From: Jisheng Zhang <jszhang@kernel.org> To: "Rob Herring" <robh+dt@kernel.org>, "Conor Dooley" <conor@kernel.org>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, "Paul Walmsley" <paul.walmsley@sifive.com>, "Palmer Dabbelt" <palmer@dabbelt.com>, "Albert Ou" <aou@eecs.berkeley.edu>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, "Jiri Slaby" <jirislaby@kernel.org>, "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com> Cc: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org Subject: [PATCH v2 0/9] riscv: add Bouffalolab bl808 support Date: Sun, 27 Nov 2022 21:24:39 +0800 [thread overview] Message-ID: <20221127132448.4034-1-jszhang@kernel.org> (raw) This series adds Bouffalolab uart driver and basic devicetrees for Bouffalolab bl808 SoC and Sipeed M1s dock board. It's too late for v6.2-rc1, but I hope I can catch up the v6.3-rc1 window. I think I have addressed all review comments to v1, correct me if I missed anything. PS: this series assumes the "thead,c906" riscv cpu binding patch is merged(I see Conor has picked up it). Since v1: - use FIELD_PREP and FIELD_GET macro - rewrite bflb_uart_tx_chars() - add vendor prefix for bouffalolab - add dt binding for bl808 compatibles - enable SOC_BOUFFALOLAB in defconfig - collect Reviewed-by tag - modify commit-msg as suggested Jisheng Zhang (9): dt-bindings: serial: add documentation for Bouffalolab UART Driver serial: bflb_uart: add Bouffalolab UART Driver riscv: add the Bouffalolab SoC family Kconfig option dt-bindings: vendor-prefixes: add bouffalolab dt-bindings: riscv: Add bouffalolab bl808 board compatibles riscv: dts: bouffalolab: add the bl808 SoC base device tree riscv: dts: bouffalolab: add Sipeed M1s SoM and Dock devicetree MAINTAINERS: riscv: add entry for Bouffalolab SoC riscv: defconfig: enable BOUFFALOLAB SoC .../bindings/riscv/bouffalolab.yaml | 34 + .../bindings/serial/bouffalolab,uart.yaml | 47 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 9 + arch/riscv/Kconfig.socs | 6 + arch/riscv/boot/dts/Makefile | 1 + arch/riscv/boot/dts/bouffalolab/Makefile | 2 + .../dts/bouffalolab/bl808-sipeed-m1s-dock.dts | 25 + .../dts/bouffalolab/bl808-sipeed-m1s.dtsi | 21 + arch/riscv/boot/dts/bouffalolab/bl808.dtsi | 74 +++ arch/riscv/configs/defconfig | 1 + drivers/tty/serial/Kconfig | 18 + drivers/tty/serial/Makefile | 1 + drivers/tty/serial/bflb_uart.c | 610 ++++++++++++++++++ include/uapi/linux/serial_core.h | 3 + 15 files changed, 854 insertions(+) create mode 100644 Documentation/devicetree/bindings/riscv/bouffalolab.yaml create mode 100644 Documentation/devicetree/bindings/serial/bouffalolab,uart.yaml create mode 100644 arch/riscv/boot/dts/bouffalolab/Makefile create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s-dock.dts create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s.dtsi create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808.dtsi create mode 100644 drivers/tty/serial/bflb_uart.c -- 2.38.1
WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang@kernel.org> To: "Rob Herring" <robh+dt@kernel.org>, "Conor Dooley" <conor@kernel.org>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, "Paul Walmsley" <paul.walmsley@sifive.com>, "Palmer Dabbelt" <palmer@dabbelt.com>, "Albert Ou" <aou@eecs.berkeley.edu>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, "Jiri Slaby" <jirislaby@kernel.org>, "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com> Cc: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org Subject: [PATCH v2 0/9] riscv: add Bouffalolab bl808 support Date: Sun, 27 Nov 2022 21:24:39 +0800 [thread overview] Message-ID: <20221127132448.4034-1-jszhang@kernel.org> (raw) This series adds Bouffalolab uart driver and basic devicetrees for Bouffalolab bl808 SoC and Sipeed M1s dock board. It's too late for v6.2-rc1, but I hope I can catch up the v6.3-rc1 window. I think I have addressed all review comments to v1, correct me if I missed anything. PS: this series assumes the "thead,c906" riscv cpu binding patch is merged(I see Conor has picked up it). Since v1: - use FIELD_PREP and FIELD_GET macro - rewrite bflb_uart_tx_chars() - add vendor prefix for bouffalolab - add dt binding for bl808 compatibles - enable SOC_BOUFFALOLAB in defconfig - collect Reviewed-by tag - modify commit-msg as suggested Jisheng Zhang (9): dt-bindings: serial: add documentation for Bouffalolab UART Driver serial: bflb_uart: add Bouffalolab UART Driver riscv: add the Bouffalolab SoC family Kconfig option dt-bindings: vendor-prefixes: add bouffalolab dt-bindings: riscv: Add bouffalolab bl808 board compatibles riscv: dts: bouffalolab: add the bl808 SoC base device tree riscv: dts: bouffalolab: add Sipeed M1s SoM and Dock devicetree MAINTAINERS: riscv: add entry for Bouffalolab SoC riscv: defconfig: enable BOUFFALOLAB SoC .../bindings/riscv/bouffalolab.yaml | 34 + .../bindings/serial/bouffalolab,uart.yaml | 47 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 9 + arch/riscv/Kconfig.socs | 6 + arch/riscv/boot/dts/Makefile | 1 + arch/riscv/boot/dts/bouffalolab/Makefile | 2 + .../dts/bouffalolab/bl808-sipeed-m1s-dock.dts | 25 + .../dts/bouffalolab/bl808-sipeed-m1s.dtsi | 21 + arch/riscv/boot/dts/bouffalolab/bl808.dtsi | 74 +++ arch/riscv/configs/defconfig | 1 + drivers/tty/serial/Kconfig | 18 + drivers/tty/serial/Makefile | 1 + drivers/tty/serial/bflb_uart.c | 610 ++++++++++++++++++ include/uapi/linux/serial_core.h | 3 + 15 files changed, 854 insertions(+) create mode 100644 Documentation/devicetree/bindings/riscv/bouffalolab.yaml create mode 100644 Documentation/devicetree/bindings/serial/bouffalolab,uart.yaml create mode 100644 arch/riscv/boot/dts/bouffalolab/Makefile create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s-dock.dts create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s.dtsi create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808.dtsi create mode 100644 drivers/tty/serial/bflb_uart.c -- 2.38.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2022-11-27 13:34 UTC|newest] Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-27 13:24 Jisheng Zhang [this message] 2022-11-27 13:24 ` [PATCH v2 0/9] riscv: add Bouffalolab bl808 support Jisheng Zhang 2022-11-27 13:24 ` [PATCH v2 1/9] dt-bindings: serial: add documentation for Bouffalolab UART Driver Jisheng Zhang 2022-11-27 13:24 ` Jisheng Zhang 2022-11-30 5:45 ` Samuel Holland 2022-11-30 5:45 ` Samuel Holland 2022-12-01 11:02 ` Krzysztof Kozlowski 2022-12-01 11:02 ` Krzysztof Kozlowski 2022-11-27 13:24 ` [PATCH v2 2/9] serial: bflb_uart: add " Jisheng Zhang 2022-11-27 13:24 ` Jisheng Zhang 2022-11-28 6:10 ` Jiri Slaby 2022-11-28 6:10 ` Jiri Slaby 2022-11-28 14:21 ` Jisheng Zhang 2022-11-28 14:21 ` Jisheng Zhang 2022-11-28 16:01 ` Ilpo Järvinen 2022-11-28 16:01 ` Ilpo