All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yu Kuai <yukuai3@huawei.com>
To: <tj@kernel.org>, <mkoutny@suse.com>, <axboe@kernel.dk>,
	<ming.lei@redhat.com>
Cc: <cgroups@vger.kernel.org>, <linux-block@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <yukuai3@huawei.com>,
	<yi.zhang@huawei.com>
Subject: [PATCH -next v5 3/8] blk-throttle: factor out code to calculate ios/bytes_allowed
Date: Sat, 28 May 2022 14:43:25 +0800	[thread overview]
Message-ID: <20220528064330.3471000-4-yukuai3@huawei.com> (raw)
In-Reply-To: <20220528064330.3471000-1-yukuai3@huawei.com>

No functional changes, new apis will be used in later patches to
calculate wait time for throttled bios while updating config.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 block/blk-throttle.c | 48 +++++++++++++++++++++++++++-----------------
 1 file changed, 30 insertions(+), 18 deletions(-)

diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index a89c62bef2fb..d67b20ce4d63 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -754,25 +754,12 @@ static inline void throtl_trim_slice(struct throtl_grp *tg, bool rw)
 		   tg->slice_start[rw], tg->slice_end[rw], jiffies);
 }
 
-static bool tg_with_in_iops_limit(struct throtl_grp *tg, struct bio *bio,
-				  u32 iops_limit, unsigned long *wait)
+static unsigned int calculate_io_allowed(u32 iops_limit,
+					 unsigned long jiffy_elapsed_rnd)
 {
-	bool rw = bio_data_dir(bio);
 	unsigned int io_allowed;
-	unsigned long jiffy_elapsed, jiffy_wait, jiffy_elapsed_rnd;
 	u64 tmp;
 
-	if (iops_limit == UINT_MAX) {
-		if (wait)
-			*wait = 0;
-		return true;
-	}
-
-	jiffy_elapsed = jiffies - tg->slice_start[rw];
-
-	/* Round up to the next throttle slice, wait time must be nonzero */
-	jiffy_elapsed_rnd = roundup(jiffy_elapsed + 1, tg->td->throtl_slice);
-
 	/*
 	 * jiffy_elapsed_rnd should not be a big value as minimum iops can be
 	 * 1 then at max jiffy elapsed should be equivalent of 1 second as we
@@ -788,6 +775,33 @@ static bool tg_with_in_iops_limit(struct throtl_grp *tg, struct bio *bio,
 	else
 		io_allowed = tmp;
 
+	return io_allowed;
+}
+
+static u64 calculate_bytes_allowed(u64 bps_limit,
+				   unsigned long jiffy_elapsed_rnd)
+{
+	return mul_u64_u64_div_u64(bps_limit, (u64)jiffy_elapsed_rnd, (u64)HZ);
+}
+
+static bool tg_with_in_iops_limit(struct throtl_grp *tg, struct bio *bio,
+				  u32 iops_limit, unsigned long *wait)
+{
+	bool rw = bio_data_dir(bio);
+	unsigned int io_allowed;
+	unsigned long jiffy_elapsed, jiffy_wait, jiffy_elapsed_rnd;
+
+	if (iops_limit == UINT_MAX) {
+		if (wait)
+			*wait = 0;
+		return true;
+	}
+
+	jiffy_elapsed = jiffies - tg->slice_start[rw];
+
+	/* Round up to the next throttle slice, wait time must be nonzero */
+	jiffy_elapsed_rnd = roundup(jiffy_elapsed + 1, tg->td->throtl_slice);
+	io_allowed = calculate_io_allowed(iops_limit, jiffy_elapsed_rnd);
 	if (tg->io_disp[rw] + 1 <= io_allowed) {
 		if (wait)
 			*wait = 0;
@@ -824,9 +838,7 @@ static bool tg_with_in_bps_limit(struct throtl_grp *tg, struct bio *bio,
 		jiffy_elapsed_rnd = tg->td->throtl_slice;
 
 	jiffy_elapsed_rnd = roundup(jiffy_elapsed_rnd, tg->td->throtl_slice);
-	bytes_allowed = mul_u64_u64_div_u64(bps_limit, (u64)jiffy_elapsed_rnd,
-					    (u64)HZ);
-
+	bytes_allowed = calculate_bytes_allowed(bps_limit, jiffy_elapsed_rnd);
 	if (tg->bytes_disp[rw] + bio_size <= bytes_allowed) {
 		if (wait)
 			*wait = 0;
-- 
2.31.1


