All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jiucheng Xu <jiucheng.xu@amlogic.com>
To: <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>, <devicetree@vger.kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Will Deacon <will@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Chris Healy <cphealy@gmail.com>,
	Jiucheng Xu <jiucheng.xu@amlogic.com>
Subject: [PATCH v2 3/4] arm64: dts: meson: Add DDR PMU node
Date: Wed, 27 Jul 2022 07:03:28 +0800	[thread overview]
Message-ID: <20220726230329.2844101-3-jiucheng.xu@amlogic.com> (raw)
In-Reply-To: <20220726230329.2844101-1-jiucheng.xu@amlogic.com>

Add DDR PMU device node for G12 series SoC

Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
---
Changes v1 -> v2:
  - Remove model, dmc_nr, chann_nr properties
  - Add g12a-ddr-pmu, g12b-ddr-pmu, sm1-ddr-pmu compatibles as
    identifier
---
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 7 +++++++
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi       | 4 ++++
 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi       | 4 ++++
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi        | 4 ++++
 4 files changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 45947c1031c4..7e556fe575be 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2146,6 +2146,13 @@ hdmi_tx_out: endpoint {
 			};
 		};
 
+		ddr_pmu: ddr_pmu@ff638000 {
+			compatible = "amlogic,g12-ddr-pmu";
+			reg = <0x0 0xff638000 0x0 0x100
+			       0x0 0xff638c00 0x0 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		gic: interrupt-controller@ffc01000 {
 			compatible = "arm,gic-400";
 			reg = <0x0 0xffc01000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index fb0ab27d1f64..4a32e081e70e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -133,3 +133,7 @@ map1 {
 		};
 	};
 };
+
+&ddr_pmu {
+	compatible = "amlogic,g12a-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index ee8fcae9f9f0..d91eca5a9afc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -139,3 +139,7 @@ map1 {
 &mali {
 	dma-coherent;
 };
+
+&ddr_pmu {
+	compatible = "amlogic,g12b-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 80737731af3f..7d62c661fde5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -543,3 +543,7 @@ &vpu {
 &usb {
 	power-domains = <&pwrc PWRC_SM1_USB_ID>;
 };
+
+&ddr_pmu {
+	compatible = "amlogic,sm1-ddr-pmu";
+};
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Jiucheng Xu <jiucheng.xu@amlogic.com>
To: <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>, <devicetree@vger.kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Will Deacon <will@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Chris Healy <cphealy@gmail.com>,
	Jiucheng Xu <jiucheng.xu@amlogic.com>
Subject: [PATCH v2 3/4] arm64: dts: meson: Add DDR PMU node
Date: Wed, 27 Jul 2022 07:03:28 +0800	[thread overview]
Message-ID: <20220726230329.2844101-3-jiucheng.xu@amlogic.com> (raw)
In-Reply-To: <20220726230329.2844101-1-jiucheng.xu@amlogic.com>

Add DDR PMU device node for G12 series SoC

Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
---
Changes v1 -> v2:
  - Remove model, dmc_nr, chann_nr properties
  - Add g12a-ddr-pmu, g12b-ddr-pmu, sm1-ddr-pmu compatibles as
    identifier
---
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 7 +++++++
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi       | 4 ++++
 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi       | 4 ++++
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi        | 4 ++++
 4 files changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 45947c1031c4..7e556fe575be 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2146,6 +2146,13 @@ hdmi_tx_out: endpoint {
 			};
 		};
 
+		ddr_pmu: ddr_pmu@ff638000 {
+			compatible = "amlogic,g12-ddr-pmu";
+			reg = <0x0 0xff638000 0x0 0x100
+			       0x0 0xff638c00 0x0 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		gic: interrupt-controller@ffc01000 {
 			compatible = "arm,gic-400";
 			reg = <0x0 0xffc01000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index fb0ab27d1f64..4a32e081e70e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -133,3 +133,7 @@ map1 {
 		};
 	};
 };
+
+&ddr_pmu {
+	compatible = "amlogic,g12a-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index ee8fcae9f9f0..d91eca5a9afc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -139,3 +139,7 @@ map1 {
 &mali {
 	dma-coherent;
 };
+
+&ddr_pmu {
+	compatible = "amlogic,g12b-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 80737731af3f..7d62c661fde5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -543,3 +543,7 @@ &vpu {
 &usb {
 	power-domains = <&pwrc PWRC_SM1_USB_ID>;
 };
+
+&ddr_pmu {
+	compatible = "amlogic,sm1-ddr-pmu";
+};
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