Järvinen 2022-11-28 23:20 ` Jisheng Zhang 2022-11-28 23:20 ` Jisheng Zhang 2022-11-29 6:32 ` Jiri Slaby 2022-11-29 6:32 ` Jiri Slaby 2022-12-05 20:03 ` kernel test robot 2022-12-05 20:03 ` kernel test robot 2022-11-27 13:24 ` [PATCH v2 3/9] riscv: add the Bouffalolab SoC family Kconfig option Jisheng Zhang 2022-11-27 13:24 ` Jisheng Zhang 2022-11-30 6:48 ` Samuel Holland 2022-11-30 6:48 ` Samuel Holland 2022-11-27 13:24 ` [PATCH v2 4/9] dt-bindings: vendor-prefixes: add bouffalolab Jisheng Zhang 2022-11-27 13:24 ` Jisheng Zhang 2022-11-27 17:23 ` Conor Dooley 2022-11-27 17:23 ` Conor Dooley 2022-12-01 11:03 ` Krzysztof Kozlowski 2022-12-01 11:03 ` Krzysztof Kozlowski 2022-11-27 13:24 ` [PATCH v2 5/9] dt-bindings: riscv: Add bouffalolab bl808 board compatibles Jisheng Zhang 2022-11-27 13:24 ` Jisheng Zhang 2022-11-27 16:25 ` Rob Herring 2022-11-27 16:25 ` Rob Herring 2022-11-27 17:29 ` Conor Dooley 2022-11-27 17:29 ` Conor Dooley 2022-12-01 11:05 ` Krzysztof Kozlowski 2022-12-01 11:05 ` Krzysztof Kozlowski 2022-12-01 11:14 ` Conor Dooley 2022-12-01 11:14 ` Conor Dooley 2022-12-01 11:41 ` Krzysztof Kozlowski 2022-12-01 11:41 ` Krzysztof Kozlowski 2022-11-27 13:24 ` [PATCH v2 6/9] riscv: dts: bouffalolab: add the bl808 SoC base device tree Jisheng Zhang 2022-11-27 13:24 ` Jisheng Zhang 2022-11-27 17:21 ` Conor Dooley 2022-11-27 17:21 ` Conor Dooley 2022-11-28 9:52 ` Icenowy Zheng 2022-11-28 9:52 ` Icenowy Zheng 2022-11-28 14:52 ` Conor Dooley 2022-11-28 14:52 ` Conor Dooley 2022-11-30 7:21 ` Samuel Holland 2022-11-30 7:21 ` Samuel Holland 2022-12-05 8:17 ` Icenowy Zheng 2022-12-05 8:17 ` Icenowy Zheng 2022-12-05 10:29 ` Conor Dooley 2022-12-05 10:29 ` Conor Dooley 2023-01-04 8:32 ` Michael Walle 2023-01-04 8:32 ` Michael Walle 2022-11-27 13:24 ` [PATCH v2 7/9] riscv: dts: bouffalolab: add Sipeed M1s SoM and Dock devicetree Jisheng Zhang 2022-11-27 13:24 ` Jisheng Zhang 2022-11-27 17:32 ` Conor Dooley 2022-11-27 17:32 ` Conor Dooley 2022-11-30 7:25 ` Samuel Holland 2022-11-30 7:25 ` Samuel Holland 2022-12-05 8:15 ` Icenowy Zheng 2022-12-05 8:15 ` Icenowy Zheng 2022-11-27 13:24 ` [PATCH v2 8/9] MAINTAINERS: riscv: add entry for Bouffalolab SoC Jisheng Zhang 2022-11-27 13:24 ` Jisheng Zhang 2022-11-27 17:35 ` Conor Dooley 2022-11-27 17:35 ` Conor Dooley 2022-11-27 17:36 ` Conor Dooley 2022-11-27 17:36 ` Conor Dooley 2022-11-28 14:30 ` Jisheng Zhang 2022-11-28 14:30 ` Jisheng Zhang 2022-11-28 14:34 ` Jisheng Zhang 2022-11-28 14:34 ` Jisheng Zhang 2022-11-28 14:50 ` Conor Dooley 2022-11-28 14:50 ` Conor Dooley 2022-11-30 7:27 ` Samuel Holland 2022-11-30 7:27 ` Samuel Holland 2022-11-27 13:24 ` [PATCH v2 9/9] riscv: defconfig: enable BOUFFALOLAB SoC Jisheng Zhang 2022-11-27 13:24 ` Jisheng Zhang 2022-11-27 17:36 ` Conor Dooley 2022-11-27 17:36 ` Conor Dooley 2022-12-02 17:54 ` [PATCH v2 0/9] riscv: add Bouffalolab bl808 support Palmer Dabbelt 2022-12-02 17:54 ` Palmer Dabbelt
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221127132448.4034-1-jszhang@kernel.org \ --to=jszhang@kernel.org \ --cc=aou@eecs.berkeley.edu \ --cc=conor@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=ilpo.jarvinen@linux.intel.com \ --cc=jirislaby@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=linux-serial@vger.kernel.org \ --cc=palmer@dabbelt.com \ --cc=paul.walmsley@sifive.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.