From: Andre Przywara <andre.przywara@arm.com> To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Rob Herring <robh@kernel.org>, Icenowy Zheng <icenowy@aosc.io>, Samuel Holland <samuel@sholland.org>, linux-arm-kernel@lists.infradead.org, linux-sunxi@googlegroups.com, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, Ondrej Jirman <megous@megous.com>, devicetree@vger.kernel.org, Lee Jones <lee.jones@linaro.org> Subject: [PATCH v8 01/11] dt-bindings: mfd: axp20x: Add AXP305 compatible (plus optional IRQ) Date: Fri, 23 Jul 2021 16:38:28 +0100 [thread overview] Message-ID: <20210723153838.6785-2-andre.przywara@arm.com> (raw) In-Reply-To: <20210723153838.6785-1-andre.przywara@arm.com> The AXP305 PMIC used on many boards with the H616 SoC seems to be fully compatible to the AXP805 PMIC, so add the proper chain of compatible strings. Also at least on one board (Orangepi Zero2) there is no interrupt line connected to the CPU, so make the "interrupts" property optional. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/mfd/axp20x.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 4991a6415796..2b53dcc0ea61 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -26,10 +26,10 @@ Required properties: * "x-powers,axp803" * "x-powers,axp806" * "x-powers,axp805", "x-powers,axp806" + * "x-powers,axp305", "x-powers,axp805", "x-powers,axp806" * "x-powers,axp809" * "x-powers,axp813" - reg: The I2C slave address or RSB hardware address for the AXP chip -- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin - interrupt-controller: The PMIC has its own internal IRQs - #interrupt-cells: Should be set to 1 @@ -43,6 +43,7 @@ more information: AXP20x/LDO3: software-based implementation Optional properties: +- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz AXP152/20X: range: 750-1875, Default: 1.5 MHz AXP22X/8XX: range: 1800-4050, Default: 3 MHz -- 2.17.6
WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com> To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Rob Herring <robh@kernel.org>, Icenowy Zheng <icenowy@aosc.io>, Samuel Holland <samuel@sholland.org>, linux-arm-kernel@lists.infradead.org, linux-sunxi@googlegroups.com, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, Ondrej Jirman <megous@megous.com>, devicetree@vger.kernel.org, Lee Jones <lee.jones@linaro.org> Subject: [PATCH v8 01/11] dt-bindings: mfd: axp20x: Add AXP305 compatible (plus optional IRQ) Date: Fri, 23 Jul 2021 16:38:28 +0100 [thread overview] Message-ID: <20210723153838.6785-2-andre.przywara@arm.com> (raw) In-Reply-To: <20210723153838.6785-1-andre.przywara@arm.com> The AXP305 PMIC used on many boards with the H616 SoC seems to be fully compatible to the AXP805 PMIC, so add the proper chain of compatible strings. Also at least on one board (Orangepi Zero2) there is no interrupt line connected to the CPU, so make the "interrupts" property optional. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/mfd/axp20x.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 4991a6415796..2b53dcc0ea61 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -26,10 +26,10 @@ Required properties: * "x-powers,axp803" * "x-powers,axp806" * "x-powers,axp805", "x-powers,axp806" + * "x-powers,axp305", "x-powers,axp805", "x-powers,axp806" * "x-powers,axp809" * "x-powers,axp813" - reg: The I2C slave address or RSB hardware address for the AXP chip -- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin - interrupt-controller: The PMIC has its own internal IRQs - #interrupt-cells: Should be set to 1 @@ -43,6 +43,7 @@ more information: AXP20x/LDO3: software-based implementation Optional properties: +- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz AXP152/20X: range: 750-1875, Default: 1.5 MHz