From: Samuel Holland <samuel@sholland.org>
To: Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Holland <samuel@sholland.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Maxime Ripard <mripard@kernel.org>, Ondrej Jirman <x@xff.cz>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sunxi@lists.linux.dev
Subject: [PATCH 0/6] pinctrl: sunxi: Allwinner D1/D1s support
Date: Sat, 25 Jun 2022 21:11:41 -0500 [thread overview]
Message-ID: <20220626021148.56740-1-samuel@sholland.org> (raw)
This series adds pinctrl support for the Allwinner D1/D1s SoCs. First,
it updates the I/O bias code to support the new mode found on the D1/D1s
(as well as some existing SoCs). Then it refactors the driver to support
the new register layout found on the D1/D1s. Finally, it adds the new
driver.
The code size impact of the dynamic register layout ends up being just
over 100 bytes:
text data bss dec hex filename
11293 564 0 11857 2e51 pinctrl-sunxi.o (patch 3)
11405 564 0 11969 2ec1 pinctrl-sunxi.o (patch 6)
This series was tested on A64, H6, and D1.
Samuel Holland (6):
dt-bindings: pinctrl: Add compatibles for Allwinner D1/D1s
pinctrl: sunxi: Add I/O bias setting for H6 R-PIO
pinctrl: sunxi: Support the 2.5V I/O bias mode
pinctrl: sunxi: Refactor register/offset calculation
pinctrl: sunxi: Make some layout parameters dynamic
pinctrl: sunxi: Add driver for Allwinner D1/D1s
.../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 15 +
drivers/pinctrl/sunxi/Kconfig | 5 +
drivers/pinctrl/sunxi/Makefile | 1 +
drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c | 860 ++++++++++++++++++
drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c | 2 +-
drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c | 2 +-
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 156 +++-
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 110 +--
10 files changed, 1022 insertions(+), 131 deletions(-)
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c
--
2.35.1
WARNING: multiple messages have this Message-ID (diff)
From: Samuel Holland <samuel@sholland.org>
To: Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Holland <samuel@sholland.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Maxime Ripard <mripard@kernel.org>, Ondrej Jirman <x@xff.cz>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sunxi@lists.linux.dev
Subject: [PATCH 0/6] pinctrl: sunxi: Allwinner D1/D1s support
Date: Sat, 25 Jun 2022 21:11:41 -0500 [thread overview]
Message-ID: <20220626021148.56740-1-samuel@sholland.org> (raw)
This series adds pinctrl support for the Allwinner D1/D1s SoCs. First,
it updates the I/O bias code to support the new mode found on the D1/D1s
(as well as some existing SoCs). Then it refactors the driver to support
the new register layout found on the D1/D1s. Finally, it adds the new
driver.
The code size impact of the dynamic register layout ends up being just
over 100 bytes:
text data bss dec hex filename
11293 564 0 11857 2e51 pinctrl-sunxi.o (patch 3)
11405 564 0 11969 2ec1 pinctrl-sunxi.o (patch 6)
This series was tested on A64, H6, and D1.
Samuel Holland (6):
dt-bindings: pinctrl: Add compatibles for Allwinner D1/D1s
pinctrl: sunxi: Add I/O bias setting for H6 R-PIO
pinctrl: sunxi: Support the 2.5V I/O bias mode
pinctrl: sunxi: Refactor register/offset calculation
pinctrl: sunxi: Make some layout parameters dynamic
pinctrl: sunxi: Add driver for Allwinner D1/D1s
.../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 15 +
drivers/pinctrl/sunxi/Kconfig | 5 +
drivers/pinctrl/sunxi/Makefile | 1 +
drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c | 860 ++++++++++++++++++
drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c | 2 +-
drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c | 2 +-
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 156 +++-
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 110 +--
10 files changed, 1022 insertions(+), 131 deletions(-)
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-06-26 2:11 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-26 2:11 Samuel Holland [this message]
2022-06-26 2:11 ` [PATCH 0/6] pinctrl: sunxi: Allwinner D1/D1s support Samuel Holland
2022-06-26 2:11 ` [PATCH 1/6] dt-bindings: pinctrl: Add compatibles for Allwinner D1/D1s Samuel Holland
2022-06-26 2:11 ` Samuel Holland
2022-06-26 10:37 ` Krzysztof Kozlowski
2022-06-26 10:37 ` Krzysztof Kozlowski
2022-07-01 13:02 ` Heiko Stuebner
2022-07-01 13:02 ` Heiko Stuebner
2022-07-11 8:58 ` Linus Walleij
2022-07-11 8:58 ` Linus Walleij
2022-07-12 10:14 ` Samuel Holland
2022-07-12 10:14 ` Samuel Holland
2022-07-13 2:56 ` Samuel Holland
2022-07-13 2:56 ` Samuel Holland
2022-06-26 2:11 ` [PATCH 2/6] pinctrl: sunxi: Add I/O bias setting for H6 R-PIO Samuel Holland
2022-06-26 2:11 ` Samuel Holland
2022-06-27 20:34 ` Jernej Škrabec
2022-06-27 20:34 ` Jernej Škrabec
2022-06-28 3:18 ` Samuel Holland
2022-06-28 3:18 ` Samuel Holland
2022-07-01 13:03 ` Heiko Stuebner
2022-07-01 13:03 ` Heiko Stuebner
2022-06-26 2:11 ` [PATCH 3/6] pinctrl: sunxi: Support the 2.5V I/O bias mode Samuel Holland
2022-06-26 2:11 ` Samuel Holland
2022-06-27 20:43 ` Jernej Škrabec
2022-06-27 20:43 ` Jernej Škrabec
2022-06-28 3:29 ` Samuel Holland
2022-06-28 3:29 ` Samuel Holland
2022-07-02 19:48 ` Jernej Škrabec
2022-07-02 19:48 ` Jernej Škrabec
2022-07-01 13:04 ` Heiko Stuebner
2022-07-01 13:04 ` Heiko Stuebner
2022-06-26 2:11 ` [PATCH 4/6] pinctrl: sunxi: Refactor register/offset calculation Samuel Holland
2022-06-26 2:11 ` Samuel Holland
2022-07-01 13:07 ` Heiko Stuebner
2022-07-01 13:07 ` Heiko Stuebner
2022-07-02 20:29 ` Jernej Škrabec
2022-07-02 20:29 ` Jernej Škrabec
2022-06-26 2:11 ` [PATCH 5/6] pinctrl: sunxi: Make some layout parameters dynamic Samuel Holland
2022-06-26 2:11 ` Samuel Holland
2022-07-01 13:09 ` Heiko Stuebner
2022-07-01 13:09 ` Heiko Stuebner
2022-07-02 20:33 ` Jernej Škrabec
2022-07-02 20:33 ` Jernej Škrabec
2022-06-26 2:11 ` [PATCH 6/6] pinctrl: sunxi: Add driver for Allwinner D1/D1s Samuel Holland
2022-06-26 2:11 ` Samuel Holland
2022-07-01 13:13 ` Heiko Stuebner
2022-07-01 13:13 ` Heiko Stuebner
2022-07-01 15:16 ` Samuel Holland
2022-07-01 15:16 ` Samuel Holland
2022-07-02 14:47 ` Andre Przywara
2022-07-02 14:47 ` Andre Przywara
2022-07-02 15:43 ` Samuel Holland
2022-07-02 15:43 ` Samuel Holland
2022-07-04 9:42 ` Andre Przywara
2022-07-04 9:42 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220626021148.56740-1-samuel@sholland.org \
--to=samuel@sholland.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
--cc=x@xff.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.