* [PATCH] pinctrl: imx: Add the zero base flag for imx93
@ 2022-06-13 3:18 Jacky Bai
2022-06-23 1:41 ` Jacky Bai
2022-06-28 13:17 ` Linus Walleij
0 siblings, 2 replies; 5+ messages in thread
From: Jacky Bai @ 2022-06-13 3:18 UTC (permalink / raw)
To: linus.walleij, shawnguo, aisheng.dong
Cc: festevam, kernel, linux-imx, linux-gpio
On i.MX93, the pin mux reg offset is from 0x0,
so need to add the 'ZERO_OFFSET_VALID' flag to make
sure the pin at mux offset 0 can be found.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
---
drivers/pinctrl/freescale/pinctrl-imx93.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pinctrl/freescale/pinctrl-imx93.c b/drivers/pinctrl/freescale/pinctrl-imx93.c
index c0630f69e995..417e41b37a6f 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx93.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx93.c
@@ -239,6 +239,7 @@ static const struct pinctrl_pin_desc imx93_pinctrl_pads[] = {
static const struct imx_pinctrl_soc_info imx93_pinctrl_info = {
.pins = imx93_pinctrl_pads,
.npins = ARRAY_SIZE(imx93_pinctrl_pads),
+ .flags = ZERO_OFFSET_VALID,
.gpr_compatible = "fsl,imx93-iomuxc-gpr",
};
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* RE: [PATCH] pinctrl: imx: Add the zero base flag for imx93
2022-06-13 3:18 [PATCH] pinctrl: imx: Add the zero base flag for imx93 Jacky Bai
@ 2022-06-23 1:41 ` Jacky Bai
2022-06-28 13:17 ` Linus Walleij
1 sibling, 0 replies; 5+ messages in thread
From: Jacky Bai @ 2022-06-23 1:41 UTC (permalink / raw)
To: linus.walleij, shawnguo, Aisheng Dong
Cc: festevam, kernel, dl-linux-imx, linux-gpio
Ping...
BR
> Subject: [PATCH] pinctrl: imx: Add the zero base flag for imx93
>
> On i.MX93, the pin mux reg offset is from 0x0, so need to add the
> 'ZERO_OFFSET_VALID' flag to make sure the pin at mux offset 0 can be found.
>
> Signed-off-by: Jacky Bai <ping.bai@nxp.com>
> ---
> drivers/pinctrl/freescale/pinctrl-imx93.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pinctrl/freescale/pinctrl-imx93.c
> b/drivers/pinctrl/freescale/pinctrl-imx93.c
> index c0630f69e995..417e41b37a6f 100644
> --- a/drivers/pinctrl/freescale/pinctrl-imx93.c
> +++ b/drivers/pinctrl/freescale/pinctrl-imx93.c
> @@ -239,6 +239,7 @@ static const struct pinctrl_pin_desc
> imx93_pinctrl_pads[] = { static const struct imx_pinctrl_soc_info
> imx93_pinctrl_info = {
> .pins = imx93_pinctrl_pads,
> .npins = ARRAY_SIZE(imx93_pinctrl_pads),
> + .flags = ZERO_OFFSET_VALID,
> .gpr_compatible = "fsl,imx93-iomuxc-gpr", };
>
> --
> 2.25.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] pinctrl: imx: Add the zero base flag for imx93
2022-06-13 3:18 [PATCH] pinctrl: imx: Add the zero base flag for imx93 Jacky Bai
2022-06-23 1:41 ` Jacky Bai
@ 2022-06-28 13:17 ` Linus Walleij
2022-07-04 6:04 ` Jacky Bai
1 sibling, 1 reply; 5+ messages in thread
From: Linus Walleij @ 2022-06-28 13:17 UTC (permalink / raw)
To: Jacky Bai, Sascha Hauer
Cc: shawnguo, aisheng.dong, festevam, linux-imx, linux-gpio
On Mon, Jun 13, 2022 at 5:17 AM Jacky Bai <ping.bai@nxp.com> wrote:
> On i.MX93, the pin mux reg offset is from 0x0,
> so need to add the 'ZERO_OFFSET_VALID' flag to make
> sure the pin at mux offset 0 can be found.
>
> Signed-off-by: Jacky Bai <ping.bai@nxp.com>
No reply from maintainers for an urgent fix for two weeks -> patch applied.
Jacky, maybe you should be listed as comaintainer for the freescale
pin controller if you are doing active maintenance on it?
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [PATCH] pinctrl: imx: Add the zero base flag for imx93
2022-06-28 13:17 ` Linus Walleij
@ 2022-07-04 6:04 ` Jacky Bai
2022-07-06 12:51 ` Linus Walleij
0 siblings, 1 reply; 5+ messages in thread
From: Jacky Bai @ 2022-07-04 6:04 UTC (permalink / raw)
To: Linus Walleij, Sascha Hauer
Cc: shawnguo, Aisheng Dong, festevam, dl-linux-imx, linux-gpio
> Subject: Re: [PATCH] pinctrl: imx: Add the zero base flag for imx93
>
> On Mon, Jun 13, 2022 at 5:17 AM Jacky Bai <ping.bai@nxp.com> wrote:
>
> > On i.MX93, the pin mux reg offset is from 0x0, so need to add the
> > 'ZERO_OFFSET_VALID' flag to make sure the pin at mux offset 0 can be
> > found.
> >
> > Signed-off-by: Jacky Bai <ping.bai@nxp.com>
>
> No reply from maintainers for an urgent fix for two weeks -> patch applied.
>
> Jacky, maybe you should be listed as comaintainer for the freescale pin
> controller if you are doing active maintenance on it?
>
Yes, I can help on this.
BR
> Yours,
> Linus Walleij
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] pinctrl: imx: Add the zero base flag for imx93
2022-07-04 6:04 ` Jacky Bai
@ 2022-07-06 12:51 ` Linus Walleij
0 siblings, 0 replies; 5+ messages in thread
From: Linus Walleij @ 2022-07-06 12:51 UTC (permalink / raw)
To: Jacky Bai
Cc: Sascha Hauer, shawnguo, Aisheng Dong, festevam, dl-linux-imx, linux-gpio
On Mon, Jul 4, 2022 at 8:04 AM Jacky Bai <ping.bai@nxp.com> wrote:
> > Subject: Re: [PATCH] pinctrl: imx: Add the zero base flag for imx93
> > On Mon, Jun 13, 2022 at 5:17 AM Jacky Bai <ping.bai@nxp.com> wrote:
> >
> > > On i.MX93, the pin mux reg offset is from 0x0, so need to add the
> > > 'ZERO_OFFSET_VALID' flag to make sure the pin at mux offset 0 can be
> > > found.
> > >
> > > Signed-off-by: Jacky Bai <ping.bai@nxp.com>
> >
> > No reply from maintainers for an urgent fix for two weeks -> patch applied.
> >
> > Jacky, maybe you should be listed as comaintainer for the freescale pin
> > controller if you are doing active maintenance on it?
>
> Yes, I can help on this.
Please send a patch to MAINATINERS adding yourself as maintainer
and CC the other maintainers listed there.
Maybe you have some internal NXP mail list and procedure to follow
too, no idea :D discuss amongs yourselves if necessary, but I really
like active maintainers.
Thanks!
Linus Walleij
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-07-06 12:51 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-06-13 3:18 [PATCH] pinctrl: imx: Add the zero base flag for imx93 Jacky Bai
2022-06-23 1:41 ` Jacky Bai
2022-06-28 13:17 ` Linus Walleij
2022-07-04 6:04 ` Jacky Bai
2022-07-06 12:51 ` Linus Walleij
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.