* [Buildroot] [PATCH v2, 1/2] package/lvm2: make a standard install for host
@ 2021-09-25 7:49 Fabrice Fontaine
2021-09-25 7:49 ` [Buildroot] [PATCH v2, 2/2] package/libvirt: add host-lvm2 dependency Fabrice Fontaine
2021-09-26 19:44 ` [Buildroot] [PATCH v2, 1/2] package/lvm2: make a standard install for host Arnout Vandecappelle
0 siblings, 2 replies; 3+ messages in thread
From: Fabrice Fontaine @ 2021-09-25 7:49 UTC (permalink / raw)
To: buildroot; +Cc: Fabrice Fontaine, Jared Bents
Make a standard install (i.e. with pvcreate) for host as it is needed
for libvirt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
---
Changes v1 -> v2 (after review of Yann E. Morin):
- Use --with-confdir instead of DESTDIR
package/lvm2/lvm2.mk | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/package/lvm2/lvm2.mk b/package/lvm2/lvm2.mk
index 3a94aebfd4..5ca0dc565f 100644
--- a/package/lvm2/lvm2.mk
+++ b/package/lvm2/lvm2.mk
@@ -71,9 +71,9 @@ HOST_LVM2_CONF_OPTS = \
--disable-dmeventd \
--disable-fsadm \
--disable-readline \
- --disable-selinux
-HOST_LVM2_MAKE_OPTS = device-mapper
-HOST_LVM2_INSTALL_OPTS = install_device-mapper
+ --disable-selinux \
+ --with-confdir=$(HOST_DIR)/etc
+HOST_LVM2_INSTALL_OPTS = install
$(eval $(autotools-package))
$(eval $(host-autotools-package))
--
2.33.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH v2, 2/2] package/libvirt: add host-lvm2 dependency
2021-09-25 7:49 [Buildroot] [PATCH v2, 1/2] package/lvm2: make a standard install for host Fabrice Fontaine
@ 2021-09-25 7:49 ` Fabrice Fontaine
2021-09-26 19:44 ` [Buildroot] [PATCH v2, 1/2] package/lvm2: make a standard install for host Arnout Vandecappelle
1 sibling, 0 replies; 3+ messages in thread
From: Fabrice Fontaine @ 2021-09-25 7:49 UTC (permalink / raw)
To: buildroot; +Cc: Fabrice Fontaine, Jared Bents
host-lvm2 is needed to avoid the following build failure raised since
the addition of the package in commit
ccfc90e1010e42e6529afae3a5ea8bf7226dabc1:
Program pvcreate found: NO
../output-1/build/libvirt-7.7.0/meson.build:1888:6: ERROR: Program 'pvcreate' not found
Fixes:
- http://autobuild.buildroot.org/results/13c12086a0ce06c348d5971b56b5f4f27fa0f317
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
---
package/libvirt/libvirt.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/libvirt/libvirt.mk b/package/libvirt/libvirt.mk
index 0f6c7cef7f..3118de4d58 100644
--- a/package/libvirt/libvirt.mk
+++ b/package/libvirt/libvirt.mk
@@ -180,7 +180,7 @@ endif
ifeq ($(BR2_PACKAGE_LVM2_STANDARD_INSTALL),y)
LIBVIRT_CONF_OPTS += -Dstorage_lvm=enabled
-LIBVIRT_DEPENDENCIES += lvm2
+LIBVIRT_DEPENDENCIES += host-lvm2 lvm2
else
LIBVIRT_CONF_OPTS += -Dstorage_lvm=disabled
endif
--
2.33.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [Buildroot] [PATCH v2, 1/2] package/lvm2: make a standard install for host
2021-09-25 7:49 [Buildroot] [PATCH v2, 1/2] package/lvm2: make a standard install for host Fabrice Fontaine
2021-09-25 7:49 ` [Buildroot] [PATCH v2, 2/2] package/libvirt: add host-lvm2 dependency Fabrice Fontaine
@ 2021-09-26 19:44 ` Arnout Vandecappelle
1 sibling, 0 replies; 3+ messages in thread
From: Arnout Vandecappelle @ 2021-09-26 19:44 UTC (permalink / raw)
To: Fabrice Fontaine, buildroot; +Cc: Jared Bents
On 25/09/2021 09:49, Fabrice Fontaine wrote:
> Make a standard install (i.e. with pvcreate) for host as it is needed
> for libvirt
I don't fully understand this. Does it mean:
Use the standard install for the host, so e.g. pvcreate is installed as well.
pvcreate is needed for libvirt.
>
> Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
> ---
> Changes v1 -> v2 (after review of Yann E. Morin):
> - Use --with-confdir instead of DESTDIR
>
> package/lvm2/lvm2.mk | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/package/lvm2/lvm2.mk b/package/lvm2/lvm2.mk
> index 3a94aebfd4..5ca0dc565f 100644
> --- a/package/lvm2/lvm2.mk
> +++ b/package/lvm2/lvm2.mk
> @@ -71,9 +71,9 @@ HOST_LVM2_CONF_OPTS = \
> --disable-dmeventd \
> --disable-fsadm \
> --disable-readline \
> - --disable-selinux
> -HOST_LVM2_MAKE_OPTS = device-mapper
> -HOST_LVM2_INSTALL_OPTS = install_device-mapper
> + --disable-selinux \
> + --with-confdir=$(HOST_DIR)/etc
> +HOST_LVM2_INSTALL_OPTS = install
This is the default, right? So this line can simply be removed?
Regards,
Arnout
>
> $(eval $(autotools-package))
> $(eval $(host-autotools-package))
>
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-09-26 19:44 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-25 7:49 [Buildroot] [PATCH v2, 1/2] package/lvm2: make a standard install for host Fabrice Fontaine
2021-09-25 7:49 ` [Buildroot] [PATCH v2, 2/2] package/libvirt: add host-lvm2 dependency Fabrice Fontaine
2021-09-26 19:44 ` [Buildroot] [PATCH v2, 1/2] package/lvm2: make a standard install for host Arnout Vandecappelle
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.