All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: Jacopo Mondi <jacopo@jmondi.org>,
	Steve Longerbeam <slongerbeam@gmail.com>,
	laurent.pinchart@ideasonboard.com, hverkuil-cisco@xs4all.nl,
	mirela.rabulea@nxp.com, xavier.roumegue@oss.nxp.com,
	tomi.valkeinen@ideasonboard.com, hugues.fruchet@st.com,
	prabhakar.mahadev-lad.rj@bp.renesas.com, aford173@gmail.com,
	festevam@gmail.com, Eugen.Hristev@microchip.com,
	jbrunet@baylibre.com, paul.elder@ideasonboard.com,
	eddy.khan@vergesense.com,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: [PATCH v7 01/28] media: ov5640: Add pixel rate to modes
Date: Fri, 13 May 2022 17:15:21 +0300	[thread overview]
Message-ID: <20220513141548.6344-2-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20220513141548.6344-1-sakari.ailus@linux.intel.com>

From: Jacopo Mondi <jacopo@jmondi.org>

Add to each mode supported by the sensor the ideal pixel rate, as
defined by Table 2.1 in the chip manual.

The ideal pixel rate will be used to compute the MIPI CSI-2 clock tree.

Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Tested-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon-kit
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/media/i2c/ov5640.c | 44 +++++++++++++++++++++++++++++++++++---
 1 file changed, 41 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index db5a19babe67d..504700984fa01 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -118,6 +118,29 @@ enum ov5640_frame_rate {
 	OV5640_NUM_FRAMERATES,
 };
 
+enum ov5640_pixel_rate_id {
+	OV5640_PIXEL_RATE_168M,
+	OV5640_PIXEL_RATE_148M,
+	OV5640_PIXEL_RATE_124M,
+	OV5640_PIXEL_RATE_96M,
+	OV5640_PIXEL_RATE_48M,
+	OV5640_NUM_PIXEL_RATES,
+};
+
+/*
+ * The chip manual suggests 24/48/96/192 MHz pixel clocks.
+ *
+ * 192MHz exceeds the sysclk limits; use 168MHz as maximum pixel rate for
+ * full resolution mode @15 FPS.
+ */
+static const u32 ov5640_pixel_rates[] = {
+	[OV5640_PIXEL_RATE_168M] = 168000000,
+	[OV5640_PIXEL_RATE_148M] = 148000000,
+	[OV5640_PIXEL_RATE_124M] = 124000000,
+	[OV5640_PIXEL_RATE_96M] = 96000000,
+	[OV5640_PIXEL_RATE_48M] = 48000000,
+};
+
 enum ov5640_format_mux {
 	OV5640_FMT_MUX_YUV422 = 0,
 	OV5640_FMT_MUX_RGB,
@@ -189,6 +212,7 @@ struct reg_value {
 struct ov5640_mode_info {
 	enum ov5640_mode_id id;
 	enum ov5640_downsize_mode dn_mode;
+	enum ov5640_pixel_rate_id pixel_rate;
 	u32 hact;
 	u32 htot;
 	u32 vact;
@@ -565,7 +589,9 @@ static const struct reg_value ov5640_setting_QSXGA_2592_1944[] = {
 
 /* power-on sensor init reg table */
 static const struct ov5640_mode_info ov5640_mode_init_data = {
-	0, SUBSAMPLING, 640, 1896, 480, 984,
+	0, SUBSAMPLING,
+	OV5640_PIXEL_RATE_96M,
+	640, 1896, 480, 984,
 	ov5640_init_setting_30fps_VGA,
 	ARRAY_SIZE(ov5640_init_setting_30fps_VGA),
 	OV5640_30_FPS,
@@ -574,51 +600,61 @@ static const struct ov5640_mode_info ov5640_mode_init_data = {
 static const struct ov5640_mode_info
 ov5640_mode_data[OV5640_NUM_MODES] = {
 	{OV5640_MODE_QQVGA_160_120, SUBSAMPLING,
+	 OV5640_PIXEL_RATE_48M,
 	 160, 1896, 120, 984,
 	 ov5640_setting_QQVGA_160_120,
 	 ARRAY_SIZE(ov5640_setting_QQVGA_160_120),
 	 OV5640_30_FPS},
 	{OV5640_MODE_QCIF_176_144, SUBSAMPLING,
+	 OV5640_PIXEL_RATE_48M,
 	 176, 1896, 144, 984,
 	 ov5640_setting_QCIF_176_144,
 	 ARRAY_SIZE(ov5640_setting_QCIF_176_144),
 	 OV5640_30_FPS},
 	{OV5640_MODE_QVGA_320_240, SUBSAMPLING,
+	 OV5640_PIXEL_RATE_48M,
 	 320, 1896, 240, 984,
 	 ov5640_setting_QVGA_320_240,
 	 ARRAY_SIZE(ov5640_setting_QVGA_320_240),
 	 OV5640_30_FPS},
 	{OV5640_MODE_VGA_640_480, SUBSAMPLING,
+	 OV5640_PIXEL_RATE_48M,
 	 640, 1896, 480, 1080,
 	 ov5640_setting_VGA_640_480,
 	 ARRAY_SIZE(ov5640_setting_VGA_640_480),
 	 OV5640_60_FPS},
 	{OV5640_MODE_NTSC_720_480, SUBSAMPLING,
+	 OV5640_PIXEL_RATE_96M,
 	 720, 1896, 480, 984,
 	 ov5640_setting_NTSC_720_480,
 	 ARRAY_SIZE(ov5640_setting_NTSC_720_480),
 	OV5640_30_FPS},
 	{OV5640_MODE_PAL_720_576, SUBSAMPLING,
+	 OV5640_PIXEL_RATE_96M,
 	 720, 1896, 576, 984,
 	 ov5640_setting_PAL_720_576,
 	 ARRAY_SIZE(ov5640_setting_PAL_720_576),
 	 OV5640_30_FPS},
 	{OV5640_MODE_XGA_1024_768, SUBSAMPLING,
+	 OV5640_PIXEL_RATE_96M,
 	 1024, 1896, 768, 1080,
 	 ov5640_setting_XGA_1024_768,
 	 ARRAY_SIZE(ov5640_setting_XGA_1024_768),
 	 OV5640_30_FPS},
 	{OV5640_MODE_720P_1280_720, SUBSAMPLING,
+	 OV5640_PIXEL_RATE_124M,
 	 1280, 1892, 720, 740,
 	 ov5640_setting_720P_1280_720,
 	 ARRAY_SIZE(ov5640_setting_720P_1280_720),
 	 OV5640_30_FPS},
 	{OV5640_MODE_1080P_1920_1080, SCALING,
+	 OV5640_PIXEL_RATE_148M,
 	 1920, 2500, 1080, 1120,
 	 ov5640_setting_1080P_1920_1080,
 	 ARRAY_SIZE(ov5640_setting_1080P_1920_1080),
 	 OV5640_30_FPS},
 	{OV5640_MODE_QSXGA_2592_1944, SCALING,
+	 OV5640_PIXEL_RATE_168M,
 	 2592, 2844, 1944, 1968,
 	 ov5640_setting_QSXGA_2592_1944,
 	 ARRAY_SIZE(ov5640_setting_QSXGA_2592_1944),
@@ -2743,6 +2779,7 @@ static const struct v4l2_ctrl_ops ov5640_ctrl_ops = {
 