WARNING: multiple messages have this Message-ID (diff)
From: Yu Kuai <yukuai3-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	mkoutny-IBi9RG/b67k@public.gmane.org,
	axboe-tSWWG44O7X1aa/9Udqfwiw@public.gmane.org,
	ming.lei-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: cgroups-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-block-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	yukuai3-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
	yi.zhang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org
Subject: [PATCH -next v5 3/8] blk-throttle: factor out code to calculate ios/bytes_allowed
Date: Sat, 28 May 2022 14:43:25 +0800	[thread overview]
Message-ID: <20220528064330.3471000-4-yukuai3@huawei.com> (raw)
In-Reply-To: <20220528064330.3471000-1-yukuai3-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>

No functional changes, new apis will be used in later patches to
calculate wait time for throttled bios while updating config.

Signed-off-by: Yu Kuai <yukuai3-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 block/blk-throttle.c | 48 +++++++++++++++++++++++++++-----------------
 1 file changed, 30 insertions(+), 18 deletions(-)

diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index a89c62bef2fb..d67b20ce4d63 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -754,25 +754,12 @@ static inline void throtl_trim_slice(struct throtl_grp *tg, bool rw)
 		   tg->slice_start[rw], tg->slice_end[rw], jiffies);
 }
 
-static bool tg_with_in_iops_limit(struct throtl_grp *tg, struct bio *bio,
-				  u32 iops_limit, unsigned long *wait)
+static unsigned int calculate_io_allowed(u32 iops_limit,
+					 unsigned long jiffy_elapsed_rnd)
 {
-	bool rw = bio_data_dir(bio);
 	unsigned int io_allowed;
-	unsigned long jiffy_elapsed, jiffy_wait, jiffy_elapsed_rnd;
 	u64 tmp;
 
-	if (iops_limit == UINT_MAX) {
-		if (wait)
-			*wait = 0;
-		return true;
-	}
-
-	jiffy_elapsed = jiffies - tg->slice_start[rw];
-
-	/* Round up to the next throttle slice, wait time must be nonzero */
-	jiffy_elapsed_rnd = roundup(jiffy_elapsed + 1, tg->td->throtl_slice);
-
 	/*
 	 * jiffy_elapsed_rnd should not be a big value as minimum iops can be
 	 * 1 then at max jiffy elapsed should be equivalent of 1 second as we
@@ -788,6 +775,33 @@ static bool tg_with_in_iops_limit(struct throtl_grp *tg, struct bio *bio,
 	else
 		io_allowed = tmp;
 
+	return io_allowed;
+}
+
+static u64 calculate_bytes_allowed(u64 bps_limit,
+				   unsigned long jiffy_elapsed_rnd)
+{
+	return mul_u64_u64_div_u64(bps_limit, (u64)jiffy_elapsed_rnd, (u64)HZ);
+}
+
+static bool tg_with_in_iops_limit(struct throtl_grp *tg, struct bio *bio,
+				  u32 iops_limit, unsigned long *wait)
+{
+	bool rw = bio_data_dir(bio);
+	unsigned int io_allowed;
+	unsigned long jiffy_elapsed, jiffy_wait, jiffy_elapsed_rnd;
+
+	if (iops_limit == UINT_MAX) {
+		if (wait)
+			*wait = 0;
+		return true;
+	}
+
+	jiffy_elapsed = jiffies - tg->slice_start[rw];
+
+	/* Round up to the next throttle slice, wait time must be nonzero */
+	jiffy_elapsed_rnd = roundup(jiffy_elapsed + 1, tg->td->throtl_slice);
+	io_allowed = calculate_io_allowed(iops_limit, jiffy_elapsed_rnd);
 	if (tg->io_disp[rw] + 1 <= io_allowed) {
 		if (wait)
 			*wait = 0;
@@ -824,9 +838,7 @@ static bool tg_with_in_bps_limit(struct throtl_grp *tg, struct bio *bio,
 		jiffy_elapsed_rnd = tg->td->throtl_slice;
 