WARNING: multiple messages have this Message-ID (diff)
From: Jiucheng Xu <jiucheng.xu@amlogic.com>
To: <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>, <devicetree@vger.kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Will Deacon <will@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Chris Healy <cphealy@gmail.com>,
	Jiucheng Xu <jiucheng.xu@amlogic.com>
Subject: [PATCH v2 3/4] arm64: dts: meson: Add DDR PMU node
Date: Wed, 27 Jul 2022 07:03:28 +0800	[thread overview]
Message-ID: <20220726230329.2844101-3-jiucheng.xu@amlogic.com> (raw)
In-Reply-To: <20220726230329.2844101-1-jiucheng.xu@amlogic.com>

Add DDR PMU device node for G12 series SoC

Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
---
Changes v1 -> v2:
  - Remove model, dmc_nr, chann_nr properties
  - Add g12a-ddr-pmu, g12b-ddr-pmu, sm1-ddr-pmu compatibles as
    identifier
---
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 7 +++++++
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi       | 4 ++++
 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi       | 4 ++++
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi        | 4 ++++
 4 files changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 45947c1031c4..7e556fe575be 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2146,6 +2146,13 @@ hdmi_tx_out: endpoint {
 			};
 		};
 
+		ddr_pmu: ddr_pmu@ff638000 {
+			compatible = "amlogic,g12-ddr-pmu";
+			reg = <0x0 0xff638000 0x0 0x100
+			       0x0 0xff638c00 0x0 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		gic: interrupt-controller@ffc01000 {
 			compatible = "arm,gic-400";
 			reg = <0x0 0xffc01000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index fb0ab27d1f64..4a32e081e70e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -133,3 +133,7 @@ map1 {
 		};
 	};
 };
+
+&ddr_pmu {
+	compatible = "amlogic,g12a-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index ee8fcae9f9f0..d91eca5a9afc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -139,3 +139,7 @@ map1 {
 &mali {
 	dma-coherent;
 };
+
+&ddr_pmu {
+	compatible = "amlogic,g12b-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 80737731af3f..7d62c661fde5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -543,3 +543,7 @@ &vpu {
 &usb {
 	power-domains = <&pwrc PWRC_SM1_USB_ID>;
 };
+
+&ddr_pmu {
+	compatible = "amlogic,sm1-ddr-pmu";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-07-26 23:03 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-26 23:03 [PATCH v2 1/4] perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver Jiucheng Xu
2022-07-26 23:03 ` Jiucheng Xu
2022-07-26 23:03 ` Jiucheng Xu
2022-07-26 23:03 ` [PATCH v2 2/4] docs/perf: Add documentation for the Amlogic G12 DDR PMU Jiucheng Xu
2022-07-26 23:03   ` Jiucheng Xu
2022-07-26 23:03   ` Jiucheng Xu
2022-07-26 23:03 ` Jiucheng Xu [this message]
2022-07-26 23:03   ` [PATCH v2 3/4] arm64: dts: meson: Add DDR PMU node Jiucheng Xu
2022-07-26 23:03   ` Jiucheng Xu
2022-07-26 23:03 ` [PATCH v2 4/4] dt-binding: perf: Add Amlogic DDR PMU Jiucheng Xu
2022-07-26 23:03   ` Jiucheng Xu
2022-07-26 23:03   ` Jiucheng Xu
2022-07-27  3:36   ` Rob Herring
2022-07-27  3:36     ` Rob Herring
2022-07-27  3:36     ` Rob Herring
2022-07-27  7:09   ` Krzysztof Kozlowski
2022-07-27  7:09     ` Krzysztof Kozlowski
2022-07-27  7:09     ` Krzysztof Kozlowski
2022-07-28  9:50     ` Jiucheng Xu
2022-07-28  9:50       ` Jiucheng Xu
2022-07-28  9:50       ` Jiucheng Xu
2022-07-27 13:24 ` [PATCH v2 1/4] perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver kernel test robot
2022-07-27 13:24   ` kernel test robot
2022-07-27 13:24   ` kernel test robot
2022-07-28 11:03 ` Christian Hewitt
2022-07-28 11:03   ` Christian Hewitt
2022-07-28 11:03   ` Christian Hewitt
2022-07-29  3:38   ` Jiucheng Xu
2022-07-29  3:38     ` Jiucheng Xu
2022-07-29  3:38     ` Jiucheng Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220726230329.2844101-3-jiucheng.xu@amlogic.com \
    --to=jiucheng.xu@amlogic.com \
    --cc=cphealy@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=narmstrong@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.