 static int ov5640_init_controls(struct ov5640_dev *sensor)
 {
+	const struct ov5640_mode_info *mode = sensor->current_mode;
 	const struct v4l2_ctrl_ops *ops = &ov5640_ctrl_ops;
 	struct ov5640_ctrls *ctrls = &sensor->ctrls;
 	struct v4l2_ctrl_handler *hdl = &ctrls->handler;
@@ -2755,8 +2792,9 @@ static int ov5640_init_controls(struct ov5640_dev *sensor)
 
 	/* Clock related controls */
 	ctrls->pixel_rate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE,
-					      0, INT_MAX, 1,
-					      ov5640_calc_pixel_rate(sensor));
+			      ov5640_pixel_rates[OV5640_NUM_PIXEL_RATES - 1],
+			      ov5640_pixel_rates[0], 1,
+			      ov5640_pixel_rates[mode->pixel_rate]);
 
 	/* Auto/manual white balance */
 	ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
-- 
2.30.2


  reply	other threads:[~2022-05-13 14:16 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-13 14:15 [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Sakari Ailus
2022-05-13 14:15 ` Sakari Ailus [this message]
2022-05-13 14:15 ` [PATCH v7 02/28] media: ov5640: Re-arrange modes definition Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 03/28] media: ov5640: Add ov5640_is_csi2() function Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 04/28] media: ov5640: Associate bpp with formats Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 05/28] media: ov5640: Add LINK_FREQ control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 06/28] media: ov5640: Update pixel_rate and link_freq Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 07/28] media: ov5640: Rework CSI-2 clock tree Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 08/28] media: ov5640: Rework timings programming Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 09/28] media: ov5640: Fix 720x480 in RGB888 mode Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 10/28] media: ov5640: Split DVP and CSI-2 timings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 11/28] media: ov5640: Provide timings accessor Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 12/28] media: ov5640: Re-sort per-mode register tables Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 13/28] media: ov5640: Remove duplicated mode settings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 14/28] media: ov5640: Remove ov5640_mode_init_data Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 15/28] media: ov5640: Add HBLANK control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 16/28] media: ov5640: Add VBLANK control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 17/28] media: ov5640: Adjust vblank with s_frame_interval Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 18/28] media: ov5640: Remove frame rate check from find_mode() Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 19/28] media: ov5640: Change CSI-2 timings to comply with FPS Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 20/28] media: ov5640: Implement init_cfg Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 21/28] media: ov5640: Implement get_selection Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 22/28] media: ov5640: Register device properties Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 23/28] media: ov5640: Add RGB565_1X16 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 24/28] media: ov5640: Add BGR888 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 25/28] media: ov5640: Restrict sizes to mbus code Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 26/28] media: ov5640: Adjust format to bpp in s_fmt Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 27/28] media: ov5640: Split DVP and CSI-2 formats Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 28/28] media: ov5640: Move format mux config in format Sakari Ailus
2022-05-13 14:24 ` [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Jacopo Mondi
  -- strict thread matches above, loose matches on Subject: below --
2022-05-13 14:13 Jacopo Mondi
2022-05-13 14:13 ` [PATCH v7 01/28] media: ov5640: Add pixel rate to modes Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220513141548.6344-2-sakari.ailus@linux.intel.com \
    --to=sakari.ailus@linux.intel.com \
    --cc=Eugen.Hristev@microchip.com \
    --cc=aford173@gmail.com \
    --cc=eddy.khan@vergesense.com \
    --cc=festevam@gmail.com \
    --cc=hugues.fruchet@st.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jacopo@jmondi.org \
    --cc=jbrunet@baylibre.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mirela.rabulea@nxp.com \
    --cc=paul.elder@ideasonboard.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=slongerbeam@gmail.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=xavier.roumegue@oss.nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.