 	jiffy_elapsed_rnd = roundup(jiffy_elapsed_rnd, tg->td->throtl_slice);
-	bytes_allowed = mul_u64_u64_div_u64(bps_limit, (u64)jiffy_elapsed_rnd,
-					    (u64)HZ);
-
+	bytes_allowed = calculate_bytes_allowed(bps_limit, jiffy_elapsed_rnd);
 	if (tg->bytes_disp[rw] + bio_size <= bytes_allowed) {
 		if (wait)
 			*wait = 0;
-- 
2.31.1


  parent reply	other threads:[~2022-05-28  6:31 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-28  6:43 [PATCH -next v5 0/8] bugfix and cleanup for blk-throttle Yu Kuai
2022-05-28  6:43 ` Yu Kuai
2022-05-28  6:43 ` [PATCH -next v5 1/8] blk-throttle: fix that io throttle can only work for single bio Yu Kuai
2022-05-28  6:43   ` Yu Kuai
2022-05-28  6:43 ` [PATCH -next v5 2/8] blk-throttle: prevent overflow while calculating wait time Yu Kuai
2022-05-28  6:43   ` Yu Kuai
2022-05-28  6:43 ` Yu Kuai [this message]
2022-05-28  6:43   ` [PATCH -next v5 3/8] blk-throttle: factor out code to calculate ios/bytes_allowed Yu Kuai
2022-06-22 17:27   ` Michal Koutný
2022-06-23 12:03     ` Yu Kuai
2022-06-23 12:03       ` Yu Kuai
2022-05-28  6:43 ` [PATCH -next v5 4/8] blk-throttle: fix io hung due to config updates Yu Kuai
2022-05-28  6:43   ` Yu Kuai
2022-06-22 17:26   ` Michal Koutný
2022-06-23 12:27     ` Yu Kuai
2022-06-23 12:27       ` Yu Kuai
2022-06-23 16:26       ` Michal Koutný
2022-06-25  8:36         ` Yu Kuai
2022-06-25  8:36           ` Yu Kuai
2022-06-25 16:41           ` Jens Axboe
2022-06-25 16:41             ` Jens Axboe
2022-06-26  2:39             ` Yu Kuai
2022-06-26  2:39               ` Yu Kuai
2022-07-05 11:42             ` Yu Kuai
2022-07-05 11:42               ` Yu Kuai
2022-05-28  6:43 ` [PATCH -next v5 5/8] blk-throttle: use 'READ/WRITE' instead of '0/1' Yu Kuai
2022-05-28  6:43   ` Yu Kuai
2022-05-28  6:43 ` [PATCH -next v5 6/8] blk-throttle: calling throtl_dequeue/enqueue_tg in pairs Yu Kuai
2022-05-28  6:43   ` Yu Kuai
2022-05-28  6:43 ` [PATCH -next v5 7/8] blk-throttle: cleanup tg_update_disptime() Yu Kuai
2022-05-28  6:43   ` Yu Kuai
2022-05-28  6:43 ` [PATCH -next v5 8/8] blk-throttle: clean up flag 'THROTL_TG_PENDING' Yu Kuai
2022-05-28  6:43   ` Yu Kuai
2022-06-02 11:14 ` [PATCH -next v5 0/8] bugfix and cleanup for blk-throttle Yu Kuai
2022-06-02 11:14   ` Yu Kuai
2022-06-09  0:59   ` Yu Kuai
2022-06-09  0:59     ` Yu Kuai
2022-06-17  1:15     ` Yu Kuai
2022-06-17  1:15       ` Yu Kuai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220528064330.3471000-4-yukuai3@huawei.com \
    --to=yukuai3@huawei.com \
    --cc=axboe@kernel.dk \
    --cc=cgroups@vger.kernel.org \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ming.lei@redhat.com \
    --cc=mkoutny@suse.com \
    --cc=tj@kernel.org \
    --cc=yi.zhang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.