From: Lukasz Majewski <lukma@denx.de>
To: Arnd Bergmann <arnd@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
Russell King <linux@armlinux.org.uk>,
Hartley Sweeten <hsweeten@visionengravers.com>,
Alexander Sverdlin <alexander.sverdlin@gmail.com>,
Hubert Feurstein <hubert.feurstein@contec.at>,
Krzysztof Kozlowski <krzk@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Linus Walleij <linus.walleij@linaro.org>,
Imre Kaloz <kaloz@openwrt.org>,
Krzysztof Halasa <khalasa@piap.pl>, Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@bootlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Simtec Linux Team <linux@simtec.co.uk>,
Liviu Dudau <liviu.dudau@arm.com>,
Sudeep Holla <sudeep.holla@arm.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Ard Biesheuvel <ardb@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, patches@opensource.cirrus.com
Subject: Re: [PATCH 03/12] ARM: ep93xx: enable SPARSE_IRQ
Date: Tue, 5 Apr 2022 11:42:58 +0200 [thread overview]
Message-ID: <20220405114258.1ee218d6@ktm> (raw)
In-Reply-To: <20220405091750.3076973-4-arnd@kernel.org>
[-- Attachment #1.1: Type: text/plain, Size: 11975 bytes --]
On Tue, 5 Apr 2022 11:17:41 +0200
Arnd Bergmann <arnd@kernel.org> wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> Without CONFIG_SPARSE_IRQ, we rely on mach/irqs.h to define NR_IRQS
> globally. Do the minimal conversion by setting .nr_irqs in each
> machine descriptor.
>
> Only the vision_ep9307 machine has extra IRQs for GPIOs, so make
> .nr_irqs the original value there, while using the plain
> NR_EP93XX_IRQS everywhere else.
>
> Cc: Hartley Sweeten <hsweeten@visionengravers.com>
> Cc: Hubert Feurstein <hubert.feurstein@contec.at>
> Cc: Lukasz Majewski <lukma@denx.de>
> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/Kconfig | 2 ++
> arch/arm/mach-ep93xx/adssphere.c | 1 +
> arch/arm/mach-ep93xx/core.c | 1 +
> arch/arm/mach-ep93xx/edb93xx.c | 8 ++++++++
> arch/arm/mach-ep93xx/gesbc9312.c | 1 +
> arch/arm/mach-ep93xx/{include/mach => }/irqs.h | 7 -------
> arch/arm/mach-ep93xx/micro9.c | 4 ++++
> arch/arm/mach-ep93xx/simone.c | 1 +
> arch/arm/mach-ep93xx/snappercl15.c | 1 +
> arch/arm/mach-ep93xx/soc.h | 1 +
> arch/arm/mach-ep93xx/ts72xx.c | 3 ++-
> arch/arm/mach-ep93xx/vision_ep9307.c | 1 +
> 12 files changed, 23 insertions(+), 8 deletions(-)
> rename arch/arm/mach-ep93xx/{include/mach => }/irqs.h (96%)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 31f024e6e925..5177e54cc14c 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -358,6 +358,8 @@ config ARCH_EP93XX
> select CPU_ARM920T
> select GPIOLIB
> select COMMON_CLK
> + select IRQ_DOMAIN
> + select SPARSE_IRQ
> help
> This enables support for the Cirrus EP93xx series of CPUs.
