All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
	broonie@kernel.org, kernel@pengutronix.de
Cc: shawnguo@kernel.org, s.hauer@pengutronix.de, linux-imx@nxp.com,
	amitk@kernel.org, rui.zhang@intel.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	alistair23@gmail.com, linux-hwmon@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v13 8/9] ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a
Date: Fri, 15 Oct 2021 22:25:50 +1000	[thread overview]
Message-ID: <20211015122551.38951-9-alistair@alistair23.me> (raw)
In-Reply-To: <20211015122551.38951-1-alistair@alistair23.me>

Enable the silergy,sy7636a and silergy,sy7636a-regulator on the
reMarkable2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/boot/dts/imx7d-remarkable2.dts | 62 +++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 89cbf13097a4..b66d28b30d75 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -22,6 +22,27 @@ memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
 
+	thermal-zones {
+		epd-thermal {
+			thermal-sensors = <&epd_pmic>;
+			polling-delay-passive = <30000>;
+			polling-delay = <30000>;
+			trips {
+				trip0 {
+					temperature = <49000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	reg_brcm: regulator-brcm {
 		compatible = "regulator-fixed";
 		regulator-name = "brcm_reg";
@@ -51,6 +72,33 @@ &clks {
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	epd_pmic: sy7636a@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_epdpmic>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#thermal-sensor-cells = <0>;
+
+		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -125,6 +173,20 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
 		>;
 	};
 
+	pinctrl_epdpmic: epdpmicgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-- 
2.31.1


WARNING: multiple messages have this Message-ID (diff)
From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
	broonie@kernel.org, kernel@pengutronix.de
Cc: shawnguo@kernel.org, s.hauer@pengutronix.de, linux-imx@nxp.com,
	amitk@kernel.org, rui.zhang@intel.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	alistair23@gmail.com, linux-hwmon@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v13 8/9] ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a
Date: Fri, 15 Oct 2021 22:25:50 +1000	[thread overview]
Message-ID: <20211015122551.38951-9-alistair@alistair23.me> (raw)
In-Reply-To: <20211015122551.38951-1-alistair@alistair23.me>

Enable the silergy,sy7636a and silergy,sy7636a-regulator on the
reMarkable2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/boot/dts/imx7d-remarkable2.dts | 62 +++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 89cbf13097a4..b66d28b30d75 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -22,6 +22,27 @@ memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
 
+	thermal-zones {
+		epd-thermal {
+			thermal-sensors = <&epd_pmic>;
+			polling-delay-passive = <30000>;
+			polling-delay = <30000>;
+			trips {
+				trip0 {
+					temperature = <49000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	reg_brcm: regulator-brcm {
 		compatible = "regulator-fixed";
 		regulator-name = "brcm_reg";
@@ -51,6 +72,33 @@ &clks {
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	epd_pmic: sy7636a@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_epdpmic>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#thermal-sensor-cells = <0>;
+
+		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -125,6 +173,20 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
 		>;
 	};
 
+	pinctrl_epdpmic: epdpmicgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-10-15 12:27 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-15 12:25 [PATCH v13 0/9] Add support for the silergy,sy7636a Alistair Francis
2021-10-15 12:25 ` Alistair Francis
2021-10-15 12:25 ` [PATCH v13 1/9] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Alistair Francis
2021-10-15 12:25   ` [PATCH v13 1/9] dt-bindings: mfd: Initial commit of silergy, sy7636a.yaml Alistair Francis
2021-10-22 10:30   ` [PATCH v13 1/9] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Lee Jones
2021-10-22 10:30     ` Lee Jones
2021-10-15 12:25 ` [PATCH v13 2/9] mfd: simple-mfd-i2c: Add a Kconfig name Alistair Francis
2021-10-15 12:25   ` Alistair Francis
2021-10-22 10:30   ` Lee Jones
2021-10-22 10:30     ` Lee Jones
2021-10-15 12:25 ` [PATCH v13 3/9] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a Alistair Francis
2021-10-15 12:25   ` [PATCH v13 3/9] mfd: simple-mfd-i2c: Enable support for the silergy, sy7636a Alistair Francis
2021-10-21 11:27   ` [PATCH v13 3/9] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a Lee Jones
2021-10-21 11:27     ` Lee Jones
2021-10-15 12:25 ` [PATCH v13 4/9] regulator: sy7636a: Remove requirement on sy7636a mfd Alistair Francis
2021-10-15 12:25   ` Alistair Francis
2021-10-15 12:25 ` [PATCH v13 5/9] thermal: sy7636a: Add thermal driver for sy7636a Alistair Francis
2021-10-15 12:25   ` Alistair Francis
2021-10-16 10:32   ` Daniel Lezcano
2021-10-16 10:32     ` Daniel Lezcano
2021-10-15 12:25 ` [PATCH v13 6/9] hwmon: sy7636a: Add temperature " Alistair Francis
2021-10-15 12:25   ` Alistair Francis
2021-10-15 14:12   ` Guenter Roeck
2021-10-15 14:12     ` Guenter Roeck
2021-10-15 12:25 ` [PATCH v13 7/9] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a Alistair Francis
2021-10-15 12:25   ` Alistair Francis
2021-10-15 12:25 ` Alistair Francis [this message]
2021-10-15 12:25   ` [PATCH v13 8/9] ARM: dts: imx7d: remarkable2: " Alistair Francis
2021-10-15 12:25 ` [PATCH v13 9/9] ARM: dts: imx7d: remarkable2: Enable lcdif Alistair Francis
2021-10-15 12:25   ` Alistair Francis
2021-10-22  0:52 ` (subset) [PATCH v13 0/9] Add support for the silergy,sy7636a Mark Brown
2021-10-22  0:52   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211015122551.38951-9-alistair@alistair23.me \
    --to=alistair@alistair23.me \
    --cc=alistair23@gmail.com \
    --cc=amitk@kernel.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.