All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: Jacopo Mondi <jacopo@jmondi.org>,
	Steve Longerbeam <slongerbeam@gmail.com>,
	laurent.pinchart@ideasonboard.com, hverkuil-cisco@xs4all.nl,
	mirela.rabulea@nxp.com, xavier.roumegue@oss.nxp.com,
	tomi.valkeinen@ideasonboard.com, hugues.fruchet@st.com,
	prabhakar.mahadev-lad.rj@bp.renesas.com, aford173@gmail.com,
	festevam@gmail.com, Eugen.Hristev@microchip.com,
	jbrunet@baylibre.com, paul.elder@ideasonboard.com,
	eddy.khan@vergesense.com,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: [PATCH v7 16/28] media: ov5640: Add VBLANK control
Date: Fri, 13 May 2022 17:15:36 +0300	[thread overview]
Message-ID: <20220513141548.6344-17-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20220513141548.6344-1-sakari.ailus@linux.intel.com>

From: Jacopo Mondi <jacopo@jmondi.org>

Add the VBLANK control which allows to select the duration of the
frame vertical blankings and allows to control the framerate.

The VBLANK control also modifies the exposure time range, which cannot
exceed the maximum frame length.

Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Tested-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/media/i2c/ov5640.c | 52 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index aa93cc980c410..4534821f4af0f 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -36,6 +36,10 @@
 #define OV5640_PIXEL_ARRAY_WIDTH	2592
 #define OV5640_PIXEL_ARRAY_HEIGHT	1944
 
+/* FIXME: not documented. */
+#define OV5640_MIN_VBLANK	24
+#define OV5640_MAX_VTS		3375
+
 #define OV5640_DEFAULT_SLAVE_ID 0x3c
 
 #define OV5640_LINK_RATE_MAX		490000000U
@@ -310,6 +314,7 @@ struct ov5640_ctrls {
 	struct v4l2_ctrl *pixel_rate;
 	struct v4l2_ctrl *link_freq;
 	struct v4l2_ctrl *hblank;
+	struct v4l2_ctrl *vblank;
 	struct {
 		struct v4l2_ctrl *auto_exp;
 		struct v4l2_ctrl *exposure;
@@ -2701,6 +2706,7 @@ static int ov5640_update_pixel_rate(struct ov5640_dev *sensor)
 	enum ov5640_pixel_rate_id pixel_rate_id = mode->pixel_rate;
 	struct v4l2_mbus_framefmt *fmt = &sensor->fmt;
 	const struct ov5640_timings *timings;
+	s32 exposure_val, exposure_max;
 	unsigned int hblank;
 	unsigned int i = 0;
 	u32 pixel_rate;
@@ -2764,6 +2770,19 @@ static int ov5640_update_pixel_rate(struct ov5640_dev *sensor)
 	__v4l2_ctrl_modify_range(sensor->ctrls.hblank,
 				 hblank, hblank, 1, hblank);
 
+	__v4l2_ctrl_modify_range(sensor->ctrls.vblank, OV5640_MIN_VBLANK,
+				 OV5640_MAX_VTS - mode->height, 1,
+				 timings->vblank_def);
+	__v4l2_ctrl_s_ctrl(sensor->ctrls.vblank, timings->vblank_def);
+
+	exposure_max = timings->crop.height + timings->vblank_def - 4;
+	exposure_val = clamp_t(s32, sensor->ctrls.exposure->val,
+			       sensor->ctrls.exposure->minimum,
+			       exposure_max);
+	__v4l2_ctrl_modify_range(sensor->ctrls.exposure,
+				 sensor->ctrls.exposure->minimum,
+				 exposure_max, 1, exposure_val);
+
 	return 0;
 }
 
@@ -3136,6 +3155,15 @@ static int ov5640_set_ctrl_vflip(struct ov5640_dev *sensor, int value)
 			      (BIT(2) | BIT(1)) : 0);
 }
 
+static int ov5640_set_ctrl_vblank(struct ov5640_dev *sensor, int value)
+{
+	const struct ov5640_mode_info *mode = sensor->current_mode;
+
+	/* Update the VTOT timing register value. */
+	return ov5640_write_reg16(sensor, OV5640_REG_TIMING_VTS,
+				  mode->height + value);
+}
+
 static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
@@ -3166,10 +3194,25 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
+	const struct ov5640_mode_info *mode = sensor->current_mode;
+	const struct ov5640_timings *timings;
+	unsigned int exp_max;
 	int ret;
 