>
> diff --git a/arch/arm/mach-ep93xx/adssphere.c
> b/arch/arm/mach-ep93xx/adssphere.c index 8d5e349a7a6d..0c48d3c5b8e7
> 100644 --- a/arch/arm/mach-ep93xx/adssphere.c
> +++ b/arch/arm/mach-ep93xx/adssphere.c
> @@ -32,6 +32,7 @@ static void __init adssphere_init_machine(void)
> MACHINE_START(ADSSPHERE, "ADS Sphere board")
> /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
> index e4569a5acc3f..2d58e273c96d 100644
> --- a/arch/arm/mach-ep93xx/core.c
> +++ b/arch/arm/mach-ep93xx/core.c
> @@ -47,6 +47,7 @@
> #include <asm/mach/map.h>
>
> #include "soc.h"
> +#include "irqs.h"
>
> /*************************************************************************
> * Static I/O mappings that are needed for all EP93xx platforms
> diff --git a/arch/arm/mach-ep93xx/edb93xx.c
> b/arch/arm/mach-ep93xx/edb93xx.c index af0e22471ebd..4b90899a66e9
> 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c
> +++ b/arch/arm/mach-ep93xx/edb93xx.c
> @@ -243,6 +243,7 @@ static void __init edb93xx_init_machine(void)
> MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
> /* Maintainer: H Hartley Sweeten
> <hsweeten@visionengravers.com> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -255,6 +256,7 @@ MACHINE_END
> MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
> /* Maintainer: George Kashperko <george@chas.com.ua> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -267,6 +269,7 @@ MACHINE_END
> MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
> /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -279,6 +282,7 @@ MACHINE_END
> MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
> /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -291,6 +295,7 @@ MACHINE_END
> MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
> /* Maintainer: H Hartley Sweeten
> <hsweeten@visionengravers.com> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -303,6 +308,7 @@ MACHINE_END
> MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
> /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com>
> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -315,6 +321,7 @@ MACHINE_END
> MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
> /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -327,6 +334,7 @@ MACHINE_END
> MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
> /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/gesbc9312.c
> b/arch/arm/mach-ep93xx/gesbc9312.c index d7f9890321eb..0b7043e3e178
> 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c
> +++ b/arch/arm/mach-ep93xx/gesbc9312.c
> @@ -32,6 +32,7 @@ static void __init gesbc9312_init_machine(void)
> MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
> /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h
> b/arch/arm/mach-ep93xx/irqs.h similarity index 96%
> rename from arch/arm/mach-ep93xx/include/mach/irqs.h
> rename to arch/arm/mach-ep93xx/irqs.h
> index 60c69c4ed7e1..353201b90c66 100644
> --- a/arch/arm/mach-ep93xx/include/mach/irqs.h
> +++ b/arch/arm/mach-ep93xx/irqs.h
> @@ -1,8 +1,4 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -/*
> - * arch/arm/mach-ep93xx/include/mach/irqs.h
> - */
> -
> #ifndef __ASM_ARCH_IRQS_H
> #define __ASM_ARCH_IRQS_H
>
> @@ -77,7 +73,4 @@
> #define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
> #define EP93XX_BOARD_IRQS 32
>
> -#define NR_IRQS (NR_EP93XX_IRQS +
> EP93XX_BOARD_IRQS) -
> -
> #endif
> diff --git a/arch/arm/mach-ep93xx/micro9.c
> b/arch/arm/mach-ep93xx/micro9.c index e6ead8ded6ee..c121c459aa17
> 100644 --- a/arch/arm/mach-ep93xx/micro9.c
> +++ b/arch/arm/mach-ep93xx/micro9.c
> @@ -76,6 +76,7 @@ static void __init micro9_init_machine(void)
> MACHINE_START(MICRO9, "Contec Micro9-High")
> /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at>
> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -88,6 +89,7 @@ MACHINE_END
> MACHINE_START(MICRO9M, "Contec Micro9-Mid")
> /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at>
> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -100,6 +102,7 @@ MACHINE_END
> MACHINE_START(MICRO9L, "Contec Micro9-Lite")
> /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at>
> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -112,6 +115,7 @@ MACHINE_END
