATCH 1/3] ath11k: add channel 2 into 6 GHz channel list Jouni Malinen 2021-07-22 10:20 ` Jouni Malinen 2021-07-22 10:20 ` Jouni Malinen [this message] 2021-07-22 10:20 ` [PATCH 2/3] ath11k: fix packet drops due to incorrect 6 GHz freq value in rx status Jouni Malinen 2021-07-22 10:20 ` [PATCH 3/3] ath11k: fix survey dump collection in 6 GHz Jouni Malinen 2021-07-22 10:20 ` Jouni Malinen 2021-09-28 13:17 ` [PATCH 1/3] ath11k: add channel 2 into 6 GHz channel list Kalle Valo 2021-09-28 13:17 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210722102054.43419-2-jouni@codeaurora.org \ --to=jouni@codeaurora.org \ --cc=ath11k@lists.infradead.org \ --cc=kvalo@codeaurora.org \ --cc=linux-wireless@vger.kernel.org \ --cc=pradeepc@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.