All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tudor Ambarus <tudor.ambarus@microchip.com>
To: <p.yadav@ti.com>, <michael@walle.cc>
Cc: <miquel.raynal@bootlin.com>, <richard@nod.at>, <vigneshr@ti.com>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<Takahiro.Kuwano@infineon.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>
Subject: [PATCH v4 00/11] mtd: spi-nor: Rework Octal DTR methods
Date: Wed, 20 Apr 2022 13:34:16 +0300	[thread overview]
Message-ID: <20220420103427.47867-1-tudor.ambarus@microchip.com> (raw)

v4:
- s/spi_nor_read_reg/spi_nor_read_any_reg and
s/spi_nor_write_reg/spi_nor_write_any_volatile_reg to comply with Micron
and Cypress's naming scheme. Update documentation description on
spi_nor_write_any_volatile_reg.
- 2 new patches, the last ones, where I remove status polling on write
volatile registers
- collect R-bs
v3:
- queue patch: "mtd: spi-nor: Introduce templates for SPI NOR operations"
from
https://lore.kernel.org/lkml/20220304093011.198173-1-tudor.ambarus@microchip.com/
The dependency chain between patches was too long and hard to follow.

- Rework patch "mtd: spi-nor: core: Use auto-detection only once"
according to Pratyush's and Michael's suggestions
- Remove dev_dbg messge from spi_nor_read_id() method and let the callers
use their own message (detection, octal dtr enable/disable)
- detailed version changes in each patch
 
v2:
- Fix bug on octal dtr disable, s/nor->reg_proto/SNOR_PROTO_1_1_1,
because after disable the nor->proto is not yet updated
- update function/macros names to comply with Michael's rename series.

Tudor Ambarus (11):
  mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_name
  mtd: spi-nor: Introduce spi_nor_match_id()
  mtd: spi-nor: core: Use auto-detection only once
  mtd: spi-nor: core: Introduce method for RDID op
  mtd: spi-nor: manufacturers: Use spi_nor_read_id() core method
  mtd: spi-nor: core: Add helpers to read/write any register
  mtd: spi-nor: micron-st: Rework spi_nor_micron_octal_dtr_enable()
  mtd: spi-nor: spansion: Rework spi_nor_cypress_octal_dtr_enable()
  mtd: spi-nor: Introduce templates for SPI NOR operations
  mtd: spi-nor: spansion: Remove status polling on volatile registers
    write
  mtd: spi-nor: micron-st: Remove status polling on volatile registers
    write

 drivers/mtd/spi-nor/core.c      | 254 ++++++++++++++++----------------
 drivers/mtd/spi-nor/core.h      | 115 +++++++++++++++
 drivers/mtd/spi-nor/micron-st.c | 139 ++++++++---------
 drivers/mtd/spi-nor/spansion.c  | 159 ++++++++++----------
 drivers/mtd/spi-nor/xilinx.c    |  12 +-
 5 files changed, 404 insertions(+), 275 deletions(-)

-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Tudor Ambarus <tudor.ambarus@microchip.com>
To: <p.yadav@ti.com>, <michael@walle.cc>
Cc: <miquel.raynal@bootlin.com>, <richard@nod.at>, <vigneshr@ti.com>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<Takahiro.Kuwano@infineon.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>
Subject: [PATCH v4 00/11] mtd: spi-nor: Rework Octal DTR methods
Date: Wed, 20 Apr 2022 13:34:16 +0300	[thread overview]
Message-ID: <20220420103427.47867-1-tudor.ambarus@microchip.com> (raw)

v4:
- s/spi_nor_read_reg/spi_nor_read_any_reg and
s/spi_nor_write_reg/spi_nor_write_any_volatile_reg to comply with Micron
and Cypress's naming scheme. Update documentation description on
spi_nor_write_any_volatile_reg.
- 2 new patches, the last ones, where I remove status polling on write
volatile registers
- collect R-bs
v3:
- queue patch: "mtd: spi-nor: Introduce templates for SPI NOR operations"
from
https://lore.kernel.org/lkml/20220304093011.198173-1-tudor.ambarus@microchip.com/
The dependency chain between patches was too long and hard to follow.

- Rework patch "mtd: spi-nor: core: Use auto-detection only once"
according to Pratyush's and Michael's suggestions
- Remove dev_dbg messge from spi_nor_read_id() method and let the callers
use their own message (detection, octal dtr enable/disable)
- detailed version changes in each patch
 
v2:
- Fix bug on octal dtr disable, s/nor->reg_proto/SNOR_PROTO_1_1_1,
because after disable the nor->proto is not yet updated
- update function/macros names to comply with Michael's rename series.