> MACHINE_START(MICRO9S, "Contec Micro9-Slim")
> /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at>
> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/simone.c
> b/arch/arm/mach-ep93xx/simone.c index 5291053023b2..569e72413561
> 100644 --- a/arch/arm/mach-ep93xx/simone.c
> +++ b/arch/arm/mach-ep93xx/simone.c
> @@ -119,6 +119,7 @@ static void __init simone_init_machine(void)
> MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
> /* Maintainer: Ryan Mallon */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/snappercl15.c
> b/arch/arm/mach-ep93xx/snappercl15.c index e200d69471e9..1dfb725671b1
> 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c
> +++ b/arch/arm/mach-ep93xx/snappercl15.c
> @@ -153,6 +153,7 @@ static void __init snappercl15_init_machine(void)
> MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
> /* Maintainer: Ryan Mallon */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
> index 94ef7f275f94..f0986e288d19 100644
> --- a/arch/arm/mach-ep93xx/soc.h
> +++ b/arch/arm/mach-ep93xx/soc.h
> @@ -10,6 +10,7 @@
> #define _EP93XX_SOC_H
>
> #include <mach/ep93xx-regs.h>
> +#include "irqs.h"
>
> /*
> * EP93xx Physical Memory Map:
> diff --git a/arch/arm/mach-ep93xx/ts72xx.c
> b/arch/arm/mach-ep93xx/ts72xx.c index 12eff8c8074d..e70bac011407
> 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c
> +++ b/arch/arm/mach-ep93xx/ts72xx.c
> @@ -22,7 +22,6 @@
>
> #include "gpio-ep93xx.h"
> #include "hardware.h"
> -#include <mach/irqs.h>
>
> #include <asm/mach-types.h>
> #include <asm/mach/map.h>
> @@ -350,6 +349,7 @@ static void __init ts72xx_init_machine(void)
> MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
> /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ts72xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -413,6 +413,7 @@ static void __init bk3_init_machine(void)
> MACHINE_START(BK3, "Liebherr controller BK3.1")
> /* Maintainer: Lukasz Majewski <lukma@denx.de> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ts72xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c
> b/arch/arm/mach-ep93xx/vision_ep9307.c index
> e46281e60bf7..30d9cf3791eb 100644 ---
> a/arch/arm/mach-ep93xx/vision_ep9307.c +++
> b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -302,6 +302,7 @@ static
> void __init vision_init_machine(void) MACHINE_START(VISION_EP9307,
> "Vision Engraving Systems EP9307") /* Maintainer: H Hartley Sweeten
> <hsweeten@visionengravers.com> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
> .map_io = vision_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Lukasz Majewski <lukma@denx.de>
To: Arnd Bergmann <arnd@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
Russell King <linux@armlinux.org.uk>,
Hartley Sweeten <hsweeten@visionengravers.com>,
Alexander Sverdlin <alexander.sverdlin@gmail.com>,
Hubert Feurstein <hubert.feurstein@contec.at>,
Krzysztof Kozlowski <krzk@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Linus Walleij <linus.walleij@linaro.org>,
Imre Kaloz <kaloz@openwrt.org>,
Krzysztof Halasa <khalasa@piap.pl>, Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@bootlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Simtec Linux Team <linux@simtec.co.uk>,
Liviu Dudau <liviu.dudau@arm.com>,
Sudeep Holla <sudeep.holla@arm.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Ard Biesheuvel <ardb@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, patches@opensource.cirrus.com
Subject: Re: [PATCH 03/12] ARM: ep93xx: enable SPARSE_IRQ
Date: Tue, 5 Apr 2022 11:42:58 +0200 [thread overview]
Message-ID: <20220405114258.1ee218d6@ktm> (raw)
In-Reply-To: <20220405091750.3076973-4-arnd@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 11975 bytes --]
On Tue, 5 Apr 2022 11:17:41 +0200
Arnd Bergmann <arnd@kernel.org> wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> Without CONFIG_SPARSE_IRQ, we rely on mach/irqs.h to define NR_IRQS
> globally. Do the minimal conversion by setting .nr_irqs in each
> machine descriptor.
>
> Only the vision_ep9307 machine has extra IRQs for GPIOs, so make
> .nr_irqs the original value there, while using the plain
> NR_EP93XX_IRQS everywhere else.