 	/* v4l2_ctrl_lock() locks our own mutex */
 
+	switch (ctrl->id) {
+	case V4L2_CID_VBLANK:
+		/* Update the exposure range to the newly programmed vblank. */
+		timings = ov5640_timings(sensor, mode);
+		exp_max = mode->height + ctrl->val - 4;
+		__v4l2_ctrl_modify_range(sensor->ctrls.exposure,
+					 sensor->ctrls.exposure->minimum,
+					 exp_max, sensor->ctrls.exposure->step,
+					 timings->vblank_def);
+		break;
+	}
+
 	/*
 	 * If the device is not powered up by the host driver do
 	 * not apply any controls to H/W at this time. Instead
@@ -3209,6 +3252,9 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
 	case V4L2_CID_VFLIP:
 		ret = ov5640_set_ctrl_vflip(sensor, ctrl->val);
 		break;
+	case V4L2_CID_VBLANK:
+		ret = ov5640_set_ctrl_vblank(sensor, ctrl->val);
+		break;
 	default:
 		ret = -EINVAL;
 		break;
@@ -3229,6 +3275,7 @@ static int ov5640_init_controls(struct ov5640_dev *sensor)
 	struct ov5640_ctrls *ctrls = &sensor->ctrls;
 	struct v4l2_ctrl_handler *hdl = &ctrls->handler;
 	const struct ov5640_timings *timings;
+	unsigned int max_vblank;
 	unsigned int hblank;
 	int ret;
 
@@ -3254,6 +3301,11 @@ static int ov5640_init_controls(struct ov5640_dev *sensor)
 	ctrls->hblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HBLANK, hblank,
 					  hblank, 1, hblank);
 
+	max_vblank = OV5640_MAX_VTS - mode->height;
+	ctrls->vblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VBLANK,
+					  OV5640_MIN_VBLANK, max_vblank,
+					  1, timings->vblank_def);
+
 	/* Auto/manual white balance */
 	ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
 					   V4L2_CID_AUTO_WHITE_BALANCE,
-- 
2.30.2


  parent reply	other threads:[~2022-05-13 14:16 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-13 14:15 [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 01/28] media: ov5640: Add pixel rate to modes Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 02/28] media: ov5640: Re-arrange modes definition Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 03/28] media: ov5640: Add ov5640_is_csi2() function Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 04/28] media: ov5640: Associate bpp with formats Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 05/28] media: ov5640: Add LINK_FREQ control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 06/28] media: ov5640: Update pixel_rate and link_freq Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 07/28] media: ov5640: Rework CSI-2 clock tree Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 08/28] media: ov5640: Rework timings programming Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 09/28] media: ov5640: Fix 720x480 in RGB888 mode Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 10/28] media: ov5640: Split DVP and CSI-2 timings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 11/28] media: ov5640: Provide timings accessor Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 12/28] media: ov5640: Re-sort per-mode register tables Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 13/28] media: ov5640: Remove duplicated mode settings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 14/28] media: ov5640: Remove ov5640_mode_init_data Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 15/28] media: ov5640: Add HBLANK control Sakari Ailus
2022-05-13 14:15 ` Sakari Ailus [this message]
2022-05-13 14:15 ` [PATCH v7 17/28] media: ov5640: Adjust vblank with s_frame_interval Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 18/28] media: ov5640: Remove frame rate check from find_mode() Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 19/28] media: ov5640: Change CSI-2 timings to comply with FPS Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 20/28] media: ov5640: Implement init_cfg Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 21/28] media: ov5640: Implement get_selection Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 22/28] media: ov5640: Register device properties Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 23/28] media: ov5640: Add RGB565_1X16 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 24/28] media: ov5640: Add BGR888 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 25/28] media: ov5640: Restrict sizes to mbus code Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 26/28] media: ov5640: Adjust format to bpp in s_fmt Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 27/28] media: ov5640: Split DVP and CSI-2 formats Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 28/28] media: ov5640: Move format mux config in format Sakari Ailus
2022-05-13 14:24 ` [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Jacopo Mondi
  -- strict thread matches above, loose matches on Subject: below --
2022-05-13 14:13 Jacopo Mondi
2022-05-13 14:14 ` [PATCH v7 16/28] media: ov5640: Add VBLANK control Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220513141548.6344-17-sakari.ailus@linux.intel.com \
    --to=sakari.ailus@linux.intel.com \
    --cc=Eugen.Hristev@microchip.com \
    --cc=aford173@gmail.com \
    --cc=eddy.khan@vergesense.com \
    --cc=festevam@gmail.com \
    --cc=hugues.fruchet@st.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jacopo@jmondi.org \
    --cc=jbrunet@baylibre.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mirela.rabulea@nxp.com \
    --cc=paul.elder@ideasonboard.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=slongerbeam@gmail.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=xavier.roumegue@oss.nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.