All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthew Hagan <mnhagan88@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Matthew Hagan <mnhagan88@gmail.com>,
	Rob Herring <robh+dt@kernel.org>, Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	bcm-kernel-feedback-list@broadcom.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 5/5] ARM: dts: NSP: Fix MX65 MDIO mux warnings
Date: Sat, 28 Aug 2021 11:27:03 +0000	[thread overview]
Message-ID: <20210828112704.2283805-5-mnhagan88@gmail.com> (raw)
In-Reply-To: <20210828112704.2283805-1-mnhagan88@gmail.com>

Firstly this fixes the following message:
mdio-mii-mux: $nodename:0: 'mdio-mii-mux' does not match '^mdio-mux[\\-@]?'

Secondly, move the mdio-mux to within the axi node and add the unit
address. This requires exposing the axi node via a label in bcm-nsp.dtsi.
This fixes the following warning:
Warning (unit_address_vs_reg): /mdio-mii-mux: node has a reg or ranges property, but no unit name

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi                | 2 +-
 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 6 ++++--
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 180827500f25..1c08daa18858 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -166,7 +166,7 @@ periph_clk: periph_clk {
 		};
 	};
 
-	axi@18000000 {
+	axi: axi@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x0011c40c>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
index 57d0c5eb9749..102acd85fab2 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -70,10 +70,12 @@ led-5 {
 			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
 		};
 	};
+};
 
-	mdio-mii-mux {
+&axi {
+	mdio-mux@3f1c0 {
 		compatible = "mdio-mux-mmioreg", "mdio-mux";
-		reg = <0x1803f1c0 0x4>;
+		reg = <0x3f1c0 0x4>;
 		mux-mask = <0x2000>;
 		mdio-parent-bus = <&mdio_ext>;
 		#address-cells = <1>;
-- 
2.27.0


WARNING: multiple messages have this Message-ID (diff)
From: Matthew Hagan <mnhagan88@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Matthew Hagan <mnhagan88@gmail.com>,
	Rob Herring <robh+dt@kernel.org>, Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	bcm-kernel-feedback-list@broadcom.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 5/5] ARM: dts: NSP: Fix MX65 MDIO mux warnings
Date: Sat, 28 Aug 2021 11:27:03 +0000	[thread overview]
Message-ID: <20210828112704.2283805-5-mnhagan88@gmail.com> (raw)
In-Reply-To: <20210828112704.2283805-1-mnhagan88@gmail.com>

Firstly this fixes the following message:
mdio-mii-mux: $nodename:0: 'mdio-mii-mux' does not match '^mdio-mux[\\-@]?'

Secondly, move the mdio-mux to within the axi node and add the unit
address. This requires exposing the axi node via a label in bcm-nsp.dtsi.
This fixes the following warning:
Warning (unit_address_vs_reg): /mdio-mii-mux: node has a reg or ranges property, but no unit name

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi                | 2 +-
 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 6 ++++--
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 180827500f25..1c08daa18858 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -166,7 +166,7 @@ periph_clk: periph_clk {
 		};
 	};
 
-	axi@18000000 {
+	axi: axi@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x0011c40c>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
index 57d0c5eb9749..102acd85fab2 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -70,10 +70,12 @@ led-5 {
 			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
 		};
 	};
+};
 
-	mdio-mii-mux {
+&axi {
+	mdio-mux@3f1c0 {
 		compatible = "mdio-mux-mmioreg", "mdio-mux";
-		reg = <0x1803f1c0 0x4>;
+		reg = <0x3f1c0 0x4>;
 		mux-mask = <0x2000>;
 		mdio-parent-bus = <&mdio_ext>;
 		#address-cells = <1>;
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-08-28 11:27 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-28 11:26 [PATCH 1/5] ARM: dts: NSP: Add bcm958623hr board name to dts Matthew Hagan
2021-08-28 11:26 ` Matthew Hagan
2021-08-28 11:27 ` [PATCH 2/5] ARM: dts: NSP: Fix mpcore, mmc node names Matthew Hagan
2021-08-28 11:27   ` Matthew Hagan
2021-08-28 11:27 ` [PATCH 3/5] ARM: dts: NSP: Fix MDIO mux " Matthew Hagan
2021-08-28 11:27   ` Matthew Hagan
2021-08-28 17:07   ` Andrew Lunn
2021-08-28 17:07     ` Andrew Lunn
2021-08-28 21:52     ` Matthew Hagan
2021-08-28 21:52       ` Matthew Hagan
2021-08-28 22:14       ` Andrew Lunn
2021-08-28 22:14         ` Andrew Lunn
2021-09-16 12:52   ` Andrew Lunn
2021-09-16 12:52     ` Andrew Lunn
2021-08-28 11:27 ` [PATCH 4/5] ARM: dts: NSP: Fix MX64/MX65 eeprom node name Matthew Hagan
2021-08-28 11:27   ` Matthew Hagan
2021-08-28 11:27 ` Matthew Hagan [this message]
2021-08-28 11:27   ` [PATCH 5/5] ARM: dts: NSP: Fix MX65 MDIO mux warnings Matthew Hagan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210828112704.2283805-5-mnhagan88@gmail.com \
    --to=mnhagan88@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sbranden@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.