>
> Cc: Hartley Sweeten <hsweeten@visionengravers.com>
> Cc: Hubert Feurstein <hubert.feurstein@contec.at>
> Cc: Lukasz Majewski <lukma@denx.de>
> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/Kconfig | 2 ++
> arch/arm/mach-ep93xx/adssphere.c | 1 +
> arch/arm/mach-ep93xx/core.c | 1 +
> arch/arm/mach-ep93xx/edb93xx.c | 8 ++++++++
> arch/arm/mach-ep93xx/gesbc9312.c | 1 +
> arch/arm/mach-ep93xx/{include/mach => }/irqs.h | 7 -------
> arch/arm/mach-ep93xx/micro9.c | 4 ++++
> arch/arm/mach-ep93xx/simone.c | 1 +
> arch/arm/mach-ep93xx/snappercl15.c | 1 +
> arch/arm/mach-ep93xx/soc.h | 1 +
> arch/arm/mach-ep93xx/ts72xx.c | 3 ++-
> arch/arm/mach-ep93xx/vision_ep9307.c | 1 +
> 12 files changed, 23 insertions(+), 8 deletions(-)
> rename arch/arm/mach-ep93xx/{include/mach => }/irqs.h (96%)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 31f024e6e925..5177e54cc14c 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -358,6 +358,8 @@ config ARCH_EP93XX
> select CPU_ARM920T
> select GPIOLIB
> select COMMON_CLK
> + select IRQ_DOMAIN
> + select SPARSE_IRQ
> help
> This enables support for the Cirrus EP93xx series of CPUs.
>
> diff --git a/arch/arm/mach-ep93xx/adssphere.c
> b/arch/arm/mach-ep93xx/adssphere.c index 8d5e349a7a6d..0c48d3c5b8e7
> 100644 --- a/arch/arm/mach-ep93xx/adssphere.c
> +++ b/arch/arm/mach-ep93xx/adssphere.c
> @@ -32,6 +32,7 @@ static void __init adssphere_init_machine(void)
> MACHINE_START(ADSSPHERE, "ADS Sphere board")
> /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
> index e4569a5acc3f..2d58e273c96d 100644
> --- a/arch/arm/mach-ep93xx/core.c
> +++ b/arch/arm/mach-ep93xx/core.c
> @@ -47,6 +47,7 @@
> #include <asm/mach/map.h>
>
> #include "soc.h"
> +#include "irqs.h"
>
> /*************************************************************************
> * Static I/O mappings that are needed for all EP93xx platforms
> diff --git a/arch/arm/mach-ep93xx/edb93xx.c
> b/arch/arm/mach-ep93xx/edb93xx.c index af0e22471ebd..4b90899a66e9
> 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c
> +++ b/arch/arm/mach-ep93xx/edb93xx.c
> @@ -243,6 +243,7 @@ static void __init edb93xx_init_machine(void)
> MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
> /* Maintainer: H Hartley Sweeten
> <hsweeten@visionengravers.com> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -255,6 +256,7 @@ MACHINE_END
> MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
> /* Maintainer: George Kashperko <george@chas.com.ua> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -267,6 +269,7 @@ MACHINE_END
> MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
> /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -279,6 +282,7 @@ MACHINE_END
> MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
> /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -291,6 +295,7 @@ MACHINE_END
> MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
> /* Maintainer: H Hartley Sweeten
> <hsweeten@visionengravers.com> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -303,6 +308,7 @@ MACHINE_END
> MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
> /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com>
> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -315,6 +321,7 @@ MACHINE_END
> MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
> /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -327,6 +334,7 @@ MACHINE_END
> MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
> /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/gesbc9312.c
> b/arch/arm/mach-ep93xx/gesbc9312.c index d7f9890321eb..0b7043e3e178
> 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c
> +++ b/arch/arm/mach-ep93xx/gesbc9312.c
> @@ -32,6 +32,7 @@ static void __init gesbc9312_init_machine(void)
> MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
> /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h
> b/arch/arm/mach-ep93xx/irqs.h similarity index 96%
> rename from arch/arm/mach-ep93xx/include/mach/irqs.h
