All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>
Cc: Dom Cobley <dom@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	dri-devel@lists.freedesktop.org,
	Werner Sembach <wse@tuxedocomputers.com>,
	Phil Elwell <phil@raspberrypi.com>
Subject: [PATCH 06/11] drm/vc4: hdmi: Define colorspace matrices
Date: Fri,  3 Dec 2021 11:54:15 +0100	[thread overview]
Message-ID: <20211203105420.573494-7-maxime@cerno.tech> (raw)
In-Reply-To: <20211203105420.573494-1-maxime@cerno.tech>

The current CSC setup code for the BCM2711 uses a sequence of register
writes to configure the CSC depending on whether we output using a full
or limited range.

However, with the upcoming introduction of the YUV output, we're going
to add new matrices to perform the conversions, so we should switch to
something a bit more flexible that takes the matrix as an argument and
programs the CSC accordingly.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 79 +++++++++++++++++++++-------------
 1 file changed, 50 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 682c3c907cbe..7fdb49e790f3 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -775,6 +775,52 @@ static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
 	spin_unlock_irqrestore(&vc4_hdmi->hw_lock, flags);
 }
 
+
+/*
+ * If we need to output Full Range RGB, then use the unity matrix
+ *
+ * [ 1      0      0      0]
+ * [ 0      1      0      0]
+ * [ 0      0      1      0]
+ *
+ * Matrix is signed 2p13 fixed point, with signed 9p6 offsets
+ */
+static const u16 vc5_hdmi_csc_full_rgb_unity[3][4] = {
+	{ 0x2000, 0x0000, 0x0000, 0x0000 },
+	{ 0x0000, 0x2000, 0x0000, 0x0000 },
+	{ 0x0000, 0x0000, 0x2000, 0x0000 },
+};
+
+/*
+ * CEA VICs other than #1 require limited range RGB output unless
+ * overridden by an AVI infoframe. Apply a colorspace conversion to
+ * squash 0-255 down to 16-235. The matrix here is:
+ *
+ * [ 0.8594 0      0      16]
+ * [ 0      0.8594 0      16]
+ * [ 0      0      0.8594 16]
+ *
+ * Matrix is signed 2p13 fixed point, with signed 9p6 offsets
+ */
+static const u16 vc5_hdmi_csc_full_rgb_to_limited_rgb[3][4] = {
+	{ 0x1b80, 0x0000, 0x0000, 0x0400 },
+	{ 0x0000, 0x1b80, 0x0000, 0x0400 },
+	{ 0x0000, 0x0000, 0x1b80, 0x0400 },
+};
+
+static void vc5_hdmi_set_csc_coeffs(struct vc4_hdmi *vc4_hdmi,
+				    const u16 coeffs[3][4])
+{
+	lockdep_assert_held(&vc4_hdmi->hw_lock);
+
+	HDMI_WRITE(HDMI_CSC_12_11, (coeffs[0][1] << 16) | coeffs[0][0]);
+	HDMI_WRITE(HDMI_CSC_14_13, (coeffs[0][3] << 16) | coeffs[0][2]);
+	HDMI_WRITE(HDMI_CSC_22_21, (coeffs[1][1] << 16) | coeffs[1][0]);
+	HDMI_WRITE(HDMI_CSC_24_23, (coeffs[1][3] << 16) | coeffs[1][2]);
+	HDMI_WRITE(HDMI_CSC_32_31, (coeffs[2][1] << 16) | coeffs[2][0]);
+	HDMI_WRITE(HDMI_CSC_34_33, (coeffs[2][3] << 16) | coeffs[2][2]);
+}
+
 static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
 			       const struct drm_display_mode *mode)
 {
@@ -786,35 +832,10 @@ static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
 
 	HDMI_WRITE(HDMI_VEC_INTERFACE_XBAR, 0x354021);
 
-	if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode)) {
-		/* CEA VICs other than #1 requre limited range RGB
-		 * output unless overridden by an AVI infoframe.
-		 * Apply a colorspace conversion to squash 0-255 down
-		 * to 16-235.  The matrix here is:
-		 *
-		 * [ 0.8594 0      0      16]
-		 * [ 0      0.8594 0      16]
-		 * [ 0      0      0.8594 16]
-		 * [ 0      0      0       1]
-		 * Matrix is signed 2p13 fixed point, with signed 9p6 offsets
-		 */
-		HDMI_WRITE(HDMI_CSC_12_11, (0x0000 << 16) | 0x1b80);
-		HDMI_WRITE(HDMI_CSC_14_13, (0x0400 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_22_21, (0x1b80 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_24_23, (0x0400 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_32_31, (0x0000 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_34_33, (0x0400 << 16) | 0x1b80);
-	} else {
-		/* Still use the matrix for full range, but make it unity.
-		 * Matrix is signed 2p13 fixed point, with signed 9p6 offsets
-		 */
-		HDMI_WRITE(HDMI_CSC_12_11, (0x0000 << 16) | 0x2000);
-		HDMI_WRITE(HDMI_CSC_14_13, (0x0000 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_22_21, (0x2000 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_24_23, (0x0000 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_32_31, (0x0000 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_34_33, (0x0000 << 16) | 0x2000);
-	}
+	if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode))
+		vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_to_limited_rgb);
+	else
+		vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_unity);
 
 	HDMI_WRITE(HDMI_CSC_CTL, csc_ctl);
 
-- 
2.33.1


  parent reply	other threads:[~2021-12-03 10:54 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-03 10:54 [PATCH 00/11] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
2021-12-03 10:54 ` [PATCH 01/11] drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry Maxime Ripard
2021-12-03 10:54 ` [PATCH 02/11] drm/vc4: hdmi: Add full range RGB helper Maxime Ripard
2021-12-03 10:54 ` [PATCH 03/11] drm/vc4: hdmi: Use full range helper in csc functions Maxime Ripard
2021-12-03 10:54 ` [PATCH 04/11] drm/vc4: hdmi: Move XBAR setup to csc_setup Maxime Ripard
2021-12-03 10:54 ` [PATCH 05/11] drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines Maxime Ripard
2021-12-03 10:54 ` Maxime Ripard [this message]
2021-12-03 10:54 ` [PATCH 07/11] drm/vc4: hdmi: Change CSC callback prototype Maxime Ripard
2021-12-03 10:54 ` [PATCH 08/11] drm/vc4: hdmi: Move clock validation to its own function Maxime Ripard
2021-12-03 10:54 ` [PATCH 09/11] drm/vc4: hdmi: Move clock calculation into " Maxime Ripard
2021-12-03 10:54 ` [PATCH 10/11] drm/vc4: hdmi: Support HDMI YUV output Maxime Ripard
2021-12-03 12:56   ` kernel test robot
2021-12-03 12:56     ` kernel test robot
2021-12-04  0:30   ` kernel test robot
2021-12-04  0:30     ` kernel test robot
2021-12-03 10:54 ` [PATCH 11/11] drm/vc4: hdmi: Force YUV422 if the rate is too high Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211203105420.573494-7-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=daniel.vetter@intel.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dom@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    --cc=tzimmermann@suse.de \
    --cc=wse@tuxedocomputers.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.