Tudor Ambarus (11):
  mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_name
  mtd: spi-nor: Introduce spi_nor_match_id()
  mtd: spi-nor: core: Use auto-detection only once
  mtd: spi-nor: core: Introduce method for RDID op
  mtd: spi-nor: manufacturers: Use spi_nor_read_id() core method
  mtd: spi-nor: core: Add helpers to read/write any register
  mtd: spi-nor: micron-st: Rework spi_nor_micron_octal_dtr_enable()
  mtd: spi-nor: spansion: Rework spi_nor_cypress_octal_dtr_enable()
  mtd: spi-nor: Introduce templates for SPI NOR operations
  mtd: spi-nor: spansion: Remove status polling on volatile registers
    write
  mtd: spi-nor: micron-st: Remove status polling on volatile registers
    write

 drivers/mtd/spi-nor/core.c      | 254 ++++++++++++++++----------------
 drivers/mtd/spi-nor/core.h      | 115 +++++++++++++++
 drivers/mtd/spi-nor/micron-st.c | 139 ++++++++---------
 drivers/mtd/spi-nor/spansion.c  | 159 ++++++++++----------
 drivers/mtd/spi-nor/xilinx.c    |  12 +-
 5 files changed, 404 insertions(+), 275 deletions(-)

-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

             reply	other threads:[~2022-04-20 10:34 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-20 10:34 Tudor Ambarus [this message]
2022-04-20 10:34 ` [PATCH v4 00/11] mtd: spi-nor: Rework Octal DTR methods Tudor Ambarus
2022-04-20 10:34 ` [PATCH v4 01/11] mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_name Tudor Ambarus
2022-04-20 10:34   ` Tudor Ambarus
2022-04-20 10:34 ` [PATCH v4 02/11] mtd: spi-nor: Introduce spi_nor_match_id() Tudor Ambarus
2022-04-20 10:34   ` Tudor Ambarus
2022-04-20 10:34 ` [PATCH v4 03/11] mtd: spi-nor: core: Use auto-detection only once Tudor Ambarus
2022-04-20 10:34   ` Tudor Ambarus
2022-04-21  7:18   ` Tudor.Ambarus
2022-04-21  7:18     ` Tudor.Ambarus
2022-04-21 13:16     ` Pratyush Yadav
2022-04-21 13:16       ` Pratyush Yadav
2022-04-21 13:41       ` Tudor.Ambarus
2022-04-21 13:41         ` Tudor.Ambarus
2022-04-27  5:20         ` Pratyush Yadav
2022-04-27  5:20           ` Pratyush Yadav
2022-04-27  7:13           ` Tudor.Ambarus
2022-04-27  7:13             ` Tudor.Ambarus
2022-04-20 10:34 ` [PATCH v4 04/11] mtd: spi-nor: core: Introduce method for RDID op Tudor Ambarus
2022-04-20 10:34   ` Tudor Ambarus
2022-04-20 10:34 ` [PATCH v4 05/11] mtd: spi-nor: manufacturers: Use spi_nor_read_id() core method Tudor Ambarus
2022-04-20 10:34   ` Tudor Ambarus
2022-04-20 10:34 ` [PATCH v4 06/11] mtd: spi-nor: core: Add helpers to read/write any register Tudor Ambarus
2022-04-20 10:34   ` Tudor Ambarus
2022-04-20 10:34 ` [PATCH v4 07/11] mtd: spi-nor: micron-st: Rework spi_nor_micron_octal_dtr_enable() Tudor Ambarus
2022-04-20 10:34   ` Tudor Ambarus
2022-04-20 10:34 ` [PATCH v4 08/11] mtd: spi-nor: spansion: Rework spi_nor_cypress_octal_dtr_enable() Tudor Ambarus
2022-04-20 10:34   ` Tudor Ambarus
2022-04-20 10:34 ` [PATCH v4 09/11] mtd: spi-nor: Introduce templates for SPI NOR operations Tudor Ambarus
2022-04-20 10:34   ` Tudor Ambarus
2022-04-20 10:34 ` [PATCH v4 10/11] mtd: spi-nor: spansion: Remove status polling on volatile registers write Tudor Ambarus
2022-04-20 10:34   ` Tudor Ambarus
2022-04-20 20:04   ` Michael Walle
2022-04-20 20:04     ` Michael Walle
2022-04-20 10:34 ` [PATCH v4 11/11] mtd: spi-nor: micron-st: " Tudor Ambarus
2022-04-20 10:34   ` Tudor Ambarus
2022-04-20 20:05   ` Michael Walle
2022-04-20 20:05     ` Michael Walle
2022-04-27  9:31 ` [PATCH v4 00/11] mtd: spi-nor: Rework Octal DTR methods Pratyush Yadav
2022-04-27  9:31   ` Pratyush Yadav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220420103427.47867-1-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=Takahiro.Kuwano@infineon.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=michael@walle.cc \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.yadav@ti.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.