> rename to arch/arm/mach-ep93xx/irqs.h
> index 60c69c4ed7e1..353201b90c66 100644
> --- a/arch/arm/mach-ep93xx/include/mach/irqs.h
> +++ b/arch/arm/mach-ep93xx/irqs.h
> @@ -1,8 +1,4 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -/*
> - * arch/arm/mach-ep93xx/include/mach/irqs.h
> - */
> -
> #ifndef __ASM_ARCH_IRQS_H
> #define __ASM_ARCH_IRQS_H
>
> @@ -77,7 +73,4 @@
> #define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
> #define EP93XX_BOARD_IRQS 32
>
> -#define NR_IRQS (NR_EP93XX_IRQS +
> EP93XX_BOARD_IRQS) -
> -
> #endif
> diff --git a/arch/arm/mach-ep93xx/micro9.c
> b/arch/arm/mach-ep93xx/micro9.c index e6ead8ded6ee..c121c459aa17
> 100644 --- a/arch/arm/mach-ep93xx/micro9.c
> +++ b/arch/arm/mach-ep93xx/micro9.c
> @@ -76,6 +76,7 @@ static void __init micro9_init_machine(void)
> MACHINE_START(MICRO9, "Contec Micro9-High")
> /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at>
> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -88,6 +89,7 @@ MACHINE_END
> MACHINE_START(MICRO9M, "Contec Micro9-Mid")
> /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at>
> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -100,6 +102,7 @@ MACHINE_END
> MACHINE_START(MICRO9L, "Contec Micro9-Lite")
> /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at>
> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -112,6 +115,7 @@ MACHINE_END
> MACHINE_START(MICRO9S, "Contec Micro9-Slim")
> /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at>
> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/simone.c
> b/arch/arm/mach-ep93xx/simone.c index 5291053023b2..569e72413561
> 100644 --- a/arch/arm/mach-ep93xx/simone.c
> +++ b/arch/arm/mach-ep93xx/simone.c
> @@ -119,6 +119,7 @@ static void __init simone_init_machine(void)
> MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
> /* Maintainer: Ryan Mallon */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/snappercl15.c
> b/arch/arm/mach-ep93xx/snappercl15.c index e200d69471e9..1dfb725671b1
> 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c
> +++ b/arch/arm/mach-ep93xx/snappercl15.c
> @@ -153,6 +153,7 @@ static void __init snappercl15_init_machine(void)
> MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
> /* Maintainer: Ryan Mallon */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ep93xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
> index 94ef7f275f94..f0986e288d19 100644
> --- a/arch/arm/mach-ep93xx/soc.h
> +++ b/arch/arm/mach-ep93xx/soc.h
> @@ -10,6 +10,7 @@
> #define _EP93XX_SOC_H
>
> #include <mach/ep93xx-regs.h>
> +#include "irqs.h"
>
> /*
> * EP93xx Physical Memory Map:
> diff --git a/arch/arm/mach-ep93xx/ts72xx.c
> b/arch/arm/mach-ep93xx/ts72xx.c index 12eff8c8074d..e70bac011407
> 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c
> +++ b/arch/arm/mach-ep93xx/ts72xx.c
> @@ -22,7 +22,6 @@
>
> #include "gpio-ep93xx.h"
> #include "hardware.h"
> -#include <mach/irqs.h>
>
> #include <asm/mach-types.h>
> #include <asm/mach/map.h>
> @@ -350,6 +349,7 @@ static void __init ts72xx_init_machine(void)
> MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
> /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ts72xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> @@ -413,6 +413,7 @@ static void __init bk3_init_machine(void)
> MACHINE_START(BK3, "Liebherr controller BK3.1")
> /* Maintainer: Lukasz Majewski <lukma@denx.de> */
> .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS,
> .map_io = ts72xx_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
> diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c
> b/arch/arm/mach-ep93xx/vision_ep9307.c index
> e46281e60bf7..30d9cf3791eb 100644 ---
> a/arch/arm/mach-ep93xx/vision_ep9307.c +++
> b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -302,6 +302,7 @@ static
> void __init vision_init_machine(void) MACHINE_START(VISION_EP9307,
> "Vision Engraving Systems EP9307") /* Maintainer: H Hartley Sweeten
> <hsweeten@visionengravers.com> */ .atag_offset = 0x100,