AXP22X/8XX: range: 1800-4050, Default: 3 MHz -- 2.17.6 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-23 15:39 UTC|newest] Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-23 15:38 [PATCH v8 00/11] arm64: sunxi: Initial Allwinner H616 SoC support Andre Przywara 2021-07-23 15:38 ` Andre Przywara 2021-07-23 15:38 ` Andre Przywara [this message] 2021-07-23 15:38 ` [PATCH v8 01/11] dt-bindings: mfd: axp20x: Add AXP305 compatible (plus optional IRQ) Andre Przywara 2021-08-16 12:39 ` Lee Jones 2021-08-16 12:39 ` Lee Jones 2021-07-23 15:38 ` [PATCH v8 02/11] dt-bindings: rtc: sun6i: Add H616 compatible string Andre Przywara 2021-07-23 15:38 ` Andre Przywara 2021-07-23 22:34 ` Rob Herring 2021-07-23 22:34 ` Rob Herring 2021-07-26 14:41 ` Maxime Ripard 2021-07-26 14:41 ` Maxime Ripard 2021-08-02 0:39 ` Andre Przywara 2021-08-02 0:39 ` Andre Przywara 2021-08-17 7:38 ` Maxime Ripard 2021-08-17 7:38 ` Maxime Ripard 2021-08-17 8:13 ` Alexandre Belloni 2021-08-17 8:13 ` Alexandre Belloni 2021-08-19 7:56 ` Maxime Ripard 2021-08-19 7:56 ` Maxime Ripard 2021-08-18 9:04 ` Andre Przywara 2021-08-18 9:04 ` Andre Przywara 2021-08-20 3:57 ` Samuel Holland 2021-08-20 3:57 ` Samuel Holland 2021-09-01 7:21 ` Maxime Ripard 2021-09-01 7:21 ` Maxime Ripard 2021-07-23 15:38 ` [PATCH v8 03/11] rtc: sun6i: Fix time overflow handling Andre Przywara 2021-07-23 15:38 ` Andre Przywara 2021-07-25 5:44 ` Jernej Škrabec 2021-07-25 5:44 ` Jernej Škrabec 2021-07-23 15:38 ` [PATCH v8 04/11] rtc: sun6i: Add support for linear day storage Andre Przywara 2021-07-23 15:38 ` Andre Przywara 2021-07-25 5:51 ` Jernej Škrabec 2021-07-25 5:51 ` Jernej Škrabec 2021-07-23 15:38 ` [PATCH v8 05/11] rtc: sun6i: Add support for broken-down alarm registers Andre Przywara 2021-07-23 15:38 ` Andre Przywara 2021-07-25 6:11 ` Jernej Škrabec 2021-07-25 6:11 ` Jernej Škrabec 2021-08-02 0:39 ` Andre Przywara 2021-08-02 0:39 ` Andre Przywara 2021-07-23 15:38 ` [PATCH v8 06/11] rtc: sun6i: Add support for RTCs without external LOSCs Andre Przywara 2021-07-23 15:38 ` Andre Przywara 2021-07-25 6:18 ` Jernej Škrabec 2021-07-25 6:18 ` Jernej Škrabec 2021-07-23 15:38 ` [PATCH v8 07/11] rtc: sun6i: Add Allwinner H616 support Andre Przywara 2021-07-23 15:38 ` Andre Przywara 2021-07-25 6:19 ` Jernej Škrabec 2021-07-25 6:19 ` Jernej Škrabec 2021-07-23 15:38 ` [PATCH v8 08/11] arm64: dts: allwinner: Add Allwinner H616 .dtsi file Andre Przywara 2021-07-23 15:38 ` Andre Przywara 2021-07-23 15:38 ` [PATCH v8 09/11] dt-bindings: arm: sunxi: Add two H616 board compatible strings Andre Przywara 2021-07-23 15:38 ` Andre Przywara 2021-07-23 15:38 ` [PATCH v8 10/11] arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support Andre Przywara 2021-07-23 15:38 ` Andre Przywara 2021-07-23 15:38 ` [PATCH v8 11/11] arm64: dts: allwinner: h616: Add X96 Mate TV box support Andre Przywara 2021-07-23 15:38 ` Andre Przywara 2021-07-25 16:41 ` [PATCH v8 00/11] arm64: sunxi: Initial Allwinner H616 SoC support Icenowy Zheng 2021-07-25 16:41 ` Icenowy Zheng 2021-07-25 16:41 ` Icenowy Zheng 2021-07-26 14:52 ` Maxime Ripard 2021-07-26 14:52 ` Maxime Ripard 2021-08-02 0:38 ` Andre Przywara 2021-08-02 0:38 ` Andre Przywara 2021-08-17 7:30 ` Maxime Ripard 2021-08-17 7:30 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210723153838.6785-2-andre.przywara@arm.com \ --to=andre.przywara@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=icenowy@aosc.io \ --cc=jernej.skrabec@gmail.com \ --cc=lee.jones@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@googlegroups.com \ --cc=linux-sunxi@lists.linux.dev \ --cc=megous@megous.com \ --cc=mripard@kernel.org \ --cc=robh@kernel.org \ --cc=samuel@sholland.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.