From: Adam Ford <aford173@gmail.com> To: linux-arm-kernel@lists.infradead.org Cc: tharvey@gateworks.com, frieder.schrempf@kontron.de, linux-media@vger.kernel.org, laurent.pinchart@ideasonboard.com, aford@beaconembedded.com, cstevens@beaconembedded.com, jagan@amarulasolutions.com, Adam Ford <aford173@gmail.com>, Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, Peng Fan <peng.fan@nxp.com>, Lucas Stach <l.stach@pengutronix.de>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH V2 2/5] arm64: dts: imx8mm: Add CSI nodes Date: Sat, 6 Nov 2021 10:54:24 -0500 [thread overview] Message-ID: <20211106155427.753197-2-aford173@gmail.com> (raw) In-Reply-To: <20211106155427.753197-1-aford173@gmail.com> There is a csi bridge and csis interface that tie together to allow csi2 capture. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-By: Tim Harvey <tharvey@gateworks.com> Tested-By: Tim Harvey <tharvey@gateworks.com> --- V2: No change arch/arm64/boot/dts/freescale/imx8mm.dtsi | 51 +++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index c2f3f118f82e..1f69c14d953f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -1068,6 +1068,22 @@ aips4: bus@32c00000 { #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; + csi: csi@32e20000 { + compatible = "fsl,imx8mm-csi", "fsl,imx7-csi"; + reg = <0x32e20000 0x1000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_CSI1_ROOT>; + clock-names = "mclk"; + power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>; + status = "disabled"; + + port { + csi_in: endpoint { + remote-endpoint = <&imx8mm_mipi_csi_out>; + }; + }; + }; + disp_blk_ctrl: blk-ctrl@32e28000 { compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon"; reg = <0x32e28000 0x100>; @@ -1095,6 +1111,41 @@ disp_blk_ctrl: blk-ctrl@32e28000 { #power-domain-cells = <1>; }; + mipi_csi: mipi-csi@32e30000 { + compatible = "fsl,imx8mm-mipi-csi2"; + reg = <0x32e30000 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>, + <&clk IMX8MM_SYS_PLL2_1000M>; + clock-frequency = <333000000>; + clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_CSI1_ROOT>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>; + clock-names = "pclk", "wrap", "phy", "axi"; + power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + imx8mm_mipi_csi_out: endpoint { + remote-endpoint = <&csi_in>; + }; + }; + }; + }; + usbotg1: usb@32e40000 { compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; reg = <0x32e40000 0x200>; -- 2.32.0
WARNING: multiple messages have this Message-ID (diff)
From: Adam Ford <aford173@gmail.com> To: linux-arm-kernel@lists.infradead.org Cc: tharvey@gateworks.com, frieder.schrempf@kontron.de, linux-media@vger.kernel.org, laurent.pinchart@ideasonboard.com, aford@beaconembedded.com, cstevens@beaconembedded.com, jagan@amarulasolutions.com, Adam Ford <aford173@gmail.com>, Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, Peng Fan <peng.fan@nxp.com>, Lucas Stach <l.stach@pengutronix.de>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH V2 2/5] arm64: dts: imx8mm: Add CSI nodes Date: Sat, 6 Nov 2021 10:54:24 -0500 [thread overview] Message-ID: <20211106155427.753197-2-aford173@gmail.com> (raw) In-Reply-To: <20211106155427.753197-1-aford173@gmail.com> There is a csi bridge and csis interface that tie together to allow csi2 capture. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-By: Tim Harvey <tharvey@gateworks.com> Tested-By: Tim Harvey <tharvey@gateworks.com> --- V2: No change arch/arm64/boot/dts/freescale/imx8mm.dtsi | 51 +++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index c2f3f118f82e..1f69c14d953f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -1068,6 +1068,22 @@ aips4: bus@32c00000 { #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; + csi: csi@32e20000 { + compatible = "fsl,imx8mm-csi", "fsl,imx7-csi"; + reg = <0x32e20000 0x1000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_CSI1_ROOT>; + clock-names = "mclk"; + power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>; + status = "disabled"; + + port { + csi_in: endpoint { + remote-endpoint = <&imx8mm_mipi_csi_out>; + }; + }; + }; + disp_blk_ctrl: blk-ctrl@32e28000 { compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon"; reg = <0x32e28000 0x100>; @@ -1095,6 +1111,41 @@ disp_blk_ctrl: blk-ctrl@32e28000 { #power-domain-cells = <1>; }; + mipi_csi: mipi-csi@32e30000 { + compatible = "fsl,imx8mm-mipi-csi2"; + reg = <0x32e30000 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>, + <&clk IMX8MM_SYS_PLL2_1000M>; + clock-frequency = <333000000>; + clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_CSI1_ROOT>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>; + clock-names = "pclk", "wrap", "phy", "axi"; + power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + imx8mm_mipi_csi_out: endpoint { + remote-endpoint = <&csi_in>; + }; + }; + }; + }; + usbotg1: usb@32e40000 { compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; reg = <0x32e40000 0x200>; -- 2.32.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-06 15:54 UTC|newest] Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-06 15:54 [PATCH V2 1/5] soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset Adam Ford 2021-11-06 15:54 ` Adam Ford 2021-11-06 15:54 ` Adam Ford [this message] 2021-11-06 15:54 ` [PATCH V2 2/5] arm64: dts: imx8mm: Add CSI nodes Adam Ford 2021-11-07 12:58 ` Fabio Estevam 2021-11-07 12:58 ` Fabio Estevam 2021-11-06 15:54 ` [PATCH V2 3/5] arm64: defconfig: Enable VIDEO_IMX_MEDIA Adam Ford 2021-11-06 15:54 ` Adam Ford 2021-11-07 13:01 ` Fabio Estevam 2021-11-07 13:01 ` Fabio Estevam 2021-11-06 15:54 ` [PATCH V2 4/5] arm64: dts: imx8mm-beacon: Enable OV5640 Camera Adam Ford 2021-11-06 15:54 ` Adam Ford 2021-11-07 13:01 ` Fabio Estevam 2021-11-07 13:01 ` Fabio Estevam 2021-11-21 23:18 ` Laurent Pinchart 2021-11-21 23:18 ` Laurent Pinchart 2021-11-22 3:07 ` Adam Ford 2021-11-22 3:07 ` Adam Ford 2021-11-23 0:15 ` Laurent Pinchart 2021-11-23 0:15 ` Laurent Pinchart 2021-11-23 7:38 ` (EXT) " Alexander Stein 2021-11-23 7:38 ` Alexander Stein 2021-11-23 9:47 ` Laurent Pinchart 2021-11-23 9:47 ` Laurent Pinchart 2021-11-29 18:56 ` Tim Harvey 2021-11-29 18:56 ` Tim Harvey 2021-11-06 15:54 ` [PATCH V2 5/5] arm64: defconfig: Enable OV5640 Adam Ford 2021-11-06 15:54 ` Adam Ford 2021-11-07 13:03 ` Fabio Estevam 2021-11-07 13:03 ` Fabio Estevam 2021-11-07 12:58 ` [PATCH V2 1/5] soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset Fabio Estevam 2021-11-07 12:58 ` Fabio Estevam 2021-11-08 8:56 ` Lucas Stach 2021-11-08 8:56 ` Lucas Stach 2021-11-12 6:54 ` Jagan Teki 2021-11-12 6:54 ` Jagan Teki 2021-11-19 23:51 ` Tim Harvey 2021-11-19 23:51 ` Tim Harvey 2021-11-20 18:33 ` Adam Ford 2021-11-20 18:33 ` Adam Ford 2021-11-21 23:13 ` Laurent Pinchart 2021-11-21 23:13 ` Laurent Pinchart 2021-11-21 22:25 ` Laurent Pinchart 2021-11-21 22:25 ` Laurent Pinchart 2021-11-21 22:30 ` Laurent Pinchart 2021-11-21 22:30 ` Laurent Pinchart 2021-11-23 13:59 ` Adam Ford 2021-11-23 13:59 ` Adam Ford 2021-11-25 5:42 ` Jagan Teki 2021-11-25 5:42 ` Jagan Teki 2021-11-25 15:18 ` Adam Ford 2021-11-25 15:18 ` Adam Ford 2021-11-26 0:33 ` Laurent Pinchart 2021-11-26 0:33 ` Laurent Pinchart 2021-11-27 13:50 ` Adam Ford 2021-11-27 13:50 ` Adam Ford 2021-11-27 15:02 ` Laurent Pinchart 2021-11-27 15:02 ` Laurent Pinchart
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211106155427.753197-2-aford173@gmail.com \ --to=aford173@gmail.com \ --cc=aford@beaconembedded.com \ --cc=catalin.marinas@arm.com \ --cc=cstevens@beaconembedded.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=frieder.schrempf@kontron.de \ --cc=jagan@amarulasolutions.com \ --cc=kernel@pengutronix.de \ --cc=l.stach@pengutronix.de \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=peng.fan@nxp.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=tharvey@gateworks.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.