> + .nr_irqs = NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
> .map_io = vision_map_io,
> .init_irq = ep93xx_init_irq,
> .init_time = ep93xx_timer_init,
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2022-04-05 9:45 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-05 9:17 [PATCH 00/12] ARM: ARMv5 multiplatform conversions Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-05 9:17 ` [PATCH 01/12] ARM: versatile: move integrator/realview/vexpress to versatile Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-05 14:15 ` Sudeep Holla
2022-04-05 14:15 ` Sudeep Holla
2022-04-05 18:33 ` Arnd Bergmann
2022-04-05 18:33 ` Arnd Bergmann
2022-04-05 16:30 ` Linus Walleij
2022-04-05 16:30 ` Linus Walleij
2022-04-05 9:17 ` [PATCH 02/12] ARM: ep93xx: renumber interrupts Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-05 9:42 ` Lukasz Majewski
2022-04-05 9:42 ` Lukasz Majewski
2022-04-07 8:29 ` Alexander Sverdlin
2022-04-07 8:29 ` Alexander Sverdlin
2022-04-05 9:17 ` [PATCH 03/12] ARM: ep93xx: enable SPARSE_IRQ Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-05 9:42 ` Lukasz Majewski [this message]
2022-04-05 9:42 ` Lukasz Majewski
2022-04-07 8:30 ` Alexander Sverdlin
2022-04-07 8:30 ` Alexander Sverdlin
2022-04-05 9:17 ` [PATCH 04/12] ARM: ep93xx: make mach/ep93xx-regs.h local Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-05 9:43 ` Lukasz Majewski
2022-04-05 9:43 ` Lukasz Majewski
2022-04-07 8:31 ` Alexander Sverdlin
2022-04-07 8:31 ` Alexander Sverdlin
2022-04-05 9:17 ` [PATCH 05/12] ARM: ep93xx: multiplatform support Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-05 9:44 ` Lukasz Majewski
2022-04-05 9:44 ` Lukasz Majewski
2022-04-07 8:32 ` Alexander Sverdlin
2022-04-07 8:32 ` Alexander Sverdlin
2022-04-05 9:17 ` [PATCH 06/12] ARM: dove: " Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-05 9:17 ` [PATCH 07/12] ARM: s3c24xx: remove support for ISA drivers on BAST PC/104 Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-07 7:27 ` Krzysztof Kozlowski
2022-04-07 7:27 ` Krzysztof Kozlowski
2022-04-05 9:17 ` [PATCH 08/12] ARM: s3c24xx: convert to sparse-irq Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-07 7:29 ` Krzysztof Kozlowski
2022-04-07 7:29 ` Krzysztof Kozlowski
2022-04-05 9:17 ` [PATCH 09/12] ARM: s3c: enable s3c24xx multiplatform support Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-07 7:30 ` Krzysztof Kozlowski
2022-04-07 7:30 ` Krzysztof Kozlowski
2022-04-05 9:17 ` [PATCH 10/12] ARM: iop32x: enable " Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-05 9:17 ` [PATCH 11/12] ARM: rework endianess selection Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-05 9:17 ` [PATCH 12/12] ARM: ixp4xx: enable multiplatform support Arnd Bergmann
2022-04-05 9:17 ` Arnd Bergmann
2022-04-07 7:07 ` [PATCH 00/12] ARM: ARMv5 multiplatform conversions Krzysztof Kozlowski
2022-04-07 7:07 ` Krzysztof Kozlowski
2022-04-07 7:31 ` Arnd Bergmann
2022-04-07 7:31 ` Arnd Bergmann
2022-04-07 9:23 ` Alexander Sverdlin
2022-04-07 9:23 ` Alexander Sverdlin
2022-04-07 10:08 ` Arnd Bergmann
2022-04-07 10:08 ` Arnd Bergmann
2022-04-07 10:37 ` Alexander Sverdlin
2022-04-07 10:37 ` Alexander Sverdlin
2022-04-07 20:42 ` Linus Walleij
2022-04-07 20:42 ` Linus Walleij
2022-04-08 15:12 ` Arnd Bergmann
2022-04-08 15:12 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220405114258.1ee218d6@ktm \
--to=lukma@denx.de \
--cc=alexander.sverdlin@gmail.com \
--cc=alim.akhtar@samsung.com \
--cc=andrew@lunn.ch \
--cc=ardb@kernel.org \
--cc=arnd@arndb.de \
--cc=arnd@kernel.org \
--cc=geert+renesas@glider.be \
--cc=gregory.clement@bootlin.com \
--cc=hsweeten@visionengravers.com \
--cc=hubert.feurstein@contec.at \
--cc=kaloz@openwrt.org \
--cc=khalasa@piap.pl \
--cc=krzk@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linux@simtec.co.uk \
--cc=liviu.dudau@arm.com \
--cc=lorenzo.pieralisi@arm.com \
--cc=patches@opensource.cirrus.com \
--cc=sboyd@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.