From: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> To: <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <claudiu.beznea@microchip.com>, <UNGLinuxDriver@microchip.com> Cc: <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <Kavyasree.Kotagiri@microchip.com> Subject: [PATCH v8 1/3] dt-bindings: mfd: Convert atmel-flexcom to json-schema Date: Fri, 8 Jul 2022 09:56:17 -0200 [thread overview] Message-ID: <20220708115619.254073-2-kavyasree.kotagiri@microchip.com> (raw) In-Reply-To: <20220708115619.254073-1-kavyasree.kotagiri@microchip.com> Convert the Atmel flexcom device tree bindings to json schema. Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> --- v7 -> v8: - Added back patternProperties for child nodes. v6 -> v7: - Change filename to atmel,sama5d2-flexcom.yaml - Add #address-cells, #size-cells to flexcom node - Fixed warnings. v5 -> v6: - Removed spi node from example as suggested by Rob and also pattern properties(spi dt-bindings conversion to yaml patch is under review). Once that is accepted, I will add back spi example through new patch. v4 -> v5: - Fixed indentations. v3 -> v4: - Corrected format of enum used for compatible string. v2 -> v3: - used enum for compatible string. - changed irq flag to IRQ_TYPE_LEVEL_HIGH in example. - fixed dtschema errors. v1 -> v2: - Fix title. .../bindings/mfd/atmel,sama5d2-flexcom.yaml | 92 +++++++++++++++++++ .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------------- 2 files changed, 92 insertions(+), 63 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt diff --git a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml new file mode 100644 index 000000000000..bfa7d340a198 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Flexcom (Flexible Serial Communication Unit) + +maintainers: + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> + +description: + The Atmel Flexcom is just a wrapper which embeds a SPI controller, + an I2C controller and an USART. Only one function can be used at a + time and is chosen at boot time according to the device tree. + +properties: + compatible: + enum: + - atmel,sama5d2-flexcom + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + description: + One range for the full I/O register region. (including USART, + TWI and SPI registers). + items: + maxItems: 3 + + atmel,flexcom-mode: + description: | + Specifies the flexcom mode as follows: + 1: USART + 2: SPI + 3: I2C. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3] + +patternProperties: + "^serial@[0-9a-f]+$": + type: object + description: + Child node describing USART. See atmel-usart.txt for details + of USART bindings. + + "^spi@[0-9a-f]+$": + type: object + description: + Child node describing SPI. See ../spi/spi_atmel.txt for details + of SPI bindings. + + "^i2c@[0-9a-f]+$": + $ref: ../i2c/atmel,at91sam-i2c.yaml + description: + Child node describing I2C. + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + - ranges + - atmel,flexcom-mode + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + flx0: flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + atmel,flexcom-mode = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt deleted file mode 100644 index 9d837535637b..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt +++ /dev/null @@ -1,63 +0,0 @@ -* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) - -The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C -controller and an USART. Only one function can be used at a time and is chosen -at boot time according to the device tree. - -Required properties: -- compatible: Should be "atmel,sama5d2-flexcom" -- reg: Should be the offset/length value for Flexcom dedicated - I/O registers (without USART, TWI or SPI registers). -- clocks: Should be the Flexcom peripheral clock from PMC. -- #address-cells: Should be <1> -- #size-cells: Should be <1> -- ranges: Should be one range for the full I/O register region - (including USART, TWI and SPI registers). -- atmel,flexcom-mode: Should be one of the following values: - - <1> for USART - - <2> for SPI - - <3> for I2C - -Required child: -A single available child device of type matching the "atmel,flexcom-mode" -property. - -The phandle provided by the clocks property of the child is the same as one for -the Flexcom parent. - -For other properties, please refer to the documentations of the respective -device: -- ../serial/atmel-usart.txt -- ../spi/spi_atmel.txt -- ../i2c/i2c-at91.txt - -Example: - -flexcom@f8034000 { - compatible = "atmel,sama5d2-flexcom"; - reg = <0xf8034000 0x200>; - clocks = <&flx0_clk>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xf8034000 0x800>; - atmel,flexcom-mode = <2>; - - spi@400 { - compatible = "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flx0_default>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&flx0_clk>; - clock-names = "spi_clk"; - atmel,fifo-size = <32>; - - flash@0 { - compatible = "atmel,at25f512b"; - reg = <0>; - spi-max-frequency = <20000000>; - }; - }; -}; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> To: <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <claudiu.beznea@microchip.com>, <UNGLinuxDriver@microchip.com> Cc: <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <Kavyasree.Kotagiri@microchip.com> Subject: [PATCH v8 1/3] dt-bindings: mfd: Convert atmel-flexcom to json-schema Date: Fri, 8 Jul 2022 09:56:17 -0200 [thread overview] Message-ID: <20220708115619.254073-2-kavyasree.kotagiri@microchip.com> (raw) In-Reply-To: <20220708115619.254073-1-kavyasree.kotagiri@microchip.com> Convert the Atmel flexcom device tree bindings to json schema. Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> --- v7 -> v8: - Added back patternProperties for child nodes. v6 -> v7: - Change filename to atmel,sama5d2-flexcom.yaml - Add #address-cells, #size-cells to flexcom node - Fixed warnings. v5 -> v6: - Removed spi node from example as suggested by Rob and also pattern properties(spi dt-bindings conversion to yaml patch is under review). Once that is accepted, I will add back spi example through new patch. v4 -> v5: - Fixed indentations. v3 -> v4: - Corrected format of enum used for compatible string. v2 -> v3: - used enum for compatible string. - changed irq flag to IRQ_TYPE_LEVEL_HIGH in example. - fixed dtschema errors. v1 -> v2: - Fix title. .../bindings/mfd/atmel,sama5d2-flexcom.yaml | 92 +++++++++++++++++++ .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------------- 2 files changed, 92 insertions(+), 63 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt diff --git a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml new file mode 100644 index 000000000000..bfa7d340a198 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Flexcom (Flexible Serial Communication Unit) + +maintainers: + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> + +description: + The Atmel Flexcom is just a wrapper which embeds a SPI controller, + an I2C controller and an USART. Only one function can be used at a + time and is chosen at boot time according to the device tree. + +properties: + compatible: + enum: + - atmel,sama5d2-flexcom + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + description: + One range for the full I/O register region. (including USART, + TWI and SPI registers). + items: + maxItems: 3 + + atmel,flexcom-mode: + description: | + Specifies the flexcom mode as follows: + 1: USART + 2: SPI + 3: I2C. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3] + +patternProperties: + "^serial@[0-9a-f]+$": + type: object + description: + Child node describing USART. See atmel-usart.txt for details + of USART bindings. + + "^spi@[0-9a-f]+$": + type: object + description: + Child node describing SPI. See ../spi/spi_atmel.txt for details + of SPI bindings. + + "^i2c@[0-9a-f]+$": + $ref: ../i2c/atmel,at91sam-i2c.yaml + description: + Child node describing I2C. + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + - ranges + - atmel,flexcom-mode + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + flx0: flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + atmel,flexcom-mode = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt deleted file mode 100644 index 9d837535637b..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt +++ /dev/null @@ -1,63 +0,0 @@ -* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) - -The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C -controller and an USART. Only one function can be used at a time and is chosen -at boot time according to the device tree. - -Required properties: -- compatible: Should be "atmel,sama5d2-flexcom" -- reg: Should be the offset/length value for Flexcom dedicated - I/O registers (without USART, TWI or SPI registers). -- clocks: Should be the Flexcom peripheral clock from PMC. -- #address-cells: Should be <1> -- #size-cells: Should be <1> -- ranges: Should be one range for the full I/O register region - (including USART, TWI and SPI registers). -- atmel,flexcom-mode: Should be one of the following values: - - <1> for USART - - <2> for SPI - - <3> for I2C - -Required child: -A single available child device of type matching the "atmel,flexcom-mode" -property. - -The phandle provided by the clocks property of the child is the same as one for -the Flexcom parent. - -For other properties, please refer to the documentations of the respective -device: -- ../serial/atmel-usart.txt -- ../spi/spi_atmel.txt -- ../i2c/i2c-at91.txt - -Example: - -flexcom@f8034000 { - compatible = "atmel,sama5d2-flexcom"; - reg = <0xf8034000 0x200>; - clocks = <&flx0_clk>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xf8034000 0x800>; - atmel,flexcom-mode = <2>; - - spi@400 { - compatible = "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flx0_default>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&flx0_clk>; - clock-names = "spi_clk"; - atmel,fifo-size = <32>; - - flash@0 { - compatible = "atmel,at25f512b"; - reg = <0>; - spi-max-frequency = <20000000>; - }; - }; -}; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-07-08 11:57 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-07-08 11:56 [PATCH v8 0/3] Add support for lan966x flexcom chip-select configuration Kavyasree Kotagiri 2022-07-08 11:56 ` Kavyasree Kotagiri 2022-07-08 11:56 ` Kavyasree Kotagiri [this message] 2022-07-08 11:56 ` [PATCH v8 1/3] dt-bindings: mfd: Convert atmel-flexcom to json-schema Kavyasree Kotagiri 2022-07-11 23:05 ` Rob Herring 2022-07-11 23:05 ` Rob Herring 2022-07-08 11:56 ` [PATCH v8 2/3] dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for lan966x Kavyasree Kotagiri 2022-07-08 11:56 ` Kavyasree Kotagiri 2022-07-11 23:06 ` Rob Herring 2022-07-11 23:06 ` Rob Herring 2022-07-08 11:56 ` [PATCH v8 3/3] mfd: atmel-flexcom: Add support for lan966x flexcom chip-select configuration Kavyasree Kotagiri 2022-07-08 11:56 ` Kavyasree Kotagiri 2022-07-12 6:54 ` Claudiu.Beznea 2022-07-12 6:54 ` Claudiu.Beznea 2022-09-05 7:53 ` [PATCH v8 0/3] " Kavyasree.Kotagiri 2022-09-05 7:53 ` Kavyasree.Kotagiri 2022-09-05 14:55 ` Lee Jones 2022-09-05 14:55 ` Lee Jones 2022-09-07 10:50 ` Kavyasree.Kotagiri 2022-09-07 10:50 ` Kavyasree.Kotagiri 2022-09-08 7:30 ` Lee Jones 2022-09-08 7:30 ` Lee Jones
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220708115619.254073-2-kavyasree.kotagiri@microchip.com \ --to=kavyasree.kotagiri@microchip.com \ --cc=UNGLinuxDriver@microchip.com \ --cc=alexandre.belloni@bootlin.com \ --cc=claudiu.beznea@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nicolas.ferre@microchip.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.